From e7befc8dfc18ea0c04da1a9e2abf1111c41141da Mon Sep 17 00:00:00 2001 From: John Voltz Date: Tue, 11 Mar 2008 13:32:27 +0000 Subject: [PATCH] removed patch for older fakeroot --- package/fakeroot/fakeroot-revert-ltmain.patch | 8937 ----------------- 1 file changed, 8937 deletions(-) delete mode 100644 package/fakeroot/fakeroot-revert-ltmain.patch diff --git a/package/fakeroot/fakeroot-revert-ltmain.patch b/package/fakeroot/fakeroot-revert-ltmain.patch deleted file mode 100644 index 96ce680474..0000000000 --- a/package/fakeroot/fakeroot-revert-ltmain.patch +++ /dev/null @@ -1,8937 +0,0 @@ ---- fakeroot-1.8.1/ltmain.sh 2007-10-08 02:27:58.000000000 +0200 -+++ fakeroot-1.8.1.works/ltmain.sh 2007-10-10 09:46:24.000000000 +0200 -@@ -1,32 +1,30 @@ - # Generated from ltmain.m4sh; do not edit by hand - --# ltmain.sh (GNU libtool 1.2460 2007/05/10 17:30:29) 2.1a -+# ltmain.sh (GNU libtool 1.2237 2005/12/21 11:40:47) 2.1a - # Written by Gordon Matzigkeit , 1996 - --# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 Free Software Foundation, Inc. -+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 Free Software Foundation, Inc. - # This is free software; see the source for copying conditions. There is NO - # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. - --# GNU Libtool is free software; you can redistribute it and/or modify -+# This program is free software; you can redistribute it and/or modify - # it under the terms of the GNU General Public License as published by - # the Free Software Foundation; either version 2 of the License, or - # (at your option) any later version. - # --# As a special exception to the GNU General Public License, --# if you distribute this file as part of a program or library that --# is built using GNU Libtool, you may include this file under the --# same distribution terms that you use for the rest of that program. --# --# GNU Libtool is distributed in the hope that it will be useful, but -+# This program is distributed in the hope that it will be useful, but - # WITHOUT ANY WARRANTY; without even the implied warranty of - # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - # General Public License for more details. - # - # You should have received a copy of the GNU General Public License --# along with GNU Libtool; see the file COPYING. If not, a copy --# can be downloaded from http://www.gnu.org/licenses/gpl.html, --# or obtained by writing to the Free Software Foundation, Inc., --# 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+# along with this program; if not, write to the Free Software -+# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. -+# -+# As a special exception to the GNU General Public License, if you -+# distribute this file as part of a program that contains a -+# configuration script generated by Autoconf, you may include it under -+# the same distribution terms that you use for the rest of that program. - - # Usage: $progname [OPTION]... [MODE-ARG]... - # -@@ -60,12 +58,12 @@ - # When reporting a bug, please describe a test case to reproduce it and - # include the following information: - # --# host-triplet: $host -+# host-triplet: i486-pc-linux-gnu - # shell: $SHELL - # compiler: $LTCC - # compiler flags: $LTCFLAGS - # linker: $LD (gnu? $with_gnu_ld) --# $progname: (GNU libtool 1.2460 2007/05/10 17:30:29) 2.1a Debian-1 -+# $progname: (GNU libtool 1.2237 2005/12/21 11:40:47) 2.1a - # automake: $automake_version - # autoconf: $autoconf_version - # -@@ -73,10 +71,14 @@ - - PROGRAM=ltmain.sh - PACKAGE=libtool --VERSION="2.1a Debian-1" --TIMESTAMP=" 1.2460 2007/05/10 17:30:29" -+VERSION="2.1a" -+TIMESTAMP=" 1.2460 2005/12/21 11:40:47" - package_revision=1.2460 - -+## --------------------- ## -+## M4sh Initialization. ## -+## --------------------- ## -+ - # Be Bourne compatible - if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then - emulate sh -@@ -84,37 +86,74 @@ if test -n "${ZSH_VERSION+set}" && (emul - # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which - # is contrary to our usage. Disable this feature. - alias -g '${1+"$@"}'='"$@"' -- setopt NO_GLOB_SUBST --else -- case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac -+elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then -+ set -o posix - fi --BIN_SH=xpg4; export BIN_SH # for Tru64 - DUALCASE=1; export DUALCASE # for MKS sh - --# NLS nuisances: We save the old values to restore during execute mode. --# Only set LANG and LC_ALL to C if already set. --# These must not be set unconditionally because not all systems understand --# e.g. LANG=C (notably SCO). --for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES -+# Support unset when possible. -+if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then -+ as_unset=unset -+else -+ as_unset=false -+fi -+ -+ -+# Work around bugs in pre-3.0 UWIN ksh. -+$as_unset ENV MAIL MAILPATH -+PS1='$ ' -+PS2='> ' -+PS4='+ ' -+ -+# NLS nuisances. -+for as_var in \ -+ LANG LANGUAGE LC_ADDRESS LC_ALL LC_COLLATE LC_CTYPE LC_IDENTIFICATION \ -+ LC_MEASUREMENT LC_MESSAGES LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER \ -+ LC_TELEPHONE LC_TIME - do -- eval "if test \"\${$lt_var+set}\" = set; then -- save_$lt_var=\$$lt_var -- $lt_var=C -- export $lt_var -- fi" -+ if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then -+ eval $as_var=C; export $as_var -+ else -+ $as_unset $as_var -+ fi - done - --$lt_unset CDPATH -+# Required to use basename. -+if expr a : '\(a\)' >/dev/null 2>&1; then -+ as_expr=expr -+else -+ as_expr=false -+fi -+ -+if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then -+ as_basename=basename -+else -+ as_basename=false -+fi -+ - -+# Name of the executable. -+as_me=`$as_basename "$0" || -+$as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ -+ X"$0" : 'X\(//\)$' \| \ -+ X"$0" : 'X\(/\)$' \| \ -+ . : '\(.\)' 2>/dev/null || -+echo X/"$0" | -+ sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } -+ /^X\/\(\/\/\)$/{ s//\1/; q; } -+ /^X\/\(\/\).*/{ s//\1/; q; } -+ s/.*/./; q'` - - -+$as_unset CDPATH -+ - - - : ${CP="cp -f"} - : ${ECHO="echo"} --: ${EGREP="/bin/grep -E"} --: ${FGREP="/bin/grep -F"} --: ${GREP="/bin/grep"} -+: ${EGREP="grep -E"} -+: ${FGREP="grep -F"} -+: ${GREP="grep"} - : ${LN_S="ln -s"} - : ${MAKE="make"} - : ${MKDIR="mkdir"} -@@ -185,17 +224,23 @@ double_quote_subst='s/\(["`\\]\)/\\\1/g' - # `\'-ed in input to the same. If an odd number of `\' preceded a '$' - # in input to double_quote_subst, that '$' was protected from expansion. - # Since each input `\' is now two `\'s, look for any number of runs of --# four `\'s followed by two `\'s and then a '$'. `\' that '$'. --bs='\\' --bs2='\\\\' --bs4='\\\\\\\\' --dollar='\$' --sed_double_backslash="\ -- s/$bs4/&\\ --/g -- s/^$bs2$dollar/$bs&/ -- s/\\([^$bs]\\)$bs2$dollar/\\1$bs2$bs$dollar/g -- s/\n//g" -+# four `\'s followed by two `\'s and then a '$'. `\' that '$'. Note -+# that the embedded single quotes serve only to enhance readability. -+sed_double_backslash='s/^\(\(''\\\\''\\\\''\)*''\\\\''\)\$/\1\\$/; -+ s/\([^\\]\(''\\\\''\\\\''\)*''\\\\''\)\$/\1\\$/g' -+ -+# test EBCDIC or ASCII -+case `echo X|tr X '\101'` in -+ A) # ASCII based system -+ # \n is not interpreted correctly by Solaris 8 /usr/ucb/tr -+ SP2NL='tr \040 \012' -+ NL2SP='tr \015\012 \040\040' -+ ;; -+ *) # EBCDIC based system -+ SP2NL='tr \100 \n' -+ NL2SP='tr \r\n \100\100' -+ ;; -+esac - - # Standard options: - opt_dry_run=false -@@ -208,7 +253,7 @@ opt_verbose=false - # name if it has been set yet. - func_echo () - { -- $ECHO "$progname${mode+: }$mode: $*" -+ $ECHO "$progname${mode+: }$mode: "${1+"$@"} - } - - # func_verbose arg... -@@ -425,18 +470,14 @@ func_show_eval () - } - - -- -- -- - # func_version - # Echo version message to standard output and exit. - func_version () - { - $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / { -- s/^# // -- s/^# *$// -- s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/ -- p -+ s/^# //; s/^# *$//; -+ s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/; -+ p; - }' < "$progpath" - exit $? - } -@@ -446,10 +487,9 @@ func_version () - func_usage () - { - $SED -n '/^# Usage:/,/# -h/ { -- s/^# // -- s/^# *$// -- s/\$progname/'$progname'/ -- p -+ s/^# //; s/^# *$//; -+ s/\$progname/'$progname'/; -+ p; - }' < "$progpath" - $ECHO - $ECHO "run \`$progname --help | more' for full usage" -@@ -461,18 +501,16 @@ func_usage () - func_help () - { - $SED -n '/^# Usage:/,/# Report bugs to/ { -- s/^# // -- s/^# *$// -- s*\$progname*'$progname'* -- s*\$host*'"$host"'* -- s*\$SHELL*'"$SHELL"'* -- s*\$LTCC*'"$LTCC"'* -- s*\$LTCFLAGS*'"$LTCFLAGS"'* -- s*\$LD*'"$LD"'* -- s/\$with_gnu_ld/'"$with_gnu_ld"'/ -- s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/ -- s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/ -- p -+ s/^# //; s/^# *$//; -+ s*\$progname*'$progname'*; -+ s*\$SHELL*'"$SHELL"'*; -+ s*\$LTCC*'"$LTCC"'*; -+ s*\$LTCFLAGS*'"$LTCFLAGS"'*; -+ s*\$LD*'"$LD"'*; -+ s/\$with_gnu_ld/'"$with_gnu_ld"'/; -+ s/\$automake_version/'"`(automake --version) 2>/dev/null |$SED 1q`"'/; -+ s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/; -+ p; - }' < "$progpath" - exit $? - } -@@ -489,9 +527,6 @@ func_missing_arg () - exit_cmd=: - - -- -- -- - # Check that we have a working $ECHO. - if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. -@@ -526,8 +561,6 @@ execute_dlfiles= - preserve_args= - lo2o="s/\\.lo\$/.${objext}/" - o2lo="s/\\.${objext}\$/.lo/" --extracted_archives= --extracted_serial=0 - - opt_dry_run=false - opt_duplicate_deps=false -@@ -743,9 +776,9 @@ The following components of LINK-COMMAND - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE -- try to export only the symbols listed in SYMFILE -+ try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX -- try to export only the symbols matching REGEX -+ try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened -@@ -761,11 +794,9 @@ The following components of LINK-COMMAND - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -shared only do dynamic linking of libtool libraries - -shrext SUFFIX override the standard shared library file extension -- -static do not do any dynamic linking of uninstalled libtool libraries -- -static-libtool-libs -- do not do any dynamic linking of libtool libraries -+ -static do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] -- specify library version info [each variable defaults to 0] -+ specify library version info [each variable defaults to 0] - -weak LIBNAME declare that the target provides the LIBNAME interface - - All other options (arguments beginning with \`-') are ignored. -@@ -810,12 +841,15 @@ Otherwise, only FILE itself is deleted u - exit $? - } - --# Generated shell functions inserted here. -- -- -+# TEST SUITE MARKER ## NON-FUNCTION - # Parse options once, thoroughly. This comes as soon as possible in - # the script to make things like `libtool --version' happen quickly. - { -+ # sed scripts: -+ my_sed_single_opt='1s/^\(..\).*$/\1/;q' -+ my_sed_single_rest='1s/^..\(.*\)$/\1/;q' -+ my_sed_long_opt='1s/^\(-[^=]*\)=.*/\1/;q' -+ my_sed_long_arg='1s/^-[^=]*=//' - - # Shorthand for --mode=foo, only valid as the first argument - case $1 in -@@ -907,11 +941,28 @@ Otherwise, only FILE itself is deleted u - - # Separate optargs to long options: - -dlopen=*|--mode=*|--tag=*) -- func_opt_split "$opt" -- set dummy "$func_opt_split_opt" "$func_opt_split_arg" ${1+"$@"} -+ arg=`$ECHO "X$opt" | $Xsed -e "$my_sed_long_arg"` -+ opt=`$ECHO "X$opt" | $Xsed -e "$my_sed_long_opt"` -+ set dummy "$opt" "$arg" ${1+"$@"} - shift - ;; - -+ # Separate optargs to short options: -+# -x*|-y*) -+# arg=`$ECHO "X$opt" |$Xsed -e "$my_sed_single_rest"` -+# opt=`$ECHO "X$opt" |$Xsed -e "$my_sed_single_opt"` -+# set dummy "$opt" "$arg" ${1+"$@"} -+# shift -+# ;; -+ -+ # Separate non-argument short options: -+# -z*|-z*|-y*) -+# rest=`$ECHO "X$opt" |$Xsed -e "$my_sed_single_rest"` -+# opt=`$ECHO "X$opt" |$Xsed -e "$my_sed_single_opt"` -+# set dummy "$opt" "-$rest" ${1+"$@"} -+# shift -+# ;; -+ - -\?|-h) func_usage ;; - --help) opt_help=: ;; - --version) func_version ;; -@@ -941,6 +992,7 @@ Otherwise, only FILE itself is deleted u - # anything was wrong. - $exit_cmd $EXIT_FAILURE - } -+# TEST SUITE MARKER ## BEGIN SOURCABLE - - # func_check_version_match - # Ensure that we are using m4 macros, and libtool script from the same -@@ -978,38 +1030,6 @@ _LT_EOF - } - - --## ----------- ## --## Main. ## --## ----------- ## -- --{ -- # Sanity checks first: -- func_check_version_match -- -- if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then -- func_fatal_configuration "not configured to build any kind of library" -- fi -- -- test -z "$mode" && func_fatal_error "error: you must specify a MODE." -- -- -- # Darwin sucks -- eval std_shrext=\"$shrext_cmds\" -- -- -- # Only execute mode is allowed to have -dlopen flags. -- if test -n "$execute_dlfiles" && test "$mode" != execute; then -- func_error "unrecognized option \`-dlopen'" -- $ECHO "$help" 1>&2 -- exit $EXIT_FAILURE -- fi -- -- # Change the help message to a mode-specific one. -- generic_help="$help" -- help="Try \`$progname --help --mode=$mode' for more information." --} -- -- - # func_lalib_p file - # True iff FILE is a libtool `.la' library or `.lo' object file. - # This function is only a basic sanity check; it will hardly flush out -@@ -1086,6 +1106,9 @@ func_source () - } - - -+# Generated shell functions inserted here. -+ -+ - # func_win32_libid arg - # return the library type of file 'arg' - # -@@ -1105,14 +1128,7 @@ func_win32_libid () - if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | - $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then - win32_nmres=`eval $NM -f posix -A $1 | -- $SED -n -e ' -- 1,100{ -- / I /{ -- s,.*,import, -- p -- q -- } -- }'` -+ $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'` - case $win32_nmres in - import*) win32_libid_type="x86 archive import";; - *) win32_libid_type="x86 archive static";; -@@ -1332,33 +1348,31 @@ extern \"C\" { - $ECHO >> "$output_objdir/$my_dlsyms" "\ - - /* The mapping between symbol names and symbols. */ --typedef struct { -- const char *name; -- void *address; --} lt_dlsymlist; - " - case $host in - *cygwin* | *mingw* ) - $ECHO >> "$output_objdir/$my_dlsyms" "\ - /* DATA imports from DLLs on WIN32 con't be const, because - runtime relocations are performed -- see ld's documentation -- on pseudo-relocs. */" -- lt_dlsym_const= ;; -- *osf5*) -- echo >> "$output_objdir/$my_dlsyms" "\ --/* This system does not cope well with relocations in const data */" -- lt_dlsym_const= ;; -+ on pseudo-relocs. */ -+ struct { -+" -+ ;; - *) -- lt_dlsym_const=const ;; -+ $ECHO >> "$output_objdir/$my_dlsyms" "\ -+const struct { -+" -+ ;; - esac - - $ECHO >> "$output_objdir/$my_dlsyms" "\ --extern $lt_dlsym_const lt_dlsymlist --lt_${my_prefix}_LTX_preloaded_symbols[]; --$lt_dlsym_const lt_dlsymlist -+ const char *name; -+ void *address; -+} - lt_${my_prefix}_LTX_preloaded_symbols[] = - {\ -- { \"$my_originator\", (void *) 0 }," -+ { \"$my_originator\", (void *) 0 }, -+" - - eval "$global_symbol_to_c_name_address" < "$nlist" >> "$output_objdir/$my_dlsyms" - -@@ -1482,17 +1496,7 @@ func_extract_archives () - esac - func_basename "$my_xlib" - my_xlib="$func_basename_result" -- my_xlib_u=$my_xlib -- while :; do -- case " $extracted_archives " in -- *" $my_xlib_u "*) -- extracted_serial=`expr $extracted_serial + 1` -- my_xlib_u=lt$extracted_serial-$my_xlib ;; -- *) break ;; -- esac -- done -- extracted_archives="$extracted_archives $my_xlib_u" -- my_xdir="$my_gentop/$my_xlib_u" -+ my_xdir="$my_gentop/$my_xlib" - - func_mkdir_p "$my_xdir" - -@@ -1546,44 +1550,6 @@ func_extract_archives () - } - - -- --# func_write_libtool_object output_name pic_name nonpic_name --# Create a libtool object file (analogous to a ".la" file), --# but don't create it if we're doing a dry run. --func_write_libtool_object () --{ -- write_libobj=${1} -- if test "$build_libtool_libs" = yes; then -- write_lobj=\'${2}\' -- else -- write_lobj=none -- fi -- -- if test "$build_old_libs" = yes; then -- write_oldobj=\'${3}\' -- else -- write_oldobj=none -- fi -- -- $opt_dry_run || { -- cat >${write_libobj}T < ${libobj}T <> ${libobj}T <> ${libobj}T <> ${libobj}T <> ${libobj}T </dev/null 2>&1; then -- emulate sh -- NULLCMD=: -- # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which -- # is contrary to our usage. Disable this feature. -- alias -g '\${1+\"\$@\"}'='\"\$@\"' -- setopt NO_GLOB_SUBST --else -- case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac --fi --BIN_SH=xpg4; export BIN_SH # for Tru64 --DUALCASE=1; export DUALCASE # for MKS sh -+ avoid_version=no -+ dlfiles= -+ dlprefiles= -+ dlself=no -+ export_dynamic=no -+ export_symbols= -+ export_symbols_regex= -+ generated= -+ libobjs= -+ ltlibs= -+ module=no -+ no_install=no -+ objs= -+ non_pic_objects= -+ precious_files_regex= -+ prefer_static_libs=no -+ preload=no -+ prev= -+ prevarg= -+ release= -+ rpath= -+ xrpath= -+ perm_rpath= -+ temp_rpath= -+ thread_safe=no -+ vinfo= -+ vinfo_number=no -+ weak_libs= -+ single_module="${wl}-single_module" -+ func_infer_tag $base_compile - --# The HP-UX ksh and POSIX shell print the target directory to stdout --# if CDPATH is set. --(unset CDPATH) >/dev/null 2>&1 && unset CDPATH -+ # We need to know -static, to get the right output filenames. -+ for arg -+ do -+ case $arg in -+ -shared) -+ test "$build_libtool_libs" != yes && \ -+ func_fatal_configuration "can not build a shared library" -+ build_old_libs=no -+ break -+ ;; -+ -all-static | -static) -+ if test "X$arg" = "X-all-static"; then -+ if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then -+ func_warning "complete static linking is impossible in this configuration" -+ fi -+ if test -n "$link_static_flag"; then -+ dlopen_self=$dlopen_self_static -+ # See comment for -static flag below, for more details. -+ compile_command="$compile_command $link_static_flag" -+ finalize_command="$finalize_command $link_static_flag" -+ fi -+ prefer_static_libs=yes -+ else -+ if test -z "$pic_flag" && test -n "$link_static_flag"; then -+ dlopen_self=$dlopen_self_static -+ fi -+ prefer_static_libs=built -+ fi -+ build_libtool_libs=no -+ build_old_libs=yes -+ break -+ ;; -+ esac -+ done - --relink_command=\"$relink_command\" -+ # See if our shared archives depend on static archives. -+ test -n "$old_archive_from_new_cmds" && build_old_libs=yes - --# This environment variable determines our operation mode. --if test \"\$libtool_install_magic\" = \"$magic\"; then -- # install mode needs the following variables: -- generated_by_libtool_version='$macro_version' -- notinst_deplibs='$notinst_deplibs' --else -- # When we are sourced in execute mode, \$file and \$ECHO are already set. -- if test \"\$libtool_execute_magic\" != \"$magic\"; then -- ECHO=\"$qecho\" -- file=\"\$0\" -- # Make sure echo works. -- if test \"X\$1\" = X--no-reexec; then -- # Discard the --no-reexec flag, and continue. -+ # Go through the arguments, transforming them on the way. -+ while test "$#" -gt 0; do -+ arg="$1" - shift -- elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then -- # Yippee, \$ECHO works! -- : -- else -- # Restart under the correct shell, and then maybe \$ECHO will work. -- exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} -- fi -- fi\ --" -- $ECHO "\ -- -- # Find the directory that this script lives in. -- thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` -- test \"x\$thisdir\" = \"x\$file\" && thisdir=. -- -- # Follow symbolic links until we get to the real thisdir. -- file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` -- while test -n \"\$file\"; do -- destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` -- -- # If there was a directory component, then change thisdir. -- if test \"x\$destdir\" != \"x\$file\"; then -- case \"\$destdir\" in -- [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; -- *) thisdir=\"\$thisdir/\$destdir\" ;; -- esac -- fi -- -- file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` -- file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` -- done -- -- # Try to get the absolute directory name. -- absdir=\`cd \"\$thisdir\" && pwd\` -- test -n \"\$absdir\" && thisdir=\"\$absdir\" --" -- -- if test "$fast_install" = yes; then -- $ECHO "\ -- program=lt-'$outputname'$exeext -- progdir=\"\$thisdir/$objdir\" -+ func_quote_for_eval "$arg" -+ qarg="$func_quote_for_eval_unquoted_result" -+ libtool_args="$libtool_args $func_quote_for_eval_result" - -- if test ! -f \"\$progdir/\$program\" || -- { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ -- test \"X\$file\" != \"X\$progdir/\$program\"; }; then -+ # If the previous option needs an argument, assign it. -+ if test -n "$prev"; then -+ case $prev in -+ output) -+ compile_command="$compile_command @OUTPUT@" -+ finalize_command="$finalize_command @OUTPUT@" -+ ;; -+ esac - -- file=\"\$\$-\$program\" -+ case $prev in -+ dlfiles|dlprefiles) -+ if test "$preload" = no; then -+ # Add the symbol object into the linking commands. -+ compile_command="$compile_command @SYMFILE@" -+ finalize_command="$finalize_command @SYMFILE@" -+ preload=yes -+ fi -+ case $arg in -+ *.la | *.lo) ;; # We handle these cases below. -+ force) -+ if test "$dlself" = no; then -+ dlself=needless -+ export_dynamic=yes -+ fi -+ prev= -+ continue -+ ;; -+ self) -+ if test "$prev" = dlprefiles; then -+ dlself=yes -+ elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then -+ dlself=yes -+ else -+ dlself=needless -+ export_dynamic=yes -+ fi -+ prev= -+ continue -+ ;; -+ *) -+ if test "$prev" = dlfiles; then -+ dlfiles="$dlfiles $arg" -+ else -+ dlprefiles="$dlprefiles $arg" -+ fi -+ prev= -+ continue -+ ;; -+ esac -+ ;; -+ expsyms) -+ export_symbols="$arg" -+ test -f "$arg" \ -+ || func_fatal_error "symbol file \`$arg' does not exist" -+ prev= -+ continue -+ ;; -+ expsyms_regex) -+ export_symbols_regex="$arg" -+ prev= -+ continue -+ ;; -+ framework) -+ case $host in -+ *-*-darwin*) -+ case "$deplibs " in -+ *" $qarg.ltframework "*) ;; -+ *) deplibs="$deplibs $qarg.ltframework" # this is fixed later -+ ;; -+ esac -+ ;; -+ esac -+ prev= -+ continue -+ ;; -+ inst_prefix) -+ inst_prefix_dir="$arg" -+ prev= -+ continue -+ ;; -+ objectlist) -+ if test -f "$arg"; then -+ save_arg=$arg -+ moreargs= -+ for fil in `cat "$save_arg"` -+ do -+# moreargs="$moreargs $fil" -+ arg=$fil -+ # A libtool-controlled object. - -- if test ! -d \"\$progdir\"; then -- $MKDIR \"\$progdir\" -- else -- $RM \"\$progdir/\$file\" -- fi" -+ # Check to see that this really is a libtool object. -+ if func_lalib_unsafe_p "$arg"; then -+ pic_object= -+ non_pic_object= - -- $ECHO "\ -+ # Read the .lo file -+ func_source "$arg" - -- # relink executable if necessary -- if test -n \"\$relink_command\"; then -- if relink_command_output=\`eval \$relink_command 2>&1\`; then : -- else -- $ECHO \"\$relink_command_output\" >&2 -- $RM \"\$progdir/\$file\" -- exit 1 -- fi -- fi -+ if test -z "$pic_object" || -+ test -z "$non_pic_object" || -+ test "$pic_object" = none && -+ test "$non_pic_object" = none; then -+ func_fatal_error "cannot find name of object for \`$arg'" -+ fi - -- $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || -- { $RM \"\$progdir/\$program\"; -- $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } -- $RM \"\$progdir/\$file\" -- fi" -- else -- $ECHO "\ -- program='$outputname' -- progdir=\"\$thisdir/$objdir\" --" -- fi -+ # Extract subdirectory from the argument. -+ func_dirname "$arg" "/" "" -+ xdir="$func_dirname_result" - -- $ECHO "\ -+ if test "$pic_object" != none; then -+ # Prepend the subdirectory the object is found in. -+ pic_object="$xdir$pic_object" - -- if test -f \"\$progdir/\$program\"; then" -+ if test "$prev" = dlfiles; then -+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then -+ dlfiles="$dlfiles $pic_object" -+ prev= -+ continue -+ else -+ # If libtool objects are unsupported, then we need to preload. -+ prev=dlprefiles -+ fi -+ fi - -- # Export our shlibpath_var if we have one. -- if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then -- $ECHO "\ -- # Add our own library path to $shlibpath_var -- $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" -+ # CHECK ME: I think I busted this. -Ossama -+ if test "$prev" = dlprefiles; then -+ # Preload the old-style object. -+ dlprefiles="$dlprefiles $pic_object" -+ prev= -+ fi - -- # Some systems cannot cope with colon-terminated $shlibpath_var -- # The second colon is a workaround for a bug in BeOS R4 sed -- $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` -+ # A PIC object. -+ libobjs="$libobjs $pic_object" -+ arg="$pic_object" -+ fi - -- export $shlibpath_var --" -- fi -+ # Non-PIC object. -+ if test "$non_pic_object" != none; then -+ # Prepend the subdirectory the object is found in. -+ non_pic_object="$xdir$non_pic_object" - -- # fixup the dll searchpath if we need to. -- if test -n "$dllsearchpath"; then -- $ECHO "\ -- # Add the dll search path components to the executable PATH -- PATH=$dllsearchpath:\$PATH --" -- fi -+ # A standard non-PIC object -+ non_pic_objects="$non_pic_objects $non_pic_object" -+ if test -z "$pic_object" || test "$pic_object" = none ; then -+ arg="$non_pic_object" -+ fi -+ else -+ # If the PIC object exists, use it instead. -+ # $xdir was prepended to $pic_object above. -+ non_pic_object="$pic_object" -+ non_pic_objects="$non_pic_objects $non_pic_object" -+ fi -+ else -+ # Only an error if not doing a dry-run. -+ if $opt_dry_run; then -+ # Extract subdirectory from the argument. -+ func_dirname "$arg" "/" "" -+ xdir="$func_dirname_result" - -- $ECHO "\ -- if test \"\$libtool_execute_magic\" != \"$magic\"; then -- # Run the actual program with our arguments. --" -- case $host in -- # Backslashes separate directories on plain windows -- *-*-mingw | *-*-os2*) -- $ECHO "\ -- exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} --" -+ pic_object=`$ECHO "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` -+ non_pic_object=`$ECHO "X${xdir}${arg}" | $Xsed -e "$lo2o"` -+ libobjs="$libobjs $pic_object" -+ non_pic_objects="$non_pic_objects $non_pic_object" -+ else -+ func_fatal_error "\`$arg' is not a valid libtool object" -+ fi -+ fi -+ done -+ else -+ func_fatal_error "link input file \`$arg' does not exist" -+ fi -+ arg=$save_arg -+ prev= -+ continue -+ ;; -+ precious_regex) -+ precious_files_regex="$arg" -+ prev= -+ continue -+ ;; -+ release) -+ release="-$arg" -+ prev= -+ continue -+ ;; -+ rpath | xrpath) -+ # We need an absolute path. -+ case $arg in -+ [\\/]* | [A-Za-z]:[\\/]*) ;; -+ *) -+ func_fatal_error "only absolute run-paths are allowed" -+ ;; -+ esac -+ if test "$prev" = rpath; then -+ case "$rpath " in -+ *" $arg "*) ;; -+ *) rpath="$rpath $arg" ;; -+ esac -+ else -+ case "$xrpath " in -+ *" $arg "*) ;; -+ *) xrpath="$xrpath $arg" ;; -+ esac -+ fi -+ prev= -+ continue -+ ;; -+ shrext) -+ shrext_cmds="$arg" -+ prev= -+ continue -+ ;; -+ weak) -+ weak_libs="$weak_libs $arg" -+ prev= -+ continue -+ ;; -+ xcclinker) -+ linker_flags="$linker_flags $qarg" -+ compiler_flags="$compiler_flags $qarg" -+ prev= -+ compile_command="$compile_command $qarg" -+ finalize_command="$finalize_command $qarg" -+ continue -+ ;; -+ xcompiler) -+ compiler_flags="$compiler_flags $qarg" -+ prev= -+ compile_command="$compile_command $qarg" -+ finalize_command="$finalize_command $qarg" -+ continue -+ ;; -+ xlinker) -+ linker_flags="$linker_flags $qarg" -+ compiler_flags="$compiler_flags $wl$qarg" -+ prev= -+ compile_command="$compile_command $wl$qarg" -+ finalize_command="$finalize_command $wl$qarg" -+ continue - ;; -- - *) -- $ECHO "\ -- exec \"\$progdir/\$program\" \${1+\"\$@\"} --" -+ eval "$prev=\"\$arg\"" -+ prev= -+ continue - ;; - esac -- $ECHO "\ -- \$ECHO \"\$0: cannot exec \$program \$*\" -- exit 1 -- fi -- else -- # The program doesn't exist. -- \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 -- \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 -- $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 -- exit 1 -- fi --fi\ --" --} --# end: func_emit_libtool_wrapper_script -- --# func_emit_libtool_cwrapperexe_source --# emit the source code for a wrapper executable on stdout --# Must ONLY be called from within func_mode_link because --# it depends on a number of variable set therein. --func_emit_libtool_cwrapperexe_source () --{ -- cat < --#include --#include --#include --#include --#include --#include --#include --#include -+ fi # test -n "$prev" - --#if defined(PATH_MAX) --# define LT_PATHMAX PATH_MAX --#elif defined(MAXPATHLEN) --# define LT_PATHMAX MAXPATHLEN --#else --# define LT_PATHMAX 1024 --#endif -+ prevarg="$arg" - --#ifndef DIR_SEPARATOR --# define DIR_SEPARATOR '/' --# define PATH_SEPARATOR ':' --#endif -+ case $arg in -+ -all-static) -+ # The effects of -all-static are defined in a previous loop. -+ continue -+ ;; - --#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ -- defined (__OS2__) --# define HAVE_DOS_BASED_FILE_SYSTEM --# ifndef DIR_SEPARATOR_2 --# define DIR_SEPARATOR_2 '\\' --# endif --# ifndef PATH_SEPARATOR_2 --# define PATH_SEPARATOR_2 ';' --# endif --#endif -+ -allow-undefined) -+ # FIXME: remove this flag sometime in the future. -+ func_fatal_error "\`-allow-undefined' must not be used because