From fd96c1f3208eedadac1fa2e2346e4e135824032e Mon Sep 17 00:00:00 2001 From: Michael Meissner Date: Fri, 20 Sep 1996 12:36:54 +0000 Subject: [PATCH] PSIM 1996/9/19 update --- sim/ppc/.Sanitize | 4 - sim/ppc/configure.in | 4 +- sim/ppc/device.maybe | 876 ------------------------------------------- sim/ppc/hw_pci_ide.c | 1 - 4 files changed, 2 insertions(+), 883 deletions(-) delete mode 100644 sim/ppc/device.maybe delete mode 100644 sim/ppc/hw_pci_ide.c diff --git a/sim/ppc/.Sanitize b/sim/ppc/.Sanitize index e6c7b197890..b1c0e199add 100644 --- a/sim/ppc/.Sanitize +++ b/sim/ppc/.Sanitize @@ -50,7 +50,6 @@ debug.c debug.h device.c device.h -device.maybe device_table.c device_table.h dgen.c @@ -96,9 +95,6 @@ hw_iobus.c hw_memory.c hw_nvram.c hw_pal.c -hw_pci_ide.c -hw_phb.c -hw_phb.h hw_pic.c hw_register.c hw_trace.c diff --git a/sim/ppc/configure.in b/sim/ppc/configure.in index 4924f78b7f0..82dff261da3 100644 --- a/sim/ppc/configure.in +++ b/sim/ppc/configure.in @@ -170,7 +170,7 @@ fi])dnl AC_ARG_ENABLE(sim-hardware, [ --enable-sim-hardware=list Specify the hardware to be included in the build.], -[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal" +[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com" case "${enableval}" in yes) ;; no) AC_MSG_ERROR("List of hardware must be specified for --enable-sim-hardware"); hardware="";; @@ -181,7 +181,7 @@ sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'` sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'` if test x"$silent" != x"yes" && test x"$hardware" != x""; then echo "Setting hardware to $sim_hw_src, $sim_hw_obj" -fi],[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal" +fi],[hardware="cpu,memory,nvram,iobus,htab,disk,trace,register,vm,init,core,pal,com" sim_hw_src=`echo $hardware | sed -e 's/,/.c hw_/g' -e 's/^/hw_/' -e s'/$/.c/'` sim_hw_obj=`echo $sim_hw_src | sed -e 's/\.c/.o/g'` if test x"$silent" != x"yes"; then diff --git a/sim/ppc/device.maybe b/sim/ppc/device.maybe deleted file mode 100644 index b18ade1c6ab..00000000000 --- a/sim/ppc/device.maybe +++ /dev/null @@ -1,876 +0,0 @@ -/* This file is part of the program psim. - - Copyright (C) 1994-1996, Andrew Cagney - - This program is free software; you can redistribute it and/or modify - it under the terms of the GNU General Public License as published by - the Free Software Foundation; either version 2 of the License, or - (at your option) any later version. - - This program is distributed in the hope that it will be useful, - but WITHOUT ANY WARRANTY; without even the implied warranty of - MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. - - */ - - -#ifndef _DEVICE_H_ -#define _DEVICE_H_ - -#ifndef INLINE_DEVICE -#define INLINE_DEVICE -#endif - -/* declared in basics.h, this object is used everywhere */ -/* typedef struct _device device; */ - - -/* Device templates: - - *** THIS SECTION DESCRIBES HOW A DEVICE HAS A STATIC AND DYNAMIC - COMPONENT ** on the device in the tree is dynamic. ***** - - A device node is created from its template. The only valid - operation on a template is to create a device node from it: */ - -INLINE_DEVICE\ -(device *) device_template_create_device -(device *parent, - const char *name, - const char *unit_address, - const char *args); - -/* The create is paramaterized by both the devices unit address (a - string that is converted into numeric form by the devices parent) - and optionally extra argument information. - - The actual device node is constructed by a number of pieces provided - by the template function: */ - -typedef struct _device_callbacks device_callbacks; - -INLINE_DEVICE\ -(device *) device_create_from -(const char *name, - const device_unit *unit_address, - void *data, - const device_callbacks *callbacks, - device *parent); - -/* OpenBoot discusses the creation of packages (devices). */ - - -/* Devices: - - As with OpenBoot, all nodes in the device tree are considered to be - devices. Each node then has associated with it a number of methods - and properties (duscussed later). - - OpenBoot documentation refers to devices, device nodes, packages, - package instances, methods, static methods and properties. This - device implementation uses its own termonology. Where ever it - exists, the notes will indicate a correspondance between PSIM terms - and those found in OpenBoot. - - device: - - A device is the basic building block in this model. A device can - be further categorized into one of three classes - template, node - and instance. - - device-node (aka device): - - The device tree is constructed from device-nodes. Each node has - both local state (data), a relationship with the device nodes - around it and an address (unit-address) on the parents bus `bus' */ - -INLINE_DEVICE\ -(device *) device_parent -(device *me); - -INLINE_DEVICE\ -(device *) device_sibling -(device *me); - -INLINE_DEVICE\ -(device *) device_child -(device *me); - -INLINE_DEVICE\ -(const char *) device_name -(device *me); - -INLINE_DEVICE\ -(const char *) device_path -(device *me); - -INLINE_DEVICE\ -(void *) device_data -(device *me); - -INLINE_DEVICE\ -(psim *) device_system -(device *me); - -typedef struct _device_unit { - int nr_cells; - unsigned32 cells[4]; /* unused cells are zero */ -} device_unit; - -INLINE_DEVICE\ -(const device_unit *) device_unit_address -(device *me); - -/* Each device-node normally corresponds to a hardware component of - the system being modeled. Leaf nodes matching external devices and - intermediate nodes matching bridges and controllers. - - Device nodes also support methods that are an abstraction of the - transactions that occure in real hardware. These operations - (io/dma read/writes and interrupts) are discussed separatly. - - OpenBoot refers to device nodes by many names. The most common are - device, device node and package. */ - - -/* Properties: - - In IEEE1275 many of the the characteristics of a device are stored - in the device tree as properties. Each property consists of a name - and an associated (implicitly typed) value. A device will have a - list of properties attached to it. The user is able to manipulate - the list, adding and removing properties and set/modify the value - of each property. - - PSIM's device tree follows this model but with the addition of - strongly typing each property's value. The simulator will detect - at run time, the incorrect use of a property. - - In addition to the standard use of properties, Both PSIM and - individual devices will use properties to record simulation - configuration information. For instance, a disk device might store - in a string property called <> the name of the file that - contains the disk image to use. */ - -/* The following are valid property types. The property `array' is a - for generic untyped data. */ - -typedef enum { - array_property, - boolean_property, - ihandle_property, - integer_property, - string_property, -} device_property_type; - -typedef struct _device_property device_property; -struct _device_property { - device *owner; - const char *name; - device_property_type type; - unsigned sizeof_array; - const void *array; - const device_property *original; - object_disposition disposition; -}; - - -/* iterate through the properties attached to a device */ - -INLINE_DEVICE\ -(const device_property *) device_next_property -(const device_property *previous); - -INLINE_DEVICE\ -(const device_property *) device_find_property -(device *me, - const char *property); /* NULL for first property */ - - -/* Manipulate the properties belonging to a given device. - - SET on the other hand will force the properties value. The - simulation is aborted if the property was present but of a - conflicting type. - - FIND returns the specified properties value, aborting the - simulation if the property is missing. Code locating a property - should first check its type (using device_find_property above) and - then obtain its value using the below. */ - - -INLINE_DEVICE\ -(void) device_set_array_property -(device *me, - const char *property, - const void *array, - int sizeof_array); - -INLINE_DEVICE\ -(const device_property *) device_find_array_property -(device *me, - const char *property); - - -#if 0 -INLINE_DEVICE\ -(void) device_set_boolean_property -(device *me, - const char *property, - int bool); -#endif - -INLINE_DEVICE\ -(int) device_find_boolean_property -(device *me, - const char *property); - - -#if 0 -INLINE_DEVICE\ -(void) device_set_ihandle_property -(device *me, - const char *property, - device_instance *ihandle); -#endif - -INLINE_DEVICE\ -(device_instance *) device_find_ihandle_property -(device *me, - const char *property); - - -#if 0 -INLINE_DEVICE\ -(void) device_set_integer_property -(device *me, - const char *property, - signed_word integer); -#endif - -INLINE_DEVICE\ -(signed_word) device_find_integer_property -(device *me, - const char *property); - - -#if 0 -INLINE_DEVICE\ -(void) device_set_string_property -(device *me, - const char *property, - const char *string); -#endif - -INLINE_DEVICE\ -(const char *) device_find_string_property -(device *me, - const char *property); - - -/* Instances: - - As with IEEE1275, a device can be opened, creating an instance. - Instances provide more abstract interfaces to the underlying - hardware. For example, the instance methods for a disk may include - code that is able to interpret file systems found on disks. Such - methods would there for allow the manipulation of files on the - disks file system. The operations would be implemented using the - basic block I/O model provided by the disk. - - This model includes methods that faciliate the creation of device - instance and (should a given device support it) standard operations - on those instances. */ - - *** device-instance *** - - Devices support an abstract I/O model. A unique I/O instance can be - created from a device node and then this instance used to perform - I/O that is independant of other instances. */ - -typedef struct _device_instance_callbacks device_instance_callbacks; - -INLINE_DEVICE\ -(device_instance *) device_create_instance_from -(device *me, /*OR*/ device_instance *parent, - void *data, - const char *path, - const char *args, - const device_instance_callbacks *callbacks); - -INLINE_DEVICE\ -(device_instance *) device_create_instance -(device *me, - const char *device_specifier); - -INLINE_DEVICE\ -(void) device_instance_delete -(device_instance *instance); - -INLINE_DEVICE\ -(int) device_instance_read -(device_instance *instance, - void *addr, - unsigned_word len); - -INLINE_DEVICE\ -(int) device_instance_write -(device_instance *instance, - const void *addr, - unsigned_word len); - -INLINE_DEVICE\ -(int) device_instance_seek -(device_instance *instance, - unsigned_word pos_hi, - unsigned_word pos_lo); - -INLINE_DEVICE\ -(unsigned_word) device_instance_claim -(device_instance *instance, - unsigned_word address, - unsigned_word length, - unsigned_word alignment); - -INLINE_DEVICE\ -(void) device_instance_release -(device_instance *instance, - unsigned_word address, - unsigned_word length); - -INLINE_DEVICE\ -(device *) device_instance_device -(device_instance *instance); - -INLINE_DEVICE\ -(const char *) device_instance_path -(device_instance *instance); - -INLINE_DEVICE\ -(void *) device_instance_data -(device_instance *instance); - -/* A device instance can be marked (when created) as being permenant. - Such instances are assigned a reserved address and are *not* - deleted between simulation runs. - - OpenBoot refers to a device instace as a package instance */ - - -/* PIO: - - *** DESCRIBE HERE WHAT A PIO OPERATION IS and how, broadly it is - modeled **** - - - During initialization, each device attaches its self to is parent - registering the address spaces that it is interested in: - - a. The <> device attaches its self to its parent <> - device at address <<0x3f8>> through to address <<0x3f8 + 16>>. - - b. The <> has in turn attached its self to addresses - <<0xf0000000 .. 0xf0100000>>. - - During the execution of the simulation propper, the following then - occure: - - 1. After any virtual to physical translation, the processor - passes the address to be read (or written to the core device). - (eg address 0xf00003f8). - - 2. The core device then looks up the specified addresses in its - address to device map, determines that in this case the address - belongs to the phb and passes it down. - - 3. The <> in turn determines that the address belongs to the - serial port and passes to that device the request for an access - to location <<0x3f8>>. - - @figure mio - - */ - -/* Device Hardware - - This model assumes that the data paths of the system being modeled - have a tree topology. That is, one or more processors sit at the - top of a tree. That tree containing leaf nodes (real devices) and - branch nodes (bridges). - - For instance, consider the tree: - - /pci # PCI-HOST bridge - /pci/pci1000,1@1 # A pci controller - /pci/isa8086 # PCI-ISA bridge - /pci/isa8086/fdc@300 # floppy