From f4e5e9bcfc6798f2b29bb4036fb203ee4229953d Mon Sep 17 00:00:00 2001 From: Craig Burley Date: Sat, 17 Jul 1999 11:52:32 -0400 Subject: [PATCH] update derived files From-SVN: r28144 --- gcc/f/BUGS | 12 +- gcc/f/INSTALL | 1239 +------------------------------------------------ gcc/f/NEWS | 4 +- 3 files changed, 23 insertions(+), 1232 deletions(-) diff --git a/gcc/f/BUGS b/gcc/f/BUGS index ffd90cc8320..60677f45df3 100644 --- a/gcc/f/BUGS +++ b/gcc/f/BUGS @@ -2,7 +2,7 @@ `bugs0.texi' and `bugs.texi'. `BUGS' is *not* a source file, although it is normally included within source distributions. - This file lists known bugs in the FSF-0.5.25 version of the GNU + This file lists known bugs in the GCC-2.95 version of the GNU Fortran compiler. Copyright (C) 1995-1999 Free Software Foundation, Inc. You may copy, distribute, and modify it freely as long as you preserve this copyright notice and permission notice. @@ -11,9 +11,9 @@ Known Bugs In GNU Fortran ************************* This section identifies bugs that `g77' *users* might run into in -the FSF-0.5.25 version of `g77'. This includes bugs that are actually -in the `gcc' back end (GBE) or in `libf2c', because those sets of code -are at least somewhat under the control of (and necessarily intertwined +the GCC-2.95 version of `g77'. This includes bugs that are actually in +the `gcc' back end (GBE) or in `libf2c', because those sets of code are +at least somewhat under the control of (and necessarily intertwined with) `g77', so it isn't worth separating them out. For information on bugs in *other* versions of `g77', see @@ -27,7 +27,7 @@ particularly concentrated on any version of this information that is distributed as part of a *released* `g77'. In particular, while this information is intended to apply to the -FSF-0.5.25 version of `g77', only an official *release* of that version +GCC-2.95 version of `g77', only an official *release* of that version is expected to contain documentation that is most consistent with the `g77' product in that version. @@ -40,7 +40,7 @@ via `http://egcs.cygnus.com/onlinedocs/g77_bugs.html'. Follow the port, build, and install `g77', see "Problems Installing" in `egcs/gcc/f/INSTALL'. - The following information was last updated on 1999-05-06: + The following information was last updated on 1999-06-28: * `g77' fails to warn about use of a "live" iterative-DO variable as an implied-DO variable in a `WRITE' or `PRINT' statement (although diff --git a/gcc/f/INSTALL b/gcc/f/INSTALL index e0349ec0cc8..91858800958 100644 --- a/gcc/f/INSTALL +++ b/gcc/f/INSTALL @@ -13,15 +13,10 @@ Installing GNU Fortran The following information describes how to install `g77'. - The information in this file generally pertains to dealing with -*source* distributions of `g77' and `gcc'. It is possible that some of -this information will be applicable to some *binary* distributions of -these products--however, since these distributions are not made by the -maintainers of `g77', responsibility for binary distributions rests with -whoever built and first distributed them. - - Nevertheless, efforts to make `g77' easier to both build and install -from source and package up as a binary distribution are ongoing. + Note that, for users of the GCC-2.95 version of `g77', much of the +information is obsolete, and is superceded by the GCC installation +procedures. Such information is accordingly omitted and flagged as +such. *Warning:* The information below is still under development, and might not accurately reflect the `g77' code base of which it is a part. @@ -30,230 +25,17 @@ particularly concentrated on any version of this information that is distributed as part of a *released* `g77'. In particular, while this information is intended to apply to the -FSF-0.5.25 version of `g77', only an official *release* of that version +GCC-2.95 version of `g77', only an official *release* of that version is expected to contain documentation that is most consistent with the `g77' product in that version. - The following information was last updated on 1999-05-10: + The following information was last updated on 1999-07-17: Prerequisites ============= - The procedures described to unpack, configure, build, and install -`g77' assume your system has certain programs already installed. - - The following prerequisites should be met by your system before you -follow the `g77' installation instructions: - -`gzip' and `tar' - To unpack the `gcc' and `g77' distributions, you'll need the - `gunzip' utility in the `gzip' distribution. Most UNIX systems - already have `gzip' installed. If yours doesn't, you can get it - from the FSF. - - Note that you'll need `tar' and other utilities as well, but all - UNIX systems have these. There are GNU versions of all these - available--in fact, a complete GNU UNIX system can be put together - on most systems, if desired. - - The version of GNU `gzip' used to package this release is - 1.2.4. (The version of GNU `tar' used to package this release is - 1.12.) - -`gcc-2.8.1.tar.gz' - You need to have this, or some other applicable, version of `gcc' - on your system. The version should be an exact copy of a - distribution from the FSF. Its size is approximately 8.4MB. - - If you've already unpacked `gcc-2.8.1.tar.gz' into a directory - (named `gcc-2.8.1') called the "source tree" for `gcc', you can - delete the distribution itself, but you'll need to remember to - skip any instructions to unpack this distribution. - - Without an applicable `gcc' source tree, you cannot build `g77'. - You can obtain an FSF distribution of `gcc' from the FSF. - -`g77-0.5.25.tar.gz' - You probably have already unpacked this package, or you are - reading an advance copy of these installation instructions, which - are contained in this distribution. The size of this package is - approximately 1.4MB. - - You can obtain an FSF distribution of `g77' from the FSF, the same - way you obtained `gcc'. - -Enough disk space - The amount of disk space needed to unpack, build, install, and use - `g77' depends on the type of system you're using, how you build - `g77', and how much of it you install (primarily, which languages - you install). - - The sizes shown below assume all languages distributed in - `gcc-2.8.1', plus `g77', will be built and installed. These sizes - are indicative of GNU/Linux systems on Intel x86 running COFF and - on Digital Alpha (AXP) systems running ELF. These should be - fairly representative of 32-bit and 64-bit systems, respectively. - - Note that all sizes are approximate and subject to change without - notice! They are based on preliminary releases of g77 made shortly - before the public beta release. - - -- `gcc' and `g77' distributions occupy 10MB packed, 40MB - unpacked. These consist of the source code and documentation, - plus some derived files (mostly documentation), for `gcc' and - `g77'. Any deviations from these numbers for different kinds - of systems are likely to be very minor. - - -- A "bootstrap" build requires an additional 91MB for a total - of 132MB on an ix86, and an additional 136MB for a total of - 177MB on an Alpha. - - -- Removing `gcc/stage1' after the build