From da1f552dc79476275af282b65c5317ab3b4dbd9a Mon Sep 17 00:00:00 2001 From: "Puputti, Matti" Date: Wed, 26 Jul 2023 12:29:15 +0000 Subject: [PATCH] gdb, infcmd: support jump command in multi-inferior case Fixes the issue where jump failed if multiple inferiors run the same source. See the below example $ gdb -q ./simple Reading symbols from ./simple... (gdb) break 2 Breakpoint 1 at 0x114e: file simple.c, line 2. (gdb) run Starting program: /temp/simple Breakpoint 1, main () at simple.c:2 2 int a = 42; (gdb) add-inferior [New inferior 2] Added inferior 2 on connection 1 (native) (gdb) inferior 2 [Switching to inferior 2 [] ()] (gdb) info inferiors Num Description Connection Executable 1 process 6250 1 (native) /temp/simple * 2 1 (native) (gdb) file ./simple Reading symbols from ./simple... (gdb) run Starting program: /temp/simple Thread 2.1 "simple" hit Breakpoint 1, main () at simple.c:2 2 int a = 42; (gdb) info inferiors Num Description Connection Executable 1 process 6250 1 (native) /temp/simple * 2 process 6705 1 (native) /temp/simple (gdb) jump 3 Unreasonable jump request (gdb) In this example, jump fails because the debugger finds two different locations, one for each inferior. Solution is to limit the search to the current program space. This is done by having the jump_command function use decode_line_with_current_source rather than decode_line_with_last_displayed, which makes sense, the *_current_source function always looks up a location based on the current thread's location -- if a user is asking the current thread to jump, then surely their destination should be relative to where the current thread is located. Then, inside decode_line_with_current_source, the call to decode_line_1 is updated to pass through the current program_space, which will limit the returned locations to those in the current program space. Approved-By: Andrew Burgess --- gdb/infcmd.c | 2 +- gdb/linespec.c | 3 +- gdb/testsuite/gdb.base/jump.exp | 181 +++++++++++++++++--------------- 3 files changed, 98 insertions(+), 88 deletions(-) diff --git a/gdb/infcmd.c b/gdb/infcmd.c index 15702f84894..96c5feafb1a 100644 --- a/gdb/infcmd.c +++ b/gdb/infcmd.c @@ -1068,7 +1068,7 @@ jump_command (const char *arg, int from_tty) error_no_arg (_("starting address")); std::vector sals - = decode_line_with_last_displayed (arg, DECODE_LINE_FUNFIRSTLINE); + = decode_line_with_current_source (arg, DECODE_LINE_FUNFIRSTLINE); if (sals.size () != 1) { /* If multiple sal-objects were found, try dropping those that aren't diff --git a/gdb/linespec.c b/gdb/linespec.c index 7d969f37fbf..afa9eb4d3ac 100644 --- a/gdb/linespec.c +++ b/gdb/linespec.c @@ -3220,7 +3220,8 @@ decode_line_with_current_source (const char *string, int flags) location_spec_up locspec = string_to_location_spec (&string, current_language); std::vector sals - = decode_line_1 (locspec.get (), flags, NULL, cursal.symtab, cursal.line); + = decode_line_1 (locspec.get (), flags, cursal.pspace, cursal.symtab, + cursal.line); if (*string) error (_("Junk at end of line specification: %s"), string); diff --git a/gdb/testsuite/gdb.base/jump.exp b/gdb/testsuite/gdb.base/jump.exp index 032c4a6279d..63eec8ac8d5 100644 --- a/gdb/testsuite/gdb.base/jump.exp +++ b/gdb/testsuite/gdb.base/jump.exp @@ -18,99 +18,108 @@ clear_xfail "*-*-*" standard_testfile .c -# Build the test case -if { [gdb_compile "${srcdir}/${subdir}/${srcfile}" "${binfile}" executable {debug nowarnings}] != "" } { - untested "failed to compile" - return -1 - } - +if {[prepare_for_testing "failed to prepare" $testfile $srcfile]} { + return -1 +} -# Start with a fresh gdb +# General testing of the 'jump' command. GDB is already started. +# There might be multiple inferior in the current debug session, in +# which case, the relevant inferior is already selected. +proc do_tests {} { + # Set a breakpoint on the statement that we're about to jump to. + # The statement doesn't contain a function call. + set non_call_line [gdb_get_line_number "bp-on-non-call"] + gdb_breakpoint "$non_call_line" + set bp_on_non_call \ + [get_integer_valueof "\$bpnum" "INVALID" "bp_on_non_call"] + + # Can we jump to the statement? Do we stop there? + gdb_test "jump $non_call_line" \ + "Breakpoint ${bp_on_non_call}(\.${::decimal})?, .*${::srcfile}:$non_call_line.*" \ + "jump to non-call" + + # Set a breakpoint on the statement that we're about to jump to. + # The statement does contain a function call. + set call_line [gdb_get_line_number "bp-on-call"] + gdb_breakpoint "$call_line" + set bp_on_call [get_integer_valueof "\$bpnum" "INVALID" "bp_on_call"] + + # Can we jump to the statement? Do we stop there? + gdb_test "jump $call_line" \ + "Breakpoint ${bp_on_call}(\.${::decimal})?, .*${::srcfile}:$call_line.*" \ + "jump to call" + + # If we disable the breakpoint at the function call, and then + # if we jump to that statement, do we not stop there, but at + # the following breakpoint? + gdb_test_no_output "disable $bp_on_call" "disable breakpoint on call" + + gdb_test "jump $call_line" \ + "Breakpoint ${bp_on_non_call}(\.