From f5804e64b41e167bd5578df86e05329dd06c35d6 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Marek=20Ol=C5=A1=C3=A1k?= Date: Mon, 12 Jul 2010 22:29:28 +0200 Subject: [PATCH] r300g: rework the draw_rectangle hook It is a lot simplier, cleaner, and more stable now. --- src/gallium/drivers/r300/r300_render.c | 112 +++++-------------------- 1 file changed, 23 insertions(+), 89 deletions(-) diff --git a/src/gallium/drivers/r300/r300_render.c b/src/gallium/drivers/r300/r300_render.c index 1e0369b3774..cf80692300a 100644 --- a/src/gallium/drivers/r300/r300_render.c +++ b/src/gallium/drivers/r300/r300_render.c @@ -1022,8 +1022,7 @@ struct draw_stage* r300_draw_stage(struct r300_context* r300) /* If we used a quad to draw a rectangle, the pixels on the main diagonal * would be computed and stored twice, which makes the clear/copy codepaths - * somewhat inefficient. Instead we use a rectangular point sprite with TCL - * turned off. */ + * somewhat inefficient. Instead we use a rectangular point sprite. */ static void r300_blitter_draw_rectangle(struct blitter_context *blitter, unsigned x1, unsigned y1, unsigned x2, unsigned y2, @@ -1032,49 +1031,24 @@ static void r300_blitter_draw_rectangle(struct blitter_context *blitter, const float attrib[4]) { struct r300_context *r300 = r300_context(util_blitter_get_pipe(blitter)); + unsigned last_sprite_coord_enable = r300->sprite_coord_enable; unsigned width = x2 - x1; unsigned height = y2 - y1; - unsigned i, dwords; - unsigned vertex_size = type == UTIL_BLITTER_ATTRIB_COLOR ? 7 : 3; - unsigned last_sprite_coord_enable = r300->sprite_coord_enable; - uint32_t vap_cntl_status; + unsigned vertex_size = + type == UTIL_BLITTER_ATTRIB_COLOR || !r300->draw ? 8 : 4; + unsigned dwords = 13 + vertex_size + + (type == UTIL_BLITTER_ATTRIB_TEXCOORD ? 7 : 0); + const float zeros[4] = {0, 0, 0, 0}; CB_LOCALS; - /* Compute the number of dwords. */ - dwords = r300->draw ? 0 : 4; - switch (type) { - case UTIL_BLITTER_ATTRIB_COLOR: - dwords += 29; - break; - - case UTIL_BLITTER_ATTRIB_TEXCOORD: - dwords += 32; - break; - - case UTIL_BLITTER_ATTRIB_NONE: - dwords += 25; - break; - } - - /* Initialize the VAP control. */ - vap_cntl_status = R300_VAP_TCL_BYPASS; -#ifdef PIPE_ARCH_LITTLE_ENDIAN - vap_cntl_status |= R300_VC_NO_SWAP; -#else - vap_cntl_status |= R300_VC_32BIT_SWAP); -#endif - if (type == UTIL_BLITTER_ATTRIB_TEXCOORD) r300->sprite_coord_enable = 1; r300_update_derived_state(r300); /* Mark some states we don't care about as non-dirty. */ - r300->viewport_state.dirty = FALSE; r300->clip_state.dirty = FALSE; - r300->vertex_stream_state.dirty = FALSE; - r300->vs_state.dirty = FALSE; - r300->vs_constants.dirty = FALSE; + r300->viewport_state.dirty = FALSE; r300_prepare_for_rendering(r300, PREP_FIRST_DRAW, NULL, dwords, 0, 0, NULL); @@ -1082,51 +1056,18 @@ static void r300_blitter_draw_rectangle(struct blitter_context *blitter, /* Set up GA. */ OUT_CB_REG(R300_GA_POINT_SIZE, (height * 6) | ((width * 