recovers 13MB for a - total of 119MB on an ix86, and recovers 21MB for a total of - 155MB on an Alpha. - - After doing this, the integrity of the build can still be - verified via `make compare', and the `gcc' compiler modified - and used to build itself for testing fairly quickly, using - the copy of the compiler kept in `gcc/stage2'. - - -- Removing `gcc/stage2' after the build further recovers 39MB - for a total of 80MB, and recovers 57MB for a total of 98MB on - an Alpha. - - After doing this, the compiler can still be installed, - especially if GNU `make' is used to avoid gratuitous rebuilds - (or, the installation can be done by hand). - - -- Installing `gcc' and `g77' copies 23MB onto the `--prefix' - disk for a total of 103MB on an ix86, and copies 31MB onto - the `--prefix' disk for a total of 130MB on an Alpha. - - After installation, if no further modifications and builds of - `gcc' or `g77' are planned, the source and build directory may be - removed, leaving the total impact on a system's disk storage as - that of the amount copied during installation. - - Systems with the appropriate version of `gcc' installed don't - require the complete bootstrap build. Doing a "straight build" - requires about as much space as does a bootstrap build followed by - removing both the `gcc/stage1' and `gcc/stage2' directories. - - Installing `gcc' and `g77' over existing versions might require - less *new* disk space, but note that, unlike many products, `gcc' - installs itself in a way that avoids overwriting other installed - versions of itself, so that other versions may easily be invoked - (via `gcc -V VERSION'). - - So, the amount of space saved as a result of having an existing - version of `gcc' and `g77' already installed is not - much--typically only the command drivers (`gcc', `g77', `g++', and - so on, which are small) and the documentation is overwritten by - the new installation. The rest of the new installation is done - without replacing existing installed versions (assuming they have - different version numbers). - -`make' - Your system must have `make', and you will probably save yourself - a lot of trouble if it is GNU `make' (sometimes referred to as - `gmake'). In particular, you probably need GNU `make' to build - outside the source directory (with `configure''s `--srcdir' - option.) - - The version of GNU `make' used to develop this release is - 3.76.1. - -`cc' - Your system must have a working C compiler. If it doesn't, you - might be able to obtain a prebuilt binary of some version of `gcc' - from the network or on CD-ROM, perhaps from the FSF. The best - source of information about binaries is probably a system-specific - Usenet news group, initially via its FAQ. - - *Note Installing GNU CC: (gcc)Installation, for more information - on prerequisites for installing `gcc'. - -`sed' - All UNIX systems have `sed', but some have a broken version that - cannot handle configuring, building, or installing `gcc' or `g77'. - - The version of GNU `sed' used to develop this release is - 2.05. (Note that GNU `sed' version 3.0 was withdrawn by the - FSF--if you happen to have this version installed, replace it with - version 2.05 immediately. See a GNU distribution site for further - explanation.) - -`root' access or equivalent - To perform the complete installation procedures on a system, you - need to have `root' access to that system, or equivalent access to - the `--prefix' directory tree specified on the `configure' command - line. - - Portions of the procedure (such as configuring and building `g77') - can be performed by any user with enough disk space and virtual - memory. - - However, these instructions are oriented towards less-experienced - users who want to install `g77' on their own personal systems. - - System administrators with more experience will want to determine - for themselves how they want to modify the procedures described - below to suit the needs of their installation. - -`autoconf' - The version of GNU `autoconf' used to develop this release is - 2.12. - - `autoconf' is not needed in the typical case of installing `gcc' - and `g77'. *Note Missing tools?::, for information on when it - might be needed and how to work around not having it. - -`bison' - The version of GNU `bison' used to develop this release is - 1.25. - - `bison' is not needed in the typical case of installing `gcc' and - `g77'. *Note Missing tools?::, for information on when it might - be needed and how to work around not having it. - -`gperf' - The version of GNU `gperf' used to develop this release is - 2.5. - - `gperf' is not needed in the typical case of installing `gcc' and - `g77'. *Note Missing tools?::, for information on when it might - be needed and how to work around not having it. - -`makeinfo' - The version of GNU `makeinfo' used to develop this release is - 1.68. - - `makeinfo' is part of the GNU `texinfo' package; `makeinfo' - version 1.68 is distributed as part of GNU `texinfo' version - 3.12. - - `makeinfo' is not needed in the typical case of installing `gcc' - and `g77'. *Note Missing tools?::, for information on when it - might be needed and how to work around not having it. - - An up-to-date version of GNU `makeinfo' is still convenient when - obtaining a new version of a GNU distribution such as `gcc' or - `g77', as it allows you to obtain the `.diff.gz' file instead of - the entire `.tar.gz' distribution (assuming you have installed - `patch'). - -`patch' - The version of GNU `patch' used to develop this release is - 2.5. - - Beginning with `g77' version 0.5.23, it is no longer necessary to - patch the `gcc' back end to build `g77'. - - An up-to-date version of GNU `patch' is still convenient when - obtaining a new version of a GNU distribution such as `gcc' or - `g77', as it allows you to obtain the `.diff.gz' file instead of - the entire `.tar.gz' distribution (assuming you have installed the - tools needed to rebuild derived files, such as `makeinfo'). + For users of the GCC-2.95 version of `g77', this information is +superceded by the GCC installation instructions. Problems Installing =================== @@ -302,46 +84,7 @@ not yet established. Missing strtoul or bsearch .......................... - On SunOS4 systems, linking the `f771' program used to produce an -error message concerning an undefined symbol named `_strtoul', because -the `strtoul' library function is not provided on that system. - - Other systems have, in the past, been reported to not provide their -own `strtoul' or `bsearch' function. - - Some versions `g77' tried to default to providing bare-bones -versions of `bsearch' and `strtoul' automatically, but every attempt at -this has failed for at least one kind of system. - - To limit the failures to those few systems actually missing the -required routines, the bare-bones versions are still provided, in -`egcs/gcc/f/proj.c', if the appropriate macros are defined. These are -`NEED_BSEARCH' for `bsearch' and `NEED_STRTOUL' for `NEED_STRTOUL'. - - Therefore, if you are sure your system is missing `bsearch' or -`strtoul' in its library, define the relevant macro(s) before building -`g77'. This can be