From ee7d8fdcb2226139fd1d6a6f0cde987721ea3699 Mon Sep 17 00:00:00 2001 From: Nikos Nikoleris Date: Fri, 12 Aug 2016 14:11:45 +0100 Subject: [PATCH] mem: Add support for secure packets in the snoop filter Secure and non-secure data can coexist in the cache and therefore the snoop filter should treat differently packets with secure and non secure accesses. This patch uses the lower bits of the line address to keep track of whether the packet is addressing secure memory or not. Change-Id: I54a5e614dad566a5083582bede86c86896f2c2c1 Reviewed-by: Andreas Sandberg Reviewed-by: Stephan Diestelhorst Reviewed-by: Tony Gutierrez --- src/mem/coherent_xbar.cc | 6 +++--- src/mem/snoop_filter.cc | 23 +++++++++++++++++++++-- src/mem/snoop_filter.hh | 12 ++++++++++-- 3 files changed, 34 insertions(+), 7 deletions(-) diff --git a/src/mem/coherent_xbar.cc b/src/mem/coherent_xbar.cc index c0d8ab037..3e917dacc 100644 --- a/src/mem/coherent_xbar.cc +++ b/src/mem/coherent_xbar.cc @@ -1,5 +1,5 @@ /* - * Copyright (c) 2011-2015 ARM Limited + * Copyright (c) 2011-2016 ARM Limited * All rights reserved * * The license below extends only to copyright in the software and shall @@ -266,7 +266,7 @@ CoherentXBar::recvTimingReq(PacketPtr pkt, PortID slave_port_id) if (snoopFilter && !system->bypassCaches()) { // Let the snoop filter know about the success of the send operation - snoopFilter->finishRequest(!success, addr); + snoopFilter->finishRequest(!success, addr, pkt->isSecure()); } // check if we were successful in sending the packet onwards @@ -666,7 +666,7 @@ CoherentXBar::recvAtomic(PacketPtr pkt, PortID slave_port_id) // operation, and do it even before sending it onwards to // avoid situations where atomic upward snoops sneak in // between and change the filter state - snoopFilter->finishRequest(false, pkt->getAddr()); + snoopFilter->finishRequest(false, pkt->getAddr(), pkt->isSecure()); snoop_result = forwardAtomic(pkt, slave_port_id, InvalidPortID, sf_res.first); diff --git a/src/mem/snoop_filter.cc b/src/mem/snoop_filter.cc index 14cdc7e07..ec96f6e8c 100755 --- a/src/mem/snoop_filter.cc +++ b/src/mem/snoop_filter.cc @@ -69,6 +69,9 @@ SnoopFilter::lookupRequest(const Packet* cpkt, const SlavePort& slave_port) bool allocate = !cpkt->req->isUncacheable() && slave_port.isSnooping() && cpkt->fromCache(); Addr line_addr = cpkt->getBlockAddr(linesize); + if (cpkt->isSecure()) { + line_addr |= LineSecure; + } SnoopMask req_port = portToMask(slave_port); reqLookupResult = cachedLocations.find(line_addr); bool is_hit = (reqLookupResult != cachedLocations.end()); @@ -146,12 +149,16 @@ SnoopFilter::lookupRequest(const Packet* cpkt, const SlavePort& slave_port) } void -SnoopFilter::finishRequest(bool will_retry, const Addr addr) +SnoopFilter::finishRequest(bool will_retry, Addr addr, bool is_secure) { if (reqLookupResult != cachedLocations.end()) { // since we rely on the caller, do a basic check to ensure // that finishRequest is being called following lookupRequest - assert(reqLookupResult->first == (addr & ~(Addr(linesize - 1)))); + Addr line_addr = (addr & ~(Addr(linesize - 1))); + if (is_secure) { + line_addr |= LineSecure; + } + assert(reqLookupResult->first == line_addr); if (will_retry) { // Undo any changes made in lookupRequest to the snoop filter // entry if the request will come again. retryItem holds @@ -175,6 +182,9 @@ SnoopFilter::lookupSnoop(const Packet* cpkt) assert(cpkt->isRequest()); Addr line_addr = cpkt->getBlockAddr(linesize); + if (cpkt->isSecure()) { + line_addr |= LineSecure; + } auto sf_it = cachedLocations.find(line_addr); bool is_hit = (sf_it != cachedLocations.end()); @@ -243,6 +253,9 @@ SnoopFilter::updateSnoopResponse(const Packet* cpkt, } Addr line_addr = cpkt->getBlockAddr(linesize); + if (cpkt->isSecure()) { + line_addr |= LineSecure; + } SnoopMask rsp_mask = portToMask(rsp_port); SnoopMask req_mask = portToMask(req_port); SnoopItem& sf_item = cachedLocations[line_addr]; @@ -289,6 +302,9 @@ SnoopFilter::updateSnoopForward(const Packet* cpkt, assert(cpkt->cacheResponding()); Addr line_addr = cpkt->getBlockAddr(linesize); + if (cpkt->isSecure()) { + line_addr |= LineSecure; + } auto sf_it = cachedLocations.find(line_addr); bool is_hit = sf_it != cachedLocations.end(); @@ -328,6 +344,9 @@ SnoopFilter::updateResponse(const Packet* cpkt, const SlavePort& slave_port) // next check if we actually allocated an entry Addr line_addr = cpkt->getBlockAddr(linesize); + if (cpkt->isSecure()) { + line_addr |= LineSecure; + } auto sf_it = cachedLocations.find(line_addr); if (sf_it == cachedLocations.end()) return; diff --git a/src/mem/snoop_filter.hh b/src/mem/snoop_filter.hh index 3851e5810..85cc75e9b 100755 --- a/src/mem/snoop_filter.hh +++ b/src/mem/snoop_filter.hh @@ -1,5 +1,5 @@ /* - * Copyright (c) 2013-2015 ARM Limited + * Copyright (c) 2013-2016 ARM Limited * All rights reserved * * The license below extends only to copyright in the software and shall @@ -143,7 +143,7 @@ class SnoopFilter : public SimObject { * @param will_retry This request will retry on this bus / snoop filter * @param addr Packet address, merely for sanity checking */ - void finishRequest(bool will_retry, const Addr addr); + void finishRequest(bool will_retry, Addr addr, bool is_secure); /** * Handle an incoming snoop from below (the master port). These @@ -282,6 +282,14 @@ class SnoopFilter : public SimObject { /** Max capacity in terms of cache blocks tracked, for sanity checking */ const unsigned maxEntryCount; + /** + * Use the lower bits of the address to keep track of the line status + */ + enum LineStatus { + /** block holds data from the secure memory space */ + LineSecure = 0x01, + }; + /** Statistics */ Stats::Scalar totRequests; Stats::Scalar hitSingleRequests; -- 2.30.2