it is the default" -+ ;; - --#ifndef DIR_SEPARATOR_2 --# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) --#else /* DIR_SEPARATOR_2 */ --# define IS_DIR_SEPARATOR(ch) \ -- (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) --#endif /* DIR_SEPARATOR_2 */ -+ -avoid-version) -+ avoid_version=yes -+ continue -+ ;; - --#ifndef PATH_SEPARATOR_2 --# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) --#else /* PATH_SEPARATOR_2 */ --# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) --#endif /* PATH_SEPARATOR_2 */ -+ -dlopen) -+ prev=dlfiles -+ continue -+ ;; - --#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) --#define XFREE(stale) do { \ -- if (stale) { free ((void *) stale); stale = 0; } \ --} while (0) -+ -dlpreopen) -+ prev=dlprefiles -+ continue -+ ;; - --/* -DDEBUG is fairly common in CFLAGS. */ --#undef DEBUG --#if defined DEBUGWRAPPER --# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) --#else --# define DEBUG(format, ...) --#endif -+ -export-dynamic) -+ export_dynamic=yes -+ continue -+ ;; - --const char *program_name = NULL; -+ -export-symbols | -export-symbols-regex) -+ if test -n "$export_symbols" || test -n "$export_symbols_regex"; then -+ func_fatal_error "more than one -exported-symbols argument is not allowed" -+ fi -+ if test "X$arg" = "X-export-symbols"; then -+ prev=expsyms -+ else -+ prev=expsyms_regex -+ fi -+ continue -+ ;; - --void * xmalloc (size_t num); --char * xstrdup (const char *string); --const char * base_name (const char *name); --char * find_executable(const char *wrapper); --int check_executable(const char *path); --char * strendzap(char *str, const char *pat); --void lt_fatal (const char *message, ...); -+ -framework) -+ prev=framework -+ continue -+ ;; - --int --main (int argc, char *argv[]) --{ -- char **newargz; -- int i; -+ -inst-prefix-dir) -+ prev=inst_prefix -+ continue -+ ;; - -- program_name = (char *) xstrdup (base_name (argv[0])); -- DEBUG("(main) argv[0] : %s\n",argv[0]); -- DEBUG("(main) program_name : %s\n",program_name); -- newargz = XMALLOC(char *, argc+2); --EOF -+ # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* -+ # so, if we see these flags be careful not to treat them like -L -+ -L[A-Z][A-Z]*:*) -+ case $with_gcc/$host in -+ no/*-*-irix* | /*-*-irix*) -+ compile_command="$compile_command $arg" -+ finalize_command="$finalize_command $arg" -+ ;; -+ esac -+ continue -+ ;; - -- cat <= 0) && -- ( -- /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ --#if defined (S_IXOTH) -- ((st.st_mode & S_IXOTH) == S_IXOTH) || --#endif --#if defined (S_IXGRP) -- ((st.st_mode & S_IXGRP) == S_IXGRP) || --#endif -- ((st.st_mode & S_IXUSR) == S_IXUSR)) -- ) -- return 1; -- else -- return 0; --} -+ -R) -+ prev=xrpath -+ continue -+ ;; - --/* Searches for the full path of the wrapper. Returns -- newly allocated full path name if found, NULL otherwise */ --char * --find_executable (const char* wrapper) --{ -- int has_slash = 0; -- const char* p; -- const char* p_next; -- /* static buffer for getcwd */ -- char tmp[LT_PATHMAX + 1]; -- int tmp_len; -- char* concat_name; -+ -R*) -+ func_stripname '-R' '' "$arg" -+ dir=$func_stripname_result -+ # We need an absolute path. -+ case $dir in -+ [\\/]* | [A-Za-z]:[\\/]*) ;; -+ *) -+ func_fatal_error "only absolute run-paths are allowed" -+ ;; -+ esac -+ case "$xrpath " in -+ *" $dir "*) ;; -+ *) xrpath="$xrpath $dir" ;; -+ esac -+ continue -+ ;; - -- DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); -+ -shared) -+ # The effects of -shared are defined in a previous loop. -+ continue -+ ;; - -- if ((wrapper == NULL) || (*wrapper == '\0')) -- return NULL; -+ -shrext) -+ prev=shrext -+ continue -+ ;; - -- /* Absolute path? */ --#if defined (HAVE_DOS_BASED_FILE_SYSTEM) -- if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') -- { -- concat_name = xstrdup (wrapper); -- if (check_executable(concat_name)) -- return concat_name; -- XFREE(concat_name); -- } -- else -- { --#endif -- if (IS_DIR_SEPARATOR (wrapper[0])) -- { -- concat_name = xstrdup (wrapper); -- if (check_executable(concat_name)) -- return concat_name; -- XFREE(concat_name); -- } --#if defined (HAVE_DOS_BASED_FILE_SYSTEM) -- } --#endif -+ -static) -+ # The effects of -static are defined in a previous loop. -+ # We used to do the same as -all-static on platforms that -+ # didn't have a PIC flag, but the assumption that the effects -+ # would be equivalent was wrong. It would break on at least -+ # Digital Unix and AIX. -+ continue -+ ;; - -- for (p = wrapper; *p; p++) -- if (*p == '/') -- { -- has_slash = 1; -- break; -- } -- if (!has_slash) -- { -- /* no slashes; search PATH */ -- const char* path = getenv ("PATH"); -- if (path != NULL) -- { -- for (p = path; *p; p = p_next) -- { -- const char* q; -- size_t p_len; -- for (q = p; *q; q++) -- if (IS_PATH_SEPARATOR(*q)) -- break; -- p_len = q - p; -- p_next = (*q == '\0' ? q : q + 1); -- if (p_len == 0) -- { -- /* empty path: current directory */ -- if (getcwd (tmp, LT_PATHMAX) == NULL) -- lt_fatal ("getcwd failed"); -- tmp_len = strlen(tmp); -- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); -- memcpy (concat_name, tmp, tmp_len); -- concat_name[tmp_len] = '/'; -- strcpy (concat_name + tmp_len + 1, wrapper); -- } -- else -- { -- concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); -- memcpy (concat_name, p, p_len); -- concat_name[p_len] = '/'; -- strcpy (concat_name + p_len + 1, wrapper); -- } -- if (check_executable(concat_name)) -- return concat_name; -- XFREE(concat_name); -- } -- } -- /* not found in PATH; assume curdir */ -- } -- /* Relative path | not found in path: prepend cwd */ -- if (getcwd (tmp, LT_PATHMAX) == NULL) -- lt_fatal ("getcwd failed"); -- tmp_len = strlen(tmp); -- concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); -- memcpy (concat_name, tmp, tmp_len); -- concat_name[tmp_len] = '/'; -- strcpy (concat_name + tmp_len + 1, wrapper); -+ -thread-safe) -+ thread_safe=yes -+ continue -+ ;; - -- if (check_executable(concat_name)) -- return concat_name; -- XFREE(concat_name); -- return NULL; --} -+ -version-info) -+ prev=vinfo -+ continue -+ ;; - --char * --strendzap(char *str, const char *pat) --{ -- size_t len, patlen; -+ -version-number) -+ prev=vinfo -+ vinfo_number=yes -+ continue -+ ;; - -- assert(str != NULL); -- assert(pat != NULL); -+ -weak) -+ prev=weak -+ continue -+ ;; - -- len = strlen(str); -- patlen = strlen(pat); -+ -Wc,*) -+ func_stripname '-Wc,' '' "$arg" -+ args=$func_stripname_result -+ arg= -+ save_ifs="$IFS"; IFS=',' -+ for flag in $args; do -+ IFS="$save_ifs" -+ func_quote_for_eval "$flag" -+ arg="$arg $wl$func_quote_for_eval_result" -+ compiler_flags="$compiler_flags $func_quote_for_eval_result" -+ done -+ IFS="$save_ifs" -+ func_stripname ' ' '' "$arg" -+ arg=$func_stripname_result -+ ;; - -- if (patlen <= len) -- { -- str += len - patlen; -- if (strcmp(str, pat) == 0) -- *str = '\0'; -- } -- return str; --} -+ -Wl,*) -+ func_stripname '-Wl,' '' "$arg" -+ args=$func_stripname_result -+ arg= -+ save_ifs="$IFS"; IFS=',' -+ for flag in $args; do -+ IFS="$save_ifs" -+ func_quote_for_eval "$flag" -+ arg="$arg $wl$func_quote_for_eval_result" -+ compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" -+ linker_flags="$linker_flags $func_quote_for_eval_result" -+ done -+ IFS="$save_ifs" -+ func_stripname ' ' '' "$arg" -+ arg=$func_stripname_result -+ ;; - --static void --lt_error_core (int exit_status, const char * mode, -- const char * message, va_list ap) --{ -- fprintf (stderr, "%s: %s: ", program_name, mode); -- vfprintf (stderr, message, ap); -- fprintf (stderr, ".\n"); -+ -Xcompiler) -+ prev=xcompiler -+ continue -+ ;; - -- if (exit_status >= 0) -- exit (exit_status); --} -+ -Xlinker) -+ prev=xlinker -+ continue -+ ;; - --void --lt_fatal (const char *message, ...) --{ -- va_list ap; -- va_start (ap, message); -- lt_error_core (EXIT_FAILURE, "FATAL", message, ap); -- va_end (ap); --} --EOF --} --# end: func_emit_libtool_cwrapperexe_source -+ -XCClinker) -+ prev=xcclinker -+ continue -+ ;; - --# func_mode_link arg... --func_mode_link () --{ -- $opt_debug -- case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -- # It is impossible to link a dll without this setting, and -- # we shouldn't force the makefile maintainer to figure out -- # which system we are compiling for in order to pass an extra -- # flag for every libtool invocation. -- # allow_undefined=no -+ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler -+ # -r[0-9][0-9]* specifies the processor on the SGI compiler -+ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler -+ # +DA*, +DD* enable 64-bit mode on the HP compiler -+ # -q* pass through compiler args for the IBM compiler -+ # -m*, -t[45]*, -txscale* pass through architecture-specific -+ # compiler args for GCC -+ # @file GCC response files -+ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -+ -t[45]*|-txscale*|@*) -+ func_quote_for_eval "$arg" -+ arg="$func_quote_for_eval_result" -+ compile_command="$compile_command $arg" -+ finalize_command="$finalize_command $arg" -+ compiler_flags="$compiler_flags $arg" -+ continue -+ ;; - -- # FIXME: Unfortunately, there are problems with the above when trying -- # to make a dll which has undefined symbols, in which case not -- # even a static library is built. For now, we need to specify -- # -no-undefined on the libtool link line when we can be certain -- # that all symbols are satisfied, otherwise we get a static library. -- allow_undefined=yes -- ;; -- *) -- allow_undefined=yes -- ;; -- esac -- libtool_args=$nonopt -- base_compile="$nonopt $@" -- compile_command=$nonopt -- finalize_command=$nonopt -+ # Some other compiler flag. -+ -* | +*) -+ func_quote_for_eval "$arg" -+ arg="$func_quote_for_eval_result" -+ ;; - -- compile_rpath= -- finalize_rpath= -- compile_shlibpath= -- finalize_shlibpath= -- convenience= -- old_convenience= -- deplibs= -- old_deplibs= -- compiler_flags= -- linker_flags= -- dllsearchpath= -- lib_search_path=`pwd` -- inst_prefix_dir= -- new_inherited_linker_flags= -+ *.$objext) -+ # A standard object. -+ objs="$objs $arg" -+ ;; - -- avoid_version=no -- dlfiles= -- dlprefiles= -- dlself=no -- export_dynamic=no -- export_symbols= -- export_symbols_regex= -- generated= -- libobjs= -- ltlibs= -- module=no -- no_install=no -- objs= -- non_pic_objects= -- precious_files_regex= -- prefer_static_libs=no -- preload=no -- prev= -- prevarg= -- release= -- rpath= -- xrpath= -- perm_rpath= -- temp_rpath= -- thread_safe=no -- vinfo= -- vinfo_number=no -- weak_libs= -- single_module="${wl}-single_module" -- func_infer_tag $base_compile -+ *.lo) -+ # A libtool-controlled object. - -- # We need to know -static, to get the right output filenames. -- for arg -- do -- case $arg in -- -shared) -- test "$build_libtool_libs" != yes && \ -- func_fatal_configuration "can not build a shared library" -- build_old_libs=no -- break -- ;; -- -all-static | -static | -static-libtool-libs) -- case $arg in -- -all-static) -- if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then -- func_warning "complete static linking is impossible in this configuration" -- fi -- if test -n "$link_static_flag"; then -- dlopen_self=$dlopen_self_static -- # See comment for -static flag below, for more details. -- func_append compile_command " $link_static_flag" -- func_append finalize_command " $link_static_flag" -- fi -- prefer_static_libs=yes -- ;; -- -static) -- if test -z "$pic_flag" && test -n "$link_static_flag"; then -- dlopen_self=$dlopen_self_static -- fi -- prefer_static_libs=built -- ;; -- -static-libtool-libs) -- if test -z "$pic_flag" && test -n "$link_static_flag"; then -- dlopen_self=$dlopen_self_static -- fi -- prefer_static_libs=yes -- ;; -- esac -- build_libtool_libs=no -- build_old_libs=yes -- break -- ;; -- esac -- done -+ # Check to see that this really is a libtool object. -+ if func_lalib_unsafe_p "$arg"; then -+ pic_object= -+ non_pic_object= - -- # See if our shared archives depend on static archives. -- test -n "$old_archive_from_new_cmds" && build_old_libs=yes -+ # Read the .lo file -+ func_source "$arg" - -- # Go through the arguments, transforming them on the way. -- while test "$#" -gt 0; do -- arg="$1" -- shift -- func_quote_for_eval "$arg" -- qarg=$func_quote_for_eval_unquoted_result -- func_append libtool_args " $func_quote_for_eval_result" -+ if test -z "$pic_object" || -+ test -z "$non_pic_object" || -+ test "$pic_object" = none && -+ test "$non_pic_object" = none; then -+ func_fatal_error "cannot find name of object for \`$arg'" -+ fi - -- # If the previous option needs an argument, assign it. -- if test -n "$prev"; then -- case $prev in -- output) -- func_append compile_command " @OUTPUT@" -- func_append finalize_command " @OUTPUT@" -- ;; -- esac -+ # Extract subdirectory from the argument. -+ func_dirname "$arg" "/" "" -+ xdir="$func_dirname_result" - -- case $prev in -- dlfiles|dlprefiles) -- if test "$preload" = no; then -- # Add the symbol object into the linking commands. -- func_append compile_command " @SYMFILE@" -- func_append finalize_command " @SYMFILE@" -- preload=yes -- fi -- case $arg in -- *.la | *.lo) ;; # We handle these cases below. -- force) -- if test "$dlself" = no; then -- dlself=needless -- export_dynamic=yes -+ if test "$pic_object" != none; then -+ # Prepend the subdirectory the object is found in. -+ pic_object="$xdir$pic_object" -+ -+ if test "$prev" = dlfiles; then -+ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then -+ dlfiles="$dlfiles $pic_object" -+ prev= -+ continue -+ else -+ # If libtool objects are unsupported, then we need to preload. -+ prev=dlprefiles -+ fi - fi -- prev= -- continue -- ;; -- self) -+ -+ # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then -- dlself=yes -- elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then -- dlself=yes -- else -- dlself=needless -- export_dynamic=yes -+ # Preload the old-style object. -+ dlprefiles="$dlprefiles $pic_object" -+ prev= - fi -- prev= -- continue -- ;; -- *) -- if test "$prev" = dlfiles; then -- dlfiles="$dlfiles $arg" -- else -- dlprefiles="$dlprefiles $arg" -+ -+ # A PIC object. -+ libobjs="$libobjs $pic_object" -+ arg="$pic_object" -+ fi -+ -+ # Non-PIC object. -+ if test "$non_pic_object" != none; then -+ # Prepend the subdirectory the object is found in. -+ non_pic_object="$xdir$non_pic_object" -+ -+ # A standard non-PIC object -+ non_pic_objects="$non_pic_objects $non_pic_object" -+ if test -z "$pic_object" || test "$pic_object" = none ; then -+ arg="$non_pic_object" - fi -- prev= -- continue -- ;; -- esac -- ;; -- expsyms) -- export_symbols="$arg" -- test -f "$arg" \ -- || func_fatal_error "symbol file \`$arg' does not exist" -- prev= -- continue -- ;; -- expsyms_regex) -- export_symbols_regex="$arg" -- prev= -- continue -- ;; -- framework) -- case $host in -- *-*-darwin*) -- case "$deplibs " in -- *" $qarg.ltframework "*) ;; -- *) deplibs="$deplibs $qarg.ltframework" # this is fixed later -- ;; -- esac -- ;; -- esac -- prev= -- continue -- ;; -- inst_prefix) -- inst_prefix_dir="$arg" -- prev= -- continue -- ;; -- objectlist) -- if test -f "$arg"; then -- save_arg=$arg -- moreargs= -- for fil in `cat "$save_arg"` -- do --# moreargs="$moreargs $fil" -- arg=$fil -- # A libtool-controlled object. -+ else -+ # If the PIC object exists, use it instead. -+ # $xdir was prepended to $pic_object above. -+ non_pic_object="$pic_object" -+ non_pic_objects="$non_pic_objects $non_pic_object" -+ fi -+ else -+ # Only an error if not doing a dry-run. -+ if $opt_dry_run; then -+ # Extract subdirectory from the argument. -+ func_dirname "$arg" "/" "" -+ xdir="$func_dirname_result" - -- # Check to see that this really is a libtool object. -- if func_lalib_unsafe_p "$arg"; then -- pic_object= -- non_pic_object= -+ pic_object=`$ECHO "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` -+ non_pic_object=`$ECHO "X${xdir}${arg}" | $Xsed -e "$lo2o"` -+ libobjs="$libobjs $pic_object" -+ non_pic_objects="$non_pic_objects $non_pic_object" -+ else -+ func_fatal_error "\`$arg' is not a valid libtool object" -+ fi -+ fi -+ ;; - -- # Read the .lo file -- func_source "$arg" -+ *.$libext) -+ # An archive. -+ deplibs="$deplibs $arg" -+ old_deplibs="$old_deplibs $arg" -+ continue -+ ;; - -- if test -z "$pic_object" || -- test -z "$non_pic_object" || -- test "$pic_object" = none && -- test "$non_pic_object" = none; then -- func_fatal_error "cannot find name of object for \`$arg'" -- fi -+ *.la) -+ # A libtool-controlled library. - -- # Extract subdirectory from the argument. -- func_dirname "$arg" "/" "" -- xdir="$func_dirname_result" -+ if test "$prev" = dlfiles; then -+ # This library was specified with -dlopen. -+ dlfiles="$dlfiles $arg" -+ prev= -+ elif test "$prev" = dlprefiles; then -+ # The library was specified with -dlpreopen. -+ dlprefiles="$dlprefiles $arg" -+ prev= -+ else -+ deplibs="$deplibs $arg" -+ fi -+ continue -+ ;; - -- if test "$pic_object" != none; then -- # Prepend the subdirectory the object is found in. -- pic_object="$xdir$pic_object" -+ # Some other compiler argument. -+ *) -+ # Unknown arguments in both finalize_command and compile_command need -+ # to be aesthetically quoted because they are evaled later. -+ func_quote_for_eval "$arg" -+ arg="$func_quote_for_eval_result" -+ ;; -+ esac # arg - -- if test "$prev" = dlfiles; then -- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then -- dlfiles="$dlfiles $pic_object" -- prev= -- continue -- else -- # If libtool objects are unsupported, then we need to preload. -- prev=dlprefiles -- fi -- fi -+ # Now actually substitute the argument into the commands. -+ if test -n "$arg"; then -+ compile_command="$compile_command $arg" -+ finalize_command="$finalize_command $arg" -+ fi -+ done # argument parsing loop - -- # CHECK ME: I think I busted this. -Ossama -- if test "$prev" = dlprefiles; then -- # Preload the old-style object. -- dlprefiles="$dlprefiles $pic_object" -- prev= -- fi -+ test -n "$prev" && \ -+ func_fatal_help "the \`$prevarg' option requires an argument" - -- # A PIC object. -- func_append libobjs " $pic_object" -- arg="$pic_object" -- fi -+ if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then -+ eval arg=\"$export_dynamic_flag_spec\" -+ compile_command="$compile_command $arg" -+ finalize_command="$finalize_command $arg" -+ fi - -- # Non-PIC object. -- if test "$non_pic_object" != none; then -- # Prepend the subdirectory the object is found in. -- non_pic_object="$xdir$non_pic_object" -+ oldlibs= -+ # calculate the name of the file, without its directory -+ func_basename "$output" -+ outputname="$func_basename_result" -+ libobjs_save="$libobjs" - -- # A standard non-PIC object -- func_append non_pic_objects " $non_pic_object" -- if test -z "$pic_object" || test "$pic_object" = none ; then -- arg="$non_pic_object" -- fi -- else -- # If the PIC object exists, use it instead. -- # $xdir was prepended to $pic_object above. -- non_pic_object="$pic_object" -- func_append non_pic_objects " $non_pic_object" -- fi -- else -- # Only an error if not doing a dry-run. -- if $opt_dry_run; then -- # Extract subdirectory from the argument. -- func_dirname "$arg" "/" "" -- xdir="$func_dirname_result" -+ if test -n "$shlibpath_var"; then -+ # get the directories listed in $shlibpath_var -+ eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` -+ else -+ shlib_search_path= -+ fi -+ eval sys_lib_search_path=\"$sys_lib_search_path_spec\" -+ eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - -- func_lo2o "$arg" -- pic_object=$xdir$objdir/$func_lo2o_result -- non_pic_object=$xdir$func_lo2o_result -- func_append libobjs " $pic_object" -- func_append non_pic_objects " $non_pic_object" -- else -- func_fatal_error "\`$arg' is not a valid libtool object" -- fi -- fi -- done -- else -- func_fatal_error "link input file \`$arg' does not exist" -- fi -- arg=$save_arg -- prev= -- continue -- ;; -- precious_regex) -- precious_files_regex="$arg" -- prev= -- continue -- ;; -- release) -- release="-$arg" -- prev= -- continue -- ;; -- rpath | xrpath) -- # We need an absolute path. -- case $arg in -- [\\/]* | [A-Za-z]:[\\/]*) ;; -- *) -- func_fatal_error "only absolute run-paths are allowed" -- ;; -- esac -- if test "$prev" = rpath; then -- case "$rpath " in -- *" $arg "*) ;; -- *) rpath="$rpath $arg" ;; -- esac -- else -- case "$xrpath " in -- *" $arg "*) ;; -- *) xrpath="$xrpath $arg" ;; -- esac -- fi -- prev= -- continue -- ;; -- shrext) -- shrext_cmds="$arg" -- prev= -- continue -- ;; -- weak) -- weak_libs="$weak_libs $arg" -- prev= -- continue -- ;; -- xcclinker) -- linker_flags="$linker_flags $qarg" -- compiler_flags="$compiler_flags $qarg" -- prev= -- func_append compile_command " $qarg" -- func_append finalize_command " $qarg" -- continue -- ;; -- xcompiler) -- compiler_flags="$compiler_flags $qarg" -- prev= -- func_append compile_command " $qarg" -- func_append finalize_command " $qarg" -- continue -- ;; -- xlinker) -- linker_flags="$linker_flags $qarg" -- compiler_flags="$compiler_flags $wl$qarg" -- prev= -- func_append compile_command " $wl$qarg" -- func_append finalize_command " $wl$qarg" -- continue -- ;; -- *) -- eval "$prev=\"\$arg\"" -- prev= -- continue -- ;; -- esac -- fi # test -n "$prev" -+ func_dirname "$output" "/" "" -+ output_objdir="$func_dirname_result$objdir" -+ # Create the object directory. -+ func_mkdir_p "$output_objdir" - -- prevarg="$arg" -+ # Determine the type of output -+ case $output in -+ "") -+ func_fatal_help "you must specify an output file" -+ ;; -+ *.$libext) linkmode=oldlib ;; -+ *.lo | *.$objext) linkmode=obj ;; -+ *.la) linkmode=lib ;; -+ *) linkmode=prog ;; # Anything else should be a program. -+ esac - -- case $arg in -- -all-static) -- # The effects of -all-static are defined in a previous loop. -- continue -- ;; -+ specialdeplibs= - -- -allow-undefined) -- # FIXME: remove this flag sometime in the future. -- func_fatal_error "\`-allow-undefined' must not be used because it is the default" -- ;; -+ libs= -+ # Find all interdependent deplibs by searching for libraries -+ # that are linked more than once (e.g. -la -lb -la) -+ for deplib in $deplibs; do -+ if $opt_duplicate_deps ; then -+ case "$libs " in -+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -+ esac -+ fi -+ libs="$libs $deplib" -+ done - -- -avoid-version) -- avoid_version=yes -- continue -- ;; -+ if test "$linkmode" = lib; then -+ libs="$predeps $libs $compiler_lib_search_path $postdeps" - -- -dlopen) -- prev=dlfiles -- continue -- ;; -+ # Compute libraries that are listed more than once in $predeps -+ # $postdeps and mark them as special (i.e., whose duplicates are -+ # not to be eliminated). -+ pre_post_deps= -+ if $opt_duplicate_compiler_generated_deps; then -+ for pre_post_dep in $predeps $postdeps; do -+ case "$pre_post_deps " in -+ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; -+ esac -+ pre_post_deps="$pre_post_deps $pre_post_dep" -+ done -+ fi -+ pre_post_deps= -+ fi - -- -dlpreopen) -- prev=dlprefiles -- continue -- ;; -+ deplibs= -+ newdependency_libs= -+ newlib_search_path= -+ need_relink=no # whether we're linking any uninstalled libtool libraries -+ notinst_deplibs= # not-installed libtool libraries -+ notinst_path= # paths that contain not-installed libtool libraries - -- -export-dynamic) -- export_dynamic=yes -- continue -+ case $linkmode in -+ lib) -+ passes="conv dlpreopen link" -+ for file in $dlfiles $dlprefiles; do -+ case $file in -+ *.la) ;; -+ *) -+ func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" -+ ;; -+ esac -+ done - ;; -- -- -export-symbols | -export-symbols-regex) -- if test -n "$export_symbols" || test -n "$export_symbols_regex"; then -- func_fatal_error "more than one -exported-symbols argument is not allowed" -- fi -- if test "X$arg" = "X-export-symbols"; then -- prev=expsyms -- else -- prev=expsyms_regex -- fi -- continue -+ prog) -+ compile_deplibs= -+ finalize_deplibs= -+ alldeplibs=no -+ newdlfiles= -+ newdlprefiles= -+ passes="conv scan dlopen dlpreopen link" - ;; -- -- -framework) -- prev=framework -- continue -+ *) passes="conv" - ;; -+ esac - -- -inst-prefix-dir) -- prev=inst_prefix -- continue -- ;; -+ for pass in $passes; do -+ # The preopen pass in lib mode reverses $deplibs; put it back here -+ # so that -L comes before libs that need it for instance... -+ if test "$linkmode,$pass" = "lib,link"; then -+ ## FIXME: Find the place where the list is rebuilt in the wrong -+ ## order, and fix it there properly -+ tmp_deplibs= -+ for deplib in $deplibs; do -+ tmp_deplibs="$deplib $tmp_deplibs" -+ done -+ deplibs="$tmp_deplibs" -+ fi - -- # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* -- # so, if we see these flags be careful not to treat them like -L -- -L[A-Z][A-Z]*:*) -- case $with_gcc/$host in -- no/*-*-irix* | /*-*-irix*) -- func_append compile_command " $arg" -- func_append finalize_command " $arg" -+ if test "$linkmode,$pass" = "lib,link" || -+ test "$linkmode,$pass" = "prog,scan"; then -+ libs="$deplibs" -+ deplibs= -+ fi -+ if test "$linkmode" = prog; then -+ case $pass in -+ dlopen) libs="$dlfiles" ;; -+ dlpreopen) libs="$dlprefiles" ;; -+ link) -+ libs="$deplibs %DEPLIBS%" -+ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" - ;; - esac -- continue -- ;; -+ fi -+ if test "$linkmode,$pass" = "lib,dlpreopen"; then -+ # Collect and forward deplibs of preopened libtool libs -+ for lib in $dlprefiles; do -+ # Ignore non-libtool-libs -+ dependency_libs= -+ case $lib in -+ *.la) func_source "$lib" ;; -+ esac - -- -L*) -- func_stripname '-L' '' "$arg" -- dir=$func_stripname_result -- # We need an absolute path. -- case $dir in -- [\\/]* | [A-Za-z]:[\\/]*) ;; -- *) -- absdir=`cd "$dir" && pwd` -- test -z "$absdir" && \ -- func_fatal_error "cannot determine absolute directory name of \`$dir'" -- dir="$absdir" -- ;; -- esac -- case "$deplibs " in -- *" -L$dir "*) ;; -- *) -- deplibs="$deplibs -L$dir" -- lib_search_path="$lib_search_path $dir" -- ;; -- esac -- case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -- testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'` -- case :$dllsearchpath: in -- *":$dir:"*) ;; -- *) dllsearchpath="$dllsearchpath:$dir";; -- esac -- case :$dllsearchpath: in -- *":$testbindir:"*) ;; -- *) dllsearchpath="$dllsearchpath:$testbindir";; -- esac -- ;; -- esac -- continue -- ;; -+ # Collect preopened libtool deplibs, except any this library -+ # has declared as weak libs -+ for deplib in $dependency_libs; do -+ deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` -+ case " $weak_libs " in -+ *" $deplib_base "*) ;; -+ *) deplibs="$deplibs $deplib" ;; -+ esac -+ done -+ done -+ libs="$dlprefiles" -+ fi -+ if test "$pass" = dlopen; then -+ # Collect dlpreopened libraries -+ save_deplibs="$deplibs" -+ deplibs= -+ fi - -- -l*) -- if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then -- case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) -- # These systems don't actually have a C or math library (as such) -+ for deplib in $libs; do -+ lib= -+ found=no -+ case $deplib in -+ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) -+ if test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ compiler_flags="$compiler_flags $deplib" -+ if test "$linkmode" = lib ; then -+ case "$new_inherited_linker_flags " in -+ *" $deplib "*) ;; -+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; -+ esac -+ fi -+ fi -+ continue -+ ;; -+ -l*) -+ if test "$linkmode" != lib && test "$linkmode" != prog; then -+ func_warning "\`-l' is ignored for archives/objects" -+ continue -+ fi -+ func_stripname '-l' '' "$deplib" -+ name=$func_stripname_result -+ for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do -+ for search_ext in .la $std_shrext .so .a; do -+ # Search the libtool library -+ lib="$searchdir/lib${name}${search_ext}" -+ if test -f "$lib"; then -+ if test "$search_ext" = ".la"; then -+ found=yes -+ else -+ found=no -+ fi -+ break 2 -+ fi -+ done -+ done -+ if test "$found" != yes; then -+ # deplib doesn't seem to be a libtool library -+ if test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ deplibs="$deplib $deplibs" -+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" -+ fi - continue -+ else # deplib is a libtool library -+ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, -+ # We need to do some special things here, and not later. -+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -+ case " $predeps $postdeps " in -+ *" $deplib "*) -+ if func_lalib_p "$lib"; then -+ library_names= -+ old_library= -+ func_source "$lib" -+ for l in $old_library $library_names; do -+ ll="$l" -+ done -+ if test "X$ll" = "X$old_library" ; then # only static version available -+ found=no -+ func_dirname "$lib" "" "." -+ ladir="$func_dirname_result" -+ lib=$ladir/$old_library -+ if test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ deplibs="$deplib $deplibs" -+ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" -+ fi -+ continue -+ fi -+ fi -+ ;; -+ *) ;; -+ esac -+ fi -+ fi -+ ;; # -l -+ *.ltframework) -+ if test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ deplibs="$deplib $deplibs" -+ if test "$linkmode" = lib ; then -+ case "$new_inherited_linker_flags " in -+ *" $deplib "*) ;; -+ * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; -+ esac -+ fi -+ fi -+ continue -+ ;; -+ -L*) -+ case $linkmode in -+ lib) -+ deplibs="$deplib $deplibs" -+ test "$pass" = conv && continue -+ newdependency_libs="$deplib $newdependency_libs" -+ func_stripname '-L' '' "$deplib" -+ newlib_search_path="$newlib_search_path $func_stripname_result" - ;; -- *-*-os2*) -- # These systems don't actually have a C library (as such) -- test "X$arg" = "X-lc" && continue -+ prog) -+ if test "$pass" = conv; then -+ deplibs="$deplib $deplibs" -+ continue -+ fi -+ if test "$pass" = scan; then -+ deplibs="$deplib $deplibs" -+ else -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ fi -+ func_stripname '-L' '' "$deplib" -+ newlib_search_path="$newlib_search_path $func_stripname_result" - ;; -- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) -- # Do not include libc due to us having libc/libc_r. -- test "X$arg" = "X-lc" && continue -+ *) -+ func_warning "\`-L' is ignored for archives/objects" - ;; -- *-*-rhapsody* | *-*-darwin1.