From f3d770869cf88d003628a609062d4d43d65ed665 Mon Sep 17 00:00:00 2001 From: Daniel Jacobowitz Date: Sat, 16 Dec 2006 19:18:37 +0000 Subject: [PATCH] * dve3900-rom.c: Delete file. * Makefile.in (dve3900-rom.o): Delete. --- gdb/ChangeLog | 5 + gdb/Makefile.in | 3 - gdb/dve3900-rom.c | 1069 --------------------------------------------- 3 files changed, 5 insertions(+), 1072 deletions(-) delete mode 100644 gdb/dve3900-rom.c diff --git a/gdb/ChangeLog b/gdb/ChangeLog index f6083026c95..dc39ab41c39 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,8 @@ +2006-12-16 Daniel Jacobowitz + + * dve3900-rom.c: Delete file. + * Makefile.in (dve3900-rom.o): Delete. + 2006-12-16 Daniel Jacobowitz * vx-share/README: Delete file. diff --git a/gdb/Makefile.in b/gdb/Makefile.in index 35550cd9d37..29c6ee4f9a7 100644 --- a/gdb/Makefile.in +++ b/gdb/Makefile.in @@ -1945,9 +1945,6 @@ dsrec.o: dsrec.c $(defs_h) $(serial_h) $(srec_h) $(gdb_assert_h) \ dummy-frame.o: dummy-frame.c $(defs_h) $(dummy_frame_h) $(regcache_h) \ $(frame_h) $(inferior_h) $(gdb_assert_h) $(frame_unwind_h) \ $(command_h) $(gdbcmd_h) $(gdb_string_h) -dve3900-rom.o: dve3900-rom.c $(defs_h) $(gdbcore_h) $(target_h) $(monitor_h) \ - $(serial_h) $(inferior_h) $(command_h) $(gdb_string_h) $(regcache_h) \ - $(mips_tdep_h) dwarf2expr.o: dwarf2expr.c $(defs_h) $(symtab_h) $(gdbtypes_h) $(value_h) \ $(gdbcore_h) $(elf_dwarf2_h) $(dwarf2expr_h) dwarf2-frame.o: dwarf2-frame.c $(defs_h) $(dwarf2expr_h) $(elf_dwarf2_h) \ diff --git a/gdb/dve3900-rom.c b/gdb/dve3900-rom.c deleted file mode 100644 index 4a9001c10c7..00000000000 --- a/gdb/dve3900-rom.c +++ /dev/null @@ -1,1069 +0,0 @@ -/* Remote debugging interface for Densan DVE-R3900 ROM monitor for - GDB, the GNU debugger. - Copyright (C) 1997, 1998, 2000, 2001 Free Software Foundation, Inc. - - This file is part of GDB. - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, - Boston, MA 02110-1301, USA. */ - -#include "defs.h" -#include "gdbcore.h" -#include "target.h" -#include "monitor.h" -#include "serial.h" -#include "inferior.h" -#include "command.h" -#include "gdb_string.h" -#include -#include "regcache.h" -#include "mips-tdep.h" - -/* Type of function passed to bfd_map_over_sections. */ - -typedef void (*section_map_func) (bfd * abfd, asection * sect, void *obj); - -/* Packet escape character used by Densan monitor. */ - -#define PESC 0xdc - -/* Maximum packet size. This is actually smaller than necessary - just to be safe. */ - -#define MAXPSIZE 1024 - -/* External functions. */ - -extern void report_transfer_performance (unsigned long, time_t, time_t); - -/* Certain registers are "bitmapped", in that the monitor can only display - them or let the user modify them as a series of named bitfields. - This structure describes a field in a bitmapped register. */ - -struct bit_field - { - char *prefix; /* string appearing before the value */ - char *suffix; /* string appearing after the value */ - char *user_name; /* name used by human when entering field value */ - int length; /* number of bits in the field */ - int start; /* starting (least significant) bit number of field */ - }; - -/* Local functions for register manipulation. */ - -static void r3900_supply_register (char *regname, int regnamelen, - char *val, int vallen); -static void fetch_bad_vaddr (void); -static unsigned long fetch_fields (struct bit_field *bf); -static void fetch_bitmapped_register (int regno, struct bit_field *bf); -static