From c997869f1620b733efd4d6ef344deb0377566510 Mon Sep 17 00:00:00 2001 From: Segher Boessenkool Date: Wed, 12 Oct 2016 17:32:23 +0200 Subject: [PATCH] shrink-wrap: Shrink-wrapping for separate components This is the main substance of this patch series. Instead of doing all of the prologue and epilogue in one spot, it often is better to do components of it at different places, so that they are executed less frequently. What exactly is a component is completely up to the target; this code treats it all abstractly, and uses hooks for the target to handle the more concrete things. Commonly there is one component for each callee- saved register, for example. Components can be executed more than once per function execution. This pass makes sure that a component's epilogue is not called more often than the corresponding prologue has been, at any point in time; that the prologue is called more often, wherever the prologue's effect is needed; and that the epilogue is called as often as the prologue has been, when the function exits. It does this by first deciding which blocks need which components active, and then placing prologue and epilogue components to make that exactly true. Deciding what blocks should run with a certain component active so that the total cost of executing the prologues (and epilogues) is optimal, is not a computationally feasible problem. Instead, for each basic block, we estimate the cost of putting a prologue right before the block, and if that is cheaper than the total cost of putting prologues optimally (according to the estimated cost) in the dominator subtrees strictly dominated by this first block, place it at the first block instead. This simple procedure places the components optimally for any dominator sub tree where the root node's cost does not depend on anything outside its subtree. The cost is the execution frequency of all edges into the block coming from blocks that do not have this component active. The estimated cost is the execution frequency of the block, minus the execution frequency of any backedges (which by definition are coming from subtrees, so if the "head" block gets a prologue, the source block of any backedge has that component active as well). Currently, the epilogues are placed as late as possible, given the constraints. This does not matter for execution cost, but we could save a little bit of code size by placing the epilogues in a smarter way. This is a possible future optimisation. Now all that is left is inserting prologues and epilogues on all edges that jump into resp. out of the "active" set of blocks. Often we need to insert some components' prologues (or epilogues) on all edges into (or out of) a block. In theory cross-jumping can unify all such, but in practice that often fails; besides, that is a lot of work. So in this case we insert the prologue and epilogue components at the "head" or "tail" of a block, instead. As a final optimisation, if a block needs a prologue and its immediate dominator has the block as a post-dominator, that immediate dominator gets the prologue as well. * function.c (thread_prologue_and_epilogue_insns): Call try_shrink_wrapping_separate. Compute the prologue_seq afterwards, if it has possibly changed. Compute the split_prologue_seq and epilogue_seq later, too. * shrink-wrap.c: #include cfgbuild.h and insn-config.h. (dump_components): New function. (struct sw): New struct. (SW): New function. (init_separate_shrink_wrap): New function. (fini_separate_shrink_wrap): New function. (place_prologue_for_one_component): New function. (spread_components): New function. (disqualify_problematic_components): New