From df0da8a2b80315485330c03c18b704b8d7b3e9c2 Mon Sep 17 00:00:00 2001 From: Alan Hayward Date: Thu, 7 Feb 2019 14:36:34 +0000 Subject: [PATCH] gdbserver: When attaching, add process before lwps The recent BP/WP changes for AArch64 swapping the order in add_lwp() so that the process was added before the lwp. This was due to the lwp creation requiring the process data. This also needs changing in linux_attach(). Also add additional checks to make sure cannot attach to the same process twice. Add test case for this - do this by splitting attach.exp into distinct pass and error case sections. Fixes gdb.server/ext-attach.exp on Aarch64. gdb/gdbserver/ChangeLog: * linux-low.c (linux_attach): Add process before lwp. * server.c (attach_inferior): Check if already attached. gdb/testsuite/ChangeLog: * gdb.base/attach.exp: Add double attach test. --- gdb/gdbserver/ChangeLog | 5 ++ gdb/gdbserver/linux-low.c | 7 +- gdb/gdbserver/server.c | 3 + gdb/testsuite/ChangeLog | 4 ++ gdb/testsuite/gdb.base/attach.exp | 105 ++++++++++++++++++++++++------ 5 files changed, 100 insertions(+), 24 deletions(-) diff --git a/gdb/gdbserver/ChangeLog b/gdb/gdbserver/ChangeLog index 17593cb8c24..e9fe5ab03f0 100644 --- a/gdb/gdbserver/ChangeLog +++ b/gdb/gdbserver/ChangeLog @@ -1,3 +1,8 @@ +2019-02-07 Alan Hayward + + * linux-low.c (linux_attach): Add process before lwp. + * server.c (attach_inferior): Check if already attached. + 2019-02-07 Tom Tromey * x86-tdesc.h: Rename include guard. diff --git a/gdb/gdbserver/linux-low.c b/gdb/gdbserver/linux-low.c index 44016d23105..8c5a51f23c6 100644 --- a/gdb/gdbserver/linux-low.c +++ b/gdb/gdbserver/linux-low.c @@ -1188,18 +1188,19 @@ linux_attach (unsigned long pid) ptid_t ptid = ptid_t (pid, pid, 0); int err; + proc = linux_add_process (pid, 1); + /* Attach to PID. We will check for other threads soon. */ err = linux_attach_lwp (ptid); if (err != 0) { - std::string reason = linux_ptrace_attach_fail_reason_string (ptid, err); + remove_process (proc); + std::string reason = linux_ptrace_attach_fail_reason_string (ptid, err); error ("Cannot attach to process %ld: %s", pid, reason.c_str ()); } - proc = linux_add_process (pid, 1); - /* Don't ignore the initial SIGSTOP if we just attached to this process. It will be collected by wait shortly. */ initial_thread = find_thread_ptid (ptid_t (pid, pid, 0)); diff --git a/gdb/gdbserver/server.c b/gdb/gdbserver/server.c index f9bfdd73071..e960c10d402 100644 --- a/gdb/gdbserver/server.c +++ b/gdb/gdbserver/server.c @@ -295,6 +295,9 @@ attach_inferior (int pid) /* myattach should return -1 if attaching is unsupported, 0 if it succeeded, and call error() otherwise. */ + if (find_process_pid (pid) != nullptr) + error ("Already attached to process %d\n", pid); + if (myattach (pid) != 0) return -1; diff --git a/gdb/testsuite/ChangeLog b/gdb/testsuite/ChangeLog index d4ab609612f..1369b5a6b37 100644 --- a/gdb/testsuite/ChangeLog +++ b/gdb/testsuite/ChangeLog @@ -1,3 +1,7 @@ +2019-02-07 Alan Hayward + + * gdb.base/attach.exp: Add double attach test. + 2019-02-07 Simon Marchi * lib/gdb.exp (default_gdb_start): Don't match pagination diff --git a/gdb/testsuite/gdb.base/attach.exp b/gdb/testsuite/gdb.base/attach.exp index 2343354dda2..ec6e45766bc 100644 --- a/gdb/testsuite/gdb.base/attach.exp +++ b/gdb/testsuite/gdb.base/attach.exp @@ -45,7 +45,10 @@ if [get_compiler_info] { return -1 } -proc do_attach_tests {} { +# This is a test of the error cases for gdb's ability to attach to a +# running process. + +proc_with_prefix do_attach_failure_tests {} { global gdb_prompt global binfile global escapedbinfile @@ -54,7 +57,9 @@ proc do_attach_tests {} { global subdir global timeout global decimal - + + clean_restart $binfile + # Figure out a regular expression that will match the sysroot, # noting that the default sysroot is "target:", and also noting # that GDB will strip "target:" from the start of filenames when @@ -154,6 +159,75 @@ proc do_attach_tests {} { } } + # Verify that we can't double attach to the process. + + set test "first attach" + gdb_test_multiple "attach $testpid" "$test" { + -re "Attaching to program.