.gitlab-ci/bare-metal/fastboot.sh

   1 #!/bin/bash
   2
   3 BM=$CI_PROJECT_DIR/install/bare-metal
   4
   5 if [ -z "$BM_SERIAL" -a -z "$BM_SERIAL_SCRIPT" ]; then
   6   echo "Must set BM_SERIAL OR BM_SERIAL_SCRIPT in your gitlab-runner config.toml [[runners]] environment"
   7   echo "BM_SERIAL:"
   8   echo "  This is the serial device to talk to for waiting for fastboot to be ready and logging from the kernel."
   9   echo "BM_SERIAL_SCRIPT:"
  10   echo "  This is a shell script to talk to for waiting for fastboot to be ready and logging from the kernel."
  11   exit 1
  12 fi
  13
  14 if [ -z "$BM_POWERUP" ]; then
  15   echo "Must set BM_POWERUP in your gitlab-runner config.toml [[runners]] environment"
  16   echo "This is a shell script that should reset the device and begin its boot sequence"
  17   echo "such that it pauses at fastboot."
  18   exit 1
  19 fi
  20
  21 if [ -z "$BM_POWERDOWN" ]; then
  22   echo "Must set BM_POWERDOWN in your gitlab-runner config.toml [[runners]] environment"
  23   echo "This is a shell script that should power off the device."
  24   exit 1
  25 fi
  26
  27 if [ -z "$BM_FASTBOOT_SERIAL" ]; then
  28   echo "Must set BM_FASTBOOT_SERIAL in your gitlab-runner config.toml [[runners]] environment"
  29   echo "This must be the a stable-across-resets fastboot serial number."
  30   exit 1
  31 fi
  32
  33 if [ -z "$BM_KERNEL" ]; then
  34   echo "Must set BM_KERNEL to your board's kernel vmlinuz or Image.gz in the job's variables:"
  35   exit 1
  36 fi
  37
  38 if [ -z "$BM_DTB" ]; then
  39   echo "Must set BM_DTB to your board's DTB file in the job's variables:"
  40   exit 1
  41 fi
  42
  43 if [ -z "$BM_ROOTFS" ]; then
  44   echo "Must set BM_ROOTFS to your board's rootfs directory in the job's variables:"
  45   exit 1
  46 fi
  47
  48 if [ -z "$BM_WEBDAV_IP" -o -z "$BM_WEBDAV_PORT" ]; then
  49   echo "BM_WEBDAV_IP and/or BM_WEBDAV_PORT is not set - no results will be uploaded from DUT!"
  50   WEBDAV_CMDLINE=""
  51 else
  52   WEBDAV_CMDLINE="webdav=http://$BM_WEBDAV_IP:$BM_WEBDAV_PORT"
  53 fi
  54
  55 set -ex
  56
  57 # Clear out any previous run's artifacts.
  58 rm -rf results/
  59 mkdir -p results
  60
  61 # Create the rootfs in a temp dir
  62 rsync -a --delete $BM_ROOTFS/ rootfs/
  63 . $BM/rootfs-setup.sh rootfs
  64
  65 # Finally, pack it up into a cpio rootfs.  Skip the vulkan CTS since none of
  66 # these devices use it and it would take up space in the initrd.
  67 pushd rootfs
  68 find -H | \
  69   egrep -v "external/(openglcts|vulkancts|amber|glslang|spirv-tools)" |
  70   egrep -v "traces-db|apitrace|renderdoc|python" | \
  71   cpio -H newc -o | \
  72   xz --check=crc32 -T4 - > $CI_PROJECT_DIR/rootfs.cpio.gz
  73 popd
  74
  75 cat $BM_KERNEL $BM_DTB > Image.gz-dtb
  76
  77 abootimg \
  78   --create artifacts/fastboot.img \
  79   -k Image.gz-dtb \
  80   -r rootfs.cpio.gz \
  81   -c cmdline="$BM_CMDLINE $WEBDAV_CMDLINE"
  82 rm Image.gz-dtb
  83
  84 # Start nginx to get results from DUT
  85 if [ -n "$WEBDAV_CMDLINE" ]; then
  86   ln -s `pwd`/results /results
  87   sed -i s/80/$BM_WEBDAV_PORT/g /etc/nginx/sites-enabled/default
  88   sed -i s/www-data/root/g /etc/nginx/nginx.conf
  89   nginx
  90 fi
  91
  92 export PATH=$BM:$PATH
  93
  94 # Start background command for talking to serial if we have one.
  95 if [ -n "$BM_SERIAL_SCRIPT" ]; then
  96   $BM_SERIAL_SCRIPT | tee results/serial-output.txt &
  97
  98   while [ ! -e results/serial-output.txt ]; do
  99     sleep 1
 100   done
 101 fi
 102
 103 $BM/fastboot_run.py \
 104   --dev="$BM_SERIAL" \
 105   --fbserial="$BM_FASTBOOT_SERIAL" \
 106   --powerup="$BM_POWERUP" \
 107   --powerdown="$BM_POWERDOWN"