[012]) -- # Rhapsody C and math libraries are in the System framework -- deplibs="$deplibs System.ltframework" -+ esac # linkmode -+ continue -+ ;; # -L -+ -R*) -+ if test "$pass" = link; then -+ func_stripname '-R' '' "$deplib" -+ dir=$func_stripname_result -+ # Make sure the xrpath contains only unique directories. -+ case "$xrpath " in -+ *" $dir "*) ;; -+ *) xrpath="$xrpath $dir" ;; -+ esac -+ fi -+ deplibs="$deplib $deplibs" -+ continue -+ ;; -+ *.la) lib="$deplib" ;; -+ *.$libext) -+ if test "$pass" = conv; then -+ deplibs="$deplib $deplibs" -+ continue -+ fi -+ case $linkmode in -+ lib) -+ # Linking convenience modules into shared libraries is allowed, -+ # but linking other static libraries is non-portable. -+ case " $dlpreconveniencelibs " in -+ *" $lib "*) ;; -+ *) -+ valid_a_lib=no -+ case $deplibs_check_method in -+ match_pattern*) -+ set dummy $deplibs_check_method; shift -+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` -+ if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ -+ | $EGREP "$match_pattern_regex" > /dev/null; then -+ valid_a_lib=yes -+ fi -+ ;; -+ pass_all) -+ valid_a_lib=yes -+ ;; -+ esac -+ if test "$valid_a_lib" != yes; then -+ $ECHO -+ $ECHO "*** Warning: Trying to link with static lib archive $deplib." -+ $ECHO "*** I have the capability to make that library automatically link in when" -+ $ECHO "*** you link to this library. But I can only do this if you have a" -+ $ECHO "*** shared version of the library, which you do not appear to have" -+ $ECHO "*** because the file extensions .$libext of this argument makes me believe" -+ $ECHO "*** that it is just a static archive that I should not use here." -+ else -+ $ECHO -+ $ECHO "*** Warning: Linking the shared library $output against the" -+ $ECHO "*** static library $deplib is not portable!" -+ deplibs="$deplib $deplibs" -+ fi -+ ;; -+ esac - continue - ;; -- *-*-sco3.2v5* | *-*-sco5v6*) -- # Causes problems with __ctype -- test "X$arg" = "X-lc" && continue -- ;; -- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) -- # Compiler inserts libc in the correct place for threads to work -- test "X$arg" = "X-lc" && continue -+ prog) -+ if test "$pass" != link; then -+ deplibs="$deplib $deplibs" -+ else -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ fi -+ continue - ;; -- esac -- elif test "X$arg" = "X-lc_r"; then -- case $host in -- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) -- # Do not include libc_r directly, use -pthread flag. -- continue -- ;; -- esac -- fi -- deplibs="$deplibs $arg" -- continue -- ;; -- -- -module) -- module=yes -- continue -- ;; -- -- # Tru64 UNIX uses -model [arg] to determine the layout of C++ -- # classes, name mangling, and exception handling. -- # Darwin uses the -arch flag to determine output architecture. -- -model|-arch|-isysroot) -- compiler_flags="$compiler_flags $arg" -- func_append compile_command " $arg" -- func_append finalize_command " $arg" -- prev=xcompiler -- continue -- ;; -+ esac # linkmode -+ ;; # *.$libext -+ *.lo | *.$objext) -+ if test "$pass" = conv; then -+ deplibs="$deplib $deplibs" -+ elif test "$linkmode" = prog; then -+ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then -+ # If there is no dlopen support or we're linking statically, -+ # we need to preload. -+ newdlprefiles="$newdlprefiles $deplib" -+ compile_deplibs="$deplib $compile_deplibs" -+ finalize_deplibs="$deplib $finalize_deplibs" -+ else -+ newdlfiles="$newdlfiles $deplib" -+ fi -+ fi -+ continue -+ ;; -+ %DEPLIBS%) -+ alldeplibs=yes -+ continue -+ ;; -+ esac # case $deplib - -- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) -- compiler_flags="$compiler_flags $arg" -- func_append compile_command " $arg" -- func_append finalize_command " $arg" -- case "$new_inherited_linker_flags " in -- *" $arg "*) ;; -- * ) new_inherited_linker_flags="$new_inherited_linker_flags $arg" ;; -- esac -- continue -- ;; -+ if test "$found" = yes || test -f "$lib"; then : -+ else -+ func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" -+ fi - -- -multi_module) -- single_module="${wl}-multi_module" -- continue -- ;; -+ # Check to see that this really is a libtool archive. -+ func_lalib_unsafe_p "$lib" \ -+ || func_fatal_error "\`$lib' is not a valid libtool archive" - -- -no-fast-install) -- fast_install=no -- continue -- ;; -+ func_dirname "$lib" "" "." -+ ladir="$func_dirname_result" - -- -no-install) -- case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-darwin*) -- # The PATH hackery in wrapper scripts is required on Windows -- # and Darwin in order for the loader to find any dlls it needs. -- func_warning "\`-no-install' is ignored for $host" -- func_warning "assuming \`-no-fast-install' instead" -- fast_install=no -- ;; -- *) no_install=yes ;; -- esac -- continue -- ;; -+ dlname= -+ dlopen= -+ dlpreopen= -+ libdir= -+ library_names= -+ old_library= -+ inherited_linker_flags= -+ # If the library was installed with an old release of libtool, -+ # it will not redefine variables installed, or shouldnotlink -+ installed=yes -+ shouldnotlink=no -+ avoidtemprpath= - -- -no-undefined) -- allow_undefined=no -- continue -- ;; - -- -objectlist) -- prev=objectlist -- continue -- ;; -+ # Read the .la file -+ func_source "$lib" - -- -o) prev=output ;; -+ # Convert "-framework foo" to "foo.ltframework" -+ if test -n "$inherited_linker_flags"; then -+ tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` -+ for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do -+ case " $new_inherited_linker_flags " in -+ *" $tmp_inherited_linker_flag "*) ;; -+ *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; -+ esac -+ done -+ fi -+ dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -+ if test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$new_inherited_linker_flags $compile_deplibs" -+ finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" -+ else -+ compiler_flags="$compiler_flags $inherited_linker_flags" -+ fi -+ if test "$linkmode,$pass" = "lib,link" || -+ test "$linkmode,$pass" = "prog,scan" || -+ { test "$linkmode" != prog && test "$linkmode" != lib; }; then -+ test -n "$dlopen" && dlfiles="$dlfiles $dlopen" -+ test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" -+ fi - -- -precious-files-regex) -- prev=precious_regex -- continue -- ;; -+ if test "$pass" = conv; then -+ # Only check for convenience libraries -+ deplibs="$lib $deplibs" -+ if test -z "$libdir"; then -+ if test -z "$old_library"; then -+ func_fatal_error "cannot find name of link library for \`$lib'" -+ fi -+ # It is a libtool convenience library, so add in its objects. -+ convenience="$convenience $ladir/$objdir/$old_library" -+ old_convenience="$old_convenience $ladir/$objdir/$old_library" -+ elif test "$linkmode" != prog && test "$linkmode" != lib; then -+ func_fatal_error "\`$lib' is not a convenience library" -+ fi -+ tmp_libs= -+ for deplib in $dependency_libs; do -+ deplibs="$deplib $deplibs" -+ if $opt_duplicate_deps ; then -+ case "$tmp_libs " in -+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -+ esac -+ fi -+ tmp_libs="$tmp_libs $deplib" -+ done -+ continue -+ fi # $pass = conv - -- -release) -- prev=release -- continue -- ;; - -- -rpath) -- prev=rpath -- continue -- ;; -+ # Get the name of the library we link against. -+ linklib= -+ for l in $old_library $library_names; do -+ linklib="$l" -+ done -+ if test -z "$linklib"; then -+ func_fatal_error "cannot find name of link library for \`$lib'" -+ fi - -- -R) -- prev=xrpath -- continue -- ;; -+ # This library was specified with -dlopen. -+ if test "$pass" = dlopen; then -+ if test -z "$libdir"; then -+ func_fatal_error "cannot -dlopen a convenience library: \`$lib'" -+ fi -+ if test -z "$dlname" || -+ test "$dlopen_support" != yes || -+ test "$build_libtool_libs" = no; then -+ # If there is no dlname, no dlopen support or we're linking -+ # statically, we need to preload. We also need to preload any -+ # dependent libraries so libltdl's deplib preloader doesn't -+ # bomb out in the load deplibs phase. -+ dlprefiles="$dlprefiles $lib $dependency_libs" -+ else -+ newdlfiles="$newdlfiles $lib" -+ fi -+ continue -+ fi # $pass = dlopen - -- -R*) -- func_stripname '-R' '' "$arg" -- dir=$func_stripname_result - # We need an absolute path. -- case $dir in -- [\\/]* | [A-Za-z]:[\\/]*) ;; -+ case $ladir in -+ [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; - *) -- func_fatal_error "only absolute run-paths are allowed" -+ abs_ladir=`cd "$ladir" && pwd` -+ if test -z "$abs_ladir"; then -+ func_warning "cannot determine absolute directory name of \`$ladir'" -+ func_warning "passing it literally to the linker, although it might fail" -+ abs_ladir="$ladir" -+ fi - ;; - esac -- case "$xrpath " in -- *" $dir "*) ;; -- *) xrpath="$xrpath $dir" ;; -- esac -- continue -- ;; -- -- -shared) -- # The effects of -shared are defined in a previous loop. -- continue -- ;; -+ func_basename "$lib" -+ laname="$func_basename_result" - -- -shrext) -- prev=shrext -- continue -- ;; -+ # Find the relevant object directory and library name. -+ if test "X$installed" = Xyes; then -+ if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then -+ func_warning "library \`$lib' was moved." -+ dir="$ladir" -+ absdir="$abs_ladir" -+ libdir="$abs_ladir" -+ else -+ dir="$libdir" -+ absdir="$libdir" -+ fi -+ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes -+ else -+ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then -+ dir="$ladir" -+ absdir="$abs_ladir" -+ # Remove this search path later -+ notinst_path="$notinst_path $abs_ladir" -+ else -+ dir="$ladir/$objdir" -+ absdir="$abs_ladir/$objdir" -+ # Remove this search path later -+ notinst_path="$notinst_path $abs_ladir" -+ fi -+ fi # $installed = yes -+ func_stripname 'lib' '.la' "$laname" -+ name=$func_stripname_result - -- -static | -static-libtool-libs) -- # The effects of -static are defined in a previous loop. -- # We used to do the same as -all-static on platforms that -- # didn't have a PIC flag, but the assumption that the effects -- # would be equivalent was wrong. It would break on at least -- # Digital Unix and AIX. -- continue -- ;; -- -- -thread-safe) -- thread_safe=yes -- continue -- ;; -- -- -version-info) -- prev=vinfo -- continue -- ;; -- -- -version-number) -- prev=vinfo -- vinfo_number=yes -- continue -- ;; -- -- -weak) -- prev=weak -- continue -- ;; -- -- -Wc,*) -- func_stripname '-Wc,' '' "$arg" -- args=$func_stripname_result -- arg= -- save_ifs="$IFS"; IFS=',' -- for flag in $args; do -- IFS="$save_ifs" -- func_quote_for_eval "$flag" -- arg="$arg $wl$func_quote_for_eval_result" -- compiler_flags="$compiler_flags $func_quote_for_eval_result" -- done -- IFS="$save_ifs" -- func_stripname ' ' '' "$arg" -- arg=$func_stripname_result -- ;; -- -- -Wl,*) -- func_stripname '-Wl,' '' "$arg" -- args=$func_stripname_result -- arg= -- save_ifs="$IFS"; IFS=',' -- for flag in $args; do -- IFS="$save_ifs" -- func_quote_for_eval "$flag" -- arg="$arg $wl$func_quote_for_eval_result" -- compiler_flags="$compiler_flags $wl$func_quote_for_eval_result" -- linker_flags="$linker_flags $func_quote_for_eval_result" -- done -- IFS="$save_ifs" -- func_stripname ' ' '' "$arg" -- arg=$func_stripname_result -- ;; -- -- -Xcompiler) -- prev=xcompiler -- continue -- ;; -- -- -Xlinker) -- prev=xlinker -- continue -- ;; -- -- -XCClinker) -- prev=xcclinker -- continue -- ;; -- -- # -64, -mips[0-9] enable 64-bit mode on the SGI compiler -- # -r[0-9][0-9]* specifies the processor on the SGI compiler -- # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler -- # +DA*, +DD* enable 64-bit mode on the HP compiler -- # -q* pass through compiler args for the IBM compiler -- # -m*, -t[45]*, -txscale* pass through architecture-specific -- # compiler args for GCC -- # -F/path gives path to uninstalled frameworks, gcc on darwin -- # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC -- # @file GCC response files -- -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \ -- -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*) -- func_quote_for_eval "$arg" -- arg="$func_quote_for_eval_result" -- func_append compile_command " $arg" -- func_append finalize_command " $arg" -- compiler_flags="$compiler_flags $arg" -- continue -- ;; -- -- # Some other compiler flag. -- -* | +*) -- func_quote_for_eval "$arg" -- arg="$func_quote_for_eval_result" -- ;; -- -- *.$objext) -- # A standard object. -- objs="$objs $arg" -- ;; -+ # This library was specified with -dlpreopen. -+ if test "$pass" = dlpreopen; then -+ if test -z "$libdir" && test "$linkmode" = prog; then -+ func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" -+ fi -+ # Prefer using a static library (so that no silly _DYNAMIC symbols -+ # are required to link). -+ if test -n "$old_library"; then -+ newdlprefiles="$newdlprefiles $dir/$old_library" -+ # Keep a list of preopened convenience libraries to check -+ # that they are being used correctly in the link pass. -+ test -z "$libdir" && \ -+ dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" -+ # Otherwise, use the dlname, so that lt_dlopen finds it. -+ elif test -n "$dlname"; then -+ newdlprefiles="$newdlprefiles $dir/$dlname" -+ else -+ newdlprefiles="$newdlprefiles $dir/$linklib" -+ fi -+ fi # $pass = dlpreopen - -- *.lo) -- # A libtool-controlled object. -+ if test -z "$libdir"; then -+ # Link the convenience library -+ if test "$linkmode" = lib; then -+ deplibs="$dir/$old_library $deplibs" -+ elif test "$linkmode,$pass" = "prog,link"; then -+ compile_deplibs="$dir/$old_library $compile_deplibs" -+ finalize_deplibs="$dir/$old_library $finalize_deplibs" -+ else -+ deplibs="$lib $deplibs" # used for prog,scan pass -+ fi -+ continue -+ fi - -- # Check to see that this really is a libtool object. -- if func_lalib_unsafe_p "$arg"; then -- pic_object= -- non_pic_object= - -- # Read the .lo file -- func_source "$arg" -+ if test "$linkmode" = prog && test "$pass" != link; then -+ newlib_search_path="$newlib_search_path $ladir" -+ deplibs="$lib $deplibs" - -- if test -z "$pic_object" || -- test -z "$non_pic_object" || -- test "$pic_object" = none && -- test "$non_pic_object" = none; then -- func_fatal_error "cannot find name of object for \`$arg'" -+ linkalldeplibs=no -+ if test "$link_all_deplibs" != no || test -z "$library_names" || -+ test "$build_libtool_libs" = no; then -+ linkalldeplibs=yes - fi - -- # Extract subdirectory from the argument. -- func_dirname "$arg" "/" "" -- xdir="$func_dirname_result" -- -- if test "$pic_object" != none; then -- # Prepend the subdirectory the object is found in. -- pic_object="$xdir$pic_object" -- -- if test "$prev" = dlfiles; then -- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then -- dlfiles="$dlfiles $pic_object" -- prev= -- continue -- else -- # If libtool objects are unsupported, then we need to preload. -- prev=dlprefiles -- fi -+ tmp_libs= -+ for deplib in $dependency_libs; do -+ case $deplib in -+ -L*) func_stripname '-L' '' "$deplib" -+ newlib_search_path="$newlib_search_path $func_stripname_result" -+ ;; -+ esac -+ # Need to link against all dependency_libs? -+ if test "$linkalldeplibs" = yes; then -+ deplibs="$deplib $deplibs" -+ else -+ # Need to hardcode shared library paths -+ # or/and link against static libraries -+ newdependency_libs="$deplib $newdependency_libs" - fi -- -- # CHECK ME: I think I busted this. -Ossama -- if test "$prev" = dlprefiles; then -- # Preload the old-style object. -- dlprefiles="$dlprefiles $pic_object" -- prev= -+ if $opt_duplicate_deps ; then -+ case "$tmp_libs " in -+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -+ esac - fi -+ tmp_libs="$tmp_libs $deplib" -+ done # for deplib -+ continue -+ fi # $linkmode = prog... - -- # A PIC object. -- func_append libobjs " $pic_object" -- arg="$pic_object" -- fi -+ if test "$linkmode,$pass" = "prog,link"; then -+ if test -n "$library_names" && -+ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then -+ # We need to hardcode the library path -+ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then -+ # Make sure the rpath contains only unique directories. -+ case "$temp_rpath " in -+ *"$absdir:"*) ;; -+ *) temp_rpath="$temp_rpath:$absdir" ;; -+ esac -+ fi - -- # Non-PIC object. -- if test "$non_pic_object" != none; then -- # Prepend the subdirectory the object is found in. -- non_pic_object="$xdir$non_pic_object" -+ # Hardcode the library path. -+ # Skip directories that are in the system default run-time -+ # search path. -+ case " $sys_lib_dlsearch_path " in -+ *" $absdir "*) ;; -+ *) -+ case "$compile_rpath " in -+ *" $absdir "*) ;; -+ *) compile_rpath="$compile_rpath $absdir" -+ esac -+ ;; -+ esac -+ case " $sys_lib_dlsearch_path " in -+ *" $libdir "*) ;; -+ *) -+ case "$finalize_rpath " in -+ *" $libdir "*) ;; -+ *) finalize_rpath="$finalize_rpath $libdir" -+ esac -+ ;; -+ esac -+ fi # $linkmode,$pass = prog,link... - -- # A standard non-PIC object -- func_append non_pic_objects " $non_pic_object" -- if test -z "$pic_object" || test "$pic_object" = none ; then -- arg="$non_pic_object" -- fi -- else -- # If the PIC object exists, use it instead. -- # $xdir was prepended to $pic_object above. -- non_pic_object="$pic_object" -- func_append non_pic_objects " $non_pic_object" -+ if test "$alldeplibs" = yes && -+ { test "$deplibs_check_method" = pass_all || -+ { test "$build_libtool_libs" = yes && -+ test -n "$library_names"; }; }; then -+ # We only need to search for static libraries -+ continue - fi -- else -- # Only an error if not doing a dry-run. -- if $opt_dry_run; then -- # Extract subdirectory from the argument. -- func_dirname "$arg" "/" "" -- xdir="$func_dirname_result" -+ fi - -- func_lo2o "$arg" -- pic_object=$xdir$objdir/$func_lo2o_result -- non_pic_object=$xdir$func_lo2o_result -- func_append libobjs " $pic_object" -- func_append non_pic_objects " $non_pic_object" -- else -- func_fatal_error "\`$arg' is not a valid libtool object" -- fi -+ link_static=no # Whether the deplib will be linked statically -+ use_static_libs=$prefer_static_libs -+ if test "$use_static_libs" = built && test "$installed" = yes; then -+ use_static_libs=no - fi -- ;; -- -- *.$libext) -- # An archive. -- deplibs="$deplibs $arg" -- old_deplibs="$old_deplibs $arg" -- continue -- ;; -+ if test -n "$library_names" && -+ { test "$use_static_libs" = no || test -z "$old_library"; }; then -+ case $host in -+ *cygwin* | *mingw*) -+ # No point in relinking DLLs because paths are not encoded -+ notinst_deplibs="$notinst_deplibs $lib" -+ need_relink=no -+ ;; -+ *) -+ if test "$installed" = no; then -+ notinst_deplibs="$notinst_deplibs $lib" -+ need_relink=yes -+ fi -+ ;; -+ esac -+ # This is a shared library - -- *.la) -- # A libtool-controlled library. -+ # Warn about portability, can't link against -module's on some -+ # systems (darwin). Don't bleat about dlopened modules though! -+ dlopenmodule="" -+ for dlpremoduletest in $dlprefiles; do -+ if test "X$dlpremoduletest" = "X$lib"; then -+ dlopenmodule="$dlpremoduletest" -+ break -+ fi -+ done -+ if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then -+ $ECHO -+ if test "$linkmode" = prog; then -+ $ECHO "*** Warning: Linking the executable $output against the loadable module" -+ else -+ $ECHO "*** Warning: Linking the shared library $output against the loadable module" -+ fi -+ $ECHO "*** $linklib is not portable!" -+ fi -+ if test "$linkmode" = lib && -+ test "$hardcode_into_libs" = yes; then -+ # Hardcode the library path. -+ # Skip directories that are in the system default run-time -+ # search path. -+ case " $sys_lib_dlsearch_path " in -+ *" $absdir "*) ;; -+ *) -+ case "$compile_rpath " in -+ *" $absdir "*) ;; -+ *) compile_rpath="$compile_rpath $absdir" -+ esac -+ ;; -+ esac -+ case " $sys_lib_dlsearch_path " in -+ *" $libdir "*) ;; -+ *) -+ case "$finalize_rpath " in -+ *" $libdir "*) ;; -+ *) finalize_rpath="$finalize_rpath $libdir" -+ esac -+ ;; -+ esac -+ fi - -- if test "$prev" = dlfiles; then -- # This library was specified with -dlopen. -- dlfiles="$dlfiles $arg" -- prev= -- elif test "$prev" = dlprefiles; then -- # The library was specified with -dlpreopen. -- dlprefiles="$dlprefiles $arg" -- prev= -- else -- deplibs="$deplibs $arg" -- fi -- continue -- ;; -+ if test -n "$old_archive_from_expsyms_cmds"; then -+ # figure out the soname -+ set dummy $library_names -+ shift -+ realname="$1" -+ shift -+ libname=`eval "\\$ECHO \"$libname_spec\""` -+ # use dlname if we got it. it's perfectly good, no? -+ if test -n "$dlname"; then -+ soname="$dlname" -+ elif test -n "$soname_spec"; then -+ # bleh windows -+ case $host in -+ *cygwin* | mingw*) -+ major=`expr $current - $age` -+ versuffix="-$major" -+ ;; -+ esac -+ eval soname=\"$soname_spec\" -+ else -+ soname="$realname" -+ fi - -- # Some other compiler argument. -- *) -- # Unknown arguments in both finalize_command and compile_command need -- # to be aesthetically quoted because they are evaled later. -- func_quote_for_eval "$arg" -- arg="$func_quote_for_eval_result" -- ;; -- esac # arg -+ # Make a new name for the extract_expsyms_cmds to use -+ soroot="$soname" -+ func_basename "$soroot" -+ soname="$func_basename_result" -+ func_stripname 'lib' '.dll' "$soname" -+ newlib=libimp-$func_stripname_result.a - -- # Now actually substitute the argument into the commands. -- if test -n "$arg"; then -- func_append compile_command " $arg" -- func_append finalize_command " $arg" -- fi -- done # argument parsing loop -+ # If the library has no export list, then create one now -+ if test -f "$output_objdir/$soname-def"; then : -+ else -+ func_echo "extracting exported symbol list from \`$soname'" -+ func_execute_cmds "$extract_expsyms_cmds" 'exit $?' -+ fi - -- test -n "$prev" && \ -- func_fatal_help "the \`$prevarg' option requires an argument" -+ # Create $newlib -+ if test -f "$output_objdir/$newlib"; then :; else -+ func_echo "generating import library for \`$soname'" -+ func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' -+ fi -+ # make sure the library variables are pointing to the new library -+ dir=$output_objdir -+ linklib=$newlib -+ fi # test -n "$old_archive_from_expsyms_cmds" - -- if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then -- eval arg=\"$export_dynamic_flag_spec\" -- func_append compile_command " $arg" -- func_append finalize_command " $arg" -- fi -+ if test "$linkmode" = prog || test "$mode" != relink; then -+ add_shlibpath= -+ add_dir= -+ add= -+ lib_linked=yes -+ case $hardcode_action in -+ immediate | unsupported) -+ if test "$hardcode_direct" = no; then -+ add="$dir/$linklib" -+ case $host in -+ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; -+ *-*-sysv4*uw2*) add_dir="-L$dir" ;; -+ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ -+ *-*-unixware7*) add_dir="-L$dir" ;; -+ *-*-darwin* ) -+ # if the lib is a (non-dlopened) module then we can not -+ # link against it, someone is ignoring the earlier warnings -+ if /usr/bin/file -L $add 2> /dev/null | -+ $GREP ": [^:]* bundle" >/dev/null ; then -+ if test "X$dlopenmodule" != "X$lib"; then -+ $ECHO "*** Warning: lib $linklib is a module, not a shared library" -+ if test -z "$old_library" ; then -+ $ECHO -+ $ECHO "*** And there doesn't seem to be a static archive available" -+ $ECHO "*** The link will probably fail, sorry" -+ else -+ add="$dir/$old_library" -+ fi -+ elif test -n "$old_library"; then -+ add="$dir/$old_library" -+ fi -+ fi -+ esac -+ elif test "$hardcode_minus_L" = no; then -+ case $host in -+ *-*-sunos*) add_shlibpath="$dir" ;; -+ esac -+ add_dir="-L$dir" -+ add="-l$name" -+ elif test "$hardcode_shlibpath_var" = no; then -+ add_shlibpath="$dir" -+ add="-l$name" -+ else -+ lib_linked=no -+ fi -+ ;; -+ relink) -+ if test "$hardcode_direct" = yes; then -+ add="$dir/$linklib" -+ elif test "$hardcode_minus_L" = yes; then -+ add_dir="-L$dir" -+ # Try looking first in the location we're being installed to. -+ if test -n "$inst_prefix_dir"; then -+ case $libdir in -+ [\\/]*) -+ add_dir="$add_dir -L$inst_prefix_dir$libdir" -+ ;; -+ esac -+ fi -+ add="-l$name" -+ elif test "$hardcode_shlibpath_var" = yes; then -+ add_shlibpath="$dir" -+ add="-l$name" -+ else -+ lib_linked=no -+ fi -+ ;; -+ *) lib_linked=no ;; -+ esac - -- oldlibs= -- # calculate the name of the file, without its directory -- func_basename "$output" -- outputname="$func_basename_result" -- libobjs_save="$libobjs" -+ if test "$lib_linked" != yes; then -+ func_fatal_configuration "unsupported hardcode properties" -+ fi - -- if test -n "$shlibpath_var"; then -- # get the directories listed in $shlibpath_var -- eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` -- else -- shlib_search_path= -- fi -- eval sys_lib_search_path=\"$sys_lib_search_path_spec\" -- eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" -+ if test -n "$add_shlibpath"; then -+ case :$compile_shlibpath: in -+ *":$add_shlibpath:"*) ;; -+ *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; -+ esac -+ fi -+ if test "$linkmode" = prog; then -+ test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" -+ test -n "$add" && compile_deplibs="$add $compile_deplibs" -+ else -+ test -n "$add_dir" && deplibs="$add_dir $deplibs" -+ test -n "$add" && deplibs="$add $deplibs" -+ if test "$hardcode_direct" != yes && -+ test "$hardcode_minus_L" != yes && -+ test "$hardcode_shlibpath_var" = yes; then -+ case :$finalize_shlibpath: in -+ *":$libdir:"*) ;; -+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; -+ esac -+ fi -+ fi -+ fi - -- func_dirname "$output" "/" "" -- output_objdir="$func_dirname_result$objdir" -- # Create the object directory. -- func_mkdir_p "$output_objdir" -+ if test "$linkmode" = prog || test "$mode" = relink; then -+ add_shlibpath= -+ add_dir= -+ add= -+ # Finalize command for both is simple: just hardcode it. -+ if test "$hardcode_direct" = yes; then -+ add="$libdir/$linklib" -+ elif test "$hardcode_minus_L" = yes; then -+ add_dir="-L$libdir" -+ add="-l$name" -+ elif test "$hardcode_shlibpath_var" = yes; then -+ case :$finalize_shlibpath: in -+ *":$libdir:"*) ;; -+ *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; -+ esac -+ add="-l$name" -+ elif test "$hardcode_automatic" = yes; then -+ if test -n "$inst_prefix_dir" && -+ test -f "$inst_prefix_dir$libdir/$linklib" ; then -+ add="$inst_prefix_dir$libdir/$linklib" -+ else -+ add="$libdir/$linklib" -+ fi -+ else -+ # We cannot seem to hardcode it, guess we'll fake it. -+ add_dir="-L$libdir" -+ # Try looking first in the location we're being installed to. -+ if test -n "$inst_prefix_dir"; then -+ case $libdir in -+ [\\/]*) -+ add_dir="$add_dir -L$inst_prefix_dir$libdir" -+ ;; -+ esac -+ fi -+ add="-l$name" -+ fi - -- # Determine the type of output -- case $output in -- "") -- func_fatal_help "you must specify an output file" -- ;; -- *.$libext) linkmode=oldlib ;; -- *.lo | *.