*`?$escapedbinfile'?, process $testpid.*main.*at .*$srcfile:.*$gdb_prompt $" { + pass "$test" + } + -re "Attaching to program.*`?$escapedbinfile\.exe'?, process $testpid.*\[Switching to thread $testpid\..*\].*$gdb_prompt $" { + # Response expected on Cygwin. + pass "$test" + } + } + + gdb_test "add-inferior" "Added inferior 2.*" "add empty inferior 2" + gdb_test "inferior 2" "Switching to inferior 2.*" "switch to inferior 2" + + set test "fail to attach again" + gdb_test_multiple "attach $testpid" "$test" { + -re "Attaching to process $testpid.*warning: process .* is already traced by process .*$gdb_prompt $" { + pass "$test" + } + -re "Attaching to process .* failed.*$gdb_prompt $" { + # Response expected when using gdbserver. + pass "$test" + } + } + + gdb_test "inferior 1" "Switching to inferior 1.*" "switch to inferior 1" + set test "exit after attach failures" + gdb_test "kill" \ + "" \ + "$test" \ + "Kill the program being debugged.*y or n. $" \ + "y" + + # Another "don't leave a process around" + kill_wait_spawned_process $test_spawn_id +} + +# This is a test of gdb's ability to attach to a running process. + +proc_with_prefix do_attach_tests {} { + global gdb_prompt + global binfile + global escapedbinfile + global srcfile + global testfile + global subdir + global timeout + global decimal + + clean_restart $binfile + + # Figure out a regular expression that will match the sysroot, + # noting that the default sysroot is "target:", and also noting + # that GDB will strip "target:" from the start of filenames when + # operating on the local filesystem. However the default sysroot + # can be set via configure option --with-sysroot, which can be "/". + # If $binfile is a absolute path, so pattern + # "$sysroot$escapedbinfile" below is wrong. Use [^\r\n]* to make + # $sysroot simple. + set sysroot "\[^\r\n\]*" + + # Start the program running and then wait for a bit, to be sure + # that it can be attached to. + + set test_spawn_id [spawn_wait_for_attach $binfile] + set testpid [spawn_id_get_pid $test_spawn_id] + # Verify that we can attach to the process by first giving its # executable name via the file command, and using attach with the # process ID. @@ -313,10 +387,14 @@ proc do_attach_tests {} { kill_wait_spawned_process $test_spawn_id } -proc do_call_attach_tests {} { +# Test attaching when the target is inside a system call. + +proc_with_prefix do_call_attach_tests {} { global gdb_prompt global binfile2 - + + clean_restart + set test_spawn_id [spawn_wait_for_attach $binfile2] set testpid [spawn_id_get_pid $test_spawn_id] @@ -358,7 +436,7 @@ proc do_call_attach_tests {} { kill_wait_spawned_process $test_spawn_id } -proc do_command_attach_tests {} { +proc_with_prefix do_command_attach_tests {} { global gdb_prompt global binfile global verbose @@ -435,23 +513,8 @@ proc test_command_line_attach_run {} { } } -# Start with a fresh gdb - -gdb_exit -gdb_start -gdb_reinitialize_dir $srcdir/$subdir -gdb_load ${binfile} - -# This is a test of gdb's ability to attach to a running process. - do_attach_tests - -# Test attaching when the target is inside a system call - -gdb_exit -gdb_start - -gdb_reinitialize_dir $srcdir/$subdir +do_attach_failure_tests do_call_attach_tests # Test "gdb --pid" -- 2.30.2