From ed507d618df8f876d138bb77c51d5ebcc86a9f82 Mon Sep 17 00:00:00 2001 From: "William D. Jones" Date: Mon, 3 Sep 2018 19:48:19 -0400 Subject: [PATCH] Add lm32 "lite" variant, remove mult/div from "minimal" and update compiler flags accordingly. --- litex/soc/cores/cpu/lm32/core.py | 4 +- .../lm32/verilog/config_lite/lm32_config.v | 199 ++++++++++++++++++ .../lm32/verilog/config_minimal/lm32_config.v | 4 +- litex/soc/integration/builder.py | 3 +- litex/soc/integration/cpu_interface.py | 7 +- litex/soc/software/libcompiler_rt/Makefile | 2 +- 6 files changed, 212 insertions(+), 7 deletions(-) create mode 100644 litex/soc/cores/cpu/lm32/verilog/config_lite/lm32_config.v diff --git a/litex/soc/cores/cpu/lm32/core.py b/litex/soc/cores/cpu/lm32/core.py index 80500b86..f68be81a 100644 --- a/litex/soc/cores/cpu/lm32/core.py +++ b/litex/soc/cores/cpu/lm32/core.py @@ -7,7 +7,7 @@ from litex.soc.interconnect import wishbone class LM32(Module): def __init__(self, platform, eba_reset, variant=None): - assert variant in (None, "minimal"), "Unsupported variant %s" % variant + assert variant in (None, "lite", "minimal"), "Unsupported variant %s" % variant self.reset = Signal() self.ibus = i = wishbone.Interface() self.dbus = d = wishbone.Interface() @@ -84,5 +84,7 @@ class LM32(Module): "lm32_dtlb.v") if variant == "minimal": platform.add_verilog_include_path(os.path.join(vdir, "config_minimal")) + elif variant == "lite": + platform.add_verilog_include_path(os.path.join(vdir, "config_lite")) else: platform.add_verilog_include_path(os.path.join(vdir, "config")) diff --git a/litex/soc/cores/cpu/lm32/verilog/config_lite/lm32_config.v b/litex/soc/cores/cpu/lm32/verilog/config_lite/lm32_config.v new file mode 100644 index 00000000..92468adc --- /dev/null +++ b/litex/soc/cores/cpu/lm32/verilog/config_lite/lm32_config.v @@ -0,0 +1,199 @@ +`ifdef LM32_CONFIG_V +`else +`define LM32_CONFIG_V + +// +// EXCEPTION VECTORS BASE ADDRESS +// + +// Base address for exception vectors +`define CFG_EBA_RESET 32'h00000000 + +// Base address for the debug exception vectors. If the DC_RE flag is +// set or the at_debug signal is asserted (see CFG_ALTERNATE_EBA) this +// will also be used for normal exception vectors. +`define CFG_DEBA_RESET 32'h10000000 + +// Enable exception vector remapping by external signal +//`define CFG_ALTERNATE_EBA + + +// +// ALU OPTIONS +// + +// Enable sign-extension instructions +`define CFG_SIGN_EXTEND_ENABLED + +// Shifter +// You may either enable the piplined or the multi-cycle barrel +// shifter. The multi-cycle shifter will stall the pipeline until +// the result is available after 32 cycles. +// If both options are disabled, only "right shift by one bit" is +// available. +`define CFG_MC_BARREL_SHIFT_ENABLED +//`define CFG_PL_BARREL_SHIFT_ENABLED + +// Multiplier +// The multiplier is available either in a multi-cycle version or +// in a pipelined one. The multi-cycle multiplier stalls the pipe +// for 32 cycles. If both options are disabled, multiply operations +// are not supported. +`define CFG_MC_MULTIPLY_ENABLED +//`define CFG_PL_MULTIPLY_ENABLED + +// Enable the multi-cycle divider. Stalls the pipe until the result +// is ready after 32 cycles. If disabled, the divide operation is not +// supported. +`define CFG_MC_DIVIDE_ENABLED + + +// +// INTERRUPTS +// + +// Enable support for 32 hardware interrupts +`define CFG_INTERRUPTS_ENABLED + +// Enable