done by editing `egcs/gcc/f/proj.c' and inserting -either or both of the following `#define' statements before the comment -shown: - - /* Insert #define statements here. */ - - #define NEED_BSEARCH - #define NEED_STRTOUL - - Then, continue configuring and building `g77' as usual. - - Or, you can define these on the `make' command line. To build with -the bundled `cc' on SunOS4, for example, try: - make bootstrap BOOT_CFLAGS='-O2 -g -DNEED_STRTOUL' - - If you then encounter problems compiling `egcs/gcc/f/proj.c', it -might be due to a discrepancy between how `bsearch' or `strtoul' are -defined by that file and how they're declared by your system's header -files. - - In that case, you'll have to use some basic knowledge of C to work -around the problem, perhaps by editing `egcs/gcc/f/proj.c' somewhat. + This information does not apply to the GCC-2.95 version of `g77', Cleanup Kills Stage Directories ............................... @@ -592,970 +335,18 @@ support 64-bit systems. Quick Start =========== - This procedure configures, builds, and installs `g77' "out of the -box" and works on most UNIX systems. Each command is identified by a -unique number, used in the explanatory text that follows. For the most -part, the output of each command is not shown, though indications of -the types of responses are given in a few cases. - - To perform this procedure, the installer must be logged in as user -`root'. Much of it can be done while not logged in as `root', and -users experienced with UNIX administration should be able to modify the -procedure properly to do so. - - Following traditional UNIX conventions, it is assumed that the -source trees for `g77' and `gcc' will be placed in `/usr/src'. It also -is assumed that the source distributions themselves already reside in -`/usr/FSF', a naming convention used by the author of `g77' on his own -system: - - /usr/FSF/gcc-2.8.1.tar.gz - /usr/FSF/g77-0.5.25.tar.gz - - If you vary *any* of the steps below, you might run into trouble, -including possibly breaking existing programs for other users of your -system. Before doing so, it is wise to review the explanations of some -of the steps. These explanations follow this list of steps. - - sh[ 1]# cd /usr/src - - sh[ 2]# gunzip -c < /usr/FSF/gcc-2.8.1.tar.gz | tar xf - - [Might say "Broken pipe"...that is normal on some systems.] - - sh[ 3]# gunzip -c < /usr/FSF/g77-0.5.25.tar.gz | tar xf - - ["Broken pipe" again possible.] - - sh[ 4]# ln -s gcc-2.8.1 gcc - - sh[ 5]# ln -s g77-0.5.25 g77 - - sh[ 6]# mv -i g77/* gcc - [No questions should be asked by mv here; or, you made a mistake.] - - sh[ 7]# cd gcc - sh[ 8]# ./configure --prefix=/usr - [Do not do the above if gcc is not installed in /usr/bin. - You might need a different --prefix=..., as - described below.] - - sh[ 9]# make bootstrap - [This takes a long time, and is where most problems occur.] - - sh[10]# make compare - [This verifies that the compiler is `sane'. - If any files are printed, you have likely found a g77 bug.] - - sh[11]# rm -fr stage1 - - sh[12]# make -k install - [The actual installation.] - - sh[13]# g77 -v - [Verify that g77 is installed, obtain version info.] - - sh[14]# - - *Note Updating Your Info Directory: Updating Documentation, for -information on how to update your system's top-level `info' directory -to contain a reference to this manual, so that users of `g77' can -easily find documentation instead of having to ask you for it. - - Elaborations of many of the above steps follows: - -Step 1: `cd /usr/src' - You can build `g77' pretty much anyplace. By convention, this - manual assumes `/usr/src'. It might be helpful if other users on - your system knew where to look for the source code for the - installed version of `g77' and `gcc' in any case. - -Step 3: `gunzip -d < /usr/FSF/g77-0.5.25.tar.gz | tar xf -' - It is not always necessary to obtain the latest version of `g77' - as a complete `.tar.gz' file if you have a complete, earlier - distribution of `g77'. If appropriate, you can unpack that earlier - version of `g77', and then apply the appropriate patches to - achieve the same result--a source tree containing version - 0.5.25 of `g77'. - -Step 4: `ln -s gcc-2.8.1 gcc' - -Step 5: `ln -s g77-0.5.25 g77' - These commands mainly help reduce typing, and help reduce visual - clutter in examples in this manual showing what to type to install - `g77'. - - *Note Unpacking::, for information on using distributions of `g77' - made by organizations other than the FSF. - -Step 6: `mv -i g77/* gcc' - After doing this, you can, if you like, type `rm g77' and `rmdir - g77-0.5.25' to remove the empty directory and the symbol link to - it. But, it might be helpful to leave them around as quick - reminders of which version(s) of `g77' are installed on your - system. - - *Note Unpacking::, for information on the contents of the `g77' - directory (as merged into the `gcc' directory). - -Step 8: `./configure --prefix=/usr' - This is where you specify that the `g77' and `gcc' executables are - to be installed in `/usr/bin/', the `g77' and `gcc' documentation - is to be installed in `/usr/info/' and `/usr/man/', and so on. - - You should ensure that any existing installation of the `gcc' - executable is in `/usr/bin/'. - - However, if that existing version of `gcc' is not 2.8.1, or if you - simply wish to avoid risking overwriting it with a newly built - copy of the same version, you can specify `--prefix=/usr/local' - (which is the default) or some other path, and invoke the newly - installed version directly from that path's `bin' directory. - - *Note Where in the World Does Fortran (and GNU CC) Go?: Where to - Install, for more information on determining where to install - `g77'. *Note Configuring gcc::, for more information on the - configuration process triggered by invoking the `./configure' - script. - -Step 9: `make bootstrap' - *Note Installing GNU CC: (gcc)Installation, for information on the - kinds of diagnostics you should expect during this procedure. - - *Note Building gcc::, for complete `g77'-specific information on - this step. - -Step 10: `make compare' - *Note Where to Port Bugs: Bug Lists, for information on where to - report that you observed files having different contents during - this phase. - - *Note How to Report Bugs: Bug Reporting, for information on *how* - to report bugs like this. - -Step 11: `rm -fr stage1' - You don't need to do this, but it frees up disk space. - -Step 12: `make -k install' - If this doesn't seem to work, try: - - make -k install install-libf77 - - Or, make sure you're using GNU `make'. - - *Note Installation of Binaries::, for more information. - - *Note Updating Your Info Directory: Updating Documentation, for - information on entering this manual into your system's list of - texinfo manuals. - -Step 13: `g77 -v' - If this command prints approximately 25 lines of output, including - the GNU Fortran Front End version number (which should be the same - as the version number for the version of `g77' you just built and - installed) and the version numbers for the three parts of the - `libf2c' library (`libF77', `libI77', `libU77'), and those