From f50bb868f2145ffcc4d330fd6df6367dd5c804e3 Mon Sep 17 00:00:00 2001 From: Claudiu Zissulescu Date: Wed, 11 Nov 2015 13:28:37 +0100 Subject: [PATCH] arc-common.c (arc_handle_option): Handle ARCv2 options. 2015-11-11 Claudiu Zissulescu * common/config/arc/arc-common.c (arc_handle_option): Handle ARCv2 options. * config/arc/arc-opts.h: Add ARCv2 CPUs. * config/arc/arc-protos.h (arc_secondary_reload_conv): Prototype. * config/arc/arc.c (arc_secondary_reload): Handle subreg (reg) situation, and store instructions with large offsets. (arc_secondary_reload_conv): New function. (arc_init): Add ARCv2 options. (arc_conditional_register_usage): Select the proper register usage for ARCv2 processors. (arc_handle_interrupt_attribute): ILINK2 is only valid for ARCv1 architecture. (arc_compute_function_type): Likewise. (arc_print_operand): Handle new ARCv2 punctuation characters. (arc_return_in_memory): ARCv2 ABI returns in registers up to 16 bytes. (workaround_arc_anomaly, arc_asm_insn_p, arc_loop_hazard): New function. (arc_reorg, arc_hazard): Use it. * config/arc/arc.h (TARGET_CPU_CPP_BUILTINS): Define __HS__ and __EM__. (ASM_SPEC): Add ARCv2 options. (TARGET_NORM): ARC HS has norm instructions by default. (TARGET_OPTFPE): Use optimized floating point emulation for ARC HS. (TARGET_AT_DBR_CONDEXEC): Only for ARC600 family. (TARGET_EM, TARGET_HS, TARGET_V2, TARGET_MPYW, TARGET_MULTI): Define. (SIGNED_INT16, TARGET_MPY, TARGET_ARC700_MPY, TARGET_ANY_MPY): Likewise. (TARGET_ARC600_FAMILY, TARGET_ARCOMPACT_FAMILY): Likewise. (TARGET_LP_WR_INTERLOCK): Likewise. * config/arc/arc.md (commutative_binary_mult_comparison_result_used, movsicc_insn) (mulsi3, mulsi3_600_lib, mulsidi3, mulsidi3_700, mulsi3_highpart) (umulsi3_highpart_i, umulsi3_highpart_int, umulsi3_highpart) (umulsidi3, umulsidi3_700, cstoresi4, simple_return, p_return_i): Use it for ARCv2. (mulhisi3, mulhisi3_imm, mulhisi3_reg, umulhisi3, umulhisi3_imm) (umulhisi3_reg, umulhisi3_reg, mulsi3_v2, nopv, bswapsi2) (prefetch, divsi3, udivsi3 modsi3, umodsi3, arcset, arcsetltu) (arcsetgeu, arcsethi, arcsetls, reload_*_load, reload_*_store) (extzvsi): New pattern. * config/arc/arc.opt: New ARCv2 options. * config/arc/arcEM.md: New file. * config/arc/arcHS.md: Likewise. * config/arc/constraints.md (C3p): New constraint, accepts 1 and 2 values. (Cm2): A signed 9-bit integer constant constraint. (C62): An unsigned 6-bit integer constant constraint. (C16): A signed 16-bit integer constant constraint. * config/arc/predicates.md (mult_operator): Add ARCv2 processort. (short_const_int_operand): New predicate. * config/arc/t-arc-newlib: Add ARCv2 multilib options. * doc/invoke.texi: Add documentation for -mcpu= -mcode-density and -mdiv-rem. From-SVN: r230156 --- gcc/ChangeLog | 59 +++ gcc/common/config/arc/arc-common.c | 34 +- gcc/config/arc/arc-opts.h | 4 +- gcc/config/arc/arc-protos.h | 1 + gcc/config/arc/arc.c | 350 +++++++++++++++--- gcc/config/arc/arc.h | 46 ++- gcc/config/arc/arc.md | 552 ++++++++++++++++++++++++----- gcc/config/arc/arc.opt | 33 ++ gcc/config/arc/arcEM.md | 93 +++++ gcc/config/arc/arcHS.md | 76 ++++ gcc/config/arc/constraints.md | 24 ++ gcc/config/arc/predicates.md | 6 +- gcc/config/arc/t-arc-newlib | 17 +- gcc/doc/invoke.texi | 73 +++- 14 files changed, 1224 insertions(+), 144 deletions(-) create mode 100644 gcc/config/arc/arcEM.md create mode 100644 gcc/config/arc/arcHS.md diff --git a/gcc/ChangeLog b/gcc/ChangeLog index 3834e6a5e86..8946e68c95e 100644 --- a/gcc/ChangeLog +++ b/gcc/ChangeLog @@ -1,3 +1,62 @@ +2015-11-11 Claudiu Zissulescu + + * common/config/arc/arc-common.c (arc_handle_option): Handle ARCv2 + options. + * config/arc/arc-opts.h: Add ARCv2 CPUs. + * config/arc/arc-protos.h (arc_secondary_reload_conv): Prototype. + * config/arc/arc.c (arc_secondary_reload): Handle subreg (reg) + situation, and store instructions with large offsets. + (arc_secondary_reload_conv): New function. + (arc_init): Add ARCv2 options. + (arc_conditional_register_usage): Select the proper register usage + for ARCv2 processors. + (arc_handle_interrupt_attribute): ILINK2 is only valid for ARCv1 + architecture. + (arc_compute_function_type): Likewise. + (arc_print_operand): Handle new ARCv2 punctuation characters. + (arc_return_in_memory): ARCv2 ABI returns in registers up to 16 + bytes. + (workaround_arc_anomaly, arc_asm_insn_p, arc_loop_hazard): New + function. + (arc_reorg, arc_hazard): Use it. + * config/arc/arc.h (TARGET_CPU_CPP_BUILTINS): Define __HS__ and + __EM__. + (ASM_SPEC): Add ARCv2 options. + (TARGET_NORM): ARC HS has norm instructions by default. + (TARGET_OPTFPE): Use optimized floating point emulation for ARC + HS. + (TARGET_AT_DBR_CONDEXEC): Only for ARC600 family. + (TARGET_EM, TARGET_HS, TARGET_V2, TARGET_MPYW, TARGET_MULTI): + Define. + (SIGNED_INT16, TARGET_MPY, TARGET_ARC700_MPY, TARGET_ANY_MPY): + Likewise. + (TARGET_ARC600_FAMILY, TARGET_ARCOMPACT_FAMILY): Likewise. + (TARGET_LP_WR_INTERLOCK): Likewise. + * config/arc/arc.md + (commutative_binary_mult_comparison_result_used, movsicc_insn) + (mulsi3, mulsi3_600_lib, mulsidi3, mulsidi3_700, mulsi3_highpart) + (umulsi3_highpart_i, umulsi3_highpart_int, umulsi3_highpart) + (umulsidi3, umulsidi3_700, cstoresi4, simple_return, p_return_i): + Use it for ARCv2. + (mulhisi3, mulhisi3_imm, mulhisi3_reg, umulhisi3, umulhisi3_imm) + (umulhisi3_reg, umulhisi3_reg, mulsi3_v2, nopv, bswapsi2) + (prefetch, divsi3, udivsi3 modsi3, umodsi3, arcset, arcsetltu) + (arcsetgeu, arcsethi, arcsetls, reload_*_load, reload_*_store) + (extzvsi): New pattern. + * config/arc/arc.opt: New ARCv2 options. + * config/arc/arcEM.md: New file. + * config/arc/arcHS.md: Likewise. + * config/arc/constraints.md (C3p): New constraint, accepts 1 and 2 + values. + (Cm2): A signed 9-bit integer constant constraint. + (C62): An unsigned 6-bit integer constant constraint. + (C16): A signed 16-bit integer constant constraint. + * config/arc/predicates.md (mult_operator): Add ARCv2 processort. + (short_const_int_operand): New predicate. + * config/arc/t-arc-newlib: Add ARCv2 multilib options. + * doc/invoke.texi: Add documentation for -mcpu= + -mcode-density and -mdiv-rem. + 2015-11-11 Julia Koval * config/i386/i386.c (m_SKYLAKE_AVX512): Fix typo. diff --git a/gcc/common/config/arc/arc-common.c b/gcc/common/config/arc/arc-common.c index 489bdb22533..c06f488d285 100644 --- a/gcc/common/config/arc/arc-common.c +++ b/gcc/common/config/arc/arc-common.c @@ -33,7 +33,7 @@ arc_option_init_struct (struct gcc_options *opts) { opts->x_flag_no_common = 255; /* Mark as not user-initialized. */ - /* Which cpu we're compiling for (ARC600, ARC601, ARC700). */ + /* Which cpu we're compiling for (ARC600, ARC601, ARC700, ARCv2). */ arc_cpu = PROCESSOR_NONE; } @@ -68,6 +68,7 @@ arc_handle_option (struct gcc_options *opts, struct gcc_options *opts_set, { size_t code = decoded->opt_index; int value = decoded->value; + const char *arg = decoded->arg; switch (code) { @@ -91,9 +92,40 @@ arc_handle_option (struct gcc_options *opts, struct gcc_options *opts_set, if (! (opts_set->x_target_flags & MASK_BARREL_SHIFTER) ) opts->x_target_flags &= ~MASK_BARREL_SHIFTER; break; + case PROCESSOR_ARCHS: + if ( !(opts_set->x_target_flags & MASK_BARREL_SHIFTER)) + opts->x_target_flags |= MASK_BARREL_SHIFTER; /* Default: on. */ + if ( !(opts_set->x_target_flags & MASK_CODE_DENSITY)) + opts->x_target_flags |= MASK_CODE_DENSITY; /* Default: on. */ + if ( !(opts_set->x_target_flags & MASK_NORM_SET)) + opts->x_target_flags |= MASK_NORM_SET; /* Default: on. */ + if ( !(opts_set->x_target_flags & MASK_SWAP_SET)) + opts->x_target_flags |= MASK_SWAP_SET; /* Default: on. */ + if ( !(opts_set->x_target_flags & MASK_DIVREM)) + opts->x_target_flags |= MASK_DIVREM; /* Default: on. */ + break; + + case PROCESSOR_ARCEM: + if ( !(opts_set->x_target_flags & MASK_BARREL_SHIFTER)) + opts->x_target_flags |= MASK_BARREL_SHIFTER; /* Default: on. */ + if ( !(opts_set->x_target_flags & MASK_CODE_DENSITY)) + opts->x_target_flags &= ~MASK_CODE_DENSITY; /* Default: off. */ + if ( !(opts_set->x_target_flags & MASK_NORM_SET)) + opts->x_target_flags &= ~MASK_NORM_SET; /* Default: off. */ + if ( !(opts_set->x_target_flags & MASK_SWAP_SET)) + opts->x_target_flags &= ~MASK_SWAP_SET; /* Default: off. */ + if ( !