2 # Copyright (C) 2014 Intel Corporation
4 # Permission is hereby granted, free of charge, to any person obtaining a
5 # copy of this software and associated documentation files (the "Software"),
6 # to deal in the Software without restriction, including without limitation
7 # the rights to use, copy, modify, merge, publish, distribute, sublicense,
8 # and/or sell copies of the Software, and to permit persons to whom the
9 # Software is furnished to do so, subject to the following conditions:
11 # The above copyright notice and this permission notice (including the next
12 # paragraph) shall be included in all copies or substantial portions of the
15 # THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
16 # IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
17 # FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
18 # THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
19 # LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
20 # FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS
24 # Jason Ekstrand (jason@jlekstrand.net)
26 from __future__
import print_function
28 from collections
import OrderedDict
30 from nir_opcodes
import type_sizes
35 # Convenience variables
42 # Written in the form (<search>, <replace>) where <search> is an expression
43 # and <replace> is either an expression or a value. An expression is
44 # defined as a tuple of the form ([~]<op>, <src0>, <src1>, <src2>, <src3>)
45 # where each source is either an expression or a value. A value can be
46 # either a numeric constant or a string representing a variable name.
48 # If the opcode in a search expression is prefixed by a '~' character, this
49 # indicates that the operation is inexact. Such operations will only get
50 # applied to SSA values that do not have the exact bit set. This should be
51 # used by by any optimizations that are not bit-for-bit exact. It should not,
52 # however, be used for backend-requested lowering operations as those need to
53 # happen regardless of precision.
55 # Variable names are specified as "[#]name[@type][(cond)][.swiz]" where:
56 # "#" indicates that the given variable will only match constants,
57 # type indicates that the given variable will only match values from ALU
58 # instructions with the given output type,
59 # (cond) specifies an additional condition function (see nir_search_helpers.h),
60 # swiz is a swizzle applied to the variable (only in the <replace> expression)
62 # For constants, you have to be careful to make sure that it is the right
63 # type because python is unaware of the source and destination types of the
66 # All expression types can have a bit-size specified. For opcodes, this
67 # looks like "op@32", for variables it is "a@32" or "a@uint32" to specify a
68 # type and size. In the search half of the expression this indicates that it
69 # should only match that particular bit-size. In the replace half of the
70 # expression this indicates that the constructed value should have that
73 # If the opcode in a replacement expression is prefixed by a '!' character,
74 # this indicated that the new expression will be marked exact.
76 # A special condition "many-comm-expr" can be used with expressions to note
77 # that the expression and its subexpressions have more commutative expressions
78 # than nir_replace_instr can handle. If this special condition is needed with
79 # another condition, the two can be separated by a comma (e.g.,