$objext) linkmode=obj ;; -- *.la) linkmode=lib ;; -- *) linkmode=prog ;; # Anything else should be a program. -- esac -+ if test "$linkmode" = prog; then -+ test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" -+ test -n "$add" && finalize_deplibs="$add $finalize_deplibs" -+ else -+ test -n "$add_dir" && deplibs="$add_dir $deplibs" -+ test -n "$add" && deplibs="$add $deplibs" -+ fi -+ fi -+ elif test "$linkmode" = prog; then -+ # Here we assume that one of hardcode_direct or hardcode_minus_L -+ # is not unsupported. This is valid on all known static and -+ # shared platforms. -+ if test "$hardcode_direct" != unsupported; then -+ test -n "$old_library" && linklib="$old_library" -+ compile_deplibs="$dir/$linklib $compile_deplibs" -+ finalize_deplibs="$dir/$linklib $finalize_deplibs" -+ else -+ compile_deplibs="-l$name -L$dir $compile_deplibs" -+ finalize_deplibs="-l$name -L$dir $finalize_deplibs" -+ fi -+ elif test "$build_libtool_libs" = yes; then -+ # Not a shared library -+ if test "$deplibs_check_method" != pass_all; then -+ # We're trying link a shared library against a static one -+ # but the system doesn't support it. - -- specialdeplibs= -+ # Just print a warning and add the library to dependency_libs so -+ # that the program can be linked against the static library. -+ $ECHO -+ $ECHO "*** Warning: This system can not link to static lib archive $lib." -+ $ECHO "*** I have the capability to make that library automatically link in when" -+ $ECHO "*** you link to this library. But I can only do this if you have a" -+ $ECHO "*** shared version of the library, which you do not appear to have." -+ if test "$module" = yes; then -+ $ECHO "*** But as you try to build a module library, libtool will still create " -+ $ECHO "*** a static module, that should work as long as the dlopening application" -+ $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." -+ if test -z "$global_symbol_pipe"; then -+ $ECHO -+ $ECHO "*** However, this would only work if libtool was able to extract symbol" -+ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" -+ $ECHO "*** not find such a program. So, this module is probably useless." -+ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." -+ fi -+ if test "$build_old_libs" = no; then -+ build_libtool_libs=module -+ build_old_libs=yes -+ else -+ build_libtool_libs=no -+ fi -+ fi -+ else -+ deplibs="$dir/$old_library $deplibs" -+ link_static=yes -+ fi -+ fi # link shared/static library? - -- libs= -- # Find all interdependent deplibs by searching for libraries -- # that are linked more than once (e.g. -la -lb -la) -- for deplib in $deplibs; do -- if $opt_duplicate_deps ; then -- case "$libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -- esac -- fi -- libs="$libs $deplib" -- done -+ if test "$linkmode" = lib; then -+ if test -n "$dependency_libs" && -+ { test "$hardcode_into_libs" != yes || -+ test "$build_old_libs" = yes || -+ test "$link_static" = yes; }; then -+ # Extract -R from dependency_libs -+ temp_deplibs= -+ for libdir in $dependency_libs; do -+ case $libdir in -+ -R*) func_stripname '-R' '' "$libdir" -+ temp_xrpath=$func_stripname_result -+ case " $xrpath " in -+ *" $temp_xrpath "*) ;; -+ *) xrpath="$xrpath $temp_xrpath";; -+ esac;; -+ *) temp_deplibs="$temp_deplibs $libdir";; -+ esac -+ done -+ dependency_libs="$temp_deplibs" -+ fi - -- if test "$linkmode" = lib; then -- libs="$predeps $libs $compiler_lib_search_path $postdeps" -+ newlib_search_path="$newlib_search_path $absdir" -+ # Link against this library -+ test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" -+ # ... and its dependency_libs -+ tmp_libs= -+ for deplib in $dependency_libs; do -+ newdependency_libs="$deplib $newdependency_libs" -+ if $opt_duplicate_deps ; then -+ case "$tmp_libs " in -+ *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -+ esac -+ fi -+ tmp_libs="$tmp_libs $deplib" -+ done - -- # Compute libraries that are listed more than once in $predeps -- # $postdeps and mark them as special (i.e., whose duplicates are -- # not to be eliminated). -- pre_post_deps= -- if $opt_duplicate_compiler_generated_deps; then -- for pre_post_dep in $predeps $postdeps; do -- case "$pre_post_deps " in -- *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; -- esac -- pre_post_deps="$pre_post_deps $pre_post_dep" -+ if test "$link_all_deplibs" != no; then -+ # Add the search paths of all dependency libraries -+ for deplib in $dependency_libs; do -+ case $deplib in -+ -L*) path="$deplib" ;; -+ *.la) -+ func_dirname "$deplib" "" "." -+ dir="$func_dirname_result" -+ # We need an absolute path. -+ case $dir in -+ [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; -+ *) -+ absdir=`cd "$dir" && pwd` -+ if test -z "$absdir"; then -+ func_warning "cannot determine absolute directory name of \`$dir'" -+ absdir="$dir" -+ fi -+ ;; -+ esac -+ if $GREP "^installed=no" $deplib > /dev/null; then -+ case $host in -+ *-*-darwin*) -+ depdepl= -+ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` -+ if test -n "$deplibrary_names" ; then -+ for tmp in $deplibrary_names ; do -+ depdepl=$tmp -+ done -+ if test -f "$absdir/$objdir/$depdepl" ; then -+ depdepl="$absdir/$objdir/$depdepl" -+ darwin_install_name=`otool -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'` -+ darwin_install_name=`$ECHO $darwin_install_name` -+ compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" -+ linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" -+ path= -+ fi -+ fi -+ ;; -+ *) -+ path="-L$absdir/$objdir" -+ ;; -+ esac -+ else -+ eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` -+ test -z "$libdir" && \ -+ func_fatal_error "\`$deplib' is not a valid libtool archive" -+ test "$absdir" != "$libdir" && \ -+ func_warning "\`$deplib' seems to be moved" -+ -+ path="-L$absdir" -+ fi -+ ;; -+ esac -+ case " $deplibs " in -+ *" $path "*) ;; -+ *) deplibs="$path $deplibs" ;; -+ esac -+ done -+ fi # link_all_deplibs != no -+ fi # linkmode = lib -+ done # for deplib in $libs -+ dependency_libs="$newdependency_libs" -+ if test "$pass" = dlpreopen; then -+ # Link the dlpreopened libraries before other libraries -+ for deplib in $save_deplibs; do -+ deplibs="$deplib $deplibs" - done - fi -- pre_post_deps= -- fi -- -- deplibs= -- newdependency_libs= -- newlib_search_path= -- need_relink=no # whether we're linking any uninstalled libtool libraries -- notinst_deplibs= # not-installed libtool libraries -- notinst_path= # paths that contain not-installed libtool libraries -+ if test "$pass" != dlopen; then -+ if test "$pass" != conv; then -+ # Make sure lib_search_path contains only unique directories. -+ lib_search_path= -+ for dir in $newlib_search_path; do -+ case "$lib_search_path " in -+ *" $dir "*) ;; -+ *) lib_search_path="$lib_search_path $dir" ;; -+ esac -+ done -+ newlib_search_path= -+ fi - -- case $linkmode in -- lib) -- passes="conv dlpreopen link" -- for file in $dlfiles $dlprefiles; do -- case $file in -- *.la) ;; -- *) -- func_fatal_help "libraries can \`-dlopen' only libtool libraries: $file" -- ;; -- esac -- done -- ;; -- prog) -- compile_deplibs= -- finalize_deplibs= -- alldeplibs=no -- newdlfiles= -- newdlprefiles= -- passes="conv scan dlopen dlpreopen link" -- ;; -- *) passes="conv" -- ;; -- esac -- -- for pass in $passes; do -- # The preopen pass in lib mode reverses $deplibs; put it back here -- # so that -L comes before libs that need it for instance... -- if test "$linkmode,$pass" = "lib,link"; then -- ## FIXME: Find the place where the list is rebuilt in the wrong -- ## order, and fix it there properly -- tmp_deplibs= -- for deplib in $deplibs; do -- tmp_deplibs="$deplib $tmp_deplibs" -- done -- deplibs="$tmp_deplibs" -- fi -- -- if test "$linkmode,$pass" = "lib,link" || -- test "$linkmode,$pass" = "prog,scan"; then -- libs="$deplibs" -- deplibs= -+ if test "$linkmode,$pass" != "prog,link"; then -+ vars="deplibs" -+ else -+ vars="compile_deplibs finalize_deplibs" -+ fi -+ for var in $vars dependency_libs; do -+ # Add libraries to $var in reverse order -+ eval tmp_libs=\"\$$var\" -+ new_libs= -+ for deplib in $tmp_libs; do -+ # FIXME: Pedantically, this is the right thing to do, so -+ # that some nasty dependency loop isn't accidentally -+ # broken: -+ #new_libs="$deplib $new_libs" -+ # Pragmatically, this seems to cause very few problems in -+ # practice: -+ case $deplib in -+ -L*) new_libs="$deplib $new_libs" ;; -+ -R*) ;; -+ *) -+ # And here is the reason: when a library appears more -+ # than once as an explicit dependence of a library, or -+ # is implicitly linked in more than once by the -+ # compiler, it is considered special, and multiple -+ # occurrences thereof are not removed. Compare this -+ # with having the same library being listed as a -+ # dependency of multiple other libraries: in this case, -+ # we know (pedantically, we assume) the library does not -+ # need to be listed more than once, so we keep only the -+ # last copy. This is not always right, but it is rare -+ # enough that we require users that really mean to play -+ # such unportable linking tricks to link the library -+ # using -Wl,-lname, so that libtool does not consider it -+ # for duplicate removal. -+ case " $specialdeplibs " in -+ *" $deplib "*) new_libs="$deplib $new_libs" ;; -+ *) -+ case " $new_libs " in -+ *" $deplib "*) ;; -+ *) new_libs="$deplib $new_libs" ;; -+ esac -+ ;; -+ esac -+ ;; -+ esac -+ done -+ tmp_libs= -+ for deplib in $new_libs; do -+ case $deplib in -+ -L*) -+ case " $tmp_libs " in -+ *" $deplib "*) ;; -+ *) tmp_libs="$tmp_libs $deplib" ;; -+ esac -+ ;; -+ *) tmp_libs="$tmp_libs $deplib" ;; -+ esac -+ done -+ eval $var=\"$tmp_libs\" -+ done # for var - fi -- if test "$linkmode" = prog; then -- case $pass in -- dlopen) libs="$dlfiles" ;; -- dlpreopen) libs="$dlprefiles" ;; -- link) -- libs="$deplibs %DEPLIBS%" -- test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" -+ # Last step: remove runtime libs from dependency_libs -+ # (they stay in deplibs) -+ tmp_libs= -+ for i in $dependency_libs ; do -+ case " $predeps $postdeps $compiler_lib_search_path " in -+ *" $i "*) -+ i="" - ;; - esac -- fi -- if test "$linkmode,$pass" = "lib,dlpreopen"; then -- # Collect and forward deplibs of preopened libtool libs -- for lib in $dlprefiles; do -- # Ignore non-libtool-libs -- dependency_libs= -- case $lib in -- *.la) func_source "$lib" ;; -- esac -+ if test -n "$i" ; then -+ tmp_libs="$tmp_libs $i" -+ fi -+ done -+ dependency_libs=$tmp_libs -+ done # for pass -+ if test "$linkmode" = prog; then -+ dlfiles="$newdlfiles" -+ fi -+ if test "$linkmode" = prog || test "$linkmode" = lib; then -+ dlprefiles="$newdlprefiles" -+ fi - -- # Collect preopened libtool deplibs, except any this library -- # has declared as weak libs -- for deplib in $dependency_libs; do -- deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"` -- case " $weak_libs " in -- *" $deplib_base "*) ;; -- *) deplibs="$deplibs $deplib" ;; -- esac -- done -- done -- libs="$dlprefiles" -- fi -- if test "$pass" = dlopen; then -- # Collect dlpreopened libraries -- save_deplibs="$deplibs" -- deplibs= -+ case $linkmode in -+ oldlib) -+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -+ func_warning "\`-dlopen' is ignored for archives" - fi - -- for deplib in $libs; do -- lib= -- found=no -- case $deplib in -- -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe|-threads) -- if test "$linkmode,$pass" = "prog,link"; then -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- else -- compiler_flags="$compiler_flags $deplib" -- if test "$linkmode" = lib ; then -- case "$new_inherited_linker_flags " in -- *" $deplib "*) ;; -- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; -- esac -- fi -- fi -- continue -- ;; -- -l*) -- if test "$linkmode" != lib && test "$linkmode" != prog; then -- func_warning "\`-l' is ignored for archives/objects" -- continue -- fi -- func_stripname '-l' '' "$deplib" -+ test -n "$deplibs" && \ -+ func_warning "\`-l' and \`-L' are ignored for archives" -+ -+ -+ test -n "$rpath" && \ -+ func_warning "\`-rpath' is ignored for archives" -+ -+ test -n "$xrpath" && \ -+ func_warning "\`-R' is ignored for archives" -+ -+ test -n "$vinfo" && \ -+ func_warning "\`-version-info/-version-number' is ignored for archives" -+ -+ test -n "$release" && \ -+ func_warning "\`-release' is ignored for archives" -+ -+ test -n "$export_symbols$export_symbols_regex" && \ -+ func_warning "\`-export-symbols' is ignored for archives" -+ -+ # Now set the variables for building old libraries. -+ build_libtool_libs=no -+ oldlibs="$output" -+ objs="$objs$old_deplibs" -+ ;; -+ -+ lib) -+ # Make sure we only generate libraries of the form `libNAME.la'. -+ case $outputname in -+ lib*) -+ func_stripname 'lib' '.la' "$outputname" -+ name=$func_stripname_result -+ eval shared_ext=\"$shrext_cmds\" -+ eval libname=\"$libname_spec\" -+ ;; -+ *) -+ test "$module" = no && \ -+ func_fatal_help "libtool library \`$output' must begin with \`lib'" -+ -+ if test "$need_lib_prefix" != no; then -+ # Add the "lib" prefix for modules if required -+ func_stripname '' '.la' "$outputname" - name=$func_stripname_result -- for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do -- for search_ext in .la $std_shrext .so .a; do -- # Search the libtool library -- lib="$searchdir/lib${name}${search_ext}" -- if test -f "$lib"; then -- if test "$search_ext" = ".la"; then -- found=yes -- else -- found=no -- fi -- break 2 -- fi -- done -- done -- if test "$found" != yes; then -- # deplib doesn't seem to be a libtool library -- if test "$linkmode,$pass" = "prog,link"; then -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- else -- deplibs="$deplib $deplibs" -- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" -- fi -- continue -- else # deplib is a libtool library -- # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, -- # We need to do some special things here, and not later. -- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -- case " $predeps $postdeps " in -- *" $deplib "*) -- if func_lalib_p "$lib"; then -- library_names= -- old_library= -- func_source "$lib" -- for l in $old_library $library_names; do -- ll="$l" -- done -- if test "X$ll" = "X$old_library" ; then # only static version available -- found=no -- func_dirname "$lib" "" "." -- ladir="$func_dirname_result" -- lib=$ladir/$old_library -- if test "$linkmode,$pass" = "prog,link"; then -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- else -- deplibs="$deplib $deplibs" -- test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" -- fi -- continue -- fi -- fi -- ;; -- *) ;; -- esac -- fi -- fi -- ;; # -l -- *.ltframework) -- if test "$linkmode,$pass" = "prog,link"; then -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- else -- deplibs="$deplib $deplibs" -- if test "$linkmode" = lib ; then -- case "$new_inherited_linker_flags " in -- *" $deplib "*) ;; -- * ) new_inherited_linker_flags="$new_inherited_linker_flags $deplib" ;; -- esac -- fi -- fi -- continue -- ;; -- -L*) -- case $linkmode in -- lib) -- deplibs="$deplib $deplibs" -- test "$pass" = conv && continue -- newdependency_libs="$deplib $newdependency_libs" -- func_stripname '-L' '' "$deplib" -- newlib_search_path="$newlib_search_path $func_stripname_result" -- ;; -- prog) -- if test "$pass" = conv; then -- deplibs="$deplib $deplibs" -- continue -- fi -- if test "$pass" = scan; then -- deplibs="$deplib $deplibs" -- else -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- fi -- func_stripname '-L' '' "$deplib" -- newlib_search_path="$newlib_search_path $func_stripname_result" -- ;; -- *) -- func_warning "\`-L' is ignored for archives/objects" -- ;; -- esac # linkmode -- continue -- ;; # -L -- -R*) -- if test "$pass" = link; then -- func_stripname '-R' '' "$deplib" -- dir=$func_stripname_result -- # Make sure the xrpath contains only unique directories. -- case "$xrpath " in -- *" $dir "*) ;; -- *) xrpath="$xrpath $dir" ;; -- esac -- fi -- deplibs="$deplib $deplibs" -- continue -- ;; -- *.la) lib="$deplib" ;; -- *.$libext) -- if test "$pass" = conv; then -- deplibs="$deplib $deplibs" -- continue -- fi -- case $linkmode in -- lib) -- # Linking convenience modules into shared libraries is allowed, -- # but linking other static libraries is non-portable. -- case " $dlpreconveniencelibs " in -- *" $deplib "*) ;; -- *) -- valid_a_lib=no -- case $deplibs_check_method in -- match_pattern*) -- set dummy $deplibs_check_method; shift -- match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` -- if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \ -- | $EGREP "$match_pattern_regex" > /dev/null; then -- valid_a_lib=yes -- fi -- ;; -- pass_all) -- valid_a_lib=yes -- ;; -- esac -- if test "$valid_a_lib" != yes; then -- $ECHO -- $ECHO "*** Warning: Trying to link with static lib archive $deplib." -- $ECHO "*** I have the capability to make that library automatically link in when" -- $ECHO "*** you link to this library. But I can only do this if you have a" -- $ECHO "*** shared version of the library, which you do not appear to have" -- $ECHO "*** because the file extensions .$libext of this argument makes me believe" -- $ECHO "*** that it is just a static archive that I should not use here." -- else -- $ECHO -- $ECHO "*** Warning: Linking the shared library $output against the" -- $ECHO "*** static library $deplib is not portable!" -- deplibs="$deplib $deplibs" -- fi -- ;; -- esac -- continue -- ;; -- prog) -- if test "$pass" != link; then -- deplibs="$deplib $deplibs" -- else -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- fi -- continue -- ;; -- esac # linkmode -- ;; # *.$libext -- *.lo | *.$objext) -- if test "$pass" = conv; then -- deplibs="$deplib $deplibs" -- elif test "$linkmode" = prog; then -- if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then -- # If there is no dlopen support or we're linking statically, -- # we need to preload. -- newdlprefiles="$newdlprefiles $deplib" -- compile_deplibs="$deplib $compile_deplibs" -- finalize_deplibs="$deplib $finalize_deplibs" -- else -- newdlfiles="$newdlfiles $deplib" -- fi -- fi -- continue -- ;; -- %DEPLIBS%) -- alldeplibs=yes -- continue -- ;; -- esac # case $deplib -+ eval shared_ext=\"$shrext_cmds\" -+ eval libname=\"$libname_spec\" -+ else -+ func_stripname '' '.la' "$outputname" -+ libname=$func_stripname_result -+ fi -+ ;; -+ esac - -- if test "$found" = yes || test -f "$lib"; then : -+ if test -n "$objs"; then -+ if test "$deplibs_check_method" != pass_all; then -+ func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" - else -- func_fatal_error "cannot find the library \`$lib' or unhandled argument \`$deplib'" -+ $ECHO -+ $ECHO "*** Warning: Linking the shared library $output against the non-libtool" -+ $ECHO "*** objects $objs is not portable!" -+ libobjs="$libobjs $objs" - fi -+ fi - -- # Check to see that this really is a libtool archive. -- func_lalib_unsafe_p "$lib" \ -- || func_fatal_error "\`$lib' is not a valid libtool archive" -+ test "$dlself" != no && \ -+ func_warning "\`-dlopen self' is ignored for libtool libraries" - -- func_dirname "$lib" "" "." -- ladir="$func_dirname_result" -+ set dummy $rpath -+ shift -+ test "$#" -gt 1 && \ -+ func_warning "ignoring multiple \`-rpath's for a libtool library" - -- dlname= -- dlopen= -- dlpreopen= -- libdir= -- library_names= -- old_library= -- inherited_linker_flags= -- # If the library was installed with an old release of libtool, -- # it will not redefine variables installed, or shouldnotlink -- installed=yes -- shouldnotlink=no -- avoidtemprpath= -+ install_libdir="$1" - -+ oldlibs= -+ if test -z "$rpath"; then -+ if test "$build_libtool_libs" = yes; then -+ # Building a libtool convenience library. -+ # Some compilers have problems with a `.al' extension so -+ # convenience libraries should have the same extension an -+ # archive normally would. -+ oldlibs="$output_objdir/$libname.$libext $oldlibs" -+ build_libtool_libs=convenience -+ build_old_libs=yes -+ fi - -- # Read the .la file -- func_source "$lib" -+ test -n "$vinfo" && \ -+ func_warning "\`-version-info/-version-number' is ignored for convenience libraries" - -- # Convert "-framework foo" to "foo.ltframework" -- if test -n "$inherited_linker_flags"; then -- tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'` -- for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do -- case " $new_inherited_linker_flags " in -- *" $tmp_inherited_linker_flag "*) ;; -- *) new_inherited_linker_flags="$new_inherited_linker_flags $tmp_inherited_linker_flag";; -- esac -- done -- fi -- dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -- if test "$linkmode,$pass" = "lib,link" || -- test "$linkmode,$pass" = "prog,scan" || -- { test "$linkmode" != prog && test "$linkmode" != lib; }; then -- test -n "$dlopen" && dlfiles="$dlfiles $dlopen" -- test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" -- fi -+ test -n "$release" && \ -+ func_warning "\`-release' is ignored for convenience libraries" -+ else - -- if test "$pass" = conv; then -- # Only check for convenience libraries -- deplibs="$lib $deplibs" -- if test -z "$libdir"; then -- if test -z "$old_library"; then -- func_fatal_error "cannot find name of link library for \`$lib'" -- fi -- # It is a libtool convenience library, so add in its objects. -- convenience="$convenience $ladir/$objdir/$old_library" -- old_convenience="$old_convenience $ladir/$objdir/$old_library" -- elif test "$linkmode" != prog && test "$linkmode" != lib; then -- func_fatal_error "\`$lib' is not a convenience library" -- fi -- tmp_libs= -- for deplib in $dependency_libs; do -- deplibs="$deplib $deplibs" -- if $opt_duplicate_deps ; then -- case "$tmp_libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -- esac -- fi -- tmp_libs="$tmp_libs $deplib" -- done -- continue -- fi # $pass = conv -+ # Parse the version information argument. -+ save_ifs="$IFS"; IFS=':' -+ set dummy $vinfo 0 0 0 -+ shift -+ IFS="$save_ifs" - -+ test -n "$7" && \ -+ func_fatal_help "too many parameters to \`-version-info'" - -- # Get the name of the library we link against. -- linklib= -- for l in $old_library $library_names; do -- linklib="$l" -- done -- if test -z "$linklib"; then -- func_fatal_error "cannot find name of link library for \`$lib'" -- fi -+ # convert absolute version numbers to libtool ages -+ # this retains compatibility with .la files and attempts -+ # to make the code below a bit more comprehensible - -- # This library was specified with -dlopen. -- if test "$pass" = dlopen; then -- if test -z "$libdir"; then -- func_fatal_error "cannot -dlopen a convenience library: \`$lib'" -- fi -- if test -z "$dlname" || -- test "$dlopen_support" != yes || -- test "$build_libtool_libs" = no; then -- # If there is no dlname, no dlopen support or we're linking -- # statically, we need to preload. We also need to preload any -- # dependent libraries so libltdl's deplib preloader doesn't -- # bomb out in the load deplibs phase. -- dlprefiles="$dlprefiles $lib $dependency_libs" -- else -- newdlfiles="$newdlfiles $lib" -- fi -- continue -- fi # $pass = dlopen -+ case $vinfo_number in -+ yes) -+ number_major="$1" -+ number_minor="$2" -+ number_revision="$3" -+ # -+ # There are really only two kinds -- those that -+ # use the current revision as the major version -+ # and those that subtract age and use age as -+ # a minor version. But, then there is irix -+ # which has an extra 1 added just for fun -+ # -+ case $version_type in -+ darwin|linux|osf|windows) -+ current=`expr $number_major + $number_minor` -+ age="$number_minor" -+ revision="$number_revision" -+ ;; -+ freebsd-aout|freebsd-elf|sunos) -+ current="$number_major" -+ revision="$number_minor" -+ age="0" -+ ;; -+ irix|nonstopux) -+ current=`expr $number_major + $number_minor - 1` -+ age="$number_minor" -+ revision="$number_minor" -+ ;; -+ *) -+ $echo "$modename: unknown library version type \`$version_type'" 1>&2 -+ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 -+ exit $EXIT_FAILURE -+ ;; -+ esac -+ ;; -+ no) -+ current="$1" -+ revision="$2" -+ age="$3" -+ ;; -+ esac - -- # We need an absolute path. -- case $ladir in -- [\\/]* | [A-Za-z]:[\\/]*) abs_ladir="$ladir" ;; -+ # Check that each of the things are valid numbers. -+ case $current in -+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; - *) -- abs_ladir=`cd "$ladir" && pwd` -- if test -z "$abs_ladir"; then -- func_warning "cannot determine absolute directory name of \`$ladir'" -- func_warning "passing it literally to the linker, although it might fail" -- abs_ladir="$ladir" -- fi -+ func_error "CURRENT \`$current' must be a nonnegative integer" -+ func_fatal_error "\`$vinfo' is not valid version information" - ;; - esac -- func_basename "$lib" -- laname="$func_basename_result" - -- # Find the relevant object directory and library name. -- if test "X$installed" = Xyes; then -- if test ! -f "$libdir/$linklib" && test -f "$abs_ladir/$linklib"; then -- func_warning "library \`$lib' was moved." -- dir="$ladir" -- absdir="$abs_ladir" -- libdir="$abs_ladir" -- else -- dir="$libdir" -- absdir="$libdir" -- fi -- test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes -- else -- if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then -- dir="$ladir" -- absdir="$abs_ladir" -- # Remove this search path later -- notinst_path="$notinst_path $abs_ladir" -- else -- dir="$ladir/$objdir" -- absdir="$abs_ladir/$objdir" -- # Remove this search path later -- notinst_path="$notinst_path $abs_ladir" -- fi -- fi # $installed = yes -- func_stripname 'lib' '.la' "$laname" -- name=$func_stripname_result -+ case $revision in -+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; -+ *) -+ func_error "REVISION \`$revision' must be a nonnegative integer" -+ func_fatal_error "\`$vinfo' is not valid version information" -+ ;; -+ esac - -- # This library was specified with -dlpreopen. -- if test "$pass" = dlpreopen; then -- if test -z "$libdir" && test "$linkmode" = prog; then -- func_fatal_error "only libraries may -dlpreopen a convenience library: \`$lib'" -- fi -- # Prefer using a static library (so that no silly _DYNAMIC symbols -- # are required to link). -- if test -n "$old_library"; then -- newdlprefiles="$newdlprefiles $dir/$old_library" -- # Keep a list of preopened convenience libraries to check -- # that they are being used correctly in the link pass. -- test -z "$libdir" && \ -- dlpreconveniencelibs="$dlpreconveniencelibs $dir/$old_library" -- # Otherwise, use the dlname, so that lt_dlopen finds it. -- elif test -n "$dlname"; then -- newdlprefiles="$newdlprefiles $dir/$dlname" -- else -- newdlprefiles="$newdlprefiles $dir/$linklib" -- fi -- fi # $pass = dlpreopen -+ case $age in -+ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; -+ *) -+ func_error "AGE \`$age' must be a nonnegative integer" -+ func_fatal_error "\`$vinfo' is not valid version information" -+ ;; -+ esac - -- if test -z "$libdir"; then -- # Link the convenience library -- if test "$linkmode" = lib; then -- deplibs="$dir/$old_library $deplibs" -- elif test "$linkmode,$pass" = "prog,link"; then -- compile_deplibs="$dir/$old_library $compile_deplibs" -- finalize_deplibs="$dir/$old_library $finalize_deplibs" -- else -- deplibs="$lib $deplibs" # used for prog,scan pass -- fi -- continue -+ if test "$age" -gt "$current"; then -+ func_error "AGE \`$age' is greater than the current interface number \`$current'" -+ func_fatal_error "\`$vinfo' is not valid version information" - fi - -+ # Calculate the version variables. -+ major= -+ versuffix= -+ verstring= -+ case $version_type in -+ none) ;; - -- if test "$linkmode" = prog && test "$pass" != link; then -- newlib_search_path="$newlib_search_path $ladir" -- deplibs="$lib $deplibs" -+ darwin) -+ # Like Linux, but with the current version available in -+ # verstring for coding it into the library header -+ major=.`expr $current - $age` -+ versuffix="$major.$age.$revision" -+ # Darwin ld doesn't like 0 for these options... -+ minor_current=`expr $current + 1` -+ verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" -+ ;; - -- linkalldeplibs=no -- if test "$link_all_deplibs" != no || test -z "$library_names" || -- test "$build_libtool_libs" = no; then -- linkalldeplibs=yes -- fi -+ freebsd-aout) -+ major=".$current" -+ versuffix=".$current.$revision"; -+ ;; - -- tmp_libs= -- for deplib in $dependency_libs; do -- case $deplib in -- -L*) func_stripname '-L' '' "$deplib" -- newlib_search_path="$newlib_search_path $func_stripname_result" -- ;; -- esac -- # Need to link against all dependency_libs? -- if test "$linkalldeplibs" = yes; then -- deplibs="$deplib $deplibs" -- else -- # Need to hardcode shared library paths -- # or/and link against static libraries -- newdependency_libs="$deplib $newdependency_libs" -- fi -- if $opt_duplicate_deps ; then -- case "$tmp_libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -- esac -- fi -- tmp_libs="$tmp_libs $deplib" -- done # for deplib -- continue -- fi # $linkmode = prog... -+ freebsd-elf) -+ major=".$current" -+ versuffix=".$current" -+ ;; - -- if test "$linkmode,$pass" = "prog,link"; then -- if test -n "$library_names" && -- { { test "$prefer_static_libs" = no || -- test "$prefer_static_libs,$installed" = "built,yes"; } || -- test -z "$old_library"; }; then -- # We need to hardcode the library path -- if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then -- # Make sure the rpath contains only unique directories. -- case "$temp_rpath:" in -- *"$absdir:"*) ;; -- *) temp_rpath="$temp_rpath$absdir:" ;; -- esac -- fi -+ irix | nonstopux) -+ major=`expr $current - $age + 1` - -- # Hardcode the library path. -- # Skip directories that are in the system default run-time -- # search path. -- case " $sys_lib_dlsearch_path " in -- *" $absdir "*) ;; -- *) -- case "$compile_rpath " in -- *" $absdir "*) ;; -- *) compile_rpath="$compile_rpath $absdir" -- esac -- ;; -- esac -- case " $sys_lib_dlsearch_path " in -- *" $libdir "*) ;; -- *) -- case "$finalize_rpath " in -- *" $libdir "*) ;; -- *) finalize_rpath="$finalize_rpath $libdir" -- esac -- ;; -- esac -- fi # $linkmode,$pass = prog,link... -+ case $version_type in -+ nonstopux) verstring_prefix=nonstopux ;; -+ *) verstring_prefix=sgi ;; -+ esac -+ verstring="$verstring_prefix$major.$revision" - -- if test "$alldeplibs" = yes && -- { test "$deplibs_check_method" = pass_all || -- { test "$build_libtool_libs" = yes && -- test -n "$library_names"; }; }; then -- # We only need to search for static libraries -- continue -- fi -- fi -+ # Add in all the interfaces that we are compatible with. -+ loop=$revision -+ while test "$loop" -ne 0; do -+ iface=`expr $revision - $loop` -+ loop=`expr $loop - 1` -+ verstring="$verstring_prefix$major.