misc: Add util/packet_pb2.py to .gitignore.

This file is automatically generated and not managed by git.

Change-Id: I077fe1ad89b65716a829b783a8b9c6e23b4d0b6b
Reviewed-on: https://gem5-review.googlesource.com/5006
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

misc: Use a Makefile to ensure util/packet_pb2.py is up to date.

Rather than just ensuring that packet_pb2.py is available in general, use a
Makefile to ensure that it's also up to date in case packet.proto has
changed.

Also, remove a check that ensures that the protobuf module is available,
since python will complain if it needs it and can't find it.

Finally, remove a comment which talks about manually regenerating the
packet_pb2.py module, something that hasn't been necessary for a while, even
with the old version of this code.

Change-Id: I40c5c1f577e6d7ad1af9a209309a1eb92f073317
Reviewed-on: https://gem5-review.googlesource.com/5005
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

misc: When building packet_pb2.py, don't assume a particular CWD.

Allow the script to be run from anywhere, and compute the paths relative to
where the script is. The script is assumed to be in util.

Change-Id: I8500ef959f2ff8119540c956f2b27789c96de60e
Reviewed-on: https://gem5-review.googlesource.com/5004
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

misc: Make decode_packet_trace.py print the new master ID fields.

Those fields are "repeated" which means they can appear zero times, which
they will in older style traces.

Change-Id: Ib6ff4aab521332cf1405549d0d6e922c51c12f32
Reviewed-on: https://gem5-review.googlesource.com/5003
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

misc: Small style fix in _EncodeVarint32.

Added spaces around the '|' operator.

Change-Id: I5cb82b98e7d2769605cde141f76a62a6e3c6570d
Reviewed-on: https://gem5-review.googlesource.com/5002
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

misc: Rename the (De|En)codeVarint function _(De|En)codeVarint32.

DecodeVarint implicitly truncates its inputs to 32 bits, and that should be
obvious from its name, and so not a surprise to the caller. EncodeVarint also
has the suffix added for consistency. Both functions are only used in
protolib.py, so add a _ to make it private (in the python sense) to the
module.

Change-Id: I835295717bb51672351b963fe1227ed619836f22
Reviewed-on: https://gem5-review.googlesource.com/5001
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

misc: Fix the indentation in DecodeVarint in util/protolib.py.

The DecodeVarint was, as a comment describes, lifted from
google.protobuf.internal.decoder. Unfortunately, the relative indentation of
some lines was changed, changing what scope they fell under. This changed the
behavior of the function, breaking it for multibyte and negative values.

This change restores the correct indentation and fixes the function's
behavior.

Change-Id: If645649506b0fe5a617b37a8202c9ca1c57aaf15
Reviewed-on: https://gem5-review.googlesource.com/5000
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

tlm: Elastic Trace Example with L2 Cache Added

The SystemC TLM examples already include an example setup for elastic
traces. However, in the provided examples the L2 cache is omitted. This
patch provides an additionall example, which also includes an L2 cache
on the gem5 side.

Change-Id: I49e9fa074b60007694abff37663f0400caf72099
Reviewed-on: https://gem5-review.googlesource.com/4900
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Christian Menard <christian.menard@tu-dresden.de>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

sim-se: Fix mremap for downward growing mmap regions

mremapFunc(...) did not respect Process::mmapGrowsDown(). This resulted
in an attempt to remap into an already allocated region and a panic in
FuncPageTable::allocate(...). This behavior can be observed in
435.gromacs.

Change-Id: Ib3ad33816126c76506d69679bdcefa7a98ef69f9
Reviewed-on: https://gem5-review.googlesource.com/4700
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>

arch-x86: fix CondInst decoding for MOV to Control Registers

MOV Rd,Cd is MR encoded but the control register is operand 2
not operand 1 hence this needs to be MODRM_REG not MODRM_RM.
While MOV Cd,Rd is RM encoded registers are also swapped, so
it also needs to be MODRM_REG as well (as it already correctly is).

This fixes incorrect UD2 reportings leading to invalid traps
reported in O3 on X86 FS introduced with 4e939a7 .

Change-Id: Ib33c8ba87b00e0264d33da44fff64ed9e4d2d9d8
Reviewed-on: https://gem5-review.googlesource.com/4861
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arch: change panic for Vector traceData to warn_once

Make the traceData panic for Vectors a warn_once.  It's a pity it's
not implemented but it's not a reason to abort the simulation entirely.

Change-Id: I5e97258fd4e3fa385cfe0c4b400524d1f7b154df
Reviewed-on: https://gem5-review.googlesource.com/4860
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

sim: make compile on FreeBSD prior to 11

FreeBSD before the early 11 development is expecting a char *
for stack.ss_sp rather than the standards compliant void *.
Catch that case and allow gem5 to compile on old FreeBSD versions.