function. (emit_common_heads_for_components): New function. (emit_common_tails_for_components): New function. (insert_prologue_epilogue_for_components): New function. (try_shrink_wrapping_separate): New function. * shrink-wrap.h: Declare try_shrink_wrapping_separate. From-SVN: r241063 --- gcc/ChangeLog | 21 ++ gcc/function.c | 15 +- gcc/shrink-wrap.c | 741 ++++++++++++++++++++++++++++++++++++++++++++++ gcc/shrink-wrap.h | 1 + 4 files changed, 775 insertions(+), 3 deletions(-) diff --git a/gcc/ChangeLog b/gcc/ChangeLog index 9b66e887787..ca20d79b5ef 100644 --- a/gcc/ChangeLog +++ b/gcc/ChangeLog @@ -1,3 +1,24 @@ +2016-10-12 Segher Boessenkool + + * function.c (thread_prologue_and_epilogue_insns): Call + try_shrink_wrapping_separate. Compute the prologue_seq afterwards, + if it has possibly changed. Compute the split_prologue_seq and + epilogue_seq later, too. + * shrink-wrap.c: #include cfgbuild.h and insn-config.h. + (dump_components): New function. + (struct sw): New struct. + (SW): New function. + (init_separate_shrink_wrap): New function. + (fini_separate_shrink_wrap): New function. + (place_prologue_for_one_component): New function. + (spread_components): New function. + (disqualify_problematic_components): New function. + (emit_common_heads_for_components): New function. + (emit_common_tails_for_components): New function. + (insert_prologue_epilogue_for_components): New function. + (try_shrink_wrapping_separate): New function. + * shrink-wrap.h: Declare try_shrink_wrapping_separate. + 2016-10-12 Segher Boessenkool * regrename.c (build_def_use): Invalidate chains that have a diff --git a/gcc/function.c b/gcc/function.c index cdd2721cdf9..5dafb8ce35b 100644 --- a/gcc/function.c +++ b/gcc/function.c @@ -5919,16 +5919,25 @@ thread_prologue_and_epilogue_insns (void) edge entry_edge = single_succ_edge (ENTRY_BLOCK_PTR_FOR_FN (cfun)); edge orig_entry_edge = entry_edge; - rtx_insn *split_prologue_seq = make_split_prologue_seq (); rtx_insn *prologue_seq = make_prologue_seq (); - rtx_insn *epilogue_seq = make_epilogue_seq (); /* Try to perform a kind of shrink-wrapping, making sure the prologue/epilogue is emitted only around those parts of the function that require it. */ - try_shrink_wrapping (&entry_edge, prologue_seq); + /* If the target can handle splitting the prologue/epilogue into separate + components, try to shrink-wrap these components separately. */ + try_shrink_wrapping_separate (entry_edge->dest); + + /* If that did anything for any component we now need the generate the + "main" prologue again. If that does not work for some target then + that target should not enable separate shrink-wrapping. */ + if (crtl->shrink_wrapped_separate) + prologue_seq = make_prologue_seq (); + + rtx_insn *split_prologue_seq = make_split_prologue_seq (); + rtx_insn *epilogue_seq = make_epilogue_seq (); rtl_profile_for_bb (EXIT_BLOCK_PTR_FOR_FN (cfun)); diff --git a/gcc/shrink-wrap.c b/gcc/shrink-wrap.c index b85b1c3b349..7285775e5e0 100644 --- a/gcc/shrink-wrap.c +++ b/gcc/shrink-wrap.c @@ -30,10 +30,12 @@ along with GCC; see the file COPYING3. If not see #include "df.h" #include "tm_p.h" #include "regs.h" +#include "insn-config.h" #include "emit-rtl.h" #include "output.h" #include "tree-pass.h" #include "cfgrtl.h" +#include "cfgbuild.h" #include "params.h" #include "bb-reorder.h" #include "shrink-wrap.h" @@ -1006,3 +1008,742 @@ try_shrink_wrapping (edge *entry_edge, rtx_insn *prologue_seq) BITMAP_FREE (bb_with); free_dominance_info (CDI_DOMINATORS); } + +/* Separate shrink-wrapping + + Instead of putting all of the prologue and epilogue in one spot, we + can put parts of it in places where those components are executed less + frequently. The following code does this, for prologue and epilogue + components that can be put in more than one location, and where those + components can be executed more than once (the epilogue component will + always be executed before the prologue component is executed a second + time). + + What exactly is a component is target-dependent. The more usual + components are simple saves/restores to/from the frame of callee-saved + registers. This code treats components abstractly (as an sbitmap), + letting the target handle all details. + + Prologue components are placed in such a way that for every component + the prologue is executed as infrequently as possible. We do this by + walking the dominator tree, comparing the cost of placing a prologue + component before a block to the sum of costs determined for all subtrees + of that block. + + From this placement, we then determine for each component all blocks + where at least one of this block's dominators (including itself) will + get a prologue inserted. That then is how the components are placed. + We could place the epilogue components a bit smarter (we can save a + bit of code size sometimes); this is a possible future improvement. + + Prologues and epilogues are preferably placed into a block, either at + the beginning or end of it, if it is needed for all predecessor resp. + successor edges; or placed on the edge otherwise. + + If the placement of any prologue/epilogue leads to a situation we cannot + handle (for example, an abnormal edge would need to be split, or some + targets want to use some specific registers that may not be available + where we want to put them), separate shrink-wrapping for the components + in that prologue/epilogue is aborted. */ + + +/* Print the sbitmap COMPONENTS to the DUMP_FILE if not empty, with the + label LABEL. */ +static void +dump_components (const char *label, sbitmap components) +{ + if (bitmap_empty_p (components)) + return; + + fprintf (dump_file, " [%s", label); + + for (unsigned int j = 0; j < components->n_bits; j++) + if (bitmap_bit_p (components, j)) + fprintf (dump_file, " %u", j); + + fprintf (dump_file, "]"); +} + +/* The data we collect for each bb. */ +struct sw { + /* What components does this BB need? */ + sbitmap needs_components; + + /* What components does this BB have? This is the main decision this + pass makes. */ + sbitmap has_components; + + /* The components for which we placed code at the start of the BB (instead + of on all incoming edges). */ + sbitmap head_components; + + /* The components for which we placed code at the end of the BB (instead + of on all outgoing edges). */ + sbitmap tail_components; + + /* The frequency of executing the prologue for this BB, if a prologue is + placed on this BB. This is a pessimistic estimate (no prologue is + needed for edges from blocks that have the component under consideration + active already). */ + gcov_type own_cost; + + /* The frequency of executing the prologue for this BB and all BBs + dominated by it. */ + gcov_type total_cost; +}; + +/* A helper function for accessing the pass-specific info. */ +static inline struct sw * +SW (basic_block bb) +{ + gcc_assert (bb->aux); + return (struct sw *) bb->aux; +} + +/* Create the pass-specific data structures for separately shrink-wrapping + with components COMPONENTS. */ +static void +init_separate_shrink_wrap (sbitmap components) +{ + basic_block bb; + FOR_ALL_BB_FN (bb, cfun) + { + bb->aux = xcalloc (1, sizeof (struct sw)); + + SW (bb)->needs_components = targetm.shrink_wrap.components_for_bb (bb); + + /* Mark all basic blocks without successor as needing all components. + This avoids problems