$iface:$verstring" -+ done - -- link_static=no # Whether the deplib will be linked statically -- use_static_libs=$prefer_static_libs -- if test "$use_static_libs" = built && test "$installed" = yes; then -- use_static_libs=no -- fi -- if test -n "$library_names" && -- { test "$use_static_libs" = no || test -z "$old_library"; }; then -- case $host in -- *cygwin* | *mingw*) -- # No point in relinking DLLs because paths are not encoded -- notinst_deplibs="$notinst_deplibs $lib" -- need_relink=no -+ # Before this point, $major must not contain `.'. -+ major=.$major -+ versuffix="$major.$revision" -+ ;; -+ -+ linux) -+ major=.`expr $current - $age` -+ versuffix="$major.$age.$revision" -+ ;; -+ -+ osf) -+ major=.`expr $current - $age` -+ versuffix=".$current.$age.$revision" -+ verstring="$current.$age.$revision" -+ -+ # Add in all the interfaces that we are compatible with. -+ loop=$age -+ while test "$loop" -ne 0; do -+ iface=`expr $current - $loop` -+ loop=`expr $loop - 1` -+ verstring="$verstring:${iface}.0" -+ done -+ -+ # Make executables depend on our current version. -+ verstring="$verstring:${current}.0" -+ ;; -+ -+ qnx) -+ major=".$current" -+ versuffix=".$current" -+ ;; -+ -+ sunos) -+ major=".$current" -+ versuffix=".$current.$revision" -+ ;; -+ -+ windows) -+ # Use '-' rather than '.', since we only want one -+ # extension on DOS 8.3 filesystems. -+ major=`expr $current - $age` -+ versuffix="-$major" -+ ;; -+ -+ *) -+ func_fatal_configuration "unknown library version type \`$version_type'" -+ ;; -+ esac -+ -+ # Clear the version info if we defaulted, and they specified a release. -+ if test -z "$vinfo" && test -n "$release"; then -+ major= -+ case $version_type in -+ darwin) -+ # we can't check for "0.0" in archive_cmds due to quoting -+ # problems, so we reset it completely -+ verstring= - ;; - *) -- if test "$installed" = no; then -- notinst_deplibs="$notinst_deplibs $lib" -- need_relink=yes -- fi -+ verstring="0.0" - ;; - esac -- # This is a shared library -- -- # Warn about portability, can't link against -module's on some -- # systems (darwin). Don't bleat about dlopened modules though! -- dlopenmodule="" -- for dlpremoduletest in $dlprefiles; do -- if test "X$dlpremoduletest" = "X$lib"; then -- dlopenmodule="$dlpremoduletest" -- break -- fi -- done -- if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then -- $ECHO -- if test "$linkmode" = prog; then -- $ECHO "*** Warning: Linking the executable $output against the loadable module" -- else -- $ECHO "*** Warning: Linking the shared library $output against the loadable module" -- fi -- $ECHO "*** $linklib is not portable!" -+ if test "$need_version" = no; then -+ versuffix= -+ else -+ versuffix=".0.0" - fi -- if test "$linkmode" = lib && -- test "$hardcode_into_libs" = yes; then -- # Hardcode the library path. -- # Skip directories that are in the system default run-time -- # search path. -- case " $sys_lib_dlsearch_path " in -- *" $absdir "*) ;; -- *) -- case "$compile_rpath " in -- *" $absdir "*) ;; -- *) compile_rpath="$compile_rpath $absdir" -- esac -- ;; -- esac -- case " $sys_lib_dlsearch_path " in -- *" $libdir "*) ;; -- *) -- case "$finalize_rpath " in -- *" $libdir "*) ;; -- *) finalize_rpath="$finalize_rpath $libdir" -- esac -- ;; -- esac -+ fi -+ -+ # Remove version info from name if versioning should be avoided -+ if test "$avoid_version" = yes && test "$need_version" = no; then -+ major= -+ versuffix= -+ verstring="" -+ fi -+ -+ # Check to see if the archive will have undefined symbols. -+ if test "$allow_undefined" = yes; then -+ if test "$allow_undefined_flag" = unsupported; then -+ func_warning "undefined symbols not allowed in $host shared libraries" -+ build_libtool_libs=no -+ build_old_libs=yes - fi -+ else -+ # Don't allow undefined symbols. -+ allow_undefined_flag="$no_undefined_flag" -+ fi - -- if test -n "$old_archive_from_expsyms_cmds"; then -- # figure out the soname -- set dummy $library_names -- shift -- realname="$1" -- shift -- libname=`eval "\\$ECHO \"$libname_spec\""` -- # use dlname if we got it. it's perfectly good, no? -- if test -n "$dlname"; then -- soname="$dlname" -- elif test -n "$soname_spec"; then -- # bleh windows -- case $host in -- *cygwin* | mingw*) -- major=`expr $current - $age` -- versuffix="-$major" -- ;; -- esac -- eval soname=\"$soname_spec\" -- else -- soname="$realname" -- fi -+ fi - -- # Make a new name for the extract_expsyms_cmds to use -- soroot="$soname" -- func_basename "$soroot" -- soname="$func_basename_result" -- func_stripname 'lib' '.dll' "$soname" -- newlib=libimp-$func_stripname_result.a -+ func_generate_dlsyms "$libname" "$libname" "yes" -+ libobjs="$libobjs $symfileobj" - -- # If the library has no export list, then create one now -- if test -f "$output_objdir/$soname-def"; then : -- else -- func_echo "extracting exported symbol list from \`$soname'" -- func_execute_cmds "$extract_expsyms_cmds" 'exit $?' -- fi -+ if test "$mode" != relink; then -+ # Remove our outputs, but don't remove object files since they -+ # may have been created when compiling PIC objects. -+ removelist= -+ tempremovelist=`$ECHO "$output_objdir/*"` -+ for p in $tempremovelist; do -+ case $p in -+ *.$objext) -+ ;; -+ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) -+ if test "X$precious_files_regex" != "X"; then -+ if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 -+ then -+ continue -+ fi -+ fi -+ removelist="$removelist $p" -+ ;; -+ *) ;; -+ esac -+ done -+ test -n "$removelist" && \ -+ func_show_eval "${RM}r \$removelist" -+ fi - -- # Create $newlib -- if test -f "$output_objdir/$newlib"; then :; else -- func_echo "generating import library for \`$soname'" -- func_execute_cmds "$old_archive_from_expsyms_cmds" 'exit $?' -- fi -- # make sure the library variables are pointing to the new library -- dir=$output_objdir -- linklib=$newlib -- fi # test -n "$old_archive_from_expsyms_cmds" -+ # Now set the variables for building old libraries. -+ if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then -+ oldlibs="$oldlibs $output_objdir/$libname.$libext" - -- if test "$linkmode" = prog || test "$mode" != relink; then -- add_shlibpath= -- add_dir= -- add= -- lib_linked=yes -- case $hardcode_action in -- immediate | unsupported) -- if test "$hardcode_direct" = no; then -- add="$dir/$linklib" -- case $host in -- *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; -- *-*-sysv4*uw2*) add_dir="-L$dir" ;; -- *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ -- *-*-unixware7*) add_dir="-L$dir" ;; -- *-*-darwin* ) -- # if the lib is a (non-dlopened) module then we can not -- # link against it, someone is ignoring the earlier warnings -- if /usr/bin/file -L $add 2> /dev/null | -- $GREP ": [^:]* bundle" >/dev/null ; then -- if test "X$dlopenmodule" != "X$lib"; then -- $ECHO "*** Warning: lib $linklib is a module, not a shared library" -- if test -z "$old_library" ; then -- $ECHO -- $ECHO "*** And there doesn't seem to be a static archive available" -- $ECHO "*** The link will probably fail, sorry" -- else -- add="$dir/$old_library" -- fi -- elif test -n "$old_library"; then -- add="$dir/$old_library" -- fi -- fi -- esac -- elif test "$hardcode_minus_L" = no; then -- case $host in -- *-*-sunos*) add_shlibpath="$dir" ;; -- esac -- add_dir="-L$dir" -- add="-l$name" -- elif test "$hardcode_shlibpath_var" = no; then -- add_shlibpath="$dir" -- add="-l$name" -+ # Transform .lo files to .o files. -+ oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` -+ fi -+ -+ # Eliminate all temporary directories. -+ for path in $notinst_path; do -+ lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e 's% $path % %g'` -+ deplibs=`$ECHO "X$deplibs " | $Xsed -e 's% -L$path % %g'` -+ dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e 's% -L$path % %g'` -+ done -+ -+ if test -n "$xrpath"; then -+ # If the user specified any rpath flags, then add them. -+ temp_xrpath= -+ for libdir in $xrpath; do -+ temp_xrpath="$temp_xrpath -R$libdir" -+ case "$finalize_rpath " in -+ *" $libdir "*) ;; -+ *) finalize_rpath="$finalize_rpath $libdir" ;; -+ esac -+ done -+ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then -+ dependency_libs="$temp_xrpath $dependency_libs" -+ fi -+ fi -+ -+ # Make sure dlfiles contains only unique files that won't be dlpreopened -+ old_dlfiles="$dlfiles" -+ dlfiles= -+ for lib in $old_dlfiles; do -+ case " $dlprefiles $dlfiles " in -+ *" $lib "*) ;; -+ *) dlfiles="$dlfiles $lib" ;; -+ esac -+ done -+ -+ # Make sure dlprefiles contains only unique files -+ old_dlprefiles="$dlprefiles" -+ dlprefiles= -+ for lib in $old_dlprefiles; do -+ case "$dlprefiles " in -+ *" $lib "*) ;; -+ *) dlprefiles="$dlprefiles $lib" ;; -+ esac -+ done -+ -+ if test "$build_libtool_libs" = yes; then -+ if test -n "$rpath"; then -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) -+ # these systems don't actually have a c library (as such)! -+ ;; -+ *-*-rhapsody* | *-*-darwin1.[012]) -+ # Rhapsody C library is in the System framework -+ deplibs="$deplibs System.ltframework" -+ ;; -+ *-*-netbsd*) -+ # Don't link with libc until the a.out ld.so is fixed. -+ ;; -+ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) -+ # Do not include libc due to us having libc/libc_r. -+ ;; -+ *-*-sco3.2v5* | *-*-sco5v6*) -+ # Causes problems with __ctype -+ ;; -+ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) -+ # Compiler inserts libc in the correct place for threads to work -+ ;; -+ *) -+ # Add libc to deplibs on all other systems if necessary. -+ if test "$build_libtool_need_lc" = "yes"; then -+ deplibs="$deplibs -lc" -+ fi -+ ;; -+ esac -+ fi -+ -+ # Transform deplibs into only deplibs that can be linked in shared. -+ name_save=$name -+ libname_save=$libname -+ release_save=$release -+ versuffix_save=$versuffix -+ major_save=$major -+ # I'm not sure if I'm treating the release correctly. I think -+ # release should show up in the -l (ie -lgmp5) so we don't want to -+ # add it in twice. Is that correct? -+ release="" -+ versuffix="" -+ major="" -+ newdeplibs= -+ droppeddeps=no -+ case $deplibs_check_method in -+ pass_all) -+ # Don't check for shared/static. Everything works. -+ # This might be a little naive. We might want to check -+ # whether the library exists or not. But this is on -+ # osf3 & osf4 and I'm not really sure... Just -+ # implementing what was already the behavior. -+ newdeplibs=$deplibs -+ ;; -+ test_compile) -+ # This code stresses the "libraries are programs" paradigm to its -+ # limits. Maybe even breaks it. We compile a program, linking it -+ # against the deplibs as a proxy for the library. Then we can check -+ # whether they linked in statically or dynamically with ldd. -+ $opt_dry_run || $RM conftest.c -+ cat > conftest.c </dev/null` -+ for potent_lib in $potential_libs; do -+ # Follow soft links. -+ if ls -lLd "$potent_lib" 2>/dev/null | -+ $GREP " -> " >/dev/null; then -+ continue -+ fi -+ # The statement above tries to avoid entering an -+ # endless loop below, in case of cyclic links. -+ # We might still enter an endless loop, since a link -+ # loop can be closed while we follow links, -+ # but so what? -+ potlib="$potent_lib" -+ while test -h "$potlib" 2>/dev/null; do -+ potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` -+ case $potliblink in -+ [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; -+ *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; -+ esac -+ done -+ if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | -+ $SED -e 10q | -+ $EGREP "$file_magic_regex" > /dev/null; then -+ newdeplibs="$newdeplibs $a_deplib" -+ a_deplib="" -+ break 2 -+ fi -+ done -+ done - fi -- else -- # We cannot seem to hardcode it, guess we'll fake it. -- add_dir="-L$libdir" -- # Try looking first in the location we're being installed to. -- if test -n "$inst_prefix_dir"; then -- case $libdir in -- [\\/]*) -- add_dir="$add_dir -L$inst_prefix_dir$libdir" -- ;; -- esac -+ if test -n "$a_deplib" ; then -+ droppeddeps=yes -+ $ECHO -+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." -+ $ECHO "*** I have the capability to make that library automatically link in when" -+ $ECHO "*** you link to this library. But I can only do this if you have a" -+ $ECHO "*** shared version of the library, which you do not appear to have" -+ $ECHO "*** because I did check the linker path looking for a file starting" -+ if test -z "$potlib" ; then -+ $ECHO "*** with $libname but no candidates were found. (...for file magic test)" -+ else -+ $ECHO "*** with $libname and none of the candidates passed a file format test" -+ $ECHO "*** using a file magic. Last file checked: $potlib" -+ fi - fi -- add="-l$name" -- fi -- -- if test "$linkmode" = prog; then -- test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" -- test -n "$add" && finalize_deplibs="$add $finalize_deplibs" - else -- test -n "$add_dir" && deplibs="$add_dir $deplibs" -- test -n "$add" && deplibs="$add $deplibs" -+ # Add a -L argument. -+ newdeplibs="$newdeplibs $a_deplib" - fi -- fi -- elif test "$linkmode" = prog; then -- # Here we assume that one of hardcode_direct or hardcode_minus_L -- # is not unsupported. This is valid on all known static and -- # shared platforms. -- if test "$hardcode_direct" != unsupported; then -- test -n "$old_library" && linklib="$old_library" -- compile_deplibs="$dir/$linklib $compile_deplibs" -- finalize_deplibs="$dir/$linklib $finalize_deplibs" -- else -- compile_deplibs="-l$name -L$dir $compile_deplibs" -- finalize_deplibs="-l$name -L$dir $finalize_deplibs" -- fi -- elif test "$build_libtool_libs" = yes; then -- # Not a shared library -- if test "$deplibs_check_method" != pass_all; then -- # We're trying link a shared library against a static one -- # but the system doesn't support it. -- -- # Just print a warning and add the library to dependency_libs so -- # that the program can be linked against the static library. -- $ECHO -- $ECHO "*** Warning: This system can not link to static lib archive $lib." -- $ECHO "*** I have the capability to make that library automatically link in when" -- $ECHO "*** you link to this library. But I can only do this if you have a" -- $ECHO "*** shared version of the library, which you do not appear to have." -- if test "$module" = yes; then -- $ECHO "*** But as you try to build a module library, libtool will still create " -- $ECHO "*** a static module, that should work as long as the dlopening application" -- $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime." -- if test -z "$global_symbol_pipe"; then -- $ECHO -- $ECHO "*** However, this would only work if libtool was able to extract symbol" -- $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" -- $ECHO "*** not find such a program. So, this module is probably useless." -- $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." -+ done # Gone through all deplibs. -+ ;; -+ match_pattern*) -+ set dummy $deplibs_check_method; shift -+ match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` -+ for a_deplib in $deplibs; do -+ name=`expr $a_deplib : '-l\(.*\)'` -+ # If $name is empty we are operating on a -L argument. -+ if test -n "$name" && test "$name" != "0"; then -+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -+ case " $predeps $postdeps " in -+ *" $a_deplib "*) -+ newdeplibs="$newdeplibs $a_deplib" -+ a_deplib="" -+ ;; -+ esac - fi -- if test "$build_old_libs" = no; then -- build_libtool_libs=module -- build_old_libs=yes -- else -- build_libtool_libs=no -+ if test -n "$a_deplib" ; then -+ libname=`eval "\\$ECHO \"$libname_spec\""` -+ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do -+ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` -+ for potent_lib in $potential_libs; do -+ potlib="$potent_lib" # see symlink-check above in file_magic test -+ if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ -+ $EGREP "$match_pattern_regex" > /dev/null; then -+ newdeplibs="$newdeplibs $a_deplib" -+ a_deplib="" -+ break 2 -+ fi -+ done -+ done -+ fi -+ if test -n "$a_deplib" ; then -+ droppeddeps=yes -+ $ECHO -+ $ECHO "*** Warning: linker path does not have real file for library $a_deplib." -+ $ECHO "*** I have the capability to make that library automatically link in when" -+ $ECHO "*** you link to this library. But I can only do this if you have a" -+ $ECHO "*** shared version of the library, which you do not appear to have" -+ $ECHO "*** because I did check the linker path looking for a file starting" -+ if test -z "$potlib" ; then -+ $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" -+ else -+ $ECHO "*** with $libname and none of the candidates passed a file format test" -+ $ECHO "*** using a regex pattern. Last file checked: $potlib" -+ fi - fi -+ else -+ # Add a -L argument. -+ newdeplibs="$newdeplibs $a_deplib" - fi -- else -- deplibs="$dir/$old_library $deplibs" -- link_static=yes -- fi -- fi # link shared/static library? -- -- if test "$linkmode" = lib; then -- if test -n "$dependency_libs" && -- { test "$hardcode_into_libs" != yes || -- test "$build_old_libs" = yes || -- test "$link_static" = yes; }; then -- # Extract -R from dependency_libs -- temp_deplibs= -- for libdir in $dependency_libs; do -- case $libdir in -- -R*) func_stripname '-R' '' "$libdir" -- temp_xrpath=$func_stripname_result -- case " $xrpath " in -- *" $temp_xrpath "*) ;; -- *) xrpath="$xrpath $temp_xrpath";; -- esac;; -- *) temp_deplibs="$temp_deplibs $libdir";; -- esac -+ done # Gone through all deplibs. -+ ;; -+ none | unknown | *) -+ newdeplibs="" -+ tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ -+ -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` -+ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -+ for i in $predeps $postdeps ; do -+ # can't use Xsed below, because $i might contain '/' -+ tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` - done -- dependency_libs="$temp_deplibs" - fi -- -- newlib_search_path="$newlib_search_path $absdir" -- # Link against this library -- test "$link_static" = no && newdependency_libs="$abs_ladir/$laname $newdependency_libs" -- # ... and its dependency_libs -- tmp_libs= -- for deplib in $dependency_libs; do -- newdependency_libs="$deplib $newdependency_libs" -- if $opt_duplicate_deps ; then -- case "$tmp_libs " in -- *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; -- esac -+ if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | -+ $GREP . >/dev/null; then -+ $ECHO -+ if test "X$deplibs_check_method" = "Xnone"; then -+ $ECHO "*** Warning: inter-library dependencies are not supported in this platform." -+ else -+ $ECHO "*** Warning: inter-library dependencies are not known to be supported." - fi -- tmp_libs="$tmp_libs $deplib" -- done -- -- if test "$link_all_deplibs" != no; then -- # Add the search paths of all dependency libraries -- for deplib in $dependency_libs; do -- case $deplib in -- -L*) path="$deplib" ;; -- *.la) -- func_dirname "$deplib" "" "." -- dir="$func_dirname_result" -- # We need an absolute path. -- case $dir in -- [\\/]* | [A-Za-z]:[\\/]*) absdir="$dir" ;; -- *) -- absdir=`cd "$dir" && pwd` -- if test -z "$absdir"; then -- func_warning "cannot determine absolute directory name of \`$dir'" -- absdir="$dir" -- fi -- ;; -- esac -- if $GREP "^installed=no" $deplib > /dev/null; then -- case $host in -- *-*-darwin*) -- depdepl= -- eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` -- if test -n "$deplibrary_names" ; then -- for tmp in $deplibrary_names ; do -- depdepl=$tmp -- done -- if test -f "$absdir/$objdir/$depdepl" ; then -- depdepl="$absdir/$objdir/$depdepl" -- darwin_install_name=`otool -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'` -- darwin_install_name=`$ECHO $darwin_install_name` -- if test -z "$darwin_install_name"; then -- darwin_install_name=`otool64 -L $depdepl | $SED -n -e '3q;2,2p' | $SED -e 's/(.*//'` -- darwin_install_name=`$ECHO $darwin_install_name` -- fi -- compiler_flags="$compiler_flags ${wl}-dylib_file ${wl}${darwin_install_name}:${depdepl}" -- linker_flags="$linker_flags -dylib_file ${darwin_install_name}:${depdepl}" -- path= -- fi -- fi -- ;; -- *) -- path="-L$absdir/$objdir" -- ;; -- esac -- else -- eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` -- test -z "$libdir" && \ -- func_fatal_error "\`$deplib' is not a valid libtool archive" -- test "$absdir" != "$libdir" && \ -- func_warning "\`$deplib' seems to be moved" -- -- path="-L$absdir" -- fi -- ;; -- esac -- case " $deplibs " in -- *" $path "*) ;; -- *) deplibs="$path $deplibs" ;; -- esac -- done -- fi # link_all_deplibs != no -- fi # linkmode = lib -- done # for deplib in $libs -- if test "$pass" = link; then -- if test "$linkmode" = "prog"; then -- compile_deplibs="$new_inherited_linker_flags $compile_deplibs" -- finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs" -- else -- compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -- fi -- fi -- dependency_libs="$newdependency_libs" -- if test "$pass" = dlpreopen; then -- # Link the dlpreopened libraries before other libraries -- for deplib in $save_deplibs; do -- deplibs="$deplib $deplibs" -- done -- fi -- if test "$pass" != dlopen; then -- if test "$pass" != conv; then -- # Make sure lib_search_path contains only unique directories. -- lib_search_path= -- for dir in $newlib_search_path; do -- case "$lib_search_path " in -- *" $dir "*) ;; -- *) lib_search_path="$lib_search_path $dir" ;; -- esac -- done -- newlib_search_path= -- fi -- -- if test "$linkmode,$pass" != "prog,link"; then -- vars="deplibs" -- else -- vars="compile_deplibs finalize_deplibs" -- fi -- for var in $vars dependency_libs; do -- # Add libraries to $var in reverse order -- eval tmp_libs=\"\$$var\" -- new_libs= -- for deplib in $tmp_libs; do -- # FIXME: Pedantically, this is the right thing to do, so -- # that some nasty dependency loop isn't accidentally -- # broken: -- #new_libs="$deplib $new_libs" -- # Pragmatically, this seems to cause very few problems in -- # practice: -- case $deplib in -- -L*) new_libs="$deplib $new_libs" ;; -- -R*) ;; -- *) -- # And here is the reason: when a library appears more -- # than once as an explicit dependence of a library, or -- # is implicitly linked in more than once by the -- # compiler, it is considered special, and multiple -- # occurrences thereof are not removed. Compare this -- # with having the same library being listed as a -- # dependency of multiple other libraries: in this case, -- # we know (pedantically, we assume) the library does not -- # need to be listed more than once, so we keep only the -- # last copy. This is not always right, but it is rare -- # enough that we require users that really mean to play -- # such unportable linking tricks to link the library -- # using -Wl,-lname, so that libtool does not consider it -- # for duplicate removal. -- case " $specialdeplibs " in -- *" $deplib "*) new_libs="$deplib $new_libs" ;; -- *) -- case " $new_libs " in -- *" $deplib "*) ;; -- *) new_libs="$deplib $new_libs" ;; -- esac -- ;; -- esac -- ;; -- esac -- done -- tmp_libs= -- for deplib in $new_libs; do -- case $deplib in -- -L*) -- case " $tmp_libs " in -- *" $deplib "*) ;; -- *) tmp_libs="$tmp_libs $deplib" ;; -- esac -- ;; -- *) tmp_libs="$tmp_libs $deplib" ;; -- esac -- done -- eval $var=\"$tmp_libs\" -- done # for var -- fi -- # Last step: remove runtime libs from dependency_libs -- # (they stay in deplibs) -- tmp_libs= -- for i in $dependency_libs ; do -- case " $predeps $postdeps $compiler_lib_search_path " in -- *" $i "*) -- i="" -- ;; -- esac -- if test -n "$i" ; then -- tmp_libs="$tmp_libs $i" -- fi -- done -- dependency_libs=$tmp_libs -- done # for pass -- if test "$linkmode" = prog; then -- dlfiles="$newdlfiles" -- fi -- if test "$linkmode" = prog || test "$linkmode" = lib; then -- dlprefiles="$newdlprefiles" -- fi -- -- case $linkmode in -- oldlib) -- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -- func_warning "\`-dlopen' is ignored for archives" -- fi -- -- test -n "$deplibs" && \ -- func_warning "\`-l' and \`-L' are ignored for archives" -- -- -- test -n "$rpath" && \ -- func_warning "\`-rpath' is ignored for archives" -- -- test -n "$xrpath" && \ -- func_warning "\`-R' is ignored for archives" -- -- test -n "$vinfo" && \ -- func_warning "\`-version-info/-version-number' is ignored for archives" -- -- test -n "$release" && \ -- func_warning "\`-release' is ignored for archives" -- -- test -n "$export_symbols$export_symbols_regex" && \ -- func_warning "\`-export-symbols' is ignored for archives" -- -- # Now set the variables for building old libraries. -- build_libtool_libs=no -- oldlibs="$output" -- objs="$objs$old_deplibs" -- ;; -- -- lib) -- # Make sure we only generate libraries of the form `libNAME.la'. -- case $outputname in -- lib*) -- func_stripname 'lib' '.la' "$outputname" -- name=$func_stripname_result -- eval shared_ext=\"$shrext_cmds\" -- eval libname=\"$libname_spec\" -- ;; -- *) -- test "$module" = no && \ -- func_fatal_help "libtool library \`$output' must begin with \`lib'" -- -- if test "$need_lib_prefix" != no; then -- # Add the "lib" prefix for modules if required -- func_stripname '' '.la' "$outputname" -- name=$func_stripname_result -- eval shared_ext=\"$shrext_cmds\" -- eval libname=\"$libname_spec\" -- else -- func_stripname '' '.la' "$outputname" -- libname=$func_stripname_result -- fi -- ;; -- esac -- -- if test -n "$objs"; then -- if test "$deplibs_check_method" != pass_all; then -- func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs" -- else -- $ECHO -- $ECHO "*** Warning: Linking the shared library $output against the non-libtool" -- $ECHO "*** objects $objs is not portable!" -- libobjs="$libobjs $objs" -- fi -- fi -- -- test "$dlself" != no && \ -- func_warning "\`-dlopen self' is ignored for libtool libraries" -- -- set dummy $rpath -- shift -- test "$#" -gt 1 && \ -- func_warning "ignoring multiple \`-rpath's for a libtool library" -- -- install_libdir="$1" -- -- oldlibs= -- if test -z "$rpath"; then -- if test "$build_libtool_libs" = yes; then -- # Building a libtool convenience library. -- # Some compilers have problems with a `.al' extension so -- # convenience libraries should have the same extension an -- # archive normally would. -- oldlibs="$output_objdir/$libname.$libext $oldlibs" -- build_libtool_libs=convenience -- build_old_libs=yes -- fi -- -- test -n "$vinfo" && \ -- func_warning "\`-version-info/-version-number' is ignored for convenience libraries" -- -- test -n "$release" && \ -- func_warning "\`-release' is ignored for convenience libraries" -- else -- -- # Parse the version information argument. -- save_ifs="$IFS"; IFS=':' -- set dummy $vinfo 0 0 0 -- shift -- IFS="$save_ifs" -- -- test -n "$7" && \ -- func_fatal_help "too many parameters to \`-version-info'" -- -- # convert absolute version numbers to libtool ages -- # this retains compatibility with .la files and attempts -- # to make the code below a bit more comprehensible -- -- case $vinfo_number in -- yes) -- number_major="$1" -- number_minor="$2" -- number_revision="$3" -- # -- # There are really only two kinds -- those that -- # use the current revision as the major version -- # and those that subtract age and use age as -- # a minor version. But, then there is irix -- # which has an extra 1 added just for fun -- # -- case $version_type in -- darwin|linux|osf|windows|none) -- current=`expr $number_major + $number_minor` -- age="$number_minor" -- revision="$number_revision" -- ;; -- freebsd-aout|freebsd-elf|sunos) -- current="$number_major" -- revision="$number_minor" -- age="0" -- ;; -- irix|nonstopux) -- current=`expr $number_major + $number_minor - 1` -- age="$number_minor" -- revision="$number_minor" -- ;; -- *) -- func_fatal_configuration "$modename: unknown library version type \`$version_type'" -- ;; -- esac -- ;; -- no) -- current="$1" -- revision="$2" -- age="$3" -- ;; -- esac -- -- # Check that each of the things are valid numbers. -- case $current in -- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; -- *) -- func_error "CURRENT \`$current' must be a nonnegative integer" -- func_fatal_error "\`$vinfo' is not valid version information" -- ;; -- esac -- -- case $revision in -- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; -- *) -- func_error "REVISION \`$revision' must be a nonnegative integer" -- func_fatal_error "\`$vinfo' is not valid version information" -- ;; -- esac -- -- case $age in -- 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; -- *) -- func_error "AGE \`$age' must be a nonnegative integer" -- func_fatal_error "\`$vinfo' is not valid version information" -+ $ECHO "*** All declared inter-library dependencies are being dropped." -+ droppeddeps=yes -+ fi - ;; - esac -+ versuffix=$versuffix_save -+ major=$major_save -+ release=$release_save -+ libname=$libname_save -+ name=$name_save - -- if test "$age" -gt "$current"; then -- func_error "AGE \`$age' is greater than the current interface number \`$current'" -- func_fatal_error "\`$vinfo' is not valid version information" -- fi -- -- # Calculate the version variables. -- major= -- versuffix= -- verstring= -- case $version_type in -- none) ;; -- -- darwin) -- # Like Linux, but with the current version available in -- # verstring for coding it into the library header -- major=.`expr $current - $age` -- versuffix="$major.$age.