From f1251bdd6bd703ced6830769d610bbaa1bd56b6b Mon Sep 17 00:00:00 2001 From: "J.T. Conklin" Date: Wed, 29 Mar 2000 04:16:57 +0000 Subject: [PATCH] 2000-03-28 J.T. Conklin * gdb.texinfo: Clarify which remote debug protocol commands are required and which are optional. --- gdb/doc/ChangeLog | 5 +++++ gdb/doc/gdb.texinfo | 42 +++++++++++++++++++++++------------------- 2 files changed, 28 insertions(+), 19 deletions(-) diff --git a/gdb/doc/ChangeLog b/gdb/doc/ChangeLog index 72dcb4f6670..03a704be806 100644 --- a/gdb/doc/ChangeLog +++ b/gdb/doc/ChangeLog @@ -1,3 +1,8 @@ +2000-03-28 J.T. Conklin + + * gdb.texinfo: Clarify which remote debug protocol commands are + required and which are optional. + Tue Mar 28 16:06:22 2000 Andrew Cagney * gdb.texinfo: Revert remainder of Fri Mar 24 18:06:34 2000 Andrew diff --git a/gdb/doc/gdb.texinfo b/gdb/doc/gdb.texinfo index 82482d0fad9..6aca7ad4065 100644 --- a/gdb/doc/gdb.texinfo +++ b/gdb/doc/gdb.texinfo @@ -8938,6 +8938,10 @@ For any @var{command} not supported by the stub, an empty response protocol. A newer @value{GDBN} can tell if a packet is supported based on that response. +A stub is required to support the @samp{g}, @samp{G}, @samp{m}, @samp{M}, +@samp{c}, and @samp{s} @var{command}s. All other @var{command}s are +optional. + Below is a complete list of all currently defined @var{command}s and their corresponding response @var{data}: @@ -8946,7 +8950,7 @@ their corresponding response @var{data}: @tab Request @tab Description -@item extended ops @emph{(optional)} +@item extended ops @tab @code{!} @tab Use the extended remote protocol. Sticky---only needs to be set once. @@ -8972,7 +8976,7 @@ and continue. @tab @code{a} @tab Reserved for future use -@item set program arguments @strong{(reserved)} @emph{(optional)} +@item set program arguments @strong{(reserved)} @tab @code{A}@var{arglen}@code{,}@var{argnum}@code{,}@var{arg}@code{,...} @tab Initialized @samp{argv[]} array passed into program. @var{arglen} @@ -9012,7 +9016,7 @@ current address. @tab reply @tab see below -@item continue with signal @emph{(optional)} +@item continue with signal @tab @code{C}@var{sig}@code{;}@var{addr} @tab Continue with signal @var{sig} (hex signal number). If @@ -9026,7 +9030,7 @@ Continue with signal @var{sig} (hex signal number). If @tab toggle debug flag. -@item detach @emph{(optional)} +@item detach @tab @code{D} @tab Detach @value{GDBN} from the remote system. Sent to the remote target before @@ -9083,7 +9087,7 @@ See @samp{g} for a description of the @var{XX...} data. @tab @code{h} @tab Reserved for future use -@item set thread @emph{(optional)} +@item set thread @tab @code{H}@var{c}@var{t...} @tab Set thread for subsequent operations (@samp{m}, @samp{M}, @samp{g}, @@ -9112,14 +9116,14 @@ thread used in other operations. If zero, pick a thread, any thread. @c selected, sets the registers of the register block of @c that thread; otherwise sets current registers. -@item cycle step @strong{(draft)} @emph{(optional)} +@item cycle step @strong{(draft)} @tab @code{i}@var{addr}@code{,}@var{nnn} @tab Step the remote target by a single clock cycle. If @code{,}@var{nnn} is present, cycle step @var{nnn} cycles. If @var{addr} is present, cycle step starting at that address. -@item signal then cycle step @strong{(reserved)} @emph{(optional)} +@item signal then cycle step @strong{(reserved)} @tab @code{I} @tab See @samp{i} and @samp{S} for likely syntax and semantics. @@ -9132,7 +9136,7 @@ See @samp{i} and @samp{S} for likely syntax and semantics. @tab @code{J} @tab Reserved for future use -@item kill request @emph{(optional)} +@item kill request @tab @code{k} @tab FIXME: @emph{There is no description of how operate when a specific @@ -9202,7 +9206,7 @@ See write register. @tab return @var{r....} @tab The hex encoded value of the register in target byte order. -@item write reg @emph{(optional)} +@item write reg @tab @code{P}@var{n...}@code{=}@var{r...} @tab Write register @var{n...} with value @var{r...}, which contains two hex @@ -9214,7 +9218,7 @@ digits for each byte in the register (target byte order). @tab reply @code{E}@var{NN} @tab for an error -@item general query @emph{(optional)} +@item general query @tab @code{q}@var{query} @tab Request info about @var{query}. In general @value{GDBN} @var{query}'s @@ -9232,7 +9236,7 @@ must ensure that they match the full @var{query} name. @tab reply @samp{} @tab Indicating an unrecognized @var{query}. -@item general set @emph{(optional)} +@item general set @tab @code{Q}@var{var}@code{=}@var{val} @tab Set value of @var{var} to @var{val}. See @samp{q} for a discussing of @@ -9243,14 +9247,14 @@ naming conventions. @tab Reset the entire system. -@item remote restart @emph{(optional)} +@item remote restart @tab @code{R}@var{XX} @tab Restart the remote server. @var{XX} while needed has no clear definition. FIXME: @emph{An example interaction explaining how this packet is used in extended-remote mode is needed}. -@item step @emph{(optional)} +@item step @tab @code{s}@var{addr} @tab @var{addr} is address to resume. If @var{addr} is omitted, resume at @@ -9259,7 +9263,7 @@ same address. @tab reply @tab see below -@item step with signal @emph{(optional)} +@item step with signal @tab @code{S}@var{sig}@code{;}@var{addr} @tab Like @samp{C} but step not continue. @@ -9267,14 +9271,14 @@ Like @samp{C} but step not continue. @tab reply @tab see below -@item search @emph{(optional)} +@item search @tab @code{t}@var{addr}@code{:}@var{PP}@code{,}@var{MM} @tab Search backwards starting at address @var{addr} for a match with pattern @var{PP} and mask @var{MM}. @var{PP} and @var{MM} are 4 bytes. @var{addr} must be at least 3 digits. -@item thread alive @emph{(optional)} +@item thread alive @tab @code{T}@var{XX} @tab Find out if the thread XX is alive. @item @@ -9312,7 +9316,7 @@ bytes. @var{addr} must be at least 3 digits. @tab @code{x} @tab Reserved for future use -@item write mem (binary) @emph{(optional)} +@item write mem (binary) @tab @code{X}@var{addr}@code{,}@var{length}@var{:}@var{XX...} @tab @var{addr} is address, @var{length} is number of bytes, @var{XX...} is @@ -9333,12 +9337,12 @@ escaped using @code{0x7d}. @tab @code{Y} @tab Reserved for future use -@item remove break or watchpoint @strong{(draft)} @emph{(optional)} +@item remove break or watchpoint @strong{(draft)} @tab @code{z}@var{t}@code{,}@var{addr}@code{,}@var{length} @tab See @samp{Z}. -@item insert break or watchpoint @strong{(draft)} @emph{(optional)} +@item insert break or watchpoint @strong{(draft)} @tab @code{Z}@var{t}@code{,}@var{addr}@code{,}@var{length} @tab @var{t} is type: @samp{0} - software breakpoint, @samp{1} - hardware -- 2.30.2