From fb06d803e1e4a60c00d0df09e6ef7bfc1c2d1df1 Mon Sep 17 00:00:00 2001 From: Florent Kermarrec Date: Tue, 16 Jul 2013 10:43:15 +0200 Subject: [PATCH] s6ddrphy: revert CAS LATENCY 3 (configurable CAS Latency was buggy) --- milkymist/s6ddrphy/__init__.py | 22 ++++++++++++++++------ top.py | 5 +++-- 2 files changed, 19 insertions(+), 8 deletions(-) diff --git a/milkymist/s6ddrphy/__init__.py b/milkymist/s6ddrphy/__init__.py index 964b6dd3..aa88c2ac 100644 --- a/milkymist/s6ddrphy/__init__.py +++ b/milkymist/s6ddrphy/__init__.py @@ -8,31 +8,41 @@ # # Assert dfi_rddata_en in the same cycle as the read # command. The data will come back on dfi_rddata -# CL + 2 cycles later, along with the assertion +# 5 cycles later, along with the assertion # of dfi_rddata_valid. # -# This PHY supports configurable CAS Latency. +# This PHY only supports CAS Latency 3. # Read commands must be sent on phase RDPHASE. # Write commands must be sent on phase WRPHASE. #/ # Todo: # - use CSR for bitslip? +# - add configurable CAS Latency +# - automatically determines wrphase / rdphase / latencies according to phy_settings from migen.fhdl.std import * from migen.bus.dfi import * from migen.genlib.record import * +def get_latencies(phy_settings): + read_latency=5 + write_latency=0 + return read_latency, write_latency + class S6DDRPHY(Module): def __init__(self, pads, phy_settings, bitslip): if phy_settings.type not in ["DDR", "LPDDR", "DDR2"]: raise NotImplementedError("S6DDRPHY only supports DDR, LPDDR and DDR2") + if phy_settings.cl != 3: + raise NotImplementedError("S6DDRPHY only supports CAS LATENCY 3 for now") a = flen(pads.a) ba = flen(pads.ba) d = flen(pads.dq) nphases = phy_settings.nphases self.phy_settings = phy_settings + read_latency, write_latency = get_latencies(phy_settings) self.dfi = Interface(a, ba, nphases*d, nphases) self.clk4x_wr_strb = Signal() @@ -57,7 +67,7 @@ class S6DDRPHY(Module): # # select active phase - # sys_clk ____----____---- + # sys_clk ----____----____ # phase_sel(nphases=1) 0 0 # phase_sel(nphases=2) 0 1 0 1 # phase_sel(nphases=4) 0 1 2 3 0 1 2 3 @@ -338,11 +348,11 @@ class S6DDRPHY(Module): self.comb += drive_dqs.eq(r_dfi_wrdata_en[1]) - rddata_sr = Signal(phy_settings.cl+2) - sd_sys += rddata_sr.eq(Cat(rddata_sr[1:phy_settings.cl+2], d_dfi[phy_settings.rdphase].rddata_en)) + rddata_sr = Signal(read_latency) + sd_sys += rddata_sr.eq(Cat(rddata_sr[1:read_latency], d_dfi[phy_settings.rdphase].rddata_en)) for n, phase in enumerate(self.dfi.phases): self.comb += [ phase.rddata.eq(d_dfi[n].rddata), phase.rddata_valid.eq(rddata_sr[0]), - ] + ] \ No newline at end of file diff --git a/top.py b/top.py index 6db182bd..a4d687f3 100644 --- a/top.py +++ b/top.py @@ -38,6 +38,7 @@ sdram_geom = lasmicon.GeomSettings( row_a=13, col_a=10 ) +sdram_phy_read_latency, sdram_phy_write_latency = s6ddrphy.get_latencies(sdram_phy) sdram_timing = lasmicon.TimingSettings( tRP=ns(15), tRCD=ns(15), @@ -46,8 +47,8 @@ sdram_timing = lasmicon.TimingSettings( tREFI=ns(7800, False), tRFC=ns(70), - read_latency=5, - write_latency=0, + read_latency=sdram_phy_read_latency+0, + write_latency=sdram_phy_write_latency+0, req_queue_size=8, read_time=32, -- 2.30.2