version - numbers are all in agreement, then there is a high likelihood that - the installation has been successfully completed. - - You might consider doing further testing. For example, log in as - a non-privileged user, then create a small Fortran program, such - as: - - PROGRAM SMTEST - DO 10 I=1, 10 - PRINT *, 'Hello World #', I - 10 CONTINUE - END - - Compile, link, and run the above program, and, assuming you named - the source file `smtest.f', the session should look like this: - - sh# g77 -o smtest smtest.f - sh# ./smtest - Hello World # 1 - Hello World # 2 - Hello World # 3 - Hello World # 4 - Hello World # 5 - Hello World # 6 - Hello World # 7 - Hello World # 8 - Hello World # 9 - Hello World # 10 - sh# - - If invoking `g77' doesn't seem to work, the problem might be that - you've installed it in a location that is not in your shell's - search path. For example, if you specified `--prefix=/gnu', and - `/gnu/bin' is not in your `PATH' environment variable, you must - explicitly specify the location of the compiler via `/gnu/bin/g77 - -o smtest smtest.f'. - - After proper installation, you don't need to keep your gcc and g77 - source and build directories around anymore. Removing them can - free up a lot of disk space. + For users of the GCC-2.95 version of `g77', this information is +superceded by the GCC installation instructions. Complete Installation ===================== - Here is the complete `g77'-specific information on how to configure, -build, and install `g77'. - -Unpacking ---------- - - The `gcc' source distribution is a stand-alone distribution. It is -designed to be unpacked (producing the `gcc' source tree) and built as -is, assuming certain prerequisites are met (including the availability -of compatible UNIX programs such as `make', `cc', and so on). - - However, before building `gcc', you will want to unpack and merge -the `g77' distribution in with it, so that you build a Fortran-capable -version of `gcc', which includes the `g77' command, the necessary -run-time libraries, and this manual. - - Unlike `gcc', the `g77' source distribution is *not* a stand-alone -distribution. It is designed to be unpacked and, afterwards, -immediately merged into an applicable `gcc' source tree. That is, the -`g77' distribution *augments* a `gcc' distribution--without `gcc', -generally only the documentation is immediately usable. - - A sequence of commands typically used to unpack `gcc' and `g77' is: - - sh# cd /usr/src - sh# gunzip -c /usr/FSF/gcc-2.8.1.tar.gz | tar xf - - sh# gunzip -c /usr/FSF/g77-0.5.25.tar.gz | tar xf - - sh# ln -s gcc-2.8.1 gcc - sh# ln -s g77-0.5.25 g77 - sh# mv -i g77/* gcc - - *Notes:* The commands beginning with `gunzip...' might print `Broken -pipe...' as they complete. That is nothing to worry about, unless you -actually *hear* a pipe breaking. The `ln' commands are helpful in -reducing typing and clutter in installation examples in this manual. -Hereafter, the top level of `gcc' source tree is referred to as `gcc', -and the top level of just the `g77' source tree (prior to issuing the -`mv' command, above) is referred to as `g77'. - - There are three top-level names in a `g77' distribution: - - g77/COPYING.g77 - g77/README.g77 - g77/f - - All three entries should be moved (or copied) into a `gcc' source -tree (typically named after its version number and as it appears in the -FSF distributions--e.g. `gcc-2.8.1'). - - `g77/f' is the subdirectory containing all of the code, -documentation, and other information that is specific to `g77'. The -other two files exist to provide information on `g77' to someone -encountering a `gcc' source tree with `g77' already present, who has -not yet read these installation instructions and thus needs help -understanding that the source tree they are looking at does not come -from a single FSF distribution. They also help people encountering an -unmerged `g77' source tree for the first time. - - *Note:* Please use *only* `gcc' and `g77' source trees as -distributed by the FSF. Use of modified versions is likely to result -in problems that appear to be in the `g77' code but, in fact, are not. -Do not use such modified versions unless you understand all the -differences between them and the versions the FSF distributes--in which -case you should be able to modify the `g77' (or `gcc') source trees -appropriately so `g77' and `gcc' can coexist as they do in the stock -FSF distributions. - -Merging Distributions ---------------------- - - After merging the `g77' source tree into the `gcc' source tree, you -have put together a complete `g77' source tree. - - As of version 0.5.23, `g77' no longer modifies the version number of -`gcc', nor does it patch `gcc' itself. - - `g77' still depends on being merged with an appropriate version of -`gcc'. For version 0.5.25 of `g77', the specific version of `gcc' -supported is 2.8.1. - - However, other versions of `gcc' might be suitable "hosts" for this -version of `g77'. - - GNU version numbers make it easy to figure out whether a particular -version of a distribution is newer or older than some other version of -that distribution. The format is, generally, MAJOR.MINOR.PATCH, with -each field being a decimal number. (You can safely ignore leading -zeros; for example, 1.5.3 is the same as 1.5.03.) The MAJOR field only -increases with time. The other two fields are reset to 0 when the -field to their left is incremented; otherwise, they, too, only increase -with time. So, version 2.6.2 is newer than version 2.5.8, and version -3.0 is newer than both. (Trailing `.0' fields often are omitted in -announcements and in names for distributions and the directories they -create.) - - If your version of `gcc' is older than the oldest version supported -by `g77' (as casually determined by listing the contents of -`egcs/gcc/f/INSTALL/', which contains these installation instructions -in plain-text format), you should obtain a newer, supported version of -`gcc'. (You could instead obtain an older version of `g77', or try and -get your `g77' to work with the old `gcc', but neither approach is -recommended, and you shouldn't bother reporting any bugs you find if you -take either approach, because they're probably already fixed in the -newer versions you're not using.) - - If your version of `gcc' is newer than the newest version supported -by `g77', it is possible that your `g77' will work with it anyway. If -the version number for `gcc' differs only in the PATCH field, you might -as well try that version of `gcc'. Since it has the same MAJOR and -MINOR fields, the resulting combination is likely to work. - - So, for example, if a particular version of `g77' has support for -`gcc' versions 2.8.0 and 2.8.1, it is likely that `gcc-2.8.2' would -work well with `g77'. - - However, `gcc-2.9.0' would almost certainly not work with that -version of `g77' without appropriate modifications, so a new version of -`g77' would be needed. - - This complexity is the result of `gcc' and `g77' being separate -distributions. By keeping them separate, each product is able to be -independently improved and distributed to its user base more frequently. - - However, the