From e7127d25c56b9af237366dac79e3b4a67b306fa4 Mon Sep 17 00:00:00 2001 From: Sergio Prado Date: Wed, 15 Jun 2016 09:40:59 -0300 Subject: [PATCH] configs/toradex_apalis_imx6_defconfig: new board Signed-off-by: Sergio Prado Signed-off-by: Thomas Petazzoni --- board/toradex/apalis-imx6/genimage.cfg | 15 +++++++ board/toradex/apalis-imx6/post-image.sh | 20 ++++++++++ board/toradex/apalis-imx6/readme.txt | 53 +++++++++++++++++++++++++ board/toradex/apalis-imx6/uEnv.txt | 6 +++ configs/toradex_apalis_imx6_defconfig | 24 +++++++++++ 5 files changed, 118 insertions(+) create mode 100644 board/toradex/apalis-imx6/genimage.cfg create mode 100755 board/toradex/apalis-imx6/post-image.sh create mode 100644 board/toradex/apalis-imx6/readme.txt create mode 100644 board/toradex/apalis-imx6/uEnv.txt create mode 100644 configs/toradex_apalis_imx6_defconfig diff --git a/board/toradex/apalis-imx6/genimage.cfg b/board/toradex/apalis-imx6/genimage.cfg new file mode 100644 index 0000000000..fe359bd93e --- /dev/null +++ b/board/toradex/apalis-imx6/genimage.cfg @@ -0,0 +1,15 @@ +# Minimal SD card image for the Toradex Apalis i.MX6 COM +# +# It does not need a boot section for a bootloader since it is booted +# from its internal flash memory (eMMC). + +image sdcard.img { + hdimage { + } + + partition rootfs { + partition-type = 0x83 + image = "rootfs.ext2" + size = 512M + } +} diff --git a/board/toradex/apalis-imx6/post-image.sh b/board/toradex/apalis-imx6/post-image.sh new file mode 100755 index 0000000000..2b49f9d3d0 --- /dev/null +++ b/board/toradex/apalis-imx6/post-image.sh @@ -0,0 +1,20 @@ +#!/usr/bin/env bash + +GENIMAGE_CFG="$(dirname $0)/genimage.cfg" +GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp" + +# copy the uEnv.txt to the output/images directory +cp board/toradex/apalis-imx6/uEnv.txt $BINARIES_DIR/uEnv.txt + +rm -rf "${GENIMAGE_TMP}" + +# generate rootfs.img +genimage \ + --rootpath "${TARGET_DIR}" \ + --tmppath "${GENIMAGE_TMP}" \ + --inputpath "${BINARIES_DIR}" \ + --outputpath "${BINARIES_DIR}" \ + --config "${GENIMAGE_CFG}" + +RET=${?} +exit ${RET} diff --git a/board/toradex/apalis-imx6/readme.txt b/board/toradex/apalis-imx6/readme.txt new file mode 100644 index 0000000000..feddad641c --- /dev/null +++ b/board/toradex/apalis-imx6/readme.txt @@ -0,0 +1,53 @@ +Toradex Apalis i.MX6 Computer on Module + +Intro +===== + +The Apalis iMX6 is a small form-factor Computer on Module that comes +in both quad core and dual core versions based on Freescale i.MX6Q and +Freescale i.MX6D SoCs respectively. The Cortex A9 quad core and dual +core CPU peaks at 1 GHz for commercial temperature variant, while the +industrial temperature variant has a peak frequency of 800 MHz. + +https://www.toradex.com/computer-on-modules/apalis-arm-family/freescale-imx-6 + +It supports two carrier boards: + +Apalis Evaluation Board +https://www.toradex.com/products/carrier-boards/apalis-evaluation-board + +Ixora Carrier Board +https://www.toradex.com/products/carrier-boards/ixora-carrier-board + +How to build it +=============== + +Configure Buildroot: + + $ make toradex_apalis_imx6_defconfig + +Compile everything and build the rootfs image: + + $ make + +How to boot the image +===================== + +The board only boots from its internal flash memory eMMC, so the +bootloader image should be copied to it, following the procedures +described in Toradex website. + +http://developer.toradex.com/knowledge-base/flashing-linux-on-imx6-modules + +Buildroot prepares a "sdcard.img" in output/images/ with the kernel +image, device tree and a root filesystem, ready to be dumped on an SD +card. + + $ dd if=output/images/sdcard.img of=/dev/sdX bs=1M + +To boot from the SD card, you should change the U-Boot +environment. Since U-Boot is running from internal eMMC, you will need +to access its command line prompt and manually set the necessary +variables to boot from the external SD card. For convenience, you can +use uEnv.txt provided in output/images/ as a reference to create the +necessary U-Boot variables to boot from the SD card. diff --git a/board/toradex/apalis-imx6/uEnv.txt b/board/toradex/apalis-imx6/uEnv.txt new file mode 100644 index 0000000000..96ab80cfb6 --- /dev/null +++ b/board/toradex/apalis-imx6/uEnv.txt @@ -0,0 +1,6 @@ +boot_file=zImage +fdt_file=imx6q-apalis_v1_0-ixora.dtb +sdargs=ip=off root=/dev/mmcblk1p1 rw,noatime rootfstype=ext4 rootwait +sddtbload=ext2load mmc 2:1 ${fdt_addr_r} boot/${fdt_file} +sdkernelload=ext2load mmc 2:1 ${kernel_addr_r} boot/${boot_file} +bootcmd=run setup; setenv bootargs ${defargs} ${sdargs} ${setupargs} ${vidargs}; echo Booting from SD card...; run sddtbload; run sdkernelload; bootz ${kernel_addr_r} - ${fdt_addr_r} diff --git a/configs/toradex_apalis_imx6_defconfig b/configs/toradex_apalis_imx6_defconfig new file mode 100644 index 0000000000..74d1fb3b9c --- /dev/null +++ b/configs/toradex_apalis_imx6_defconfig @@ -0,0 +1,24 @@ +BR2_arm=y +BR2_cortex_a9=y +BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y +BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0" +BR2_ROOTFS_POST_IMAGE_SCRIPT="board/toradex/apalis-imx6/post-image.sh" +BR2_LINUX_KERNEL=y +BR2_LINUX_KERNEL_CUSTOM_GIT=y +BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.toradex.com/linux-toradex.git" +BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="8f237ebe42f2cb911245369276a6b3043c2815f2" +BR2_LINUX_KERNEL_DEFCONFIG="apalis_imx6" +BR2_LINUX_KERNEL_DTS_SUPPORT=y +BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-apalis-eval imx6q-apalis-ixora imx6q-apalis_v1_0-eval imx6q-apalis_v1_0-ixora" +BR2_LINUX_KERNEL_INSTALL_TARGET=y +BR2_TARGET_ROOTFS_EXT2=y +BR2_TARGET_ROOTFS_EXT2_4=y +BR2_TARGET_UBOOT=y +BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y +BR2_TARGET_UBOOT_CUSTOM_GIT=y +BR2_TARGET_UBOOT_CUSTOM_REPO_URL="git://git.toradex.com/u-boot-toradex.git" +BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="1ef4a29e8cea0239411dde64f9617ad76248fd02" +BR2_TARGET_UBOOT_BOARD_DEFCONFIG="apalis_imx6" +BR2_TARGET_UBOOT_FORMAT_CUSTOM=y +BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.imx" +BR2_PACKAGE_HOST_GENIMAGE=y -- 2.30.2