in at least cfgcleanup, sel-sched, and + regrename (largely to do with all paths to such a block still + needing the same dwarf CFI info). */ + if (EDGE_COUNT (bb->succs) == 0) + bitmap_copy (SW (bb)->needs_components, components); + + if (dump_file) + { + fprintf (dump_file, "bb %d components:", bb->index); + dump_components ("has", SW (bb)->needs_components); + fprintf (dump_file, "\n"); + } + + SW (bb)->has_components = sbitmap_alloc (SBITMAP_SIZE (components)); + SW (bb)->head_components = sbitmap_alloc (SBITMAP_SIZE (components)); + SW (bb)->tail_components = sbitmap_alloc (SBITMAP_SIZE (components)); + bitmap_clear (SW (bb)->has_components); + bitmap_clear (SW (bb)->head_components); + bitmap_clear (SW (bb)->tail_components); + } +} + +/* Destroy the pass-specific data. */ +static void +fini_separate_shrink_wrap (void) +{ + basic_block bb; + FOR_ALL_BB_FN (bb, cfun) + if (bb->aux) + { + sbitmap_free (SW (bb)->needs_components); + sbitmap_free (SW (bb)->has_components); + sbitmap_free (SW (bb)->head_components); + sbitmap_free (SW (bb)->tail_components); + free (bb->aux); + bb->aux = 0; + } +} + +/* Place the prologue for component WHICH, in the basic blocks dominated + by HEAD. Do a DFS over the dominator tree, and set bit WHICH in the + HAS_COMPONENTS of a block if either the block has that bit set in + NEEDS_COMPONENTS, or it is cheaper to place the prologue here than in all + dominator subtrees separately. */ +static void +place_prologue_for_one_component (unsigned int which, basic_block head) +{ + /* The block we are currently dealing with. */ + basic_block bb = head; + /* Is this the first time we visit this block, i.e. have we just gone + down the tree. */ + bool first_visit = true; + + /* Walk the dominator tree, visit one block per iteration of this loop. + Each basic block is visited twice: once before visiting any children + of the block, and once after visiting all of them (leaf nodes are + visited only once). As an optimization, we do not visit subtrees + that can no longer influence the prologue placement. */ + for (;;) + { + /* First visit of a block: set the (children) cost accumulator to zero; + if the block does not have the component itself, walk down. */ + if (first_visit) + { + /* Initialize the cost. The cost is the block execution frequency + that does not come from backedges. Calculating this by simply + adding the cost of all edges that aren't backedges does not + work: this does not always add up to the block frequency at + all, and even if it does, rounding error makes for bad + decisions. */ + SW (bb)->own_cost = bb->frequency; + + edge e; + edge_iterator ei; + FOR_EACH_EDGE (e, ei, bb->preds) + if (dominated_by_p (CDI_DOMINATORS, e->src, bb)) + { + if (SW (bb)->own_cost > EDGE_FREQUENCY (e)) + SW (bb)->own_cost -= EDGE_FREQUENCY (e); + else + SW (bb)->own_cost = 0; + } + + SW (bb)->total_cost = 0; + + if (!bitmap_bit_p (SW (bb)->needs_components, which) + && first_dom_son (CDI_DOMINATORS, bb)) + { + bb = first_dom_son (CDI_DOMINATORS, bb); + continue; + } + } + + /* If this block does need the component itself, or it is cheaper to + put the prologue here than in all the descendants that need it, + mark it so. If this block's immediate post-dominator is dominated + by this block, and that needs the prologue, we can put it on this + block as well (earlier is better). */ + if (bitmap_bit_p (SW (bb)->needs_components, which) + || SW (bb)->total_cost > SW (bb)->own_cost) + { + SW (bb)->total_cost = SW (bb)->own_cost; + bitmap_set_bit (SW (bb)->has_components, which); + } + else + { + basic_block kid = get_immediate_dominator (CDI_POST_DOMINATORS, bb); + if (dominated_by_p (CDI_DOMINATORS, kid, bb) + && bitmap_bit_p (SW (kid)->has_components, which)) + { + SW (bb)->total_cost = SW (bb)->own_cost; + bitmap_set_bit (SW (bb)->has_components, which); + } + } + + /* We are back where we started, so we are done now. */ + if (bb == head) + return; + + /* We now know the cost of the subtree rooted at the current block. + Accumulate this cost in the parent. */ + basic_block parent = get_immediate_dominator (CDI_DOMINATORS, bb); + SW (parent)->total_cost += SW (bb)->total_cost; + + /* Don't walk the tree down unless necessary. */ + if (next_dom_son (CDI_DOMINATORS, bb) + && SW (parent)->total_cost <= SW (parent)->own_cost) + { + bb = next_dom_son (CDI_DOMINATORS, bb); + first_visit = true; + } + else + { + bb = parent; + first_visit = false; + } + } +} + +/* Mark HAS_COMPONENTS for every block dominated by at least one block with + HAS_COMPONENTS set for the respective components, starting at HEAD. */ +static void +spread_components (basic_block head) +{ + basic_block bb = head; + bool first_visit = true; + /* This keeps a tally of all components active. */ + sbitmap components = SW (head)->has_components; + + for (;;) + { + if (first_visit) + { + bitmap_ior (SW (bb)->has_components, SW (bb)->has_components, + components); + + if (first_dom_son (CDI_DOMINATORS, bb)) + { + components = SW (bb)->has_components; + bb = first_dom_son (CDI_DOMINATORS, bb); + continue; + } + } + + components = SW (bb)->has_components; + + if (next_dom_son (CDI_DOMINATORS, bb)) + { + bb = next_dom_son (CDI_DOMINATORS, bb); + basic_block parent = get_immediate_dominator (CDI_DOMINATORS, bb); + components = SW (parent)->has_components; + first_visit = true; + } + else + { + if (bb == head) + return; + bb = get_immediate_dominator (CDI_DOMINATORS, bb); + first_visit = false; + } + } +} + +/* If we cannot handle placing some component's prologues or epilogues where + we decided we should place them, unmark that component in COMPONENTS so + that it is not wrapped separately. */ +static void +disqualify_problematic_components (sbitmap components) +{ + sbitmap pro = sbitmap_alloc (SBITMAP_SIZE (components)); + sbitmap epi = sbitmap_alloc (SBITMAP_SIZE (components)); + + basic_block bb; + FOR_EACH_BB_FN (bb, cfun) + { + edge e; + edge_iterator ei; + FOR_EACH_EDGE (e, ei, bb->succs) + { + /* Find which components we want pro/epilogues for here. */ + bitmap_and_compl (epi, SW (e->src)->has_components, + SW (e->dest)->has_components); + bitmap_and_compl (pro, SW (e->dest)->has_components, + SW (e->src)->has_components); + + /* Ask the target what it thinks about things. */ + if (!bitmap_empty_p (epi)) + targetm.shrink_wrap.disqualify_components (components, e, epi, + false); + if (!bitmap_empty_p (pro)) + targetm.shrink_wrap.disqualify_components (components, e, pro, + true); + + /* If this edge doesn't need splitting, we're fine. */ + if (single_pred_p (e->dest) + && e->dest != EXIT_BLOCK_PTR_FOR_FN (cfun)) + continue; + + /* If the edge can be split, that is fine too. */ + if ((e->flags & EDGE_ABNORMAL) == 0) + continue; + + /* We also can handle sibcalls. */ + if (e->dest == EXIT_BLOCK_PTR_FOR_FN (cfun)) + { + gcc_assert (e->flags & EDGE_SIBCALL); + continue; + } + + /* Remove from consideration those components we would need + pro/epilogues for on edges where we cannot insert them. */ + bitmap_and_compl (components, components, epi); + bitmap_and_compl (components, components, pro); + + if (dump_file && !bitmap_subset_p (epi, components)) + { + fprintf (dump_file, " BAD epi %d->%d", e->src->index, + e->dest->index); + if (e->flags & EDGE_EH) + fprintf (dump_file, " for EH"); + dump_components ("epi", epi); + fprintf (dump_file, "\n"); + } + + if (dump_file && !bitmap_subset_p (pro, components)) + { + fprintf (dump_file, " BAD pro %d->%d", e->src->index, + e->dest->index); + if (e->flags & EDGE_EH) + fprintf (dump_file, " for EH"); + dump_components ("pro", pro); + fprintf (dump_file, "\n"); + } + } + } + + sbitmap_free (pro); + sbitmap_free (epi); +} + +/* Place code for prologues and epilogues for COMPONENTS where we can put + that code at the start of basic blocks. */ +static void +emit_common_heads_for_components (sbitmap components) +{ + sbitmap pro = sbitmap_alloc (SBITMAP_SIZE (components)); + sbitmap epi = sbitmap_alloc (SBITMAP_SIZE (components)); + sbitmap tmp = sbitmap_alloc (SBITMAP_SIZE (components)); + + basic_block bb; + FOR_EACH_BB_FN (bb, cfun) + { + /* Find which prologue resp. epilogue components are needed for all + predecessor edges to this block. */ + + /* First, select all possible components. */ + bitmap_copy (epi, components); + bitmap_copy (pro, components); + + edge e; + edge_iterator ei; + FOR_EACH_EDGE (e, ei, bb->preds) + { + if (e->flags & EDGE_ABNORMAL) + { + bitmap_clear (epi); + bitmap_clear (pro); + break; + } + + /* Deselect those epilogue components that should not be inserted + for this edge. */ + bitmap_and_compl (tmp, SW (e->src)->has_components, + SW (e->dest)->has_components); + bitmap_and (epi, epi, tmp); + + /* Similar, for the prologue. */ + bitmap_and_compl (tmp, SW (e->dest)->has_components, + SW (e->src)->has_components); + bitmap_and (pro, pro, tmp); + } + + if (dump_file && !(bitmap_empty_p (epi) && bitmap_empty_p (pro))) + fprintf (dump_file, " bb %d", bb->index); + + if (dump_file && !bitmap_empty_p (epi)) + dump_components ("epi", epi); + if (dump_file && !bitmap_empty_p (pro)) + dump_components ("pro", pro); + + if (dump_file && !(bitmap_empty_p (epi) && bitmap_empty_p (pro))) + fprintf (dump_file, "\n"); + + /* Place code after the BB note. */ + if (!bitmap_empty_p (pro)) + { + start_sequence (); + targetm.shrink_wrap.emit_prologue_components (pro); + rtx_insn *seq = get_insns (); + end_sequence (); + + emit_insn_after (seq, bb_note (bb)); + + bitmap_ior (SW (bb)->head_components, SW (bb)->head_components, pro); + } + + if (!bitmap_empty_p (epi)) + { + start_sequence (); + targetm.shrink_wrap.emit_epilogue_components (epi); + rtx_insn *seq = get_insns (); + end_sequence (); + + emit_insn_after (seq, bb_note (bb)); + + bitmap_ior (SW (bb)->head_components, SW (bb)->head_components, epi); + } + } + + sbitmap_free (pro); + sbitmap_free (epi); + sbitmap_free (tmp); +} + +/* Place code for prologues and epilogues for COMPONENTS where we can put + that code at the end of basic blocks. */ +static void +emit_common_tails_for_components (sbitmap components) +{ + sbitmap pro = sbitmap_alloc (SBITMAP_SIZE (components)); + sbitmap epi = sbitmap_alloc (SBITMAP_SIZE (components)); + sbitmap tmp = sbitmap_alloc (SBITMAP_SIZE (components)); + + basic_block bb; + FOR_EACH_BB_FN (bb, cfun) + { + /* Find which prologue resp. epilogue components are needed for all + successor edges from this block. */ + if (EDGE_COUNT (bb->succs) == 0) + continue; + + /* First, select all possible components. */ + bitmap_copy (epi, components); + bitmap_copy (pro, components); + + edge e; + edge_iterator ei; + FOR_EACH_EDGE (e, ei, bb->succs) + { + if (e->flags & EDGE_ABNORMAL) + { + bitmap_clear (epi); + bitmap_clear (pro); + break; + } + + /* Deselect those epilogue components that should not be inserted + for this edge, and also those that are already put at the head + of the successor block. */ + bitmap_and_compl (tmp, SW (e->src)->has_components, + SW (e->dest)->has_components); + bitmap_and_compl (tmp, tmp, SW (e->dest)->head_components); + bitmap_and (epi, epi, tmp); + + /* Similarly, for the prologue. */ + bitmap_and_compl (tmp, SW (e->dest)->has_components, + SW (e->src)->has_components); + bitmap_and_compl (tmp, tmp, SW (e->dest)->head_components); + bitmap_and (pro, pro, tmp); + } + + /* If the last insn of this block is a control flow insn we cannot + put anything after it. We can put our code before it instead, + but only if that jump insn is a simple jump. */ + rtx_insn *last_insn = BB_END (bb); + if (control_flow_insn_p (last_insn) && !simplejump_p (last_insn)) + { + bitmap_clear (epi); + bitmap_clear (pro); + } + + if (dump_file && !(bitmap_empty_p (epi) && bitmap_empty_p (pro))) + fprintf (dump_file, " bb %d", bb->index); + + if (dump_file && !bitmap_empty_p (epi)) + dump_components ("epi", epi); + if (dump_file && !bitmap_empty_p (pro)) + dump_components ("pro", pro); + + if (dump_file && !(bitmap_empty_p (epi) && bitmap_empty_p (pro))) + fprintf (dump_file, "\n"); + + /* Put the code at the end of the BB, but before any final jump. */ + if (!bitmap_empty_p (epi)) + { + start_sequence (); + targetm.shrink_wrap.emit_epilogue_components (epi); + rtx_insn *seq = get_insns (); + end_sequence (); + + if (control_flow_insn_p (last_insn)) + emit_insn_before (seq, last_insn); + else + emit_insn_after (seq, last_insn); + + bitmap_ior (SW (bb)->tail_components, SW (bb)->tail_components, epi); + } + + if (!bitmap_empty_p (pro)) + { + start_sequence (); + targetm.shrink_wrap.emit_prologue_components (pro); + rtx_insn *seq = get_insns (); + end_sequence (); + + if (control_flow_insn_p (last_insn)) + emit_insn_before (seq, last_insn); + else + emit_insn_after (seq, last_insn); + + bitmap_ior (SW (bb)->tail_components, SW (bb)->tail_components, pro); + } + } + + sbitmap_free (pro); + sbitmap_free (epi); + sbitmap_free (tmp); +} + +/* Place prologues and epilogues for COMPONENTS on edges, if we haven't already + placed them inside blocks directly. */ +static void +insert_prologue_epilogue_for_components (sbitmap components) +{ + sbitmap pro = sbitmap_alloc (SBITMAP_SIZE (components)); + sbitmap epi = sbitmap_alloc (SBITMAP_SIZE (components)); + + basic_block bb; + FOR_EACH_BB_FN (bb, cfun) + { + if (!bb->aux) + continue; + + edge e; + edge_iterator ei; + FOR_EACH_EDGE (e, ei, bb->succs) + { + /* Find which pro/epilogue components are needed on this edge. */ + bitmap_and_compl (epi, SW (e->src)->has_components, + SW (e->dest)->has_components); + bitmap_and_compl (pro, SW (e->dest)->has_components, + SW (e->src)->has_components); + bitmap_and (epi, epi, components); + bitmap_and (pro, pro, components); + + /* Deselect those we already have put at the head or tail of the + edge's dest resp. src. */ + bitmap_and_compl (epi, epi, SW (e->dest)->head_components); + bitmap_and_compl (pro, pro, SW (e->dest)->head_components); + bitmap_and_compl (epi, epi, SW (e->src)->tail_components); + bitmap_and_compl (pro, pro, SW (e->src)->tail_components); + + if (!bitmap_empty_p (epi) || !bitmap_empty_p (pro)) + { + if (dump_file) + { + fprintf (dump_file, " %d->%d", e->src->index, + e->dest->index); + dump_components ("epi", epi); + dump_components ("pro", pro); + fprintf (dump_file, "\n"); + } + + /* Put the epilogue components in place. */ + start_sequence (); + targetm.shrink_wrap.emit_epilogue_components (epi); + rtx_insn *seq = get_insns (); + end_sequence (); + + if (e->flags & EDGE_SIBCALL) + { + gcc_assert (e->dest == EXIT_BLOCK_PTR_FOR_FN (cfun)); + + rtx_insn *insn = BB_END (e->src); + gcc_assert (CALL_P (insn) && SIBLING_CALL_P (insn)); + emit_insn_before (seq, insn); + } + else if (e->dest == EXIT_BLOCK_PTR_FOR_FN (cfun)) + { + gcc_assert (e->flags & EDGE_FALLTHRU); + basic_block new_bb = split_edge (e); + emit_insn_after (seq, BB_END (new_bb)); + } + else + insert_insn_on_edge (seq, e); + + /* Put the prologue components in place. */ + start_sequence (); + targetm.shrink_wrap.emit_prologue_components (pro); + seq = get_insns (); + end_sequence (); + + insert_insn_on_edge (seq, e); + } + } + } + + sbitmap_free (pro); + sbitmap_free (epi); + + commit_edge_insertions (); +} + +/* The main entry point to this subpass. FIRST_BB is where the prologue + would be normally put. */ +void +try_shrink_wrapping_separate (basic_block first_bb) +{ + if (HAVE_cc0) + return; + + if (!(SHRINK_WRAPPING_ENABLED + && flag_shrink_wrap_separate + && optimize_function_for_speed_p (cfun) + && targetm.shrink_wrap.get_separate_components)) + return; + + /* We don't handle "strange" functions. */ + if (cfun->calls_alloca + || cfun->calls_setjmp + || cfun->can_throw_non_call_exceptions + || crtl->calls_eh_return + || crtl->has_nonlocal_goto + || crtl->saves_all_registers) + return; + + /* Ask the target what components there are. If it returns NULL, don't + do anything. */ + sbitmap components = targetm.shrink_wrap.get_separate_components (); + if (!components) + return; + + /* We need LIVE info. */ + df_live_add_problem (); + df_live_set_all_dirty (); + df_analyze (); + + calculate_dominance_info (CDI_DOMINATORS); + calculate_dominance_info (CDI_POST_DOMINATORS); + + init_separate_shrink_wrap (components); + + sbitmap_iterator sbi; + unsigned int j; + EXECUTE_IF_SET_IN_BITMAP (components, 0, j, sbi) + place_prologue_for_one_component (j, first_bb); + + spread_components (first_bb); + + disqualify_problematic_components (components); + + /* Don't separately shrink-wrap anything where the "main" prologue will + go; the target code can often optimize things if it is presented with + all components together (say, if it generates store-multiple insns). */ + bitmap_and_compl (components, components, SW (first_bb)->has_components); + + if (bitmap_empty_p (components)) + { + if (dump_file) + fprintf (dump_file, "Not wrapping anything separately.\n"); + } + else + { + if (dump_file) + { + fprintf (dump_file, "The components we wrap separately are"); + dump_components ("sep", components); + fprintf (dump_file, "\n"); + + fprintf (dump_file, "... Inserting common heads...\n"); + } + + emit_common_heads_for_components (components); + + if (dump_file) + fprintf (dump_file, "... Inserting common tails...\n"); + + emit_common_tails_for_components (components); + + if (dump_file) + fprintf (dump_file, "... Inserting the more difficult ones...\n"); + + insert_prologue_epilogue_for_components (components); + + if (dump_file) + fprintf (dump_file, "... Done.\n"); + + targetm.shrink_wrap.set_handled_components (components); + + crtl->shrink_wrapped_separate = true; + } + + fini_separate_shrink_wrap (); + + sbitmap_free (components); + free_dominance_info (CDI_DOMINATORS); + free_dominance_info (CDI_POST_DOMINATORS); + + if (crtl->shrink_wrapped_separate) + { + df_live_set_all_dirty (); + df_analyze (); + } +} diff --git a/gcc/shrink-wrap.h b/gcc/shrink-wrap.h index e06ab37952f..05fcb41277a 100644 --- a/gcc/shrink-wrap.h +++ b/gcc/shrink-wrap.h @@ -25,6 +25,7 @@ along with GCC; see the file COPYING3. If not see /* In shrink-wrap.c. */ extern bool requires_stack_frame_p (rtx_insn *, HARD_REG_SET, HARD_REG_SET); extern void try_shrink_wrapping (edge *entry_edge, rtx_insn *prologue_seq); +extern void try_shrink_wrapping_separate (basic_block first_bb); #define SHRINK_WRAPPING_ENABLED \ (flag_shrink_wrap && targetm.have_simple_return ()) -- 2.30.2