From be01d3433fd2df8c6d834ac63414aa40c05e64a1 Mon Sep 17 00:00:00 2001 From: Paolo Bonzini Date: Mon, 5 Dec 2005 15:16:05 +0000 Subject: [PATCH] toplevel: 2005-12-05 Paolo Bonzini Sync with gcc: 2005-12-05 Paolo Bonzini * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. Find in-tree tools if available. (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. (COMPILER_*_FOR_TARGET): New. * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. (CONFIGURED_*, USUAL_*): Remove. (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, STRIP): Use autoconf substitutions. (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, COMPILER_NM_FOR_TARGET): New. (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. (all): Make all-host and all-target in parallel. (do-[+make_target+], do-check, install, [+compare-target+]): Ensure that $$r and $$s are set before invoking a recursive make. (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. ([+bootstrap-target+]): Inline most of the `all' target. 2005-11-29 Ben Elliston * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc from the gcc build directory. * Makefile.in: Regenerate. 2005-11-29 Ben Elliston * Makefile.def: Add new libdecnumber host_module. Make all-gcc depend on all-libdecnumber. * configure.in (host_libs): Include libdecnumber. * Makefile.in: Regenerate. * configure: Likewise. 2005-11-21 Kean Johnston * config.sub, config.guess: Sync from upstream sources. config: 2005-12-05 Paolo Bonzini * acx.m4 (GCC_TARGET_TOOL): New. --- ChangeLog | 47 ++ Makefile.def | 2 + Makefile.in | 1209 ++++++++++++++++++++++++++++++------------ Makefile.tpl | 383 +++---------- config.guess | 10 +- config.sub | 10 +- config/ChangeLog | 4 + config/acx.m4 | 31 ++ configure | 1326 ++++++++++++++++++++++++++++++++++------------ configure.in | 204 +++---- 10 files changed, 2136 insertions(+), 1090 deletions(-) diff --git a/ChangeLog b/ChangeLog index 82cd79f75ab..a1f37656430 100644 --- a/ChangeLog +++ b/ChangeLog @@ -1,3 +1,50 @@ +2005-12-05 Paolo Bonzini + + Sync with gcc: + + 2005-12-05 Paolo Bonzini + + * configure.in (CONFIGURED_BISON, CONFIGURED_YACC, CONFIGURED_M4, + CONFIGURED_FLEX, CONFIGURED_LEX, CONFIGURED_MAKEINFO): Remove + "CONFIGURED_" from the AC_CHECK_PROGS invocation. Move below. + Find in-tree tools if available. + (EXPECT, RUNTEST, LIPO, STRIP): Find them and substitute them. + (CONFIGURED_*_FOR_TARGET): Don't set nor substitute. + (*_FOR_TARGET): Set them with GCC_TARGET_TOOL. + (COMPILER_*_FOR_TARGET): New. + * Makefile.tpl (HOST_EXPORTS): Add *_FOR_TARGET symbols that gcc needs. + (BASE_TARGET_EXPORTS): Use COMPILER_*_FOR_TARGET symbols. + (CONFIGURED_*, USUAL_*): Remove. + (BISON, YACC, FLEX, LEX, M4, MAKEINFO, EXPECT, RUNTEST, LIPO, + STRIP): Use autoconf substitutions. + (COMPILER_AS_FOR_TARGET, COMPILER_LD_FOR_TARGET, + COMPILER_NM_FOR_TARGET): New. + (EXTRA_HOST_FLAGS): Pass LIPO and STRIP. + + (all): Make all-host and all-target in parallel. + (do-[+make_target+], do-check, install, [+compare-target+]): Ensure + that $$r and $$s are set before invoking a recursive make. + (stage[+id+]-bubble): Likewise, and invoke the comparison at the end. + ([+bootstrap-target+]): Inline most of the `all' target. + + 2005-11-29 Ben Elliston + + * Makefile.tpl (clean-target-libgcc): Invoke clean-target-libgcc + from the gcc build directory. + * Makefile.in: Regenerate. + + 2005-11-29 Ben Elliston + + * Makefile.def: Add new libdecnumber host_module. Make all-gcc + depend on all-libdecnumber. + * configure.in (host_libs): Include libdecnumber. + * Makefile.in: Regenerate. + * configure: Likewise. + + 2005-11-21 Kean Johnston + + * config.sub, config.guess: Sync from upstream sources. + 2005-11-11 Daniel Jacobowitz * Makefile.def: Remove gdb dependencies for gdbtk. diff --git a/Makefile.def b/Makefile.def index dc7d61291ab..f857a00bf23 100644 --- a/Makefile.def +++ b/Makefile.def @@ -75,6 +75,7 @@ host_modules= { module= tcl; host_modules= { module= itcl; }; host_modules= { module= ld; bootstrap=true; }; host_modules= { module= libcpp; bootstrap=true; }; +host_modules= { module= libdecnumber; bootstrap=true; }; host_modules= { module= libgui; }; host_modules= { module= libiberty; bootstrap=true; }; host_modules= { module= libtool; }; @@ -261,6 +262,7 @@ dependencies = { module=all-gcc; on=all-build-libiberty; }; dependencies = { module=all-gcc; on=all-build-fixincludes; }; dependencies = { module=all-gcc; on=all-zlib; }; dependencies = { module=all-gcc; on=all-libcpp; hard=true; }; +dependencies = { module=all-gcc; on=all-libdecnumber; hard=true; }; dependencies = { module=all-gcc; on=all-libiberty; }; dependencies = { module=all-gcc; on=all-fixincludes; }; dependencies = { module=install-gcc ; on=install-fixincludes; }; diff --git a/Makefile.in b/Makefile.in index fe0db6c4572..5bedd9e98cb 100644 --- a/Makefile.in +++ b/Makefile.in @@ -133,7 +133,8 @@ HOST_CONFIGARGS = @host_configargs@ # with srcdir=.. HOST_SUBDIR = @host_subdir@ # This is the list of variables to export in the environment when -# configuring subdirectories for the host system. +# configuring subdirectories for the host system. We need to pass +# some to the GCC configure because of its hybrid host/target nature. HOST_EXPORTS = \ $(BASE_EXPORTS) \ CC="$(CC)"; export CC; \ @@ -152,6 +153,13 @@ HOST_EXPORTS = \ WINDRES="$(WINDRES)"; export WINDRES; \ OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + AR_FOR_TARGET="$(AR_FOR_TARGET)"; export AR_FOR_TARGET; \ + AS_FOR_TARGET="$(AS_FOR_TARGET)"; export AS_FOR_TARGET; \ + GCC_FOR_TARGET="$(GCC_FOR_TARGET)"; export GCC_FOR_TARGET; \ + LD_FOR_TARGET="$(LD_FOR_TARGET)"; export LD_FOR_TARGET; \ + NM_FOR_TARGET="$(NM_FOR_TARGET)"; export NM_FOR_TARGET; \ + OBJDUMP_FOR_TARGET="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP_FOR_TARGET; \ + RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)"; export RANLIB_FOR_TARGET; \ TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ GMPLIBS="$(HOST_GMPLIBS)"; export GMPLIBS; \ GMPINC="$(HOST_GMPINC)"; export GMPINC; \ @@ -183,7 +191,7 @@ TARGET_CONFIGARGS = @target_configargs@ --with-target-subdir="$(TARGET_SUBDIR)" BASE_TARGET_EXPORTS = \ $(BASE_EXPORTS) \ AR="$(AR_FOR_TARGET)"; export AR; \ - AS="$(AS_FOR_TARGET)"; export AS; \ + AS="$(COMPILER_AS_FOR_TARGET)"; export AS; \ CC="$(CC_FOR_TARGET)"; export CC; \ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ @@ -192,10 +200,10 @@ BASE_TARGET_EXPORTS = \ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ GFORTRAN="$(GFORTRAN_FOR_TARGET)"; export GFORTRAN; \ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ - LD="$(LD_FOR_TARGET)"; export LD; \ + LD="$(COMPILER_LD_FOR_TARGET)"; export LD; \ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ LIPO="$(LIPO_FOR_TARGET)"; export LIPO; \ - NM="$(NM_FOR_TARGET)"; export NM; \ + NM="$(COMPILER_NM_FOR_TARGET)"; export NM; \ OBJDUMP="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP; \ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ STRIP="$(STRIP_FOR_TARGET)"; export STRIP; \ @@ -245,47 +253,14 @@ BUILD_PREFIX_1 = @BUILD_PREFIX_1@ # here so that they can be overridden by Makefile fragments. BOOT_CFLAGS= -g -O2 -CONFIGURED_BISON = @CONFIGURED_BISON@ -BISON = `if [ -f $$r/$(BUILD_SUBDIR)/bison/tests/bison ] ; then \ - echo $$r/$(BUILD_SUBDIR)/bison/tests/bison ; \ - else \ - echo ${CONFIGURED_BISON} ; \ - fi` - -CONFIGURED_YACC = @CONFIGURED_YACC@ -YACC = `if [ -f $$r/$(BUILD_SUBDIR)/bison/tests/bison ] ; then \ - echo $$r/$(BUILD_SUBDIR)/bison/tests/bison -y ; \ - elif [ -f $$r/$(BUILD_SUBDIR)/byacc/byacc ] ; then \ - echo $$r/$(BUILD_SUBDIR)/byacc/byacc ; \ - else \ - echo ${CONFIGURED_YACC} ; \ - fi` - -CONFIGURED_FLEX = @CONFIGURED_FLEX@ -FLEX = `if [ -f $$r/$(BUILD_SUBDIR)/flex/flex ] ; \ - then echo $$r/$(BUILD_SUBDIR)/flex/flex ; \ - else echo ${CONFIGURED_FLEX} ; fi` - -CONFIGURED_LEX = @CONFIGURED_LEX@ -LEX = `if [ -f $$r/$(BUILD_SUBDIR)/flex/flex ] ; \ - then echo $$r/$(BUILD_SUBDIR)/flex/flex ; \ - else echo ${CONFIGURED_LEX} ; fi` - -CONFIGURED_M4 = @CONFIGURED_M4@ -M4 = `if [ -f $$r/$(BUILD_SUBDIR)/m4/m4 ] ; \ - then echo $$r/$(BUILD_SUBDIR)/m4/m4 ; \ - else echo ${CONFIGURED_M4} ; fi` - -# For an installed makeinfo, we require it to be from texinfo 4.2 or -# higher, else we use the "missing" dummy. We also pass the subdirectory -# makeinfo even if only the Makefile is there, because Texinfo builds its -# manual when made, and it requires its own version. -CONFIGURED_MAKEINFO = @CONFIGURED_MAKEINFO@ -MAKEINFO = `if [ -f $$r/$(BUILD_SUBDIR)/texinfo/makeinfo/Makefile ] ; \ - then echo $$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo ; \ - else if (${CONFIGURED_MAKEINFO} --version \ - | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])') >/dev/null 2>&1; \ - then echo ${CONFIGURED_MAKEINFO}; else echo $$s/missing makeinfo; fi; fi` +BISON = @BISON@ +YACC = @YACC@ +FLEX = @FLEX@ +LEX = @LEX@ +M4 = @M4@ +MAKEINFO = @MAKEINFO@ +EXPECT = @EXPECT@ +RUNTEST = @RUNTEST@ # This just becomes part of the MAKEINFO definition passed down to # sub-makes. It lets flags be given on the command line while still @@ -293,43 +268,28 @@ MAKEINFO = `if [ -f $$r/$(BUILD_SUBDIR)/texinfo/makeinfo/Makefile ] ; \ # (Default to avoid splitting info files by setting the threshold high.) MAKEINFOFLAGS = --split-size=5000000 -# FIXME: expect may become a build tool? -EXPECT = `if [ -f $$r/$(HOST_SUBDIR)/expect/expect ] ; \ - then echo $$r/$(HOST_SUBDIR)/expect/expect ; \ - else echo expect ; fi` - -RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \ - then echo $$s/dejagnu/runtest ; \ - else echo runtest ; fi` - # --------------------------------------------- # Programs producing files for the HOST machine # --------------------------------------------- AS = @AS@ - AR = @AR@ AR_FLAGS = rc - CC = @CC@ -CFLAGS = @CFLAGS@ -LIBCFLAGS = $(CFLAGS) - CXX = @CXX@ -CXXFLAGS = @CXXFLAGS@ -LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates - DLLTOOL = @DLLTOOL@ - -NM = @NM@ - LD = @LD@ -LDFLAGS = - +LIPO = @LIPO@ +NM = @NM@ RANLIB = @RANLIB@ - +STRIP = @STRIP@ WINDRES = @WINDRES@ +CFLAGS = @CFLAGS@ +LDFLAGS = +LIBCFLAGS = $(CFLAGS) +CXXFLAGS = @CXXFLAGS@ +LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates PICFLAG = # ----------------------------------------------- @@ -339,242 +299,42 @@ PICFLAG = FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@ AR_FOR_TARGET=@AR_FOR_TARGET@ -CONFIGURED_AR_FOR_TARGET=@CONFIGURED_AR_FOR_TARGET@ -USUAL_AR_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/binutils/ar ] ; then \ - echo $$r/$(HOST_SUBDIR)/binutils/ar ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(AR); \ - else \ - echo $(CONFIGURED_AR_FOR_TARGET) ; \ - fi; \ - fi` - AS_FOR_TARGET=@AS_FOR_TARGET@ -CONFIGURED_AS_FOR_TARGET=@CONFIGURED_AS_FOR_TARGET@ -USUAL_AS_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/gas/as-new ] ; then \ - echo $$r/$(HOST_SUBDIR)/gas/as-new ; \ - elif [ -f $$r/$(HOST_SUBDIR)/gcc/as ]; then \ - echo $$r/$(HOST_SUBDIR)/gcc/as ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(AS); \ - else \ - echo $(CONFIGURED_AS_FOR_TARGET) ; \ - fi; \ - fi` - CC_FOR_TARGET=$(STAGE_CC_WRAPPER) @CC_FOR_TARGET@ $(FLAGS_FOR_TARGET) -CONFIGURED_CC_FOR_TARGET=@CONFIGURED_CC_FOR_TARGET@ -USUAL_CC_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/gcc/xgcc ] ; then \ - echo $$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/ ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(CC); \ - else \ - echo $(CONFIGURED_CC_FOR_TARGET) ; \ - fi; \ - fi` - -# During gcc bootstrap, if we use some random cc for stage1 then -# CFLAGS will be just -g. We want to ensure that TARGET libraries -# (which we know are built with gcc) are built with optimizations so -# prepend -O2 when setting CFLAGS_FOR_TARGET. -CFLAGS_FOR_TARGET = -O2 $(CFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET) -SYSROOT_CFLAGS_FOR_TARGET = @SYSROOT_CFLAGS_FOR_TARGET@ # If GCC_FOR_TARGET is not overriden on the command line, then this # variable is passed down to the gcc Makefile, where it is used to # build libgcc2.a. We define it here so that it can itself be # overridden on the command line. -GCC_FOR_TARGET=@GCC_FOR_TARGET@ -CONFIGURED_GCC_FOR_TARGET=@CONFIGURED_GCC_FOR_TARGET@ -USUAL_GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) \ - $$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/ $(FLAGS_FOR_TARGET) -LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET) - +GCC_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCC_FOR_TARGET@ $(FLAGS_FOR_TARGET) CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @CXX_FOR_TARGET@ $(FLAGS_FOR_TARGET) -CONFIGURED_CXX_FOR_TARGET=@CONFIGURED_CXX_FOR_TARGET@ -USUAL_CXX_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/gcc/g++ ] ; then \ - (echo $$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++; \ - test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; \ - echo -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs) | tr '\015\012' ' '; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(CXX); \ - else \ - echo $(CONFIGURED_CXX_FOR_TARGET) ; \ - fi; \ - fi` - RAW_CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @RAW_CXX_FOR_TARGET@ $(FLAGS_FOR_TARGET) -USUAL_RAW_CXX_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/gcc/xgcc ] ; then \ - echo $$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(CXX); \ - else \ - echo $(CONFIGURED_CXX_FOR_TARGET) ; \ - fi; \ - fi` - -CXXFLAGS_FOR_TARGET = $(CXXFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET) -LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates - GCJ_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCJ_FOR_TARGET@ $(FLAGS_FOR_TARGET) -CONFIGURED_GCJ_FOR_TARGET=@CONFIGURED_GCJ_FOR_TARGET@ -USUAL_GCJ_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/gcc/gcj ] ; then \ - echo $$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(GCJ); \ - else \ - echo $(CONFIGURED_GCJ_FOR_TARGET) ; \ - fi; \ - fi` - GFORTRAN_FOR_TARGET=$(STAGE_CC_WRAPPER) @GFORTRAN_FOR_TARGET@ $(FLAGS_FOR_TARGET) -CONFIGURED_GFORTRAN_FOR_TARGET=@CONFIGURED_GFORTRAN_FOR_TARGET@ -USUAL_GFORTRAN_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/gcc/gfortran ] ; then \ - echo $$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(GFORTRAN); \ - else \ - echo $(CONFIGURED_GFORTRAN_FOR_TARGET) ; \ - fi; \ - fi` - - DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@ -CONFIGURED_DLLTOOL_FOR_TARGET=@CONFIGURED_DLLTOOL_FOR_TARGET@ -USUAL_DLLTOOL_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/binutils/dlltool ] ; then \ - echo $$r/$(HOST_SUBDIR)/binutils/dlltool ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(DLLTOOL); \ - else \ - echo $(CONFIGURED_DLLTOOL_FOR_TARGET) ; \ - fi; \ - fi` - LD_FOR_TARGET=@LD_FOR_TARGET@ -CONFIGURED_LD_FOR_TARGET=@CONFIGURED_LD_FOR_TARGET@ -USUAL_LD_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/ld/ld-new ] ; then \ - echo $$r/$(HOST_SUBDIR)/ld/ld-new ; \ - elif [ -f $$r/$(HOST_SUBDIR)/gcc/collect-ld ]; then \ - echo $$r/$(HOST_SUBDIR)/gcc/collect-ld ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(LD); \ - else \ - echo $(CONFIGURED_LD_FOR_TARGET) ; \ - fi; \ - fi` - -LDFLAGS_FOR_TARGET = LIPO_FOR_TARGET=@LIPO_FOR_TARGET@ -CONFIGURED_LIPO_FOR_TARGET=@CONFIGURED_LIPO_FOR_TARGET@ -USUAL_LIPO_FOR_TARGET = ` \ - if [ '$(host)' = '$(target)' ] ; then \ - if [ x'$(LIPO)' != x ]; then \ - echo $(LIPO); \ - else \ - echo lipo; \ - fi; \ - else \ - echo $(CONFIGURED_LIPO_FOR_TARGET) ; \ - fi` - NM_FOR_TARGET=@NM_FOR_TARGET@ -CONFIGURED_NM_FOR_TARGET=@CONFIGURED_NM_FOR_TARGET@ -USUAL_NM_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/binutils/nm-new ] ; then \ - echo $$r/$(HOST_SUBDIR)/binutils/nm-new ; \ - elif [ -f $$r/$(HOST_SUBDIR)/gcc/nm ]; then \ - echo $$r/$(HOST_SUBDIR)/gcc/nm ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(NM); \ - else \ - echo $(CONFIGURED_NM_FOR_TARGET) ; \ - fi; \ - fi` - OBJDUMP_FOR_TARGET=@OBJDUMP_FOR_TARGET@ -CONFIGURED_OBJDUMP_FOR_TARGET=@CONFIGURED_OBJDUMP_FOR_TARGET@ -USUAL_OBJDUMP_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/binutils/objdump ] ; then \ - echo $$r/$(HOST_SUBDIR)/binutils/objdump ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - if [ x'$(OBJDUMP)' != x ]; then \ - echo $(OBJDUMP); \ - else \ - echo objdump; \ - fi; \ - else \ - echo $(CONFIGURED_OBJDUMP_FOR_TARGET) ; \ - fi; \ - fi` - RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@ -CONFIGURED_RANLIB_FOR_TARGET=@CONFIGURED_RANLIB_FOR_TARGET@ -USUAL_RANLIB_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/binutils/ranlib ] ; then \ - echo $$r/$(HOST_SUBDIR)/binutils/ranlib ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - if [ x'$(RANLIB)' != x ]; then \ - echo $(RANLIB); \ - else \ - echo ranlib; \ - fi; \ - else \ - echo $(CONFIGURED_RANLIB_FOR_TARGET) ; \ - fi; \ - fi` - STRIP_FOR_TARGET=@STRIP_FOR_TARGET@ -CONFIGURED_STRIP_FOR_TARGET=@CONFIGURED_STRIP_FOR_TARGET@ -USUAL_STRIP_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/binutils/strip ] ; then \ - echo $$r/$(HOST_SUBDIR)/binutils/strip ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - if [ x'$(STRIP)' != x ]; then \ - echo $(STRIP); \ - else \ - echo strip; \ - fi; \ - else \ - echo $(CONFIGURED_STRIP_FOR_TARGET) ; \ - fi; \ - fi` - WINDRES_FOR_TARGET=@WINDRES_FOR_TARGET@ -CONFIGURED_WINDRES_FOR_TARGET=@CONFIGURED_WINDRES_FOR_TARGET@ -USUAL_WINDRES_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/binutils/windres ] ; then \ - echo $$r/$(HOST_SUBDIR)/binutils/windres ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(WINDRES); \ - else \ - echo $(CONFIGURED_WINDRES_FOR_TARGET) ; \ - fi; \ - fi` +COMPILER_AS_FOR_TARGET=@COMPILER_AS_FOR_TARGET@ +COMPILER_LD_FOR_TARGET=@COMPILER_LD_FOR_TARGET@ +COMPILER_NM_FOR_TARGET=@COMPILER_NM_FOR_TARGET@ + +# During gcc bootstrap, if we use some random cc for stage1 then +# CFLAGS will be just -g. We want to ensure that TARGET libraries +# (which we know are built with gcc) are built with optimizations so +# prepend -O2 when setting CFLAGS_FOR_TARGET. +CFLAGS_FOR_TARGET = -O2 $(CFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET) +SYSROOT_CFLAGS_FOR_TARGET = @SYSROOT_CFLAGS_FOR_TARGET@ +CXXFLAGS_FOR_TARGET = $(CXXFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET) +LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET) +LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates +LDFLAGS_FOR_TARGET = PICFLAG_FOR_TARGET = # ------------------------------------ @@ -712,8 +472,10 @@ EXTRA_HOST_FLAGS = \ 'CXX=$(CXX)' \ 'DLLTOOL=$(DLLTOOL)' \ 'LD=$(LD)' \ + 'LIPO=$(LIPO)' \ 'NM=$(NM)' \ 'RANLIB=$(RANLIB)' \ + 'STRIP=$(STRIP)' \ 'WINDRES=$(WINDRES)' FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) @@ -735,17 +497,17 @@ X11_FLAGS_TO_PASS = \ # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them. EXTRA_TARGET_FLAGS = \ 'AR=$$(AR_FOR_TARGET)' \ - 'AS=$$(AS_FOR_TARGET)' \ + 'AS=$$(COMPILER_AS_FOR_TARGET)' \ 'CC=$$(CC_FOR_TARGET)' \ 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \ 'CXX=$$(CXX_FOR_TARGET)' \ 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \ 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \ - 'LD=$$(LD_FOR_TARGET)' \ + 'LD=$$(COMPILER_LD_FOR_TARGET)' \ 'LDFLAGS=$$(LDFLAGS_FOR_TARGET)' \ 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \ 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \ - 'NM=$$(NM_FOR_TARGET)' \ + 'NM=$$(COMPILER_NM_FOR_TARGET)' \ 'OBJDUMP=$$(OBJDUMP_FOR_TARGET)' \ 'RANLIB=$$(RANLIB_FOR_TARGET)' \ 'WINDRES=$$(WINDRES_FOR_TARGET)' @@ -810,6 +572,7 @@ configure-host: \ maybe-configure-itcl \ maybe-configure-ld \ maybe-configure-libcpp \ + maybe-configure-libdecnumber \ maybe-configure-libgui \ maybe-configure-libiberty \ maybe-configure-libtool \ @@ -869,28 +632,19 @@ configure-target: \ .PHONY: all all: @if gcc-bootstrap + [ -f stage_final ] || echo stage3 > stage_final @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - if [ ! -f stage_last ]; then \ - $(MAKE) $(RECURSE_FLAGS_TO_PASS) bootstrap; \ - fi + $(MAKE) $(RECURSE_FLAGS_TO_PASS) `cat stage_final`-bubble; \ @endif gcc-bootstrap @$(unstage) -@if gcc-no-bootstrap - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-prebootstrap -@endif gcc-no-bootstrap @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ if [ -f stage_last ]; then \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target; \ else \ - $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-host; \ + $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-host all-target; \ fi - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-target @$(stage) .PHONY: all-build @@ -938,6 +692,7 @@ all-host: \ maybe-all-itcl \ maybe-all-ld \ maybe-all-libcpp \ + maybe-all-libdecnumber \ maybe-all-libgui \ maybe-all-libiberty \ maybe-all-libtool \ @@ -1044,6 +799,7 @@ info-host: \ maybe-info-itcl \ maybe-info-ld \ maybe-info-libcpp \ + maybe-info-libdecnumber \ maybe-info-libgui \ maybe-info-libiberty \ maybe-info-libtool \ @@ -1146,6 +902,7 @@ dvi-host: \ maybe-dvi-itcl \ maybe-dvi-ld \ maybe-dvi-libcpp \ + maybe-dvi-libdecnumber \ maybe-dvi-libgui \ maybe-dvi-libiberty \ maybe-dvi-libtool \ @@ -1248,6 +1005,7 @@ html-host: \ maybe-html-itcl \ maybe-html-ld \ maybe-html-libcpp \ + maybe-html-libdecnumber \ maybe-html-libgui \ maybe-html-libiberty \ maybe-html-libtool \ @@ -1350,6 +1108,7 @@ TAGS-host: \ maybe-TAGS-itcl \ maybe-TAGS-ld \ maybe-TAGS-libcpp \ + maybe-TAGS-libdecnumber \ maybe-TAGS-libgui \ maybe-TAGS-libiberty \ maybe-TAGS-libtool \ @@ -1452,6 +1211,7 @@ install-info-host: \ maybe-install-info-itcl \ maybe-install-info-ld \ maybe-install-info-libcpp \ + maybe-install-info-libdecnumber \ maybe-install-info-libgui \ maybe-install-info-libiberty \ maybe-install-info-libtool \ @@ -1554,6 +1314,7 @@ installcheck-host: \ maybe-installcheck-itcl \ maybe-installcheck-ld \ maybe-installcheck-libcpp \ + maybe-installcheck-libdecnumber \ maybe-installcheck-libgui \ maybe-installcheck-libiberty \ maybe-installcheck-libtool \ @@ -1656,6 +1417,7 @@ mostlyclean-host: \ maybe-mostlyclean-itcl \ maybe-mostlyclean-ld \ maybe-mostlyclean-libcpp \ + maybe-mostlyclean-libdecnumber \ maybe-mostlyclean-libgui \ maybe-mostlyclean-libiberty \ maybe-mostlyclean-libtool \ @@ -1758,6 +1520,7 @@ clean-host: \ maybe-clean-itcl \ maybe-clean-ld \ maybe-clean-libcpp \ + maybe-clean-libdecnumber \ maybe-clean-libgui \ maybe-clean-libiberty \ maybe-clean-libtool \ @@ -1860,6 +1623,7 @@ distclean-host: \ maybe-distclean-itcl \ maybe-distclean-ld \ maybe-distclean-libcpp \ + maybe-distclean-libdecnumber \ maybe-distclean-libgui \ maybe-distclean-libiberty \ maybe-distclean-libtool \ @@ -1962,6 +1726,7 @@ maintainer-clean-host: \ maybe-maintainer-clean-itcl \ maybe-maintainer-clean-ld \ maybe-maintainer-clean-libcpp \ + maybe-maintainer-clean-libdecnumber \ maybe-maintainer-clean-libgui \ maybe-maintainer-clean-libiberty \ maybe-maintainer-clean-libtool \ @@ -2069,14 +1834,10 @@ maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean maintainer-clean: local-distclean realclean: maintainer-clean -# Extra dependency for clean-target, owing to the mixed nature of gcc +# Extra dependency for clean-target, owing to the mixed nature of gcc. clean-target: clean-target-libgcc clean-target-libgcc: - test ! -d gcc/libgcc || \ - (cd gcc/libgcc && find . -type d -print) | \ - while read d; do rm -f gcc/$$d/libgcc.a || : ; done - -rm -rf gcc/libgcc - -rm -f gcc/stmp-dirs + test ! -d gcc || (cd gcc && $(MAKE) $@) # Check target. @@ -2120,6 +1881,7 @@ check-host: \ maybe-check-itcl \ maybe-check-ld \ maybe-check-libcpp \ + maybe-check-libdecnumber \ maybe-check-libgui \ maybe-check-libiberty \ maybe-check-libtool \ @@ -2249,6 +2011,7 @@ install-host-nogcc: \ maybe-install-itcl \ maybe-install-ld \ maybe-install-libcpp \ + maybe-install-libdecnumber \ maybe-install-libgui \ maybe-install-libiberty \ maybe-install-libtool \ @@ -2319,6 +2082,7 @@ install-host: \ maybe-install-itcl \ maybe-install-ld \ maybe-install-libcpp \ + maybe-install-libdecnumber \ maybe-install-libgui \ maybe-install-libiberty \ maybe-install-libtool \ @@ -16763,6 +16527,670 @@ maintainer-clean-libcpp: +.PHONY: configure-libdecnumber maybe-configure-libdecnumber +maybe-configure-libdecnumber: +@if libdecnumber +maybe-configure-libdecnumber: configure-libdecnumber +configure-libdecnumber: + @test -f stage_last && exit 0; \ + test ! -f $(HOST_SUBDIR)/libdecnumber/Makefile || exit 0; \ + $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR)/libdecnumber ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + echo Configuring in $(HOST_SUBDIR)/libdecnumber; \ + cd "$(HOST_SUBDIR)/libdecnumber" || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \ + *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \ + sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \ + esac; \ + srcdiroption="--srcdir=$${topdir}/libdecnumber"; \ + libsrcdir="$$s/libdecnumber"; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + || exit 1 +@endif libdecnumber + + + +.PHONY: configure-stage1-libdecnumber maybe-configure-stage1-libdecnumber +maybe-configure-stage1-libdecnumber: +@if libdecnumber-bootstrap +maybe-configure-stage1-libdecnumber: configure-stage1-libdecnumber +configure-stage1-libdecnumber: + @[ `cat stage_current` = stage1 ] || $(MAKE) stage1-start + @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + echo Configuring stage 1 in $(HOST_SUBDIR)/libdecnumber ; \ + cd $(HOST_SUBDIR)/libdecnumber || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \ + *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \ + sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \ + esac; \ + srcdiroption="--srcdir=$${topdir}/libdecnumber"; \ + libsrcdir="$$s/libdecnumber"; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + --disable-intermodule --disable-coverage --enable-languages="$(STAGE1_LANGUAGES)" +@endif libdecnumber-bootstrap + +.PHONY: configure-stage2-libdecnumber maybe-configure-stage2-libdecnumber +maybe-configure-stage2-libdecnumber: +@if libdecnumber-bootstrap +maybe-configure-stage2-libdecnumber: configure-stage2-libdecnumber +configure-stage2-libdecnumber: + @[ `cat stage_current` = stage2 ] || $(MAKE) stage2-start + @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + $(POSTSTAGE1_HOST_EXPORTS) \ + echo Configuring stage 2 in $(HOST_SUBDIR)/libdecnumber ; \ + cd $(HOST_SUBDIR)/libdecnumber || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \ + *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \ + sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \ + esac; \ + srcdiroption="--srcdir=$${topdir}/libdecnumber"; \ + libsrcdir="$$s/libdecnumber"; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + @stage2_werror_flag@ +@endif libdecnumber-bootstrap + +.PHONY: configure-stage3-libdecnumber maybe-configure-stage3-libdecnumber +maybe-configure-stage3-libdecnumber: +@if libdecnumber-bootstrap +maybe-configure-stage3-libdecnumber: configure-stage3-libdecnumber +configure-stage3-libdecnumber: + @[ `cat stage_current` = stage3 ] || $(MAKE) stage3-start + @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + $(POSTSTAGE1_HOST_EXPORTS) \ + echo Configuring stage 3 in $(HOST_SUBDIR)/libdecnumber ; \ + cd $(HOST_SUBDIR)/libdecnumber || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \ + *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \ + sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \ + esac; \ + srcdiroption="--srcdir=$${topdir}/libdecnumber"; \ + libsrcdir="$$s/libdecnumber"; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + @stage2_werror_flag@ +@endif libdecnumber-bootstrap + +.PHONY: configure-stage4-libdecnumber maybe-configure-stage4-libdecnumber +maybe-configure-stage4-libdecnumber: +@if libdecnumber-bootstrap +maybe-configure-stage4-libdecnumber: configure-stage4-libdecnumber +configure-stage4-libdecnumber: + @[ `cat stage_current` = stage4 ] || $(MAKE) stage4-start + @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + $(POSTSTAGE1_HOST_EXPORTS) \ + echo Configuring stage 4 in $(HOST_SUBDIR)/libdecnumber ; \ + cd $(HOST_SUBDIR)/libdecnumber || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \ + *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \ + sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \ + esac; \ + srcdiroption="--srcdir=$${topdir}/libdecnumber"; \ + libsrcdir="$$s/libdecnumber"; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + @stage2_werror_flag@ +@endif libdecnumber-bootstrap + +.PHONY: configure-stageprofile-libdecnumber maybe-configure-stageprofile-libdecnumber +maybe-configure-stageprofile-libdecnumber: +@if libdecnumber-bootstrap +maybe-configure-stageprofile-libdecnumber: configure-stageprofile-libdecnumber +configure-stageprofile-libdecnumber: + @[ `cat stage_current` = stageprofile ] || $(MAKE) stageprofile-start + @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + $(POSTSTAGE1_HOST_EXPORTS) \ + echo Configuring stage profile in $(HOST_SUBDIR)/libdecnumber ; \ + cd $(HOST_SUBDIR)/libdecnumber || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \ + *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \ + sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \ + esac; \ + srcdiroption="--srcdir=$${topdir}/libdecnumber"; \ + libsrcdir="$$s/libdecnumber"; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + @stage2_werror_flag@ +@endif libdecnumber-bootstrap + +.PHONY: configure-stagefeedback-libdecnumber maybe-configure-stagefeedback-libdecnumber +maybe-configure-stagefeedback-libdecnumber: +@if libdecnumber-bootstrap +maybe-configure-stagefeedback-libdecnumber: configure-stagefeedback-libdecnumber +configure-stagefeedback-libdecnumber: + @[ `cat stage_current` = stagefeedback ] || $(MAKE) stagefeedback-start + @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] && exit 0 || : ; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + $(POSTSTAGE1_HOST_EXPORTS) \ + echo Configuring stage feedback in $(HOST_SUBDIR)/libdecnumber ; \ + cd $(HOST_SUBDIR)/libdecnumber || exit 1; \ + case $(srcdir) in \ + /* | [A-Za-z]:[\\/]*) topdir=$(srcdir) ;; \ + *) topdir=`echo $(HOST_SUBDIR)/libdecnumber/ | \ + sed -e 's,\./,,g' -e 's,[^/]*/,../,g' `$(srcdir) ;; \ + esac; \ + srcdiroption="--srcdir=$${topdir}/libdecnumber"; \ + libsrcdir="$$s/libdecnumber"; \ + $(SHELL) $${libsrcdir}/configure \ + $(HOST_CONFIGARGS) $${srcdiroption} \ + @stage2_werror_flag@ +@endif libdecnumber-bootstrap + + + + + +.PHONY: all-libdecnumber maybe-all-libdecnumber +maybe-all-libdecnumber: +@if libdecnumber +TARGET-libdecnumber=all +maybe-all-libdecnumber: all-libdecnumber +all-libdecnumber: configure-libdecnumber + @test -f stage_last && exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + (cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(FLAGS_TO_PASS) $(TARGET-libdecnumber)) +@endif libdecnumber + + + +.PHONY: all-stage1-libdecnumber maybe-all-stage1-libdecnumber +.PHONY: clean-stage1-libdecnumber maybe-clean-stage1-libdecnumber +maybe-all-stage1-libdecnumber: +maybe-clean-stage1-libdecnumber: +@if libdecnumber-bootstrap +maybe-all-stage1-libdecnumber: all-stage1-libdecnumber +all-stage1: all-stage1-libdecnumber +TARGET-stage1-libdecnumber = $(TARGET-libdecnumber) +all-stage1-libdecnumber: configure-stage1-libdecnumber + @[ `cat stage_current` = stage1 ] || $(MAKE) stage1-start + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(FLAGS_TO_PASS) CFLAGS="$(STAGE1_CFLAGS)" \ + $(TARGET-stage1-libdecnumber) + +maybe-clean-stage1-libdecnumber: clean-stage1-libdecnumber +clean-stage1: clean-stage1-libdecnumber +clean-stage1-libdecnumber: + @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stage1-libdecnumber/Makefile ] \ + || exit 0 ; \ + @[ `cat stage_current` = stage1 ] || $(MAKE) stage1-start + cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(FLAGS_TO_PASS) \ + CFLAGS="$(STAGE1_CFLAGS)" clean +@endif libdecnumber-bootstrap + + +.PHONY: all-stage2-libdecnumber maybe-all-stage2-libdecnumber +.PHONY: clean-stage2-libdecnumber maybe-clean-stage2-libdecnumber +maybe-all-stage2-libdecnumber: +maybe-clean-stage2-libdecnumber: +@if libdecnumber-bootstrap +maybe-all-stage2-libdecnumber: all-stage2-libdecnumber +all-stage2: all-stage2-libdecnumber +TARGET-stage2-libdecnumber = $(TARGET-libdecnumber) +all-stage2-libdecnumber: configure-stage2-libdecnumber + @[ `cat stage_current` = stage2 ] || $(MAKE) stage2-start + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + $(POSTSTAGE1_HOST_EXPORTS) \ + cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(FLAGS_TO_PASS) $(POSTSTAGE1_FLAGS_TO_PASS) \ + $(TARGET-stage2-libdecnumber) + +maybe-clean-stage2-libdecnumber: clean-stage2-libdecnumber +clean-stage2: clean-stage2-libdecnumber +clean-stage2-libdecnumber: + @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stage2-libdecnumber/Makefile ] \ + || exit 0 ; \ + @[ `cat stage_current` = stage2 ] || $(MAKE) stage2-start + cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(FLAGS_TO_PASS) \ + $(POSTSTAGE1_FLAGS_TO_PASS) \ + clean +@endif libdecnumber-bootstrap + + +.PHONY: all-stage3-libdecnumber maybe-all-stage3-libdecnumber +.PHONY: clean-stage3-libdecnumber maybe-clean-stage3-libdecnumber +maybe-all-stage3-libdecnumber: +maybe-clean-stage3-libdecnumber: +@if libdecnumber-bootstrap +maybe-all-stage3-libdecnumber: all-stage3-libdecnumber +all-stage3: all-stage3-libdecnumber +TARGET-stage3-libdecnumber = $(TARGET-libdecnumber) +all-stage3-libdecnumber: configure-stage3-libdecnumber + @[ `cat stage_current` = stage3 ] || $(MAKE) stage3-start + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + $(POSTSTAGE1_HOST_EXPORTS) \ + cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(FLAGS_TO_PASS) $(POSTSTAGE1_FLAGS_TO_PASS) \ + $(TARGET-stage3-libdecnumber) + +maybe-clean-stage3-libdecnumber: clean-stage3-libdecnumber +clean-stage3: clean-stage3-libdecnumber +clean-stage3-libdecnumber: + @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stage3-libdecnumber/Makefile ] \ + || exit 0 ; \ + @[ `cat stage_current` = stage3 ] || $(MAKE) stage3-start + cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(FLAGS_TO_PASS) \ + $(POSTSTAGE1_FLAGS_TO_PASS) \ + clean +@endif libdecnumber-bootstrap + + +.PHONY: all-stage4-libdecnumber maybe-all-stage4-libdecnumber +.PHONY: clean-stage4-libdecnumber maybe-clean-stage4-libdecnumber +maybe-all-stage4-libdecnumber: +maybe-clean-stage4-libdecnumber: +@if libdecnumber-bootstrap +maybe-all-stage4-libdecnumber: all-stage4-libdecnumber +all-stage4: all-stage4-libdecnumber +TARGET-stage4-libdecnumber = $(TARGET-libdecnumber) +all-stage4-libdecnumber: configure-stage4-libdecnumber + @[ `cat stage_current` = stage4 ] || $(MAKE) stage4-start + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + $(POSTSTAGE1_HOST_EXPORTS) \ + cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(FLAGS_TO_PASS) $(POSTSTAGE1_FLAGS_TO_PASS) \ + $(TARGET-stage4-libdecnumber) + +maybe-clean-stage4-libdecnumber: clean-stage4-libdecnumber +clean-stage4: clean-stage4-libdecnumber +clean-stage4-libdecnumber: + @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stage4-libdecnumber/Makefile ] \ + || exit 0 ; \ + @[ `cat stage_current` = stage4 ] || $(MAKE) stage4-start + cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(FLAGS_TO_PASS) \ + $(POSTSTAGE1_FLAGS_TO_PASS) \ + clean +@endif libdecnumber-bootstrap + + +.PHONY: all-stageprofile-libdecnumber maybe-all-stageprofile-libdecnumber +.PHONY: clean-stageprofile-libdecnumber maybe-clean-stageprofile-libdecnumber +maybe-all-stageprofile-libdecnumber: +maybe-clean-stageprofile-libdecnumber: +@if libdecnumber-bootstrap +maybe-all-stageprofile-libdecnumber: all-stageprofile-libdecnumber +all-stageprofile: all-stageprofile-libdecnumber +TARGET-stageprofile-libdecnumber = $(TARGET-libdecnumber) +all-stageprofile-libdecnumber: configure-stageprofile-libdecnumber + @[ `cat stage_current` = stageprofile ] || $(MAKE) stageprofile-start + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + $(POSTSTAGE1_HOST_EXPORTS) \ + cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(FLAGS_TO_PASS) $(POSTSTAGE1_FLAGS_TO_PASS) CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" \ + $(TARGET-stageprofile-libdecnumber) + +maybe-clean-stageprofile-libdecnumber: clean-stageprofile-libdecnumber +clean-stageprofile: clean-stageprofile-libdecnumber +clean-stageprofile-libdecnumber: + @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stageprofile-libdecnumber/Makefile ] \ + || exit 0 ; \ + @[ `cat stage_current` = stageprofile ] || $(MAKE) stageprofile-start + cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(FLAGS_TO_PASS) \ + $(POSTSTAGE1_FLAGS_TO_PASS) \ + CFLAGS="$(BOOT_CFLAGS) -fprofile-generate" clean +@endif libdecnumber-bootstrap + + +.PHONY: all-stagefeedback-libdecnumber maybe-all-stagefeedback-libdecnumber +.PHONY: clean-stagefeedback-libdecnumber maybe-clean-stagefeedback-libdecnumber +maybe-all-stagefeedback-libdecnumber: +maybe-clean-stagefeedback-libdecnumber: +@if libdecnumber-bootstrap +maybe-all-stagefeedback-libdecnumber: all-stagefeedback-libdecnumber +all-stagefeedback: all-stagefeedback-libdecnumber +TARGET-stagefeedback-libdecnumber = $(TARGET-libdecnumber) +all-stagefeedback-libdecnumber: configure-stagefeedback-libdecnumber + @[ `cat stage_current` = stagefeedback ] || $(MAKE) stagefeedback-start + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + $(POSTSTAGE1_HOST_EXPORTS) \ + cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(FLAGS_TO_PASS) $(POSTSTAGE1_FLAGS_TO_PASS) CFLAGS="$(BOOT_CFLAGS) -fprofile-use" \ + $(TARGET-stagefeedback-libdecnumber) + +maybe-clean-stagefeedback-libdecnumber: clean-stagefeedback-libdecnumber +clean-stagefeedback: clean-stagefeedback-libdecnumber +clean-stagefeedback-libdecnumber: + @[ -f $(HOST_SUBDIR)/libdecnumber/Makefile ] || [ -f $(HOST_SUBDIR)/stagefeedback-libdecnumber/Makefile ] \ + || exit 0 ; \ + @[ `cat stage_current` = stagefeedback ] || $(MAKE) stagefeedback-start + cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(FLAGS_TO_PASS) \ + $(POSTSTAGE1_FLAGS_TO_PASS) \ + CFLAGS="$(BOOT_CFLAGS) -fprofile-use" clean +@endif libdecnumber-bootstrap + + + + + +.PHONY: check-libdecnumber maybe-check-libdecnumber +maybe-check-libdecnumber: +@if libdecnumber +maybe-check-libdecnumber: check-libdecnumber + +check-libdecnumber: + @$(unstage) + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + (cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(FLAGS_TO_PASS) check) + +@endif libdecnumber + +.PHONY: install-libdecnumber maybe-install-libdecnumber +maybe-install-libdecnumber: +@if libdecnumber +maybe-install-libdecnumber: install-libdecnumber + +install-libdecnumber: installdirs + @$(unstage) + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + (cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(FLAGS_TO_PASS) install) + +@endif libdecnumber + +# Other targets (info, dvi, etc.) + +.PHONY: maybe-info-libdecnumber info-libdecnumber +maybe-info-libdecnumber: +@if libdecnumber +maybe-info-libdecnumber: info-libdecnumber + +info-libdecnumber: \ + configure-libdecnumber + @[ -f ./libdecnumber/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + for flag in $(EXTRA_HOST_FLAGS) ; do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing info in libdecnumber" ; \ + (cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + info) \ + || exit 1 + +@endif libdecnumber + +.PHONY: maybe-dvi-libdecnumber dvi-libdecnumber +maybe-dvi-libdecnumber: +@if libdecnumber +maybe-dvi-libdecnumber: dvi-libdecnumber + +dvi-libdecnumber: \ + configure-libdecnumber + @[ -f ./libdecnumber/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + for flag in $(EXTRA_HOST_FLAGS) ; do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing dvi in libdecnumber" ; \ + (cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + dvi) \ + || exit 1 + +@endif libdecnumber + +.PHONY: maybe-html-libdecnumber html-libdecnumber +maybe-html-libdecnumber: +@if libdecnumber +maybe-html-libdecnumber: html-libdecnumber + +html-libdecnumber: \ + configure-libdecnumber + @[ -f ./libdecnumber/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + for flag in $(EXTRA_HOST_FLAGS) ; do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing html in libdecnumber" ; \ + (cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + html) \ + || exit 1 + +@endif libdecnumber + +.PHONY: maybe-TAGS-libdecnumber TAGS-libdecnumber +maybe-TAGS-libdecnumber: +@if libdecnumber +maybe-TAGS-libdecnumber: TAGS-libdecnumber + +TAGS-libdecnumber: \ + configure-libdecnumber + @[ -f ./libdecnumber/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + for flag in $(EXTRA_HOST_FLAGS) ; do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing TAGS in libdecnumber" ; \ + (cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + TAGS) \ + || exit 1 + +@endif libdecnumber + +.PHONY: maybe-install-info-libdecnumber install-info-libdecnumber +maybe-install-info-libdecnumber: +@if libdecnumber +maybe-install-info-libdecnumber: install-info-libdecnumber + +install-info-libdecnumber: \ + configure-libdecnumber \ + info-libdecnumber + @[ -f ./libdecnumber/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + for flag in $(EXTRA_HOST_FLAGS) ; do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing install-info in libdecnumber" ; \ + (cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + install-info) \ + || exit 1 + +@endif libdecnumber + +.PHONY: maybe-installcheck-libdecnumber installcheck-libdecnumber +maybe-installcheck-libdecnumber: +@if libdecnumber +maybe-installcheck-libdecnumber: installcheck-libdecnumber + +installcheck-libdecnumber: \ + configure-libdecnumber + @[ -f ./libdecnumber/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + for flag in $(EXTRA_HOST_FLAGS) ; do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing installcheck in libdecnumber" ; \ + (cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + installcheck) \ + || exit 1 + +@endif libdecnumber + +.PHONY: maybe-mostlyclean-libdecnumber mostlyclean-libdecnumber +maybe-mostlyclean-libdecnumber: +@if libdecnumber +maybe-mostlyclean-libdecnumber: mostlyclean-libdecnumber + +mostlyclean-libdecnumber: + @[ -f ./libdecnumber/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + for flag in $(EXTRA_HOST_FLAGS) ; do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing mostlyclean in libdecnumber" ; \ + (cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + mostlyclean) \ + || exit 1 + +@endif libdecnumber + +.PHONY: maybe-clean-libdecnumber clean-libdecnumber +maybe-clean-libdecnumber: +@if libdecnumber +maybe-clean-libdecnumber: clean-libdecnumber + +clean-libdecnumber: + @[ -f ./libdecnumber/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + for flag in $(EXTRA_HOST_FLAGS) ; do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing clean in libdecnumber" ; \ + (cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + clean) \ + || exit 1 + +@endif libdecnumber + +.PHONY: maybe-distclean-libdecnumber distclean-libdecnumber +maybe-distclean-libdecnumber: +@if libdecnumber +maybe-distclean-libdecnumber: distclean-libdecnumber + +distclean-libdecnumber: + @[ -f ./libdecnumber/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + for flag in $(EXTRA_HOST_FLAGS) ; do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing distclean in libdecnumber" ; \ + (cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + distclean) \ + || exit 1 + +@endif libdecnumber + +.PHONY: maybe-maintainer-clean-libdecnumber maintainer-clean-libdecnumber +maybe-maintainer-clean-libdecnumber: +@if libdecnumber +maybe-maintainer-clean-libdecnumber: maintainer-clean-libdecnumber + +maintainer-clean-libdecnumber: + @[ -f ./libdecnumber/Makefile ] || exit 0; \ + r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(HOST_EXPORTS) \ + for flag in $(EXTRA_HOST_FLAGS) ; do \ + eval `echo "$$flag" | sed -e "s|^\([^=]*\)=\(.*\)|\1='\2'; export \1|"`; \ + done; \ + echo "Doing maintainer-clean in libdecnumber" ; \ + (cd $(HOST_SUBDIR)/libdecnumber && \ + $(MAKE) $(BASE_FLAGS_TO_PASS) "AR=$${AR}" "AS=$${AS}" \ + "CC=$${CC}" "CXX=$${CXX}" "LD=$${LD}" "NM=$${NM}" \ + "RANLIB=$${RANLIB}" \ + "DLLTOOL=$${DLLTOOL}" "WINDRES=$${WINDRES}" \ + maintainer-clean) \ + || exit 1 + +@endif libdecnumber + + + .PHONY: configure-libgui maybe-configure-libgui maybe-configure-libgui: @if libgui @@ -35115,7 +35543,7 @@ stage = : @if gcc-bootstrap unstage = [ -f stage_current ] || $(MAKE) `cat stage_last`-start -stage = $(MAKE) `cat stage_current`-end +stage = [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : @endif gcc-bootstrap .PHONY: unstage stage @@ -35170,7 +35598,7 @@ POSTSTAGE1_FLAGS_TO_PASS = \ .PHONY: stage1-start stage1-end stage1-start:: - @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \ + @$(stage); \ echo stage1 > stage_current ; \ echo stage1 > stage_last; \ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR) @@ -35222,6 +35650,12 @@ stage1-start:: set stage1-libcpp libcpp ; \ @CREATE_LINK_TO_DIR@ @endif libcpp +@if libdecnumber + @cd $(HOST_SUBDIR); [ -d stage1-libdecnumber ] || \ + mkdir stage1-libdecnumber; \ + set stage1-libdecnumber libdecnumber ; \ + @CREATE_LINK_TO_DIR@ +@endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); [ -d stage1-libiberty ] || \ mkdir stage1-libiberty; \ @@ -35269,6 +35703,10 @@ stage1-end:: @cd $(HOST_SUBDIR); set libcpp stage1-libcpp ; \ @UNDO_LINK_TO_DIR@ @endif libcpp +@if libdecnumber + @cd $(HOST_SUBDIR); set libdecnumber stage1-libdecnumber ; \ + @UNDO_LINK_TO_DIR@ +@endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); set libiberty stage1-libiberty ; \ @UNDO_LINK_TO_DIR@ @@ -35306,7 +35744,7 @@ do-clean: clean-stage1 .PHONY: distclean-stage1 distclean-stage1:: - [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : + @$(stage) rm -rf stage1-* @@ -35316,7 +35754,7 @@ distclean-stage1:: .PHONY: stage2-start stage2-end stage2-start:: - @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \ + @$(stage); \ echo stage2 > stage_current ; \ echo stage2 > stage_last; \ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR) @@ -35384,6 +35822,14 @@ stage2-start:: set stage1-libcpp prev-libcpp ; \ @CREATE_LINK_TO_DIR@ @endif libcpp +@if libdecnumber + @cd $(HOST_SUBDIR); [ -d stage2-libdecnumber ] || \ + mkdir stage2-libdecnumber; \ + set stage2-libdecnumber libdecnumber ; \ + @CREATE_LINK_TO_DIR@ ; \ + set stage1-libdecnumber prev-libdecnumber ; \ + @CREATE_LINK_TO_DIR@ +@endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); [ -d stage2-libiberty ] || \ mkdir stage2-libiberty; \ @@ -35451,6 +35897,12 @@ stage2-end:: set prev-libcpp stage1-libcpp ; \ @UNDO_LINK_TO_DIR@ @endif libcpp +@if libdecnumber + @cd $(HOST_SUBDIR); set libdecnumber stage2-libdecnumber ; \ + @UNDO_LINK_TO_DIR@ ; \ + set prev-libdecnumber stage1-libdecnumber ; \ + @UNDO_LINK_TO_DIR@ +@endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); set libiberty stage2-libiberty ; \ @UNDO_LINK_TO_DIR@ ; \ @@ -35488,15 +35940,23 @@ do-clean: clean-stage2 .PHONY: bootstrap2 -bootstrap2: stage2-bubble - $(MAKE) $(RECURSE_FLAGS_TO_PASS) all +bootstrap2: + echo stage2 > stage_final + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage2-bubble + @$(unstage) + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target + @$(stage) # Rules to wipe a stage and all the following ones, also used for cleanstrap distclean-stage1:: distclean-stage2 .PHONY: distclean-stage2 distclean-stage2:: - [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : + @$(stage) rm -rf stage2-* @@ -35506,7 +35966,7 @@ distclean-stage2:: .PHONY: stage3-start stage3-end stage3-start:: - @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \ + @$(stage); \ echo stage3 > stage_current ; \ echo stage3 > stage_last; \ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR) @@ -35574,6 +36034,14 @@ stage3-start:: set stage2-libcpp prev-libcpp ; \ @CREATE_LINK_TO_DIR@ @endif libcpp +@if libdecnumber + @cd $(HOST_SUBDIR); [ -d stage3-libdecnumber ] || \ + mkdir stage3-libdecnumber; \ + set stage3-libdecnumber libdecnumber ; \ + @CREATE_LINK_TO_DIR@ ; \ + set stage2-libdecnumber prev-libdecnumber ; \ + @CREATE_LINK_TO_DIR@ +@endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); [ -d stage3-libiberty ] || \ mkdir stage3-libiberty; \ @@ -35641,6 +36109,12 @@ stage3-end:: set prev-libcpp stage2-libcpp ; \ @UNDO_LINK_TO_DIR@ @endif libcpp +@if libdecnumber + @cd $(HOST_SUBDIR); set libdecnumber stage3-libdecnumber ; \ + @UNDO_LINK_TO_DIR@ ; \ + set prev-libdecnumber stage2-libdecnumber ; \ + @UNDO_LINK_TO_DIR@ +@endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); set libiberty stage3-libiberty ; \ @UNDO_LINK_TO_DIR@ ; \ @@ -35668,6 +36142,7 @@ stage3-bubble:: stage2-bubble $(MAKE) stage3-start; \ $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage3; \ fi + $(MAKE) compare .PHONY: all-stage3 clean-stage3 do-clean: clean-stage3 @@ -35683,7 +36158,7 @@ compare: echo Cannot compare object files as stage 2 was deleted. ; \ exit 0 ; \ fi; \ - [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \ + $(stage); \ rm -f .bad_compare ; \ cd stage3-gcc; \ files=`find . -name "*$(objext)" -print` ; \ @@ -35713,16 +36188,23 @@ compare: .PHONY: bootstrap -bootstrap: stage3-bubble - $(MAKE) compare - $(MAKE) $(RECURSE_FLAGS_TO_PASS) all +bootstrap: + echo stage3 > stage_final + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage3-bubble + @$(unstage) + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target + @$(stage) # Rules to wipe a stage and all the following ones, also used for cleanstrap distclean-stage2:: distclean-stage3 .PHONY: distclean-stage3 distclean-stage3:: - [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : + @$(stage) rm -rf stage3-* compare @@ -35735,7 +36217,7 @@ cleanstrap: distclean bootstrap .PHONY: stage4-start stage4-end stage4-start:: - @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \ + @$(stage); \ echo stage4 > stage_current ; \ echo stage4 > stage_last; \ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR) @@ -35803,6 +36285,14 @@ stage4-start:: set stage3-libcpp prev-libcpp ; \ @CREATE_LINK_TO_DIR@ @endif libcpp +@if libdecnumber + @cd $(HOST_SUBDIR); [ -d stage4-libdecnumber ] || \ + mkdir stage4-libdecnumber; \ + set stage4-libdecnumber libdecnumber ; \ + @CREATE_LINK_TO_DIR@ ; \ + set stage3-libdecnumber prev-libdecnumber ; \ + @CREATE_LINK_TO_DIR@ +@endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); [ -d stage4-libiberty ] || \ mkdir stage4-libiberty; \ @@ -35870,6 +36360,12 @@ stage4-end:: set prev-libcpp stage3-libcpp ; \ @UNDO_LINK_TO_DIR@ @endif libcpp +@if libdecnumber + @cd $(HOST_SUBDIR); set libdecnumber stage4-libdecnumber ; \ + @UNDO_LINK_TO_DIR@ ; \ + set prev-libdecnumber stage3-libdecnumber ; \ + @UNDO_LINK_TO_DIR@ +@endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); set libiberty stage4-libiberty ; \ @UNDO_LINK_TO_DIR@ ; \ @@ -35897,6 +36393,7 @@ stage4-bubble:: stage3-bubble $(MAKE) stage4-start; \ $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage4; \ fi + $(MAKE) compare3 .PHONY: all-stage4 clean-stage4 do-clean: clean-stage4 @@ -35912,7 +36409,7 @@ compare3: echo Cannot compare object files as stage 3 was deleted. ; \ exit 0 ; \ fi; \ - [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \ + $(stage); \ rm -f .bad_compare ; \ cd stage4-gcc; \ files=`find . -name "*$(objext)" -print` ; \ @@ -35942,16 +36439,23 @@ compare3: .PHONY: bootstrap4 -bootstrap4: stage4-bubble - $(MAKE) compare3 - $(MAKE) $(RECURSE_FLAGS_TO_PASS) all +bootstrap4: + echo stage4 > stage_final + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage4-bubble + @$(unstage) + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target + @$(stage) # Rules to wipe a stage and all the following ones, also used for cleanstrap distclean-stage3:: distclean-stage4 .PHONY: distclean-stage4 distclean-stage4:: - [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : + @$(stage) rm -rf stage4-* compare3 @@ -35961,7 +36465,7 @@ distclean-stage4:: .PHONY: stageprofile-start stageprofile-end stageprofile-start:: - @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \ + @$(stage); \ echo stageprofile > stage_current ; \ echo stageprofile > stage_last; \ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR) @@ -36029,6 +36533,14 @@ stageprofile-start:: set stage1-libcpp prev-libcpp ; \ @CREATE_LINK_TO_DIR@ @endif libcpp +@if libdecnumber + @cd $(HOST_SUBDIR); [ -d stageprofile-libdecnumber ] || \ + mkdir stageprofile-libdecnumber; \ + set stageprofile-libdecnumber libdecnumber ; \ + @CREATE_LINK_TO_DIR@ ; \ + set stage1-libdecnumber prev-libdecnumber ; \ + @CREATE_LINK_TO_DIR@ +@endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); [ -d stageprofile-libiberty ] || \ mkdir stageprofile-libiberty; \ @@ -36096,6 +36608,12 @@ stageprofile-end:: set prev-libcpp stage1-libcpp ; \ @UNDO_LINK_TO_DIR@ @endif libcpp +@if libdecnumber + @cd $(HOST_SUBDIR); set libdecnumber stageprofile-libdecnumber ; \ + @UNDO_LINK_TO_DIR@ ; \ + set prev-libdecnumber stage1-libdecnumber ; \ + @UNDO_LINK_TO_DIR@ +@endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); set libiberty stageprofile-libiberty ; \ @UNDO_LINK_TO_DIR@ ; \ @@ -36137,7 +36655,7 @@ do-clean: clean-stageprofile distclean-stage1:: distclean-stageprofile .PHONY: distclean-stageprofile distclean-stageprofile:: - [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : + @$(stage) rm -rf stageprofile-* @@ -36147,7 +36665,7 @@ distclean-stageprofile:: .PHONY: stagefeedback-start stagefeedback-end stagefeedback-start:: - @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \ + @$(stage); \ echo stagefeedback > stage_current ; \ echo stagefeedback > stage_last; \ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR) @@ -36215,6 +36733,14 @@ stagefeedback-start:: set stageprofile-libcpp prev-libcpp ; \ @CREATE_LINK_TO_DIR@ @endif libcpp +@if libdecnumber + @cd $(HOST_SUBDIR); [ -d stagefeedback-libdecnumber ] || \ + mkdir stagefeedback-libdecnumber; \ + set stagefeedback-libdecnumber libdecnumber ; \ + @CREATE_LINK_TO_DIR@ ; \ + set stageprofile-libdecnumber prev-libdecnumber ; \ + @CREATE_LINK_TO_DIR@ +@endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); [ -d stagefeedback-libiberty ] || \ mkdir stagefeedback-libiberty; \ @@ -36282,6 +36808,12 @@ stagefeedback-end:: set prev-libcpp stageprofile-libcpp ; \ @UNDO_LINK_TO_DIR@ @endif libcpp +@if libdecnumber + @cd $(HOST_SUBDIR); set libdecnumber stagefeedback-libdecnumber ; \ + @UNDO_LINK_TO_DIR@ ; \ + set prev-libdecnumber stageprofile-libdecnumber ; \ + @UNDO_LINK_TO_DIR@ +@endif libdecnumber @if libiberty @cd $(HOST_SUBDIR); set libiberty stagefeedback-libiberty ; \ @UNDO_LINK_TO_DIR@ ; \ @@ -36319,15 +36851,23 @@ do-clean: clean-stagefeedback .PHONY: profiledbootstrap -profiledbootstrap: stagefeedback-bubble - $(MAKE) $(RECURSE_FLAGS_TO_PASS) all +profiledbootstrap: + echo stagefeedback > stage_final + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(RECURSE_FLAGS_TO_PASS) stagefeedback-bubble + @$(unstage) + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target + @$(stage) # Rules to wipe a stage and all the following ones, also used for cleanstrap distclean-stageprofile:: distclean-stagefeedback .PHONY: distclean-stagefeedback distclean-stagefeedback:: - [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : + @$(stage) rm -rf stagefeedback-* @@ -36577,6 +37117,14 @@ all-stage3-gcc: all-stage3-libcpp all-stage4-gcc: all-stage4-libcpp all-stageprofile-gcc: all-stageprofile-libcpp all-stagefeedback-gcc: all-stagefeedback-libcpp +all-gcc: all-libdecnumber + +all-stage1-gcc: all-stage1-libdecnumber +all-stage2-gcc: all-stage2-libdecnumber +all-stage3-gcc: all-stage3-libdecnumber +all-stage4-gcc: all-stage4-libdecnumber +all-stageprofile-gcc: all-stageprofile-libdecnumber +all-stagefeedback-gcc: all-stagefeedback-libdecnumber all-gcc: maybe-all-libiberty all-stage1-gcc: maybe-all-stage1-libiberty @@ -36923,6 +37471,7 @@ all-prebootstrap: maybe-all-gas all-prebootstrap: maybe-all-intl all-prebootstrap: maybe-all-ld all-prebootstrap: maybe-all-libcpp +all-prebootstrap: maybe-all-libdecnumber all-prebootstrap: maybe-all-libiberty all-prebootstrap: maybe-all-zlib @endif gcc-no-bootstrap diff --git a/Makefile.tpl b/Makefile.tpl index c99ba5b5494..b85f919872e 100644 --- a/Makefile.tpl +++ b/Makefile.tpl @@ -136,7 +136,8 @@ HOST_CONFIGARGS = @host_configargs@ # with srcdir=.. HOST_SUBDIR = @host_subdir@ # This is the list of variables to export in the environment when -# configuring subdirectories for the host system. +# configuring subdirectories for the host system. We need to pass +# some to the GCC configure because of its hybrid host/target nature. HOST_EXPORTS = \ $(BASE_EXPORTS) \ CC="$(CC)"; export CC; \ @@ -155,6 +156,13 @@ HOST_EXPORTS = \ WINDRES="$(WINDRES)"; export WINDRES; \ OBJCOPY="$(OBJCOPY)"; export OBJCOPY; \ OBJDUMP="$(OBJDUMP)"; export OBJDUMP; \ + AR_FOR_TARGET="$(AR_FOR_TARGET)"; export AR_FOR_TARGET; \ + AS_FOR_TARGET="$(AS_FOR_TARGET)"; export AS_FOR_TARGET; \ + GCC_FOR_TARGET="$(GCC_FOR_TARGET)"; export GCC_FOR_TARGET; \ + LD_FOR_TARGET="$(LD_FOR_TARGET)"; export LD_FOR_TARGET; \ + NM_FOR_TARGET="$(NM_FOR_TARGET)"; export NM_FOR_TARGET; \ + OBJDUMP_FOR_TARGET="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP_FOR_TARGET; \ + RANLIB_FOR_TARGET="$(RANLIB_FOR_TARGET)"; export RANLIB_FOR_TARGET; \ TOPLEVEL_CONFIGURE_ARGUMENTS="$(TOPLEVEL_CONFIGURE_ARGUMENTS)"; export TOPLEVEL_CONFIGURE_ARGUMENTS; \ GMPLIBS="$(HOST_GMPLIBS)"; export GMPLIBS; \ GMPINC="$(HOST_GMPINC)"; export GMPINC; \ @@ -186,7 +194,7 @@ TARGET_CONFIGARGS = @target_configargs@ --with-target-subdir="$(TARGET_SUBDIR)" BASE_TARGET_EXPORTS = \ $(BASE_EXPORTS) \ AR="$(AR_FOR_TARGET)"; export AR; \ - AS="$(AS_FOR_TARGET)"; export AS; \ + AS="$(COMPILER_AS_FOR_TARGET)"; export AS; \ CC="$(CC_FOR_TARGET)"; export CC; \ CFLAGS="$(CFLAGS_FOR_TARGET)"; export CFLAGS; \ CONFIG_SHELL="$(SHELL)"; export CONFIG_SHELL; \ @@ -195,10 +203,10 @@ BASE_TARGET_EXPORTS = \ GCJ="$(GCJ_FOR_TARGET)"; export GCJ; \ GFORTRAN="$(GFORTRAN_FOR_TARGET)"; export GFORTRAN; \ DLLTOOL="$(DLLTOOL_FOR_TARGET)"; export DLLTOOL; \ - LD="$(LD_FOR_TARGET)"; export LD; \ + LD="$(COMPILER_LD_FOR_TARGET)"; export LD; \ LDFLAGS="$(LDFLAGS_FOR_TARGET)"; export LDFLAGS; \ LIPO="$(LIPO_FOR_TARGET)"; export LIPO; \ - NM="$(NM_FOR_TARGET)"; export NM; \ + NM="$(COMPILER_NM_FOR_TARGET)"; export NM; \ OBJDUMP="$(OBJDUMP_FOR_TARGET)"; export OBJDUMP; \ RANLIB="$(RANLIB_FOR_TARGET)"; export RANLIB; \ STRIP="$(STRIP_FOR_TARGET)"; export STRIP; \ @@ -248,47 +256,14 @@ BUILD_PREFIX_1 = @BUILD_PREFIX_1@ # here so that they can be overridden by Makefile fragments. BOOT_CFLAGS= -g -O2 -CONFIGURED_BISON = @CONFIGURED_BISON@ -BISON = `if [ -f $$r/$(BUILD_SUBDIR)/bison/tests/bison ] ; then \ - echo $$r/$(BUILD_SUBDIR)/bison/tests/bison ; \ - else \ - echo ${CONFIGURED_BISON} ; \ - fi` - -CONFIGURED_YACC = @CONFIGURED_YACC@ -YACC = `if [ -f $$r/$(BUILD_SUBDIR)/bison/tests/bison ] ; then \ - echo $$r/$(BUILD_SUBDIR)/bison/tests/bison -y ; \ - elif [ -f $$r/$(BUILD_SUBDIR)/byacc/byacc ] ; then \ - echo $$r/$(BUILD_SUBDIR)/byacc/byacc ; \ - else \ - echo ${CONFIGURED_YACC} ; \ - fi` - -CONFIGURED_FLEX = @CONFIGURED_FLEX@ -FLEX = `if [ -f $$r/$(BUILD_SUBDIR)/flex/flex ] ; \ - then echo $$r/$(BUILD_SUBDIR)/flex/flex ; \ - else echo ${CONFIGURED_FLEX} ; fi` - -CONFIGURED_LEX = @CONFIGURED_LEX@ -LEX = `if [ -f $$r/$(BUILD_SUBDIR)/flex/flex ] ; \ - then echo $$r/$(BUILD_SUBDIR)/flex/flex ; \ - else echo ${CONFIGURED_LEX} ; fi` - -CONFIGURED_M4 = @CONFIGURED_M4@ -M4 = `if [ -f $$r/$(BUILD_SUBDIR)/m4/m4 ] ; \ - then echo $$r/$(BUILD_SUBDIR)/m4/m4 ; \ - else echo ${CONFIGURED_M4} ; fi` - -# For an installed makeinfo, we require it to be from texinfo 4.2 or -# higher, else we use the "missing" dummy. We also pass the subdirectory -# makeinfo even if only the Makefile is there, because Texinfo builds its -# manual when made, and it requires its own version. -CONFIGURED_MAKEINFO = @CONFIGURED_MAKEINFO@ -MAKEINFO = `if [ -f $$r/$(BUILD_SUBDIR)/texinfo/makeinfo/Makefile ] ; \ - then echo $$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo ; \ - else if (${CONFIGURED_MAKEINFO} --version \ - | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])') >/dev/null 2>&1; \ - then echo ${CONFIGURED_MAKEINFO}; else echo $$s/missing makeinfo; fi; fi` +BISON = @BISON@ +YACC = @YACC@ +FLEX = @FLEX@ +LEX = @LEX@ +M4 = @M4@ +MAKEINFO = @MAKEINFO@ +EXPECT = @EXPECT@ +RUNTEST = @RUNTEST@ # This just becomes part of the MAKEINFO definition passed down to # sub-makes. It lets flags be given on the command line while still @@ -296,43 +271,28 @@ MAKEINFO = `if [ -f $$r/$(BUILD_SUBDIR)/texinfo/makeinfo/Makefile ] ; \ # (Default to avoid splitting info files by setting the threshold high.) MAKEINFOFLAGS = --split-size=5000000 -# FIXME: expect may become a build tool? -EXPECT = `if [ -f $$r/$(HOST_SUBDIR)/expect/expect ] ; \ - then echo $$r/$(HOST_SUBDIR)/expect/expect ; \ - else echo expect ; fi` - -RUNTEST = `if [ -f $$s/dejagnu/runtest ] ; \ - then echo $$s/dejagnu/runtest ; \ - else echo runtest ; fi` - # --------------------------------------------- # Programs producing files for the HOST machine # --------------------------------------------- AS = @AS@ - AR = @AR@ AR_FLAGS = rc - CC = @CC@ -CFLAGS = @CFLAGS@ -LIBCFLAGS = $(CFLAGS) - CXX = @CXX@ -CXXFLAGS = @CXXFLAGS@ -LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates - DLLTOOL = @DLLTOOL@ - -NM = @NM@ - LD = @LD@ -LDFLAGS = - +LIPO = @LIPO@ +NM = @NM@ RANLIB = @RANLIB@ - +STRIP = @STRIP@ WINDRES = @WINDRES@ +CFLAGS = @CFLAGS@ +LDFLAGS = +LIBCFLAGS = $(CFLAGS) +CXXFLAGS = @CXXFLAGS@ +LIBCXXFLAGS = $(CXXFLAGS) -fno-implicit-templates PICFLAG = # ----------------------------------------------- @@ -342,242 +302,42 @@ PICFLAG = FLAGS_FOR_TARGET = @FLAGS_FOR_TARGET@ AR_FOR_TARGET=@AR_FOR_TARGET@ -CONFIGURED_AR_FOR_TARGET=@CONFIGURED_AR_FOR_TARGET@ -USUAL_AR_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/binutils/ar ] ; then \ - echo $$r/$(HOST_SUBDIR)/binutils/ar ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(AR); \ - else \ - echo $(CONFIGURED_AR_FOR_TARGET) ; \ - fi; \ - fi` - AS_FOR_TARGET=@AS_FOR_TARGET@ -CONFIGURED_AS_FOR_TARGET=@CONFIGURED_AS_FOR_TARGET@ -USUAL_AS_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/gas/as-new ] ; then \ - echo $$r/$(HOST_SUBDIR)/gas/as-new ; \ - elif [ -f $$r/$(HOST_SUBDIR)/gcc/as ]; then \ - echo $$r/$(HOST_SUBDIR)/gcc/as ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(AS); \ - else \ - echo $(CONFIGURED_AS_FOR_TARGET) ; \ - fi; \ - fi` - CC_FOR_TARGET=$(STAGE_CC_WRAPPER) @CC_FOR_TARGET@ $(FLAGS_FOR_TARGET) -CONFIGURED_CC_FOR_TARGET=@CONFIGURED_CC_FOR_TARGET@ -USUAL_CC_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/gcc/xgcc ] ; then \ - echo $$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/ ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(CC); \ - else \ - echo $(CONFIGURED_CC_FOR_TARGET) ; \ - fi; \ - fi` - -# During gcc bootstrap, if we use some random cc for stage1 then -# CFLAGS will be just -g. We want to ensure that TARGET libraries -# (which we know are built with gcc) are built with optimizations so -# prepend -O2 when setting CFLAGS_FOR_TARGET. -CFLAGS_FOR_TARGET = -O2 $(CFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET) -SYSROOT_CFLAGS_FOR_TARGET = @SYSROOT_CFLAGS_FOR_TARGET@ # If GCC_FOR_TARGET is not overriden on the command line, then this # variable is passed down to the gcc Makefile, where it is used to # build libgcc2.a. We define it here so that it can itself be # overridden on the command line. -GCC_FOR_TARGET=@GCC_FOR_TARGET@ -CONFIGURED_GCC_FOR_TARGET=@CONFIGURED_GCC_FOR_TARGET@ -USUAL_GCC_FOR_TARGET = $(STAGE_CC_WRAPPER) \ - $$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/ $(FLAGS_FOR_TARGET) -LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET) - +GCC_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCC_FOR_TARGET@ $(FLAGS_FOR_TARGET) CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @CXX_FOR_TARGET@ $(FLAGS_FOR_TARGET) -CONFIGURED_CXX_FOR_TARGET=@CONFIGURED_CXX_FOR_TARGET@ -USUAL_CXX_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/gcc/g++ ] ; then \ - (echo $$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++; \ - test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes; \ - echo -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs) | tr '\015\012' ' '; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(CXX); \ - else \ - echo $(CONFIGURED_CXX_FOR_TARGET) ; \ - fi; \ - fi` - RAW_CXX_FOR_TARGET=$(STAGE_CC_WRAPPER) @RAW_CXX_FOR_TARGET@ $(FLAGS_FOR_TARGET) -USUAL_RAW_CXX_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/gcc/xgcc ] ; then \ - echo $$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(CXX); \ - else \ - echo $(CONFIGURED_CXX_FOR_TARGET) ; \ - fi; \ - fi` - -CXXFLAGS_FOR_TARGET = $(CXXFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET) -LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates - GCJ_FOR_TARGET=$(STAGE_CC_WRAPPER) @GCJ_FOR_TARGET@ $(FLAGS_FOR_TARGET) -CONFIGURED_GCJ_FOR_TARGET=@CONFIGURED_GCJ_FOR_TARGET@ -USUAL_GCJ_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/gcc/gcj ] ; then \ - echo $$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(GCJ); \ - else \ - echo $(CONFIGURED_GCJ_FOR_TARGET) ; \ - fi; \ - fi` - GFORTRAN_FOR_TARGET=$(STAGE_CC_WRAPPER) @GFORTRAN_FOR_TARGET@ $(FLAGS_FOR_TARGET) -CONFIGURED_GFORTRAN_FOR_TARGET=@CONFIGURED_GFORTRAN_FOR_TARGET@ -USUAL_GFORTRAN_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/gcc/gfortran ] ; then \ - echo $$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(GFORTRAN); \ - else \ - echo $(CONFIGURED_GFORTRAN_FOR_TARGET) ; \ - fi; \ - fi` - - DLLTOOL_FOR_TARGET=@DLLTOOL_FOR_TARGET@ -CONFIGURED_DLLTOOL_FOR_TARGET=@CONFIGURED_DLLTOOL_FOR_TARGET@ -USUAL_DLLTOOL_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/binutils/dlltool ] ; then \ - echo $$r/$(HOST_SUBDIR)/binutils/dlltool ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(DLLTOOL); \ - else \ - echo $(CONFIGURED_DLLTOOL_FOR_TARGET) ; \ - fi; \ - fi` - LD_FOR_TARGET=@LD_FOR_TARGET@ -CONFIGURED_LD_FOR_TARGET=@CONFIGURED_LD_FOR_TARGET@ -USUAL_LD_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/ld/ld-new ] ; then \ - echo $$r/$(HOST_SUBDIR)/ld/ld-new ; \ - elif [ -f $$r/$(HOST_SUBDIR)/gcc/collect-ld ]; then \ - echo $$r/$(HOST_SUBDIR)/gcc/collect-ld ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(LD); \ - else \ - echo $(CONFIGURED_LD_FOR_TARGET) ; \ - fi; \ - fi` - -LDFLAGS_FOR_TARGET = LIPO_FOR_TARGET=@LIPO_FOR_TARGET@ -CONFIGURED_LIPO_FOR_TARGET=@CONFIGURED_LIPO_FOR_TARGET@ -USUAL_LIPO_FOR_TARGET = ` \ - if [ '$(host)' = '$(target)' ] ; then \ - if [ x'$(LIPO)' != x ]; then \ - echo $(LIPO); \ - else \ - echo lipo; \ - fi; \ - else \ - echo $(CONFIGURED_LIPO_FOR_TARGET) ; \ - fi` - NM_FOR_TARGET=@NM_FOR_TARGET@ -CONFIGURED_NM_FOR_TARGET=@CONFIGURED_NM_FOR_TARGET@ -USUAL_NM_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/binutils/nm-new ] ; then \ - echo $$r/$(HOST_SUBDIR)/binutils/nm-new ; \ - elif [ -f $$r/$(HOST_SUBDIR)/gcc/nm ]; then \ - echo $$r/$(HOST_SUBDIR)/gcc/nm ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(NM); \ - else \ - echo $(CONFIGURED_NM_FOR_TARGET) ; \ - fi; \ - fi` - OBJDUMP_FOR_TARGET=@OBJDUMP_FOR_TARGET@ -CONFIGURED_OBJDUMP_FOR_TARGET=@CONFIGURED_OBJDUMP_FOR_TARGET@ -USUAL_OBJDUMP_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/binutils/objdump ] ; then \ - echo $$r/$(HOST_SUBDIR)/binutils/objdump ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - if [ x'$(OBJDUMP)' != x ]; then \ - echo $(OBJDUMP); \ - else \ - echo objdump; \ - fi; \ - else \ - echo $(CONFIGURED_OBJDUMP_FOR_TARGET) ; \ - fi; \ - fi` - RANLIB_FOR_TARGET=@RANLIB_FOR_TARGET@ -CONFIGURED_RANLIB_FOR_TARGET=@CONFIGURED_RANLIB_FOR_TARGET@ -USUAL_RANLIB_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/binutils/ranlib ] ; then \ - echo $$r/$(HOST_SUBDIR)/binutils/ranlib ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - if [ x'$(RANLIB)' != x ]; then \ - echo $(RANLIB); \ - else \ - echo ranlib; \ - fi; \ - else \ - echo $(CONFIGURED_RANLIB_FOR_TARGET) ; \ - fi; \ - fi` - STRIP_FOR_TARGET=@STRIP_FOR_TARGET@ -CONFIGURED_STRIP_FOR_TARGET=@CONFIGURED_STRIP_FOR_TARGET@ -USUAL_STRIP_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/binutils/strip ] ; then \ - echo $$r/$(HOST_SUBDIR)/binutils/strip ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - if [ x'$(STRIP)' != x ]; then \ - echo $(STRIP); \ - else \ - echo strip; \ - fi; \ - else \ - echo $(CONFIGURED_STRIP_FOR_TARGET) ; \ - fi; \ - fi` - WINDRES_FOR_TARGET=@WINDRES_FOR_TARGET@ -CONFIGURED_WINDRES_FOR_TARGET=@CONFIGURED_WINDRES_FOR_TARGET@ -USUAL_WINDRES_FOR_TARGET = ` \ - if [ -f $$r/$(HOST_SUBDIR)/binutils/windres ] ; then \ - echo $$r/$(HOST_SUBDIR)/binutils/windres ; \ - else \ - if [ '$(host)' = '$(target)' ] ; then \ - echo $(WINDRES); \ - else \ - echo $(CONFIGURED_WINDRES_FOR_TARGET) ; \ - fi; \ - fi` +COMPILER_AS_FOR_TARGET=@COMPILER_AS_FOR_TARGET@ +COMPILER_LD_FOR_TARGET=@COMPILER_LD_FOR_TARGET@ +COMPILER_NM_FOR_TARGET=@COMPILER_NM_FOR_TARGET@ + +# During gcc bootstrap, if we use some random cc for stage1 then +# CFLAGS will be just -g. We want to ensure that TARGET libraries +# (which we know are built with gcc) are built with optimizations so +# prepend -O2 when setting CFLAGS_FOR_TARGET. +CFLAGS_FOR_TARGET = -O2 $(CFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET) +SYSROOT_CFLAGS_FOR_TARGET = @SYSROOT_CFLAGS_FOR_TARGET@ +CXXFLAGS_FOR_TARGET = $(CXXFLAGS) $(SYSROOT_CFLAGS_FOR_TARGET) +LIBCFLAGS_FOR_TARGET = $(CFLAGS_FOR_TARGET) +LIBCXXFLAGS_FOR_TARGET = $(CXXFLAGS_FOR_TARGET) -fno-implicit-templates +LDFLAGS_FOR_TARGET = PICFLAG_FOR_TARGET = # ------------------------------------ @@ -644,8 +404,10 @@ EXTRA_HOST_FLAGS = \ 'CXX=$(CXX)' \ 'DLLTOOL=$(DLLTOOL)' \ 'LD=$(LD)' \ + 'LIPO=$(LIPO)' \ 'NM=$(NM)' \ 'RANLIB=$(RANLIB)' \ + 'STRIP=$(STRIP)' \ 'WINDRES=$(WINDRES)' FLAGS_TO_PASS = $(BASE_FLAGS_TO_PASS) $(EXTRA_HOST_FLAGS) @@ -667,17 +429,17 @@ X11_FLAGS_TO_PASS = \ # are set in BASE_FLAGS_TO_PASS, and the sub-make will expand them. EXTRA_TARGET_FLAGS = \ 'AR=$$(AR_FOR_TARGET)' \ - 'AS=$$(AS_FOR_TARGET)' \ + 'AS=$$(COMPILER_AS_FOR_TARGET)' \ 'CC=$$(CC_FOR_TARGET)' \ 'CFLAGS=$$(CFLAGS_FOR_TARGET)' \ 'CXX=$$(CXX_FOR_TARGET)' \ 'CXXFLAGS=$$(CXXFLAGS_FOR_TARGET)' \ 'DLLTOOL=$$(DLLTOOL_FOR_TARGET)' \ - 'LD=$$(LD_FOR_TARGET)' \ + 'LD=$$(COMPILER_LD_FOR_TARGET)' \ 'LDFLAGS=$$(LDFLAGS_FOR_TARGET)' \ 'LIBCFLAGS=$$(LIBCFLAGS_FOR_TARGET)' \ 'LIBCXXFLAGS=$$(LIBCXXFLAGS_FOR_TARGET)' \ - 'NM=$$(NM_FOR_TARGET)' \ + 'NM=$$(COMPILER_NM_FOR_TARGET)' \ 'OBJDUMP=$$(OBJDUMP_FOR_TARGET)' \ 'RANLIB=$$(RANLIB_FOR_TARGET)' \ 'WINDRES=$$(WINDRES_FOR_TARGET)' @@ -721,28 +483,19 @@ configure-target: [+ .PHONY: all all: @if gcc-bootstrap + [ -f stage_final ] || echo stage3 > stage_final @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - if [ ! -f stage_last ]; then \ - $(MAKE) $(RECURSE_FLAGS_TO_PASS) bootstrap; \ - fi + $(MAKE) $(RECURSE_FLAGS_TO_PASS) `cat stage_final`-bubble; \ @endif gcc-bootstrap @$(unstage) -@if gcc-no-bootstrap - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-prebootstrap -@endif gcc-no-bootstrap @r=`${PWD_COMMAND}`; export r; \ s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ if [ -f stage_last ]; then \ - $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target; \ else \ - $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-host; \ + $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-host all-target; \ fi - @r=`${PWD_COMMAND}`; export r; \ - s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ - $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-target @$(stage) .PHONY: all-build @@ -839,14 +592,10 @@ maintainer-clean: local-maintainer-clean do-maintainer-clean local-clean maintainer-clean: local-distclean realclean: maintainer-clean -# Extra dependency for clean-target, owing to the mixed nature of gcc +# Extra dependency for clean-target, owing to the mixed nature of gcc. clean-target: clean-target-libgcc clean-target-libgcc: - test ! -d gcc/libgcc || \ - (cd gcc/libgcc && find . -type d -print) | \ - while read d; do rm -f gcc/$$d/libgcc.a || : ; done - -rm -rf gcc/libgcc - -rm -f gcc/stmp-dirs + test ! -d gcc || (cd gcc && $(MAKE) $@) # Check target. @@ -1440,7 +1189,7 @@ stage = : @if gcc-bootstrap unstage = [ -f stage_current ] || $(MAKE) `cat stage_last`-start -stage = $(MAKE) `cat stage_current`-end +stage = [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : @endif gcc-bootstrap .PHONY: unstage stage @@ -1495,7 +1244,7 @@ POSTSTAGE1_FLAGS_TO_PASS = \ .PHONY: stage[+id+]-start stage[+id+]-end stage[+id+]-start:: - @[ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \ + @$(stage); \ echo stage[+id+] > stage_current ; \ echo stage[+id+] > stage_last; \ $(SHELL) $(srcdir)/mkinstalldirs $(HOST_SUBDIR) $(TARGET_SUBDIR)[+ @@ -1548,7 +1297,8 @@ stage[+id+]-bubble:: [+ IF prev +]stage[+prev+]-bubble[+ ENDIF +][+IF lean +] else \ $(MAKE) stage[+id+]-start; \ $(MAKE) $(RECURSE_FLAGS_TO_PASS) all-stage[+id+]; \ - fi + fi[+ IF compare-target +] + $(MAKE) [+compare-target+][+ ENDIF compare-target +] .PHONY: all-stage[+id+] clean-stage[+id+] do-clean: clean-stage[+id+] @@ -1564,7 +1314,7 @@ do-clean: clean-stage[+id+] echo Cannot compare object files as stage [+prev+] was deleted. ; \ exit 0 ; \ fi; \ - [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : ; \ + $(stage); \ rm -f .bad_compare ; \ cd stage[+id+]-gcc; \ files=`find . -name "*$(objext)" -print` ; \ @@ -1594,16 +1344,23 @@ do-clean: clean-stage[+id+] [+ IF bootstrap-target +] .PHONY: [+bootstrap-target+] -[+bootstrap-target+]: stage[+id+]-bubble - [+ IF compare-target +]$(MAKE) [+compare-target+] - [+ ENDIF compare-target +]$(MAKE) $(RECURSE_FLAGS_TO_PASS) all +[+bootstrap-target+]: + echo stage[+id+] > stage_final + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(RECURSE_FLAGS_TO_PASS) stage[+id+]-bubble + @$(unstage) + @r=`${PWD_COMMAND}`; export r; \ + s=`cd $(srcdir); ${PWD_COMMAND}`; export s; \ + $(MAKE) $(TARGET_FLAGS_TO_PASS) all-host all-target + @$(stage) [+ ENDIF bootstrap-target +] # Rules to wipe a stage and all the following ones, also used for cleanstrap [+ IF prev +]distclean-stage[+prev+]:: distclean-stage[+id+] [+ ENDIF prev +] .PHONY: distclean-stage[+id+] distclean-stage[+id+]:: - [ -f stage_current ] && $(MAKE) `cat stage_current`-end || : + @$(stage) rm -rf stage[+id+]-* [+ IF compare-target +][+compare-target+] [+ ENDIF compare-target +] diff --git a/config.guess b/config.guess index 917bbc50f36..52c01be4c86 100755 --- a/config.guess +++ b/config.guess @@ -3,7 +3,7 @@ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. -timestamp='2005-07-08' +timestamp='2005-11-11' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -779,7 +779,7 @@ EOF i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit ;; - x86:Interix*:[34]*) + x86:Interix*:[345]*) echo i586-pc-interix${UNAME_RELEASE}|sed -e 's/\..*//' exit ;; [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) @@ -794,7 +794,7 @@ EOF i*:UWIN*:*) echo ${UNAME_MACHINE}-pc-uwin exit ;; - amd64:CYGWIN*:*:*) + amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) echo x86_64-unknown-cygwin exit ;; p*:CYGWIN*:*) @@ -873,6 +873,9 @@ EOF eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } ;; + or32:Linux:*:*) + echo or32-unknown-linux-gnu + exit ;; ppc:Linux:*:*) echo powerpc-unknown-linux-gnu exit ;; @@ -1182,7 +1185,6 @@ EOF *:Darwin:*:*) UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown case $UNAME_PROCESSOR in - *86) UNAME_PROCESSOR=i686 ;; unknown) UNAME_PROCESSOR=powerpc ;; esac echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} diff --git a/config.sub b/config.sub index 1c366dfde9a..a4aba165da3 100755 --- a/config.sub +++ b/config.sub @@ -3,7 +3,7 @@ # Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, # 2000, 2001, 2002, 2003, 2004, 2005 Free Software Foundation, Inc. -timestamp='2005-07-08' +timestamp='2005-11-13' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -171,6 +171,10 @@ case $os in -hiux*) os=-hiuxwe2 ;; + -sco6) + os=-sco5v6 + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; -sco5) os=-sco3.2v5 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` @@ -187,6 +191,10 @@ case $os in # Don't forget version if it is 3.2v4 or newer. basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` ;; + -sco5v6*) + # Don't forget version if it is 3.2v4 or newer. + basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` + ;; -sco*) os=-sco3.2v2 basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` diff --git a/config/ChangeLog b/config/ChangeLog index 800698cf2b8..e98b57dcc02 100644 --- a/config/ChangeLog +++ b/config/ChangeLog @@ -1,3 +1,7 @@ +2005-12-05 Paolo Bonzini + + * acx.m4 (GCC_TARGET_TOOL): New. + 2005-09-23 Tom Tromey * enable.m4: New file. diff --git a/config/acx.m4 b/config/acx.m4 index 94e3216367b..c71f39b44b8 100644 --- a/config/acx.m4 +++ b/config/acx.m4 @@ -296,3 +296,34 @@ fi AC_SUBST(LN)dnl ]) +dnl GCC_TARGET_TOOL(PROGRAM, TARGET-VAR, HOST-VAR, IN-TREE-TOOL, LANGUAGE) +AC_DEFUN([GCC_TARGET_TOOL], +[AC_MSG_CHECKING(where to find the target $1) +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + AC_MSG_RESULT(pre-installed) +else + ifelse([$4],,, + [ok=yes + case " ${configdirs} " in + *" patsubst([$4], [/.*], []) "*) ;; + *) ok=no ;; + esac + ifelse([$5],,, + [case ,${enable_languages}, in + *,$5,*) ;; + *) ok=no ;; + esac]) + if test $ok = yes; then + # An in-tree tool is available and we can use it + $2='$$r/$(HOST_SUBDIR)/$4' + AC_MSG_RESULT(just compiled) + el])if test "x$target" = "x$host"; then + # We can use an host tool + $2='$($3)' + AC_MSG_RESULT(host tool) + else + # We need a cross tool + AC_MSG_RESULT(pre-installed) + fi +fi]) diff --git a/configure b/configure index 42b7e28ce2b..fea7e98e00b 100755 --- a/configure +++ b/configure @@ -881,7 +881,7 @@ build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fix # these libraries are used by various programs built for the host environment # -host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp" +host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber" # these tools are built for the host environment # Note, the powerpc-eabi build depends on sim occurring before gdb in order to @@ -2816,221 +2816,6 @@ esac tooldir='${exec_prefix}'/${target_alias} build_tooldir=${tooldir} -# Generate default definitions for YACC, M4, LEX and other programs that run -# on the build machine. These are used if the Makefile can't locate these -# programs in objdir. -MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing -for ac_prog in bison -do -# Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2829: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_BISON'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CONFIGURED_BISON"; then - ac_cv_prog_CONFIGURED_BISON="$CONFIGURED_BISON" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CONFIGURED_BISON="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CONFIGURED_BISON="$ac_cv_prog_CONFIGURED_BISON" -if test -n "$CONFIGURED_BISON"; then - echo "$ac_t""$CONFIGURED_BISON" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -test -n "$CONFIGURED_BISON" && break -done -test -n "$CONFIGURED_BISON" || CONFIGURED_BISON="$MISSING bison" - -for ac_prog in 'bison -y' byacc yacc -do -# Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2864: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_YACC'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CONFIGURED_YACC"; then - ac_cv_prog_CONFIGURED_YACC="$CONFIGURED_YACC" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CONFIGURED_YACC="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CONFIGURED_YACC="$ac_cv_prog_CONFIGURED_YACC" -if test -n "$CONFIGURED_YACC"; then - echo "$ac_t""$CONFIGURED_YACC" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -test -n "$CONFIGURED_YACC" && break -done -test -n "$CONFIGURED_YACC" || CONFIGURED_YACC="$MISSING bison -y" - -for ac_prog in gm4 gnum4 m4 -do -# Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2899: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_M4'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CONFIGURED_M4"; then - ac_cv_prog_CONFIGURED_M4="$CONFIGURED_M4" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CONFIGURED_M4="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CONFIGURED_M4="$ac_cv_prog_CONFIGURED_M4" -if test -n "$CONFIGURED_M4"; then - echo "$ac_t""$CONFIGURED_M4" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -test -n "$CONFIGURED_M4" && break -done -test -n "$CONFIGURED_M4" || CONFIGURED_M4="$MISSING m4" - -for ac_prog in flex -do -# Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2934: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_FLEX'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CONFIGURED_FLEX"; then - ac_cv_prog_CONFIGURED_FLEX="$CONFIGURED_FLEX" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CONFIGURED_FLEX="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CONFIGURED_FLEX="$ac_cv_prog_CONFIGURED_FLEX" -if test -n "$CONFIGURED_FLEX"; then - echo "$ac_t""$CONFIGURED_FLEX" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -test -n "$CONFIGURED_FLEX" && break -done -test -n "$CONFIGURED_FLEX" || CONFIGURED_FLEX="$MISSING flex" - -for ac_prog in flex lex -do -# Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:2969: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_LEX'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CONFIGURED_LEX"; then - ac_cv_prog_CONFIGURED_LEX="$CONFIGURED_LEX" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CONFIGURED_LEX="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CONFIGURED_LEX="$ac_cv_prog_CONFIGURED_LEX" -if test -n "$CONFIGURED_LEX"; then - echo "$ac_t""$CONFIGURED_LEX" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -test -n "$CONFIGURED_LEX" && break -done -test -n "$CONFIGURED_LEX" || CONFIGURED_LEX="$MISSING flex" - -for ac_prog in makeinfo -do -# Extract the first word of "$ac_prog", so it can be a program name with args. -set dummy $ac_prog; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3004: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_prog_CONFIGURED_MAKEINFO'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - if test -n "$CONFIGURED_MAKEINFO"; then - ac_cv_prog_CONFIGURED_MAKEINFO="$CONFIGURED_MAKEINFO" # Let the user override the test. -else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_prog_CONFIGURED_MAKEINFO="$ac_prog" - break - fi - done - IFS="$ac_save_ifs" -fi -fi -CONFIGURED_MAKEINFO="$ac_cv_prog_CONFIGURED_MAKEINFO" -if test -n "$CONFIGURED_MAKEINFO"; then - echo "$ac_t""$CONFIGURED_MAKEINFO" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - -test -n "$CONFIGURED_MAKEINFO" && break -done -test -n "$CONFIGURED_MAKEINFO" || CONFIGURED_MAKEINFO="$MISSING makeinfo" - - # Create a .gdbinit file which runs the one in srcdir # and tells GDB to look there for source files. @@ -3502,16 +3287,354 @@ done -# Host module lists & subconfigure args. +# Host module lists & subconfigure args. + + + +# Target module lists & subconfigure args. + + + +# Build tools. + + + +# Generate default definitions for YACC, M4, LEX and other programs that run +# on the build machine. These are used if the Makefile can't locate these +# programs in objdir. +MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing + +for ac_prog in 'bison -y' byacc yacc +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:3313: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$YACC"; then + ac_cv_prog_YACC="$YACC" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_YACC="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +YACC="$ac_cv_prog_YACC" +if test -n "$YACC"; then + echo "$ac_t""$YACC" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$YACC" && break +done +test -n "$YACC" || YACC="$MISSING bison -y" + +case " $build_configdirs " in + *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;; + *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;; +esac + +for ac_prog in bison +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:3353: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_BISON'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$BISON"; then + ac_cv_prog_BISON="$BISON" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_BISON="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +BISON="$ac_cv_prog_BISON" +if test -n "$BISON"; then + echo "$ac_t""$BISON" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$BISON" && break +done +test -n "$BISON" || BISON="$MISSING bison" + +case " $build_configdirs " in + *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;; +esac + +for ac_prog in gm4 gnum4 m4 +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:3392: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_M4'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$M4"; then + ac_cv_prog_M4="$M4" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_M4="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +M4="$ac_cv_prog_M4" +if test -n "$M4"; then + echo "$ac_t""$M4" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$M4" && break +done +test -n "$M4" || M4="$MISSING m4" + +case " $build_configdirs " in + *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;; +esac + +for ac_prog in flex lex +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:3431: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_LEX'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$LEX"; then + ac_cv_prog_LEX="$LEX" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_LEX="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +LEX="$ac_cv_prog_LEX" +if test -n "$LEX"; then + echo "$ac_t""$LEX" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$LEX" && break +done +test -n "$LEX" || LEX="$MISSING flex" + +case " $build_configdirs " in + *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;; + *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;; +esac + +for ac_prog in flex +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:3471: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_FLEX'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$FLEX"; then + ac_cv_prog_FLEX="$FLEX" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_FLEX="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +FLEX="$ac_cv_prog_FLEX" +if test -n "$FLEX"; then + echo "$ac_t""$FLEX" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$FLEX" && break +done +test -n "$FLEX" || FLEX="$MISSING flex" + +case " $build_configdirs " in + *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;; +esac + +for ac_prog in makeinfo +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:3510: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_MAKEINFO'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$MAKEINFO"; then + ac_cv_prog_MAKEINFO="$MAKEINFO" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_MAKEINFO="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +MAKEINFO="$ac_cv_prog_MAKEINFO" +if test -n "$MAKEINFO"; then + echo "$ac_t""$MAKEINFO" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + +test -n "$MAKEINFO" && break +done +test -n "$MAKEINFO" || MAKEINFO="$MISSING makeinfo" + +case " $build_configdirs " in + *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;; + *) + + # For an installed makeinfo, we require it to be from texinfo 4.2 or + # higher, else we use the "missing" dummy. + if ${MAKEINFO} --version \ + | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then + : + else + MAKEINFO="$MISSING makeinfo" + fi + ;; + +esac +# FIXME: expect and dejagnu may become build tools? +for ac_prog in expect +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:3563: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_EXPECT'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$EXPECT"; then + ac_cv_prog_EXPECT="$EXPECT" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_EXPECT="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +EXPECT="$ac_cv_prog_EXPECT" +if test -n "$EXPECT"; then + echo "$ac_t""$EXPECT" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi -# Target module lists & subconfigure args. +test -n "$EXPECT" && break +done +test -n "$EXPECT" || EXPECT="expect" +case " $configdirs " in + *" expect "*) + test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect' + ;; +esac +for ac_prog in runtest +do +# Extract the first word of "$ac_prog", so it can be a program name with args. +set dummy $ac_prog; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:3604: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_RUNTEST'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$RUNTEST"; then + ac_cv_prog_RUNTEST="$RUNTEST" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_RUNTEST="$ac_prog" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +RUNTEST="$ac_cv_prog_RUNTEST" +if test -n "$RUNTEST"; then + echo "$ac_t""$RUNTEST" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi -# Build tools. +test -n "$RUNTEST" && break +done +test -n "$RUNTEST" || RUNTEST="runtest" +case " $configdirs " in + *" dejagnu "*) + test $host = $build && RUNTEST='$$r/$(HOST_SUBDIR)/dejagnu/runtest' + ;; +esac # Host tools. @@ -3525,7 +3648,7 @@ test -n "$target_alias" && ncn_target_tool_prefix=$target_alias- # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3529: checking for $ac_word" >&5 +echo "configure:3652: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3556,7 +3679,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3560: checking for $ac_word" >&5 +echo "configure:3683: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3600,7 +3723,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3604: checking for $ac_word" >&5 +echo "configure:3727: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3631,7 +3754,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3635: checking for $ac_word" >&5 +echo "configure:3758: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3675,7 +3798,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3679: checking for $ac_word" >&5 +echo "configure:3802: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3706,7 +3829,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3710: checking for $ac_word" >&5 +echo "configure:3833: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3750,7 +3873,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3754: checking for $ac_word" >&5 +echo "configure:3877: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3781,7 +3904,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3785: checking for $ac_word" >&5 +echo "configure:3908: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3820,12 +3943,87 @@ if test -z "$ac_cv_prog_LD" ; then fi fi + for ncn_progname in lipo; do + if test -n "$ncn_tool_prefix"; then + # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. +set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:3952: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_LIPO="${ncn_tool_prefix}${ncn_progname}" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +LIPO="$ac_cv_prog_LIPO" +if test -n "$LIPO"; then + echo "$ac_t""$LIPO" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + fi + if test -z "$ac_cv_prog_LIPO" && test $build = $host ; then + # Extract the first word of "${ncn_progname}", so it can be a program name with args. +set dummy ${ncn_progname}; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:3983: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_LIPO'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$LIPO"; then + ac_cv_prog_LIPO="$LIPO" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_LIPO="${ncn_progname}" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +LIPO="$ac_cv_prog_LIPO" +if test -n "$LIPO"; then + echo "$ac_t""$LIPO" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + fi + test -n "$ac_cv_prog_LIPO" && break +done + +if test -z "$ac_cv_prog_LIPO" ; then + set dummy lipo + if test $build = $host ; then + LIPO="$2" + else + LIPO="${ncn_tool_prefix}$2" + fi +fi + for ncn_progname in nm; do if test -n "$ncn_tool_prefix"; then # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3829: checking for $ac_word" >&5 +echo "configure:4027: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3856,7 +4054,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3860: checking for $ac_word" >&5 +echo "configure:4058: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3900,7 +4098,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3904: checking for $ac_word" >&5 +echo "configure:4102: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3931,7 +4129,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3935: checking for $ac_word" >&5 +echo "configure:4133: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3965,12 +4163,82 @@ if test -z "$ac_cv_prog_RANLIB" ; then RANLIB=":" fi + for ncn_progname in strip; do + if test -n "$ncn_tool_prefix"; then + # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. +set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:4172: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_STRIP="${ncn_tool_prefix}${ncn_progname}" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +STRIP="$ac_cv_prog_STRIP" +if test -n "$STRIP"; then + echo "$ac_t""$STRIP" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + fi + if test -z "$ac_cv_prog_STRIP" && test $build = $host ; then + # Extract the first word of "${ncn_progname}", so it can be a program name with args. +set dummy ${ncn_progname}; ac_word=$2 +echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 +echo "configure:4203: checking for $ac_word" >&5 +if eval "test \"`echo '$''{'ac_cv_prog_STRIP'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + if test -n "$STRIP"; then + ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +else + IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" + ac_dummy="$PATH" + for ac_dir in $ac_dummy; do + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$ac_word; then + ac_cv_prog_STRIP="${ncn_progname}" + break + fi + done + IFS="$ac_save_ifs" +fi +fi +STRIP="$ac_cv_prog_STRIP" +if test -n "$STRIP"; then + echo "$ac_t""$STRIP" 1>&6 +else + echo "$ac_t""no" 1>&6 +fi + + fi + test -n "$ac_cv_prog_STRIP" && break +done + +if test -z "$ac_cv_prog_STRIP" ; then + STRIP=":" +fi + for ncn_progname in windres; do if test -n "$ncn_tool_prefix"; then # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3974: checking for $ac_word" >&5 +echo "configure:4242: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4001,7 +4269,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4005: checking for $ac_word" >&5 +echo "configure:4273: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4045,7 +4313,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4049: checking for $ac_word" >&5 +echo "configure:4317: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4076,7 +4344,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4080: checking for $ac_word" >&5 +echo "configure:4348: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJCOPY'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4120,7 +4388,7 @@ fi # Extract the first word of "${ncn_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4124: checking for $ac_word" >&5 +echo "configure:4392: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4151,7 +4419,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4155: checking for $ac_word" >&5 +echo "configure:4423: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4196,14 +4464,13 @@ fi -# Target tools. Do the tests using the names they may have passed in -# the environment, then move it to CONFIGURED_*_FOR_TARGET. +# Target tools. for ncn_progname in ar; do if test -n "$ncn_target_tool_prefix"; then # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4207: checking for $ac_word" >&5 +echo "configure:4474: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4234,7 +4501,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4238: checking for $ac_word" >&5 +echo "configure:4505: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AR_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4278,7 +4545,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4282: checking for $ac_word" >&5 +echo "configure:4549: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4309,7 +4576,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4313: checking for $ac_word" >&5 +echo "configure:4580: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_AS_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4353,7 +4620,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4357: checking for $ac_word" >&5 +echo "configure:4624: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4384,7 +4651,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4388: checking for $ac_word" >&5 +echo "configure:4655: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4428,7 +4695,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4432: checking for $ac_word" >&5 +echo "configure:4699: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4459,7 +4726,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4463: checking for $ac_word" >&5 +echo "configure:4730: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CXX_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4503,7 +4770,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4507: checking for $ac_word" >&5 +echo "configure:4774: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4534,7 +4801,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4538: checking for $ac_word" >&5 +echo "configure:4805: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_DLLTOOL_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4578,7 +4845,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4582: checking for $ac_word" >&5 +echo "configure:4849: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4609,7 +4876,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4613: checking for $ac_word" >&5 +echo "configure:4880: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GCC_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4648,7 +4915,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4652: checking for $ac_word" >&5 +echo "configure:4919: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4679,7 +4946,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4683: checking for $ac_word" >&5 +echo "configure:4950: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GCJ_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4723,7 +4990,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4727: checking for $ac_word" >&5 +echo "configure:4994: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4754,7 +5021,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4758: checking for $ac_word" >&5 +echo "configure:5025: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_GFORTRAN_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4798,7 +5065,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4802: checking for $ac_word" >&5 +echo "configure:5069: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4829,7 +5096,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4833: checking for $ac_word" >&5 +echo "configure:5100: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LD_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4873,7 +5140,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4877: checking for $ac_word" >&5 +echo "configure:5144: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4904,7 +5171,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4908: checking for $ac_word" >&5 +echo "configure:5175: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LIPO_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4948,7 +5215,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4952: checking for $ac_word" >&5 +echo "configure:5219: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4979,7 +5246,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4983: checking for $ac_word" >&5 +echo "configure:5250: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_NM_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5023,7 +5290,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5027: checking for $ac_word" >&5 +echo "configure:5294: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5054,7 +5321,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5058: checking for $ac_word" >&5 +echo "configure:5325: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_OBJDUMP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5098,7 +5365,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5102: checking for $ac_word" >&5 +echo "configure:5369: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5129,7 +5396,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5133: checking for $ac_word" >&5 +echo "configure:5400: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5168,7 +5435,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5172: checking for $ac_word" >&5 +echo "configure:5439: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5199,7 +5466,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5203: checking for $ac_word" >&5 +echo "configure:5470: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_STRIP_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5243,7 +5510,7 @@ fi # Extract the first word of "${ncn_target_tool_prefix}${ncn_progname}", so it can be a program name with args. set dummy ${ncn_target_tool_prefix}${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5247: checking for $ac_word" >&5 +echo "configure:5514: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5274,7 +5541,7 @@ fi # Extract the first word of "${ncn_progname}", so it can be a program name with args. set dummy ${ncn_progname}; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:5278: checking for $ac_word" >&5 +echo "configure:5545: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_WINDRES_FOR_TARGET'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5314,77 +5581,440 @@ if test -z "$ac_cv_prog_WINDRES_FOR_TARGET" ; then fi -CONFIGURED_AR_FOR_TARGET="$AR_FOR_TARGET" -CONFIGURED_AS_FOR_TARGET="$AS_FOR_TARGET" -CONFIGURED_CC_FOR_TARGET="$CC_FOR_TARGET" -CONFIGURED_CXX_FOR_TARGET="$CXX_FOR_TARGET" -CONFIGURED_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" -CONFIGURED_GCC_FOR_TARGET="$GCC_FOR_TARGET" -CONFIGURED_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" -CONFIGURED_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" -CONFIGURED_LD_FOR_TARGET="$LD_FOR_TARGET" -CONFIGURED_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" -CONFIGURED_NM_FOR_TARGET="$NM_FOR_TARGET" -CONFIGURED_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" -CONFIGURED_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" -CONFIGURED_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" -CONFIGURED_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" - - - -# Fix up target tools. -if test "x${build}" = "x${host}" ; then - # In this case, the newly built tools can and should be used, - # so we override the results of the autoconf tests. - # This should really only happen when the tools are actually being built, - # but that's a further refinement. The new build scheme, where - # tools are built into a structure paralleling where they're installed, - # should also eliminate all of this cleanly. - AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)" - AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)" - CC_FOR_TARGET="\$(USUAL_CC_FOR_TARGET)" - CXX_FOR_TARGET="\$(USUAL_CXX_FOR_TARGET)" - RAW_CXX_FOR_TARGET="\$(USUAL_RAW_CXX_FOR_TARGET)" - DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)" - GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)" - GCJ_FOR_TARGET="\$(USUAL_GCJ_FOR_TARGET)" - GFORTRAN_FOR_TARGET="\$(USUAL_GFORTRAN_FOR_TARGET)" - LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)" - LIPO_FOR_TARGET="\$(USUAL_LIPO_FOR_TARGET)" - NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)" - OBJDUMP_FOR_TARGET="\$(USUAL_OBJDUMP_FOR_TARGET)" - RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)" - STRIP_FOR_TARGET="\$(USUAL_STRIP_FOR_TARGET)" - WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)" -else - # Just use the ones we found. - AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)" - AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)" - CC_FOR_TARGET="\$(CONFIGURED_CC_FOR_TARGET)" - CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)" - RAW_CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)" - DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)" - GCC_FOR_TARGET="\$(CONFIGURED_GCC_FOR_TARGET)" - GCJ_FOR_TARGET="\$(CONFIGURED_GCJ_FOR_TARGET)" - GFORTRAN_FOR_TARGET="\$(CONFIGURED_GFORTRAN_FOR_TARGET)" - LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)" - LIPO_FOR_TARGET="\$(CONFIGURED_LIPO_FOR_TARGET)" - NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)" - OBJDUMP_FOR_TARGET="\$(CONFIGURED_OBJDUMP_FOR_TARGET)" - RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)" - STRIP_FOR_TARGET="\$(CONFIGURED_STRIP_FOR_TARGET)" - WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)" +RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET" + +echo $ac_n "checking where to find the target ar""... $ac_c" 1>&6 +echo "configure:5588: checking where to find the target ar" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + ok=yes + case " ${configdirs} " in + *" binutils "*) ;; + *) ok=no ;; + esac + + if test $ok = yes; then + # An in-tree tool is available and we can use it + AR_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ar' + echo "$ac_t""just compiled" 1>&6 + elif test "x$target" = "x$host"; then + # We can use an host tool + AR_FOR_TARGET='$(AR)' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi +fi +echo $ac_n "checking where to find the target as""... $ac_c" 1>&6 +echo "configure:5613: checking where to find the target as" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + ok=yes + case " ${configdirs} " in + *" gas "*) ;; + *) ok=no ;; + esac + + if test $ok = yes; then + # An in-tree tool is available and we can use it + AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gas/as-new' + echo "$ac_t""just compiled" 1>&6 + elif test "x$target" = "x$host"; then + # We can use an host tool + AS_FOR_TARGET='$(AS)' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi +fi +echo $ac_n "checking where to find the target cc""... $ac_c" 1>&6 +echo "configure:5638: checking where to find the target cc" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + ok=yes + case " ${configdirs} " in + *" gcc "*) ;; + *) ok=no ;; + esac + + if test $ok = yes; then + # An in-tree tool is available and we can use it + CC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' + echo "$ac_t""just compiled" 1>&6 + elif test "x$target" = "x$host"; then + # We can use an host tool + CC_FOR_TARGET='$(CC)' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi +fi +echo $ac_n "checking where to find the target c++""... $ac_c" 1>&6 +echo "configure:5663: checking where to find the target c++" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + ok=yes + case " ${configdirs} " in + *" gcc "*) ;; + *) ok=no ;; + esac + case ,${enable_languages}, in + *,c++,*) ;; + *) ok=no ;; + esac + if test $ok = yes; then + # An in-tree tool is available and we can use it + CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs' + echo "$ac_t""just compiled" 1>&6 + elif test "x$target" = "x$host"; then + # We can use an host tool + CXX_FOR_TARGET='$(CXX)' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi +fi +echo $ac_n "checking where to find the target c++ for libstdc++""... $ac_c" 1>&6 +echo "configure:5691: checking where to find the target c++ for libstdc++" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + ok=yes + case " ${configdirs} " in + *" gcc "*) ;; + *) ok=no ;; + esac + case ,${enable_languages}, in + *,c++,*) ;; + *) ok=no ;; + esac + if test $ok = yes; then + # An in-tree tool is available and we can use it + RAW_CXX_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs' + echo "$ac_t""just compiled" 1>&6 + elif test "x$target" = "x$host"; then + # We can use an host tool + RAW_CXX_FOR_TARGET='$(CXX)' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi +fi +echo $ac_n "checking where to find the target dlltool""... $ac_c" 1>&6 +echo "configure:5719: checking where to find the target dlltool" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + ok=yes + case " ${configdirs} " in + *" binutils "*) ;; + *) ok=no ;; + esac + + if test $ok = yes; then + # An in-tree tool is available and we can use it + DLLTOOL_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/dlltool' + echo "$ac_t""just compiled" 1>&6 + elif test "x$target" = "x$host"; then + # We can use an host tool + DLLTOOL_FOR_TARGET='$(DLLTOOL)' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi +fi +echo $ac_n "checking where to find the target gcc""... $ac_c" 1>&6 +echo "configure:5744: checking where to find the target gcc" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + ok=yes + case " ${configdirs} " in + *" gcc "*) ;; + *) ok=no ;; + esac + + if test $ok = yes; then + # An in-tree tool is available and we can use it + GCC_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/' + echo "$ac_t""just compiled" 1>&6 + elif test "x$target" = "x$host"; then + # We can use an host tool + GCC_FOR_TARGET='$()' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi +fi +echo $ac_n "checking where to find the target gcj""... $ac_c" 1>&6 +echo "configure:5769: checking where to find the target gcj" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + ok=yes + case " ${configdirs} " in + *" gcc "*) ;; + *) ok=no ;; + esac + case ,${enable_languages}, in + *,java,*) ;; + *) ok=no ;; + esac + if test $ok = yes; then + # An in-tree tool is available and we can use it + GCJ_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/' + echo "$ac_t""just compiled" 1>&6 + elif test "x$target" = "x$host"; then + # We can use an host tool + GCJ_FOR_TARGET='$(GCJ)' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi +fi +echo $ac_n "checking where to find the target gfortran""... $ac_c" 1>&6 +echo "configure:5797: checking where to find the target gfortran" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + ok=yes + case " ${configdirs} " in + *" gcc "*) ;; + *) ok=no ;; + esac + case ,${enable_languages}, in + *,fortran,*) ;; + *) ok=no ;; + esac + if test $ok = yes; then + # An in-tree tool is available and we can use it + GFORTRAN_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/' + echo "$ac_t""just compiled" 1>&6 + elif test "x$target" = "x$host"; then + # We can use an host tool + GFORTRAN_FOR_TARGET='$(GFORTRAN)' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi +fi +echo $ac_n "checking where to find the target ld""... $ac_c" 1>&6 +echo "configure:5825: checking where to find the target ld" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + ok=yes + case " ${configdirs} " in + *" ld "*) ;; + *) ok=no ;; + esac + + if test $ok = yes; then + # An in-tree tool is available and we can use it + LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/ld/ld-new' + echo "$ac_t""just compiled" 1>&6 + elif test "x$target" = "x$host"; then + # We can use an host tool + LD_FOR_TARGET='$(LD)' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi +fi +echo $ac_n "checking where to find the target lipo""... $ac_c" 1>&6 +echo "configure:5850: checking where to find the target lipo" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + if test "x$target" = "x$host"; then + # We can use an host tool + LIPO_FOR_TARGET='$(LIPO)' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi +fi +echo $ac_n "checking where to find the target nm""... $ac_c" 1>&6 +echo "configure:5865: checking where to find the target nm" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + ok=yes + case " ${configdirs} " in + *" binutils "*) ;; + *) ok=no ;; + esac + + if test $ok = yes; then + # An in-tree tool is available and we can use it + NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/nm-new' + echo "$ac_t""just compiled" 1>&6 + elif test "x$target" = "x$host"; then + # We can use an host tool + NM_FOR_TARGET='$(NM)' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi +fi +echo $ac_n "checking where to find the target objdump""... $ac_c" 1>&6 +echo "configure:5890: checking where to find the target objdump" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + ok=yes + case " ${configdirs} " in + *" binutils "*) ;; + *) ok=no ;; + esac + + if test $ok = yes; then + # An in-tree tool is available and we can use it + OBJDUMP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/objdump' + echo "$ac_t""just compiled" 1>&6 + elif test "x$target" = "x$host"; then + # We can use an host tool + OBJDUMP_FOR_TARGET='$(OBJDUMP)' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi +fi +echo $ac_n "checking where to find the target ranlib""... $ac_c" 1>&6 +echo "configure:5915: checking where to find the target ranlib" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + ok=yes + case " ${configdirs} " in + *" binutils "*) ;; + *) ok=no ;; + esac + + if test $ok = yes; then + # An in-tree tool is available and we can use it + RANLIB_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/ranlib' + echo "$ac_t""just compiled" 1>&6 + elif test "x$target" = "x$host"; then + # We can use an host tool + RANLIB_FOR_TARGET='$(RANLIB)' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi +fi +echo $ac_n "checking where to find the target strip""... $ac_c" 1>&6 +echo "configure:5940: checking where to find the target strip" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + ok=yes + case " ${configdirs} " in + *" binutils "*) ;; + *) ok=no ;; + esac + + if test $ok = yes; then + # An in-tree tool is available and we can use it + STRIP_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/strip' + echo "$ac_t""just compiled" 1>&6 + elif test "x$target" = "x$host"; then + # We can use an host tool + STRIP_FOR_TARGET='$(STRIP)' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi +fi +echo $ac_n "checking where to find the target windres""... $ac_c" 1>&6 +echo "configure:5965: checking where to find the target windres" >&5 +if test "x${build}" != "x${host}" ; then + # Canadian cross, just use what we found + echo "$ac_t""pre-installed" 1>&6 +else + ok=yes + case " ${configdirs} " in + *" binutils "*) ;; + *) ok=no ;; + esac + + if test $ok = yes; then + # An in-tree tool is available and we can use it + WINDRES_FOR_TARGET='$$r/$(HOST_SUBDIR)/binutils/windres' + echo "$ac_t""just compiled" 1>&6 + elif test "x$target" = "x$host"; then + # We can use an host tool + WINDRES_FOR_TARGET='$(WINDRES)' + echo "$ac_t""host tool" 1>&6 + else + # We need a cross tool + echo "$ac_t""pre-installed" 1>&6 + fi fi + # Certain tools may need extra flags. AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target} RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target} NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target} +# When building target libraries, except in a Canadian cross, we use +# the same toolchain as the compiler we just built. +COMPILER_AS_FOR_TARGET='$(AS_FOR_TARGET)' +COMPILER_LD_FOR_TARGET='$(LD_FOR_TARGET)' +COMPILER_NM_FOR_TARGET='$(NM_FOR_TARGET)' +if test $host = $build; then + case " $configdirs " in + *" gcc "*) + COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as' + COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld' + COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'${extra_nmflags_for_target} + ;; + esac +fi + + + + + echo $ac_n "checking whether to enable maintainer-specific portions of Makefiles""... $ac_c" 1>&6 -echo "configure:5388: checking whether to enable maintainer-specific portions of Makefiles" >&5 +echo "configure:6018: checking whether to enable maintainer-specific portions of Makefiles" >&5 # Check whether --enable-maintainer-mode or --disable-maintainer-mode was given. if test "${enable_maintainer_mode+set}" = set; then enableval="$enable_maintainer_mode" @@ -5431,7 +6061,7 @@ esac # gcc for stageN-gcc and stagePREV-gcc for stage(N-1). In case this is not # possible, however, we can resort to mv. echo $ac_n "checking if symbolic links between directories work""... $ac_c" 1>&6 -echo "configure:5435: checking if symbolic links between directories work" >&5 +echo "configure:6065: checking if symbolic links between directories work" >&5 if eval "test \"`echo '$''{'gcc_cv_prog_ln_s_dir'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -5655,12 +6285,6 @@ s%@gmplibs@%$gmplibs%g s%@gmpinc@%$gmpinc%g s%@stage1_languages@%$stage1_languages%g s%@SYSROOT_CFLAGS_FOR_TARGET@%$SYSROOT_CFLAGS_FOR_TARGET%g -s%@CONFIGURED_BISON@%$CONFIGURED_BISON%g -s%@CONFIGURED_YACC@%$CONFIGURED_YACC%g -s%@CONFIGURED_M4@%$CONFIGURED_M4%g -s%@CONFIGURED_FLEX@%$CONFIGURED_FLEX%g -s%@CONFIGURED_LEX@%$CONFIGURED_LEX%g -s%@CONFIGURED_MAKEINFO@%$CONFIGURED_MAKEINFO%g s%@bootstrap_lean@%$bootstrap_lean%g /@serialization_dependencies@/r $serialization_dependencies s%@serialization_dependencies@%%g @@ -5688,12 +6312,22 @@ s%@target_configargs@%$target_configargs%g s%@target_configdirs@%$target_configdirs%g s%@CC_FOR_BUILD@%$CC_FOR_BUILD%g s%@config_shell@%$config_shell%g +s%@YACC@%$YACC%g +s%@BISON@%$BISON%g +s%@M4@%$M4%g +s%@LEX@%$LEX%g +s%@FLEX@%$FLEX%g +s%@MAKEINFO@%$MAKEINFO%g +s%@EXPECT@%$EXPECT%g +s%@RUNTEST@%$RUNTEST%g s%@AR@%$AR%g s%@AS@%$AS%g s%@DLLTOOL@%$DLLTOOL%g s%@LD@%$LD%g +s%@LIPO@%$LIPO%g s%@NM@%$NM%g s%@RANLIB@%$RANLIB%g +s%@STRIP@%$STRIP%g s%@WINDRES@%$WINDRES%g s%@OBJCOPY@%$OBJCOPY%g s%@OBJDUMP@%$OBJDUMP%g @@ -5714,23 +6348,11 @@ s%@OBJDUMP_FOR_TARGET@%$OBJDUMP_FOR_TARGET%g s%@RANLIB_FOR_TARGET@%$RANLIB_FOR_TARGET%g s%@STRIP_FOR_TARGET@%$STRIP_FOR_TARGET%g s%@WINDRES_FOR_TARGET@%$WINDRES_FOR_TARGET%g -s%@CONFIGURED_AR_FOR_TARGET@%$CONFIGURED_AR_FOR_TARGET%g -s%@CONFIGURED_AS_FOR_TARGET@%$CONFIGURED_AS_FOR_TARGET%g -s%@CONFIGURED_CC_FOR_TARGET@%$CONFIGURED_CC_FOR_TARGET%g -s%@CONFIGURED_CXX_FOR_TARGET@%$CONFIGURED_CXX_FOR_TARGET%g -s%@CONFIGURED_DLLTOOL_FOR_TARGET@%$CONFIGURED_DLLTOOL_FOR_TARGET%g -s%@CONFIGURED_GCC_FOR_TARGET@%$CONFIGURED_GCC_FOR_TARGET%g -s%@CONFIGURED_GCJ_FOR_TARGET@%$CONFIGURED_GCJ_FOR_TARGET%g -s%@CONFIGURED_GFORTRAN_FOR_TARGET@%$CONFIGURED_GFORTRAN_FOR_TARGET%g -s%@CONFIGURED_LD_FOR_TARGET@%$CONFIGURED_LD_FOR_TARGET%g -s%@CONFIGURED_LIPO_FOR_TARGET@%$CONFIGURED_LIPO_FOR_TARGET%g -s%@CONFIGURED_NM_FOR_TARGET@%$CONFIGURED_NM_FOR_TARGET%g -s%@CONFIGURED_OBJDUMP_FOR_TARGET@%$CONFIGURED_OBJDUMP_FOR_TARGET%g -s%@CONFIGURED_RANLIB_FOR_TARGET@%$CONFIGURED_RANLIB_FOR_TARGET%g -s%@CONFIGURED_STRIP_FOR_TARGET@%$CONFIGURED_STRIP_FOR_TARGET%g -s%@CONFIGURED_WINDRES_FOR_TARGET@%$CONFIGURED_WINDRES_FOR_TARGET%g s%@FLAGS_FOR_TARGET@%$FLAGS_FOR_TARGET%g s%@RAW_CXX_FOR_TARGET@%$RAW_CXX_FOR_TARGET%g +s%@COMPILER_AS_FOR_TARGET@%$COMPILER_AS_FOR_TARGET%g +s%@COMPILER_LD_FOR_TARGET@%$COMPILER_LD_FOR_TARGET%g +s%@COMPILER_NM_FOR_TARGET@%$COMPILER_NM_FOR_TARGET%g s%@MAINTAINER_MODE_TRUE@%$MAINTAINER_MODE_TRUE%g s%@MAINTAINER_MODE_FALSE@%$MAINTAINER_MODE_FALSE%g s%@MAINT@%$MAINT%g diff --git a/configure.in b/configure.in index c9169b6bd58..d3a7067855a 100644 --- a/configure.in +++ b/configure.in @@ -123,7 +123,7 @@ build_tools="build-texinfo build-byacc build-flex build-bison build-m4 build-fix # these libraries are used by various programs built for the host environment # -host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp" +host_libs="intl mmalloc libiberty opcodes bfd readline tcl tk itcl libgui zlib libcpp libdecnumber" # these tools are built for the host environment # Note, the powerpc-eabi build depends on sim occurring before gdb in order to @@ -1611,17 +1611,6 @@ esac tooldir='${exec_prefix}'/${target_alias} build_tooldir=${tooldir} -# Generate default definitions for YACC, M4, LEX and other programs that run -# on the build machine. These are used if the Makefile can't locate these -# programs in objdir. -MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing -AC_CHECK_PROGS([CONFIGURED_BISON], [bison], [$MISSING bison]) -AC_CHECK_PROGS([CONFIGURED_YACC], ['bison -y' byacc yacc], [$MISSING bison -y]) -AC_CHECK_PROGS([CONFIGURED_M4], [gm4 gnum4 m4], [$MISSING m4]) -AC_CHECK_PROGS([CONFIGURED_FLEX], [flex], [$MISSING flex]) -AC_CHECK_PROGS([CONFIGURED_LEX], [flex lex], [$MISSING flex]) -AC_CHECK_PROGS([CONFIGURED_MAKEINFO], makeinfo, [$MISSING makeinfo]) - # Create a .gdbinit file which runs the one in srcdir # and tells GDB to look there for source files. @@ -2099,13 +2088,81 @@ AC_SUBST(target_configdirs) AC_SUBST(CC_FOR_BUILD) AC_SUBST(config_shell) +# Generate default definitions for YACC, M4, LEX and other programs that run +# on the build machine. These are used if the Makefile can't locate these +# programs in objdir. +MISSING=`cd $ac_aux_dir && ${PWDCMD-pwd}`/missing + +AC_CHECK_PROGS([YACC], ['bison -y' byacc yacc], [$MISSING bison -y]) +case " $build_configdirs " in + *" bison "*) YACC='$$r/$(BUILD_SUBDIR)/bison/tests/bison -y' ;; + *" byacc "*) YACC='$$r/$(BUILD_SUBDIR)/byacc/byacc' ;; +esac + +AC_CHECK_PROGS([BISON], [bison], [$MISSING bison]) +case " $build_configdirs " in + *" bison "*) BISON='$$r/$(BUILD_SUBDIR)/bison/tests/bison' ;; +esac + +AC_CHECK_PROGS([M4], [gm4 gnum4 m4], [$MISSING m4]) +case " $build_configdirs " in + *" m4 "*) M4='$$r/$(BUILD_SUBDIR)/m4/m4' ;; +esac + +AC_CHECK_PROGS([LEX], [flex lex], [$MISSING flex]) +case " $build_configdirs " in + *" flex "*) LEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;; + *" lex "*) LEX='$$r/$(BUILD_SUBDIR)/lex/lex' ;; +esac + +AC_CHECK_PROGS([FLEX], [flex], [$MISSING flex]) +case " $build_configdirs " in + *" flex "*) FLEX='$$r/$(BUILD_SUBDIR)/flex/flex' ;; +esac + +AC_CHECK_PROGS([MAKEINFO], makeinfo, [$MISSING makeinfo]) +case " $build_configdirs " in + *" texinfo "*) MAKEINFO='$$r/$(BUILD_SUBDIR)/texinfo/makeinfo/makeinfo' ;; + *) +changequote(,) + # For an installed makeinfo, we require it to be from texinfo 4.2 or + # higher, else we use the "missing" dummy. + if ${MAKEINFO} --version \ + | egrep 'texinfo[^0-9]*([1-3][0-9]|4\.[2-9]|[5-9])' >/dev/null 2>&1; then + : + else + MAKEINFO="$MISSING makeinfo" + fi + ;; +changequote([,]) +esac + +# FIXME: expect and dejagnu may become build tools? + +AC_CHECK_PROGS(EXPECT, expect, expect) +case " $configdirs " in + *" expect "*) + test $host = $build && EXPECT='$$r/$(HOST_SUBDIR)/expect/expect' + ;; +esac + +AC_CHECK_PROGS(RUNTEST, runtest, runtest) +case " $configdirs " in + *" dejagnu "*) + test $host = $build && RUNTEST='$$r/$(HOST_SUBDIR)/dejagnu/runtest' + ;; +esac + + # Host tools. NCN_STRICT_CHECK_TOOLS(AR, ar) NCN_STRICT_CHECK_TOOLS(AS, as) NCN_STRICT_CHECK_TOOLS(DLLTOOL, dlltool) NCN_STRICT_CHECK_TOOLS(LD, ld) +NCN_STRICT_CHECK_TOOLS(LIPO, lipo) NCN_STRICT_CHECK_TOOLS(NM, nm) NCN_STRICT_CHECK_TOOLS(RANLIB, ranlib, :) +NCN_STRICT_CHECK_TOOLS(STRIP, strip, :) NCN_STRICT_CHECK_TOOLS(WINDRES, windres) NCN_STRICT_CHECK_TOOLS(OBJCOPY, objcopy) NCN_STRICT_CHECK_TOOLS(OBJDUMP, objdump) @@ -2115,8 +2172,7 @@ AC_SUBST(CFLAGS) AC_SUBST(CFLAGS_FOR_BUILD) AC_SUBST(CXXFLAGS) -# Target tools. Do the tests using the names they may have passed in -# the environment, then move it to CONFIGURED_*_FOR_TARGET. +# Target tools. NCN_STRICT_CHECK_TARGET_TOOLS(AR_FOR_TARGET, ar) NCN_STRICT_CHECK_TARGET_TOOLS(AS_FOR_TARGET, as) NCN_STRICT_CHECK_TARGET_TOOLS(CC_FOR_TARGET, cc gcc) @@ -2133,83 +2189,32 @@ NCN_STRICT_CHECK_TARGET_TOOLS(RANLIB_FOR_TARGET, ranlib, :) NCN_STRICT_CHECK_TARGET_TOOLS(STRIP_FOR_TARGET, strip) NCN_STRICT_CHECK_TARGET_TOOLS(WINDRES_FOR_TARGET, windres) -CONFIGURED_AR_FOR_TARGET="$AR_FOR_TARGET" -CONFIGURED_AS_FOR_TARGET="$AS_FOR_TARGET" -CONFIGURED_CC_FOR_TARGET="$CC_FOR_TARGET" -CONFIGURED_CXX_FOR_TARGET="$CXX_FOR_TARGET" -CONFIGURED_DLLTOOL_FOR_TARGET="$DLLTOOL_FOR_TARGET" -CONFIGURED_GCC_FOR_TARGET="$GCC_FOR_TARGET" -CONFIGURED_GCJ_FOR_TARGET="$GCJ_FOR_TARGET" -CONFIGURED_GFORTRAN_FOR_TARGET="$GFORTRAN_FOR_TARGET" -CONFIGURED_LD_FOR_TARGET="$LD_FOR_TARGET" -CONFIGURED_LIPO_FOR_TARGET="$LIPO_FOR_TARGET" -CONFIGURED_NM_FOR_TARGET="$NM_FOR_TARGET" -CONFIGURED_OBJDUMP_FOR_TARGET="$OBJDUMP_FOR_TARGET" -CONFIGURED_RANLIB_FOR_TARGET="$RANLIB_FOR_TARGET" -CONFIGURED_STRIP_FOR_TARGET="$STRIP_FOR_TARGET" -CONFIGURED_WINDRES_FOR_TARGET="$WINDRES_FOR_TARGET" - -AC_SUBST(CONFIGURED_AR_FOR_TARGET)dnl -AC_SUBST(CONFIGURED_AS_FOR_TARGET)dnl -AC_SUBST(CONFIGURED_CC_FOR_TARGET)dnl -AC_SUBST(CONFIGURED_CXX_FOR_TARGET)dnl -AC_SUBST(CONFIGURED_DLLTOOL_FOR_TARGET)dnl -AC_SUBST(CONFIGURED_GCC_FOR_TARGET)dnl -AC_SUBST(CONFIGURED_GCJ_FOR_TARGET)dnl -AC_SUBST(CONFIGURED_GFORTRAN_FOR_TARGET)dnl -AC_SUBST(CONFIGURED_LD_FOR_TARGET)dnl -AC_SUBST(CONFIGURED_LIPO_FOR_TARGET)dnl -AC_SUBST(CONFIGURED_NM_FOR_TARGET)dnl -AC_SUBST(CONFIGURED_OBJDUMP_FOR_TARGET)dnl -AC_SUBST(CONFIGURED_RANLIB_FOR_TARGET)dnl -AC_SUBST(CONFIGURED_STRIP_FOR_TARGET)dnl -AC_SUBST(CONFIGURED_WINDRES_FOR_TARGET)dnl -AC_SUBST(FLAGS_FOR_TARGET) - -# Fix up target tools. -if test "x${build}" = "x${host}" ; then - # In this case, the newly built tools can and should be used, - # so we override the results of the autoconf tests. - # This should really only happen when the tools are actually being built, - # but that's a further refinement. The new build scheme, where - # tools are built into a structure paralleling where they're installed, - # should also eliminate all of this cleanly. - AR_FOR_TARGET="\$(USUAL_AR_FOR_TARGET)" - AS_FOR_TARGET="\$(USUAL_AS_FOR_TARGET)" - CC_FOR_TARGET="\$(USUAL_CC_FOR_TARGET)" - CXX_FOR_TARGET="\$(USUAL_CXX_FOR_TARGET)" - RAW_CXX_FOR_TARGET="\$(USUAL_RAW_CXX_FOR_TARGET)" - DLLTOOL_FOR_TARGET="\$(USUAL_DLLTOOL_FOR_TARGET)" - GCC_FOR_TARGET="\$(USUAL_GCC_FOR_TARGET)" - GCJ_FOR_TARGET="\$(USUAL_GCJ_FOR_TARGET)" - GFORTRAN_FOR_TARGET="\$(USUAL_GFORTRAN_FOR_TARGET)" - LD_FOR_TARGET="\$(USUAL_LD_FOR_TARGET)" - LIPO_FOR_TARGET="\$(USUAL_LIPO_FOR_TARGET)" - NM_FOR_TARGET="\$(USUAL_NM_FOR_TARGET)" - OBJDUMP_FOR_TARGET="\$(USUAL_OBJDUMP_FOR_TARGET)" - RANLIB_FOR_TARGET="\$(USUAL_RANLIB_FOR_TARGET)" - STRIP_FOR_TARGET="\$(USUAL_STRIP_FOR_TARGET)" - WINDRES_FOR_TARGET="\$(USUAL_WINDRES_FOR_TARGET)" -else - # Just use the ones we found. - AR_FOR_TARGET="\$(CONFIGURED_AR_FOR_TARGET)" - AS_FOR_TARGET="\$(CONFIGURED_AS_FOR_TARGET)" - CC_FOR_TARGET="\$(CONFIGURED_CC_FOR_TARGET)" - CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)" - RAW_CXX_FOR_TARGET="\$(CONFIGURED_CXX_FOR_TARGET)" - DLLTOOL_FOR_TARGET="\$(CONFIGURED_DLLTOOL_FOR_TARGET)" - GCC_FOR_TARGET="\$(CONFIGURED_GCC_FOR_TARGET)" - GCJ_FOR_TARGET="\$(CONFIGURED_GCJ_FOR_TARGET)" - GFORTRAN_FOR_TARGET="\$(CONFIGURED_GFORTRAN_FOR_TARGET)" - LD_FOR_TARGET="\$(CONFIGURED_LD_FOR_TARGET)" - LIPO_FOR_TARGET="\$(CONFIGURED_LIPO_FOR_TARGET)" - NM_FOR_TARGET="\$(CONFIGURED_NM_FOR_TARGET)" - OBJDUMP_FOR_TARGET="\$(CONFIGURED_OBJDUMP_FOR_TARGET)" - RANLIB_FOR_TARGET="\$(CONFIGURED_RANLIB_FOR_TARGET)" - STRIP_FOR_TARGET="\$(CONFIGURED_STRIP_FOR_TARGET)" - WINDRES_FOR_TARGET="\$(CONFIGURED_WINDRES_FOR_TARGET)" -fi +RAW_CXX_FOR_TARGET="$CXX_FOR_TARGET" + +GCC_TARGET_TOOL(ar, AR_FOR_TARGET, AR, [binutils/ar]) +GCC_TARGET_TOOL(as, AS_FOR_TARGET, AS, [gas/as-new]) +GCC_TARGET_TOOL(cc, CC_FOR_TARGET, CC, [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/]) +GCC_TARGET_TOOL(c++, CXX_FOR_TARGET, CXX, + [gcc/g++ -B$$r/$(HOST_SUBDIR)/gcc/ -nostdinc++ `test ! -f $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags || $(SHELL) $$r/$(TARGET_SUBDIR)/libstdc++-v3/scripts/testsuite_flags --build-includes` -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs], + c++) +GCC_TARGET_TOOL(c++ for libstdc++, RAW_CXX_FOR_TARGET, CXX, + [gcc/xgcc -shared-libgcc -B$$r/$(HOST_SUBDIR)/gcc -nostdinc++ -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src -L$$r/$(TARGET_SUBDIR)/libstdc++-v3/src/.libs], + c++) +GCC_TARGET_TOOL(dlltool, DLLTOOL_FOR_TARGET, DLLTOOL, [binutils/dlltool]) +GCC_TARGET_TOOL(gcc, GCC_FOR_TARGET, , [gcc/xgcc -B$$r/$(HOST_SUBDIR)/gcc/]) +GCC_TARGET_TOOL(gcj, GCJ_FOR_TARGET, GCJ, + [gcc/gcj -B$$r/$(HOST_SUBDIR)/gcc/], java) +GCC_TARGET_TOOL(gfortran, GFORTRAN_FOR_TARGET, GFORTRAN, + [gcc/gfortran -B$$r/$(HOST_SUBDIR)/gcc/], fortran) +GCC_TARGET_TOOL(ld, LD_FOR_TARGET, LD, [ld/ld-new]) +GCC_TARGET_TOOL(lipo, LIPO_FOR_TARGET, LIPO) +GCC_TARGET_TOOL(nm, NM_FOR_TARGET, NM, [binutils/nm-new]) +GCC_TARGET_TOOL(objdump, OBJDUMP_FOR_TARGET, OBJDUMP, [binutils/objdump]) +GCC_TARGET_TOOL(ranlib, RANLIB_FOR_TARGET, RANLIB, [binutils/ranlib]) +GCC_TARGET_TOOL(strip, STRIP_FOR_TARGET, STRIP, [binutils/strip]) +GCC_TARGET_TOOL(windres, WINDRES_FOR_TARGET, WINDRES, [binutils/windres]) +AC_SUBST(FLAGS_FOR_TARGET) AC_SUBST(RAW_CXX_FOR_TARGET) # Certain tools may need extra flags. @@ -2217,6 +2222,25 @@ AR_FOR_TARGET=${AR_FOR_TARGET}${extra_arflags_for_target} RANLIB_FOR_TARGET=${RANLIB_FOR_TARGET}${extra_ranlibflags_for_target} NM_FOR_TARGET=${NM_FOR_TARGET}${extra_nmflags_for_target} +# When building target libraries, except in a Canadian cross, we use +# the same toolchain as the compiler we just built. +COMPILER_AS_FOR_TARGET='$(AS_FOR_TARGET)' +COMPILER_LD_FOR_TARGET='$(LD_FOR_TARGET)' +COMPILER_NM_FOR_TARGET='$(NM_FOR_TARGET)' +if test $host = $build; then + case " $configdirs " in + *" gcc "*) + COMPILER_AS_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/as' + COMPILER_LD_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/collect-ld' + COMPILER_NM_FOR_TARGET='$$r/$(HOST_SUBDIR)/gcc/nm'${extra_nmflags_for_target} + ;; + esac +fi + +AC_SUBST(COMPILER_AS_FOR_TARGET) +AC_SUBST(COMPILER_LD_FOR_TARGET) +AC_SUBST(COMPILER_NM_FOR_TARGET) + AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles]) AC_ARG_ENABLE(maintainer-mode, [ --enable-maintainer-mode enable make rules and dependencies not useful -- 2.30.2