Change-Id: Ic0ae560b52bfe5b3905ae87df791d349e053ec97
Reviewed-on: https://gem5-review.googlesource.com/4660
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

util: Make dot_writer ignore NULL simobjects.

Also centralize the code which iterates over the parameters of a simnode's
children, and remove a copy/paste block of code in the DVFS block of code.

Change-Id: I01305fbff59346010780ee386ba97ad9106b1f5d
Reviewed-on: https://gem5-review.googlesource.com/4849
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

dev: Make the IDE controller handle NULL simobject pointers.

Only panic if there are disks which would actually be connected to it beyond
its limit. Also skip past disks which are set to NULL. This is useful since
it lets you set up disks on different ports of the controller instead of
filling them contiguously.

Change-Id: I92f1316d3ad6931e25bfffeb34fb2603c0b95ce7
Reviewed-on: https://gem5-review.googlesource.com/4848
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

sim: Add a get_config_as_dict to the NullSimObject class.

Change-Id: I1ba6f6b196b7dfa790d1baaa23640bb3ed73f450
Reviewed-on: https://gem5-review.googlesource.com/4847
Maintainer: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

sim: Don't add the NULL SimObject as a child of other SimObjects.

Change-Id: Ibdc48af8e5a461077f75d781cfd8191586c54115
Reviewed-on: https://gem5-review.googlesource.com/4846
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

misc: Make the m5 utilities writefile command accept a host path.

When the writefile command is given one command line argument, it's treated
as the name of the file in the simulation and on the host. When there are two
arguments, the first is the filename in the simulation, and the second is the
name on the host.

Change-Id: I402925a9ff89665bee9910fb18b7f8b06b8f7d35
Reviewed-on: https://gem5-review.googlesource.com/4850
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

sim: Give the NullSimObject singleton a _name.

The name is 'Null', and is what __str__ returns.

Change-Id: I113f52496f5e9133b8d03206289b719fda003582
Reviewed-on: https://gem5-review.googlesource.com/4845
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

sim: Add a NullSimObject.descendants function.

Null simobjects don't have any descendants.

Change-Id: Ia43a99056709f422c9c817c017912d23d689fb1e
Reviewed-on: https://gem5-review.googlesource.com/4844
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

sim: Add a clear_parent function to NullSimObject.

Change-Id: I3842176f147997105fcc62aaf9cb93b9896708be
Reviewed-on: https://gem5-review.googlesource.com/4843
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

sim: Check the SimObjectVector.has_parent function to use the "any" function.

The existing code was essentially doing the same thing, but in a more
roundabout and obscure way. One difference between the two versions is that
I believe this will stop as soon as it encounters an element without a
parent, where the original version would call has_parent() on all the
elements regardless.

Change-Id: Ia1fef3083fc88fca11f8ecfca453476e33194695
Reviewed-on: https://gem5-review.googlesource.com/4842
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

sim: Only consider non-NULL elements in SimObjectVector.has_parent.

NullSimObject doesn't have a has_parent function, and it's not clear what its
return value should be if one were added. The appropriate value seems to
depend on why some other bit of code is checking if there's a parent in the
first place.

In SimObjectVector, the has_parent function is checking whether all of its
elements have a parent. In this particular case, the most reasonable thing
to do seems to be to just skip those elements.

Change-Id: I5f8cad66d1b22c5e37962492fd77cff9371e5af8
Reviewed-on: https://gem5-review.googlesource.com/4841
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

sim: Add a set_parent to NullSimObject which does nothing.

This lets attempts to set_parent on NullSimObject fall away harmlessly
without having to add a bunch of checks whenever set_parent is called.

Change-Id: I6d3510772ba71e765c4739e486e9f3d2460c4e11
Reviewed-on: https://gem5-review.googlesource.com/4840
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Gabe Black <gabeblack@google.com>

mem: Fill the new packet ID fields with master IDs when tracing packets.

This will let somebody consuming the memory packet trace make sense out of
the master IDs passed along with individual accesses.

Change-Id: I621d915f218728066ce95e6fc81f36d14ae7e597
Reviewed-on: https://gem5-review.googlesource.com/4800
Reviewed-by: Rahul Thakur <rjthakur@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem: Add a "map" of packet IDs to strings in probe traces.

This map is intended to map from request MasterIDs to master names. It could
be used to map to arbitrary strings in other situations, however.

The original idea to store this information was to add a new message type
which would store one ID and the string associated with it. This change stores
the IDs in the header instead so that they'll be easy to find and all
available before the packet data.

One downside of this approach is that it won't be possible to add new master
ID strings as they come up during a trace. If that becomes an issue, the two
approaches could be combined and messages could be added which would augment
the map in the header.

Also worth mentioning is that the proto2 version of the protobuf description
language does not support the "map" field type, and the protoc compiler on my
workstation doesn't support proto3. Because that's such an appropriate
representation for this data, the map is represented in an equivalent format
described in the proto3 documentation.

