From e18a6d1441cfb5d43d3193a2643207fc3f95fd5a Mon Sep 17 00:00:00 2001 From: Andrew Burgess Date: Mon, 28 Oct 2019 16:26:19 +0000 Subject: [PATCH] gcc/riscv: Add a mechanism to remove some calls to _riscv_save_0 When using the -msave-restore flag we end up with calls to _riscv_save_0 and _riscv_restore_0. These functions adjust the stack and save or restore the return address. Due to grouping multiple save/restore stub functions together the save/restore 0 calls actually save s0, s1, s2, and the return address, but only the return address actually matters. Leaf functions don't call the save/restore stubs, so whenever we do see a call to the save/restore stubs, the store of the return address is required. If we look in gcc/config/riscv/riscv.c at the function riscv_expand_prologue and riscv_expand_epilogue we can see that it would be reasonably easy to adjust these functions to avoid the calls to the save/restore stubs for those cases where we are about to call _riscv_save_0 and _riscv_restore_0, however, the actual code size saving this would give is debatable, with linker relaxation, the calls to save/restore are often just 4-bytes, and can sometimes even be 2-bytes, while leaving the stack adjust and return address save inline is always going to be 4-bytes. The interesting case is when we call _riscv_save_0 and _riscv_restore_0, and also have a frame that would (without save/restore) have resulted in a tail call. In this case if we could remove the save/restore calls, and restore the tail call then we would get a real size saving. The problem is that the choice of generating a tail call or not is done during the gimple expand pass, at which point we don't know how many registers we need to save (or restore). The solution presented in this patch offers a partial solution to this problem. By using the TARGET_MACHINE_DEPENDENT_REORG pass to implement a very limited pattern matching we identify functions that call _riscv_save_0 and _riscv_restore_0, and which could be converted to make use of a tail call. These functions are then converted to the non save/restore tail call form. This should result in a code size reduction when compiling with -Os and with the -msave-restore flag. gcc/ChangeLog: * config.gcc: Add riscv-sr.o to extra_objs for riscv. * config/riscv/riscv-sr.c: New file. * config/riscv/riscv.c (riscv_reorg): New function. (TARGET_MACHINE_DEPENDENT_REORG): Define. * config/riscv/riscv.h (SIBCALL_REG_P): Define. (riscv_remove_unneeded_save_restore_calls): Declare. * config/riscv/t-riscv (riscv-sr.o): New build rule. gcc/testsuite/ChangeLog: * gcc.target/riscv/save-restore-2.c: New file. * gcc.target/riscv/save-restore-3.c: New file. * gcc.target/riscv/save-restore-4.c: New file. * gcc.target/riscv/save-restore-5.c: New file. * gcc.target/riscv/save-restore-6.c: New file. * gcc.target/riscv/save-restore-7.c: New file. * gcc.target/riscv/save-restore-8.c: New file. From-SVN: r277527 --- gcc/ChangeLog | 10 + gcc/config.gcc | 2 +- gcc/config/riscv/riscv-sr.c | 465 ++++++++++++++++++ gcc/config/riscv/riscv.c | 13 + gcc/config/riscv/riscv.h | 8 + gcc/config/riscv/t-riscv | 5 + gcc/testsuite/ChangeLog | 10 + .../gcc.target/riscv/save-restore-2.c | 22 + .../gcc.target/riscv/save-restore-3.c | 16 + .../gcc.target/riscv/save-restore-4.c | 19 + .../gcc.target/riscv/save-restore-5.c | 9 + .../gcc.target/riscv/save-restore-6.c | 16 + .../gcc.target/riscv/save-restore-7.c | 30 ++ .../gcc.target/riscv/save-restore-8.c | 12 + 14 files changed, 636 insertions(+), 1 deletion(-) create mode 100644 gcc/config/riscv/riscv-sr.c create mode 100644 gcc/testsuite/gcc.target/riscv/save-restore-2.c create mode 100644 gcc/testsuite/gcc.target/riscv/save-restore-3.c create mode 100644 gcc/testsuite/gcc.target/riscv/save-restore-4.c create mode 100644 gcc/testsuite/gcc.target/riscv/save-restore-5.c create mode 100644 gcc/testsuite/gcc.target/riscv/save-restore-6.c create mode 100644 gcc/testsuite/gcc.target/riscv/save-restore-7.c create mode 100644 gcc/testsuite/gcc.target/riscv/save-restore-8.c diff --git a/gcc/ChangeLog b/gcc/ChangeLog index aa9c489b176..b875cef2793 100644 --- a/gcc/ChangeLog +++ b/gcc/ChangeLog @@ -1,3 +1,13 @@ +2019-10-28 Andrew Burgess + + * config.gcc: Add riscv-sr.o to extra_objs for riscv. + * config/riscv/riscv-sr.c: New file. + * config/riscv/riscv.c (riscv_reorg): New function. + (TARGET_MACHINE_DEPENDENT_REORG): Define. + * config/riscv/riscv.h (SIBCALL_REG_P): Define. + (riscv_remove_unneeded_save_restore_calls): Declare. + * config/riscv/t-riscv (riscv-sr.o): New build rule. + 2019-10-28 Prathamesh Kulkarni PR tree-optimization/92163 diff --git a/gcc/config.gcc b/gcc/config.gcc index bdc2253f8ef..b4440877e99 100644 --- a/gcc/config.gcc +++ b/gcc/config.gcc @@ -523,7 +523,7 @@ pru-*-*) ;; riscv*) cpu_type=riscv - extra_objs="riscv-builtins.o riscv-c.o" + extra_objs="riscv-builtins.o riscv-c.o riscv-sr.o" d_target_objs="riscv-d.o" ;; rs6000*-*-*) diff --git a/gcc/config/riscv/riscv-sr.c b/gcc/config/riscv/riscv-sr.c new file mode 100644 index 00000000000..e3180efcbcc --- /dev/null +++ b/gcc/config/riscv/riscv-sr.c @@ -0,0 +1,465 @@ +/* This file is part of GCC. + +GCC is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 3, or (at your option) +any later version. + +GCC is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with GCC; see the file COPYING3. If not see +. */ + +/* This file contains code aimed at optimizing function generated with the + use of '-msave-restore. The goal is to identify cases where the call + out to the save/restore routines are sub-optimal, and remove the calls + in this case. + + As GCC currently makes the choice between using or not using + save/restore early on (during the gimple expand pass) once we have + selected to use save/restore we are stuck with it. */ + +#define IN_TARGET_CODE 1 + +#include "config.h" +#include "system.h" +#include "coretypes.h" +#include "tm.h" +#include "rtl.h" +#include "function.h" +#include "memmodel.h" +#include "emit-rtl.h" +#include "target.h" +#include "basic-block.h" +#include "bitmap.h" +#include "df.h" +#include "tree.h" +#include "expr.h" +#include "cfg.h" + +/* This file should be included last. */ +#include "hard-reg-set.h" + +/* Look in the function prologue for a call to the save stub. Ensure that + the instruction is as we expect (see detail below) and if the + instruction matches return a pointer to it. Otherwise, return NULL. + + We expect the function prologue to look like this: + + (note NOTE_INSN_BASIC_BLOCK) + (insn (parallel [ + (unspec_volatile [ + (const_int 2 [0x2]) + ] UNSPECV_GPR_SAVE) + (clobber (reg:SI 5 t0)) + (clobber (reg:SI 6 t1))]) + (note NOTE_INSN_PROLOGUE_END) + + Between the NOTE_INSN_BASIC_BLOCK and the