disk controller on ISA bus - - A processor needing to access the device fdc@300 on the ISA bus - would do so using a data path that goes through the pci-host bridge - (pci)and the isa-pci bridge (isa8086) to finally reach the device - fdc@300. As the data transfer passes through each intermediate - bridging node that bridge device is able to (just like with real - hardware) manipulate either the address or data involved in the - transfer. */ - -INLINE_DEVICE\ -(unsigned) device_io_read_buffer -(device *me, - void *dest, - int space, - unsigned_word addr, - unsigned nr_bytes, - cpu *processor, - unsigned_word cia); - -INLINE_DEVICE\ -(unsigned) device_io_write_buffer -(device *me, - const void *source, - int space, - unsigned_word addr, - unsigned nr_bytes, - cpu *processor, - unsigned_word cia); - -/* To avoid the need for an intermediate (bridging) node to ask each - of its child devices in turn if an IO access is intended for them, - parent nodes maintain a table mapping addresses directly to - specific devices. When a device is `connected' to its bus it - attaches its self to its parent. */ - -/* Address access attributes */ -typedef enum _access_type { - access_invalid = 0, - access_read = 1, - access_write = 2, - access_read_write = 3, - access_exec = 4, - access_read_exec = 5, - access_write_exec = 6, - access_read_write_exec = 7, -} access_type; - -/* Address attachement types */ -typedef enum _attach_type { - attach_invalid, - attach_raw_memory, - attach_callback, - /* ... */ -} attach_type; - -INLINE_DEVICE\ -(void) device_attach_address -(device *me, - const char *name, - attach_type attach, - int space, - unsigned_word addr, - unsigned nr_bytes, - access_type access, - device *who); /*callback/default*/ - -INLINE_DEVICE\ -(void) device_detach_address -(device *me, - const char *name, - attach_type attach, - int space, - unsigned_word addr, - unsigned nr_bytes, - access_type access, - device *who); /*callback/default*/ - -/* where the attached address space can be any of - - callback - all accesses to that range of addresses are past on to - the attached child device. The callback addresses are ordered - according to the callback level (attach_callback, .. + 1, .. + 2, - ...). Lower levels are searched first. This facilitates the - implementation of more unusual addressing schema such as - subtractive decoding (as seen on the PCI bus). Within a given - callback level addresses must not overlap. - - memory - the specified address space contains RAM, the node that is - having the ram attached is responsible for allocating space for and - maintaining that space. The device initiating the attach will not - be notified of accesses to such an attachement. - - The memory attachment is very important. By giving the parent node - the responsability (and freedom) of managing the RAM, that node is - able to implement memory spaces more efficiently. For instance it - could `cache' accesses or merge adjacent memory areas. - - - In addition to I/O and DMA, devices interact with the rest of the - system via interrupts. Interrupts are discussed separatly. */ - - -/* DMA: - - *** DESCRIBE HERE WHAT A DMA OPERATION IS AND HOW IT IS MODELED, - include an interation of an access being reflected back down *** - - */ - -/* Conversly, the device pci1000,1@1 my need to perform a dma transfer - into the cpu/memory core. Just as I/O moves towards the leaves, - dma transfers move towards the core via the initiating devices - parent nodes. The root device (special) converts the DMA transfer - into reads/writes to memory */ - -INLINE_DEVICE\ -(unsigned) device_dma_read_buffer -(device *me, - void *dest, - int space, - unsigned_word addr, - unsigned nr_bytes); - -INLINE_DEVICE\ -(unsigned) device_dma_write_buffer -(device *me, - const void *source, - int space, - unsigned_word addr, - unsigned nr_bytes, - int violate_read_only_section); - - -/* Interrupts: - - *** DESCRIBE HERE THE INTERRUPT NETWORK *** - - PSIM models interrupts and their wiring as a directed graph of - connections between interrupt sources and destinations. The source - and destination are both a tupple consisting of a port number and - device. Both multiple destinations attached to a single source and - multiple sources attached to a single destination are allowed. - - When a device drives an interrupt