Change-Id: I137c8611c33d9ce6589e196d50c8638c1d88750c
Reviewed-on: https://gem5-review.googlesource.com/4782
Reviewed-by: Rahul Thakur <rjthakur@google.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem: Trace the request master ID in the MemTraceProbe.

There's a spot for it in the packet trace protobuf, so we should fill it
with something.

Change-Id: I784feb3f668e1b20d67b6ef98d012bcf59b7bd40
Reviewed-on: https://soc-sim-internal-review.googlesource.com/3483
Reviewed-by: Rahul Thakur <rjthakur@google.com>
Reviewed-on: https://gem5-review.googlesource.com/4781
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

mem: Record the request master ID in the PacketInfo structure.

That can be recorded in a packet trace.

Change-Id: I3813ab4ea5aadeb40b355ff01f10e8ecab2bb790
Reviewed-on: https://soc-sim-internal-review.googlesource.com/3482
Reviewed-by: Rahul Thakur <rjthakur@google.com>
Reviewed-on: https://gem5-review.googlesource.com/4780
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>

dev, virtio: Improvements to diod process handling

* When dispatching multiple gem5 simulations at once, they race
for the socket id, resulting in a panic when calling 'bind'. To
avoid this problem, the socket id is now created before the diod
process is created.  In case of a race, a panic is called in the
gem5 process, whereas before the panic was called in the diod
process where it didn't have any effect.

* In some cases killing the diod process in terminateDiod() using
only SIGTERM failed, so a call using SIGKILL is added.

Change-Id: Ie10741e10af52c8d255210cd4bfe0e5d761485d3
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/2821
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

alpha: Move some initialization logic from loadState into unserialize.

The primary difference between loadState and unserialize, at least when
eventually using the default SimObject implementation of loadState, is that
unserialize is called only if there's a corresponding section in the
checkpoint being restored. In this particular case, the AlphaProcess class
calls the generic Process unserialize function, and that does other critical
initialization like set up the processes page table. If the unserialize
function isn't called, other serious problems would break the simulation
anyway.

This removes the final custom implementation of loadState.

Change-Id: If50062392196bd37efd5ba04fd7aee6907b00dc6
Reviewed-on: https://gem5-review.googlesource.com/4741
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

sim: Stop using loadState in the Root SimObject.

The primary difference between using loadState and letting the default
implementation of loadState call unserialize is that whether or not that code
is called is dependent on that object being associated with a section in the
checkpoint file being unserialized. Since there's always a "root" object,
there should always be a section for it in the checkpoint and those should be
equivalent.

This removes one custom implementation of the loadState function.

Change-Id: Ia674ccc18e141f38746e22ccfddc21475b1a0731
Reviewed-on: https://gem5-review.googlesource.com/4740
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

kvm: arm: Get rid of functions which just wrap the subclasses version.

The MuxingKvmGic class defined a few functions related to checkpointing which
did nothing other than call the underlying Pl390 implementation. These are
unnecessary in general, and are particularly unnecessary for the loadState
function which is a very lightly used part of the checkpointing interface.
It's not actually defined in Pl390 either, and falls through to the
underlying implementation.

Change-Id: I84aae13d4966df0f4fdd1a72aee0bf1af01392ff
Reviewed-on: https://gem5-review.googlesource.com/4760
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

tlm: Don't set SystemC time resolution

Some simulators already set the time resolution of SystemC. By coupling
gem5 by means of SystemC with an other tool this can lead to problems:
When the resolution is set twice the simulation will not work.
Therefore, the line is changed to an assertion that checks if the time
resolution of the SystemC simulation is set to gem5's value of 1ps.

Change-Id: I8aafab9dd593eb4697a3c7f69ce181fd9cdd05c4
Reviewed-on: https://gem5-review.googlesource.com/4520
Reviewed-by: Paul Rosenfeld <prosenfeld@micron.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

stats: Move the swpipl function into the Alpha kernel stats.

This stat is only incremented by Alpha. Also move the _hwrei into the Alpha
stats object since it's the class that actually sets up and maintains that
value and it probably should have been there all along.

Change-Id: Ibd038a33230c01432c160490926d8e1e55f8ccb0
Reviewed-on: https://gem5-review.googlesource.com/4601
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

stats: Get rid of some kernel stats related cruft.

The kernel stat mechanism should really be refactored and moved somewhere
else, but in the mean time there's some old cruft that can be cleared away.

Change-Id: I21e725de590dda0d20bf3bc675bbe976c7b1bd86
Reviewed-on: https://gem5-review.googlesource.com/4600
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Fix bi-mode branch predictor thresholds

When different sizes were set for the choice and global saturation
counter (e.g. ex5_big), the threshold calculation used the wrong
size. Thus the branch predictor always predicted "not taken" for
choice > global.