GPR_SAVE insn we might find + other notes of type NOTE_INSN_DELETED and/or NOTE_INSN_FUNCTION_BEG. + + The parameter BODY is updated to point to the first instruction after + the NOTE_INSN_PROLOGUE_END or will be updated to NULL if the prologue + end note was not found. */ + +static rtx_insn * +riscv_sr_match_prologue (rtx_insn **body) +{ + rtx_insn *insn, *bb_note; + *body = NULL; + + /* Find the prologue end note. */ + for (insn = get_insns (); insn != NULL; insn = NEXT_INSN (insn)) + if (NOTE_P (insn) && NOTE_KIND (insn) == NOTE_INSN_PROLOGUE_END) + { + *body = NEXT_INSN (insn); + break; + } + + /* If we don't have the prologue end note and at least one instruction + before it, then this function doesn't have the structure we expect. */ + if (insn == NULL + || PREV_INSN (insn) == NULL) + return NULL; + + /* The INSN is the end of prologue note, before this we expect to find + one real instruction which makes the prologue, and before that we + expect to find some number of notes for deleted instructions, the + beginning of the function, and finally a basicblock beginning. The + following loop checks that this assumption is true. */ + for (bb_note = PREV_INSN (PREV_INSN (insn)); + bb_note != NULL; + bb_note = PREV_INSN (bb_note)) + { + if (!NOTE_P (bb_note)) + return NULL; + if (NOTE_KIND (bb_note) == NOTE_INSN_BASIC_BLOCK) + break; + if (NOTE_KIND (bb_note) != NOTE_INSN_DELETED + && NOTE_KIND (bb_note) != NOTE_INSN_FUNCTION_BEG) + return NULL; + } + if (bb_note == NULL) + return NULL; + + /* Set INSN to point to the actual interesting prologue instruction. */ + insn = PREV_INSN (insn); + if (INSN_P (insn) + && INSN_CODE (insn) == CODE_FOR_gpr_save + /* Check this is a call to _riscv_save_0. */ + && GET_CODE (PATTERN (insn)) == PARALLEL + && GET_CODE (XVECEXP (PATTERN (insn), 0, 0)) == UNSPEC_VOLATILE + && (GET_CODE (XVECEXP (XVECEXP (PATTERN (insn), 0, 0), 0, 0)) + == CONST_INT) + && XINT (XVECEXP (XVECEXP (PATTERN (insn), 0, 0), 0, 0), 0) == 2) + return insn; + + return NULL; +} + +/* Find the first instruction in the epilogue of the current function, and + return a pointer to that instruction if, and only if, the epilogue has + the correct structure that would allow us to optimize out the call to + _riscv_restore_0. */ + +static rtx_insn * +riscv_sr_match_epilogue (void) +{ + /* Find the first instruction in the epilogue. */ + rtx_insn *insn, *start; + for (insn = get_insns (); insn != NULL; insn = NEXT_INSN (insn)) + if (NOTE_P (insn) && NOTE_KIND (insn) == NOTE_INSN_EPILOGUE_BEG) + { + insn = NEXT_INSN (insn); + break; + } + if (insn == NULL) + return NULL; + + /* At this point INSN is the first instruction in the epilogue. A + standard epilogue (of the form we expect to handle) consists of the + following instructions: + + 1. A stack_tiesi or stack_tiedi (for RV32 and RV64 respectively), + + 2. An optional use instruction for the register holding the return + value. This will be missing in functions with no return value, + + 3. A gpr_restore instruction, and + + 4. A jump instruction of type gpr_restore_return. */ + start = insn; + if (INSN_CODE (insn) != CODE_FOR_stack_tiesi + && INSN_CODE (insn) != CODE_FOR_stack_tiedi) + return NULL; + + insn = NEXT_INSN (insn); + if (INSN_P (insn) && GET_CODE (PATTERN (insn)) == USE) + insn = NEXT_INSN (insn); + + if (!INSN_P (insn) || INSN_CODE (insn) != CODE_FOR_gpr_restore) + return NULL; + + insn = NEXT_INSN (insn); + if (!INSN_P (insn) || INSN_CODE (insn) != CODE_FOR_gpr_restore_return) + return NULL; + + return start; +} + +/* Helper for riscv_remove_unneeded_save_restore_calls. If we match the + prologue instructions but not the epilogue then we might have the case + where the epilogue has been optimized out due to a call to a no-return + function. In this case we might be able to remove the prologue too - + that's what this function does. PROLOGUE is the matched prolgoue + instruction, by the time this function returns the progloue instruction + may have been removed. */ + +static void +check_for_no_return_call (rtx_insn *prologue) +{ + /* Check to see if we have the following pattern: + + PROLOGUE instruction + NOTE_INSN_PROLOGUE_END + A no-return call instruction + + If we do, then we can remove the prologue instruction safely. Remember + that we've already confirmed by this point that the prologue is a call + to riscv_save_0. */ + + if (dump_file) + fprintf (dump_file, + "Prologue matched, checking for no-return epilogue.\n"); + + rtx_insn *tmp = NEXT_INSN (prologue); + if (!NOTE_P (tmp) || NOTE_KIND (tmp) != NOTE_INSN_PROLOGUE_END) + return; + + /* Skip any extra notes in here, they're most likely just debug. */ + do + { + tmp = NEXT_INSN (tmp); + } + while (tmp != NULL && NOTE_P (tmp)); + + if (tmp == NULL || !INSN_P (tmp)) + return; + + bool noreturn_p = find_reg_note (tmp, REG_NORETURN, NULL_RTX) != NULL_RTX; + if (!CALL_P (tmp) || !noreturn_p) + return; + + if (dump_file) + fprintf (dump_file, + "Prologue call to riscv_save_0 followed by noreturn call, " + "removing prologue.\n"); + remove_insn (prologue); +} + +/* Entry point called from riscv_reorg to remove some unneeded calls to + the save and restore stubs. This should only be called when + -msave-restore is in use. + + We identify some simple cases where the function looks like this: + + call t0,__riscv_save_0 + + call foo + tail __riscv_restore_0 + + And transform it into something like this: + + + tail foo + + In the above examples, what can appear in is pretty + restricted; only caller saved registers can be touched, this prevents + any additional calls (as they would write to 'ra'). */ + +void +riscv_remove_unneeded_save_restore_calls (void) +{ + /* Will point to the first instruction of the function body, after the + prologue end note. */ + rtx_insn *body = NULL; + + /* Should only be called with -msave-restore is in use. */ + gcc_assert (TARGET_SAVE_RESTORE); + + /* Match the expected prologue and epilogue patterns. If either of these + fail to match then we abandon our attempt to optimize this function. */ + rtx_insn *prologue_matched = riscv_sr_match_prologue (&body); + if (prologue_matched == NULL || body == NULL) + return; + + rtx_insn *epilogue_matched = riscv_sr_match_epilogue (); + if (epilogue_matched == NULL) + { + check_for_no_return_call (prologue_matched); + return; + } + + if (dump_file) + fprintf (dump_file, + "Could be a candidate for save/restore removal\n"); + + /* We want to check which registers this function uses. */ + df_analyze (); + + int call_count = 0; + bool good_use = true; + int epilogue_count = 0; + + /* Now examine all of the instructions that make up this function, we're + looking for call instructions and also double checking register usage + while we're