$revision" -- # Darwin ld doesn't like 0 for these options... -- minor_current=`expr $current + 1` -- verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" -+ case $host in -+ *-*-rhapsody* | *-*-darwin1.[012]) -+ # On Rhapsody replace the C library with the System framework -+ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` - ;; -+ esac - -- freebsd-aout) -- major=".$current" -- versuffix=".$current.$revision"; -- ;; -+ if test "$droppeddeps" = yes; then -+ if test "$module" = yes; then -+ $ECHO -+ $ECHO "*** Warning: libtool could not satisfy all declared inter-library" -+ $ECHO "*** dependencies of module $libname. Therefore, libtool will create" -+ $ECHO "*** a static module, that should work as long as the dlopening" -+ $ECHO "*** application is linked with the -dlopen flag." -+ if test -z "$global_symbol_pipe"; then -+ $ECHO -+ $ECHO "*** However, this would only work if libtool was able to extract symbol" -+ $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" -+ $ECHO "*** not find such a program. So, this module is probably useless." -+ $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." -+ fi -+ if test "$build_old_libs" = no; then -+ oldlibs="$output_objdir/$libname.$libext" -+ build_libtool_libs=module -+ build_old_libs=yes -+ else -+ build_libtool_libs=no -+ fi -+ else -+ $ECHO "*** The inter-library dependencies that have been dropped here will be" -+ $ECHO "*** automatically added whenever a program is linked with this library" -+ $ECHO "*** or is declared to -dlopen it." - -- freebsd-elf) -- major=".$current" -- versuffix=".$current" -+ if test "$allow_undefined" = no; then -+ $ECHO -+ $ECHO "*** Since this library must not contain undefined symbols," -+ $ECHO "*** because either the platform does not support them or" -+ $ECHO "*** it was explicitly requested with -no-undefined," -+ $ECHO "*** libtool will only create a static version of it." -+ if test "$build_old_libs" = no; then -+ oldlibs="$output_objdir/$libname.$libext" -+ build_libtool_libs=module -+ build_old_libs=yes -+ else -+ build_libtool_libs=no -+ fi -+ fi -+ fi -+ fi -+ # Done checking deplibs! -+ deplibs=$newdeplibs -+ fi -+ # Time to change all our "foo.ltframework" stuff back to "-framework foo" -+ case $host in -+ *-*-darwin*) -+ newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -+ new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -+ deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` - ;; -+ esac - -- irix | nonstopux) -- major=`expr $current - $age + 1` -- -- case $version_type in -- nonstopux) verstring_prefix=nonstopux ;; -- *) verstring_prefix=sgi ;; -+ # move library search paths that coincide with paths to not yet -+ # installed libraries to the beginning of the library search list -+ new_libs= -+ for path in $notinst_path; do -+ case " $new_libs " in -+ *" -L$path/$objdir "*) ;; -+ *) -+ case " $deplibs " in -+ *" -L$path/$objdir "*) -+ new_libs="$new_libs -L$path/$objdir" ;; - esac -- verstring="$verstring_prefix$major.$revision" -- -- # Add in all the interfaces that we are compatible with. -- loop=$revision -- while test "$loop" -ne 0; do -- iface=`expr $revision - $loop` -- loop=`expr $loop - 1` -- verstring="$verstring_prefix$major.$iface:$verstring" -- done -- -- # Before this point, $major must not contain `.'. -- major=.$major -- versuffix="$major.$revision" - ;; -- -- linux) -- major=.`expr $current - $age` -- versuffix="$major.$age.$revision" -+ esac -+ done -+ for deplib in $deplibs; do -+ case $deplib in -+ -L*) -+ case " $new_libs " in -+ *" $deplib "*) ;; -+ *) new_libs="$new_libs $deplib" ;; -+ esac - ;; -+ *) new_libs="$new_libs $deplib" ;; -+ esac -+ done -+ deplibs="$new_libs" - -- osf) -- major=.`expr $current - $age` -- versuffix=".$current.$age.$revision" -- verstring="$current.$age.$revision" -+ # All the library-specific variables (install_libdir is set above). -+ library_names= -+ old_library= -+ dlname= - -- # Add in all the interfaces that we are compatible with. -- loop=$age -- while test "$loop" -ne 0; do -- iface=`expr $current - $loop` -- loop=`expr $loop - 1` -- verstring="$verstring:${iface}.0" -+ # Test again, we may have decided not to build it any more -+ if test "$build_libtool_libs" = yes; then -+ if test "$hardcode_into_libs" = yes; then -+ # Hardcode the library paths -+ hardcode_libdirs= -+ dep_rpath= -+ rpath="$finalize_rpath" -+ test "$mode" != relink && rpath="$compile_rpath$rpath" -+ for libdir in $rpath; do -+ if test -n "$hardcode_libdir_flag_spec"; then -+ if test -n "$hardcode_libdir_separator"; then -+ if test -z "$hardcode_libdirs"; then -+ hardcode_libdirs="$libdir" -+ else -+ # Just accumulate the unique libdirs. -+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -+ ;; -+ *) -+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -+ ;; -+ esac -+ fi -+ else -+ eval flag=\"$hardcode_libdir_flag_spec\" -+ dep_rpath="$dep_rpath $flag" -+ fi -+ elif test -n "$runpath_var"; then -+ case "$perm_rpath " in -+ *" $libdir "*) ;; -+ *) perm_rpath="$perm_rpath $libdir" ;; -+ esac -+ fi - done -+ # Substitute the hardcoded libdirs into the rpath. -+ if test -n "$hardcode_libdir_separator" && -+ test -n "$hardcode_libdirs"; then -+ libdir="$hardcode_libdirs" -+ if test -n "$hardcode_libdir_flag_spec_ld"; then -+ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" -+ else -+ eval dep_rpath=\"$hardcode_libdir_flag_spec\" -+ fi -+ fi -+ if test -n "$runpath_var" && test -n "$perm_rpath"; then -+ # We should set the runpath_var. -+ rpath= -+ for dir in $perm_rpath; do -+ rpath="$rpath$dir:" -+ done -+ eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" -+ fi -+ test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" -+ fi - -- # Make executables depend on our current version. -- verstring="$verstring:${current}.0" -- ;; -+ shlibpath="$finalize_shlibpath" -+ test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" -+ if test -n "$shlibpath"; then -+ eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" -+ fi - -- qnx) -- major=".$current" -- versuffix=".$current" -- ;; -+ # Get the real and link names of the library. -+ eval shared_ext=\"$shrext_cmds\" -+ eval library_names=\"$library_names_spec\" -+ set dummy $library_names -+ shift -+ realname="$1" -+ shift - -- sunos) -- major=".$current" -- versuffix=".$current.$revision" -- ;; -+ if test -n "$soname_spec"; then -+ eval soname=\"$soname_spec\" -+ else -+ soname="$realname" -+ fi -+ if test -z "$dlname"; then -+ dlname=$soname -+ fi - -- windows) -- # Use '-' rather than '.', since we only want one -- # extension on DOS 8.3 filesystems. -- major=`expr $current - $age` -- versuffix="-$major" -- ;; -+ lib="$output_objdir/$realname" -+ linknames= -+ for link -+ do -+ linknames="$linknames $link" -+ done - -- *) -- func_fatal_configuration "unknown library version type \`$version_type'" -+ # Use standard objects if they are pic -+ test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ -+ delfiles= -+ if test -n "$export_symbols" && test -n "$include_expsyms"; then -+ $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" -+ export_symbols="$output_objdir/$libname.uexp" -+ delfiles="$delfiles $export_symbols" -+ fi -+ -+ orig_export_symbols= -+ case $host_os in -+ cygwin* | mingw*) -+ if test -n "$export_symbols" && test -z "$export_symbols_regex"; then -+ # exporting using user supplied symfile -+ if test "x`$SED 1q $export_symbols`" != xEXPORTS; then -+ # and it's NOT already a .def file. Must figure out -+ # which of the given symbols are data symbols and tag -+ # them as such. So, trigger use of export_symbols_cmds. -+ # export_symbols gets reassigned inside the "prepare -+ # the list of exported symbols" if statement, so the -+ # include_expsyms logic still works. -+ orig_export_symbols="$export_symbols" -+ export_symbols= -+ always_export_symbols=yes -+ fi -+ fi - ;; - esac - -- # Clear the version info if we defaulted, and they specified a release. -- if test -z "$vinfo" && test -n "$release"; then -- major= -- case $version_type in -- darwin) -- # we can't check for "0.0" in archive_cmds due to quoting -- # problems, so we reset it completely -- verstring= -- ;; -- *) -- verstring="0.0" -- ;; -- esac -- if test "$need_version" = no; then -- versuffix= -- else -- versuffix=".0.0" -+ # Prepare the list of exported symbols -+ if test -z "$export_symbols"; then -+ if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then -+ func_echo "generating symbol list for \`$libname.la'" -+ export_symbols="$output_objdir/$libname.exp" -+ $opt_dry_run || $RM $export_symbols -+ cmds=$export_symbols_cmds -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ eval cmd=\"$cmd\" -+ if len=`expr "X$cmd" : ".*"` && -+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then -+ func_show_eval "$cmd" 'exit $?' -+ skipped_export=false -+ else -+ # The command line is too long to execute in one step. -+ func_echo "using reloadable object file for export list..." -+ skipped_export=: -+ # Break out early, otherwise skipped_export may be -+ # set to false by a later but shorter cmd. -+ break -+ fi -+ done -+ IFS="$save_ifs" -+ if test -n "$export_symbols_regex"; then -+ func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' -+ func_show_eval '$MV "${export_symbols}T" "$export_symbols"' -+ fi - fi - fi - -- # Remove version info from name if versioning should be avoided -- if test "$avoid_version" = yes && test "$need_version" = no; then -- major= -- versuffix= -- verstring="" -+ if test -n "$export_symbols" && test -n "$include_expsyms"; then -+ tmp_export_symbols="$export_symbols" -+ test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" -+ $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' - fi - -- # Check to see if the archive will have undefined symbols. -- if test "$allow_undefined" = yes; then -- if test "$allow_undefined_flag" = unsupported; then -- func_warning "undefined symbols not allowed in $host shared libraries" -- build_libtool_libs=no -- build_old_libs=yes -- fi -- else -- # Don't allow undefined symbols. -- allow_undefined_flag="$no_undefined_flag" -+ if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then -+ # The given exports_symbols file has to be filtered, so filter it. -+ func_echo "filter symbol list for \`$libname.la' to tag DATA exports" -+ # FIXME: $output_objdir/$libname.filter potentially contains lots of -+ # 's' commands which not all seds can handle. GNU sed should be fine -+ # though. Also, the filter scales superlinearly with the number of -+ # global variables. join(1) would be nice here, but unfortunately -+ # isn't a blessed tool. -+ $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter -+ delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" -+ export_symbols=$output_objdir/$libname.def -+ $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols - fi - -- fi -- -- func_generate_dlsyms "$libname" "$libname" "yes" -- libobjs="$libobjs $symfileobj" -- test "X$libobjs" = "X " && libobjs= -- -- if test "$mode" != relink; then -- # Remove our outputs, but don't remove object files since they -- # may have been created when compiling PIC objects. -- removelist= -- tempremovelist=`$ECHO "$output_objdir/*"` -- for p in $tempremovelist; do -- case $p in -- *.$objext) -- ;; -- $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) -- if test "X$precious_files_regex" != "X"; then -- if $ECHO "$p" | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 -- then -- continue -- fi -- fi -- removelist="$removelist $p" -- ;; -- *) ;; -+ tmp_deplibs= -+ for test_deplib in $deplibs; do -+ case " $convenience " in -+ *" $test_deplib "*) ;; -+ *) -+ tmp_deplibs="$tmp_deplibs $test_deplib" -+ ;; - esac - done -- test -n "$removelist" && \ -- func_show_eval "${RM}r \$removelist" -- fi -+ deplibs="$tmp_deplibs" - -- # Now set the variables for building old libraries. -- if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then -- oldlibs="$oldlibs $output_objdir/$libname.$libext" -+ if test -n "$convenience"; then -+ if test -n "$whole_archive_flag_spec"; then -+ save_libobjs=$libobjs -+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" -+ else -+ gentop="$output_objdir/${outputname}x" -+ generated="$generated $gentop" - -- # Transform .lo files to .o files. -- oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` -- fi -+ func_extract_archives $gentop $convenience -+ libobjs="$libobjs $func_extract_archives_result" -+ fi -+ fi - -- # Eliminate all temporary directories. -- #for path in $notinst_path; do -- # lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"` -- # deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"` -- # dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"` -- #done -+ if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then -+ eval flag=\"$thread_safe_flag_spec\" -+ linker_flags="$linker_flags $flag" -+ fi - -- if test -n "$xrpath"; then -- # If the user specified any rpath flags, then add them. -- temp_xrpath= -- for libdir in $xrpath; do -- temp_xrpath="$temp_xrpath -R$libdir" -- case "$finalize_rpath " in -- *" $libdir "*) ;; -- *) finalize_rpath="$finalize_rpath $libdir" ;; -- esac -- done -- if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then -- dependency_libs="$temp_xrpath $dependency_libs" -+ # Make a backup of the uninstalled library when relinking -+ if test "$mode" = relink; then -+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? - fi -- fi - -- # Make sure dlfiles contains only unique files that won't be dlpreopened -- old_dlfiles="$dlfiles" -- dlfiles= -- for lib in $old_dlfiles; do -- case " $dlprefiles $dlfiles " in -- *" $lib "*) ;; -- *) dlfiles="$dlfiles $lib" ;; -- esac -- done -+ # Do each of the archive commands. -+ if test "$module" = yes && test -n "$module_cmds" ; then -+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then -+ eval test_cmds=\"$module_expsym_cmds\" -+ cmds=$module_expsym_cmds -+ else -+ eval test_cmds=\"$module_cmds\" -+ cmds=$module_cmds -+ fi -+ else -+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then -+ eval test_cmds=\"$archive_expsym_cmds\" -+ cmds=$archive_expsym_cmds -+ else -+ eval test_cmds=\"$archive_cmds\" -+ cmds=$archive_cmds -+ fi -+ fi - -- # Make sure dlprefiles contains only unique files -- old_dlprefiles="$dlprefiles" -- dlprefiles= -- for lib in $old_dlprefiles; do -- case "$dlprefiles " in -- *" $lib "*) ;; -- *) dlprefiles="$dlprefiles $lib" ;; -- esac -- done -+ if test "X$skipped_export" != "X:" && -+ len=`expr "X$test_cmds" : ".*" 2>/dev/null` && -+ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then -+ : -+ else -+ # The command line is too long to link in one step, link piecewise -+ # or, if using GNU ld and skipped_export is not :, use a linker -+ # script. - -- if test "$build_libtool_libs" = yes; then -- if test -n "$rpath"; then -- case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos*) -- # these systems don't actually have a c library (as such)! -- ;; -- *-*-rhapsody* | *-*-darwin1.[012]) -- # Rhapsody C library is in the System framework -- deplibs="$deplibs System.ltframework" -- ;; -- *-*-netbsd*) -- # Don't link with libc until the a.out ld.so is fixed. -- ;; -- *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) -- # Do not include libc due to us having libc/libc_r. -- ;; -- *-*-sco3.2v5* | *-*-sco5v6*) -- # Causes problems with __ctype -- ;; -- *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) -- # Compiler inserts libc in the correct place for threads to work -- ;; -- *) -- # Add libc to deplibs on all other systems if necessary. -- if test "$build_libtool_need_lc" = "yes"; then -- deplibs="$deplibs -lc" -- fi -- ;; -- esac -- fi -+ # Save the value of $output and $libobjs because we want to -+ # use them later. If we have whole_archive_flag_spec, we -+ # want to use save_libobjs as it was before -+ # whole_archive_flag_spec was expanded, because we can't -+ # assume the linker understands whole_archive_flag_spec. -+ # This may have to be revisited, in case too many -+ # convenience libraries get linked in and end up exceeding -+ # the spec. -+ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then -+ save_libobjs=$libobjs -+ fi -+ save_output=$output -+ output_la=`$ECHO "X$output" | $Xsed -e "$basename"` -+ -+ # Clear the reloadable object creation command queue and -+ # initialize k to one. -+ test_cmds= -+ concat_cmds= -+ objlist= -+ last_robj= -+ k=1 - -- # Transform deplibs into only deplibs that can be linked in shared. -- name_save=$name -- libname_save=$libname -- release_save=$release -- versuffix_save=$versuffix -- major_save=$major -- # I'm not sure if I'm treating the release correctly. I think -- # release should show up in the -l (ie -lgmp5) so we don't want to -- # add it in twice. Is that correct? -- release="" -- versuffix="" -- major="" -- newdeplibs= -- droppeddeps=no -- case $deplibs_check_method in -- pass_all) -- # Don't check for shared/static. Everything works. -- # This might be a little naive. We might want to check -- # whether the library exists or not. But this is on -- # osf3 & osf4 and I'm not really sure... Just -- # implementing what was already the behavior. -- newdeplibs=$deplibs -- ;; -- test_compile) -- # This code stresses the "libraries are programs" paradigm to its -- # limits. Maybe even breaks it. We compile a program, linking it -- # against the deplibs as a proxy for the library. Then we can check -- # whether they linked in statically or dynamically with ldd. -- $opt_dry_run || $RM conftest.c -- cat > conftest.c < $output -+ for obj in $save_libobjs -+ do -+ $ECHO \""$obj"\" >> $output -+ done -+ $ECHO ')' >> $output -+ delfiles="$delfiles $output" -+ elif test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then -+ output=${output_objdir}/${output_la}.lnk -+ func_echo "creating linker input file list: $output" -+ : > $output -+ for obj in $save_libobjs -+ do -+ $ECHO "$obj" >> $output - done -+ delfiles="$delfiles $output" -+ output=\"$file_list_spec$output\" - else -- # Error occurred in the first compile. Let's try to salvage -- # the situation: Compile a separate program for each library. -- for i in $deplibs; do -- name=`expr $i : '-l\(.*\)'` -- # If $name is empty we are operating on a -L argument. -- if test "$name" != "" && test "$name" != "0"; then -- $opt_dry_run || $RM conftest -- if $LTCC $LTCFLAGS -o conftest conftest.c $i; then -- ldd_output=`ldd conftest` -- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -- case " $predeps $postdeps " in -- *" $i "*) -- newdeplibs="$newdeplibs $i" -- i="" -- ;; -- esac -- fi -- if test -n "$i" ; then -- libname=`eval "\\$ECHO \"$libname_spec\""` -- deplib_matches=`eval "\\$ECHO \"$library_names_spec\""` -- set dummy $deplib_matches; shift -- deplib_match=$1 -- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then -- newdeplibs="$newdeplibs $i" -- else -- droppeddeps=yes -- $ECHO -- $ECHO "*** Warning: dynamic linker does not accept needed library $i." -- $ECHO "*** I have the capability to make that library automatically link in when" -- $ECHO "*** you link to this library. But I can only do this if you have a" -- $ECHO "*** shared version of the library, which you do not appear to have" -- $ECHO "*** because a test_compile did reveal that the linker did not use this one" -- $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime." -- fi -- fi -- else -- droppeddeps=yes -- $ECHO -- $ECHO "*** Warning! Library $i is needed by this library but I was not able to" -- $ECHO "*** make it link in! You will probably need to install it or some" -- $ECHO "*** library that it depends on before this library will be fully" -- $ECHO "*** functional. Installing it before continuing would be even better." -- fi -+ func_echo "creating reloadable object files..." -+ output=$output_objdir/$output_la-${k}.$objext -+ # Loop over the list of objects to be linked. -+ for obj in $save_libobjs -+ do -+ eval test_cmds=\"$reload_cmds $objlist $last_robj\" -+ if test "X$objlist" = X || -+ { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && -+ test "$len" -le "$max_cmd_len"; }; then -+ objlist="$objlist $obj" - else -- newdeplibs="$newdeplibs $i" -- fi -- done -- fi -- ;; -- file_magic*) -- set dummy $deplibs_check_method; shift -- file_magic_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` -- for a_deplib in $deplibs; do -- name=`expr $a_deplib : '-l\(.*\)'` -- # If $name is empty we are operating on a -L argument. -- if test "$name" != "" && test "$name" != "0"; then -- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -- case " $predeps $postdeps " in -- *" $a_deplib "*) -- newdeplibs="$newdeplibs $a_deplib" -- a_deplib="" -- ;; -- esac -- fi -- if test -n "$a_deplib" ; then -- libname=`eval "\\$ECHO \"$libname_spec\""` -- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do -- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` -- for potent_lib in $potential_libs; do -- # Follow soft links. -- if ls -lLd "$potent_lib" 2>/dev/null | -- $GREP " -> " >/dev/null; then -- continue -- fi -- # The statement above tries to avoid entering an -- # endless loop below, in case of cyclic links. -- # We might still enter an endless loop, since a link -- # loop can be closed while we follow links, -- # but so what? -- potlib="$potent_lib" -- while test -h "$potlib" 2>/dev/null; do -- potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` -- case $potliblink in -- [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; -- *) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; -- esac -- done -- if eval $file_magic_cmd \"\$potlib\" 2>/dev/null | -- $SED -e 10q | -- $EGREP "$file_magic_regex" > /dev/null; then -- newdeplibs="$newdeplibs $a_deplib" -- a_deplib="" -- break 2 -- fi -- done -- done -- fi -- if test -n "$a_deplib" ; then -- droppeddeps=yes -- $ECHO -- $ECHO "*** Warning: linker path does not have real file for library $a_deplib." -- $ECHO "*** I have the capability to make that library automatically link in when" -- $ECHO "*** you link to this library. But I can only do this if you have a" -- $ECHO "*** shared version of the library, which you do not appear to have" -- $ECHO "*** because I did check the linker path looking for a file starting" -- if test -z "$potlib" ; then -- $ECHO "*** with $libname but no candidates were found. (...for file magic test)" -+ # The command $test_cmds is almost too long, add a -+ # command to the queue. -+ if test "$k" -eq 1 ; then -+ # The first file doesn't have a previous command to add. -+ eval concat_cmds=\"$reload_cmds $objlist $last_robj\" - else -- $ECHO "*** with $libname and none of the candidates passed a file format test" -- $ECHO "*** using a file magic. Last file checked: $potlib" -+ # All subsequent reloadable object files will link in -+ # the last one created. -+ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" - fi -+ last_robj=$output_objdir/$output_la-${k}.$objext -+ k=`expr $k + 1` -+ output=$output_objdir/$output_la-${k}.$objext -+ objlist=$obj -+ len=1 - fi -- else -- # Add a -L argument. -- newdeplibs="$newdeplibs $a_deplib" -+ done -+ # Handle the remaining objects by creating one last -+ # reloadable object file. All subsequent reloadable object -+ # files will link in the last one created. -+ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ -+ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" -+ -+ if ${skipped_export-false}; then -+ func_echo "generating symbol list for \`$libname.la'" -+ export_symbols="$output_objdir/$libname.exp" -+ $opt_dry_run || $RM $export_symbols -+ libobjs=$output -+ # Append the command to create the export file. -+ eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" - fi -- done # Gone through all deplibs. -- ;; -- match_pattern*) -- set dummy $deplibs_check_method; shift -- match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"` -- for a_deplib in $deplibs; do -- name=`expr $a_deplib : '-l\(.*\)'` -- # If $name is empty we are operating on a -L argument. -- if test -n "$name" && test "$name" != "0"; then -- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -- case " $predeps $postdeps " in -- *" $a_deplib "*) -- newdeplibs="$newdeplibs $a_deplib" -- a_deplib="" -- ;; -- esac -- fi -- if test -n "$a_deplib" ; then -- libname=`eval "\\$ECHO \"$libname_spec\""` -- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do -- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` -- for potent_lib in $potential_libs; do -- potlib="$potent_lib" # see symlink-check above in file_magic test -- if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \ -- $EGREP "$match_pattern_regex" > /dev/null; then -- newdeplibs="$newdeplibs $a_deplib" -- a_deplib="" -- break 2 -- fi -- done -- done -- fi -- if test -n "$a_deplib" ; then -- droppeddeps=yes -- $ECHO -- $ECHO "*** Warning: linker path does not have real file for library $a_deplib." -- $ECHO "*** I have the capability to make that library automatically link in when" -- $ECHO "*** you link to this library. But I can only do this if you have a" -- $ECHO "*** shared version of the library, which you do not appear to have" -- $ECHO "*** because I did check the linker path looking for a file starting" -- if test -z "$potlib" ; then -- $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)" -- else -- $ECHO "*** with $libname and none of the candidates passed a file format test" -- $ECHO "*** using a regex pattern. Last file checked: $potlib" -+ -+ # Set up a command to remove the reloadable object files -+ # after they are used. -+ i=0 -+ while test "$i" -lt "$k" -+ do -+ i=`expr $i + 1` -+ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" -+ done -+ -+ func_echo "creating a temporary reloadable object file: $output" -+ -+ # Loop through the commands generated above and execute them. -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $concat_cmds; do -+ IFS="$save_ifs" -+ $opt_silent || { -+ func_quote_for_expand "$cmd" -+ eval "func_echo $func_quote_for_expand_result" -+ } -+ $opt_dry_run || eval "$cmd" || { -+ lt_exit=$? -+ -+ # Restore the uninstalled library and exit -+ if test "$mode" = relink; then -+ ( cd "$output_objdir" && \ -+ $RM "${realname}T" && \ -+ $MV "${realname}U" "$realname" ) - fi -- fi -- else -- # Add a -L argument. -- newdeplibs="$newdeplibs $a_deplib" -- fi -- done # Gone through all deplibs. -- ;; -- none | unknown | *) -- newdeplibs="" -- tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \ -- -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'` -- if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then -- for i in $predeps $postdeps ; do -- # can't use Xsed below, because $i might contain '/' -- tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"` -+ -+ exit $lt_exit -+ } - done -+ IFS="$save_ifs" - fi -- if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' | -- $GREP . >/dev/null; then -- $ECHO -- if test "X$deplibs_check_method" = "Xnone"; then -- $ECHO "*** Warning: inter-library dependencies are not supported in this platform." -+ -+ libobjs=$output -+ # Restore the value of output. -+ output=$save_output -+ -+ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then -+ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" -+ fi -+ # Expand the library linking commands again to reset the -+ # value of $libobjs for piecewise linking. -+ -+ # Do each of the archive commands. -+ if test "$module" = yes && test -n "$module_cmds" ; then -+ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then -+ cmds=$module_expsym_cmds - else -- $ECHO "*** Warning: inter-library dependencies are not known to be supported." -+ cmds=$module_cmds -+ fi -+ else -+ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then -+ cmds=$archive_expsym_cmds -+ else -+ cmds=$archive_cmds - fi -- $ECHO "*** All declared inter-library dependencies are being dropped." -- droppeddeps=yes - fi -- ;; -- esac -- versuffix=$versuffix_save -- major=$major_save -- release=$release_save -- libname=$libname_save -- name=$name_save -+ fi - -- case $host in -- *-*-rhapsody* | *-*-darwin1.[012]) -- # On Rhapsody replace the C library with the System framework -- newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'` -- ;; -- esac -+ if test -n "$delfiles"; then -+ # Append the command to remove temporary files to $cmds. -+ eval cmds=\"\$cmds~\$RM $delfiles\" -+ fi - -- if test "$droppeddeps" = yes; then -- if test "$module" = yes; then -- $ECHO -- $ECHO "*** Warning: libtool could not satisfy all declared inter-library" -- $ECHO "*** dependencies of module $libname. Therefore, libtool will create" -- $ECHO "*** a static module, that should work as long as the dlopening" -- $ECHO "*** application is linked with the -dlopen flag." -- if test -z "$global_symbol_pipe"; then -- $ECHO -- $ECHO "*** However, this would only work if libtool was able to extract symbol" -- $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could" -- $ECHO "*** not find such a program. So, this module is probably useless." -- $ECHO "*** \`nm' from GNU binutils and a full rebuild may help." -- fi -- if test "$build_old_libs" = no; then -- oldlibs="$output_objdir/$libname.