From cdbb96e0b189ce7a270979993422b9780a3a6224 Mon Sep 17 00:00:00 2001 From: Jagan Teki Date: Tue, 30 Jan 2018 13:03:53 +0100 Subject: [PATCH] board: Add Vyasa RK3288 board support Add Vyasa board, from rk3288 family SOC. Signed-off-by: Jagan Teki Signed-off-by: Peter Korsgaard --- .gitlab-ci.yml | 1 + DEVELOPERS | 2 ++ board/amarula/vyasa/extlinux.conf | 4 +++ board/amarula/vyasa/genimage.cfg | 21 +++++++++++ board/amarula/vyasa/linux_gmac.fragment | 3 ++ board/amarula/vyasa/post-build.sh | 9 +++++ board/amarula/vyasa/readme.txt | 31 +++++++++++++++++ configs/amarula_vyasa_rk3288_defconfig | 46 +++++++++++++++++++++++++ 8 files changed, 117 insertions(+) create mode 100644 board/amarula/vyasa/extlinux.conf create mode 100644 board/amarula/vyasa/genimage.cfg create mode 100644 board/amarula/vyasa/linux_gmac.fragment create mode 100755 board/amarula/vyasa/post-build.sh create mode 100644 board/amarula/vyasa/readme.txt create mode 100644 configs/amarula_vyasa_rk3288_defconfig diff --git a/.gitlab-ci.yml b/.gitlab-ci.yml index bf975fcd47..18b05a7fc5 100644 --- a/.gitlab-ci.yml +++ b/.gitlab-ci.yml @@ -67,6 +67,7 @@ acmesystems_aria_g25_128mb_defconfig: *defconfig acmesystems_aria_g25_256mb_defconfig: *defconfig acmesystems_arietta_g25_128mb_defconfig: *defconfig acmesystems_arietta_g25_256mb_defconfig: *defconfig +amarula_vyasa_rk3288_defconfig: *defconfig arcturus_ucp1020_defconfig: *defconfig arm_foundationv8_defconfig: *defconfig arm_juno_defconfig: *defconfig diff --git a/DEVELOPERS b/DEVELOPERS index c524cb6ac5..9508172322 100644 --- a/DEVELOPERS +++ b/DEVELOPERS @@ -782,8 +782,10 @@ N: Ismael Luceno F: package/axel/ N: Jagan Teki +F: board/amarula/ F: board/bananapi/ F: board/engicam/ +F: configs/amarula_vyasa_rk3288_defconfig F: board/friendlyarm/nanopi-a64/ F: board/friendlyarm/nanopi-neo2/ F: board/olimex/a64-olinuxino/ diff --git a/board/amarula/vyasa/extlinux.conf b/board/amarula/vyasa/extlinux.conf new file mode 100644 index 0000000000..a8fcc35f5a --- /dev/null +++ b/board/amarula/vyasa/extlinux.conf @@ -0,0 +1,4 @@ +label Vyasa linux-next + kernel /boot/uImage + devicetree /boot/rk3288-vyasa.dtb + append console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait diff --git a/board/amarula/vyasa/genimage.cfg b/board/amarula/vyasa/genimage.cfg new file mode 100644 index 0000000000..fa41de3672 --- /dev/null +++ b/board/amarula/vyasa/genimage.cfg @@ -0,0 +1,21 @@ +image sdcard.img { + hdimage { + } + + partition u-boot-tpl-spl-dtb { + in-partition-table = "no" + image = "u-boot-tpl-spl-dtb.img" + offset = 32K + } + + partition u-boot-dtb { + in-partition-table = "no" + image = "u-boot-dtb.img" + offset = 8M + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext4" + } +} diff --git a/board/amarula/vyasa/linux_gmac.fragment b/board/amarula/vyasa/linux_gmac.fragment new file mode 100644 index 0000000000..8ebf383597 --- /dev/null +++ b/board/amarula/vyasa/linux_gmac.fragment @@ -0,0 +1,3 @@ +# Currently mainline kernel exhibits issues when running rockchip gmac +# on the board, so enable it as loadable module and insert it later +CONFIG_DWMAC_ROCKCHIP=m diff --git a/board/amarula/vyasa/post-build.sh b/board/amarula/vyasa/post-build.sh new file mode 100755 index 0000000000..ffbbcdeb58 --- /dev/null +++ b/board/amarula/vyasa/post-build.sh @@ -0,0 +1,9 @@ +#!