${::decimal})?, .*${::srcfile}:$non_call_line.*" \ + "jump to call with disabled breakpoint" + + # Disable the breakpoint at the non-function call, so it won't hit + # if do_test is called again. + gdb_test_no_output "disable ${bp_on_non_call}" "disable bp_on_non_call" + + # Verify that GDB responds gracefully to the "jump" command without + # an argument. + gdb_test "jump" "Argument required .starting address.*" \ + "jump without argument disallowed" + + # Verify that GDB responds gracefully to the "jump" command with + # trailing junk. + gdb_test "jump $call_line 100" \ + "malformed linespec error: unexpected number, \"100\"" \ + "jump with trailing argument junk" + + # Verify that GDB responds gracefully to a request to jump out of + # the current function. (Note that this will very likely cause the + # inferior to die. Be prepared to rerun the inferior, if further + # testing is desired.) + # Try it both ways: confirming and not confirming the jump. + set out_line [gdb_get_line_number "out-of-func"] + gdb_test "jump $out_line" \ + "Not confirmed.*" \ + "aborted jump out of current function" \ + "Line $out_line is not in `main'. Jump anyway.*y or n. $" \ + "n" + + gdb_test "jump $out_line" \ + "Continuing at.*" \ + "jump out of current function" \ + "Line $out_line is not in `main'. Jump anyway.*y or n. $" \ + "y" +} -clean_restart ${binfile} +set num_inferiors 1 +if {![use_gdb_stub]} { + set num_inferiors 2 +} +# Run to main, add inferiors if needed. if {![runto_main]} { - return -1 + return -1 } - -# Set a breakpoint on the statement that we're about to jump to. -# The statement doesn't contain a function call. -# -set bp_on_non_call 0 -set non_call_line [gdb_get_line_number "bp-on-non-call"] -gdb_test_multiple "break $non_call_line" "break before jump to non-call" { - -re "\[Bb\]reakpoint (${decimal}) at ${hex}: file .*${srcfile}, line $non_call_line.*$gdb_prompt $" { - set bp_on_non_call $expect_out(1,string) - pass "break before jump to non-call" +for {set inf 2} {$inf <= $num_inferiors} {incr inf} { + # Start a new inferior, and run it with the same executable. + gdb_test "add-inferior -exec ${binfile}" \ + "Added inferior ${inf}.*" \ + "add inferior ${inf} with -exec " + gdb_test "inferior ${inf}" \ + "Switching to inferior ${inf} .*" \ + "switch to inferior ${inf}" + if {![runto_main]} { + return -1 } } -# Can we jump to the statement? Do we stop there? -# -gdb_test "jump $non_call_line" "Breakpoint ${decimal}, .*${srcfile}:$non_call_line.*" \ - "jump to non-call" - -# Set a breakpoint on the statement that we're about to jump to. -# The statement does contain a function call. -# -set bp_on_call 0 -set call_line [gdb_get_line_number "bp-on-call"] -gdb_test_multiple "break $call_line" "break before jump to call" { - -re "\[Bb\]reakpoint (${decimal}) at ${hex}: file .*${srcfile}, line $call_line.*$gdb_prompt $" { - set bp_on_call $expect_out(1,string) - pass "break before jump to call" +# Run tests on all inferiors. +for {set inf 1} {$inf <= $num_inferiors} {incr inf} { + with_test_prefix "inferior $inf" { + # Switch to the target inferior. + gdb_test "inferior $inf" ".*Switching to inferior $inf .*" + # Run the tests. + do_tests } } - -# Can we jump to the statement? Do we stop there? -# -gdb_test "jump $call_line" \ - "Breakpoint ${decimal}, .*${srcfile}:$call_line.*" \ - "jump to call" - -# If we disable the breakpoint at the function call, and then -# if we jump to that statement, do we not stop there, but at -# the following breakpoint? -# -gdb_test_no_output "disable $bp_on_call" "disable breakpoint on call" - -gdb_test "jump $call_line" "Breakpoint ${decimal}, .*${srcfile}:$non_call_line.*" \ - "jump to call with disabled breakpoint" - -# Verify that GDB responds gracefully to the "jump" command without -# an argument. -# -gdb_test "jump" "Argument required .starting address.*" \ - "jump without argument disallowed" - - -# Verify that GDB responds gracefully to the "jump" command with -# trailing junk. -# -gdb_test "jump $call_line 100" \ - "malformed linespec error: unexpected number, \"100\"" \ - "jump with trailing argument junk" - - -# Verify that GDB responds gracefully to a request to jump out of -# the current function. (Note that this will very likely cause the -# inferior to die. Be prepared to rerun the inferior, if further -# testing is desired.) -# -# Try it both ways: confirming and not confirming the jump. -# - -set out_line [gdb_get_line_number "out-of-func"] -gdb_test "jump $out_line" \ - "Not confirmed.*" \ - "aborted jump out of current function" \ - "Line $out_line is not in `main'. Jump anyway.*y or n. $" \ - "n" - -gdb_test "jump $out_line" \ - "Continuing at.*" \ - "jump out of current function" \ - "Line $out_line is not in `main'. Jump anyway.*y or n. $" \ - "y" - -gdb_exit -- 2.30.2