From df0cd8c5a7c708c07660f29bfd84bc1fd3cab1c8 Mon Sep 17 00:00:00 2001 From: Jim Blandy Date: Fri, 30 Nov 2001 23:03:09 +0000 Subject: [PATCH] * gdb.texinfo (Overlays): New chapter, documenting GDB's overlay support. Add to top-level menu. --- gdb/doc/ChangeLog | 5 + gdb/doc/gdb.texinfo | 382 ++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 387 insertions(+) diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog index f296878636c..f11965d8134 100644 --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,3 +1,8 @@ +2001-11-30 Jim Blandy + + * gdb.texinfo (Overlays): New chapter, documenting GDB's + overlay support. Add to top-level menu. + 2001-11-26 Tom Tromey * gdb.texinfo (Command Syntax): Document C-o binding. diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index b798104332d..347b0dbfda5 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -127,6 +127,7 @@ Copyright (C) 1988-2001 Free Software Foundation, Inc. * Source:: Examining source files * Data:: Examining data * Tracepoints:: Debugging remote targets non-intrusively +* Overlays:: Debugging programs that use overlays * Languages:: Using @value{GDBN} with different languages @@ -179,6 +180,7 @@ Copyright (C) 1988-2000 Free Software Foundation, Inc. * Source:: Examining source files * Data:: Examining data * Tracepoints:: Debugging remote targets non-intrusively +* Overlays:: Debugging programs that use overlays * Languages:: Using @value{GDBN} with different languages @@ -6301,6 +6303,386 @@ data. > end @end smallexample +@node Overlays +@chapter Debugging Programs That Use Overlays +@cindex overlays + +If your program is too large to fit completely in your target system's +memory, you can sometimes use @dfn{overlays} to work around this +problem. @value{GDBN} provides some support for debugging programs that +use overlays. + +@menu +* How Overlays Work:: A general explanation of overlays. +* Overlay Commands:: Managing overlays in @value{GDBN}. +* Automatic Overlay Debugging:: @value{GDBN} can find out which overlays are + mapped by asking the inferior. +* Overlay Sample Program:: A sample program using overlays. +@end menu + +@node How Overlays Work +@section How Overlays Work +@cindex mapped overlays +@cindex unmapped overlays +@cindex load address, overlay's +@cindex mapped address +@cindex overlay area + +Suppose you have a computer whose instruction address space is only 64 +kilobytes long, but which has much more memory which can be accessed by +other means: special instructions, segment registers, or memory +management hardware, for example. Suppose further that you want to +adapt a program which is larger than 64 kilobytes to run on this system. + +One solution is to identify modules of your program which are relatively +independent, and need not call each other directly; call these modules +@dfn{overlays}. Separate the overlays from the main program, and place +their machine code in the larger memory. Place your main program in +instruction memory, but leave at least enough space there to hold the +largest overlay as well. + +Now, to call a function located in an overlay, you must first copy that +overlay's machine code from the large memory into the space set aside +for it in the instruction memory, and then jump to its entry point +there. + +@example +@group + Data Instruction Larger +Address Space Address Space Address Space ++-----------+ +-----------+ +-----------+ +| | | | | | ++-----------+ +-----------+ +-----------+<-- overlay 1 +| program | | main | | | load address +| variables | | program | | overlay 1 | +| and heap | | | ,---| | ++-----------+ | | | | | +| | +-----------+ | +-----------+ ++-----------+ | | | | | + mapped --->+-----------+ / +-----------+<-- overlay 2 + address | overlay | <-' | overlay 2 | load address + | area | <-----| | + | | <---. +-----------+ + | | | | | + +-----------+ | | | + | | | +-----------+<-- overlay 3 + +-----------+ `--| | load address + | overlay 3 | + | | + +-----------+ + | | + +-----------+ + + To map an overlay, copy its code from the larger address space + to the instruction address space. Since the overlays shown here + all use the same mapped address, only one may be mapped at a time. +@end group +@end example + +This diagram shows a system with separate data and instruction address +spaces. For a system with a single address space for data and +instructions, the diagram would be similar, except that the program +variables and heap would share an address space with the main program +and the overlay area. + +An overlay loaded into instruction memory and ready for use is called a +@dfn{mapped} overlay; its @dfn{mapped address} is its address in the +instruction memory. An overlay not present (or only partially present) +in instruction memory is called @dfn{unmapped}; its @dfn{load address} +is its address in the larger memory. The mapped address is also called +the @dfn{virtual memory address}, or @dfn{VMA}; the load address is also +called the @dfn{load memory address}, or @dfn{LMA}. + +Unfortunately, overlays are not a completely transparent way to adapt a +program to limited instruction memory. They introduce a new set of +global constraints you must keep in mind as you design your program: + +@itemize @bullet + +@item +Before calling or returning to a function in an overlay, your program +must make sure that overlay is actually mapped. Otherwise, the call or +return will transfer control to the right address, but in the wrong +overlay, and your program will probably crash. + +@item +If the process of mapping an overlay is expensive on your system, you +will need to choose your overlays carefully to minimize their effect on +your program's performance. + +@item +The executable file you load onto your system must contain each +overlay's instructions, appearing at the overlay's load address, not its +mapped address. However, each overlay's instructions must be relocated +and its symbols defined as if the overlay were at its mapped address. +You can use GNU linker scripts to specify different load and relocation +addresses for pieces of your program; see @ref{Overlay Description,,, +ld.info, Using ld: the GNU linker}. + +@item +The procedure for loading executable files onto your system must be able +to load their contents into the larger address space as well as the +instruction and data spaces. + +@end itemize + +The overlay system described above is rather simple, and could be +improved in many ways: + +@itemize @bullet + +@item +If your system has suitable bank switch registers or memory management +hardware, you could use those facilities to make an overlay's load area +contents simply appear at their mapped address in instruction space. +This would probably be faster than copying the overlay to its mapped +area in the usual way. + +@item +If your overlays are small enough, you could set aside more than one +overlay area, and have more than one overlay mapped at a time. + +@item +You can use overlays to manage data, as well as instructions. In +general, data overlays are even less transparent to your design than +code overlays: whereas code overlays only require care when you call or +return to functions, data overlays require care every time you access +the data. Also, if you change the contents of a data overlay, you +must copy its contents back out to its load address before you can copy a +different data overlay into the same mapped area. + +@end itemize + + +@node Overlay Commands +@section Overlay Commands + +To use @value{GDBN}'s overlay support, each overlay in your program must +correspond to a separate section of the executable file. The section's +virtual memory address and load memory address must be the overlay's +mapped and load addresses. Identifying overlays with sections allows +@value{GDBN} to determine the appropriate address of a function or +variable, depending on whether the overlay is mapped or not. + +@value{GDBN}'s overlay commands all start with the word @code{overlay}; +you can abbreviate this as @code{ov} or @code{ovly}. The commands are: + +@table @code +@item overlay off +@kindex overlay off +Disable @value{GDBN}'s overlay support. When overlay support is +disabled, @value{GDBN} assumes that all functions and variables are +always present at their mapped addresses. By default, @value{GDBN}'s +overlay support is disabled. + +@item overlay manual +@kindex overlay manual +@cindex manual overlay debugging +Enable @dfn{manual} overlay debugging. In this mode, @value{GDBN} +relies on you to tell it which overlays are mapped, and which are not, +using the @code{overlay map-overlay} and @code{overlay unmap-overlay} +commands described below. + +@item overlay map-overlay @var{overlay} +@itemx overlay map @var{overlay} +@kindex overlay map-overlay +@cindex map an overlay +Tell @value{GDBN} that @var{overlay} is now mapped; @var{overlay} must +be the name of the object file section containing the overlay. When an +overlay is mapped, @value{GDBN} assumes it can find the overlay's +functions and variables at their mapped addresses. @value{GDBN} assumes +that any other overlays whose mapped ranges overlap that of +@var{overlay} are now unmapped. + +@item overlay unmap-overlay @var{overlay} +@itemx overlay unmap @var{overlay} +@kindex overlay unmap-overlay +@cindex unmap an overlay +Tell @value{GDBN} that @var{overlay} is no longer mapped; @var{overlay} +must be the name of the object file section containing the overlay. +When an overlay is unmapped, @value{GDBN} assumes it can find the +overlay's functions and variables at their load addresses. + +@item overlay auto +@kindex overlay auto +Enable @dfn{automatic} overlay debugging. In this mode, @value{GDBN} +consults a data structure the overlay manager maintains in the inferior +to see which overlays are mapped. For details, see @ref{Automatic +Overlay Debugging}. + +@item overlay load-target +@itemx overlay load +@kindex overlay load-target +@cindex reloading the overlay table +Re-read the overlay table from the inferior. Normally, @value{GDBN} +re-reads the table @value{GDBN} automatically each time the inferior +stops, so this command should only be necessary if you have changed the +overlay mapping yourself using @value{GDBN}. This command is only +useful when using automatic overlay debugging. + +@item overlay list-overlays +@itemx overlay list +@cindex listing mapped overlays +Display a list of the overlays currently mapped, along with their mapped +addresses, load addresses, and sizes. + +@end table + +Normally, when @value{GDBN} prints a code address, it includes the name +of the function the address falls in: + +@example +(gdb) print main +$3 = @{int ()@} 0x11a0