level-sensitive interrupts. The interrupt line status is +// reflected in the IP register, which is then read-only. +`define CFG_LEVEL_SENSITIVE_INTERRUPTS + + +// +// USER INSTRUCTION +// + +// Enable support for the user opcode. +//`define CFG_USER_ENABLED + + +// +// MEMORY MANAGEMENT UNIT +// + +// Enable instruction and data translation lookaside buffers and +// restricted user mode. +//`define CFG_MMU_ENABLED + + +// +// CACHE +// + +// Instruction cache +`define CFG_ICACHE_ENABLED +`define CFG_ICACHE_ASSOCIATIVITY 1 +`define CFG_ICACHE_SETS 128 +`define CFG_ICACHE_BYTES_PER_LINE 16 +`define CFG_ICACHE_BASE_ADDRESS 32'h00000000 +`define CFG_ICACHE_LIMIT 32'h7fffffff + +// Data cache +//`define CFG_DCACHE_ENABLED +`define CFG_DCACHE_ASSOCIATIVITY 1 +`define CFG_DCACHE_SETS 256 +`define CFG_DCACHE_BYTES_PER_LINE 16 +`define CFG_DCACHE_BASE_ADDRESS 32'h00000000 +`define CFG_DCACHE_LIMIT 32'h7fffffff + + +// +// DEBUG OPTION +// + +// Globally enable debugging +//`define CFG_DEBUG_ENABLED + +// Enable the hardware JTAG debugging interface. +// Note: to use this, there must be a special JTAG module for your +// device. At the moment, there is only support for the +// Spartan-6. +//`define CFG_JTAG_ENABLED + +// JTAG UART is a communication channel which uses JTAG to transmit +// and receive bytes to and from the host computer. +//`define CFG_JTAG_UART_ENABLED + +// Enable reading and writing to the memory and writing CSRs using +// the JTAG interface. +//`define CFG_HW_DEBUG_ENABLED + +// Number of hardware watchpoints, max. 4 +//`define CFG_WATCHPOINTS 32'h4 + +// Enable hardware breakpoints +//`define CFG_ROM_DEBUG_ENABLED + +// Number of hardware breakpoints, max. 4 +//`define CFG_BREAKPOINTS 32'h4 + +// Put the processor into debug mode by an external signal. That is, +// raise a breakpoint exception. This is useful if you have a debug +// monitor and a serial line and you want to trap into the monitor on a +// BREAK symbol on the serial line. +//`define CFG_EXTERNAL_BREAK_ENABLED + + +// +// REGISTER FILE +// + +// The following option explicitly infers block RAM for the register +// file. There is extra logic to avoid parallel writes and reads. +// Normally, if your synthesizer is smart enough, this should not be +// necessary because it will automatically infer block RAM for you. +//`define CFG_EBR_POSEDGE_REGISTER_FILE + +// Explicitly infers block RAM, too. But it uses two different clocks, +// one being shifted by 180deg, for the read and write port. Therefore, +// no additional logic to avoid the parallel write/reads. +//`define CFG_EBR_NEGEDGE_REGISTER_FILE + + +// +// MISCELLANEOUS +// + +// Exceptions on wishbone bus errors +//`define CFG_BUS_ERRORS_ENABLED + +// Enable the cycle counter +`define CFG_CYCLE_COUNTER_ENABLED + +// Embedded instruction ROM using on-chip block RAM +//`define CFG_IROM_ENABLED +//`define CFG_IROM_INIT_FILE "NONE" +//`define CFG_IROM_BASE_ADDRESS 32'h10000000 +//`define CFG_IROM_LIMIT 32'h10000fff + +// Embedded data RAM using on-chip block RAM +//`define CFG_DRAM_ENABLED +//`define CFG_DRAM_INIT_FILE "NONE" +//`define CFG_DRAM_BASE_ADDRESS 32'h20000000 +//`define CFG_DRAM_LIMIT 32'h20000fff + +// Trace unit +//`define CFG_TRACE_ENABLED + +// Resolve unconditional branches already in the X stage (UNTESTED!) +//`define CFG_FAST_UNCONDITIONAL_BRANCH + +// log2 function +// If your simulator/synthesizer does