Change-Id: I076549ff1482e2280cef24a0d16b7bb2122d4110
Reviewed-on: https://gem5-review.googlesource.com/4560
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

cpu-minor: Fix for addr range coverage calculation

Coverage was wrongly set to PartialAddrRangeCoverage in the case of
disjoint adjacent ranges

Change-Id: I29aaf5145e6cdcf5f0b8f4e009d57ee57bd4c944
Signed-off-by: Pau Cabre <pau.cabre@metempsy.com>
Reviewed-on: https://gem5-review.googlesource.com/4640
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

scons: bump required python version to 2.7 to support pybind11

Change-Id: Ic3652f975477f2e5d144e054489ab73ed9f82b55
Reviewed-on: https://gem5-review.googlesource.com/4440
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Joe Gross <joe.gross@amd.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Only increment SW PMU counters on writes to PMSWINC

When writing a bitmask of counters to PMSWINC, the PMU currently
increments the corresponding counters regardless of what they are
configured to count. According to the ARM ARM (D5.10.4), counters
should only be updated if they have been configured to count
software events (event type 0).

Change-Id: I5b2bc1fae55faa342b863721c9838342442831a9
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4285
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

arch-arm: Add missing override keywords in fault.hh

Change-Id: I94a4bf4a633aeed550f8c01ccae824add3b85eb0
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4284
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>

arch-x86: Add missing override in the X86 TLB

Change-Id: Ie5ef1aaaef46cf8ef8fa4b0fc8f7efb8cde9b489
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4283
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

arch-sparc: Add a FaultVals instantiation for VecDisabled

Recent gcc versions complain about a missing VecDisabled not having an
explicit FaultVals instantiation.

Change-Id: I439e7b3a7d5cad20590f52b3f374ead3f3f070a6
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4282
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arch-alpha: Add missing overrides

Change-Id: I3a52fcdb449c7df1612466270aa2c9b0a0f3afef
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4281
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

python: Make GlobalExitEvent.getCode() return an int

PyBind normally casts integers returned from the C to long in
Python. This is normally fine since long in most cases behaves just
like an int. However, when passing the return value from getcode() to
sys.exit, unexpected behavior ensues. Due to the way the function is
defined, any type other than int (with the exception of None) will be
treated as an error and be equivalent to sys.exit(1).

Since we frequently use the sys.exit(event.getCode()) pattern, we need
to ensure that the function returns an integer. This change adds an
explicit type conversion to a Python integer in the wrapper code.

Change-Id: I73d6b881025064afa2b2e6eb4512fa2a4b0a87da
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jose Marinho <jose.marinho@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4280
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Joe Gross <joe.gross@amd.com>

cpu-o3: fix data pkt initialization for split load

When a split load hits a memory region where IPRs are mapped, the
Writebackevent which is scheduled for that was carrying a data packet
that was not correctly initialized which caused an assertion to fire
when the Writeback event is processed.

Change-Id: I71a4e291f0086f7468d7e8124a0a8f098088972f
Signed-off-by: Matthias Hille <matthiashille8@gmail.com>
Reported-by: Matthias Hille <matthiashille8@gmail.com>
Reviewed-on: https://gem5-review.googlesource.com/4620
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

x86: Use the new CondInst format for moves to/from control registers.

The condition is whether the control register index is valid.

Change-Id: I8a225fcfd4955032b5bbf7d3392ee5bcc7d6bc64
Reviewed-on: https://gem5-review.googlesource.com/4581
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>

x86: Add a "CondInst" format for conditionally decoded instructions.

A condition can be specified which will tell the decoder whether to return
the instruction being requested, or, if the condition fails, UD2.

Change-Id: I0f1c075deb10754ce1dd88be1726a196294e41fd
Reviewed-on: https://gem5-review.googlesource.com/4580
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>
Maintainer: Gabe Black <gabeblack@google.com>

dev: Fix an IDE error check.

The error message says an IDE controller can support at most 4 disks, but the
check would fail if there were more than 3 disks.

Change-Id: Ic7d5d8c941fe2580da43019f53991377d4727bb9
Reviewed-on: https://gem5-review.googlesource.com/4460
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

mem-cache: Delete squashed HWPrefetches

Request and Packet for squashed HWPrefetches were not deleted

Change-Id: I9b66bb01b8ed6a5ddfaaa8739a68165dc4a7006c
Signed-off-by: Pau Cabre <pau.cabre@metempsy.com>
Reviewed-on: https://gem5-review.googlesource.com/4340
Maintainer: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>

configs, arm: Fix incorrect use of mem_range in bL example

The change "config: Change mem_range attribute naming in ARM
SimpleSystem" modified the SimpleSystem class to be compatible with
the MemConfig utility script. While doing so, the way we report the
memory ranges supported by the system changed, which broke the bL
example configration. This changeset introduces the necessary changes
to make the script work again.