void r3900_fetch_registers (int regno); -static void store_bitmapped_register (int regno, struct bit_field *bf); -static void r3900_store_registers (int regno); - -/* Local functions for fast binary loading. */ - -static void write_long (char *buf, long n); -static void write_long_le (char *buf, long n); -static int debug_readchar (int hex); -static void debug_write (unsigned char *buf, int buflen); -static void ignore_packet (void); -static void send_packet (char type, unsigned char *buf, int buflen, int seq); -static void process_read_request (unsigned char *buf, int buflen); -static void count_section (bfd * abfd, asection * s, - unsigned int *section_count); -static void load_section (bfd * abfd, asection * s, unsigned int *data_count); -static void r3900_load (char *filename, int from_tty); - -/* Miscellaneous local functions. */ - -static void r3900_open (char *args, int from_tty); - - -/* Pointers to static functions in monitor.c for fetching and storing - registers. We can't use these function in certain cases where the Densan - monitor acts perversely: for registers that it displays in bit-map - format, and those that can't be modified at all. In those cases - we have to use our own functions to fetch and store their values. */ - -static void (*orig_monitor_fetch_registers) (int regno); -static void (*orig_monitor_store_registers) (int regno); - -/* Pointer to static function in monitor. for loading programs. - We use this function for loading S-records via the serial link. */ - -static void (*orig_monitor_load) (char *file, int from_tty); - -/* This flag is set if a fast ethernet download should be used. */ - -static int ethernet = 0; - -/* This array of registers needs to match the indexes used by GDB. The - whole reason this exists is because the various ROM monitors use - different names than GDB does, and don't support all the registers - either. */ - -static char *r3900_regnames[] = -{ - "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", - "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", - "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", - "r24", "r25", "r26", "r27", "r28", "r29", "r30", "r31", - - "S", /* PS_REGNUM */ - "l", /* MIPS_EMBED_LO_REGNUM */ - "h", /* MIPS_EMBED_HI_REGNUM */ - "B", /* MIPS_EMBED_BADVADDR_REGNUM */ - "Pcause", /* MIPS_EMBED_CAUSE_REGNUM */ - "p" /* MIPS_EMBED_PC_REGNUM */ -}; - - -/* Table of register names produced by monitor's register dump command. */ - -static struct reg_entry - { - char *name; - int regno; - } -reg_table[] = -{ - { - "r0_zero", 0 - } - , - { - "r1_at", 1 - } - , - { - "r2_v0", 2 - } - , - { - "r3_v1", 3 - } - , - { - "r4_a0", 4 - } - , - { - "r5_a1", 5 - } - , - { - "r6_a2", 6 - } - , - { - "r7_a3", 7 - } - , - { - "r8_t0", 8 - } - , - { - "r9_t1", 9 - } - , - { - "r10_t2", 10 - } - , - { - "r11_t3", 11 - } - , - { - "r12_t4", 12 - } - , - { - "r13_t5", 13 - } - , - { - "r14_t6", 14 - } - , - { - "r15_t7", 15 - } - , - { - "r16_s0", 16 - } - , - { - "r17_s1", 17 - } - , - { - "r18_s2", 18 - } - , - { - "r19_s3", 19 - } - , - { - "r20_s4", 20 - } - , - { - "r21_s5", 21 - } - , - { - "r22_s6", 22 - } - , - { - "r23_s7", 23 - } - , - { - "r24_t8", 24 - } - , - { - "r25_t9", 25 - } - , - { - "r26_k0", 26 - } - , - { - "r27_k1", 27 - } - , - { - "r28_gp", 28 - } - , - { - "r29_sp", 29 - } - , - { - "r30_fp", 30 - } - , - { - "r31_ra", 31 - } - , - { - "HI", MIPS_EMBED_HI_REGNUM - } - , - { - "LO", MIPS_EMBED_LO_REGNUM - } - , - { - "PC", MIPS_EMBED_PC_REGNUM - } - , - { - "BadV", MIPS_EMBED_BADVADDR_REGNUM - } - , - { - NULL, 0 - } -}; - - -/* The monitor displays the cache register along with the status register, - as if they were a single register. So when we want to fetch the - status register, parse but otherwise ignore the fields of the - cache register that the monitor displays. Register fields that should - be ignored have a length of zero in the tables below. */ - -static struct bit_field status_fields[] = -{ - /* Status register portion */ - {"SR[]", "sw", 2, 8}, - {"[]", "iec", 1, 0}, - - /* Cache register portion (dummy for parsing only) */ - {"CR[] ", "dalc", 0, 8}, - - {NULL, NULL, 0, 0} /* end of table marker */ -}; - - -#if 0 /* FIXME: Enable when we add support for modifying cache register. */ -static struct bit_field cache_fields[] = -{ - /* Status register portion (dummy for parsing only) */ - {"SR[]", "sw", 0, 8}, - {"[]", "iec", 0, 0}, - - /* Cache register portion */ - {"CR[] ", "dalc", 1, 8}, - - {NULL, NULL, NULL, 0, 0} /* end of table marker */ -}; -#endif - - -static struct bit_field cause_fields[] = -{ - {"]", "ec", 5, 2}, - - {NULL, NULL, NULL, 0, 0} /* end of table marker */ -}; - - -/* The monitor prints register values in the form - - regname = xxxx xxxx - - We look up the register name in a table, and remove the embedded space in - the hex value before passing it to monitor_supply_register. */ - -static void -r3900_supply_register (char *regname, int regnamelen, char *val, int vallen) -{ - int regno = -1; - int i; - char valbuf[10]; - char *p; - - /* Perform some sanity checks on the register name and value. */ - if (regnamelen < 2 || regnamelen > 7 || vallen != 9) - return; - - /* Look up the register name. */ - for (i = 0; reg_table[i].name != NULL; i++) - { - int rlen = strlen (reg_table[i].name); - if (rlen == regnamelen && strncmp (regname, reg_table[i].name, rlen) == 0) - { - regno = reg_table[i].regno; - break; - } - } - if (regno == -1) - return; - - /* Copy the hex value to a buffer and eliminate the embedded space. */ - for (i = 0, p = valbuf; i < vallen; i++) - if (val[i] != ' ') - *p++ = val[i]; - *p = '\0'; - - monitor_supply_register (regno, valbuf); -} - - -/* Fetch the BadVaddr register. Unlike the other registers, this - one can't be modified, and the monitor won't even prompt to let - you modify it. */ - -static void -fetch_bad_vaddr (void) -{ - char buf[20]; - - monitor_printf ("xB\r"); - monitor_expect ("BadV=", NULL, 0); - monitor_expect_prompt (buf, sizeof (buf)); - monitor_supply_register (mips_regnum (current_gdbarch)->badvaddr, buf); -} - - -/* Read a series of bit fields from the monitor, and return their - combined binary value. */ - -static unsigned long -fetch_fields (struct bit_field *bf) -{ - char buf[20]; - unsigned long val = 0; - unsigned long bits; - - for (; bf->prefix != NULL; bf++) - { - monitor_expect (bf->prefix, NULL, 0); /* get prefix */ - monitor_expect (bf->suffix, buf, sizeof (buf)); /* hex value, suffix */ - if (bf->length != 0) - { - bits = strtoul (buf, NULL, 16); /* get field value */ - bits &= ((1 << bf->length) - 1); /* mask out useless bits */ - val |= bits << bf->start; /* insert into register */ - } - - } - - return val; -} - - -static void -fetch_bitmapped_register (int regno, struct bit_field *bf) -{ - unsigned long val; - unsigned char regbuf[MAX_REGISTER_SIZE]; - char *regname = NULL; - - if (regno >= sizeof (r3900_regnames) / sizeof (r3900_regnames[0])) - internal_error (__FILE__, __LINE__, - _("fetch_bitmapped_register: regno out of bounds")); - else - regname = r3900_regnames[regno]; - - monitor_printf ("x%s\r", regname); - val = fetch_fields (bf); - monitor_printf (".