GBE interface defined by `gcc' typically undergoes some -incompatible changes at least every time the MINOR field of the version -number is incremented, and such changes require corresponding changes to -the `g77' front end (FFE). - -Where in the World Does Fortran (and GNU CC) Go? ------------------------------------------------- - - Before configuring, you should make sure you know where you want the -`g77' and `gcc' binaries to be installed after they're built, because -this information is given to the configuration tool and used during the -build itself. - - A `g77' installation normally includes installation of a -Fortran-aware version of `gcc', so that the `gcc' command recognizes -Fortran source files and knows how to compile them. - - For this to work, the version of `gcc' that you will be building as -part of `g77' *must* be installed as the "active" version of `gcc' on -the system. - - Sometimes people make the mistake of installing `gcc' as -`/usr/local/bin/gcc', leaving an older, non-Fortran-aware version in -`/usr/bin/gcc'. (Or, the opposite happens.) This can result in `gcc' -being unable to compile Fortran source files, because when the older -version of `gcc' is invoked, it complains that it does not recognize -the language, or the file name suffix. - - So, determine whether `gcc' already is installed on your system, -and, if so, *where* it is installed, and prepare to configure the new -version of `gcc' you'll be building so that it installs over the -existing version of `gcc'. - - You might want to back up your existing copy of `/usr/bin/gcc', and -the entire `/usr/lib' directory, before you perform the actual -installation (as described in this manual). - - Existing `gcc' installations typically are found in `/usr' or -`/usr/local'. (This means the commands are installed in `/usr/bin' or -`/usr/local/bin', the libraries in `/usr/lib' or `/usr/local/lib', and -so on.) - - If you aren't certain where the currently installed version of `gcc' -and its related programs reside, look at the output of this command: - - gcc -v -o /tmp/delete-me -xc /dev/null -xnone - - All sorts of interesting information on the locations of various -`gcc'-related programs and data files should be visible in the output -of the above command. (The output also is likely to include a -diagnostic from the linker, since there's no `main_()' function.) -However, you do have to sift through it yourself; `gcc' currently -provides no easy way to ask it where it is installed and where it looks -for the various programs and data files it calls on to do its work. - - Just *building* `g77' should not overwrite any installed -programs--but, usually, after you build `g77', you will want to install -it, so backing up anything it might overwrite is a good idea. (This is -true for any package, not just `g77', though in this case it is -intentional that `g77' overwrites `gcc' if it is already installed--it -is unusual that the installation process for one distribution -intentionally overwrites a program or file installed by another -distribution, although, in this case, `g77' is an augmentation of the -`gcc' distribution.) - - Another reason to back up the existing version first, or make sure -you can restore it easily, is that it might be an older version on -which other users have come to depend for certain behaviors. However, -even the new version of `gcc' you install will offer users the ability -to specify an older version of the actual compilation programs if -desired, and these older versions need not include any `g77' components. -*Note Specifying Target Machine and Compiler Version: (gcc)Target -Options, for information on the `-V' option of `gcc'. - -Configuring GNU CC ------------------- - - `g77' is configured automatically when you configure `gcc'. There -are two parts of `g77' that are configured in two different -ways--`g77', which "camps on" to the `gcc' configuration mechanism, and -`libg2c', which uses a variation of the GNU `autoconf' configuration -system. - - Generally, you shouldn't have to be concerned with either `g77' or -`libg2c' configuration, unless you're configuring `g77' as a -cross-compiler. In this case, the `libg2c' configuration, and possibly -the `g77' and `gcc' configurations as well, might need special -attention. (This also might be the case if you're porting `gcc' to a -whole new system--even if it is just a new operating system on an -existing, supported CPU.) - - To configure the system, see *Note Installing GNU CC: -(gcc)Installation, following the instructions for running `./configure'. -Pay special attention to the `--prefix=' option, which you almost -certainly will need to specify. - - (Note that `gcc' installation information is provided as a -plain-text file in `gcc/INSTALL'.) - - The information printed by the invocation of `./configure' should -show that the `f' directory (the Fortran language) has been configured. -If it does not, there is a problem. - - *Note:* Configuring with the `--srcdir' argument, or by starting in -an empty directory and typing a command such as `../gcc/configure' to -build with separate build and source directories, is known to work with -GNU `make', but it is known to not work with other variants of `make'. -Irix5.2 and SunOS4.1 versions of `make' definitely won't work outside -the source directory at present. - - `g77''s portion of the `configure' script used to issue a warning -message about this when configuring for building binaries outside the -source directory, but no longer does this as of version 0.5.23. - - Instead, `g77' simply rejects most common attempts to build it using -a non-GNU `make' when the build directory is not the same as the source -directory, issuing an explanatory diagnostic. - -Building GNU CC ---------------- - - Building `g77' requires building enough of `gcc' that these -instructions assume you're going to build all of `gcc', including -`g++', `protoize', and so on. You can save a little time and disk -space by changes the `LANGUAGES' macro definition in `gcc/Makefile.in' -or `gcc/Makefile', but if you do that, you're on your own. One change -is almost *certainly* going to cause failures: removing `c' or `f77' -from the definition of the `LANGUAGES' macro. - - After configuring `gcc', which configures `g77' and `libg2c' -automatically, you're ready to start the actual build by invoking -`make'. - - *Note:* You *must* have run the `configure' script in `gcc' before -you run `make', even if you're using an already existing `gcc' -development directory, because `./configure' does the work to recognize -that you've added `g77' to the configuration. - - There are two general approaches to building GNU CC from scratch: - -"bootstrap" - This method uses minimal native system facilities to build a - barebones, unoptimized `gcc', that is then used to compile - ("bootstrap") the entire system. - -"straight" - This method assumes a more complete native system exists, and uses - that just once to build the entire system. - - On all systems without a recent version of `gcc' already installed, -the bootstrap method must be used. In particular, `g77' uses -extensions