Change-Id: I789987950ff04b6c5ae1c8b807355bcba34f6b3c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4380
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arm, config: Fix CPU names in ARM example configs

The ARM example configs used to rely on CPU aliases for the
AtomicSimpleCPU and KVM when configuring clusters. This broken when
support for CPU aliases was removed ('config: Remove support for CPU
aliases.'). This change updates the config scripts to use the full
class names instead.

Change-Id: If36c46207f39ca1897ecf77d9588f1c059819e63
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4360
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

base: Give more information when setting up asynchronous IO fails.

When asynchronous IO fails, gem5 currently just says it failed and quits, and
doesn't give any more information about which step failed, or what
specifically about it failed.

This change adds two helpers which will attempt the fcntl, check for error
conditions, and in the event of a failure, include a message describing the
error code and what the arguments to fcntl were.

Change-Id: I316478172ab2aefd3788279dbc12744791385cd5
Reviewed-on: https://gem5-review.googlesource.com/4320
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Gabe Black <gabeblack@google.com>

misc: git ignore file udpated

Change-Id: Ib2c7a7d26e7121dd082ca55a7c7ccf53fc47572c
Reviewed-on: https://gem5-review.googlesource.com/4240
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

style: Add shared gem5 headers to the style checker

Teach the style checker about common headers living in gem5/. These
should be included after any global library headers (e.g., C headers
or STL headers), but before the normal gem5 headers.

Change-Id: I322f841420e361c16314be8fa4cbd1e86d2bfa9f
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4300
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

util: Move m5op.h to the shared include directory

The header file with C declarations for m5ops is sometimes needed by
code outside of the util/m5 directory. Move this file to the shared
include directory and factor out flags to a generic asm header. Note
that applications that need to call m5ops still need to link with
libm5.a or implement their own trampolines.

Change-Id: I36a3f459ed71593e38b869dc2b1302c810f92276
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jose Marinho <jose.marinho@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4265
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

util, m5: Use consistent naming for m5op C symbols

Rename m5op C symbols to be prefixed all lower case, separated by
underscore, and prefixed by m5. This avoids potential name clashes for
short names such as arm.

Change-Id: Ic42f94d8a722661ef96c151d627e31eeb2e51490
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jose Marinho <jose.marinho@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4264
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arch-arm: Use named constants for m5op instructions

Change-Id: I544519c4f87e50cc02af29cbb3edc31ecf726e8e
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4263
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

sim: Use named constants for pseudo ops

Use named constants from a shared header instead of magic values when
handling pseudo ops.

Change-Id: If157060bbcd772ce7e8556482b44ca714f4319b1
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4262
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

util: Move the m5ops.h file to a shared directory

The header file m5ops.h contains a list of constants that should be
shared between the simulator and utilities. Move this header file to a
new top-level directory for shared files and rename constants to make
them suitable for inclusion in the main simulator.

The structure of the shared include directory is as follows:

include/gem5: Files that can be included from C code.
include/gem5/asm: Files that can be included from assembly code.
  asm/generic/: Files that aren't guest ISA specific
  asm/${isa}/: Files that are guest ISA specific

Change-Id: I1aa511057bcaa80cc2d566109ff26581558c4a41
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jose Marinho <jose.marinho@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4261
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

kvm, arm: Switch to the device EQ when accessing ISA devices

ISA devices typically run in the device event queue. Previously, we
assumed that devices would perform their own EQ migrations as
needed. This isn't ideal since it means we have different conventions
for IO devices and ISA devices. Switch to doing migrations in the KVM
CPU instead to make the behavior consistent.

Change-Id: I33b74480fb2126b0786dbdbfdcfa86083384250c
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4288
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

kvm: Add a helper method to access device event queues

The VM's event queue is normally used for devices in multi-core KVM
mode. Add a helper method, BaseKvmCPU::deviceEventQueue(), to access
this queue. This makes the intention of code migrating to device event
queues clearer.

Change-Id: Ifb10f553a6d7445c8d562f658cf9d0b1f4c577ff
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4287
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

cpu, kvm: Fix deadlock issue when resuming a drained system

The KVM CPU sometimes needs to access devices when drain() is
called. This typically happens on ARM when synchronizing devices that
use the system register interface. When called from drain(), the event
queue isn't locked since drain is called from the outside when the
simulator isn't servicing any events. In such cases, performing a
migration to the device's queue will unlock a mutex that isn't
locked. This typically results in a deadlock when resuming the system
since the lock will be in an undefined state.

Change-Id: Ibdcc2e034e916a929124f297e72aae306cf66728
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-by: Curtis Dunham <curtis.dunham@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4286
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arch-arm: Switch to DTOnly as the default machine type

Old ARM systems used to pass the machine type in the ATAGS list passed
to the kernel. This has been largely deprecated by the introduction of
device trees. Switch to the DTOnly machine type by default in gem5
since all new platforms and kernel will require this behavior.