6) << 16)); - switch (type) { - case UTIL_BLITTER_ATTRIB_COLOR: - /* Set up the VAP output. */ - OUT_CB_REG(R300_VAP_VSM_VTX_ASSM, - R300_INPUT_CNTL_POS | R300_INPUT_CNTL_COLOR); - OUT_CB_REG_SEQ(R300_VAP_OUTPUT_VTX_FMT_0, 2); - OUT_CB(R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT | - R300_VAP_OUTPUT_VTX_FMT_0__COLOR_0_PRESENT); - OUT_CB(0); - /* Set up PSC. */ - OUT_CB_REG(R300_VAP_PROG_STREAM_CNTL_0, - R300_DATA_TYPE_FLOAT_3 | - ((R300_DATA_TYPE_FLOAT_4 | (2 << R300_DST_VEC_LOC_SHIFT) | - R300_LAST_VEC) << 16)); - OUT_CB_REG(R300_VAP_PROG_STREAM_CNTL_EXT_0, - R300_VAP_SWIZZLE_XYZ1 | (R300_VAP_SWIZZLE_XYZW << 16)); - break; - - case UTIL_BLITTER_ATTRIB_TEXCOORD: - /* Set up the GA to generate texcoords. */ - OUT_CB_REG(R300_GB_ENABLE, R300_GB_POINT_STUFF_ENABLE | - (R300_GB_TEX_STR << R300_GB_TEX0_SOURCE_SHIFT)); - OUT_CB_REG_SEQ(R300_GA_POINT_S0, 4); - OUT_CB_32F(attrib[0]); - OUT_CB_32F(attrib[3]); - OUT_CB_32F(attrib[2]); - OUT_CB_32F(attrib[1]); - /* Pass-through. */ - - case UTIL_BLITTER_ATTRIB_NONE: - /* Set up the VAP output. */ - OUT_CB_REG(R300_VAP_VSM_VTX_ASSM, R300_INPUT_CNTL_POS); - OUT_CB_REG_SEQ(R300_VAP_OUTPUT_VTX_FMT_0, 2); - OUT_CB(R300_VAP_OUTPUT_VTX_FMT_0__POS_PRESENT); - OUT_CB(0); - /* Set up PSC. */ - OUT_CB_REG(R300_VAP_PROG_STREAM_CNTL_0, - R300_DATA_TYPE_FLOAT_3 | R300_LAST_VEC); - OUT_CB_REG(R300_VAP_PROG_STREAM_CNTL_EXT_0, R300_VAP_SWIZZLE_XYZ1); - break; + if (type == UTIL_BLITTER_ATTRIB_TEXCOORD) { + /* Set up the GA to generate texcoords. */ + OUT_CB_REG(R300_GB_ENABLE, R300_GB_POINT_STUFF_ENABLE | + (R300_GB_TEX_STR << R300_GB_TEX0_SOURCE_SHIFT)); + OUT_CB_REG_SEQ(R300_GA_POINT_S0, 4); + OUT_CB_32F(attrib[0]); + OUT_CB_32F(attrib[3]); + OUT_CB_32F(attrib[2]); + OUT_CB_32F(attrib[1]); } /* Set up VAP controls. */ - if (!r300->draw) - OUT_CB_REG(R300_VAP_CNTL_STATUS, vap_cntl_status); OUT_CB_REG(R300_VAP_CLIP_CNTL, R300_CLIP_DISABLE); OUT_CB_REG(R300_VAP_VTE_CNTL, R300_VTX_XY_FMT | R300_VTX_Z_FMT); OUT_CB_REG(R300_VAP_VTX_SIZE, vertex_size); @@ -1142,26 +1083,19 @@ static void r300_blitter_draw_rectangle(struct blitter_context *blitter, OUT_CB_32F(x1 + width * 0.5f); OUT_CB_32F(y1 + height * 0.5f); OUT_CB_32F(depth); + OUT_CB_32F(1); - if (type == UTIL_BLITTER_ATTRIB_COLOR) - for (i = 0; i < 4; i++) - OUT_CB_32F(attrib[i]); - - /* If we do not re-enable VAP immediately after the draw packet, - * it goes crazy. Sometimes I wish this hardware didn't do random shit. */ - if (!r300->draw) - OUT_CB_REG(R300_VAP_CNTL_STATUS, - vap_cntl_status & ~R300_VAP_TCL_BYPASS); + if (vertex_size == 8) { + if (!attrib) + attrib = zeros; + OUT_CB_TABLE(attrib, 4); + } END_CB; /* Restore the state. */ r300->clip_state.dirty = TRUE; - r300->rs_block_state.dirty = TRUE; r300->rs_state.dirty = TRUE; - r300->vertex_stream_state.dirty = TRUE; r300->viewport_state.dirty = TRUE; - r300->vs_state.dirty = TRUE; - r300->vs_constants.dirty = TRUE; r300->sprite_coord_enable = last_sprite_coord_enable; } -- 2.30.2