(opts_set->x_target_flags & MASK_DIVREM)) + opts->x_target_flags &= ~MASK_DIVREM; /* Default: off. */ + break; default: gcc_unreachable (); } + break; + + case OPT_mmpy_option_: + if (value < 0 || value > 9) + error_at (loc, "bad value %qs for -mmpy-option switch", arg); + break; } return true; diff --git a/gcc/config/arc/arc-opts.h b/gcc/config/arc/arc-opts.h index cca1f035636..a33f4b77521 100644 --- a/gcc/config/arc/arc-opts.h +++ b/gcc/config/arc/arc-opts.h @@ -23,5 +23,7 @@ enum processor_type PROCESSOR_NONE, PROCESSOR_ARC600, PROCESSOR_ARC601, - PROCESSOR_ARC700 + PROCESSOR_ARC700, + PROCESSOR_ARCEM, + PROCESSOR_ARCHS }; diff --git a/gcc/config/arc/arc-protos.h b/gcc/config/arc/arc-protos.h index ff82ecf63dd..6e04351159b 100644 --- a/gcc/config/arc/arc-protos.h +++ b/gcc/config/arc/arc-protos.h @@ -118,3 +118,4 @@ extern bool arc_epilogue_uses (int regno); extern int regno_clobbered_p (unsigned int, rtx_insn *, machine_mode, int); extern int arc_return_slot_offset (void); extern bool arc_legitimize_reload_address (rtx *, machine_mode, int, int); +extern void arc_secondary_reload_conv (rtx, rtx, rtx, bool); diff --git a/gcc/config/arc/arc.c b/gcc/config/arc/arc.c index 01261bc702a..85d53e4d2e3 100644 --- a/gcc/config/arc/arc.c +++ b/gcc/config/arc/arc.c @@ -590,10 +590,26 @@ arc_sched_adjust_priority (rtx_insn *insn, int priority) return priority; } +/* For ARC base register + offset addressing, the validity of the + address is mode-dependent for most of the offset range, as the + offset can be scaled by the access size. + We don't expose these as mode-dependent addresses in the + mode_dependent_address_p target hook, because that would disable + lots of optimizations, and most uses of these addresses are for 32 + or 64 bit accesses anyways, which are fine. + However, that leaves some addresses for 8 / 16 bit values not + properly reloaded by the generic code, which is why we have to + schedule secondary reloads for these. */ + static reg_class_t -arc_secondary_reload (bool in_p, rtx x, reg_class_t cl, machine_mode, - secondary_reload_info *) +arc_secondary_reload (bool in_p, + rtx x, + reg_class_t cl, + machine_mode mode, + secondary_reload_info *sri) { + enum rtx_code code = GET_CODE (x); + if (cl == DOUBLE_REGS) return GENERAL_REGS; @@ -601,9 +617,86 @@ arc_secondary_reload (bool in_p, rtx x, reg_class_t cl, machine_mode, if ((cl == LPCOUNT_REG || cl == WRITABLE_CORE_REGS) && in_p && MEM_P (x)) return GENERAL_REGS; + + /* If we have a subreg (reg), where reg is a pseudo (that will end in + a memory location), then we may need a scratch register to handle + the fp/sp+largeoffset address. */ + if (code == SUBREG) + { + rtx addr = NULL_RTX; + x = SUBREG_REG (x); + + if (REG_P (x)) + { + int regno = REGNO (x); + if (regno >= FIRST_PSEUDO_REGISTER) + regno = reg_renumber[regno]; + + if (regno != -1) + return NO_REGS; + + /* It is a pseudo that ends in a stack location. */ + if (reg_equiv_mem (REGNO (x))) + { + /* Get the equivalent address and check the range of the + offset. */ + rtx mem = reg_equiv_mem (REGNO (x)); + addr = find_replacement (&XEXP (mem, 0)); + } + } + else + { + gcc_assert (MEM_P (x)); + addr = XEXP (x, 0); + addr = simplify_rtx (addr); + } + if (addr && GET_CODE (addr) == PLUS + && CONST_INT_P (XEXP (addr, 1)) + && (!RTX_OK_FOR_OFFSET_P (mode, XEXP (addr, 1)))) + { + switch (mode) + { + case QImode: + sri->icode = + in_p ? CODE_FOR_reload_qi_load : CODE_FOR_reload_qi_store; + break; + case HImode: + sri->icode = + in_p ? CODE_FOR_reload_hi_load : CODE_FOR_reload_hi_store; + break; + default: + break; + } + } + } return NO_REGS; } +/* Convert reloads using offsets that are too large to use indirect + addressing. */ + +void +arc_secondary_reload_conv (rtx reg, rtx mem, rtx scratch, bool store_p) +{ + rtx addr; + + gcc_assert (GET_CODE (mem) == MEM); + addr = XEXP (mem, 0); + + /* Large offset: use a move. FIXME: ld ops accepts limms as + offsets. Hence, the following move insn is not required. */ + emit_move_insn (scratch, addr); + mem = replace_equiv_address_nv (mem, scratch); + + /* Now create the move. */ + if (store_p) + emit_insn (gen_rtx_SET (mem, reg)); + else + emit_insn (gen_rtx_SET (reg, mem)); + + return; +} + static unsigned arc_ifcvt (void); namespace { @@ -687,23 +780,35 @@ arc_init (void) { enum attr_tune tune_dflt = TUNE_NONE; - if (TARGET_ARC600) + switch (arc_cpu) { + case PROCESSOR_ARC600: arc_cpu_string = "ARC600"; tune_dflt = TUNE_ARC600; - } - else if (TARGET_ARC601) - { + break; + + case PROCESSOR_ARC601: arc_cpu_string = "ARC601"; tune_dflt = TUNE_ARC600; - } - else if (TARGET_ARC700) - { + break; + + case PROCESSOR_ARC700: arc_cpu_string = "ARC700"; tune_dflt = TUNE_ARC700_4_2_STD; + break; + + case PROCESSOR_ARCEM: + arc_cpu_string = "EM"; + break; + + case PROCESSOR_ARCHS: + arc_cpu_string = "HS"; + break; + + default: + gcc_unreachable (); } - else - gcc_unreachable (); + if (arc_tune == TUNE_NONE) arc_tune = tune_dflt; /* Note: arc_multcost is only used in rtx_cost if speed is true. */ @@ -737,15 +842,15 @@ arc_init (void) } /* Support mul64 generation only for ARC600. */ - if (TARGET_MUL64_SET && TARGET_ARC700) - error ("-mmul64 not supported for ARC700"); + if (TARGET_MUL64_SET && (!TARGET_ARC600_FAMILY)) + error ("-mmul64 not supported for ARC700 or ARCv2"); - /* MPY instructions valid only for ARC700. */ - if (TARGET_NOMPY_SET && !TARGET_ARC700) - error ("-mno-mpy supported only for ARC700"); + /* MPY instructions valid only for ARC700 or ARCv2. */ + if (TARGET_NOMPY_SET && TARGET_ARC600_FAMILY) + error ("-mno-mpy supported only for ARC700 or ARCv2"); /* mul/mac instructions only for ARC600. */ - if (TARGET_MULMAC_32BY16_SET && !(TARGET_ARC600 || TARGET_ARC601)) + if (TARGET_MULMAC_32BY16_SET && (!TARGET_ARC600_FAMILY)) error ("-mmul32x16 supported only for ARC600 or ARC601"); if (!TARGET_DPFP && TARGET_DPFP_DISABLE_LRSR) @@ -757,18 +862,25 @@ arc_init (void) error ("FPX fast and compact options cannot be specified together"); /* FPX-2. No fast-spfp for arc600 or arc601. */ - if (TARGET_SPFP_FAST_SET && (TARGET_ARC600 || TARGET_ARC601)) + if (TARGET_SPFP_FAST_SET && TARGET_ARC600_FAMILY) error ("-mspfp_fast not available on ARC600 or ARC601"); /* FPX-3. No FPX extensions on pre-ARC600 cores. */ if ((TARGET_DPFP || TARGET_SPFP) - && !(TARGET_ARC600 || TARGET_ARC601 || TARGET_ARC700)) + && !TARGET_ARCOMPACT_FAMILY) error ("FPX extensions not available on pre-ARC600 cores"); + /* Only selected multiplier configurations are available for HS. */ + if (TARGET_HS && ((arc_mpy_option > 2 && arc_mpy_option < 7) + || (arc_mpy_option == 1))) + error ("This multiplier configuration is not available for HS cores"); + /* Warn for unimplemented PIC in pre-ARC700 cores, and disable flag_pic. */ - if (flag_pic && !TARGET_ARC700) + if (flag_pic && TARGET_ARC600_FAMILY) { - warning (DK_WARNING, "PIC is not supported for %s. Generating non-PIC code only..", arc_cpu_string); + warning (DK_WARNING, + "PIC is not supported for %s. Generating non-PIC code only..", + arc_cpu_string); flag_pic = 0; } @@ -782,6 +894,8 @@ arc_init (void) arc_punct_chars['!'] = 1; arc_punct_chars['^'] = 1; arc_punct_chars['&'] = 1; + arc_punct_chars['+'] = 1; + arc_punct_chars['_'] = 1; if (optimize > 1 && !TARGET_NO_COND_EXEC) { @@ -825,7 +939,7 @@ arc_override_options (void) if (flag_no_common == 255) flag_no_common = !TARGET_NO_SDATA_SET; - /* TARGET_COMPACT_CASESI needs the "q" register class. */ \ + /* TARGET_COMPACT_CASESI needs the "q" register class. */ if (TARGET_MIXED_CODE) TARGET_Q_CLASS = 1; if (!TARGET_Q_CLASS) @@ -1198,6 +1312,8 @@ arc_init_reg_tables (void) char rname57[5] = "r57"; char rname58[5] = "r58"; char rname59[5] = "r59"; + char rname29[7] = "ilink1"; + char rname30[7] = "ilink2"; static void arc_conditional_register_usage (void) @@ -1206,6 +1322,14 @@ arc_conditional_register_usage (void) int i; int fix_start = 60, fix_end = 55; + if (TARGET_V2) + { + /* For ARCv2 the core register set is changed. */ + strcpy (rname29, "ilink"); + strcpy (rname30, "r30"); + fixed_regs[30] = call_used_regs[30] = 1; + } + if (TARGET_MUL64_SET) { fix_start = 57; @@ -1271,7 +1395,7 @@ arc_conditional_register_usage (void) machine_dependent_reorg. */ if (TARGET_ARC600) CLEAR_HARD_REG_BIT (reg_class_contents[SIBCALL_REGS], LP_COUNT); - else if (!TARGET_ARC700) + else if (!TARGET_LP_WR_INTERLOCK) fixed_regs[LP_COUNT] = 1; for (regno = 0; regno < FIRST_PSEUDO_REGISTER; regno++) if (!call_used_regs[regno]) @@ -1279,7 +1403,7 @@ arc_conditional_register_usage (void) for (regno = 32; regno < 60; regno++) if (!fixed_regs[regno]) SET_HARD_REG_BIT (reg_class_contents[WRITABLE_CORE_REGS], regno); - if (TARGET_ARC700) + if (!TARGET_ARC600_FAMILY) { for (regno = 32; regno <= 60; regno++) CLEAR_HARD_REG_BIT (reg_class_contents[CHEAP_CORE_REGS], regno); @@ -1313,7 +1437,7 @@ arc_conditional_register_usage (void) = (fixed_regs[i] ? (TEST_HARD_REG_BIT (reg_class_contents[CHEAP_CORE_REGS], i) ? CHEAP_CORE_REGS : ALL_CORE_REGS) - : ((TARGET_ARC700 + : (((!TARGET_ARC600_FAMILY) && TEST_HARD_REG_BIT (reg_class_contents[CHEAP_CORE_REGS], i)) ? CHEAP_CORE_REGS : WRITABLE_CORE_REGS)); else @@ -1331,7 +1455,8 @@ arc_conditional_register_usage (void) /* Handle Special Registers. */ arc_regno_reg_class[29] = LINK_REGS; /* ilink1 register. */ - arc_regno_reg_class[30] = LINK_REGS; /* ilink2 register. */ + if (!TARGET_V2) + arc_regno_reg_class[30] = LINK_REGS; /* ilink2 register. */ arc_regno_reg_class[31] = LINK_REGS; /* blink register. */ arc_regno_reg_class[60] = LPCOUNT_REG; arc_regno_reg_class[61] = NO_REGS; /* CC_REG: must be NO_REGS. */ @@ -1413,13 +1538,23 @@ arc_handle_interrupt_attribute (tree *, tree name, tree args, int, *no_add_attrs = true; } else if (strcmp (TREE_STRING_POINTER (value), "ilink1") - && strcmp (TREE_STRING_POINTER (value), "ilink2")) + && strcmp (TREE_STRING_POINTER (value), "ilink2") + && !TARGET_V2) { warning (OPT_Wattributes, "argument of %qE attribute is not \"ilink1\" or \"ilink2\"", name); *no_add_attrs = true; } + else if (TARGET_V2 + && strcmp (TREE_STRING_POINTER (value), "ilink")) + { + warning (OPT_Wattributes, + "argument of %qE attribute is not \"ilink\"", + name); + *no_add_attrs = true; + } + return NULL_TREE; } @@ -1931,7 +2066,8 @@ arc_compute_function_type (struct function *fun) { tree value = TREE_VALUE (args); - if (!strcmp (TREE_STRING_POINTER (value), "ilink1")) + if (!strcmp (TREE_STRING_POINTER (value), "ilink1") + || !strcmp (TREE_STRING_POINTER (value), "ilink")) fn_type = ARC_FUNCTION_ILINK1; else if (!strcmp (TREE_STRING_POINTER (value), "ilink2")) fn_type = ARC_FUNCTION_ILINK2; @@ -3115,6 +3251,18 @@ arc_print_operand (FILE *file, rtx x, int code) if (TARGET_ANNOTATE_ALIGN && cfun->machine->size_reason) fprintf (file, "; unalign: %d", cfun->machine->unalign); return; + case '+': + if (TARGET_V2) + fputs ("m", file); + else + fputs ("h", file); + return; + case '_': + if (TARGET_V2) + fputs ("h", file); + else + fputs ("w", file); + return; default : /* Unknown flag. */ output_operand_lossage ("invalid operand output code"); @@ -4224,7 +4372,7 @@ arc_rtx_costs (rtx x, machine_mode mode, int outer_code, *total= arc_multcost; /* We do not want synth_mult sequences when optimizing for size. */ - else if (TARGET_MUL64_SET || (TARGET_ARC700 && !TARGET_NOMPY_SET)) + else if (TARGET_MUL64_SET || TARGET_ARC700_MPY) *total = COSTS_N_INSNS (1); else *total = COSTS_N_INSNS (2); @@ -5639,7 +5787,7 @@ arc_return_in_memory (const_tree type, const_tree fntype ATTRIBUTE_UNUSED) else { HOST_WIDE_INT size = int_size_in_bytes (type); - return (size == -1 || size > 8); + return (size == -1 || size > (TARGET_V2 ? 