Change-Id: Icfd085e4862863b4ef495566bfddbd11591866c3
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4260
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

config: Discover CPU timing models based on target ISA

The CpuConfig helper currently assumes that all timing models live in
the cores.arm package. This ignores the potential mismatch between the
target ISA and the ISA assumptions made by the timing models.

Instead of unconditionally listing all CPU models in cores.arm, list
timing models from cores.generic and cores.${TARGET_ISA}. This ensures
that the listed timing models support the ISA that gem5 is targeting.

Change-Id: If6235af2118889638f56ac4151003f38edfe9485
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3947
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

config, arm: SE configuration for the ARM starter kit

Add a full system example configuration for the ARM Research Starter
Kit on System Modeling. More information can be found at:
http://www.arm.com/ResearchEnablement/SystemModeling

Change-Id: Ia32a28eb713ba7050d790327ba6dbb73ec33b53a
Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com>
[ Minor cleanups and more documentation ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4203
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

config, arm: FS configuration for the ARM starter kit

Add a full system example configuration for the ARM Research Starter
Kit on System Modeling. More information can be found at:
http://www.arm.com/ResearchEnablement/SystemModeling

Change-Id: Ifa40419d21923a32bb383d58466e421fe4260ddd
Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com>
[ Minor cleanups and more documentation ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4202
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

config, arm: Add a high-performance in order timing model

The High-Performance In-order (HPI) CPU timing model is tuned to be
representative of a modern in-order ARMv8-A implementation. The HPI
core and its supporting simulation scripts, namely starter_se.py and
starter_fs.py (under /configs/example/arm/) are part of the ARM
Research Starter Kit on System Modeling. More information can be found
at: http://www.arm.com/ResearchEnablement/SystemModeling

Change-Id: I124bd06ba42d20abff09d447542b031d17eabe22
Signed-off-by: Ashkan Tousi <ashkan.tousimojarad@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4201
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

config: Change mem_range attribute naming in ARM SimpleSystem

MemConfig.config() expects memory ranges to be defined in a particular
way. This patch changes the naming of the mem_range attribute in
SympleSystem to enable use of MemConfig for configuring the memory.

Change-Id: I4964c136e53a99c69ff5e086cacb929aa435168d
Signed-off-by: Gabor Dozsa <gabor.dozsa@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4200
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

tests: Fix path for module imports in ARM system configs

Change-Id: I6fd660da3899de1f8c61bf012532ff0437467302
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4220
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

configs,sim-se: fix se.py multi-cpu multi-cmd issue

Assign different pids to the different commands specified with the "--cmd"
flag to configs/example/se.py

Without this change, the following command line triggers
a "fatal: _pid 100 is already used" error:

command=$PWD/tests/test-progs/hello/bin/arm/linux/hello
./build/ARM/gem5.opt configs/example/se.py -n 2 -c "$command;$command"

Change-Id: If6f726481eb196d4f42680b6aa46364fce4190ed
Signed-off-by: Pau Cabre <pau.cabre@metempsy.com>
Reviewed-on: https://gem5-review.googlesource.com/4160
Reviewed-by: Brandon Potter <Brandon.Potter@amd.com>
Maintainer: Brandon Potter <Brandon.Potter@amd.com>

sim: Prevent segfault in the wakeCpu m5op if id is invalid

Change-Id: I86229cedb206e10326cdee3f09a5c871e49c8d48
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3965

cpu: Add missing rename of vector registers in the O3 CPU

The introduction of a new vector register class broke rename in the O3
CPU due to an unhandled register class in
DefaultRename<Impl>::renameSrcRegs(). This patch fixes adds the
necessary handling to avoid a panic when the vector register file is
used.

Change-Id: Ie380ab35ec4a151db15402f25b25b58931ee0581
Reviewed-by: Giacomo Gabrielli <giacomo.gabrielli@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/4140
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu,o3: Fixed checkpointing bug occuring in the o3 CPU

Checkpointing a system with out-of-order CPUs might get stuck if
one of the CPUs has been put to sleep. The quiesce instruction
cannot get drained hence checkpointing never finishes.

This commit resolves that by activating all suspended thread
contexts when draining the system.

Change-Id: I817ab1672b4ead777bd8e12a0445829481c46fdc
Reviewed-by: Sascha Bischoff <sascha.bischoff@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3970
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

tests: Don't treat new stats as a cause for failures

We currently fail the stat diff stage of tests if there are new
stats. This is usually undesirable since this would require any change
that adds a stat to also update the regressions.

Change-Id: Ieadebac6fd17534e1b49b6b9a1d56f037a423325
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Nikos Nikoleris <nikos.nikoleris@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3962
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

sim, x86: Make clone a virtual function

This fixes the function call to clone in syscall_emul.hh where
the x86 version should be called before the base implementation
of clone.