\r"); - monitor_expect_prompt (NULL, 0); - - /* supply register stores in target byte order, so swap here */ - - store_unsigned_integer (regbuf, register_size (current_gdbarch, regno), val); - regcache_raw_supply (current_regcache, regno, regbuf); - -} - - -/* Fetch all registers (if regno is -1), or one register from the - monitor. For most registers, we can use the generic monitor_ - monitor_fetch_registers function. But others are displayed in - a very unusual fashion by the monitor, and must be handled specially. */ - -static void -r3900_fetch_registers (int regno) -{ - if (regno == mips_regnum (current_gdbarch)->badvaddr) - fetch_bad_vaddr (); - else if (regno == PS_REGNUM) - fetch_bitmapped_register (PS_REGNUM, status_fields); - else if (regno == mips_regnum (current_gdbarch)->cause) - fetch_bitmapped_register (mips_regnum (current_gdbarch)->cause, - cause_fields); - else - orig_monitor_fetch_registers (regno); -} - - -/* Write the new value of the bitmapped register to the monitor. */ - -static void -store_bitmapped_register (int regno, struct bit_field *bf) -{ - unsigned long oldval, newval; - char *regname = NULL; - - if (regno >= sizeof (r3900_regnames) / sizeof (r3900_regnames[0])) - internal_error (__FILE__, __LINE__, - _("fetch_bitmapped_register: regno out of bounds")); - else - regname = r3900_regnames[regno]; - - /* Fetch the current value of the register. */ - monitor_printf ("x%s\r", regname); - oldval = fetch_fields (bf); - newval = read_register (regno); - - /* To save time, write just the fields that have changed. */ - for (; bf->prefix != NULL; bf++) - { - if (bf->length != 0) - { - unsigned long oldbits, newbits, mask; - - mask = (1 << bf->length) - 1; - oldbits = (oldval >> bf->start) & mask; - newbits = (newval >> bf->start) & mask; - if (oldbits != newbits) - monitor_printf ("%s %lx ", bf->user_name, newbits); - } - } - - monitor_printf (".\r"); - monitor_expect_prompt (NULL, 0); -} - - -static void -r3900_store_registers (int regno) -{ - if (regno == PS_REGNUM) - store_bitmapped_register (PS_REGNUM, status_fields); - else if (regno == mips_regnum (current_gdbarch)->cause) - store_bitmapped_register (mips_regnum (current_gdbarch)->cause, - cause_fields); - else - orig_monitor_store_registers (regno); -} - - -/* Write a 4-byte integer to the buffer in big-endian order. */ - -static void -write_long (char *buf, long n) -{ - buf[0] = (n >> 24) & 0xff; - buf[1] = (n >> 16) & 0xff; - buf[2] = (n >> 8) & 0xff; - buf[3] = n & 0xff; -} - - -/* Write a 4-byte integer to the buffer in little-endian order. */ - -static void -write_long_le (char *buf, long n) -{ - buf[0] = n & 0xff; - buf[1] = (n >> 8) & 0xff; - buf[2] = (n >> 16) & 0xff; - buf[3] = (n >> 24) & 0xff; -} - - -/* Read a character from the monitor. If remote debugging is on, - print the received character. If HEX is non-zero, print the - character in hexadecimal; otherwise, print it in ASCII. */ - -static int -debug_readchar (int hex) -{ - char buf[10]; - int c = monitor_readchar (); - - if (remote_debug > 0) - { - if (hex) - sprintf (buf, "[%02x]", c & 0xff); - else if (c == '\0') - strcpy (buf, "\\0"); - else - { - buf[0] = c; - buf[1] = '\0'; - } - puts_debug ("Read -->", buf, "<--"); - } - return c; -} - - -/* Send a buffer of characters to the monitor. If remote debugging is on, - print the sent buffer in hex. */ - -static void -debug_write (unsigned char *buf, int buflen) -{ - char s[10]; - - monitor_write (buf, buflen); - - if (remote_debug > 0) - { - while (buflen-- > 0) - { - sprintf (s, "[%02x]", *buf & 0xff); - puts_debug ("Sent -->", s, "<--"); - buf++; - } - } -} - - -/* Ignore a packet sent to us by the monitor. It send packets - when its console is in "communications interface" mode. A packet - is of this form: - - start of packet flag (one byte: 0xdc) - packet type (one byte) - length (low byte) - length (high byte) - data (length bytes) - - The last two bytes of the data field are a checksum, but we don't - bother to verify it. - */ - -static void -ignore_packet (void) -{ - int c = -1; - int len; - - /* Ignore lots of trash (messages about section addresses, for example) - until we see the start of a packet. */ - for (len = 0; len < 256; len++) - { - c = debug_readchar (0); - if (c == PESC) - break; - } - if (len == 8) - error (_("Packet header byte not found; %02x seen instead."), c); - - /* Read the packet type and length. */ - c = debug_readchar (1); /* type */ - - c = debug_readchar (1); /* low byte of length */ - len = c & 0xff; - - c = debug_readchar (1); /* high byte of length */ - len += (c & 0xff) << 8; - - /* Ignore the rest of the packet. */ - while (len-- > 0) - c = debug_readchar (1); -} - - -/* Encapsulate some data into a packet and send it to the monitor. - - The 'p' packet is a special case. This is a packet we send - in response to a read ('r') packet from the monitor. This function - appends a one-byte sequence number to the data field of such a packet. - */ - -static void -send_packet (char type, unsigned char *buf, int buflen, int seq) -{ - unsigned char hdr[4]; - int len = buflen; - int sum, i; - - /* If this is a 'p' packet, add one byte for a sequence number. */ - if (type == 'p') - len++; - - /* If the buffer has a non-zero length, add two bytes for a checksum. */ - if (len > 0) - len += 2; - - /* Write the packet header. */ - hdr[0] = PESC; - hdr[1] = type; - hdr[2] = len & 0xff; - hdr[3] = (len >> 8) & 0xff; - debug_write (hdr, sizeof (hdr)); - - if (len) - { - /* Write the packet data. */ - debug_write (buf, buflen); - - /* Write the sequence number if this is a 'p' packet. */ - if (type == 'p') - { - hdr[0] = seq; - debug_write (hdr, 1); - } - - /* Write the checksum. */ - sum = 0; - for (i = 0; i < buflen; i++) - { - int tmp = (buf[i] & 0xff); - if (i & 1) - sum += tmp; - else - sum += tmp << 8; - } - if (type == 'p') - { - if (buflen & 1) - sum += (seq & 0xff); - else - sum += (seq & 0xff) << 8; - } - sum = (sum & 0xffff) + ((sum >> 16) & 0xffff); - sum += (sum >> 16) & 1; - sum = ~sum; - - hdr[0] = (sum >> 8) & 0xff; - hdr[1] = sum & 0xff; - debug_write (hdr, 2); - } -} - - -/* Respond to an expected read request from the monitor by sending - data in chunks. Handle all acknowledgements and handshaking packets. - - The monitor expects a response consisting of a one or more 'p' packets, - each followed by a portion of the data requested. The 'p' packet - contains only a four-byte integer, the value of which is the number - of bytes of data we are about to send. Following the 'p' packet, - the monitor expects the data bytes themselves in raw, unpacketized, - form, without even a checksum. - */ - -static