not support the $clog2 system +// function you can use a constant function instead. + +function integer clog2; + input integer value; + begin + value = value - 1; + for (clog2 = 0; value > 0; clog2 = clog2 + 1) + value = value >> 1; + end +endfunction + +`define CLOG2 clog2 + +//`define CLOG2 $clog2 + +`endif diff --git a/litex/soc/cores/cpu/lm32/verilog/config_minimal/lm32_config.v b/litex/soc/cores/cpu/lm32/verilog/config_minimal/lm32_config.v index b9620d6c..83d9d97f 100644 --- a/litex/soc/cores/cpu/lm32/verilog/config_minimal/lm32_config.v +++ b/litex/soc/cores/cpu/lm32/verilog/config_minimal/lm32_config.v @@ -39,13 +39,13 @@ // in a pipelined one. The multi-cycle multiplier stalls the pipe // for 32 cycles. If both options are disabled, multiply operations // are not supported. -`define CFG_MC_MULTIPLY_ENABLED +//`define CFG_MC_MULTIPLY_ENABLED //`define CFG_PL_MULTIPLY_ENABLED // Enable the multi-cycle divider. Stalls the pipe until the result // is ready after 32 cycles. If disabled, the divide operation is not // supported. -`define CFG_MC_DIVIDE_ENABLED +//`define CFG_MC_DIVIDE_ENABLED // diff --git a/litex/soc/integration/builder.py b/litex/soc/integration/builder.py index a5564470..45bfd4ae 100644 --- a/litex/soc/integration/builder.py +++ b/litex/soc/integration/builder.py @@ -56,6 +56,7 @@ class Builder: def _generate_includes(self): cpu_type = self.soc.cpu_type + cpu_variant = self.soc.cpu_variant memory_regions = self.soc.get_memory_regions() flash_boot_address = getattr(self.soc, "flash_boot_address", None) csr_regions = self.soc.get_csr_regions() @@ -68,7 +69,7 @@ class Builder: variables_contents = [] def define(k, v): variables_contents.append("{}={}\n".format(k, _makefile_escape(v))) - for k, v in cpu_interface.get_cpu_mak(cpu_type): + for k, v in cpu_interface.get_cpu_mak(cpu_type, cpu_variant): define(k, v) define("SOC_DIRECTORY", soc_directory) variables_contents.append("export BUILDINC_DIRECTORY\n") diff --git a/litex/soc/integration/cpu_interface.py b/litex/soc/integration/cpu_interface.py index bc934cf3..e75b2847 100644 --- a/litex/soc/integration/cpu_interface.py +++ b/litex/soc/integration/cpu_interface.py @@ -13,7 +13,7 @@ cpu_endianness = { "vexriscv": "little" } -def get_cpu_mak(cpu): +def get_cpu_mak(cpu, variant): clang = os.getenv("CLANG", "") if clang != "": clang = bool(int(clang)) @@ -23,7 +23,10 @@ def get_cpu_mak(cpu): if cpu == "lm32": assert not clang, "lm32 not supported with clang." triple = "lm32-elf" - cpuflags = "-mbarrel-shift-enabled -mmultiply-enabled -mdivide-enabled -msign-extend-enabled" + if variant == "minimal": + cpuflags = "-mbarrel-shift-enabled -msign-extend-enabled" + else: + cpuflags = "-mbarrel-shift-enabled -mmultiply-enabled -mdivide-enabled -msign-extend-enabled" clang = False elif cpu == "or1k": # Default to CLANG unless told otherwise diff --git a/litex/soc/software/libcompiler_rt/Makefile b/litex/soc/software/libcompiler_rt/Makefile index 58d83e30..929616b3 100644 --- a/litex/soc/software/libcompiler_rt/Makefile +++ b/litex/soc/software/libcompiler_rt/Makefile @@ -15,7 +15,7 @@ all: libcompiler_rt.a libcompiler_rt.a: $(OBJECTS) $(CC) -c $(CFLAGS) $(1) $(SOC_DIRECTORY)/software/libcompiler_rt/mulsi3.c -o mulsi3.o - $(AR) crs libcompiler_rt.a $(OBJECTS) + $(AR) crs libcompiler_rt.a $(OBJECTS) mulsi3.o # pull in dependency info for *existing* .o files -include $(OBJECTS:.o=.d) -- 2.30.2