Change-Id: Iccd2f680ff6e3a5536037d688a80ab3f236bbd98
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3902
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

x86: Add stats to X86 TLB

Change-Id: Iebf7d245de66eebc8d4c59e62e52adf6cf51e1e4
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3980
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

riscv: Define register index constants using literals

To make it clearer what the register indices are for the semantically
meaningful registers defined by src/arch/riscv/registers.hh, the
constants that were defined using other constants were changed to use
the literal values of those constants.  This also removes the need to
use the M5_VAR_USED attribute.

Change-Id: I7cccbe45d3d820deb5149a5925415735f6ae2e61
Reviewed-on: https://gem5-review.googlesource.com/4080
Reviewed-by: Gabe Black <gabeblack@google.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

riscv: Disambiguate between the C and C++ versions of isnan and isinf.

When both the C and C++ versions are visible, the compiler will complain that
it doesn't know which one to use. By specifying the std namespace, it will
know to use the C++ version.

Change-Id: Ie1bbe1d95eadbad9644b4915c21f924d7d5c0b22
Reviewed-on: https://gem5-review.googlesource.com/4060
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

tests: Upate RISC-V binaries and results

This patch updates the binaries and results for hello and insttest
regressions using the compressed extension.

Change-Id: I3d8f2248f490521d3e0dc05c48735cab82b1b04e
Reviewed-on: https://gem5-review.googlesource.com/4042
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

riscv: Fix bugs with RISC-V decoder and detailed CPUs

This patch fixes some bugs that were missed with the changes to the
decoder that enabled compatibility with compressed instructions. In
order to accommodate speculation with variable instruction widths, a few
assertions in decoder had to be changed to returning faults as the
specification describes should normally happen.  The rest of these
assertions will be changed in a later patch.

[Remove commented-out debugging line and add clarifying comment to
registerName in utility.hh.]

Change-Id: I3f333008430d4a905cb59547a3513f5149b43b95
Reviewed-on: https://gem5-review.googlesource.com/4041
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

riscv: Add unused attribute to some registers.hh constants

Three of the constants defined in arch/riscv/registers.hh
(ReturnValueReg, SyscallNumReg, and SyscallPseudoReturnReg) may cause
the compiler to warn that they are unused, which results in an error.
This patch adds M5_VAR_USED attributes to them to stop this.

Change-Id: Ie6389a55e8ffb3d003a47d02e76bdf9fb5219457
Reviewed-on: https://gem5-review.googlesource.com/4040
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

arch-arm: fix ldm of pc interswitching branch

The LDM instruction that loads to the PC causes a branch to the
instruction. In ARMv5T+ the branch can interswitch Thumb and ARM modes.
The interswitch is broken prior to this commit, with LDM to the PC
ignoring the switch.

Change-Id: I6aad073206743f3435c9923e3e2218bfe32c7e05
Reviewed-on: https://gem5-review.googlesource.com/3520
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

ruby: Refactor some Event subclasses to lambdas

Change-Id: I9f47a20a869553515a759d9a29c05f6ce4b42d64
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3930
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arm: Refactor some Event subclasses to lambdas

Change-Id: Ic59add8afee1d49633634272d9687a4b1558537e
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3929
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

dev: Refactor some Event subclasses to lambdas

Change-Id: I965d31ff8ad1658b03a902bf4244d7d0977b0466
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3928
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

net: Refactor some Event subclasses to lambdas

Change-Id: I0e23f1529b26c36d749bf5211ee8623744d0b10f
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3927
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>

testers: Refactor some Event subclasses to lambdas

Change-Id: I897b6162a827216b7bad74d955c0e50e06a5a3ec
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3926
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

kvm, mem: Refactor some Event subclasses into lambdas

Change-Id: Ifafdcf4692d58a17f90e66ff8de8fa3e146c34bb
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3924
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu: Refactor some Event subclasses to lambdas

Change-Id: If765c6100d67556f157e4e61aa33c2b7eeb8d2f0
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3923
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Jason Lowe-Power <jason@lowepower.com>

gpu-compute: Refactor some Event subclasses to lambdas

Change-Id: Ic1332b8e8ba0afacbe591c80f4d06afbf5f04bd9
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3922
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>
Maintainer: Anthony Gutierrez <anthony.gutierrez@amd.com>

sim, gdb: Refactor some Event subclasses into lambdas

Change-Id: If3e4329204f27eda96b50ec6ac279ebc6ef23d99
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3921
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

mips, x86: Refactor some Event subclasses into lambdas

Change-Id: I09570e569efe55f5502bc201e03456738999e714
Signed-off-by: Sean Wilson <spwilson2@wisc.edu>
Reviewed-on: https://gem5-review.googlesource.com/3920
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

util,arch-arm: Added python script to generate ARM FS binaries

This python script builds the bootloaders, kernels and DTBs for the
VExpress_GEM5_V1 (aarch32/aarch64), VExpress_EMM and VExpress_EMM64
platforms (it checkouts some linux kernel repositories when needed).