at it (see comments below). */ + basic_block bb; + FOR_EACH_BB_FN (bb, cfun) + { + rtx_insn *insn; + + FOR_BB_INSNS (bb, insn) + { + if (dump_file) + fprintf (dump_file, + "Block %d, Insn %d\n", bb->index, INSN_UID (insn)); + + /* If we scan the epilogue we will fall foul of our register + usage check below (due to it's use of the return address), so + once we spot we're at the epilogue, just skip the rest of this + block. Scanning the prologue instructions again (if they + match the expected pattern) is harmless. */ + if (NOTE_P (insn) + && NOTE_KIND (insn) == NOTE_INSN_EPILOGUE_BEG) + { + ++epilogue_count; + break; + } + + if (!INSN_P (insn)) + continue; + + if (CALL_P (insn)) + ++call_count; + else + { + df_ref use; + + FOR_EACH_INSN_USE (use, insn) + { + /* If the function makes use of any registers that are + callee saved then we should be saving them in this + function, which would suggest that a call to the save + and restore functions is required. This would seem to + indicate that something has gone wrong above, as we + should only get here if we are saving zero registers. + + The one exception to this rule is the return address + register used within a call instruction. We can + optimize a single call within a function (by making it + a tail call), so we skip call instructions here. */ + if (!call_used_regs[DF_REF_REGNO (use)]) + { + if (dump_file) + fprintf (dump_file, + "Found unsupported use of callee saved " + "register in instruction %d\n", + INSN_UID (insn)); + good_use = false; + break; + } + } + if (!good_use) + break; + } + } + } + + /* If we used any registers that would indicate a need for a call to a + save/restore stub then don't optimize. */ + if (!good_use) + return; + + /* If this function has multiple epilogues, then for now we don't try to + optimize it. */ + if (epilogue_count != 1) + return; + + /* We can only optimize functions containing a single call, any more + would require us to add instructions to store the return address on + the stack (and restore it before we return). We could do this in the + future, but for now we don't. A single call can be transformed into + a tail call reasonably easily. */ + if (call_count > 1) + { + if (dump_file) + fprintf (dump_file, + "Found too many call instructions\n"); + return; + } + + rtx_insn *epilogue_begin_note = PREV_INSN (epilogue_matched); + gcc_assert (NOTE_P (epilogue_begin_note) + && NOTE_KIND (epilogue_begin_note) == NOTE_INSN_EPILOGUE_BEG); + + df_finish_pass (false); + + /* Find the first instruction before the function epilogue. */ + rtx_insn *insn_before_epilogue; + for (insn_before_epilogue = PREV_INSN (epilogue_begin_note); + NOTE_P (insn_before_epilogue); + insn_before_epilogue = PREV_INSN (insn_before_epilogue)) + ; + + /* Leaf functions will not generate calls to the save/restore stubs, so + there's no need for this optimization there. We know this function + has no more than 1 call (checked above). To convert this single call + into a tail call we rely on the call being the last thing before the + epilogue. */ + if (GET_CODE (insn_before_epilogue) != CALL_INSN) + return; + + /* The last instruction in this block, just before the epilogue is a + call. We can potentially change this call into a tail call. */ + rtx_insn *call = insn_before_epilogue; + + /* Transform call in insn to a sibcall, this will only be done if the + last thing in the function is a call. */ + rtx callpat = PATTERN (call); + gcc_assert (GET_CODE (callpat) == PARALLEL); + + /* Extract from CALLPAT the information we need to build the sibcall. */ + rtx target_call = NULL; + rtx tmp_rtx = XVECEXP (callpat, 0, 0); + rtx set_target = NULL; + switch (GET_CODE (tmp_rtx)) + { + case CALL: + target_call = tmp_rtx; + break; + + case SET: + { + set_target = XEXP (tmp_rtx, 0); + tmp_rtx = XEXP (tmp_rtx, 1); + if (GET_CODE (tmp_rtx) != CALL) + return; + target_call = tmp_rtx; + break; + } + + default: + return; + } + + rtx target_mem = XEXP (target_call, 0); + if (GET_CODE (target_mem) != MEM) + return; + + rtx target = XEXP (target_mem, 0); + if (GET_CODE (target) != SYMBOL_REF && GET_CODE (target) != REG) + return; + + /* The sibcall instructions can only use a specific subset of + registers, we're about to (possibly) move a call through a + register from the function body and make it a sibcall. If we're + not using an appropriate register then we can't make this change. + + Maybe in some future iteration we could actually scan the + function, find a suitable sibcall register, and switch over the + registers. But we don't do that yet. */ + if (GET_CODE (target) == REG + && !SIBCALL_REG_P (REGNO (target))) + return; + + rtx sibcall = NULL; + if (set_target != NULL) + sibcall + = gen_sibcall_value_internal (set_target, target, const0_rtx); + else + sibcall = gen_sibcall_internal (target, const0_rtx); + + rtx_insn *before_call = PREV_INSN (call); + remove_insn (call); + rtx_insn *insn = emit_call_insn_after_setloc (sibcall, before_call, + INSN_LOCATION (call)); + REG_NOTES (insn) = REG_NOTES (call); + SIBLING_CALL_P (insn) = 1; + + /* Now update the prologue and epilogue to take account of the + changes within the function body. */ + remove_insn (prologue_matched); + remove_insn (NEXT_INSN (NEXT_INSN (NEXT_INSN (epilogue_matched)))); + remove_insn (NEXT_INSN (NEXT_INSN (epilogue_matched))); + remove_insn (NEXT_INSN (epilogue_matched)); + remove_insn (epilogue_matched); + + if (dump_file) + fprintf (dump_file, + "Save/restore successfully removed\n"); +} diff --git a/gcc/config/riscv/riscv.c b/gcc/config/riscv/riscv.c index 77a3ad94aa8..11a43c1b64d 100644 --- a/gcc/config/riscv/riscv.c +++ b/gcc/config/riscv/riscv.c @@ -5007,6 +5007,16 @@ riscv_promote_function_mode (const_tree type ATTRIBUTE_UNUSED, return mode; } +/* Implement TARGET_MACHINE_DEPENDENT_REORG. */ + +static void +riscv_reorg (void) +{ + /* Do nothing unless we have -msave-restore */ + if (TARGET_SAVE_RESTORE) + riscv_remove_unneeded_save_restore_calls (); +} + /* Initialize the GCC target structure. */ #undef TARGET_ASM_ALIGNED_HI_OP #define TARGET_ASM_ALIGNED_HI_OP "\t.half\t" @@ -5181,6 +5191,9 @@ riscv_promote_function_mode (const_tree type ATTRIBUTE_UNUSED, #undef TARGET_CUSTOM_FUNCTION_DESCRIPTORS #define TARGET_CUSTOM_FUNCTION_DESCRIPTORS 1 +#undef TARGET_MACHINE_DEPENDENT_REORG +#define TARGET_MACHINE_DEPENDENT_REORG riscv_reorg + struct gcc_target targetm = TARGET_INITIALIZER; #include "gt-riscv.h" diff --git a/gcc/config/riscv/riscv.h b/gcc/config/riscv/riscv.h index 246494663f6..b1e3403f8a7 100644 --- a/gcc/config/riscv/riscv.h +++ b/gcc/config/riscv/riscv.h @@ -289,6 +289,10 @@ along with GCC; see the file COPYING3. If not see #define FP_REG_P(REGNO) \ ((unsigned