80 # "(many-comm-expr,is_used_once)").
82 # based on https://web.archive.org/web/20180105155939/http://forum.devmaster.net/t/fast-and-accurate-sine-cosine/9648
83 def lowered_sincos(c
):
84 x
= ('fsub', ('fmul', 2.0, ('ffract', ('fadd', ('fmul', 0.5 / pi
, a
), c
))), 1.0)
85 x
= ('fmul', ('fsub', x
, ('fmul', x
, ('fabs', x
))), 4.0)
86 return ('ffma', ('ffma', x
, ('fabs', x
), ('fneg', x
)), 0.225, x
)
88 def intBitsToFloat(i
):
89 return struct
.unpack('!f', struct
.pack('!I', i
))[0]
93 (('imul', a
, '#b@32(is_pos_power_of_two)'), ('ishl', a
, ('find_lsb', b
)), '!options->lower_bitops'),
94 (('imul', a
, '#b@32(is_neg_power_of_two)'), ('ineg', ('ishl', a
, ('find_lsb', ('iabs', b
)))), '!options->lower_bitops'),
95 (('ishl', a
, '#b@32'), ('imul', a
, ('ishl', 1, b
)), 'options->lower_bitops'),
97 (('unpack_64_2x32_split_x', ('imul_2x32_64(is_used_once)', a
, b
)), ('imul', a
, b
)),
98 (('unpack_64_2x32_split_x', ('umul_2x32_64(is_used_once)', a
, b
)), ('imul', a
, b
)),
99 (('imul_2x32_64', a
, b
), ('pack_64_2x32_split', ('imul', a
, b
), ('imul_high', a
, b
)), 'options->lower_mul_2x32_64'),
100 (('umul_2x32_64', a
, b
), ('pack_64_2x32_split', ('imul', a
, b
), ('umul_high', a
, b
)), 'options->lower_mul_2x32_64'),
105 (('udiv', a
, '#b@32(is_pos_power_of_two)'), ('ushr', a
, ('find_lsb', b
)), '!options->lower_bitops'),
106 (('idiv', a
, '#b@32(is_pos_power_of_two)'), ('imul', ('isign', a
), ('ushr', ('iabs', a
), ('find_lsb', b
))), 'options->lower_idiv'),
107 (('idiv', a
, '#b@32(is_neg_power_of_two)'), ('ineg', ('imul', ('isign', a
), ('ushr', ('iabs', a
), ('find_lsb', ('iabs', b
))))), 'options->lower_idiv'),
108 (('umod', a
, '#b(is_pos_power_of_two)'), ('iand', a
, ('isub', b
, 1))),
110 (('~fneg', ('fneg', a
)), a
),
111 (('ineg', ('ineg', a
)), a
),
112 (('fabs', ('fabs', a
)), ('fabs', a
)),
113 (('fabs', ('fneg', a
)), ('fabs', a
)),
114 (('fabs', ('u2f', a
)), ('u2f', a
)),
115 (('iabs', ('iabs', a
)), ('iabs', a
)),
116 (('iabs', ('ineg', a
)), ('iabs', a
)),
117 (('f2b', ('fneg', a
)), ('f2b', a
)),
118 (('i2b', ('ineg', a
)), ('i2b', a
)),
119 (('~fadd', a
, 0.0), a
),
121 (('usadd_4x8', a
, 0), a
),
122 (('usadd_4x8', a
, ~
0), ~
0),
123 (('~fadd', ('fmul', a
, b
), ('fmul', a
, c
)), ('fmul', a
, ('fadd', b
, c
))),
124 (('iadd', ('imul', a
, b
), ('imul', a
, c
)), ('imul', a
, ('iadd', b
, c
))),
125 (('~fadd', ('fneg', a
), a
), 0.0),
126 (('iadd', ('ineg', a
), a
), 0),
127 (('iadd', ('ineg', a
), ('iadd', a
, b
)), b
),
128 (('iadd', a
, ('iadd', ('ineg', a
), b
)), b
),
129 (('~fadd', ('fneg', a
), ('fadd', a
, b
)), b
),
130 (('~fadd', a
, ('fadd', ('fneg', a
), b
)), b
),
131 (('fadd', ('fsat', a
), ('fsat', ('fneg', a
))), ('fsat', ('fabs', a
))),
132 (('~fmul', a
, 0.0), 0.0),
134 (('umul_unorm_4x8', a
, 0), 0),
135 (('umul_unorm_4x8', a
, ~
0), a
),
136 (('~fmul', a
, 1.0), a
),
138 (('fmul', a
, -1.0), ('fneg', a
)),
139 (('imul', a
, -1), ('ineg', a
)),
140 # If a < 0: fsign(a)*a*a => -1*a*a => -a*a => abs(a)*a
141 # If a > 0: fsign(a)*a*a => 1*a*a => a*a => abs(a)*a
142 # If a == 0: fsign(a)*a*a => 0*0*0 => abs(0)*0
143 (('fmul', ('fsign', a
), ('fmul', a
, a
)), ('fmul', ('fabs', a
), a
)),
144 (('fmul', ('fmul', ('fsign', a
), a
), a
), ('fmul', ('fabs', a
), a
)),
145 (('~ffma', 0.0, a
, b
), b
),
146 (('~ffma', a
, b
, 0.0), ('fmul', a
, b
)),
147 (('ffma', 1.0, a
, b
), ('fadd', a
, b
)),
148 (('ffma', -1.0, a