$libext" -- build_libtool_libs=module -- build_old_libs=yes -- else -- build_libtool_libs=no -+ # Add any objects from preloaded convenience libraries -+ if test -n "$dlprefiles"; then -+ gentop="$output_objdir/${outputname}x" -+ generated="$generated $gentop" -+ -+ func_extract_archives $gentop $dlprefiles -+ libobjs="$libobjs $func_extract_archives_result" -+ fi -+ -+ save_ifs="$IFS"; IFS='~' -+ for cmd in $cmds; do -+ IFS="$save_ifs" -+ eval cmd=\"$cmd\" -+ $opt_silent || { -+ func_quote_for_expand "$cmd" -+ eval "func_echo $func_quote_for_expand_result" -+ } -+ $opt_dry_run || eval "$cmd" || { -+ lt_exit=$? -+ -+ # Restore the uninstalled library and exit -+ if test "$mode" = relink; then -+ ( cd "$output_objdir" && \ -+ $RM "${realname}T" && \ -+ $MV "${realname}U" "$realname" ) - fi -- else -- $ECHO "*** The inter-library dependencies that have been dropped here will be" -- $ECHO "*** automatically added whenever a program is linked with this library" -- $ECHO "*** or is declared to -dlopen it." - -- if test "$allow_undefined" = no; then -- $ECHO -- $ECHO "*** Since this library must not contain undefined symbols," -- $ECHO "*** because either the platform does not support them or" -- $ECHO "*** it was explicitly requested with -no-undefined," -- $ECHO "*** libtool will only create a static version of it." -- if test "$build_old_libs" = no; then -- oldlibs="$output_objdir/$libname.$libext" -- build_libtool_libs=module -- build_old_libs=yes -- else -- build_libtool_libs=no -- fi -+ exit $lt_exit -+ } -+ done -+ IFS="$save_ifs" -+ -+ # Restore the uninstalled library and exit -+ if test "$mode" = relink; then -+ $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? -+ -+ if test -n "$convenience"; then -+ if test -z "$whole_archive_flag_spec"; then -+ func_show_eval '${RM}r "$gentop"' - fi - fi -+ -+ exit $EXIT_SUCCESS - fi -- # Done checking deplibs! -- deplibs=$newdeplibs -+ -+ # Create links to the real library. -+ for linkname in $linknames; do -+ if test "$realname" != "$linkname"; then -+ func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' -+ fi -+ done -+ -+ # If -module or -export-dynamic was specified, set the dlname. -+ if test "$module" = yes || test "$export_dynamic" = yes; then -+ # On all known operating systems, these are identical. -+ dlname="$soname" -+ fi -+ fi -+ ;; -+ -+ obj) -+ if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -+ func_warning "\`-dlopen' is ignored for objects" -+ fi -+ -+ test -n "$deplibs" && \ -+ func_warning "\`-l' and \`-L' are ignored for objects" -+ -+ test -n "$rpath" && \ -+ func_warning "\`-rpath' is ignored for objects" -+ -+ test -n "$xrpath" && \ -+ func_warning "\`-R' is ignored for objects" -+ -+ test -n "$vinfo" && \ -+ func_warning "\`-version-info' is ignored for objects" -+ -+ test -n "$release" && \ -+ func_warning "\`-release' is ignored for objects" -+ -+ case $output in -+ *.lo) -+ test -n "$objs$old_deplibs" && \ -+ func_fatal_error "cannot build library object \`$output' from non-libtool objects" -+ -+ libobj="$output" -+ obj=`$ECHO "X$output" | $Xsed -e "$lo2o"` -+ ;; -+ *) -+ libobj= -+ obj="$output" -+ ;; -+ esac -+ -+ # Delete the old objects. -+ $opt_dry_run || $RM $obj $libobj -+ -+ # Objects from convenience libraries. This assumes -+ # single-version convenience libraries. Whenever we create -+ # different ones for PIC/non-PIC, this we'll have to duplicate -+ # the extraction. -+ reload_conv_objs= -+ gentop= -+ # reload_cmds runs $LD directly, so let us get rid of -+ # -Wl from whole_archive_flag_spec -+ wl= -+ -+ if test -n "$convenience"; then -+ if test -n "$whole_archive_flag_spec"; then -+ eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" -+ else -+ gentop="$output_objdir/${obj}x" -+ generated="$generated $gentop" -+ -+ func_extract_archives $gentop $convenience -+ reload_conv_objs="$reload_objs $func_extract_archives_result" -+ fi -+ fi -+ -+ # Create the old-style object. -+ reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test -+ -+ output="$obj" -+ func_execute_cmds "$reload_cmds" 'exit $?' -+ -+ # Exit if we aren't doing a library object file. -+ if test -z "$libobj"; then -+ if test -n "$gentop"; then -+ func_show_eval '${RM}r "$gentop"' -+ fi -+ -+ exit $EXIT_SUCCESS -+ fi -+ -+ if test "$build_libtool_libs" != yes; then -+ if test -n "$gentop"; then -+ func_show_eval '${RM}r "$gentop"' -+ fi -+ -+ # Create an invalid libtool object if no PIC, so that we don't -+ # accidentally link it into a program. -+ # $show "echo timestamp > $libobj" -+ # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? -+ exit $EXIT_SUCCESS - fi -- # Time to change all our "foo.ltframework" stuff back to "-framework foo" -+ -+ if test -n "$pic_flag" || test "$pic_mode" != default; then -+ # Only do commands if we really have different PIC objects. -+ reload_objs="$libobjs $reload_conv_objs" -+ output="$libobj" -+ func_execute_cmds "$reload_cmds" 'exit $?' -+ fi -+ -+ if test -n "$gentop"; then -+ func_show_eval '${RM}r "$gentop"' -+ fi -+ -+ exit $EXIT_SUCCESS -+ ;; -+ -+ prog) - case $host in -- *-*-darwin*) -- newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -- new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -- deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -- ;; -+ *cygwin*) func_stripname '' '.exe' "$output" -+ output=$func_stripname_result.exe;; -+ esac -+ test -n "$vinfo" && \ -+ func_warning "\`-version-info' is ignored for programs" -+ -+ test -n "$release" && \ -+ func_warning "\`-release' is ignored for programs" -+ -+ test "$preload" = yes \ -+ && test "$dlopen_support" = unknown \ -+ && test "$dlopen_self" = unknown \ -+ && test "$dlopen_self_static" = unknown && \ -+ func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." -+ -+ case $host in -+ *-*-rhapsody* | *-*-darwin1.[012]) -+ # On Rhapsody replace the C library is the System framework -+ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` -+ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` -+ ;; -+ esac -+ -+ case $host in -+ *-*-darwin*) -+ # Don't allow lazy linking, it breaks C++ global constructors -+ # But is supposedly fixed on 10.4 or later (yay!). -+ if test "$tagname" = CXX ; then -+ case ${MACOSX_DEPLOYMENT_TARGET-10.0} in -+ 10.[0123]) -+ compile_command="$compile_command ${wl}-bind_at_load" -+ finalize_command="$finalize_command ${wl}-bind_at_load" -+ ;; -+ esac -+ fi -+ # Time to change all our "foo.ltframework" stuff back to "-framework foo" -+ compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -+ finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -+ ;; - esac - -+ - # move library search paths that coincide with paths to not yet - # installed libraries to the beginning of the library search list - new_libs= -@@ -5919,14 +5960,14 @@ EOF - case " $new_libs " in - *" -L$path/$objdir "*) ;; - *) -- case " $deplibs " in -+ case " $compile_deplibs " in - *" -L$path/$objdir "*) - new_libs="$new_libs -L$path/$objdir" ;; - esac - ;; - esac - done -- for deplib in $deplibs; do -+ for deplib in $compile_deplibs; do - case $deplib in - -L*) - case " $new_libs " in -@@ -5937,964 +5978,803 @@ EOF - *) new_libs="$new_libs $deplib" ;; - esac - done -- deplibs="$new_libs" -- -- # All the library-specific variables (install_libdir is set above). -- library_names= -- old_library= -- dlname= -- -- # Test again, we may have decided not to build it any more -- if test "$build_libtool_libs" = yes; then -- if test "$hardcode_into_libs" = yes; then -- # Hardcode the library paths -- hardcode_libdirs= -- dep_rpath= -- rpath="$finalize_rpath" -- test "$mode" != relink && rpath="$compile_rpath$rpath" -- for libdir in $rpath; do -- if test -n "$hardcode_libdir_flag_spec"; then -- if test -n "$hardcode_libdir_separator"; then -- if test -z "$hardcode_libdirs"; then -- hardcode_libdirs="$libdir" -- else -- # Just accumulate the unique libdirs. -- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -- ;; -- *) -- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -- ;; -- esac -- fi -- else -- eval flag=\"$hardcode_libdir_flag_spec\" -- dep_rpath="$dep_rpath $flag" -- fi -- elif test -n "$runpath_var"; then -- case "$perm_rpath " in -- *" $libdir "*) ;; -- *) perm_rpath="$perm_rpath $libdir" ;; -- esac -- fi -- done -- # Substitute the hardcoded libdirs into the rpath. -- if test -n "$hardcode_libdir_separator" && -- test -n "$hardcode_libdirs"; then -- libdir="$hardcode_libdirs" -- if test -n "$hardcode_libdir_flag_spec_ld"; then -- eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" -- else -- eval dep_rpath=\"$hardcode_libdir_flag_spec\" -- fi -- fi -- if test -n "$runpath_var" && test -n "$perm_rpath"; then -- # We should set the runpath_var. -- rpath= -- for dir in $perm_rpath; do -- rpath="$rpath$dir:" -- done -- eval "$runpath_var='$rpath\$$runpath_var'; export $runpath_var" -- fi -- test -n "$dep_rpath" && deplibs="$dep_rpath $deplibs" -- fi -- -- shlibpath="$finalize_shlibpath" -- test "$mode" != relink && shlibpath="$compile_shlibpath$shlibpath" -- if test -n "$shlibpath"; then -- eval "$shlibpath_var='$shlibpath\$$shlibpath_var'; export $shlibpath_var" -- fi -+ compile_deplibs="$new_libs" - -- # Get the real and link names of the library. -- eval shared_ext=\"$shrext_cmds\" -- eval library_names=\"$library_names_spec\" -- set dummy $library_names -- shift -- realname="$1" -- shift - -- if test -n "$soname_spec"; then -- eval soname=\"$soname_spec\" -- else -- soname="$realname" -- fi -- if test -z "$dlname"; then -- dlname=$soname -- fi -+ compile_command="$compile_command $compile_deplibs" -+ finalize_command="$finalize_command $finalize_deplibs" - -- lib="$output_objdir/$realname" -- linknames= -- for link -- do -- linknames="$linknames $link" -+ if test -n "$rpath$xrpath"; then -+ # If the user specified any rpath flags, then add them. -+ for libdir in $rpath $xrpath; do -+ # This is the magic to use -rpath. -+ case "$finalize_rpath " in -+ *" $libdir "*) ;; -+ *) finalize_rpath="$finalize_rpath $libdir" ;; -+ esac - done -+ fi - -- # Use standard objects if they are pic -- test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -- test "X$libobjs" = "X " && libobjs= -- -- delfiles= -- if test -n "$export_symbols" && test -n "$include_expsyms"; then -- $opt_dry_run || cp "$export_symbols" "$output_objdir/$libname.uexp" -- export_symbols="$output_objdir/$libname.uexp" -- delfiles="$delfiles $export_symbols" -- fi -- -- orig_export_symbols= -- case $host_os in -- cygwin* | mingw*) -- if test -n "$export_symbols" && test -z "$export_symbols_regex"; then -- # exporting using user supplied symfile -- if test "x`$SED 1q $export_symbols`" != xEXPORTS; then -- # and it's NOT already a .def file. Must figure out -- # which of the given symbols are data symbols and tag -- # them as such. So, trigger use of export_symbols_cmds. -- # export_symbols gets reassigned inside the "prepare -- # the list of exported symbols" if statement, so the -- # include_expsyms logic still works. -- orig_export_symbols="$export_symbols" -- export_symbols= -- always_export_symbols=yes -+ # Now hardcode the library paths -+ rpath= -+ hardcode_libdirs= -+ for libdir in $compile_rpath $finalize_rpath; do -+ if test -n "$hardcode_libdir_flag_spec"; then -+ if test -n "$hardcode_libdir_separator"; then -+ if test -z "$hardcode_libdirs"; then -+ hardcode_libdirs="$libdir" -+ else -+ # Just accumulate the unique libdirs. -+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -+ ;; -+ *) -+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -+ ;; -+ esac - fi -+ else -+ eval flag=\"$hardcode_libdir_flag_spec\" -+ rpath="$rpath $flag" - fi -+ elif test -n "$runpath_var"; then -+ case "$perm_rpath " in -+ *" $libdir "*) ;; -+ *) perm_rpath="$perm_rpath $libdir" ;; -+ esac -+ fi -+ case $host in -+ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -+ testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` -+ case :$dllsearchpath: in -+ *":$libdir:"*) ;; -+ *) dllsearchpath="$dllsearchpath:$libdir";; -+ esac -+ case :$dllsearchpath: in -+ *":$testbindir:"*) ;; -+ *) dllsearchpath="$dllsearchpath:$testbindir";; -+ esac - ;; -- esac -- -- # Prepare the list of exported symbols -- if test -z "$export_symbols"; then -- if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then -- func_echo "generating symbol list for \`$libname.la'" -- export_symbols="$output_objdir/$libname.exp" -- $opt_dry_run || $RM $export_symbols -- cmds=$export_symbols_cmds -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- eval cmd=\"$cmd\" -- if len=`expr "X$cmd" : ".*"` && -- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then -- func_show_eval "$cmd" 'exit $?' -- skipped_export=false -- else -- # The command line is too long to execute in one step. -- func_echo "using reloadable object file for export list..." -- skipped_export=: -- # Break out early, otherwise skipped_export may be -- # set to false by a later but shorter cmd. -- break -- fi -- done -- IFS="$save_ifs" -- if test -n "$export_symbols_regex" && test "X$skipped_export" != "X:"; then -- func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' -- func_show_eval '$MV "${export_symbols}T" "$export_symbols"' -+ esac -+ done -+ # Substitute the hardcoded libdirs into the rpath. -+ if test -n "$hardcode_libdir_separator" && -+ test -n "$hardcode_libdirs"; then -+ libdir="$hardcode_libdirs" -+ eval rpath=\" $hardcode_libdir_flag_spec\" -+ fi -+ compile_rpath="$rpath" -+ -+ rpath= -+ hardcode_libdirs= -+ for libdir in $finalize_rpath; do -+ if test -n "$hardcode_libdir_flag_spec"; then -+ if test -n "$hardcode_libdir_separator"; then -+ if test -z "$hardcode_libdirs"; then -+ hardcode_libdirs="$libdir" -+ else -+ # Just accumulate the unique libdirs. -+ case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -+ *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -+ ;; -+ *) -+ hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -+ ;; -+ esac - fi -+ else -+ eval flag=\"$hardcode_libdir_flag_spec\" -+ rpath="$rpath $flag" - fi -+ elif test -n "$runpath_var"; then -+ case "$finalize_perm_rpath " in -+ *" $libdir "*) ;; -+ *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; -+ esac - fi -+ done -+ # Substitute the hardcoded libdirs into the rpath. -+ if test -n "$hardcode_libdir_separator" && -+ test -n "$hardcode_libdirs"; then -+ libdir="$hardcode_libdirs" -+ eval rpath=\" $hardcode_libdir_flag_spec\" -+ fi -+ finalize_rpath="$rpath" - -- if test -n "$export_symbols" && test -n "$include_expsyms"; then -- tmp_export_symbols="$export_symbols" -- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" -- $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' -- fi -+ if test -n "$libobjs" && test "$build_old_libs" = yes; then -+ # Transform all the library objects into standard objects. -+ compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -+ fi - -- if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then -- # The given exports_symbols file has to be filtered, so filter it. -- func_echo "filter symbol list for \`$libname.la' to tag DATA exports" -- # FIXME: $output_objdir/$libname.filter potentially contains lots of -- # 's' commands which not all seds can handle. GNU sed should be fine -- # though. Also, the filter scales superlinearly with the number of -- # global variables. join(1) would be nice here, but unfortunately -- # isn't a blessed tool. -- $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter -- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" -- export_symbols=$output_objdir/$libname.def -- $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols -- fi -+ func_generate_dlsyms "$outputname" "@PROGRAM@" "no" - -- tmp_deplibs= -- for test_deplib in $deplibs; do -- case " $convenience " in -- *" $test_deplib "*) ;; -- *) -- tmp_deplibs="$tmp_deplibs $test_deplib" -- ;; -- esac -- done -- deplibs="$tmp_deplibs" -+ # template prelinking step -+ if test -n "$prelink_cmds"; then -+ func_execute_cmds "$prelink_cmds" 'exit $?' -+ fi - -- if test -n "$convenience"; then -- if test -n "$whole_archive_flag_spec" && -- test "$compiler_needs_object" = yes && -- test -z "$libobjs"; then -- # extract the archives, so we have objects to list. -- # TODO: could optimize this to just extract one archive. -- whole_archive_flag_spec= -- fi -- if test -n "$whole_archive_flag_spec"; then -- save_libobjs=$libobjs -- eval libobjs=\"\$libobjs $whole_archive_flag_spec\" -- test "X$libobjs" = "X " && libobjs= -- else -- gentop="$output_objdir/${outputname}x" -- generated="$generated $gentop" -+ wrappers_required=yes -+ case $host in -+ *cygwin* | *mingw* ) -+ if test "$build_libtool_libs" != yes; then -+ wrappers_required=no -+ fi -+ ;; -+ *) -+ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then -+ wrappers_required=no -+ fi -+ ;; -+ esac -+ if test "$wrappers_required" = no; then -+ # Replace the output file specification. -+ compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` -+ link_command="$compile_command$compile_rpath" - -- func_extract_archives $gentop $convenience -- libobjs="$libobjs $func_extract_archives_result" -- test "X$libobjs" = "X " && libobjs= -- fi -- fi -+ # We have no uninstalled library dependencies, so finalize right now. -+ exit_status=0 -+ func_show_eval "$link_command" 'exit_status=$?' - -- if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then -- eval flag=\"$thread_safe_flag_spec\" -- linker_flags="$linker_flags $flag" -+ # Delete the generated files. -+ if test -f "$output_objdir/${outputname}S.${objext}"; then -+ func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' - fi - -- # Make a backup of the uninstalled library when relinking -- if test "$mode" = relink; then -- $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}U && $MV $realname ${realname}U)' || exit $? -- fi -+ exit $exit_status -+ fi - -- # Do each of the archive commands. -- if test "$module" = yes && test -n "$module_cmds" ; then -- if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then -- eval test_cmds=\"$module_expsym_cmds\" -- cmds=$module_expsym_cmds -- else -- eval test_cmds=\"$module_cmds\" -- cmds=$module_cmds -- fi -- else -- if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then -- eval test_cmds=\"$archive_expsym_cmds\" -- cmds=$archive_expsym_cmds -- else -- eval test_cmds=\"$archive_cmds\" -- cmds=$archive_cmds -- fi -- fi -+ if test -n "$compile_shlibpath$finalize_shlibpath"; then -+ compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" -+ fi -+ if test -n "$finalize_shlibpath"; then -+ finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" -+ fi - -- if test "X$skipped_export" != "X:" && -- len=`expr "X$test_cmds" : ".*" 2>/dev/null` && -- test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then -- : -- else -- # The command line is too long to link in one step, link piecewise -- # or, if using GNU ld and skipped_export is not :, use a linker -- # script. -+ compile_var= -+ finalize_var= -+ if test -n "$runpath_var"; then -+ if test -n "$perm_rpath"; then -+ # We should set the runpath_var. -+ rpath= -+ for dir in $perm_rpath; do -+ rpath="$rpath$dir:" -+ done -+ compile_var="$runpath_var=\"$rpath\$$runpath_var\" " -+ fi -+ if test -n "$finalize_perm_rpath"; then -+ # We should set the runpath_var. -+ rpath= -+ for dir in $finalize_perm_rpath; do -+ rpath="$rpath$dir:" -+ done -+ finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " -+ fi -+ fi - -- # Save the value of $output and $libobjs because we want to -- # use them later. If we have whole_archive_flag_spec, we -- # want to use save_libobjs as it was before -- # whole_archive_flag_spec was expanded, because we can't -- # assume the linker understands whole_archive_flag_spec. -- # This may have to be revisited, in case too many -- # convenience libraries get linked in and end up exceeding -- # the spec. -- if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then -- save_libobjs=$libobjs -- fi -- save_output=$output -- output_la=`$ECHO "X$output" | $Xsed -e "$basename"` -+ if test "$no_install" = yes; then -+ # We don't need to create a wrapper script. -+ link_command="$compile_var$compile_command$compile_rpath" -+ # Replace the output file specification. -+ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` -+ # Delete the old output file. -+ $opt_dry_run || $RM $output -+ # Link the executable and exit -+ func_show_eval "$link_command" 'exit $?' -+ exit $EXIT_SUCCESS -+ fi - -- # Clear the reloadable object creation command queue and -- # initialize k to one. -- test_cmds= -- concat_cmds= -- objlist= -- last_robj= -- k=1 -+ if test "$hardcode_action" = relink; then -+ # Fast installation is not supported -+ link_command="$compile_var$compile_command$compile_rpath" -+ relink_command="$finalize_var$finalize_command$finalize_rpath" - -- if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then -- output=${output_objdir}/${output_la}.lnkscript -- func_echo "creating GNU ld script: $output" -- $ECHO 'INPUT (' > $output -- for obj in $save_libobjs -- do -- $ECHO "$obj" >> $output -- done -- $ECHO ')' >> $output -- delfiles="$delfiles $output" -- elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then -- output=${output_objdir}/${output_la}.lnk -- func_echo "creating linker input file list: $output" -- : > $output -- set x $save_libobjs -- shift -- firstobj= -- if test "$compiler_needs_object" = yes; then -- firstobj="$1 " -- shift -- fi -- for obj -- do -- $ECHO "$obj" >> $output -- done -- delfiles="$delfiles $output" -- output=$firstobj\"$file_list_spec$output\" -+ func_warning "this platform does not like uninstalled shared libraries" -+ func_warning "\`$output' will be relinked during installation" -+ else -+ if test "$fast_install" != no; then -+ link_command="$finalize_var$compile_command$finalize_rpath" -+ if test "$fast_install" = yes; then -+ relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` - else -- if test -n "$save_libobjs"; then -- func_echo "creating reloadable object files..." -- output=$output_objdir/$output_la-${k}.$objext -- # Loop over the list of objects to be linked. -- for obj in $save_libobjs -- do -- eval test_cmds=\"$reload_cmds $objlist $last_robj\" -- if test "X$objlist" = X || -- { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && -- test "$len" -le "$max_cmd_len"; }; then -- objlist="$objlist $obj" -- else -- # The command $test_cmds is almost too long, add a -- # command to the queue. -- if test "$k" -eq 1 ; then -- # The first file doesn't have a previous command to add. -- eval concat_cmds=\"$reload_cmds $objlist $last_robj\" -- else -- # All subsequent reloadable object files will link in -- # the last one created. -- eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" -- fi -- last_robj=$output_objdir/$output_la-${k}.$objext -- k=`expr $k + 1` -- output=$output_objdir/$output_la-${k}.$objext -- objlist=$obj -- len=1 -- fi -- done -- # Handle the remaining objects by creating one last -- # reloadable object file. All subsequent reloadable object -- # files will link in the last one created. -- test -z "$concat_cmds" || concat_cmds=$concat_cmds~ -- eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" -- -- # Set up a command to remove the reloadable object files -- # after they are used. -- i=0 -- while test "$i" -lt "$k" -- do -- i=`expr $i + 1` -- delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" -- done -- else -- output= -- fi -- -- if ${skipped_export-false}; then -- func_echo "generating symbol list for \`$libname.la'" -- export_symbols="$output_objdir/$libname.exp" -- $opt_dry_run || $RM $export_symbols -- libobjs=$output -- # Append the command to create the export file. -- test -z "$concat_cmds" || concat_cmds=$concat_cmds~ -- eval concat_cmds=\"\$concat_cmds$export_symbols_cmds\" -- fi -+ # fast_install is set to needless -+ relink_command= -+ fi -+ else -+ link_command="$compile_var$compile_command$compile_rpath" -+ relink_command="$finalize_var$finalize_command$finalize_rpath" -+ fi -+ fi - -- test -n "$save_libobjs" && -- func_echo "creating a temporary reloadable object file: $output" -+ # Replace the output file specification. -+ link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - -- # Loop through the commands generated above and execute them. -- save_ifs="$IFS"; IFS='~' -- for cmd in $concat_cmds; do -- IFS="$save_ifs" -- $opt_silent || { -- func_quote_for_expand "$cmd" -- eval "func_echo $func_quote_for_expand_result" -- } -- $opt_dry_run || eval "$cmd" || { -- lt_exit=$? -+ # Delete the old output files. -+ $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname - -- # Restore the uninstalled library and exit -- if test "$mode" = relink; then -- ( cd "$output_objdir" && \ -- $RM "${realname}T" && \ -- $MV "${realname}U" "$realname" ) -- fi -+ func_show_eval "$link_command" 'exit $?' - -- exit $lt_exit -- } -- done -- IFS="$save_ifs" -+ # Now create the wrapper script. -+ func_echo "creating $output" - -- if test -n "$export_symbols_regex" && ${skipped_export-false}; then -- func_show_eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' -- func_show_eval '$MV "${export_symbols}T" "$export_symbols"' -- fi -+ # Quote the relink command for shipping. -+ if test -n "$relink_command"; then -+ # Preserve any variables that may affect compiler behavior -+ for var in $variables_saved_for_relink; do -+ if eval test -z \"\${$var+set}\"; then -+ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" -+ elif eval var_value=\$$var; test -z "$var_value"; then -+ relink_command="$var=; export $var; $relink_command" -+ else -+ func_quote_for_eval "$var_value" -+ relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" - fi -+ done -+ relink_command="(cd `pwd`; $relink_command)" -+ relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` -+ fi - -- if ${skipped_export-false}; then -- if test -n "$export_symbols" && test -n "$include_expsyms"; then -- tmp_export_symbols="$export_symbols" -- test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols" -- $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"' -- fi -- -- if test -n "$orig_export_symbols"; then -- # The given exports_symbols file has to be filtered, so filter it. -- func_echo "filter symbol list for \`$libname.la' to tag DATA exports" -- # FIXME: $output_objdir/$libname.filter potentially contains lots of -- # 's' commands which not all seds can handle. GNU sed should be fine -- # though. Also, the filter scales superlinearly with the number of -- # global variables. join(1) would be nice here, but unfortunately -- # isn't a blessed tool. -- $opt_dry_run || $SED -e '/[ ,]DATA/!d;s,\(.*\)\([ \,].