+@end example +@noindent +When overlay debugging is enabled, @value{GDBN} recognizes code in +unmapped overlays, and prints the names of unmapped functions with +asterisks around them. For example, if @code{foo} is a function in an +unmapped overlay, @value{GDBN} prints it this way: + +@example +(gdb) overlay list +No sections are mapped. +(gdb) print foo +$5 = @{int (int)@} 0x100000 <*foo*> +@end example +@noindent +When @code{foo}'s overlay is mapped, @value{GDBN} prints the function's +name normally: + +@example +(gdb) overlay list +Section .ov.foo.text, loaded at 0x100000 - 0x100034, + mapped at 0x1016 - 0x104a +(gdb) print foo +$6 = @{int (int)@} 0x1016 +@end example + +When overlay debugging is enabled, @value{GDBN} can find the correct +address for functions and variables in an overlay, whether or not the +overlay is mapped. This allows most @value{GDBN} commands, like +@code{break} and @code{disassemble}, to work normally, even on unmapped +code. However, @value{GDBN}'s breakpoint support has some limitations: + +@itemize @bullet +@item +@cindex breakpoints in overlays +@cindex overlays, setting breakpoints in +You can set breakpoints in functions in unmapped overlays, as long as +@value{GDBN} can write to the overlay at its load address. +@item +@value{GDBN} can not set hardware or simulator-based breakpoints in +unmapped overlays. However, if you set a breakpoint at the end of your +overlay manager (and tell @value{GDBN} which overlays are now mapped, if +you are using manual overlay management), @value{GDBN} will re-set its +breakpoints properly. +@end itemize + + +@node Automatic Overlay Debugging +@section Automatic Overlay Debugging +@cindex automatic overlay debugging + +@value{GDBN} can automatically track which overlays are mapped and which +are not, given some simple co-operation from the overlay manager in the +inferior. If you enable automatic overlay debugging with the +@code{overlay auto} command (@pxref{Overlay Commands}), @value{GDBN} +looks in the inferior's memory for certain variables describing the +current state of the overlays. + +Here are the variables your overlay manager must define to support +@value{GDBN}'s automatic overlay debugging: + +@table @asis + +@item @code{_ovly_table}: +This variable must be an array of the following structures: + +@example +struct +@{ + /* The overlay's mapped address. */ + unsigned long vma; + + /* The size of the overlay, in bytes. */ + unsigned long size; + + /* The overlay's load address. */ + unsigned long lma; + + /* Non-zero if the overlay is currently mapped; + zero otherwise. */ + unsigned long mapped; +@} +@end example + +@item @code{_novlys}: +This variable must be a four-byte signed integer, holding the total +number of elements in @code{_ovly_table}. + +@end table + +To decide whether a particular overlay is mapped or not, @value{GDBN} +looks for an entry in @w{@code{_ovly_table}} whose @code{vma} and +@code{lma} members equal the VMA and LMA of the overlay's section in the +executable file. When @value{GDBN} finds a matching entry, it consults +the entry's @code{mapped} member to determine whether the overlay is +currently mapped. + + +@node Overlay Sample Program +@section Overlay Sample Program +@cindex overlay example program + +When linking a program which uses overlays, you must place the overlays +at their load addresses, while relocating them to run at their mapped +addresses. To do this, you must write a linker script (@pxref{Overlay +Description,,, ld.info, Using ld: the GNU linker}). Unfortunately, +since linker scripts are specific to a particular host system, target +architecture, and target memory layout, this manual cannot provide +portable sample code demonstrating @value{GDBN}'s overlay support. + +However, the @value{GDBN} source distribution does contain an overlaid +program, with linker scripts for a few systems, as part of its test +suite. The program consists of the following files from +@file{gdb/testsuite/gdb.base}: + +@table @file +@item overlays.c +The main program file. +@item ovlymgr.c +A simple overlay manager, used by @file{overlays.c}. +@item foo.c +@itemx bar.c +@itemx baz.c +@itemx grbx.c +Overlay modules, loaded and used by @file{overlays.c}. +@item d10v.ld +@itemx m32r.ld +Linker scripts for linking the test program on the @code{d10v-elf} +and @code{m32r-elf} targets. +@end table + +You can build the test program using the @code{d10v-elf} GCC +cross-compiler like this: + +@example +$ d10v-elf-gcc -g -c overlays.c +$ d10v-elf-gcc -g -c ovlymgr.c +$ d10v-elf-gcc -g -c foo.c +$ d10v-elf-gcc -g -c bar.c +$ d10v-elf-gcc -g -c baz.c +$ d10v-elf-gcc -g -c grbx.c +$ d10v-elf-gcc -g overlays.o ovlymgr.o foo.o bar.o \ + baz.o grbx.o -Wl,-Td10v.ld -o overlays +@end example + +The build process is identical for any other architecture, except that +you must substitute the appropriate compiler and linker script for the +target system for @code{d10v-elf-gcc} and @code{d10v.ld}. + + @node Languages @chapter Using @value{GDBN} with Different Languages @cindex languages -- 2.30.2