int) ((int) (REGNO) - FP_REG_FIRST) < FP_REG_NUM) +/* True when REGNO is in SIBCALL_REGS set. */ +#define SIBCALL_REG_P(REGNO) \ + TEST_HARD_REG_BIT (reg_class_contents[SIBCALL_REGS], REGNO) + #define FP_REG_RTX_P(X) (REG_P (X) && FP_REG_P (REGNO (X))) /* Use s0 as the frame pointer if it is so requested. */ @@ -918,4 +922,8 @@ extern unsigned riscv_stack_boundary; #define SWSP_REACH (4LL << C_SxSP_BITS) #define SDSP_REACH (8LL << C_SxSP_BITS) +/* Called from RISCV_REORG, this is defined in riscv-sr.c. */ + +extern void riscv_remove_unneeded_save_restore_calls (void); + #endif /* ! GCC_RISCV_H */ diff --git a/gcc/config/riscv/t-riscv b/gcc/config/riscv/t-riscv index ece3a75d512..5ecb3c160a6 100644 --- a/gcc/config/riscv/t-riscv +++ b/gcc/config/riscv/t-riscv @@ -5,6 +5,11 @@ riscv-builtins.o: $(srcdir)/config/riscv/riscv-builtins.c $(CONFIG_H) \ $(COMPILER) -c $(ALL_COMPILERFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ $(srcdir)/config/riscv/riscv-builtins.c +riscv-sr.o: $(srcdir)/config/riscv/riscv-sr.c $(CONFIG_H) \ + $(SYSTEM_H) + $(COMPILER) -c $(ALL_COMPILERFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ + $(srcdir)/config/riscv/riscv-sr.c + riscv-c.o: $(srcdir)/config/riscv/riscv-c.c $(CONFIG_H) $(SYSTEM_H) \ coretypes.h $(TM_H) $(TREE_H) output.h $(C_COMMON_H) $(TARGET_H) $(COMPILER) -c $(ALL_COMPILERFLAGS) $(ALL_CPPFLAGS) $(INCLUDES) \ diff --git a/gcc/testsuite/ChangeLog b/gcc/testsuite/ChangeLog index b7658e03628..14b3147d847 100644 --- a/gcc/testsuite/ChangeLog +++ b/gcc/testsuite/ChangeLog @@ -1,3 +1,13 @@ +2019-10-28 Andrew Burgess + + * gcc.target/riscv/save-restore-2.c: New file. + * gcc.target/riscv/save-restore-3.c: New file. + * gcc.target/riscv/save-restore-4.c: New file. + * gcc.target/riscv/save-restore-5.c: New file. + * gcc.target/riscv/save-restore-6.c: New file. + * gcc.target/riscv/save-restore-7.c: New file. + * gcc.target/riscv/save-restore-8.c: New file. + 2019-10-28 Prathamesh Kulkarni PR tree-optimization/92163 diff --git a/gcc/testsuite/gcc.target/riscv/save-restore-2.c b/gcc/testsuite/gcc.target/riscv/save-restore-2.c new file mode 100644 index 00000000000..204bf67b66e --- /dev/null +++ b/gcc/testsuite/gcc.target/riscv/save-restore-2.c @@ -0,0 +1,22 @@ +/* { dg-options "-Os -msave-restore" } */ + +/* With -msave-restore in use it should not be possible to remove the calls + to the save and restore stubs in this case (in current GCC). */ + +extern void fn2 (); + +volatile int a = 0; + +int +fn1 () +{ + fn2 (); + + while (a) + ; + + return 0; +} + +/* { dg-final { scan-assembler "call\[ \t\]*t0,__riscv_save_0" } } */ +/* { dg-final { scan-assembler "tail\[ \t\]*__riscv_restore_0" } } */ diff --git a/gcc/testsuite/gcc.target/riscv/save-restore-3.c b/gcc/testsuite/gcc.target/riscv/save-restore-3.c new file mode 100644 index 00000000000..6bf9fb014d6 --- /dev/null +++ b/gcc/testsuite/gcc.target/riscv/save-restore-3.c @@ -0,0 +1,16 @@ +/* { dg-options "-Os -msave-restore" } */ + +/* With -msave-restore in use GCC should be able to remove the calls to the + save and restore stubs in this case, replacing them with a tail call to + foo. */ + +extern int foo (); + +int bar () +{ + return foo (); +} + +/* { dg-final { scan-assembler-not "call\[ \t\]*t0,__riscv_save_0" } } */ +/* { dg-final { scan-assembler-not "tail\[ \t\]*__riscv_restore_0" } } */ +/* { dg-final { scan-assembler "tail\[ \t\]*foo" } } */ diff --git a/gcc/testsuite/gcc.target/riscv/save-restore-4.c b/gcc/testsuite/gcc.target/riscv/save-restore-4.c new file mode 100644 index 00000000000..9a0313f2c42 --- /dev/null +++ b/gcc/testsuite/gcc.target/riscv/save-restore-4.c @@ -0,0 +1,19 @@ +/* { dg-options "-Os -msave-restore" } */ + +/* This test covers a case where we can't (currently) remove the calls to + the save/restore stubs. The cast of the return value from BAR requires + a zero extension between the call to BAR, and the return from FOO, this + currently prevents the removal of the save/restore calls. */ + +typedef unsigned long long u_64; +typedef unsigned int u_32; + +extern u_32 bar (u_32 arg); + +u_64 foo (u_32 arg) +{ + return (u_64) bar (arg); +} + +/* { dg-final { scan-assembler "call\[ \t\]*t0,__riscv_save_0" } } */ +/* { dg-final { scan-assembler "tail\[ \t\]*__riscv_restore_0" } } */ diff --git a/gcc/testsuite/gcc.target/riscv/save-restore-5.c b/gcc/testsuite/gcc.target/riscv/save-restore-5.c new file mode 100644 index 00000000000..fe0ffdcd504 --- /dev/null +++ b/gcc/testsuite/gcc.target/riscv/save-restore-5.c @@ -0,0 +1,9 @@ +typedef int (*FPTR) (void); +FPTR a; + +int +func () +{ + int b = a (); + return b; +} diff --git a/gcc/testsuite/gcc.target/riscv/save-restore-6.c b/gcc/testsuite/gcc.target/riscv/save-restore-6.c new file mode 100644 index 00000000000..530865456a2 --- /dev/null +++ b/gcc/testsuite/gcc.target/riscv/save-restore-6.c @@ -0,0 +1,16 @@ +/* { dg-options "-Os -msave-restore" } */ + +/* With -msave-restore in use GCC should be able to remove the calls to the + save and restore stubs in this case, replacing them with a tail call to + other_func. */ + +extern void other_func (); + +void func () +{ + other_func (); +} + +/* { dg-final { scan-assembler-not "call\[ \t\]*t0,__riscv_save_0" } } */ +/* { dg-final { scan-assembler-not "tail\[ \t\]*__riscv_restore_0" } } */ +/* { dg-final { scan-assembler "tail\[ \t\]*other_func" } } */ diff --git a/gcc/testsuite/gcc.target/riscv/save-restore-7.c b/gcc/testsuite/gcc.target/riscv/save-restore-7.c new file mode 100644 index 00000000000..06719c4e413 --- /dev/null +++ b/gcc/testsuite/gcc.target/riscv/save-restore-7.c @@ -0,0 +1,30 @@ +/* { dg-options "-Os -msave-restore" } */ + +/* With -msave-restore in use it should not be possible to remove the calls + to the save and restore stubs in this case (in current GCC). */ + +enum + { + VAL_A, + VAL_B, + VAL_C, + VAL_D + } a; + +extern void other_1 (); +extern void other_2 (); + +void func () +{ + switch (a) + { + case VAL_B: + case VAL_C: + other_1 (); + case VAL_D: + other_2 (); + } +} + +/* { dg-final { scan-assembler "call\[ \t\]*t0,__riscv_save_0" } } */ +/* { dg-final { scan-assembler "tail\[ \t\]*__riscv_restore_0" } } */ diff --git a/gcc/testsuite/gcc.target/riscv/save-restore-8.c b/gcc/testsuite/gcc.target/riscv/save-restore-8.c new file mode 100644 index 00000000000..8880cd288ee --- /dev/null +++ b/gcc/testsuite/gcc.target/riscv/save-restore-8.c @@ -0,0 +1,12 @@ +/* { dg-options "-Os -msave-restore" } */ + +/* As a leaf function this should never have the calls to the save and + restore stubs added, but lets check anyway. */ + +int func () +{ + return 3; +} + +/* { dg-final { scan-assembler-not "call\[ \t\]*t0,__riscv_save_0" } } */ +/* { dg-final { scan-assembler-not "tail\[ \t\]*__riscv_restore_0" } } */ -- 2.30.2