void -process_read_request (unsigned char *buf, int buflen) -{ - unsigned char len[4]; - int i, chunk; - unsigned char seq; - - /* Discard the read request. FIXME: we have to hope it's for - the exact number of bytes we want to send; should check for this. */ - ignore_packet (); - - for (i = chunk = 0, seq = 0; i < buflen; i += chunk, seq++) - { - /* Don't send more than MAXPSIZE bytes at a time. */ - chunk = buflen - i; - if (chunk > MAXPSIZE) - chunk = MAXPSIZE; - - /* Write a packet containing the number of bytes we are sending. */ - write_long_le (len, chunk); - send_packet ('p', len, sizeof (len), seq); - - /* Write the data in raw form following the packet. */ - debug_write (&buf[i], chunk); - - /* Discard the ACK packet. */ - ignore_packet (); - } - - /* Send an "end of data" packet. */ - send_packet ('e', "", 0, 0); -} - - -/* Count loadable sections (helper function for r3900_load). */ - -static void -count_section (bfd *abfd, asection *s, unsigned int *section_count) -{ - if (s->flags & SEC_LOAD && bfd_section_size (abfd, s) != 0) - (*section_count)++; -} - - -/* Load a single BFD section (helper function for r3900_load). - - WARNING: this code is filled with assumptions about how - the Densan monitor loads programs. The monitor issues - packets containing read requests, but rather than respond - to them in an general way, we expect them to following - a certain pattern. - - For example, we know that the monitor will start loading by - issuing an 8-byte read request for the binary file header. - We know this is coming and ignore the actual contents - of the read request packet. - */ - -static void -load_section (bfd *abfd, asection *s, unsigned int *data_count) -{ - if (s->flags & SEC_LOAD) - { - bfd_size_type section_size = bfd_section_size (abfd, s); - bfd_vma section_base = bfd_section_lma (abfd, s); - unsigned char *buffer; - unsigned char header[8]; - - /* Don't output zero-length sections. */ - if (section_size == 0) - return; - if (data_count) - *data_count += section_size; - - /* Print some fluff about the section being loaded. */ - printf_filtered ("Loading section %s, size 0x%lx lma ", - bfd_section_name (abfd, s), (long) section_size); - deprecated_print_address_numeric (section_base, 1, gdb_stdout); - printf_filtered ("\n"); - gdb_flush (gdb_stdout); - - /* Write the section header (location and size). */ - write_long (&header[0], (long) section_base); - write_long (&header[4], (long) section_size); - process_read_request (header, sizeof (header)); - - /* Read the section contents into a buffer, write it out, - then free the buffer. */ - buffer = (unsigned char *) xmalloc (section_size); - bfd_get_section_contents (abfd, s, buffer, 0, section_size); - process_read_request (buffer, section_size); - xfree (buffer); - } -} - - -/* When the ethernet is used as the console port on the Densan board, - we can use the "Rm" command to do a fast binary load. The format - of the download data is: - - number of sections (4 bytes) - starting address (4 bytes) - repeat for each section: - location address (4 bytes) - section size (4 bytes) - binary data - - The 4-byte fields are all in big-endian order. - - Using this command is tricky because we have to put the monitor - into a special funky "communications interface" mode, in which - it sends and receives packets of data along with the normal prompt. - */ - -static void -r3900_load (char *filename, int from_tty) -{ - bfd *abfd; - unsigned