port with multiple destinations a - broadcast of that interrupt event (message to all destinations) - occures. Each of those destination (device/port) are able to - further propogate the interrupt until it reaches its ultimate - destination. - - Normally an interrupt source would be a model of a real device - (such as a keyboard) while an interrupt destination would be an - interrupt controller. The facility that allows an interrupt to be - delivered to multiple devices and to be propogated from device to - device was designed to support the requirements specified by - OpenPIC (ISA interrupts go to both OpenPIC and 8259), CHRP (8259 - connected to OpenPIC) and hardware designs such as PCI-PCI - bridges. */ - - -/* Interrupting a processor - - The cpu object provides methods for delivering external interrupts - to a given processor. - - The problem of synchronizing external interrupt delivery with the - execution of the cpu is handled internally by the processor object. */ - - - -/* Interrupt Source - - A device drives its interrupt line using the call: */ - -INLINE_DEVICE\ -(void) device_interrupt_event -(device *me, - int my_port, - int value, - cpu *processor, - unsigned_word cia); - -/* This interrupt event will then be propogated to any attached - interrupt destinations. - - Any interpretation of PORT and VALUE is model dependant. However - as guidelines the following are recommended: PCI interrupts a-d - correspond to lines 0-3; level sensative interrupts be requested - with a value of one and withdrawn with a value of 0; edge sensative - interrupts always have a value of 1, the event its self is treated - as the interrupt. - - - Interrupt Destinations - - Attached to each interrupt line of a device can be zero or more - desitinations. These destinations consist of a device/port pair. - A destination is attached/detached to a device line using the - attach and detach calls. */ - -INLINE_DEVICE\ -(void) device_interrupt_attach -(device *me, - int my_port, - device *dest, - int dest_port, - object_disposition disposition); - -INLINE_DEVICE\ -(void) device_interrupt_detach -(device *me, - int my_port, - device *dest, - int dest_port); - -/* DESTINATION is attached (detached) to LINE of the device ME - - - Interrupt conversion - - Users refer to interrupt port numbers symbolically. For instance a - device may refer to its `INT' signal which is internally - represented by port 3. - - To convert to/from the symbolic and internal representation of a - port name/number. The following functions are available. */ - -INLINE_DEVICE\ -(int) device_interrupt_decode -(device *me, - const char *symbolic_name); - -INLINE_DEVICE\ -(int) device_interrupt_encode -(device *me, - int port_number, - char *buf, - int sizeof_buf); - - - -/* Initialization: - - In PSIM, the device tree is created and then initialized in stages. - When using devices it is important to be clear what initialization - the simulator assumes is being performed during each of these - stages. - - Firstly, each device is created in isolation (using the create from - template method). Only after it has been created will a device be - inserted into the tree ready for initialization. - - Once the tree is created, it is initialized as follows: - - 1. All properties (apart from those containing instances) - are (re)initialized - - 2. Any interrupts addeded as part of the simulation run - are removed. - - 4. The initialize address method of each device (in top - down order) is called. At this stage the device - is expected to: - - o Clear address maps and delete allocated memory - associated with the devices children. - - o (Re)attach its own addresses to its parent device. - - o Ensure that it is otherwize sufficiently - initialized such that it is ready for a - device instance create call. - - 5. All properties containing an instance of - a device are (re)initialized - - 6. The initialize data method for each device is called (in - top down) order. At this stage the device is expected to: - - o Perform any needed data transfers. Such - transfers would include the initialization - of memory created during the address initialization - stage using DMA. - - */ - -INLINE_DEVICE\ -(void) device_tree_init -(device *root, - psim *system); - - - -/* IOCTL: - - Very simply, a catch all for any thing that turns