16 : 8)); } } @@ -5737,6 +5885,26 @@ arc_invalid_within_doloop (const rtx_insn *insn) return NULL; } +/* The same functionality as arc_hazard. It is called in machine + reorg before any other optimization. Hence, the NOP size is taken + into account when doing branch shortening. */ + +static void +workaround_arc_anomaly (void) +{ + rtx_insn *insn, *succ0; + + /* For any architecture: call arc_hazard here. */ + for (insn = get_insns (); insn; insn = NEXT_INSN (insn)) + { + succ0 = next_real_insn (insn); + if (arc_hazard (insn, succ0)) + { + emit_insn_before (gen_nopv (), succ0); + } + } +} + static int arc_reorg_in_progress = 0; /* ARC's machince specific reorg function. */ @@ -5750,6 +5918,8 @@ arc_reorg (void) long offset; int changed; + workaround_arc_anomaly (); + cfun->machine->arc_reorg_started = 1; arc_reorg_in_progress = 1; @@ -7758,6 +7928,109 @@ arc600_corereg_hazard (rtx_insn *pred, rtx_insn *succ) return 0; } +/* Given a rtx, check if it is an assembly instruction or not. */ + +static int +arc_asm_insn_p (rtx x) +{ + int i, j; + + if (x == 0) + return 0; + + switch (GET_CODE (x)) + { + case ASM_OPERANDS: + case ASM_INPUT: + return 1; + + case SET: + return arc_asm_insn_p (SET_SRC (x)); + + case PARALLEL: + j = 0; + for (i = XVECLEN (x, 0) - 1; i >= 0; i--) + j += arc_asm_insn_p (XVECEXP (x, 0, i)); + if ( j > 0) + return 1; + break; + + default: + break; + } + + return 0; +} + +/* We might have a CALL to a non-returning function before a loop end. + ??? Although the manual says that's OK (the target is outside the + loop, and the loop counter unused there), the assembler barfs on + this for ARC600, so we must insert a nop before such a call too. + For ARC700, and ARCv2 is not allowed to have the last ZOL + instruction a jump to a location where lp_count is modified. */ + +static bool +arc_loop_hazard (rtx_insn *pred, rtx_insn *succ) +{ + rtx_insn *jump = NULL; + rtx_insn *label = NULL; + basic_block succ_bb; + + if (recog_memoized (succ) != CODE_FOR_doloop_end_i) + return false; + + /* Phase 1: ARC600 and ARCv2HS doesn't allow any control instruction + (i.e., jump/call) as the last instruction of a ZOL. */ + if (TARGET_ARC600 || TARGET_HS) + if (JUMP_P (pred) || CALL_P (pred) + || arc_asm_insn_p (PATTERN (pred)) + || GET_CODE (PATTERN (pred)) == SEQUENCE) + return true; + + /* Phase 2: Any architecture, it is not allowed to have the last ZOL + instruction a jump to a location where lp_count is modified. */ + + /* Phase 2a: Dig for the jump instruction. */ + if (JUMP_P (pred)) + jump = pred; + else if (GET_CODE (PATTERN (pred)) == SEQUENCE + && JUMP_P (XVECEXP (PATTERN (pred), 0, 0))) + jump = as_a XVECEXP (PATTERN (pred), 0, 0); + else + return false; + + label = JUMP_LABEL_AS_INSN (jump); + if (!label) + return false; + + /* Phase 2b: Make sure is not a millicode jump. */ + if ((GET_CODE (PATTERN (jump)) == PARALLEL) + && (XVECEXP (PATTERN (jump), 0, 0) == ret_rtx)) + return false; + + /* Phase 2c: Make sure is not a simple_return. */ + if ((GET_CODE (PATTERN (jump)) == SIMPLE_RETURN) + || (GET_CODE (label) == SIMPLE_RETURN)) + return false; + + /* Pahse 2d: Go to the target of the jump and check for aliveness of + LP_COUNT register. */ + succ_bb = BLOCK_FOR_INSN (label); + if (!succ_bb) + { + gcc_assert (NEXT_INSN (label)); + if (NOTE_INSN_BASIC_BLOCK_P (NEXT_INSN (label))) + succ_bb = NOTE_BASIC_BLOCK (NEXT_INSN (label)); + else + succ_bb = BLOCK_FOR_INSN (NEXT_INSN (label)); + } + + if (succ_bb && REGNO_REG_SET_P (df_get_live_out (succ_bb), LP_COUNT)) + return true; + + return false; +} + /* For ARC600: A write to a core reg greater or equal to 32 must not be immediately followed by a use. Anticipate the length requirement to insert a nop @@ -7766,19 +8039,16 @@ arc600_corereg_hazard (rtx_insn *pred, rtx_insn *succ) int arc_hazard (rtx_insn *pred, rtx_insn *succ) { - if (!TARGET_ARC600) - return 0; if (!pred || !INSN_P (pred) || !succ || !INSN_P (succ)) return 0; - /* We might have a CALL to a non-returning function before a loop end. - ??? Although the manual says that's OK (the target is outside the loop, - and the loop counter unused there), the assembler barfs on this, so we - must instert a nop before such a call too. */ - if (recog_memoized (succ) == CODE_FOR_doloop_end_i - && (JUMP_P (pred) || CALL_P (pred) - || GET_CODE (PATTERN (pred)) == SEQUENCE)) + + if (arc_loop_hazard (pred, succ)) return 4; - return arc600_corereg_hazard (pred, succ); + + if (TARGET_ARC600) + return arc600_corereg_hazard (pred, succ); + + return 0; } /* Return length adjustment for INSN. */ diff --git a/gcc/config/arc/arc.h b/gcc/config/arc/arc.h index e8baf5b8d79..d312f9f14a7 100644 --- a/gcc/config/arc/arc.h +++ b/gcc/config/arc/arc.h @@ -80,6 +80,14 @@ along with GCC; see the file COPYING3. If not see builtin_define ("__A7__"); \ builtin_define ("__ARC700__"); \ } \ + else if (TARGET_EM) \ + { \ + builtin_define ("__EM__"); \ + } \ + else if (TARGET_HS) \ + { \ + builtin_define ("__HS__"); \ + } \ if (TARGET_NORM) \ { \ builtin_define ("__ARC_NORM__");\ @@ -143,6 +151,8 @@ along with GCC; see the file COPYING3. If not see %{mcpu=ARC700|!mcpu=*:%{mlock}} \ %{mcpu=ARC700|!mcpu=*:%{mswape}} \ %{mcpu=ARC700|!mcpu=*:%{mrtsc}} \ +%{mcpu=ARCHS:-mHS} \ +%{mcpu=ARCEM:-mEM} \ " #if DEFAULT_LIBC == LIBC_UCLIBC @@ -246,12 +256,13 @@ along with GCC; see the file COPYING3. If not see /* Non-zero means the cpu supports norm instruction. This flag is set by default for A7, and only for pre A7 cores when -mnorm is given. */ -#define TARGET_NORM (TARGET_ARC700 || TARGET_NORM_SET) +#define TARGET_NORM (TARGET_ARC700 || TARGET_NORM_SET || TARGET_HS) /* Indicate if an optimized floating point emulation library is available. */ #define TARGET_OPTFPE \ (TARGET_ARC700 \ /* We need a barrel shifter and NORM. */ \ - || (TARGET_ARC600 && TARGET_NORM_SET)) + || (TARGET_ARC600 && TARGET_NORM_SET) \ + || TARGET_HS) /* Non-zero means the cpu supports swap instruction. This flag is set by default for A7, and only for pre A7 cores when -mswap is given. */ @@ -271,11 +282,15 @@ along with GCC; see the file COPYING3. If not see /* For an anulled-true delay slot insn for a delayed branch, should we only use conditional execution? */ -#define TARGET_AT_DBR_CONDEXEC (!TARGET_ARC700) +#define TARGET_AT_DBR_CONDEXEC (!TARGET_ARC700 && !TARGET_V2) #define TARGET_ARC600 (arc_cpu == PROCESSOR_ARC600) #define TARGET_ARC601 (arc_cpu == PROCESSOR_ARC601) #define TARGET_ARC700 (arc_cpu == PROCESSOR_ARC700) +#define TARGET_EM (arc_cpu == PROCESSOR_ARCEM) +#define TARGET_HS (arc_cpu == PROCESSOR_ARCHS) +#define TARGET_V2 \ + ((arc_cpu == PROCESSOR_ARCHS) || (arc_cpu == PROCESSOR_ARCEM)) /* Recast the cpu class to be the cpu attribute. */ #define arc_cpu_attr ((enum attr_cpu)arc_cpu) @@ -744,6 +759,7 @@ extern enum reg_class arc_regno_reg_class[]; ((unsigned) (((X) >> (SHIFT)) + 0x100) \ < 0x200 - ((unsigned) (OFFSET) >> (SHIFT))) #define SIGNED_INT12(X) ((unsigned) ((X) + 0x800) < 0x1000) +#define SIGNED_INT16(X) ((unsigned) ((X) + 0x8000) < 0x10000) #define LARGE_INT(X) \ (((X) < 0) \ ? (X) >= (-(HOST_WIDE_INT) 0x7fffffff - 1) \ @@ -1305,6 +1321,7 @@ do { \ #endif #define SET_ASM_OP "\t.set\t" +extern char rname29[], rname30[]; extern char rname56[], rname57[], rname58[], rname59[]; /* How to refer to registers in assembler output. This sequence is indexed by compiler's hard-register-number (see above). */ @@ -1312,7 +1329,7 @@ extern char rname56[], rname57[], rname58[], rname59[]; { "r0", "r1", "r2", "r3", "r4", "r5", "r6", "r7", \ "r8", "r9", "r10", "r11", "r12", "r13", "r14", "r15", \ "r16", "r17", "r18", "r19", "r20", "r21", "r22", "r23", \ - "r24", "r25", "gp", "fp", "sp", "ilink1", "ilink2", "blink", \ + "r24", "r25", "gp", "fp", "sp", rname29, rname30, "blink", \ "r32", "r33", "r34", "r35", "r36", "r37", "r38", "r39", \ "d1", "d1", "d2", "d2", "r44", "r45", "r46", "r47", \ "r48", "r49", "r50", "r51", "r52", "r53", "r54", "r55", \ @@ -1678,4 +1695,25 @@ enum #define SFUNC_CHECK_PREDICABLE \ (GET_CODE (PATTERN (insn)) != COND_EXEC || !flag_pic || !TARGET_MEDIUM_CALLS) +/* MPYW feature macro. Only valid for ARCHS and ARCEM cores. */ +#define TARGET_MPYW ((arc_mpy_option > 0) && TARGET_V2) +/* Full ARCv2 multiplication feature macro. */ +#define TARGET_MULTI ((arc_mpy_option > 1) && TARGET_V2) +/* General MPY feature macro. */ +#define TARGET_MPY ((TARGET_ARC700 && (!TARGET_NOMPY_SET)) || TARGET_MULTI) +/* ARC700 MPY feature macro. */ +#define TARGET_ARC700_MPY (TARGET_ARC700 && (!TARGET_NOMPY_SET)) +/* Any multiplication feature macro. */ +#define TARGET_ANY_MPY \ + (TARGET_MPY || TARGET_MUL64_SET || TARGET_MULMAC_32BY16_SET) + +/* ARC600 and ARC601 feature macro. */ +#define TARGET_ARC600_FAMILY (TARGET_ARC600 || TARGET_ARC601) +/* ARC600, ARC601 and ARC700 feature macro. */ +#define TARGET_ARCOMPACT_FAMILY \ + (TARGET_ARC600 || TARGET_ARC601 || TARGET_ARC700) +/* Loop count register can be read in very next instruction after has + been written to by an ordinary instruction. */ +#define TARGET_LP_WR_INTERLOCK (!TARGET_ARC600_FAMILY) + #endif /* GCC_ARC_H */ diff --git a/gcc/config/arc/arc.md b/gcc/config/arc/arc.md index e1da4d70085..1d070a30d82 100644 --- a/gcc/config/arc/arc.md +++ b/gcc/config/arc/arc.md @@ -84,6 +84,8 @@ ;; Include DFA scheduluers (include ("arc600.md")) (include ("arc700.md")) +(include ("arcEM.md")) +(include ("arcHS.md")) ;; Predicates @@ -124,6 +126,7 @@ (VUNSPEC_SR 26) ; blockage insn for writing to an auxiliary register (VUNSPEC_TRAP_S 27) ; blockage insn for trap_s generation (VUNSPEC_UNIMP_S 28) ; blockage insn for unimp_s generation + (VUNSPEC_NOP 29) ; volatile NOP (R0_REG 0) (R1_REG 1) @@ -165,7 +168,7 @@ simd_varith_with_acc, simd_vlogic, simd_vlogic_with_acc, simd_vcompare, simd_vpermute, simd_vpack, simd_vpack_with_acc, simd_valign, simd_valign_with_acc, simd_vcontrol, - simd_vspecial_3cycle, simd_vspecial_4cycle, simd_dma" + simd_vspecial_3cycle, simd_vspecial_4cycle, simd_dma, mul16_em, div_rem" (cond [(eq_attr "is_sfunc" "yes") (cond [(match_test "!TARGET_LONG_CALLS_SET && (!TARGET_MEDIUM_CALLS || GET_CODE (PATTERN (insn)) != COND_EXEC)") (const_string "call") (match_test "flag_pic") (const_string "sfunc")] @@ -188,7 +191,7 @@ ;; Attribute describing the processor -(define_attr "cpu" "none,ARC600,ARC700" +(define_attr "cpu" "none,ARC600,ARC700,ARCEM,ARCHS" (const (symbol_ref "arc_cpu_attr"))) ;; true for compact instructions (those with _s suffix) @@ -226,8 +229,21 @@ (symbol_ref "get_attr_length (NEXT_INSN (PREV_INSN (insn))) - get_attr_length (insn)"))) +; for ARCv2 we need to disable/enable different instruction alternatives +(define_attr "cpu_facility" "std,av1,av2" + (const_string "std")) -(define_attr "enabled" "no,yes" (const_string "yes")) +; We should consider all the instructions enabled until otherwise +(define_attr "enabled" "no,yes" + (cond [(and (eq_attr "cpu_facility" "av1") + (match_test "TARGET_V2")) + (const_string "no") + + (and (eq_attr "cpu_facility" "av2") + (not (match_test "TARGET_V2"))) + (const_string "no") + ] + (const_string "yes"))) (define_attr "predicable" "no,yes" (const_string "no")) ;; if 'predicable' were not so brain-dead, we would specify: @@ -580,7 +596,8 @@ stb%U0%V0 %1,%0" [(set_attr "type" "move,move,move,move,move,move,move,load,store,load,load,store,store") (set_attr "iscompact" "maybe,maybe,maybe,false,false,false,false,true,true,true,false,false,false") - (set_attr "predicable" "yes,no,yes,yes,no,yes,yes,no,no,no,no,no,no")]) + (set_attr "predicable" "yes,no,yes,yes,no,yes,yes,no,no,no,no,no,no") + (set_attr "cpu_facility" "*,*,av1,*,*,*,*,*,*,*,*,*,*")]) (define_expand "movhi" [(set (match_operand:HI 0 "move_dest_operand" "") @@ -607,15 +624,16 @@ mov%? %0,%1 mov%? %0,%S1%& mov%? %0,%S1 - ldw%? %0,%1%& - stw%? %1,%0%& - ldw%U1%V1 %0,%1 - stw%U0%V0 %1,%0 - stw%U0%V0 %1,%0 - stw%U0%V0 %S1,%0" + ld%_%? %0,%1%& + st%_%? %1,%0%& + ld%_%U1%V1 %0,%1 + st%_%U0%V0 %1,%0 + st%_%U0%V0 %1,%0 + st%_%U0%V0 %S1,%0" [(set_attr "type" "move,move,move,move,move,move,move,move,load,store,load,store,store,store") (set_attr "iscompact" "maybe,maybe,maybe,false,false,false,maybe_limm,false,true,true,false,false,false,false") - (set_attr "predicable" "yes,no,yes,yes,no,yes,yes,yes,no,no,no,no,no,no")]) + (set_attr "predicable" "yes,no,yes,yes,no,yes,yes,yes,no,no,no,no,no,no") + (set_attr "cpu_facility" "*,*,av1,*,*,*,*,*,*,*,*,*,*,*")]) (define_expand "movsi" [(set (match_operand:SI 0 "move_dest_operand" "") @@ -669,7 +687,8 @@ ; Use default length for iscompact to allow for COND_EXEC. But set length ; of Crr to 4. (set_attr "length" "*,*,*,4,4,4,4,8,8,*,8,*,*,*,*,*,*,*,*,8") - (set_attr "predicable" "yes,no,yes,yes,no,no,yes,no,no,yes,yes,no,no,no,no,no,no,no,no,no")]) + (set_attr "predicable" "yes,no,yes,yes,no,no,yes,no,no,yes,yes,no,no,no,no,no,no,no,no,no") + (set_attr "cpu_facility" "*,*,av1,*,*,*,*,*,*,*,*,*,*,*,*,*,*,*,*,*")]) ;; Sometimes generated by the epilogue code. We don't want to ;; recognize these addresses in general, because the limm is costly, @@ -698,7 +717,7 @@ (define_insn_and_split "*movsi_set_cc_insn" [(set (match_operand:CC_ZN 2 "cc_set_register" "") - (match_operator 3 "zn_compare_operator" + (match_operator:CC_ZN 3 "zn_compare_operator" [(match_operand:SI 1 "nonmemory_operand" "cI,cL,Cal") (const_int 0)])) (set (match_operand:SI 0 "register_operand" "=w,w,w") (match_dup 1))] @@ -715,7 +734,7 @@ (define_insn "unary_comparison" [(set (match_operand:CC_ZN 0 "cc_set_register" "") - (match_operator 3 "zn_compare_operator" + (match_operator:CC_ZN 3 "zn_compare_operator" [(match_operator:SI 2 "unary_operator" [(match_operand:SI 1 "register_operand" "c")]) (const_int 0)]))] @@ -779,7 +798,7 @@ (define_insn "*commutative_binary_comparison" [(set (match_operand:CC_ZN 0 "cc_set_register" "") - (match_operator 5 "zn_compare_operator" + (match_operator:CC_ZN 5 "zn_compare_operator" [(match_operator:SI 4 "commutative_operator" [(match_operand:SI 1 "register_operand" "%c,c,c") (match_operand:SI 2 "nonmemory_operand" "cL,I,?Cal")]) @@ -857,7 +876,7 @@ ; Make sure to use the W class to not touch LP_COUNT. (set (match_operand:SI 0 "register_operand" "=W,W,W") (match_dup 4))] - "TARGET_ARC700" + "!TARGET_ARC600_FAMILY" "%O4.f %0,%1,%2 ; mult commutative" [(set_attr "type" "compare,compare,compare") (set_attr "cond" "set_zn,set_zn,set_zn") @@ -881,7 +900,7 @@ (define_insn "*noncommutative_binary_comparison" [(set (match_operand:CC_ZN 0 "cc_set_register" "") - (match_operator 5 "zn_compare_operator" + (match_operator:CC_ZN 5 "zn_compare_operator" [(match_operator:SI 4 "noncommutative_operator" [(match_operand:SI 1 "register_operand" "c,c,c") (match_operand:SI 2 "nonmemory_operand" "cL,I,?Cal")]) @@ -1145,7 +1164,7 @@ (set (match_operand:SI 0 "dest_reg_operand" "=w,w") (plus:SI (match_dup 1) (match_dup 2)))] "" - "ldw.a%V4 %3,[%0,%S2]" + "ld%_.a%V4 %3,[%0,%S2]" [(set_attr "type" "load,load") (set_attr "length" "4,8")]) @@ -1157,7 +1176,7 @@ (set (match_operand:SI 0 "dest_reg_operand" "=r,r") (plus:SI (match_dup 1) (match_dup 2)))] "" - "ldw.a%V4 %3,[%0,%S2]" + "ld%_.a%V4 %3,[%0,%S2]" [(set_attr "type" "load,load") (set_attr "length" "4,8")]) @@ -1170,7 +1189,7 @@ (set (match_operand:SI 0 "dest_reg_operand" "=w,w") (plus:SI (match_dup 1) (match_dup 2)))] "" - "ldw.x.a%V4 %3,[%0,%S2]" + "ld%_.x.a%V4 %3,[%0,%S2]" [(set_attr "type" "load,load") (set_attr "length" "4,8")]) @@ -1182,7 +1201,7 @@ (set (match_operand:SI 0 "dest_reg_operand" "=w") (plus:SI (match_dup 1) (match_dup 2)))] "" - "stw.a%V4 %3,[%0,%2]" + "st%_.a%V4 %3,[%0,%2]" [(set_attr "type" "store") (set_attr "length" "4")]) @@ -1283,7 +1302,7 @@ && satisfies_constraint_Rcq (operands[0])) return "sub%?.ne %0,%0,%0"; /* ??? might be good for speed on ARC600 too, *if* properly scheduled. */ - if ((TARGET_ARC700 || optimize_size) + if ((optimize_size && (!TARGET_ARC600_FAMILY)) && rtx_equal_p (operands[1], constm1_rtx) && GET_CODE (operands[3]) == LTU) return "sbc.cs %0,%0,%0"; @@ -1435,13 +1454,13 @@ (zero_extend:SI (match_operand:HI 1 "nonvol_nonimm_operand" "0,q,0,c,Usd,Usd,m")))] "" "@ - extw%? %0,%1%& - extw%? %0,%1%& + ext%_%? %0,%1%& + ext%_%? %0,%1%& bmsk%? %0,%1,15 - extw %0,%1 - ldw%? %0,%1%& - ldw%U1 %0,%1 - ldw%U1%V1 %0,%1" + ext%_ %0,%1 + ld%_%? %0,%1%& + ld%_%U1 %0,%1 + ld%_%U1%V1 %0,%1" [(set_attr "type" "unary,unary,unary,unary,load,load,load") (set_attr "iscompact" "maybe,true,false,false,true,false,false") (set_attr "predicable" "no,no,yes,no,no,no,no")]) @@ -1498,9 +1517,9 @@ (sign_extend:SI (match_operand:HI 1 "nonvol_nonimm_operand" "Rcqq,c,m")))] "" "@ - sexw%? %0,%1%& - sexw %0,%1 - ldw.x%U1%V1 %0,%1" + sex%_%? %0,%1%& + sex%_ %0,%1 + ld%_.x%U1%V1 %0,%1" [(set_attr "type" "unary,unary,load") (set_attr "iscompact" "true,false,false")]) @@ -1604,7 +1623,88 @@ (set_attr "cond" "canuse,canuse,canuse,canuse,canuse,canuse,nocond,canuse,nocond,nocond,nocond,nocond,canuse_limm,canuse_limm,canuse,canuse,nocond") ]) -;; ARC700/ARC600 multiply +;; ARCv2 MPYW and MPYUW +(define_expand "mulhisi3" + [(set (match_operand:SI 0 "register_operand" "") + (mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" "")) + (sign_extend:SI (match_operand:HI 2 "nonmemory_operand" ""))))] + "TARGET_MPYW" + "{ + if (CONSTANT_P (operands[2])) + { + emit_insn (gen_mulhisi3_imm (operands[0], operands[1], operands[2])); + DONE; + } + }" +) + +(define_insn "mulhisi3_imm" + [(set (match_operand:SI 0 "register_operand" "=r,r,r, r, r") + (mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" "0,r,0, 0, r")) + (match_operand:HI 2 "short_const_int_operand" "L,L,I,C16,C16")))] + "TARGET_MPYW" + "mpyw%? %0,%1,%2" + [(set_attr "length" "4,4,4,8,8") + (set_attr "iscompact" "false") + (set_attr "type" "mul16_em") + (set_attr "predicable" "yes,no,no,yes,no") + (set_attr "cond" "canuse,nocond,nocond,canuse_limm,nocond") + ]) + +(define_insn "mulhisi3_reg" + [(set (match_operand:SI 0 "register_operand" "=Rcqq,r,r") + (mult:SI (sign_extend:SI (match_operand:HI 1 "register_operand" " 0,0,r")) + (sign_extend:SI (match_operand:HI 2 "nonmemory_operand" "Rcqq,r,r"))))] + "TARGET_MPYW" + "mpyw%? %0,%1,%2" + [(set_attr "length" "*,4,4") + (set_attr "iscompact" "maybe,false,false") + (set_attr "type" "mul16_em") + (set_attr "predicable" "yes,yes,no") + (set_attr "cond" "canuse,canuse,nocond") + ]) + +(define_expand "umulhisi3" + [(set (match_operand:SI 0 "register_operand" "") + (mult:SI (zero_extend:SI (match_operand:HI 1 "register_operand" "")) + (zero_extend:SI (match_operand:HI 2 "nonmemory_operand" ""))))] + "TARGET_MPYW" + "{ + if (CONSTANT_P (operands[2])) + { + emit_insn (gen_umulhisi3_imm (operands[0], operands[1], operands[2])); + DONE; + } + }" +) + +(define_insn "umulhisi3_imm" + [(set (match_operand:SI 0 "register_operand" "=r, r,r, r, r") + (mult:SI (zero_extend:SI (match_operand:HI 1 "register_operand" " 0, r,0, 0, r")) + (match_operand:HI 2 "short_const_int_operand" " L, L,I,C16,C16")))] + "TARGET_MPYW" + "mpyuw%? %0,%1,%2" + [(set_attr "length" "4,4,4,8,8") + (set_attr "iscompact" "false") + (set_attr "type" "mul16_em") + (set_attr "predicable" "yes,no,no,yes,no") + (set_attr "cond" "canuse,nocond,nocond,canuse_limm,nocond") + ]) + +(define_insn "umulhisi3_reg" + [(set (match_operand:SI 0 "register_operand" "=Rcqq, r, r") + (mult:SI (zero_extend:SI (match_operand:HI 1 "register_operand" " 0, 0, r")) + (zero_extend:SI (match_operand:HI 2 "register_operand" " Rcqq, r, r"))))] + "TARGET_MPYW" + "mpyuw%? %0,%1,%2" + [(set_attr "length" "*,4,4") + (set_attr "iscompact" "maybe,false,false") + (set_attr "type" "mul16_em") + (set_attr "predicable" "yes,yes,no") + (set_attr "cond" "canuse,canuse,nocond") + ]) + +;; ARC700/ARC600/V2 multiply ;; SI <- SI * SI (define_expand "mulsi3" @@ -1613,7 +1713,7 @@ (match_operand:SI 2 "nonmemory_operand" "")))] "" { - if (TARGET_ARC700 && !TARGET_NOMPY_SET) + if (TARGET_MPY) { if (!register_operand (operands[0], SImode)) { @@ -1743,8 +1843,7 @@ (clobber (reg:SI LP_START)) (clobber (reg:SI LP_END)) (clobber (reg:CC CC_REG))] - "!TARGET_MUL64_SET && !TARGET_MULMAC_32BY16_SET - && (!TARGET_ARC700 || TARGET_NOMPY_SET) + "!TARGET_ANY_MPY && SFUNC_CHECK_PREDICABLE" "*return arc_output_libcall (\"__mulsi3\");" [(set_attr "is_sfunc" "yes") @@ -1794,23 +1893,35 @@ [(set (match_operand:SI 0 "mpy_dest_reg_operand" "=Rcr,r,r,Rcr,r") (mult:SI (match_operand:SI 1 "register_operand" " 0,c,0,0,c") (match_operand:SI 2 "nonmemory_operand" "cL,cL,I,Cal,Cal")))] -"TARGET_ARC700 && !TARGET_NOMPY_SET" + "TARGET_ARC700_MPY" "mpyu%? %0,%1,%2" [(set_attr "length" "4,4,4,8,8") (set_attr "type" "umulti") (set_attr "predicable" "yes,no,no,yes,no") (set_attr "cond" "canuse,nocond,canuse_limm,canuse,nocond")]) +; ARCv2 has no penalties between mpy and mpyu. So, we use mpy because of its +; short variant. LP_COUNT constraints are still valid. +(define_insn "mulsi3_v2" + [(set (match_operand:SI 0 "mpy_dest_reg_operand" "=Rcqq,Rcr, r,r,Rcr, r") + (mult:SI (match_operand:SI 1 "register_operand" "%0, 0, c,0, 0, c") + (match_operand:SI 2 "nonmemory_operand" " Rcqq, cL,cL,I,Cal,Cal")))] + "TARGET_MULTI" + "mpy%? %0,%1,%2" + [(set_attr "length" "*,4,4,4,8,8") + (set_attr "iscompact" "maybe,false,false,false,false,false") + (set_attr "type" "umulti") + (set_attr "predicable" "no,yes,no,no,yes,no") + (set_attr "cond" "nocond,canuse,nocond,canuse_limm,canuse,nocond")]) + (define_expand "mulsidi3" [(set (match_operand:DI 0 "nonimmediate_operand" "") (mult:DI (sign_extend:DI(match_operand:SI 1 "register_operand" "")) (sign_extend:DI(match_operand:SI 2 "nonmemory_operand" ""))))] - "(TARGET_ARC700 && !TARGET_NOMPY_SET) - || TARGET_MUL64_SET - || TARGET_MULMAC_32BY16_SET" + "TARGET_ANY_MPY" " { - if (TARGET_ARC700 && !TARGET_NOMPY_SET) + if (TARGET_MPY) { operands[2] = force_reg (SImode, operands[2]); if (!register_operand (operands[0], DImode)) @@ -1892,7 +2003,7 @@ [(set (match_operand:DI 0 "register_operand" "=&r") (mult:DI (sign_extend:DI (match_operand:SI 1 "register_operand" "%c")) (sign_extend:DI (match_operand:SI 2 "extend_operand" "cL"))))] - "TARGET_ARC700 && !TARGET_NOMPY_SET" + "TARGET_MPY" "#" "&& reload_completed" [(const_int 0)] @@ -1902,7 +2013,7 @@ rtx l0 = simplify_gen_subreg (word_mode, operands[0], DImode, lo); rtx h0 = simplify_gen_subreg (word_mode, operands[0], DImode, hi); emit_insn (gen_mulsi3_highpart (h0, operands[1], operands[2])); - emit_insn (gen_mulsi3_700 (l0, operands[1], operands[2])); + emit_insn (gen_mulsi3 (l0, operands[1], operands[2])); DONE; } [(set_attr "type" "multi") @@ -1916,8 +2027,8 @@ (sign_extend:DI (match_operand:SI 1 "register_operand" "%0,c, 0,c")) (sign_extend:DI (match_operand:SI 2 "extend_operand" "c,c, i,i"))) (const_int 32))))] - "TARGET_ARC700 && !TARGET_NOMPY_SET" - "mpyh%? %0,%1,%2" + "TARGET_MPY" + "mpy%+%? %0,%1,%2" [(set_attr "length" "4,4,8,8") (set_attr "type" "multi") (set_attr "predicable" "yes,no,yes,no") @@ -1933,8 +2044,8 @@ (zero_extend:DI (match_operand:SI 1 "register_operand" "%0,c, 0,c")) (zero_extend:DI (match_operand:SI 2 "extend_operand" "c,c, i,i"))) (const_int 32))))] - "TARGET_ARC700 && !TARGET_NOMPY_SET" - "mpyhu%? %0,%1,%2" + "TARGET_MPY" + "mpy%+u%? %0,%1,%2" [(set_attr "length" "4,4,8,8") (set_attr "type" "multi") (set_attr "predicable" "yes,no,yes,no") @@ -1956,8 +2067,7 @@ (clobber (reg:DI MUL64_OUT_REG)) (clobber (reg:CC CC_REG))] "!TARGET_BIG_ENDIAN - && !TARGET_MUL64_SET && !TARGET_MULMAC_32BY16_SET - && (!TARGET_ARC700 || TARGET_NOMPY_SET) + && !TARGET_ANY_MPY && SFUNC_CHECK_PREDICABLE" "*return arc_output_libcall (\"__umulsi3_highpart\");" [(set_attr "is_sfunc" "yes") @@ -1977,8 +2087,7 @@ (clobber (reg:DI MUL64_OUT_REG)) (clobber (reg:CC CC_REG))] "TARGET_BIG_ENDIAN - && !TARGET_MUL64_SET && !TARGET_MULMAC_32BY16_SET - && (!TARGET_ARC700 || TARGET_NOMPY_SET) + && !TARGET_ANY_MPY && SFUNC_CHECK_PREDICABLE" "*return arc_output_libcall (\"__umulsi3_highpart\");" [(set_attr "is_sfunc" "yes") @@ -1995,8 +2104,8 @@ (zero_extend:DI (match_operand:SI 1 "register_operand" " 0, c, 0, 0, c")) (match_operand:DI 2 "immediate_usidi_operand" "L, L, I, Cal, Cal")) (const_int 32))))] - "TARGET_ARC700 && !TARGET_NOMPY_SET" - "mpyhu%? %0,%1,%2" + "TARGET_MPY" + "mpy%+u%? %0,%1,%2" [(set_attr "length" "4,4,4,8,8") (set_attr "type" "multi") (set_attr "predicable" "yes,no,no,yes,no") @@ -2010,12 +2119,12 @@ (zero_extend:DI (match_operand:SI 1 "register_operand" "")) (zero_extend:DI (match_operand:SI 2 "nonmemory_operand" ""))) (const_int 32))))] - "TARGET_ARC700 || (!TARGET_MUL64_SET && !TARGET_MULMAC_32BY16_SET)" + "!TARGET_MUL64_SET && !TARGET_MULMAC_32BY16_SET" " { rtx target = operands[0]; - if (!TARGET_ARC700 || TARGET_NOMPY_SET) + if (!TARGET_MPY) { emit_move_insn (gen_rtx_REG (SImode, 0), operands[1]); emit_move_insn (gen_rtx_REG (SImode, 1), operands[2]); @@ -2047,7 +2156,7 @@ (zero_extend:DI(match_operand:SI 2 "nonmemory_operand" ""))))] "" { - if (TARGET_ARC700 && !TARGET_NOMPY_SET) + if (TARGET_MPY) { operands[2] = force_reg (SImode, operands[2]); if (!register_operand (operands[0], DImode)) @@ -2141,7 +2250,7 @@ [(set (match_operand:DI 0 "dest_reg_operand" "=&r") (mult:DI (zero_extend:DI (match_operand:SI 1 "register_operand" "%c")) (zero_extend:DI (match_operand:SI 2 "extend_operand" "cL"))))] - "TARGET_ARC700 && !TARGET_NOMPY_SET" + "TARGET_MPY" "#" "reload_completed" [(const_int 0)] @@ -2151,7 +2260,7 @@ rtx l0 = operand_subword (operands[0], lo, 0, DImode); rtx h0 = operand_subword (operands[0], hi, 0, DImode); emit_insn (gen_umulsi3_highpart (h0, operands[1], operands[2])); - emit_insn (gen_mulsi3_700 (l0, operands[1], operands[2])); + emit_insn (gen_mulsi3 (l0, operands[1], operands[2])); DONE; } [(set_attr "type" "umulti") @@ -2166,8 +2275,7 @@ (clobber (reg:SI R12_REG)) (clobber (reg:DI MUL64_OUT_REG)) (clobber (reg:CC CC_REG))] - "!TARGET_MUL64_SET && !TARGET_MULMAC_32BY16_SET - && (!TARGET_ARC700 || TARGET_NOMPY_SET) + "!TARGET_ANY_MPY && SFUNC_CHECK_PREDICABLE" "*return arc_output_libcall (\"__umulsidi3\");" [(set_attr "is_sfunc" "yes") @@ -2183,8 +2291,7 @@ (clobber (reg:SI R12_REG)) (clobber (reg:DI MUL64_OUT_REG)) (clobber (reg:CC CC_REG))])] - "!TARGET_MUL64_SET && !TARGET_MULMAC_32BY16_SET - && (!TARGET_ARC700 || TARGET_NOMPY_SET) + "!TARGET_ANY_MPY && peep2_regno_dead_p (1, TARGET_BIG_ENDIAN ? R1_REG : R0_REG)" [(pc)] { @@ -2350,7 +2457,7 @@ adc %0,%1,%2" ; if we have a bad schedule after sched2, split. "reload_completed - && !optimize_size && TARGET_ARC700 + && !optimize_size && (!TARGET_ARC600_FAMILY) && arc_scheduling_not_expected () && arc_sets_cc_p (prev_nonnote_insn (insn)) /* If next comes a return or other insn that needs a delay slot, @@ -2564,7 +2671,7 @@ sbc %0,%1,%2" ; if we have a bad schedule after sched2, split. "reload_completed - && !optimize_size && TARGET_ARC700 + && !optimize_size && (!TARGET_ARC600_FAMILY) && arc_scheduling_not_expected () && arc_sets_cc_p (prev_nonnote_insn (insn)) /* If next comes a return or other insn that needs a delay slot, @@ -2802,7 +2909,7 @@ return \"bclr%? %0,%1,%M2%&\"; case 4: return (INTVAL (operands[2]) == 0xff - ? \"extb%? %0,%1%&\" : \"extw%? %0,%1%&\"); + ? \"extb%? %0,%1%&\" : \"ext%_%? %0,%1%&\"); case 9: case 14: return \"bic%? %0,%1,%n2-1\"; case 18: if (TARGET_BIG_ENDIAN) @@ -2813,11 +2920,11 @@ xop[1] = adjust_address (operands[1], QImode, INTVAL (operands[2]) == 0xff ? 