to the C language offered, apparently, only by `gcc'. - - On most systems with a recent version of `gcc' already installed, -the straight method can be used. This is an advantage, because it -takes less CPU time and disk space for the build. However, it does -require that the system have fairly recent versions of many GNU -programs and other programs, which are not enumerated here. - -Bootstrap Build -............... - - A complete bootstrap build is done by issuing a command beginning -with `make bootstrap ...', as described in *Note Installing GNU CC: -(gcc)Installation. This is the most reliable form of build, but it -does require the most disk space and CPU time, since the complete system -is built twice (in Stages 2 and 3), after an initial build (during -Stage 1) of a minimal `gcc' compiler using the native compiler and -libraries. - - You might have to, or want to, control the way a bootstrap build is -done by entering the `make' commands to build each stage one at a time, -as described in the `gcc' manual. For example, to save time or disk -space, you might want to not bother doing the Stage 3 build, in which -case you are assuming that the `gcc' compiler you have built is -basically sound (because you are giving up the opportunity to compare a -large number of object files to ensure they're identical). - - To save some disk space during installation, after Stage 2 is built, -you can type `rm -fr stage1' to remove the binaries built during Stage -1. - - Also, see *Note Installing GNU CC: (gcc)Installation, for important -information on building `gcc' that is not described in this `g77' -manual. For example, explanations of diagnostic messages and whether -they're expected, or indicate trouble, are found there. - -Straight Build -.............. - - If you have a recent version of `gcc' already installed on your -system, and if you're reasonably certain it produces code that is -object-compatible with the version of `gcc' you want to build as part -of building `g77', you can save time and disk space by doing a straight -build. - - To build just the compilers along with the necessary run-time -libraries, issue the following command: - - make -k CC=gcc - - If you run into problems using this method, you have two options: - - * Abandon this approach and do a bootstrap build. - - * Try to make this approach work by diagnosing the problems you're - running into and retrying. - - Especially if you do the latter, you might consider submitting any -solutions as bug/fix reports. *Note Known Causes of Trouble with GNU -Fortran: Trouble. - - However, understand that many problems preventing a straight build -from working are not `g77' problems, and, in such cases, are not likely -to be addressed in future versions of `g77'. Consider treating them as -`gcc' bugs instead. - -Pre-installation Checks ------------------------ - - Before installing the system, which includes installing `gcc', you -might want to do some minimum checking to ensure that some basic things -work. - - Here are some commands you can try, and output typically printed by -them when they work: - - sh# cd /usr/src/gcc - sh# ./g77 -B./ -v - g77 version 0.5.25 - Driving: ./g77 -B./ -v -c -xf77-version /dev/null -xnone - Reading specs from ./specs - gcc version 2.8.1 - cpp -lang-c -v -isystem ./include -undef -D__GNUC__=2 ... - GNU CPP version 2.8.1 (Alpha GNU/Linux with ELF) - #include "..." search starts here: - #include <...> search starts here: - include - /usr/alpha-linux/include - /usr/lib/gcc-lib/alpha-linux/2.8.1/include - /usr/include - End of search list. - ./f771 -fnull-version -quiet -dumpbase g77-version.f -version ... - GNU F77 version 2.8.1 (alpha-linux) compiled ... - GNU Fortran Front End version 0.5.25 - as -nocpp -o /tmp/cca14485.o /tmp/cca14485.s - ld -m elf64alpha -G 8 -O1 -dynamic-linker /lib/ld-linux.so.2 ... - /tmp/cca14485 - __G77_LIBF77_VERSION__: 0.5.25 - @(#)LIBF77 VERSION 19970919 - __G77_LIBI77_VERSION__: 0.5.25 - @(#) LIBI77 VERSION pjw,dmg-mods 19980405 - __G77_LIBU77_VERSION__: 0.5.25 - @(#) LIBU77 VERSION 19970919 - sh# ./xgcc -B./ -v -o /tmp/delete-me -xc /dev/null -xnone - Reading specs from ./specs - gcc version 2.8.1 - ./cpp -lang-c -v -isystem ./include -undef ... - GNU CPP version 2.8.1 (Alpha GNU/Linux with ELF) - #include "..." search starts here: - #include <...> search starts here: - include - /usr/alpha-linux/include - /usr/lib/gcc-lib/alpha-linux/2.8.1/include - /usr/include - End of search list. - ./cc1 /tmp/cca18063.i -quiet -dumpbase null.c -version ... - GNU C version 2.8.1 (alpha-linux) compiled ... - as -nocpp -o /tmp/cca180631.o /tmp/cca18063.s - ld -m elf64alpha -G 8 -O1 -dynamic-linker /lib/ld-linux.so.2 ... - /usr/lib/crt1.o: In function `_start': - ../sysdeps/alpha/elf/start.S:77: undefined reference to `main' - ../sysdeps/alpha/elf/start.S:77: undefined reference to `main' - sh# - - (Note that long lines have been truncated, and `...' used to -indicate such truncations.) - - The above two commands test whether `g77' and `gcc', respectively, -are able to compile empty (null) source files, whether invocation of -the C preprocessor works, whether libraries can be linked, and so on. - - If the output you get from either of the above two commands is -noticeably different, especially if it is shorter or longer in ways -that do not look consistent with the above sample output, you probably -should not install `gcc' and `g77' until you have investigated further. - - For example, you could try compiling actual applications and seeing -how that works. (You might want to do that anyway, even if the above -tests work.) - - To compile using the not-yet-installed versions of `gcc' and `g77', -use the following commands to invoke them. - - To invoke `g77', type: - - /usr/src/gcc/g77 -B/usr/src/gcc/ ... - - To invoke `gcc', type: - - /usr/src/gcc/xgcc -B/usr/src/gcc/ ... - -Installation of Binaries ------------------------- - - After configuring, building, and testing `g77' and `gcc', when you -are ready to install them on your system, type: - - make -k CC=gcc install - - As described in *Note Installing GNU CC: (gcc)Installation, the -values for the `CC' and `LANGUAGES' macros should be the same as those -you supplied for the build itself. - - So, the details of the above command might vary if you used a -bootstrap build (where you might be able to omit both definitions, or -might have to supply the same definitions you used when building the -final stage) or if you deviated from the instructions for a straight -build. - - If the above command does not install `libg2c.a' as expected, try -this: - - make -k ... install install-libf77 - - We don't know why some non-GNU versions of `make' sometimes require -this alternate command, but they do. (Remember to supply the -appropriate definition for `CC' where you see `...' in the above -command.) - - Note that using the `-k' option tells `make' to continue after some -installation problems, like not having `makeinfo' installed on your -system. It might not be necessary for your system. - - *Note:* `g77' no longer installs files not directly part of `g77', -such as `/usr/bin/f77', `/usr/lib/libf2c.a', and `/usr/include/f2c.h', -or their `/usr/local' equivalents. - - *Note Distributing Binaries::, for information on how to accommodate -systems with no existing non-`g77' `f77' compiler and systems with -`f2c' installed. - -Updating Your Info Directory ----------------------------- - - As part of installing `g77', you should make sure users of `info' -can easily access this manual on-line. - - `g77' does this automatically by invoking the `install-info' command -when you use `make install' to install `g77'. - - If that fails, or if the `info' directory it updates is not the one -normally accessed by users, consider invoking it yourself. For example: - - install-info --info-dir=/usr/info /usr/info/g77.info - - The above example assumes the `g77' documentation already is -installed in `/usr/info' and that `/usr/info/dir' is the file you wish -to update. Adjust the command accordingly, if those assumptions are -wrong. - -Missing tools? --------------- - - A build of `gcc' might fail due to one or more tools being called -upon by `make' (during the build or install process), when those tools -are not installed on your system. - - This situation can result from any of the following actions -(performed by you or someone else): - - * Changing the source code or documentation yourself (as a developer - or technical writer). - - * Applying a patch that changes the source code or documentation - (including, sometimes, the official patches distributed by the - FSF). - - * Deleting the files that are created by the (missing) tools. - - The `make maintainer-clean' command is supposed to delete these - files, so invoking this command without having all the appropriate - tools installed is not recommended. - - * Creating the source directory using a method that does not - preserve the date-time-modified information in the original - distribution. - - For example, the UNIX `cp -r' command copies a directory tree - without preserving the date-time-modified information. Use `cp - -pr' instead. - - The reason these activities cause `make' to try and invoke tools -that it probably wouldn't when building from a perfectly "clean" source -directory containing `gcc' and `g77' is that some files in the source -directory (and the corresponding distribution) aren't really source -files, but *derived* files that are produced by running tools with the -corresponding source files as input. These derived files "depend", in -`make' terminology, on the corresponding source files. - - `make' determines that a file that depends on another needs to be -updated if the date-time-modified information for the source file shows -that it is newer than the corresponding information for the derived -file. - - If it makes that determination, `make' runs the appropriate commands -(specified in the "Makefile") to update the derived file, and this -process typically calls upon one or more installed tools to do the work. - - The "safest" approach to dealing with this situation is to recreate -the `gcc' and `g77' source directories from complete `gcc' and `g77' -distributions known to be provided by the FSF. - - Another fairly "safe" approach is to simply install the tools you -need to complete the build process. This is especially appropriate if -you've changed the source code or applied a patch to do so. - - However, if you're certain that the problem is limited entirely to -incorrect date-time-modified information, that there are no -discrepancies between the contents of source files and files derived -from them in the source directory, you can often update the -date-time-modified information for the derived files to work around the -problem of not having the appropriate tools installed. - - On UNIX systems, the simplest way to update the date-time-modified -information of a file is to use the use the `touch' command. - - How to use `touch' to update the derived files updated by each of -the tools is described below. *Note:* New versions of `g77' might -change the set of files it generates by invoking each of these tools. -If you cannot figure out for yourself how to handle such a situation, -try an older version of `g77' until you find someone who can (or until -you obtain and install the relevant tools). - -Missing `autoconf'? -................... - - If you cannot install `autoconf', make sure you have started with a -*fresh* distribution of `gcc' and `g77', do *not* do `make -maintainer-clean', and, to ensure that `autoconf' is not invoked by -`make' during the build, type these commands: - - sh# cd egcs/libf2c - sh# touch configure libU77/configure - sh# cd ../../.. - sh# - -Missing `bison'? -................ - - If you cannot install `bison', make sure you have started with a -*fresh* distribution of `gcc', do *not* do `make maintainer-clean', -and, to ensure that `bison' is not invoked by `make' during the build, -type these commands: - - sh# cd gcc - sh# touch bi-parser.c bi-parser.h c-parse.c c-parse.h cexp.c - sh# touch cp/parse.c cp/parse.h objc-parse.c - sh# cd .. - sh# - -Missing `gperf'? -................ - - If you cannot install `gperf', make sure you have started with a -*fresh* distribution of `gcc', do *not* do `make maintainer-clean', -and, to ensure that `gperf' is not invoked by `make' during the build, -type these commands: - - sh# cd gcc - sh# touch c-gperf.h - sh# cd .. - sh# - -Missing `makeinfo'? -................... - - If `makeinfo' is needed but unavailable when installing (via `make -install'), some files, like `libg2c.a', might not be installed, because -once `make' determines that it cannot invoke `makeinfo', it cancels any -further processing. - - If you cannot install `makeinfo', an easy work-around is to specify -`MAKEINFO=true' on the `make' command line, or to specify the `-k' -option (`make -k install'). - - Another approach is to force the relevant files to be up-to-date by -typing these commands and then re-trying the installation step: - - sh# cd gcc - sh# touch f/g77.info f/BUGS f/INSTALL f/NEWS - sh# cd .. - sh# + For users of the GCC-2.95 version of `g77', this information is +superceded by the GCC installation instructions. Distributing Binaries ===================== - If you are building `g77' for distribution to others in binary form, -first make sure you are aware of your legal responsibilities (read the -file `gcc/COPYING' thoroughly). - - Then, consider your target audience and decide where `g77' should be -installed. - - For systems like GNU/Linux that have no native Fortran compiler (or -where `g77' could be considered the native compiler for Fortran and -`gcc' for C, etc.), you should definitely configure `g77' for -installation in `/usr/bin' instead of `/usr/local/bin'. Specify the -`--prefix=/usr' option when running `./configure'. - - You might also want to set up the distribution so the `f77' command -is a link to `g77', although a script that accepts "classic" UNIX `f77' -options and translates the command-line to the appropriate `g77' -command line would be more appropriate. If you do this, *please* also -provide a "man page" in `man/man1/f77.1' describing the command. (A -link to `man/man1/g77.1' is appropriate