test/rtl/vhdl/idcode.vhdl

   1 -- reset JTAG interface and then IDCODE should be shifted out
   2
   3 library ieee;
   4 use ieee.std_logic_1164.ALL;
   5
   6 use work.c4m_jtag.ALL;
   7
   8 entity bench_idcode is
   9 end bench_idcode;
  10
  11 architecture rtl of bench_idcode is
  12   signal TCK:   std_logic;
  13   signal TMS:   std_logic;
  14   signal TDI:   std_logic;
  15   signal TDO:   std_logic;
  16   signal TRST_N: std_logic;
  17
  18   constant CLK_PERIOD:  time := 10 ns;
  19
  20   procedure ClkCycle(
  21     signal CLK: out std_logic;
  22     CLK_PERIOD: time
  23   ) is
  24   begin
  25     CLK <= '0';
  26     wait for CLK_PERIOD/4;
  27     CLK <= '1';
  28     wait for CLK_PERIOD/2;
  29     CLK <= '0';
  30     wait for CLK_PERIOD/4;
  31   end ClkCycle;
  32
  33   procedure ClkCycles(
  34     N:  integer;
  35     signal CLK: out std_logic;
  36     CLK_PERIOD: time
  37   ) is
  38   begin
  39     for i in 1 to N loop
  40       ClkCycle(CLK, CLK_PERIOD);
  41     end loop;
  42   end ClkCycles;
  43 begin
  44   JTAG_BLOCK: c4m_jtag_tap_controller
  45     -- Use default values
  46     port map (
  47       TCK => TCK,
  48       TMS => TMS,
  49       TDI => TDI,
  50       TDO => TDO,
  51       TRST_N => TRST_N,
  52       RESET => open,
  53       CAPTURE => open,
  54       SHIFT => open,
  55       UPDATE => open,
  56       IR => open,
  57       CORE_OUT => "0",
  58       CORE_IN => open,
  59       CORE_EN => "0",
  60       PAD_OUT => open,
  61       PAD_IN => "0",
  62       PAD_EN => open
  63     );
  64
  65   SIM: process
  66   begin
  67     -- Reset
  68     TCK <= '0';
  69     TMS <= '1';
  70     TDI <= '0';
  71     TRST_N <= '0';
  72     wait for 10*CLK_PERIOD;
  73
  74     TRST_N <= '1';
  75     wait for CLK_PERIOD;
  76
  77     -- Enter RunTestIdle
  78     TMS <= '0';
  79     ClkCycle(TCK, CLK_PERIOD);
  80     -- Enter SelectDRScan
  81     TMS <= '1';
  82     ClkCycle(TCK, CLK_PERIOD);
  83     -- Enter Capture
  84     TMS <= '0';
  85     ClkCycle(TCK, CLK_PERIOD);
  86     -- Enter Shift, run for 35 CLK cycles
  87     TMS <= '0';
  88     ClkCycles(35, TCK, CLK_PERIOD);
  89     -- Enter Exit1
  90     TMS <= '1';
  91     ClkCycle(TCK, CLK_PERIOD);
  92     -- Enter Update
  93     TMS <= '1';
  94     ClkCycle(TCK, CLK_PERIOD);
  95     -- To TestLogicReset
  96     TMS <= '1';
  97     ClkCycles(4, TCK, CLK_PERIOD);
  98
  99     -- end simulation
 100     wait;
 101   end process;
 102 end rtl;