litex.git
2014-09-24 Florent Kermarrecuse new MiSoC UART with phase accumulators
2014-08-03 Florent Kermarrecuse verilog namespace to export mila configuration
2014-08-03 Florent Kermarrecuart2wishbone: disconnect rx line from shared pads...
2014-08-03 Florent Kermarrecclean up
2014-08-02 Florent Kermarrecstorage: use SyncFIFOBuffered to implement fifo in...
2014-08-01 Florent Kermarrecuse new MiSoC fifo (no flush signal)
2014-06-26 Florent Kermarrechost: add support for various csr_data width (8 & 32...
2014-06-21 Florent Kermarrecfix bit inversion on CSV/PY exports
2014-06-19 Florent Kermarreccreate dump class and specific export functions, add...
2014-06-17 Florent Kermarrechost: split read/export and add csv export
2014-06-05 Florent Kermarrecuart2wishbone: add default baudrate
2014-05-24 Florent Kermarrecmila: add input pipe to ease timing
2014-05-22 Florent Kermarrecdrivers: clean up / fixes
2014-05-22 Florent Kermarrecstorage: simplify run length encoder...
2014-05-22 Florent Kermarrecfix uart selection when opening wishbone
2014-05-20 Florent Kermarrecchange export format and simplify usage
2014-05-20 Florent Kermarrecmove some functions in drivers and export layout in csv
2014-05-20 Florent Kermarrecsimplify and clean up
2014-05-13 Florent Kermarrecstorage: simplify recorder...
2014-05-13 Florent Kermarrecsim: fix tb_trigger_csr
2014-04-20 Florent KermarrecREADME: update and point to misoc-de0nano examples
2014-04-20 Florent Kermarrecdrivers: add genericity & prog_range_detector, prog_edg...
2014-04-20 Florent Kermarrecrefactor code
2013-09-25 Florent Kermarrecuart2csr: add pads parameter
2013-09-22 Florent Kermarrecmila: test rle
2013-09-22 Florent Kermarrecmila: symplify usage
2013-09-22 Florent Kermarrecuse custom Records instead of Sink/Source (semms easier...
2013-09-22 Florent Kermarrecstorage: add run length encoder
2013-09-22 Florent Kermarrectrigger: add range_detector / edge_detector
2013-09-22 Florent Kermarrecmove trigger/recorder
2013-09-22 Florent Kermarreccom: add lm32 uart2wb bridge
2013-09-22 Florent Kermarrecclean up/ simplify
2013-09-22 Florent Kermarrecrefactoring
2013-06-16 Florent Kermarrecuse new migen API
2013-06-02 Florent Kermarrecsimplify signals connexion
2013-04-15 Florent Kermarrecupdate README
2013-04-14 Florent Kermarrecadapt to new CSR API
2013-04-02 Florent Kermarrecadd stb signal
2013-03-26 Florent Kermarrecadapt to mibuild & migen changes
2013-03-23 Florent Kermarrecadd Run Length Encoding
2013-03-23 Florent Kermarrecremove doc (to be re-written)
2013-03-23 Florent Kermarrecsimplify recorder
2013-03-22 Florent Kermarrecclean up
2013-03-22 Florent Kermarrecupdate driver api
2013-03-22 Florent Kermarrecclean up/fixes
2013-03-21 Florent Kermarrecfix uart2Csr and update miio example
2013-03-18 Florent Kermarrecupdate de0nano example/ remove de1 (wip)
2013-03-18 Florent KermarrecAdd uart2csr
2013-03-11 Florent Kermarrecget_registers --> get_registers_glue since it's conflic...
2013-03-01 Florent Kermarrecadapt to migen changes
2013-02-28 Florent Kermarrecuse mibuild for de1 example
2013-02-28 Florent Kermarrecuse mibuild for de0_nano example
2013-02-27 Florent Kermarreccompiles but untested
2013-02-26 Florent Kermarrecdoc: update
2013-02-26 Florent Kermarrecsim: update
2013-02-26 Florent Kermarrecexamples: use miscope.bridges
2013-02-26 Florent Kermarrecmove spi2csr to briges/spi2csr
2013-02-26 Florent Kermarrecexamples: update & simplify
2013-02-26 Florent Kermarrecexamples/../top: update
2013-02-22 Florent Kermarrec- reworking WIP
2013-01-27 Florent Kermarrec- fix timings.py
2013-01-21 Florent Kermarrec- update README...
2013-01-21 Florent Kermarrec- update README
2013-01-21 Florent Kermarrec- Update README
2013-01-21 Florent Kermarrec- Update README
2013-01-03 Florent Kermarrecadapt migScope to Migen changes
2012-09-26 Florent Kermarrecstart MigLa Doc
2012-09-18 Florent Kermarrecupdate schematics
2012-09-18 Florent Kermarrecupdate doc
2012-09-17 Florent Kermarrecadd Setup.py / .gitignore
2012-09-17 Florent Kermarrecadd test_MigLa_1 example : csr access analyzing
2012-09-17 Florent Kermarrec-add mask on Term
2012-09-17 Florent Kermarrecimprove truthtable tool
2012-09-17 Florent Kermarrecnew MigLa Class, simplify & clean up
2012-09-17 Florent Kermarrecuse of new migen clock_domains convention
2012-09-16 Florent Kermarrecupdate README
2012-09-16 Florent Kermarrecadd ramp / square / sinus signal generation in examples
2012-09-16 Florent Kermarrecsimplify recorder
2012-09-15 Florent Kermarrecexamples/de1 : add ramp / square mode
2012-09-15 Florent Kermarrecfix bug put_ptr on start, separate put / get processes
2012-09-15 Florent Kermarrecremove buggy workaround on read
2012-09-14 Florent Kermarrecfixes & clean up
2012-09-14 Florent Kermarrecadd test_MigLa.py (Wip)
2012-09-14 Florent Kermarrecadd access methods
2012-09-14 Florent KermarrecmigScope/tools/truthtable.py: add function to remove...
2012-09-13 Florent Kermarrecadd test_MigIo.py for de0_nano and de1 example
2012-09-13 Florent Kermarrecfix write function
2012-09-13 Florent Kermarrecadd address parameter to migIo
2012-09-13 Florent Kermarrecadd spi2Csr tools : Python Host & Arduino Uart<-->Spi...
2012-09-12 Florent Kermarrecexamples/de1: use of MigIo
2012-09-12 Florent Kermarrecadd MigIo Class
2012-09-12 Florent Kermarrecupdate README
2012-09-12 Florent Kermarrecexamples/de1: fix top
2012-09-12 Florent Kermarrecinitialize de1 example
2012-09-12 Florent Kermarrecexamples/de0_nano : add load cmd / change rst polarity
2012-09-09 Florent KermarrecClean up
2012-09-09 Florent KermarrecWip de0_nano example
2012-09-09 Florent KermarrecWip de0_nano example
2012-09-09 Florent KermarrecInitialize de0_nano example
2012-09-09 Florent KermarrecClean up
next