if `bin/f77' is a link to -`bin/g77'.) - - For a system that might already have `f2c' installed, consider -whether inter-operation with `g77' will be important to users of `f2c' -on that system. If you want to improve the likelihood that users will -be able to use both `f2c' and `g77' to compile code for a single program -without encountering link-time or run-time incompatibilities, make sure -that, whenever they intend to combine `f2c'-produced code with -`g77'-produced code in an executable, they: - - * Use the `lib/gcc-lib/.../include/g2c.h' file generated by the - `g77' build in place of the `f2c.h' file that normally comes with - `f2c' (or versions of `g77' prior to 0.5.23) when compiling *all* - of the `f2c'-produced C code - - * Link to the `lib/gcc-lib/.../libg2c.a' library built by the `g77' - build instead of the `libf2c.a' library that normally comes with - `f2c' (or versions of `g77' prior to 0.5.23) - - How you choose to effect the above depends on whether the existing -installation of `f2c' must be maintained. - - In any case, it is important to try and ensure that the installation -keeps working properly even after subsequent re-installation of `f2c', -which probably involves overwriting `/usr/local/lib/libf2c.a' and -`/usr/local/include/f2c.h', or similar. - - At least, copying `libg2c.a' and `g2c.h' into the appropriate -"public" directories allows users to more easily select the version of -`libf2c' they wish to use for a particular build. The names are -changed by `g77' to make this coexistence easier to maintain; even if -`f2c' is installed later, the `g77' files normally installed by its -installation process aren't disturbed. Use of symbolic links from one -set of files to another might result in problems after a subsequent -reinstallation of either `f2c' or `g77', so be sure to alert users of -your distribution accordingly. - - (Make sure you clearly document, in the description of your -distribution, how installation of your distribution will affect -existing installations of `gcc', `f2c', `f77', `libf2c.a', and so on. -Similarly, you should clearly document any requirements you assume will -be met by users of your distribution.) - - For other systems with native `f77' (and `cc') compilers, configure -`g77' as you (or most of your audience) would configure `gcc' for their -installations. Typically this is for installation in `/usr/local', and -would not include a new version of `/usr/bin/f77' or -`/usr/local/bin/f77', so users could still use the native `f77'. - - In any case, for `g77' to work properly, you *must* ensure that the -binaries you distribute include: - -`bin/g77' - This is the command most users use to compile Fortran. - -`bin/gcc' - This is the command some users use to compile Fortran, typically - when compiling programs written in other languages at the same - time. The `bin/gcc' executable file must have been built from a - `gcc' source tree into which a `g77' source tree was merged and - configured, or it will not know how to compile Fortran programs. - -`info/g77.info*' - This is the documentation for `g77'. If it is not included, users - will have trouble understanding diagnostics messages and other - such things, and will send you a lot of email asking questions. - - Please edit this documentation (by editing `egcs/gcc/f/*.texi' and - doing `make doc' from the `/usr/src/gcc' directory) to reflect any - changes you've made to `g77', or at least to encourage users of - your binary distribution to report bugs to you first. - - Also, whether you distribute binaries or install `g77' on your own - system, it might be helpful for everyone to add a line listing - this manual by name and topic to the top-level `info' node in - `/usr/info/dir'. That way, users can find `g77' documentation more - easily. *Note Updating Your Info Directory: Updating - Documentation. - -`man/man1/g77.1' - This is the short man page for `g77'. It is not always kept - up-to-date, but you might as well include it for people who really - like "man" pages. - -`lib/gcc-lib' - This is the directory containing the "private" files installed by - and for `gcc', `g77', `g++', and other GNU compilers. - -`lib/gcc-lib/.../f771' - This is the actual Fortran compiler. - -`lib/gcc-lib/.../libg2c.a' - This is the run-time library for `g77'-compiled programs. - - Whether you want to include the slightly updated (and possibly -improved) versions of `cc1', `cc1plus', and whatever other binaries get -rebuilt with the changes the GNU Fortran distribution makes to the GNU -back end, is up to you. These changes are highly unlikely to break any -compilers, because they involve doing things like adding to the list of -acceptable compiler options (so, for example, `cc1plus' accepts, and -ignores, options that only `f771' actually processes). - - Please assure users that unless they have a specific need for their -existing, older versions of `gcc' command, they are unlikely to -experience any problems by overwriting it with your version--though -they could certainly protect themselves by making backup copies first! - - Otherwise, users might try and install your binaries in a "safe" -place, find they cannot compile Fortran programs with your distribution -(because, perhaps, they're invoking their old version of the `gcc' -command, which does not recognize Fortran programs), and assume that -your binaries (or, more generally, GNU Fortran distributions in -general) are broken, at least for their system. - - Finally, *please* ask for bug reports to go to you first, at least -until you're sure your distribution is widely used and has been well -tested. This especially goes for those of you making any changes to -the `g77' sources to port `g77', e.g. to OS/2. has -received a fair number of bug reports that turned out to be problems -with other peoples' ports and distributions, about which nothing could -be done for the user. Once you are quite certain a bug report does not -involve your efforts, you can forward it to us. + For users of the GCC-2.95 version of `g77', this information is +superceded by the GCC installation instructions. diff --git a/gcc/f/NEWS b/gcc/f/NEWS index 29a056a2c13..39fa2e33953 100644 --- a/gcc/f/NEWS +++ b/gcc/f/NEWS @@ -2,7 +2,7 @@ `news0.texi' and `news.texi'. `NEWS' is *not* a source file, although it is normally included within source distributions. - This file lists news about the FSF-0.5.25 version (and some other + This file lists news about the GCC-2.95 version (and some other versions) of the GNU Fortran compiler. Copyright (C) 1995-1999 Free Software Foundation, Inc. You may copy, distribute, and modify it freely as long as you preserve this copyright notice and permission @@ -50,7 +50,7 @@ particularly concentrated on any version of this information that is distributed as part of a *released* `g77'. In particular, while this information is intended to apply to the -FSF-0.5.25 version of `g77', only an official *release* of that version +GCC-2.95 version of `g77', only an official *release* of that version is expected to contain documentation that is most consistent with the `g77' product in that version. -- 2.30.2