3 : 2); output_asm_insn (INTVAL (operands[2]) == 0xff - ? \"ldb %0,%1\" : \"ldw %0,%1\", + ? \"ldb %0,%1\" : \"ld%_ %0,%1\", xop); return \"\"; } - return INTVAL (operands[2]) == 0xff ? \"ldb %0,%1\" : \"ldw %0,%1\"; + return INTVAL (operands[2]) == 0xff ? \"ldb %0,%1\" : \"ld%_ %0,%1\"; default: gcc_unreachable (); } @@ -3196,19 +3303,19 @@ ;; Next come the scc insns. (define_expand "cstoresi4" - [(set (reg:CC CC_REG) - (compare:CC (match_operand:SI 2 "nonmemory_operand" "") - (match_operand:SI 3 "nonmemory_operand" ""))) - (set (match_operand:SI 0 "dest_reg_operand" "") - (match_operator:SI 1 "ordered_comparison_operator" [(reg CC_REG) - (const_int 0)]))] + [(set (match_operand:SI 0 "dest_reg_operand" "") + (match_operator:SI 1 "ordered_comparison_operator" [(match_operand:SI 2 "nonmemory_operand" "") + (match_operand:SI 3 "nonmemory_operand" "")]))] "" { - gcc_assert (XEXP (operands[1], 0) == operands[2]); - gcc_assert (XEXP (operands[1], 1) == operands[3]); - operands[1] = gen_compare_reg (operands[1], SImode); - emit_insn (gen_scc_insn (operands[0], operands[1])); - DONE; + if (!TARGET_CODE_DENSITY) + { + gcc_assert (XEXP (operands[1], 0) == operands[2]); + gcc_assert (XEXP (operands[1], 1) == operands[3]); + operands[1] = gen_compare_reg (operands[1], SImode); + emit_insn (gen_scc_insn (operands[0], operands[1])); + DONE; + } }) (define_mode_iterator SDF [SF DF]) @@ -3590,8 +3697,8 @@ return \"ld.as %0,[%1,%2]%&\"; case HImode: if (ADDR_DIFF_VEC_FLAGS (diff_vec).offset_unsigned) - return \"ldw.as %0,[%1,%2]\"; - return \"ldw.x.as %0,[%1,%2]\"; + return \"ld%_.as %0,[%1,%2]\"; + return \"ld%_.x.as %0,[%1,%2]\"; case QImode: if (ADDR_DIFF_VEC_FLAGS (diff_vec).offset_unsigned) return \"ldb%? %0,[%1,%2]%&\"; @@ -3658,7 +3765,7 @@ 2 of these are for alignment, and are anticipated in the length of the ADDR_DIFF_VEC. */ if (unalign && !satisfies_constraint_Rcq (xop[0])) - s = \"add2 %2,pcl,%0\n\tld_s%2,[%2,12]\"; + s = \"add2 %2,pcl,%0\n\tld_s %2,[%2,12]\"; else if (unalign) s = \"add_s %2,%0,2\n\tld.as %2,[pcl,%2]\"; else @@ -3670,12 +3777,12 @@ { if (satisfies_constraint_Rcq (xop[0])) { - s = \"add_s %2,%0,%1\n\tldw.as %2,[pcl,%2]\"; + s = \"add_s %2,%0,%1\n\tld%_.as %2,[pcl,%2]\"; xop[1] = GEN_INT ((10 - unalign) / 2U); } else { - s = \"add1 %2,pcl,%0\n\tldw_s %2,[%2,%1]\"; + s = \"add1 %2,pcl,%0\n\tld%__s %2,[%2,%1]\"; xop[1] = GEN_INT (10 + unalign); } } @@ -3683,12 +3790,12 @@ { if (satisfies_constraint_Rcq (xop[0])) { - s = \"add_s %2,%0,%1\n\tldw.x.as %2,[pcl,%2]\"; + s = \"add_s %2,%0,%1\n\tld%_.x.as %2,[pcl,%2]\"; xop[1] = GEN_INT ((10 - unalign) / 2U); } else { - s = \"add1 %2,pcl,%0\n\tldw_s.x %2,[%2,%1]\"; + s = \"add1 %2,pcl,%0\n\tld%__s.x %2,[%2,%1]\"; xop[1] = GEN_INT (10 + unalign); } } @@ -3886,6 +3993,14 @@ (set_attr "cond" "canuse") (set_attr "length" "2")]) +(define_insn "nopv" + [(unspec_volatile [(const_int 0)] VUNSPEC_NOP)] + "" + "nop%?" + [(set_attr "type" "misc") + (set_attr "iscompact" "true") + (set_attr "length" "2")]) + ;; Special pattern to flush the icache. ;; ??? Not sure what to do here. Some ARC's are known to support this. @@ -3985,7 +4100,7 @@ (set (match_operand:SI 4 "register_operand" "") (mult:SI (match_operand:SI 2 "register_operand") (match_operand:SI 3 "nonmemory_operand" "")))] - "TARGET_ARC700 && !TARGET_NOMPY_SET + "TARGET_ARC700_MPY && (rtx_equal_p (operands[0], operands[2]) || rtx_equal_p (operands[0], operands[3])) && peep2_regno_dead_p (0, CC_REG) @@ -4015,7 +4130,7 @@ (set (match_operand:SI 4 "register_operand" "") (mult:SI (match_operand:SI 2 "register_operand") (match_operand:SI 3 "nonmemory_operand" "")))] - "TARGET_ARC700 && !TARGET_NOMPY_SET + "TARGET_ARC700_MPY && (rtx_equal_p (operands[0], operands[2]) || rtx_equal_p (operands[0], operands[3])) && peep2_regno_dead_p (2, CC_REG)" @@ -4068,8 +4183,8 @@ (clrsb:HI (match_operand:HI 1 "general_operand" "cL,Cal"))))] "TARGET_NORM" "@ - normw \t%0, %1 - normw \t%0, %S1" + norm%_ \t%0, %1 + norm%_ \t%0, %S1" [(set_attr "length" "4,8") (set_attr "type" "two_cycle_core,two_cycle_core")]) @@ -4479,6 +4594,11 @@ = gen_rtx_REG (Pmode, arc_return_address_regs[arc_compute_function_type (cfun)]); + if (arc_compute_function_type (cfun) == ARC_FUNCTION_ILINK1 + && TARGET_V2) + { + return \"rtie\"; + } if (TARGET_PAD_RETURN) arc_pad_return (); output_asm_insn (\"j%!%* [%0]%&\", ®); @@ -4487,8 +4607,13 @@ [(set_attr "type" "return") ; predicable won't help here since the canonical rtl looks different ; for branches. - (set_attr "cond" "canuse") - (set (attr "iscompact") + (set (attr "cond") + (cond [(and (eq (symbol_ref "arc_compute_function_type (cfun)") + (symbol_ref "ARC_FUNCTION_ILINK1")) + (match_test "TARGET_V2")) + (const_string "nocond")] + (const_string "canuse"))) + (set (attr "iscompact") (cond [(eq (symbol_ref "arc_compute_function_type (cfun)") (symbol_ref "ARC_FUNCTION_NORMAL")) (const_string "maybe")] @@ -4504,7 +4629,9 @@ (if_then_else (match_operator 0 "proper_comparison_operator" [(reg CC_REG) (const_int 0)]) (simple_return) (pc)))] - "reload_completed" + "reload_completed + && !(TARGET_V2 + && arc_compute_function_type (cfun) == ARC_FUNCTION_ILINK1)" { rtx xop[2]; xop[0] = operands[0]; @@ -4909,7 +5036,7 @@ (define_expand "doloop_end" [(use (match_operand 0 "register_operand" "")) (use (label_ref (match_operand 1 "" "")))] - "TARGET_ARC600 || TARGET_ARC700" + "!TARGET_ARC601" { /* We could do smaller bivs with biv widening, and wider bivs by having a high-word counter in an outer loop - but punt on this for now. */ @@ -5158,6 +5285,247 @@ ;; this would not work right for -0. OTOH optabs.c has already code ;; to synthesyze negate by flipping the sign bit. +;;V2 instructions +(define_insn "bswapsi2" + [(set (match_operand:SI 0 "register_operand" "= r,r") + (bswap:SI (match_operand:SI 1 "nonmemory_operand" "rL,Cal")))] + "TARGET_V2 && TARGET_SWAP" + "swape %0, %1" + [(set_attr "length" "4,8") + (set_attr "type" "two_cycle_core")]) + +(define_expand "prefetch" + [(prefetch (match_operand:SI 0 "address_operand" "") + (match_operand:SI 1 "const_int_operand" "") + (match_operand:SI 2 "const_int_operand" ""))] + "TARGET_HS" + "") + +(define_insn "prefetch_1" + [(prefetch (match_operand:SI 0 "register_operand" "r") + (match_operand:SI 1 "const_int_operand" "n") + (match_operand:SI 2 "const_int_operand" "n"))] + "TARGET_HS" + { + if (INTVAL (operands[1])) + return "prefetchw [%0]"; + else + return "prefetch [%0]"; + } + [(set_attr "type" "load") + (set_attr "length" "4")]) + +(define_insn "prefetch_2" + [(prefetch (plus:SI (match_operand:SI 0 "register_operand" "r,r,r") + (match_operand:SI 1 "nonmemory_operand" "r,Cm2,Cal")) + (match_operand:SI 2 "const_int_operand" "n,n,n") + (match_operand:SI 3 "const_int_operand" "n,n,n"))] + "TARGET_HS" + { + if (INTVAL (operands[2])) + return "prefetchw [%0, %1]"; + else + return "prefetch [%0, %1]"; + } + [(set_attr "type" "load") + (set_attr "length" "4,4,8")]) + +(define_insn "prefetch_3" + [(prefetch (match_operand:SI 0 "address_operand" "p") + (match_operand:SI 1 "const_int_operand" "n") + (match_operand:SI 2 "const_int_operand" "n"))] + "TARGET_HS" + { + operands[0] = gen_rtx_MEM (SImode, operands[0]); + if (INTVAL (operands[1])) + return "prefetchw%U0 %0"; + else + return "prefetch%U0 %0"; + } + [(set_attr "type" "load") + (set_attr "length" "8")]) + +(define_insn "divsi3" + [(set (match_operand:SI 0 "register_operand" "=r,r, r,r,r,r, r, r") + (div:SI (match_operand:SI 1 "nonmemory_operand" "0,r,Cal,0,r,0, 0, r") + (match_operand:SI 2 "nonmemory_operand" "r,r, r,L,L,I,Cal,Cal")))] + "TARGET_DIVREM" + "div%? %0, %1, %2" + [(set_attr "length" "4,4,8,4,4,4,8,8") + (set_attr "iscompact" "false") + (set_attr "type" "div_rem") + (set_attr "predicable" "yes,no,no,yes,no,no,yes,no") + (set_attr "cond" "canuse,nocond,nocond,canuse,nocond,nocond,canuse,nocond") + ]) + +(define_insn "udivsi3" + [(set (match_operand:SI 0 "register_operand" "=r,r, r,r,r,r, r, r") + (udiv:SI (match_operand:SI 1 "nonmemory_operand" "0,r,Cal,0,r,0, 0, r") + (match_operand:SI 2 "nonmemory_operand" "r,r, r,L,L,I,Cal,Cal")))] + "TARGET_DIVREM" + "divu%? %0, %1, %2" + [(set_attr "length" "4,4,8,4,4,4,8,8") + (set_attr "iscompact" "false") + (set_attr "type" "div_rem") + (set_attr "predicable" "yes,no,no,yes,no,no,yes,no") + (set_attr "cond" "canuse,nocond,nocond,canuse,nocond,nocond,canuse,nocond") + ]) + +(define_insn "modsi3" + [(set (match_operand:SI 0 "register_operand" "=r,r, r,r,r,r, r, r") + (mod:SI (match_operand:SI 1 "nonmemory_operand" "0,r,Cal,0,r,0, 0, r") + (match_operand:SI 2 "nonmemory_operand" "r,r, r,L,L,I,Cal,Cal")))] + "TARGET_DIVREM" + "rem%? %0, %1, %2" + [(set_attr "length" "4,4,8,4,4,4,8,8") + (set_attr "iscompact" "false") + (set_attr "type" "div_rem") + (set_attr "predicable" "yes,no,no,yes,no,no,yes,no") + (set_attr "cond" "canuse,nocond,nocond,canuse,nocond,nocond,canuse,nocond") + ]) + +(define_insn "umodsi3" + [(set (match_operand:SI 0 "register_operand" "=r,r, r,r,r,r, r, r") + (umod:SI (match_operand:SI 1 "nonmemory_operand" "0,r,Cal,0,r,0, 0, r") + (match_operand:SI 2 "nonmemory_operand" "r,r, r,L,L,I,Cal,Cal")))] + "TARGET_DIVREM" + "remu%? %0, %1, %2" + [(set_attr "length" "4,4,8,4,4,4,8,8") + (set_attr "iscompact" "false") + (set_attr "type" "div_rem") + (set_attr "predicable" "yes,no,no,yes,no,no,yes,no") + (set_attr "cond" "canuse,nocond,nocond,canuse,nocond,nocond,canuse,nocond") + ]) + +;; SETcc instructions +(define_code_iterator arcCC_cond [eq ne gt lt ge le]) + +(define_insn "arcset" + [(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r,r,r") + (arcCC_cond:SI (match_operand:SI 1 "nonmemory_operand" "0,r,0,r,0,0,r") + (match_operand:SI 2 "nonmemory_operand" "r,r,L,L,I,n,n")))] + "TARGET_V2 && TARGET_CODE_DENSITY" + "set%? %0, %1, %2" + [(set_attr "length" "4,4,4,4,4,8,8") + (set_attr "iscompact" "false") + (set_attr "type" "compare") + (set_attr "predicable" "yes,no,yes,no,no,yes,no") + (set_attr "cond" "canuse,nocond,canuse,nocond,nocond,canuse,nocond") + ]) + +(define_insn "arcsetltu" + [(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r, r, r") + (ltu:SI (match_operand:SI 1 "nonmemory_operand" "0,r,0,r,0, 0, r") + (match_operand:SI 2 "nonmemory_operand" "r,r,L,L,I, n, n")))] + "TARGET_V2 && TARGET_CODE_DENSITY" + "setlo%? %0, %1, %2" + [(set_attr "length" "4,4,4,4,4,8,8") + (set_attr "iscompact" "false") + (set_attr "type" "compare") + (set_attr "predicable" "yes,no,yes,no,no,yes,no") + (set_attr "cond" "canuse,nocond,canuse,nocond,nocond,canuse,nocond") + ]) + +(define_insn "arcsetgeu" + [(set (match_operand:SI 0 "register_operand" "=r,r,r,r,r, r, r") + (geu:SI (match_operand:SI 1 "nonmemory_operand" "0,r,0,r,0, 0, r") + (match_operand:SI 2 "nonmemory_operand" "r,r,L,L,I, n, n")))] + "TARGET_V2 && TARGET_CODE_DENSITY" + "seths%? %0, %1, %2" + [(set_attr "length" "4,4,4,4,4,8,8") + (set_attr "iscompact" "false") + (set_attr "type" "compare") + (set_attr "predicable" "yes,no,yes,no,no,yes,no") + (set_attr "cond" "canuse,nocond,canuse,nocond,nocond,canuse,nocond") + ]) + +;; Special cases of SETCC +(define_insn_and_split "arcsethi" + [(set (match_operand:SI 0 "register_operand" "=r,r, r,r") + (gtu:SI (match_operand:SI 1 "nonmemory_operand" "r,r, r,r") + (match_operand:SI 2 "nonmemory_operand" "0,r,C62,n")))] + "TARGET_V2 && TARGET_CODE_DENSITY" + "setlo%? %0, %2, %1" + "reload_completed + && CONST_INT_P (operands[2]) + && satisfies_constraint_C62 (operands[2])" + [(const_int 0)] + "{ + /* sethi a,b,u6 => seths a,b,u6 + 1. */ + operands[2] = GEN_INT (INTVAL (operands[2]) + 1); + emit_insn (gen_arcsetgeu (operands[0], operands[1], operands[2])); + DONE; + }" + [(set_attr "length" "4,4,4,8") + (set_attr "iscompact" "false") + (set_attr "type" "compare") + (set_attr "predicable" "yes,no,no,no") + (set_attr "cond" "canuse,nocond,nocond,nocond")] +) + +(define_insn_and_split "arcsetls" + [(set (match_operand:SI 0 "register_operand" "=r,r, r,r") + (leu:SI (match_operand:SI 1 "nonmemory_operand" "r,r, r,r") + (match_operand:SI 2 "nonmemory_operand" "0,r,C62,n")))] + "TARGET_V2 && TARGET_CODE_DENSITY" + "seths%? %0, %2, %1" + "reload_completed + && CONST_INT_P (operands[2]) + && satisfies_constraint_C62 (operands[2])" + [(const_int 0)] + "{ + /* setls a,b,u6 => setlo a,b,u6 + 1. */ + operands[2] = GEN_INT (INTVAL (operands[2]) + 1); + emit_insn (gen_arcsetltu (operands[0], operands[1], operands[2])); + DONE; + }" + [(set_attr "length" "4,4,4,8") + (set_attr "iscompact" "false") + (set_attr "type" "compare") + (set_attr "predicable" "yes,no,no,no") + (set_attr "cond" "canuse,nocond,nocond,nocond")] +) + +; Any mode that needs to be solved by secondary reload +(define_mode_iterator SRI [QI HI]) + +(define_expand "reload__load" + [(parallel [(match_operand:SRI 0 "register_operand" "=r") + (match_operand:SRI 1 "memory_operand" "m") + (match_operand:SI 2 "register_operand" "=&r")])] + "" +{ + arc_secondary_reload_conv (operands[0], operands[1], operands[2], false); + DONE; +}) + +(define_expand "reload__store" + [(parallel [(match_operand:SRI 0 "memory_operand" "=m") + (match_operand:SRI 1 "register_operand" "r") + (match_operand:SI 2 "register_operand" "=&r")])] + "" +{ + arc_secondary_reload_conv (operands[1], operands[0], operands[2], true); + DONE; +}) + + +(define_insn "extzvsi" + [(set (match_operand:SI 0 "register_operand" "=r , r , r, r, r") + (zero_extract:SI (match_operand:SI 1 "register_operand" "0 , r , 0, 0, r") + (match_operand:SI 2 "const_int_operand" "C3p, C3p, i, i, i") + (match_operand:SI 3 "const_int_operand" "i , i , i, i, i")))] + "TARGET_HS && TARGET_BARREL_SHIFTER" + { + int assemble_op2 = (((INTVAL (operands[2]) - 1) & 0x1f) << 5) | (INTVAL (operands[3]) & 0x1f); + operands[2] = GEN_INT (assemble_op2); + return "xbfu%? %0,%1,%2"; + } + [(set_attr "type" "shift") + (set_attr "iscompact" "false") + (set_attr "length" "4,4,4,8,8") + (set_attr "predicable" "yes,no,no,yes,no") + (set_attr "cond" "canuse,nocond,nocond,canuse,nocond")]) ;; include the arc-FPX instructions (include "fpx.md") diff --git a/gcc/config/arc/arc.opt b/gcc/config/arc/arc.opt index 29e89f93d15..0c10c67c4e7 100644 --- a/gcc/config/arc/arc.opt +++ b/gcc/config/arc/arc.opt @@ -53,6 +53,18 @@ mARC700 Target Report Same as -mA7. +mmpy-option= +Target RejectNegative Joined UInteger Var(arc_mpy_option) Init(2) +-mmpy-option={0,1,2,3,4,5,6,7,8,9} Compile ARCv2 code with a multiplier design option. Option 2 is default on. + +mdiv-rem +Target Report Mask(DIVREM) +Enable DIV-REM instructions for ARCv2 + +mcode-density +Target Report Mask(CODE_DENSITY) +Enable code density instructions for ARCv2 + mmixed-code Target Report Mask(MIXED_CODE_SET) Tweak register allocation to help 16-bit instruction generation. @@ -161,12 +173,33 @@ Name(processor_type) Type(enum processor_type) EnumValue Enum(processor_type) String(ARC600) Value(PROCESSOR_ARC600) +EnumValue +Enum(processor_type) String(arc600) Value(PROCESSOR_ARC600) + EnumValue Enum(processor_type) String(ARC601) Value(PROCESSOR_ARC601) +EnumValue +Enum(processor_type) String(arc601) Value(PROCESSOR_ARC601) + EnumValue Enum(processor_type) String(ARC700) Value(PROCESSOR_ARC700) +EnumValue +Enum(processor_type) String(arc700) Value(PROCESSOR_ARC700) + +EnumValue +Enum(processor_type) String(ARCEM) Value(PROCESSOR_ARCEM) + +EnumValue +Enum(processor_type) String(arcem) Value(PROCESSOR_ARCEM) + +EnumValue +Enum(processor_type) String(ARCHS) Value(PROCESSOR_ARCHS) + +EnumValue +Enum(processor_type) String(archs) Value(PROCESSOR_ARCHS) + msize-level= Target RejectNegative Joined UInteger Var(arc_size_opt_level) Init(-1) size optimization level: 0:none 1:opportunistic 2: regalloc 3:drop align, -Os. diff --git a/gcc/config/arc/arcEM.md b/gcc/config/arc/arcEM.md new file mode 100644 index 00000000000..a72d2504e52 --- /dev/null +++ b/gcc/config/arc/arcEM.md @@ -0,0 +1,93 @@ +;; DFA scheduling description of the Synopsys DesignWare ARC EM cpu +;; for GNU C compiler +;; Copyright (C) 2007-2015 Free Software Foundation, Inc. +;; Contributor: Claudiu Zissulescu + +;; This file is part of GCC. + +;; GCC is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 3, or (at your option) +;; any later version. + +;; GCC is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. + +;; You should have received a copy of the GNU General Public License +;; along with GCC; see the file COPYING3. If not see +;; . + +(define_automaton "ARCEM") + +(define_cpu_unit "em_issue, ld_st, mul_em, divrem_em" "ARCEM") + +(define_insn_reservation "em_data_load" 2 + (and (match_test "TARGET_EM") + (eq_attr "type" "load")) + "em_issue+ld_st,nothing") + +(define_insn_reservation "em_data_store" 1 + (and (match_test "TARGET_EM") + (eq_attr "type" "store")) + "em_issue+ld_st") + +;; Multipliers options +(define_insn_reservation "mul_em_mpyw_1" 1 + (and (match_test "TARGET_EM") + (match_test "arc_mpy_option > 0") + (match_test "arc_mpy_option <= 2") + (eq_attr "type" "mul16_em")) + "em_issue+mul_em") + +(define_insn_reservation "mul_em_mpyw_2" 2 + (and (match_test "TARGET_EM") + (match_test "arc_mpy_option > 2") + (match_test "arc_mpy_option <= 5") + (eq_attr "type" "mul16_em")) + "em_issue+mul_em, nothing") + +(define_insn_reservation "mul_em_mpyw_4" 4 + (and (match_test "TARGET_EM") + (match_test "arc_mpy_option == 6") + (eq_attr "type" "mul16_em")) + "em_issue+mul_em, mul_em*3") + +(define_insn_reservation "mul_em_multi_wlh1" 1 + (and (match_test "TARGET_EM") + (match_test "arc_mpy_option == 2") + (eq_attr "type" "multi,umulti")) + "em_issue+mul_em") + +(define_insn_reservation "mul_em_multi_wlh2" 2 + (and (match_test "TARGET_EM") + (match_test "arc_mpy_option == 3") + (eq_attr "type" "multi,umulti")) + "em_issue+mul_em, nothing") + +(define_insn_reservation "mul_em_multi_wlh3" 3 + (and (match_test "TARGET_EM") + (match_test "arc_mpy_option == 4") + (eq_attr "type" "multi,umulti")) + "em_issue+mul_em, mul_em*2") + +;; FIXME! Make the difference between MPY and MPYM for WLH4 +(define_insn_reservation "mul_em_multi_wlh4" 4 + (and (match_test "TARGET_EM") + (match_test "arc_mpy_option == 5") + (eq_attr "type" "multi,umulti")) + "em_issue+mul_em, mul_em*4") + +(define_insn_reservation "mul_em_multi_wlh5" 9 + (and (match_test "TARGET_EM") + (match_test "arc_mpy_option == 6") + (eq_attr "type" "multi,umulti")) + "em_issue+mul_em, mul_em*8") + +;; Radix-4 divider timing +(define_insn_reservation "em_divrem" 3 + (and (match_test "TARGET_EM") + (match_test "TARGET_DIVREM") + (eq_attr "type" "div_rem")) + "em_issue+mul_em+divrem_em, (mul_em+divrem_em)*2") diff --git a/gcc/config/arc/arcHS.md b/gcc/config/arc/arcHS.md new file mode 100644 index 00000000000..06937445a47 --- /dev/null +++ b/gcc/config/arc/arcHS.md @@ -0,0 +1,76 @@ +;; DFA scheduling description of the Synopsys DesignWare ARC HS cpu +;; for GNU C compiler +;; Copyright (C) 2007-2015 Free Software Foundation, Inc. +;; Contributor: Claudiu Zissulescu + +;; This file is part of GCC. + +;; GCC is free software; you can redistribute