This is the result of this e-mail thread in gem5-dev mailing list:
http://www.mail-archive.com/gem5-dev@gem5.org/msg22406.html

Change-Id: Ida8f9b974f7188f48be8f84f14828a1973d6d256
Signed-off-by: Pau Cabre <pau.cabre@metempsy.com>
Reviewed-on: https://gem5-review.googlesource.com/3945
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Andreas Sandberg <andreas.sandberg@arm.com>
Maintainer: Andreas Sandberg <andreas.sandberg@arm.com>

cpu, sim: Add param to force CPUs to wait for GDB

By setting the BaseCPU parameter wait_for_dbg_connection, the GDB
server blocks during initialisation waiting for the remote debugger to
connect before starting the simulated CPU.

Change-Id: I4d62c68ce9adf69344bccbb44f66e30b33715a1c
[ Update info message to include remote GDB port, rename param. ]
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3963
Reviewed-by: Gabe Black <gabeblack@google.com>
Reviewed-by: Anthony Gutierrez <anthony.gutierrez@amd.com>

arch-riscv,tests: Add insttests for RV64C

This patch adds instruction tests for the RV64C extension
implementation.  It also updates existing executables for the latest
riscv-tools now that they are compatible.

[Update for changes to parents.]

Change-Id: Id4cfd966a8cae39b0d728b02849622fd00ee7e0e
Reviewed-on: https://gem5-review.googlesource.com/3862
Maintainer: Jason Lowe-Power <jason@lowepower.com>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

arch-riscv: Add support for compressed extension RV64C

This patch adds compatibility with the 64-bit compressed extension to
the RISC-V ISA, RV64C.  Current versions of the toolchain may use
compressed instructions in glibc by default, which can only be
overridden by recompiling the entire toolchain (simply adding
"-march=rv64g" or "-march=rv64imafd" when compiling a binary is not
sufficient to use uncompressed instructions in glibc functions in the
binary).

[Update diassembly generation for new RegId type.]
[Rebase onto master.]

Change-Id: Ifd5a5ea746704ce7e1b111442c3eb84c509a98b4
Reviewed-on: https://gem5-review.googlesource.com/3860
Reviewed-by: Alec Roelke <ar4jc@virginia.edu>
Maintainer: Alec Roelke <ar4jc@virginia.edu>

arch-riscv: Restructure ISA description

This patch restructures the RISC-V ISA description to use fewer classes
and improve its ability to be extended with nonstandard extensions in
the future. It also cleans up the disassembly for some of the CSR and
system instructions by removing source and destination registers for
instructions that don't have any.

[Fix class UImmOp to have an "imm" member rather than "uimm".]
[Update disassembly generation for new RegId class.]

Change-Id: Iec1c782020126e5e8e73460b84e31c7b5a5971d9
Reviewed-on: https://gem5-review.googlesource.com/3800
Maintainer: Alec Roelke <ar4jc@virginia.edu>
Reviewed-by: Jason Lowe-Power <jason@lowepower.com>

dev-arm: Add ID registers to the GIC model

Implement GICD_IIDR, GICC_IIDR, GICD_PIDR0, GICD_PIDR1, GICD_PIDR2,
and GICD_PIDR3.

Change-Id: I4f6b5a6303907226e7d8e2f677543b3868c02e7b
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3961

arch-arm: Support PMU evens in the 0x4000-0x4040 range

ARMv8.1 added a second architected event range, 0x4000-0x4040. Events
in this range are discovered using the high word of PMCEID{0,1}_EL0

Change-Id: I4cd01264230e5da4c841268a7cf3e6bd307c7180
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3960

dev-arm: Don't unconditionally overwrite bootloader params

The bootloader arguments were previously defaulting to a predetermined
value even if initialized elsewhere in the platform config script.
This commit fixes this issue by not calling the default initialization
routine if the bootloader is already defined.

Change-Id: Id80af4762b52dc036da29430b2795bb30970a349
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3967

dev: Fix OnIdle test in DmaReadFifo

OnIdle() is never called since DMA active check is completely
opposite to what it should be. old active status should be 'true'
and new active status should be false for OnIdle to be called

Change-Id: I94eca50edbe96113190837c7f6e50a0d061158a6
Reported-by: Rohit Kurup <rohit.kurup@arm.com>
Signed-off-by: Rohit Kurup <rohit.kurup@arm.com>
Signed-off-by: Andreas Sandberg <andreas.sandberg@arm.com>
Reviewed-on: https://gem5-review.googlesource.com/3966
Reviewed-by: Michael LeBeane <Michael.Lebeane@amd.com>