*\),s|^\1$|\1\2|,' < $export_symbols > $output_objdir/$libname.filter -- delfiles="$delfiles $export_symbols $output_objdir/$libname.filter" -- export_symbols=$output_objdir/$libname.def -- $opt_dry_run || $SED -f $output_objdir/$libname.filter < $orig_export_symbols > $export_symbols -- fi -- fi -+ # Quote $ECHO for shipping. -+ if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then -+ case $progpath in -+ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; -+ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; -+ esac -+ qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` -+ else -+ qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` -+ fi - -- libobjs=$output -- # Restore the value of output. -- output=$save_output -+ # Only actually do things if not in dry run mode. -+ $opt_dry_run || { -+ # win32 will think the script is a binary if it has -+ # a .exe suffix, so we strip it off here. -+ case $output in -+ *.exe) func_stripname '' '.exe' "$output" -+ output=$func_stripname_result ;; -+ esac -+ # test for cygwin because mv fails w/o .exe extensions -+ case $host in -+ *cygwin*) -+ exeext=.exe -+ func_stripname '' '.exe' "$outputname" -+ outputname=$func_stripname_result ;; -+ *) exeext= ;; -+ esac -+ case $host in -+ *cygwin* | *mingw* ) -+ output_name=`basename $output` -+ output_path=`dirname $output` -+ cwrappersource="$output_path/$objdir/lt-$output_name.c" -+ cwrapper="$output_path/$output_name.exe" -+ $RM $cwrappersource $cwrapper -+ trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 - -- if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then -- eval libobjs=\"\$libobjs $whole_archive_flag_spec\" -- test "X$libobjs" = "X " && libobjs= -- fi -- # Expand the library linking commands again to reset the -- # value of $libobjs for piecewise linking. -+ cat > $cwrappersource <> $cwrappersource<<"EOF" -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include - -- save_ifs="$IFS"; IFS='~' -- for cmd in $cmds; do -- IFS="$save_ifs" -- eval cmd=\"$cmd\" -- $opt_silent || { -- func_quote_for_expand "$cmd" -- eval "func_echo $func_quote_for_expand_result" -- } -- $opt_dry_run || eval "$cmd" || { -- lt_exit=$? -+#if defined(PATH_MAX) -+# define LT_PATHMAX PATH_MAX -+#elif defined(MAXPATHLEN) -+# define LT_PATHMAX MAXPATHLEN -+#else -+# define LT_PATHMAX 1024 -+#endif - -- # Restore the uninstalled library and exit -- if test "$mode" = relink; then -- ( cd "$output_objdir" && \ -- $RM "${realname}T" && \ -- $MV "${realname}U" "$realname" ) -- fi -+#ifndef DIR_SEPARATOR -+# define DIR_SEPARATOR '/' -+# define PATH_SEPARATOR ':' -+#endif - -- exit $lt_exit -- } -- done -- IFS="$save_ifs" -+#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ -+ defined (__OS2__) -+# define HAVE_DOS_BASED_FILE_SYSTEM -+# ifndef DIR_SEPARATOR_2 -+# define DIR_SEPARATOR_2 '\\' -+# endif -+# ifndef PATH_SEPARATOR_2 -+# define PATH_SEPARATOR_2 ';' -+# endif -+#endif - -- # Restore the uninstalled library and exit -- if test "$mode" = relink; then -- $opt_dry_run || eval '(cd $output_objdir && $RM ${realname}T && $MV $realname ${realname}T && $MV ${realname}U $realname)' || exit $? -+#ifndef DIR_SEPARATOR_2 -+# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) -+#else /* DIR_SEPARATOR_2 */ -+# define IS_DIR_SEPARATOR(ch) \ -+ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) -+#endif /* DIR_SEPARATOR_2 */ - -- if test -n "$convenience"; then -- if test -z "$whole_archive_flag_spec"; then -- func_show_eval '${RM}r "$gentop"' -- fi -- fi -+#ifndef PATH_SEPARATOR_2 -+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) -+#else /* PATH_SEPARATOR_2 */ -+# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) -+#endif /* PATH_SEPARATOR_2 */ - -- exit $EXIT_SUCCESS -- fi -+#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) -+#define XFREE(stale) do { \ -+ if (stale) { free ((void *) stale); stale = 0; } \ -+} while (0) - -- # Create links to the real library. -- for linkname in $linknames; do -- if test "$realname" != "$linkname"; then -- func_show_eval '(cd "$output_objdir" && $RM "$linkname" && $LN_S "$realname" "$linkname")' 'exit $?' -- fi -- done -+/* -DDEBUG is fairly common in CFLAGS. */ -+#undef DEBUG -+#if defined DEBUGWRAPPER -+# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) -+#else -+# define DEBUG(format, ...) -+#endif - -- # If -module or -export-dynamic was specified, set the dlname. -- if test "$module" = yes || test "$export_dynamic" = yes; then -- # On all known operating systems, these are identical. -- dlname="$soname" -- fi -- fi -- ;; -+const char *program_name = NULL; - -- obj) -- if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then -- func_warning "\`-dlopen' is ignored for objects" -- fi -+void * xmalloc (size_t num); -+char * xstrdup (const char *string); -+const char * base_name (const char *name); -+char * find_executable(const char *wrapper); -+int check_executable(const char *path); -+char * strendzap(char *str, const char *pat); -+void lt_fatal (const char *message, ...); - -- test -n "$deplibs" && \ -- func_warning "\`-l' and \`-L' are ignored for objects" -+int -+main (int argc, char *argv[]) -+{ -+ char **newargz; -+ int i; -+ -+ program_name = (char *) xstrdup (base_name (argv[0])); -+ DEBUG("(main) argv[0] : %s\n",argv[0]); -+ DEBUG("(main) program_name : %s\n",program_name); -+ newargz = XMALLOC(char *, argc+2); -+EOF -+ -+ cat >> $cwrappersource <> $cwrappersource <<"EOF" -+ newargz[1] = find_executable(argv[0]); -+ if (newargz[1] == NULL) -+ lt_fatal("Couldn't find %s", argv[0]); -+ DEBUG("(main) found exe at : %s\n",newargz[1]); -+ /* we know the script has the same name, without the .exe */ -+ /* so make sure newargz[1] doesn't end in .exe */ -+ strendzap(newargz[1],".exe"); -+ for (i = 1; i < argc; i++) -+ newargz[i+1] = xstrdup(argv[i]); -+ newargz[argc+1] = NULL; - -- test -n "$rpath" && \ -- func_warning "\`-rpath' is ignored for objects" -+ for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" -+ return 127; -+} - -- case $output in -- *.lo) -- test -n "$objs$old_deplibs" && \ -- func_fatal_error "cannot build library object \`$output' from non-libtool objects" -+void * -+xmalloc (size_t num) -+{ -+ void * p = (void *) malloc (num); -+ if (!p) -+ lt_fatal ("Memory exhausted"); - -- libobj=$output -- func_lo2o "$libobj" -- obj=$func_lo2o_result -- ;; -- *) -- libobj= -- obj="$output" -- ;; -- esac -+ return p; -+} - -- # Delete the old objects. -- $opt_dry_run || $RM $obj $libobj -+char * -+xstrdup (const char *string) -+{ -+ return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL -+; -+} - -- # Objects from convenience libraries. This assumes -- # single-version convenience libraries. Whenever we create -- # different ones for PIC/non-PIC, this we'll have to duplicate -- # the extraction. -- reload_conv_objs= -- gentop= -- # reload_cmds runs $LD directly, so let us get rid of -- # -Wl from whole_archive_flag_spec and hope we can get by with -- # turning comma into space.. -- wl= -+const char * -+base_name (const char *name) -+{ -+ const char *base; - -- if test -n "$convenience"; then -- if test -n "$whole_archive_flag_spec"; then -- eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\" -- reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'` -- else -- gentop="$output_objdir/${obj}x" -- generated="$generated $gentop" -+#if defined (HAVE_DOS_BASED_FILE_SYSTEM) -+ /* Skip over the disk name in MSDOS pathnames. */ -+ if (isalpha ((unsigned char)name[0]) && name[1] == ':') -+ name += 2; -+#endif - -- func_extract_archives $gentop $convenience -- reload_conv_objs="$reload_objs $func_extract_archives_result" -- fi -- fi -+ for (base = name; *name; name++) -+ if (IS_DIR_SEPARATOR (*name)) -+ base = name + 1; -+ return base; -+} - -- # Create the old-style object. -- reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test -+int -+check_executable(const char * path) -+{ -+ struct stat st; - -- output="$obj" -- func_execute_cmds "$reload_cmds" 'exit $?' -+ DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); -+ if ((!path) || (!*path)) -+ return 0; - -- # Exit if we aren't doing a library object file. -- if test -z "$libobj"; then -- if test -n "$gentop"; then -- func_show_eval '${RM}r "$gentop"' -- fi -+ if ((stat (path, &st) >= 0) && -+ ( -+ /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ -+#if defined (S_IXOTH) -+ ((st.st_mode & S_IXOTH) == S_IXOTH) || -+#endif -+#if defined (S_IXGRP) -+ ((st.st_mode & S_IXGRP) == S_IXGRP) || -+#endif -+ ((st.st_mode & S_IXUSR) == S_IXUSR)) -+ ) -+ return 1; -+ else -+ return 0; -+} - -- exit $EXIT_SUCCESS -- fi -+/* Searches for the full path of the wrapper. Returns -+ newly allocated full path name if found, NULL otherwise */ -+char * -+find_executable (const char* wrapper) -+{ -+ int has_slash = 0; -+ const char* p; -+ const char* p_next; -+ /* static buffer for getcwd */ -+ char tmp[LT_PATHMAX + 1]; -+ int tmp_len; -+ char* concat_name; - -- if test "$build_libtool_libs" != yes; then -- if test -n "$gentop"; then -- func_show_eval '${RM}r "$gentop"' -- fi -+ DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); - -- # Create an invalid libtool object if no PIC, so that we don't -- # accidentally link it into a program. -- # $show "echo timestamp > $libobj" -- # $opt_dry_run || eval "echo timestamp > $libobj" || exit $? -- exit $EXIT_SUCCESS -- fi -+ if ((wrapper == NULL) || (*wrapper == '\0')) -+ return NULL; - -- if test -n "$pic_flag" || test "$pic_mode" != default; then -- # Only do commands if we really have different PIC objects. -- reload_objs="$libobjs $reload_conv_objs" -- output="$libobj" -- func_execute_cmds "$reload_cmds" 'exit $?' -- fi -+ /* Absolute path? */ -+#if defined (HAVE_DOS_BASED_FILE_SYSTEM) -+ if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') -+ { -+ concat_name = xstrdup (wrapper); -+ if (check_executable(concat_name)) -+ return concat_name; -+ XFREE(concat_name); -+ } -+ else -+ { -+#endif -+ if (IS_DIR_SEPARATOR (wrapper[0])) -+ { -+ concat_name = xstrdup (wrapper); -+ if (check_executable(concat_name)) -+ return concat_name; -+ XFREE(concat_name); -+ } -+#if defined (HAVE_DOS_BASED_FILE_SYSTEM) -+ } -+#endif - -- if test -n "$gentop"; then -- func_show_eval '${RM}r "$gentop"' -- fi -+ for (p = wrapper; *p; p++) -+ if (*p == '/') -+ { -+ has_slash = 1; -+ break; -+ } -+ if (!has_slash) -+ { -+ /* no slashes; search PATH */ -+ const char* path = getenv ("PATH"); -+ if (path != NULL) -+ { -+ for (p = path; *p; p = p_next) -+ { -+ const char* q; -+ size_t p_len; -+ for (q = p; *q; q++) -+ if (IS_PATH_SEPARATOR(*q)) -+ break; -+ p_len = q - p; -+ p_next = (*q == '\0' ? q : q + 1); -+ if (p_len == 0) -+ { -+ /* empty path: current directory */ -+ if (getcwd (tmp, LT_PATHMAX) == NULL) -+ lt_fatal ("getcwd failed"); -+ tmp_len = strlen(tmp); -+ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); -+ memcpy (concat_name, tmp, tmp_len); -+ concat_name[tmp_len] = '/'; -+ strcpy (concat_name + tmp_len + 1, wrapper); -+ } -+ else -+ { -+ concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); -+ memcpy (concat_name, p, p_len); -+ concat_name[p_len] = '/'; -+ strcpy (concat_name + p_len + 1, wrapper); -+ } -+ if (check_executable(concat_name)) -+ return concat_name; -+ XFREE(concat_name); -+ } -+ } -+ /* not found in PATH; assume curdir */ -+ } -+ /* Relative path | not found in path: prepend cwd */ -+ if (getcwd (tmp, LT_PATHMAX) == NULL) -+ lt_fatal ("getcwd failed"); -+ tmp_len = strlen(tmp); -+ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); -+ memcpy (concat_name, tmp, tmp_len); -+ concat_name[tmp_len] = '/'; -+ strcpy (concat_name + tmp_len + 1, wrapper); - -- exit $EXIT_SUCCESS -- ;; -+ if (check_executable(concat_name)) -+ return concat_name; -+ XFREE(concat_name); -+ return NULL; -+} - -- prog) -- case $host in -- *cygwin*) func_stripname '' '.exe' "$output" -- output=$func_stripname_result.exe;; -- esac -- test -n "$vinfo" && \ -- func_warning "\`-version-info' is ignored for programs" -+char * -+strendzap(char *str, const char *pat) -+{ -+ size_t len, patlen; - -- test -n "$release" && \ -- func_warning "\`-release' is ignored for programs" -+ assert(str != NULL); -+ assert(pat != NULL); - -- test "$preload" = yes \ -- && test "$dlopen_support" = unknown \ -- && test "$dlopen_self" = unknown \ -- && test "$dlopen_self_static" = unknown && \ -- func_warning "\`LT_INIT([dlopen])' not used. Assuming no dlopen support." -+ len = strlen(str); -+ patlen = strlen(pat); - -- case $host in -- *-*-rhapsody* | *-*-darwin1.[012]) -- # On Rhapsody replace the C library is the System framework -- compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` -- finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'` -- ;; -- esac -+ if (patlen <= len) -+ { -+ str += len - patlen; -+ if (strcmp(str, pat) == 0) -+ *str = '\0'; -+ } -+ return str; -+} - -- case $host in -- *-*-darwin*) -- # Don't allow lazy linking, it breaks C++ global constructors -- # But is supposedly fixed on 10.4 or later (yay!). -- if test "$tagname" = CXX ; then -- case ${MACOSX_DEPLOYMENT_TARGET-10.0} in -- 10.[0123]) -- compile_command="$compile_command ${wl}-bind_at_load" -- finalize_command="$finalize_command ${wl}-bind_at_load" -- ;; -- esac -- fi -- # Time to change all our "foo.ltframework" stuff back to "-framework foo" -- compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -- finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'` -- ;; -- esac -+static void -+lt_error_core (int exit_status, const char * mode, -+ const char * message, va_list ap) -+{ -+ fprintf (stderr, "%s: %s: ", program_name, mode); -+ vfprintf (stderr, message, ap); -+ fprintf (stderr, ".\n"); - -+ if (exit_status >= 0) -+ exit (exit_status); -+} - -- # move library search paths that coincide with paths to not yet -- # installed libraries to the beginning of the library search list -- new_libs= -- for path in $notinst_path; do -- case " $new_libs " in -- *" -L$path/$objdir "*) ;; -- *) -- case " $compile_deplibs " in -- *" -L$path/$objdir "*) -- new_libs="$new_libs -L$path/$objdir" ;; -- esac -- ;; -- esac -- done -- for deplib in $compile_deplibs; do -- case $deplib in -- -L*) -- case " $new_libs " in -- *" $deplib "*) ;; -- *) new_libs="$new_libs $deplib" ;; -- esac -+void -+lt_fatal (const char *message, ...) -+{ -+ va_list ap; -+ va_start (ap, message); -+ lt_error_core (EXIT_FAILURE, "FATAL", message, ap); -+ va_end (ap); -+} -+EOF -+ # we should really use a build-platform specific compiler -+ # here, but OTOH, the wrappers (shell script and this C one) -+ # are only useful if you want to execute the "real" binary. -+ # Since the "real" binary is built for $host, then this -+ # wrapper might as well be built for $host, too. -+ $opt_dry_run || $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource - ;; -- *) new_libs="$new_libs $deplib" ;; - esac -- done -- compile_deplibs="$new_libs" -- -+ $RM $output -+ trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 - -- compile_command="$compile_command $compile_deplibs" -- finalize_command="$finalize_command $finalize_deplibs" -+ $ECHO > $output "\ -+#! $SHELL - -- if test -n "$rpath$xrpath"; then -- # If the user specified any rpath flags, then add them. -- for libdir in $rpath $xrpath; do -- # This is the magic to use -rpath. -- case "$finalize_rpath " in -- *" $libdir "*) ;; -- *) finalize_rpath="$finalize_rpath $libdir" ;; -- esac -- done -- fi -+# $output - temporary wrapper script for $objdir/$outputname -+# Generated by $PROGRAM (GNU $PACKAGE$TIMESTAMP) $VERSION -+# -+# The $output program cannot be directly executed until all the libtool -+# libraries that it depends on are installed. -+# -+# This wrapper script should never be moved out of the build directory. -+# If it is, it will not operate correctly. - -- # Now hardcode the library paths -- rpath= -- hardcode_libdirs= -- for libdir in $compile_rpath $finalize_rpath; do -- if test -n "$hardcode_libdir_flag_spec"; then -- if test -n "$hardcode_libdir_separator"; then -- if test -z "$hardcode_libdirs"; then -- hardcode_libdirs="$libdir" -- else -- # Just accumulate the unique libdirs. -- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -- ;; -- *) -- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -- ;; -- esac -- fi -- else -- eval flag=\"$hardcode_libdir_flag_spec\" -- rpath="$rpath $flag" -- fi -- elif test -n "$runpath_var"; then -- case "$perm_rpath " in -- *" $libdir "*) ;; -- *) perm_rpath="$perm_rpath $libdir" ;; -- esac -- fi -- case $host in -- *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) -- testbindir=`${ECHO} "$libdir" | ${SED} -e 's*/lib$*/bin*'` -- case :$dllsearchpath: in -- *":$libdir:"*) ;; -- *) dllsearchpath="$dllsearchpath:$libdir";; -- esac -- case :$dllsearchpath: in -- *":$testbindir:"*) ;; -- *) dllsearchpath="$dllsearchpath:$testbindir";; -- esac -- ;; -- esac -- done -- # Substitute the hardcoded libdirs into the rpath. -- if test -n "$hardcode_libdir_separator" && -- test -n "$hardcode_libdirs"; then -- libdir="$hardcode_libdirs" -- eval rpath=\" $hardcode_libdir_flag_spec\" -- fi -- compile_rpath="$rpath" -+# Sed substitution that helps us do robust quoting. It backslashifies -+# metacharacters that are still active within double-quoted strings. -+Xsed='${SED} -e 1s/^X//' -+sed_quote_subst='$sed_quote_subst' - -- rpath= -- hardcode_libdirs= -- for libdir in $finalize_rpath; do -- if test -n "$hardcode_libdir_flag_spec"; then -- if test -n "$hardcode_libdir_separator"; then -- if test -z "$hardcode_libdirs"; then -- hardcode_libdirs="$libdir" -- else -- # Just accumulate the unique libdirs. -- case $hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator in -- *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) -- ;; -- *) -- hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" -- ;; -- esac -- fi -- else -- eval flag=\"$hardcode_libdir_flag_spec\" -- rpath="$rpath $flag" -- fi -- elif test -n "$runpath_var"; then -- case "$finalize_perm_rpath " in -- *" $libdir "*) ;; -- *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; -- esac -- fi -- done -- # Substitute the hardcoded libdirs into the rpath. -- if test -n "$hardcode_libdir_separator" && -- test -n "$hardcode_libdirs"; then -- libdir="$hardcode_libdirs" -- eval rpath=\" $hardcode_libdir_flag_spec\" -- fi -- finalize_rpath="$rpath" -+# The HP-UX ksh and POSIX shell print the target directory to stdout -+# if CDPATH is set. -+(unset CDPATH) >/dev/null 2>&1 && unset CDPATH - -- if test -n "$libobjs" && test "$build_old_libs" = yes; then -- # Transform all the library objects into standard objects. -- compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -- finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` -- fi -+relink_command=\"$relink_command\" - -- func_generate_dlsyms "$outputname" "@PROGRAM@" "no" -+# This environment variable determines our operation mode. -+if test \"\$libtool_install_magic\" = \"$magic\"; then -+ # install mode needs the following variables: -+ generated_by_libtool_version='$macro_version' -+ notinst_deplibs='$notinst_deplibs' -+else -+ # When we are sourced in execute mode, \$file and \$ECHO are already set. -+ if test \"\$libtool_execute_magic\" != \"$magic\"; then -+ ECHO=\"$qecho\" -+ file=\"\$0\" -+ # Make sure echo works. -+ if test \"X\$1\" = X--no-reexec; then -+ # Discard the --no-reexec flag, and continue. -+ shift -+ elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then -+ # Yippee, \$ECHO works! -+ : -+ else -+ # Restart under the correct shell, and then maybe \$ECHO will work. -+ exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} -+ fi -+ fi\ -+" -+ $ECHO >> $output "\ - -- # template prelinking step -- if test -n "$prelink_cmds"; then -- func_execute_cmds "$prelink_cmds" 'exit $?' -- fi -+ # Find the directory that this script lives in. -+ thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` -+ test \"x\$thisdir\" = \"x\$file\" && thisdir=. - -- wrappers_required=yes -- case $host in -- *cygwin* | *mingw* ) -- if test "$build_libtool_libs" != yes; then -- wrappers_required=no -- fi -- ;; -- *) -- if test "$need_relink" = no || test "$build_libtool_libs" != yes; then -- wrappers_required=no -- fi -- ;; -+ # Follow symbolic links until we get to the real thisdir. -+ file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` -+ while test -n \"\$file\"; do -+ destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` -+ -+ # If there was a directory component, then change thisdir. -+ if test \"x\$destdir\" != \"x\$file\"; then -+ case \"\$destdir\" in -+ [\\\\/]* | [A-Za-z]:[\\\\/]*) thisdir=\"\$destdir\" ;; -+ *) thisdir=\"\$thisdir/\$destdir\" ;; - esac -- if test "$wrappers_required" = no; then -- # Replace the output file specification. -- compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` -- link_command="$compile_command$compile_rpath" -+ fi - -- # We have no uninstalled library dependencies, so finalize right now. -- exit_status=0 -- func_show_eval "$link_command" 'exit_status=$?' -+ file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\` -+ file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` -+ done - -- # Delete the generated files. -- if test -f "$output_objdir/${outputname}S.${objext}"; then -- func_show_eval '$RM "$output_objdir/${outputname}S.${objext}"' -- fi -+ # Try to get the absolute directory name. -+ absdir=\`cd \"\$thisdir\" && pwd\` -+ test -n \"\$absdir\" && thisdir=\"\$absdir\" -+" - -- exit $exit_status -- fi -+ if test "$fast_install" = yes; then -+ $ECHO >> $output "\ -+ program=lt-'$outputname'$exeext -+ progdir=\"\$thisdir/$objdir\" - -- if test -n "$compile_shlibpath$finalize_shlibpath"; then -- compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" -- fi -- if test -n "$finalize_shlibpath"; then -- finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" -- fi -+ if test ! -f \"\$progdir/\$program\" || -+ { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ -+ test \"X\$file\" != \"X\$progdir/\$program\"; }; then - -- compile_var= -- finalize_var= -- if test -n "$runpath_var"; then -- if test -n "$perm_rpath"; then -- # We should set the runpath_var. -- rpath= -- for dir in $perm_rpath; do -- rpath="$rpath$dir:" -- done -- compile_var="$runpath_var=\"$rpath\$$runpath_var\" " -- fi -- if test -n "$finalize_perm_rpath"; then -- # We should set the runpath_var. -- rpath= -- for dir in $finalize_perm_rpath; do -- rpath="$rpath$dir:" -- done -- finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " -- fi -- fi -+ file=\"\$\$-\$program\" - -- if test "$no_install" = yes; then -- # We don't need to create a wrapper script. -- link_command="$compile_var$compile_command$compile_rpath" -- # Replace the output file specification. -- link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` -- # Delete the old output file. -- $opt_dry_run || $RM $output -- # Link the executable and exit -- func_show_eval "$link_command" 'exit $?' -- exit $EXIT_SUCCESS -- fi -+ if test ! -d \"\$progdir\"; then -+ $MKDIR \"\$progdir\" -+ else -+ $RM \"\$progdir/\$file\" -+ fi" - -- if test "$hardcode_action" = relink; then -- # Fast installation is not supported -- link_command="$compile_var$compile_command$compile_rpath" -- relink_command="$finalize_var$finalize_command$finalize_rpath" -+ $ECHO >> $output "\ - -- func_warning "this platform does not like uninstalled shared libraries" -- func_warning "\`$output' will be relinked during installation" -+ # relink executable if necessary -+ if test -n \"\$relink_command\"; then -+ if relink_command_output=\`eval \$relink_command 2>&1\`; then : - else -- if test "$fast_install" != no; then -- link_command="$finalize_var$compile_command$finalize_rpath" -- if test "$fast_install" = yes; then -- relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` -- else -- # fast_install is set to needless -- relink_command= -- fi -+ $ECHO \"\$relink_command_output\" >&2 -+ $RM \"\$progdir/\$file\" -+ exit 1 -+ fi -+ fi -+ -+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || -+ { $RM \"\$progdir/\$program\"; -+ $MV \"\$progdir/\$file\" \"\$progdir/\$program\"; } -+ $RM \"\$progdir/\$file\" -+ fi" - else -- link_command="$compile_var$compile_command$compile_rpath" -- relink_command="$finalize_var$finalize_command$finalize_rpath" -+ $ECHO >> $output "\ -+ program='$outputname' -+ progdir=\"\$thisdir/$objdir\" -+" - fi -- fi - -- # Replace the output file specification. -- link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` -+ $ECHO >> $output "\ - -- # Delete the old output files. -- $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname -+ if test -f \"\$progdir/\$program\"; then" - -- func_show_eval "$link_command" 'exit $?' -+ # Export our shlibpath_var if we have one. -+ if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then -+ $ECHO >> $output "\ -+ # Add our own library path to $shlibpath_var -+ $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - -- # Now create the wrapper script. -- func_echo "creating $output" -+ # Some systems cannot cope with colon-terminated $shlibpath_var -+ # The second colon is a workaround for a bug in BeOS R4 sed -+ $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - -- # Quote the relink command for shipping. -- if test -n "$relink_command"; then -- # Preserve any variables that may affect compiler behavior -- for var in $variables_saved_for_relink; do -- if eval test -z \"\${$var+set}\"; then -- relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" -- elif eval var_value=\$$var; test -z "$var_value"; then -- relink_command="$var=; export $var; $relink_command" -- else -- func_quote_for_eval "$var_value" -- relink_command="$var=$func_quote_for_eval_result; export $var; $relink_command" -- fi -- done -- relink_command="(cd `pwd`; $relink_command)" -- relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"` -- fi -+ export $shlibpath_var -+" -+ fi - -- # Quote $ECHO for shipping. -- if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then -- case $progpath in -- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; -- *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; -- esac -- qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"` -- else -- qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"` -- fi -+ # fixup the dll searchpath if we need to. -+ if test -n "$dllsearchpath"; then -+ $ECHO >> $output "\ -+ # Add the dll search path components to the executable PATH -+ PATH=$dllsearchpath:\$PATH -+" -+ fi - -- # Only actually do things if not in dry run mode. -- $opt_dry_run || { -- # win32 will think the script is a binary if it has -- # a .exe suffix, so we strip it off here. -- case $output in -- *.exe) func_stripname '' '.exe' "$output" -- output=$func_stripname_result ;; -- esac -- # test for cygwin because mv fails w/o .exe extensions -- case $host in -- *cygwin*) -- exeext=.exe -- func_stripname '' '.exe' "$outputname" -- outputname=$func_stripname_result ;; -- *) exeext= ;; -- esac -+ $ECHO >> $output "\ -+ if test \"\$libtool_execute_magic\" != \"$magic\"; then -+ # Run the actual program with our arguments. -+" - case $host in -- *cygwin* | *mingw* ) -- output_name=`basename $output` -- output_path=`dirname $output` -- cwrappersource="$output_path/$objdir/lt-$output_name.c" -- cwrapper="$output_path/$output_name.exe" -- $RM $cwrappersource $cwrapper -- trap "$RM $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 -- -- func_emit_libtool_cwrapperexe_source > $cwrappersource -+ # Backslashes separate directories on plain windows -+ *-*-mingw | *-*-os2*) -+ $ECHO >> $output "\ -+ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} -+" -+ ;; - -- # we should really use a build-platform specific compiler -- # here, but OTOH, the wrappers (shell script and this C one) -- # are only useful if you want to execute the "real" binary. -- # Since the "real" binary is built for $host, then this -- # wrapper might as well be built for $host, too. -- $opt_dry_run || $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource -+ *) -+ $ECHO >> $output "\ -+ exec \"\$progdir/\$program\" \${1+\"\$@\"} -+" - ;; - esac -- $RM $output -- trap "$RM $output; exit $EXIT_FAILURE" 1 2 15 -- -- func_emit_libtool_wrapper_script > $output -+ $ECHO >> $output "\ -+ \$ECHO \"\$0: cannot exec \$program \${1+\"\$@\"}\" -+ exit 1 -+ fi -+ else -+ # The program doesn't exist. -+ \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 -+ \$ECHO \"This script is just a wrapper for \$program.\" 1>&2 -+ $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2 -+ exit 1 -+ fi -+fi\ -+" - chmod +x $output - } - exit $EXIT_SUCCESS -@@ -7049,7 +6929,7 @@ EOF - # Preserve any variables that may affect compiler behavior - for var in $variables_saved_for_relink; do - if eval test -z \"\${$var+set}\"; then -- relink_command="{ test -z \"\${$var+set}\" || $lt_unset $var || { $var=; export $var; }; }; $relink_command" -+ relink_command="{ test -z \"\${$var+set}\" || unset $var || { $var=; export $var; }; }; $relink_command" - elif eval var_value=\$$var; test -z "$var_value"; then - relink_command="$var=; export $var; $relink_command" - else -@@ -7205,9 +7085,6 @@ relink_command=\"$relink_command\"" - exit $EXIT_SUCCESS - } - --{ test "$mode" = link || test "$mode" = relink; } && -- func_mode_link ${1+"$@"} -- - - # func_mode_uninstall arg... - func_mode_uninstall () -@@ -7275,7 +7152,7 @@ func_mode_uninstall () - *.la) - # Possibly a libtool archive, so verify it. - if func_lalib_p "$file"; then -- func_source $dir/$name -+ . $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do -@@ -7313,7 +7190,7 @@ func_mode_uninstall () - if func_lalib_p "$file"; then - - # Read the .lo file -- func_source $dir/$name -+ . $dir/$name - - # Add PIC object to the list of files to remove. - if test -n "$pic_object" && -@@ -7346,7 +7223,7 @@ func_mode_uninstall () - # Do a test to see if this is a libtool program. - if func_ltwrapper_p "$file"; then - relink_command= -- func_source $dir/$noexename -+ . $dir/$noexename - - # note $name still contains .exe if it was in $file originally - # as does the version of $file that was added into $rmfiles -@@ -7375,21 +7252,59 @@ func_mode_uninstall () - exit $exit_status - } - --{ test "$mode" = uninstall || test "$mode" = clean; } && -- func_mode_uninstall ${1+"$@"} - --test -z "$mode" && { -- help="$generic_help" -- func_fatal_help "you must specify a MODE" --} -+# TEST SUITE MARKER ## NON-FUNCTION -+## ----------- ## -+## Main. ## -+## ----------- ## - --test -z "$exec_cmd" && \ -- func_fatal_help "invalid operation mode \`$mode'" -+{ -+ # Sanity checks first: -+ func_check_version_match - --if test -n "$exec_cmd"; then -- eval exec "$exec_cmd" -- exit $EXIT_FAILURE --fi -+ if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then -+ func_fatal_configuration "not configured to build any kind of library" -+ fi -+ -+ test -z "$mode" && func_fatal_error "error: you must specify a MODE." -+ -+ -+ # Darwin sucks -+ eval std_shrext=\"$shrext_cmds\" -+ -+ -+ # Only execute mode is allowed to have -dlopen flags. -+ if test -n "$execute_dlfiles" && test "$mode" != execute; then -+ func_error "unrecognized option \`-dlopen'" -+ $ECHO "$help" 1>&2 -+ exit $EXIT_FAILURE -+ fi -+ -+ # Change the help message to a mode-specific one. -+ generic_help="$help" -+ help="Try \`$progname --help --mode=$mode' for more information." -+ -+ case $mode in -+ compile) func_mode_compile ${1+"$@"} ;; -+ execute) func_mode_execute ${1+"$@"} ;; -+ finish) func_mode_finish ${1+"$@"} ;; -+ install) func_mode_install ${1+"$@"} ;; -+ link|relink) func_mode_link ${1+"$@"} ;; -+ uninstall|clean) func_mode_uninstall ${1+"$@"} ;; -+ -+ "") help="$generic_help" -+ func_fatal_help "you must specify a MODE" -+ ;; -+ esac -+ -+ test -z "$exec_cmd" && \ -+ func_fatal_help "invalid operation mode \`$mode'" -+ -+ if test -n "$exec_cmd"; then -+ eval exec "$exec_cmd" -+ exit $EXIT_FAILURE -+ fi -+} - - exit $exit_status - -@@ -7418,6 +7333,3 @@ build_old_libs=`case $build_libtool_libs - # mode:shell-script - # sh-indentation:2 - # End: --# vi:sw=2 -- -- -- 2.30.2