up that until now - either hasn't been thought of or doesn't justify an extra function. */ - -EXTERN_DEVICE\ -(int) device_ioctl -(device *me, - cpu *processor, - unsigned_word cia, - ...); - - -/* External communcation: - - Devices interface to the external environment */ - -/* device_error() reports the problem to the console and aborts the - simulation. The error message is prefixed with the name of the - reporting device. */ - -EXTERN_DEVICE\ -(void volatile) device_error -(device *me, - const char *fmt, - ...) __attribute__ ((format (printf, 2, 3))); - - -/* Tree utilities: - - In addition to the standard method of creating a device from a - device template, the following sortcuts can be used. - - Create a device or property from a textual representation */ - -EXTERN_DEVICE\ -(device *) device_tree_add_parsed -(device *current, - const char *fmt, - ...) __attribute__ ((format (printf, 2, 3))); - -/* where FMT,... once formatted (using vsprintf) is used to locate and - create either a device or property. Its syntax is almost identical - to that used in OpenBoot documentation - the only extension is in - allowing properties and their values to be specified vis: - - "/pci/pci1000,1@1/disk@0,0" - - Path: - - The path to a device or property can either be absolute (leading - `/') or relative (leading `.' or `..'). Relative paths start from - the CURRENT node. The new current node is returned as the result. - In addition, a path may start with a leading alias (resolved by - looking in /aliases). - - Device name: - - "@" [ ":" ] - - Where is the name of the template device, is a - textual specification of the devices unit address (that is - converted into a numeric form by the devices parent) and are - optional additional information to be passed to the device-template - when it creates the device. - - Properties: - - Properties are specified in a similar way to devices except that - the last element on the path (which would have been the device) is - the property name. This path is then followed by the property - value. Unlike OpenBoot, the property values in the device tree are - strongly typed. - - String property: - - " " - " " "\"" - - Boolean property: - - " " [ "true" | "false" ] - Integer property or integer array property: - - " " { } - - Phandle property: - - " " "&" - - Ihandle property: - - " " "*" - - Duplicate existing property: - - " " "!" - - - In addition to properties, the wiring of interrupts can be - specified: - - Attach interrupt of to : - - " " ">" - - - Once created, a device tree can be traversed in various orders: */ - -typedef void (device_tree_traverse_function) - (device *device, - void *data); - -INLINE_DEVICE\ -(void) device_tree_traverse -(device *root, - device_tree_traverse_function *prefix, - device_tree_traverse_function *postfix, - void *data); - -/* Or dumped out in a format that can be read back in using - device_add_parsed() */ - -INLINE_DEVICE\ -(void) device_tree_print_device -(device *device, - void *ignore_data_argument); - -/* Individual nodes can be located using */ - -INLINE_DEVICE\ -(device *) device_tree_find_device -(device *root, - const char *path); - -/* And the current list of devices can be listed */ - -INLINE_DEVICE\ -(void) device_usage -(int verbose); - - -/* ihandles and phandles: - - Both device nodes and device instances, in OpenBoot firmware have - an external representation (phandles and ihandles) and these values - are both stored in the device tree in property nodes and passed - between the client program and the simulator during emulation - calls. - - To limit the potential risk associated with trusing `data' from the - client program, the following mapping operators `safely' convert - between the two representations: */ - -INLINE_DEVICE\ -(device *) external_to_device -(device *tree_member, - unsigned32 phandle); - -INLINE_DEVICE\ -(unsigned32) device_to_external -(device *me); - -INLINE_DEVICE\ -(device_instance *) external_to_device_instance -(device *tree_member, - unsigned32 ihandle); - -INLINE_DEVICE\ -(unsigned32) device_instance_to_external -(device_instance *me); - -#endif /* _DEVICE_H_ */ diff --git a/sim/ppc/hw_pci_ide.c b/sim/ppc/hw_pci_ide.c deleted file mode 100644 index 5057a291439..00000000000 --- a/sim/ppc/hw_pci_ide.c +++ /dev/null @@ -1 +0,0 @@ -something goes here -- 2.30.2