it and/or modify +;; it under the terms of the GNU General Public License as published by +;; the Free Software Foundation; either version 3, or (at your option) +;; any later version. + +;; GCC is distributed in the hope that it will be useful, +;; but WITHOUT ANY WARRANTY; without even the implied warranty of +;; MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +;; GNU General Public License for more details. + +;; You should have received a copy of the GNU General Public License +;; along with GCC; see the file COPYING3. If not see +;; . + +(define_automaton "ARCHS") + +(define_cpu_unit "hs_issue, hs_ld_st, divrem_hs, mul_hs, x1, x2" "ARCHS") + +(define_insn_reservation "hs_data_load" 4 + (and (match_test "TARGET_HS") + (eq_attr "type" "load")) + "hs_issue+hs_ld_st,hs_ld_st,nothing*2") + +(define_insn_reservation "hs_data_store" 1 + (and (match_test "TARGET_HS") + (eq_attr "type" "store")) + "hs_issue+hs_ld_st") + +(define_insn_reservation "hs_alu0" 2 + (and (match_test "TARGET_HS") + (eq_attr "type" "cc_arith, two_cycle_core, shift, lr, sr")) + "hs_issue+x1,x2") + +(define_insn_reservation "hs_alu1" 4 + (and (match_test "TARGET_HS") + (eq_attr "type" "move, cmove, unary, binary, compare, misc")) + "hs_issue+x1, nothing*3") + +(define_insn_reservation "hs_divrem" 13 + (and (match_test "TARGET_HS") + (match_test "TARGET_DIVREM") + (eq_attr "type" "div_rem")) + "hs_issue+divrem_hs, (divrem_hs)*12") + +(define_insn_reservation "hs_mul" 3 + (and (match_test "TARGET_HS") + (eq_attr "type" "mul16_em, multi, umulti")) + "hs_issue+mul_hs, nothing*3") + +;; BYPASS EALU -> +(define_bypass 1 "hs_alu0" "hs_divrem") +(define_bypass 1 "hs_alu0" "hs_mul") + +;; BYPASS BALU -> +(define_bypass 1 "hs_alu1" "hs_alu1") +(define_bypass 1 "hs_alu1" "hs_data_store" "store_data_bypass_p") + +;; BYPASS LD -> +(define_bypass 1 "hs_data_load" "hs_alu1") +(define_bypass 3 "hs_data_load" "hs_divrem") +(define_bypass 3 "hs_data_load" "hs_data_load") +(define_bypass 3 "hs_data_load" "hs_mul") +(define_bypass 1 "hs_data_load" "hs_data_store" "store_data_bypass_p") + +;; BYPASS MPY -> +;;(define_bypass 3 "hs_mul" "hs_mul") +(define_bypass 1 "hs_mul" "hs_alu1") +(define_bypass 3 "hs_mul" "hs_divrem") +(define_bypass 1 "hs_mul" "hs_data_store" "store_data_bypass_p") diff --git a/gcc/config/arc/constraints.md b/gcc/config/arc/constraints.md index 3d0db360557..65ea44a9f13 100644 --- a/gcc/config/arc/constraints.md +++ b/gcc/config/arc/constraints.md @@ -127,6 +127,12 @@ (and (match_code "const_int") (match_test "UNSIGNED_INT6 (-ival)"))) +(define_constraint "C16" + "@internal + A 16-bit signed integer constant" + (and (match_code "const_int") + (match_test "SIGNED_INT16 (ival)"))) + (define_constraint "M" "@internal A 5-bit unsigned integer constant" @@ -212,6 +218,12 @@ (and (match_code "const_int") (match_test "ival && IS_POWEROF2_P (ival + 1)"))) +(define_constraint "C3p" + "@internal + constant int used to select xbfu a,b,u6 instruction. The values accepted are 1 and 2." + (and (match_code "const_int") + (match_test "((ival == 1) || (ival == 2))"))) + (define_constraint "Ccp" "@internal constant such that ~x (one's Complement) is a power of two" @@ -397,3 +409,15 @@ Integer constant zero" (and (match_code "const_int") (match_test "IS_ZERO (ival)"))) + +(define_constraint "Cm2" + "@internal + A signed 9-bit integer constant." + (and (match_code "const_int") + (match_test "(ival >= -256) && (ival <=255)"))) + +(define_constraint "C62" + "@internal + An unsigned 6-bit integer constant, up to 62." + (and (match_code "const_int") + (match_test "UNSIGNED_INT6 (ival - 1)"))) diff --git a/gcc/config/arc/predicates.md b/gcc/config/arc/predicates.md index d72f097eb71..43f9474c691 100644 --- a/gcc/config/arc/predicates.md +++ b/gcc/config/arc/predicates.md @@ -664,7 +664,7 @@ (match_operand 0 "shiftr4_operator"))) (define_predicate "mult_operator" - (and (match_code "mult") (match_test "TARGET_ARC700 && !TARGET_NOMPY_SET")) + (and (match_code "mult") (match_test "TARGET_MPY")) ) (define_predicate "commutative_operator" @@ -809,3 +809,7 @@ (match_test "INTVAL (op) >= 0") (and (match_test "const_double_operand (op, mode)") (match_test "CONST_DOUBLE_HIGH (op) == 0")))) + +(define_predicate "short_const_int_operand" + (and (match_operand 0 "const_int_operand") + (match_test "satisfies_constraint_C16 (op)"))) diff --git a/gcc/config/arc/t-arc-newlib b/gcc/config/arc/t-arc-newlib index 8823805b8aa..ea43a52cdc0 100644 --- a/gcc/config/arc/t-arc-newlib +++ b/gcc/config/arc/t-arc-newlib @@ -17,8 +17,8 @@ # with GCC; see the file COPYING3. If not see # . -MULTILIB_OPTIONS=mcpu=ARC600/mcpu=ARC601 mmul64/mmul32x16 mnorm -MULTILIB_DIRNAMES=arc600 arc601 mul64 mul32x16 norm +MULTILIB_OPTIONS=mcpu=ARC600/mcpu=ARC601/mcpu=ARC700/mcpu=ARCEM/mcpu=ARCHS mmul64/mmul32x16 mnorm +MULTILIB_DIRNAMES=arc600 arc601 arc700 em hs mul64 mul32x16 norm # # Aliases: MULTILIB_MATCHES = mcpu?ARC600=mcpu?arc600 @@ -26,10 +26,21 @@ MULTILIB_MATCHES += mcpu?ARC600=mARC600 MULTILIB_MATCHES += mcpu?ARC600=mA6 MULTILIB_MATCHES += mcpu?ARC600=mno-mpy MULTILIB_MATCHES += mcpu?ARC601=mcpu?arc601 +MULTILIB_MATCHES += mcpu?ARC700=mA7 +MULTILIB_MATCHES += mcpu?ARC700=mARC700 +MULTILIB_MATCHES += mcpu?ARC700=mcpu?arc700 +MULTILIB_MATCHES += mcpu?ARCEM=mcpu?arcem +MULTILIB_MATCHES += mcpu?ARCHS=mcpu?archs MULTILIB_MATCHES += EL=mlittle-endian MULTILIB_MATCHES += EB=mbig-endian # # These don't make sense for the ARC700 default target: -MULTILIB_EXCEPTIONS=mmul64* mmul32x16* mnorm* +MULTILIB_EXCEPTIONS=mmul64* mmul32x16* norm* # And neither of the -mmul* options make sense without -mnorm: MULTILIB_EXCLUSIONS=mARC600/mmul64/!mnorm mcpu=ARC601/mmul64/!mnorm mARC600/mmul32x16/!mnorm +# Exclusions for ARC700 +MULTILIB_EXCEPTIONS += mcpu=ARC700/mnorm* mcpu=ARC700/mmul64* mcpu=ARC700/mmul32x16* +# Exclusions for ARCv2EM +MULTILIB_EXCEPTIONS += mcpu=ARCEM/mmul64* mcpu=ARCEM/mmul32x16* +# Exclusions for ARCv2HS +MULTILIB_EXCEPTIONS += mcpu=ARCHS/mmul64* mcpu=ARCHS/mmul32x16* mcpu=ARCHS/mnorm* diff --git a/gcc/doc/invoke.texi b/gcc/doc/invoke.texi index 213a9d0c604..fb908b3a2bc 100644 --- a/gcc/doc/invoke.texi +++ b/gcc/doc/invoke.texi @@ -549,7 +549,9 @@ Objective-C and Objective-C++ Dialects}. -mexpand-adddi -mindexed-loads -mlra -mlra-priority-none @gol -mlra-priority-compact mlra-priority-noncompact -mno-millicode @gol -mmixed-code -mq-class -mRcq -mRcw -msize-level=@var{level} @gol --mtune=@var{cpu} -mmultcost=@var{num} -munalign-prob-threshold=@var{probability}} +-mtune=@var{cpu} -mmultcost=@var{num} @gol +-munalign-prob-threshold=@var{probability} -mmpy-option=@var{multo} @gol +-mdiv-rem -mcode-density} @emph{ARM Options} @gccoptlist{-mapcs-frame -mno-apcs-frame @gol @@ -12841,7 +12843,7 @@ is being compiled: @item -mbarrel-shifter @opindex mbarrel-shifter Generate instructions supported by barrel shifter. This is the default -unless @option{-mcpu=ARC601} is in effect. +unless @option{-mcpu=ARC601} or @samp{-mcpu=ARCEM} is in effect. @item -mcpu=@var{cpu} @opindex mcpu @@ -12854,17 +12856,28 @@ values for @var{cpu} are @opindex mA6 @opindex mARC600 @item ARC600 +@item arc600 Compile for ARC600. Aliases: @option{-mA6}, @option{-mARC600}. @item ARC601 +@item arc601 @opindex mARC601 Compile for ARC601. Alias: @option{-mARC601}. @item ARC700 +@item arc700 @opindex mA7 @opindex mARC700 Compile for ARC700. Aliases: @option{-mA7}, @option{-mARC700}. This is the default when configured with @option{--with-cpu=arc700}@. + +@item ARCEM +@item arcem +Compile for ARC EM. + +@item ARCHS +@item archs +Compile for ARC HS. @end table @item -mdpfp @@ -12935,6 +12948,62 @@ can overridden by FPX options; @samp{mspfp}, @samp{mspfp-compact}, or @opindex mswap Generate swap instructions. +@item -mdiv-rem +@opindex mdiv-rem +Enable DIV/REM instructions for ARCv2 cores. + +@item -mcode-density +@opindex mcode-density +Enable code density instructions for ARC EM, default on for ARC HS. + +@item -mmpy-option=@var{multo} +@opindex mmpy-option +Compile ARCv2 code with a multiplier design option. @samp{wlh1} is +the default value. The recognized values for @var{multo} are: + +@table @samp +@item 0 +No multiplier available. + +@item 1 +@opindex w +The multiply option is set to w: 16x16 multiplier, fully pipelined. +The following instructions are enabled: MPYW, and MPYUW. + +@item 2 +@opindex wlh1 +The multiply option is set to wlh1: 32x32 multiplier, fully +pipelined (1 stage). The following instructions are additionaly +enabled: MPY, MPYU, MPYM, MPYMU, and MPY_S. + +@item 3 +@opindex wlh2 +The multiply option is set to wlh2: 32x32 multiplier, fully pipelined +(2 stages). The following instructions are additionaly enabled: MPY, +MPYU, MPYM, MPYMU, and MPY_S. + +@item 4 +@opindex wlh3 +The multiply option is set to wlh3: Two 16x16 multiplier, blocking, +sequential. The following instructions are additionaly enabled: MPY, +MPYU, MPYM, MPYMU, and MPY_S. + +@item 5 +@opindex wlh4 +The multiply option is set to wlh4: One 16x16 multiplier, blocking, +sequential. The following instructions are additionaly enabled: MPY, +MPYU, MPYM, MPYMU, and MPY_S. + +@item 6 +@opindex wlh5 +The multiply option is set to wlh5: One 32x4 multiplier, blocking, +sequential. The following instructions are additionaly enabled: MPY, +MPYU, MPYM, MPYMU, and MPY_S. + +@end table + +This option is only available for ARCv2 cores@. + @end table The following options are passed through to the assembler, and also -- 2.30.2