int data_count = 0; - time_t start_time, end_time; /* for timing of download */ - int section_count = 0; - unsigned char buffer[8]; - - /* If we are not using the ethernet, use the normal monitor load, - which sends S-records over the serial link. */ - if (!ethernet) - { - orig_monitor_load (filename, from_tty); - return; - } - - /* Open the file. */ - if (filename == NULL || filename[0] == 0) - filename = get_exec_file (1); - abfd = bfd_openr (filename, 0); - if (!abfd) - error (_("Unable to open file %s."), filename); - if (bfd_check_format (abfd, bfd_object) == 0) - error (_("File is not an object file.")); - - /* Output the "vconsi" command to get the monitor in the communication - state where it will accept a load command. This will cause - the monitor to emit a packet before each prompt, so ignore the packet. */ - monitor_printf ("vconsi\r"); - ignore_packet (); - monitor_expect_prompt (NULL, 0); - - /* Output the "Rm" (load) command and respond to the subsequent "open" - packet by sending an ACK packet. */ - monitor_printf ("Rm\r"); - ignore_packet (); - send_packet ('a', "", 0, 0); - - /* Output the fast load header (number of sections and starting address). */ - bfd_map_over_sections ((bfd *) abfd, (section_map_func) count_section, - §ion_count); - write_long (&buffer[0], (long) section_count); - if (exec_bfd) - write_long (&buffer[4], (long) bfd_get_start_address (exec_bfd)); - else - write_long (&buffer[4], 0); - process_read_request (buffer, sizeof (buffer)); - - /* Output the section data. */ - start_time = time (NULL); - bfd_map_over_sections (abfd, (section_map_func) load_section, &data_count); - end_time = time (NULL); - - /* Acknowledge the close packet and put the monitor back into - "normal" mode so it won't send packets any more. */ - ignore_packet (); - send_packet ('a', "", 0, 0); - monitor_expect_prompt (NULL, 0); - monitor_printf ("vconsx\r"); - monitor_expect_prompt (NULL, 0); - - /* Print start address and download performance information. */ - printf_filtered ("Start address 0x%lx\n", (long) bfd_get_start_address (abfd)); - report_transfer_performance (data_count, start_time, end_time); - - /* Finally, make the PC point at the start address */ - if (exec_bfd) - write_pc (bfd_get_start_address (exec_bfd)); - - inferior_ptid = null_ptid; /* No process now */ - - /* This is necessary because many things were based on the PC at the - time that we attached to the monitor, which is no longer valid - now that we have loaded new code (and just changed the PC). - Another way to do this might be to call normal_stop, except that - the stack may not be valid, and things would get horribly - confused... */ - clear_symtab_users (); -} - - -/* Commands to send to the monitor when first connecting: - * The bare carriage return forces a prompt from the monitor - (monitor doesn't prompt immediately after a reset). - * The "vconsx" switches the monitor back to interactive mode - in case an aborted download had left it in packet mode. - * The "Xtr" command causes subsequent "t" (trace) commands to display - the general registers only. - * The "Xxr" command does the same thing for the "x" (examine - registers) command. - * The "bx" command clears all breakpoints. - */ - -static char *r3900_inits[] = -{"\r", "vconsx\r", "Xtr\r", "Xxr\r", "bx\r", NULL}; -static char *dummy_inits[] = -{NULL}; - -static struct target_ops r3900_ops; -static struct monitor_ops r3900_cmds; - -static void -r3900_open (char *args, int from_tty) -{ - char buf[64]; - int i; - - monitor_open (args, &r3900_cmds, from_tty); - - /* We have to handle sending the init strings ourselves, because - the first two strings we send (carriage returns) may not be echoed - by the monitor, but the rest will be. */ - monitor_printf_noecho ("\r\r"); - for (i = 0; r3900_inits[i] != NULL; i++) - { - monitor_printf (r3900_inits[i]); - monitor_expect_prompt (NULL, 0); - } - - /* Attempt to determine whether the console device is ethernet or serial. - This will tell us which kind of load to use (S-records over a serial - link, or the Densan fast binary multi-section format over the net). */ - - ethernet = 0; - monitor_printf ("v\r"); - if (monitor_expect ("console device :", NULL, 0) != -1) - if (monitor_expect ("\n", buf, sizeof (buf)) != -1) - if (strstr (buf, "ethernet") != NULL) - ethernet = 1; - monitor_expect_prompt (NULL, 0); -} - -void -_initialize_r3900_rom (void) -{ - r3900_cmds.flags = MO_NO_ECHO_ON_OPEN | - MO_ADDR_BITS_REMOVE | - MO_CLR_BREAK_USES_ADDR | - MO_GETMEM_READ_SINGLE | - MO_PRINT_PROGRAM_OUTPUT; - - r3900_cmds.init = dummy_inits; - r3900_cmds.cont = "g\r"; - r3900_cmds.step = "t\r"; - r3900_cmds.set_break = "b %A\r"; /* COREADDR */ - r3900_cmds.clr_break = "b %A,0\r"; /* COREADDR */ - r3900_cmds.fill = "fx %A s %x %x\r"; /* COREADDR, len, val */ - - r3900_cmds.setmem.cmdb = "sx %A %x\r"; /* COREADDR, val */ - r3900_cmds.setmem.cmdw = "sh %A %x\r"; /* COREADDR, val */ - r3900_cmds.setmem.cmdl = "sw %A %x\r"; /* COREADDR, val */ - - r3900_cmds.getmem.cmdb = "sx %A\r"; /* COREADDR */ - r3900_cmds.getmem.cmdw = "sh %A\r"; /* COREADDR */ - r3900_cmds.getmem.cmdl = "sw %A\r"; /* COREADDR */ - r3900_cmds.getmem.resp_delim = " : "; - r3900_cmds.getmem.term = " "; - r3900_cmds.getmem.term_cmd = ".\r"; - - r3900_cmds.setreg.cmd = "x%s %x\r"; /* regname, val */ - - r3900_cmds.getreg.cmd = "x%s\r"; /* regname */ - r3900_cmds.getreg.resp_delim = "="; - r3900_cmds.getreg.term = " "; - r3900_cmds.getreg.term_cmd = ".\r"; - - r3900_cmds.dump_registers = "x\r"; - r3900_cmds.register_pattern = - "\\([a-zA-Z0-9_]+\\) *=\\([0-9a-f]+ [0-9a-f]+\\b\\)"; - r3900_cmds.supply_register = r3900_supply_register; - /* S-record download, via "keyboard port". */ - r3900_cmds.load = "r0\r"; - r3900_cmds.prompt = "#"; - r3900_cmds.line_term = "\r"; - r3900_cmds.target = &r3900_ops; - r3900_cmds.stopbits = SERIAL_1_STOPBITS; - r3900_cmds.regnames = r3900_regnames; - r3900_cmds.magic = MONITOR_OPS_MAGIC; - - init_monitor_ops (&r3900_ops); - - r3900_ops.to_shortname = "r3900"; - r3900_ops.to_longname = "R3900 monitor"; - r3900_ops.to_doc = "Debug using the DVE R3900 monitor.\n\ -Specify the serial device it is connected to (e.g. /dev/ttya)."; - r3900_ops.to_open = r3900_open; - - /* Override the functions to fetch and store registers. But save the - addresses of the default functions, because we will use those functions - for "normal" registers. */ - - orig_monitor_fetch_registers = r3900_ops.to_fetch_registers; - orig_monitor_store_registers = r3900_ops.to_store_registers; - r3900_ops.to_fetch_registers = r3900_fetch_registers; - r3900_ops.to_store_registers = r3900_store_registers; - - /* Override the load function, but save the address of the default - function to use when loading S-records over a serial link. */ - orig_monitor_load = r3900_ops.to_load; - r3900_ops.to_load = r3900_load; - - add_target (&r3900_ops); -} -- 2.30.2