/bin/sh + +MKIMAGE=$HOST_DIR/bin/mkimage +BOARD_DIR="$(dirname $0)" + +$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img +cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img + +install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf diff --git a/board/amarula/vyasa/readme.txt b/board/amarula/vyasa/readme.txt new file mode 100644 index 0000000000..b95889e814 --- /dev/null +++ b/board/amarula/vyasa/readme.txt @@ -0,0 +1,31 @@ +Vyasa RK3288 +============ + +Vyasa is RK3288 based Single board computer with fully supported opensource software. + +https://openedev.amarulasolutions.com/display/ODWIKI/Vyasa+RK3288 + +How to build it +=============== + + $ make amarula_vyasa_rk3288_defconfig + +Then you can edit the build options using + + $ make menuconfig + +Compile all and build rootfs image: + + $ make + +Prepare your SDCard +=================== + +Buildroot generates a ready-to-use SD card image that you can flash directly to +the card. The image will be in output/images/sdcard.img. +You can write this image directly to an SD card device (i.e. /dev/xxx): + + $ sudo dd if=output/images/sdcard.img of=/dev/xxx + $ sudo sync + +Finally, you can insert the SD card to the Vyasa RK3288 board, close J4 and boot it. diff --git a/configs/amarula_vyasa_rk3288_defconfig b/configs/amarula_vyasa_rk3288_defconfig new file mode 100644 index 0000000000..a020b353b9 --- /dev/null +++ b/configs/amarula_vyasa_rk3288_defconfig @@ -0,0 +1,46 @@ +# Architecture +BR2_arm=y +BR2_cortex_a17=y +BR2_ARM_FPU_NEON_VFPV4=y + +# Linux headers same as kernel, a 4.14 series +BR2_KERNEL_HEADERS_4_14=y + +# Bootloader +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_VERSION=y +BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2017.11" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="vyasa-rk3288" +BR2_TARGET_UBOOT_NEEDS_DTC=y +BR2_TARGET_UBOOT_NEEDS_OPENSSL=y +BR2_TARGET_UBOOT_FORMAT_DTB_IMG=y +BR2_TARGET_UBOOT_SPL=y +BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl-dtb.bin tpl/u-boot-tpl.bin" + +# Kernel +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/openedev/linux-openedev" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="d127129e85a020879f334154300ddd3f7ec21c1e" +BR2_LINUX_KERNEL_DEFCONFIG="multi_v7" +BR2_LINUX_KERNEL_UIMAGE=y +BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x02000000" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="rk3288-vyasa" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/amarula/vyasa/linux_gmac.fragment" + +# Filesystem +BR2_TARGET_GENERIC_HOSTNAME="vyasa-rk3288" +BR2_TARGET_GENERIC_ISSUE="Welcome to VYASA RK3288!" +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_ROOTFS_EXT2_SIZE="512M" +BR2_PACKAGE_HOST_DOSFSTOOLS=y +BR2_PACKAGE_HOST_GENIMAGE=y +BR2_PACKAGE_HOST_MTOOLS=y +BR2_PACKAGE_HOST_UBOOT_TOOLS=y +BR2_ROOTFS_POST_IMAGE_SCRIPT="support/scripts/genimage.sh" +BR2_ROOTFS_POST_SCRIPT_ARGS="-c board/amarula/vyasa/genimage.cfg" +BR2_ROOTFS_POST_BUILD_SCRIPT="board/amarula/vyasa/post-build.sh" -- 2.30.2