, b
), ('fadd', ('fneg', a
), b
)),
149 (('~flrp', a
, b
, 0.0), a
),
150 (('~flrp', a
, b
, 1.0), b
),
151 (('~flrp', a
, a
, b
), a
),
152 (('~flrp', 0.0, a
, b
), ('fmul', a
, b
)),
154 # flrp(a, a + b, c) => a + flrp(0, b, c) => a + (b * c)
155 (('~flrp', a
, ('fadd(is_used_once)', a
, b
), c
), ('fadd', ('fmul', b
, c
), a
)),
156 (('~flrp@32', a
, ('fadd', a
, b
), c
), ('fadd', ('fmul', b
, c
), a
), 'options->lower_flrp32'),
157 (('~flrp@64', a
, ('fadd', a
, b
), c
), ('fadd', ('fmul', b
, c
), a
), 'options->lower_flrp64'),
159 (('~flrp@32', ('fadd', a
, b
), ('fadd', a
, c
), d
), ('fadd', ('flrp', b
, c
, d
), a
), 'options->lower_flrp32'),
160 (('~flrp@64', ('fadd', a
, b
), ('fadd', a
, c
), d
), ('fadd', ('flrp', b
, c
, d
), a
), 'options->lower_flrp64'),
162 (('~flrp@32', a
, ('fmul(is_used_once)', a
, b
), c
), ('fmul', ('flrp', 1.0, b
, c
), a
), 'options->lower_flrp32'),
163 (('~flrp@64', a
, ('fmul(is_used_once)', a
, b
), c
), ('fmul', ('flrp', 1.0, b
, c
), a
), 'options->lower_flrp64'),
165 (('~flrp', ('fmul(is_used_once)', a
, b
), ('fmul(is_used_once)', a
, c
), d
), ('fmul', ('flrp', b
, c
, d
), a
)),
167 (('~flrp', a
, b
, ('b2f', 'c@1')), ('bcsel', c
, b
, a
), 'options->lower_flrp32'),
168 (('~flrp', a
, 0.0, c
), ('fadd', ('fmul', ('fneg', a
), c
), a
)),
169 (('ftrunc', a
), ('bcsel', ('flt', a
, 0.0), ('fneg', ('ffloor', ('fabs', a
))), ('ffloor', ('fabs', a
))), 'options->lower_ftrunc'),
170 (('ffloor', a
), ('fsub', a
, ('ffract', a
)), 'options->lower_ffloor'),
171 (('fadd', a
, ('fneg', ('ffract', a
))), ('ffloor', a
), '!options->lower_ffloor'),
172 (('ffract', a
), ('fsub', a
, ('ffloor', a
)), 'options->lower_ffract'),
173 (('fceil', a
), ('fneg', ('ffloor', ('fneg', a
))), 'options->lower_fceil'),
174 (('~fadd', ('fmul', a
, ('fadd', 1.0, ('fneg', ('b2f', 'c@1')))), ('fmul', b
, ('b2f', c
))), ('bcsel', c
, b
, a
), 'options->lower_flrp32'),
175 (('~fadd@32', ('fmul', a
, ('fadd', 1.0, ('fneg', c
) )), ('fmul', b
, c
)), ('flrp', a
, b
, c
), '!options->lower_flrp32'),
176 (('~fadd@64', ('fmul', a
, ('fadd', 1.0, ('fneg', c
) )), ('fmul', b
, c
)), ('flrp', a
, b
, c
), '!options->lower_flrp64'),
177 # These are the same as the previous three rules, but it depends on
178 # 1-fsat(x) <=> fsat(1-x). See below.
179 (('~fadd@32', ('fmul', a
, ('fsat', ('fadd', 1.0, ('fneg', c
)))), ('fmul', b
, ('fsat', c
))), ('flrp', a
, b
, ('fsat', c
)), '!options->lower_flrp32'),
180 (('~fadd@64', ('fmul', a
, ('fsat', ('fadd', 1.0, ('fneg', c
)))), ('fmul', b
, ('fsat', c
))), ('flrp', a
, b
, ('fsat', c
)), '!options->lower_flrp64'),
182 (('~fadd', a
, ('fmul', ('b2f', 'c@1'), ('fadd', b
, ('fneg', a
)))), ('bcsel', c
, b
, a
), 'options->lower_flrp32'),
183 (('~fadd@32', a
, ('fmul', c
, ('fadd', b
, ('fneg', a
)))), ('flrp', a
, b
, c
), '!options->lower_flrp32'),
184 (('~fadd@64', a
, ('fmul', c
, ('fadd', b
, ('fneg', a
)))), ('flrp', a
, b
, c
), '!options->lower_flrp64'),
185 (('ffma', a
, b
, c
), ('fadd', ('fmul', a
, b
), c
), 'options->lower_ffma'),
186 (('~fadd', ('fmul', a
, b
), c
), ('ffma', a
, b
, c
), 'options->fuse_ffma'),
188 (('~fmul', ('fadd', ('iand', ('ineg', ('b2i32', 'a@bool')), ('fmul', b
, c
)), '#d'), '#e'),
189 ('bcsel', a
, ('fmul', ('fadd', ('fmul', b
, c
), d
), e
), ('fmul', d
, e
))),
191 (('fdph', a
, b
), ('fdot4', ('vec4', 'a.x', 'a.y', 'a.z', 1.0), b
), 'options->lower_fdph'),
193 (('fdot4', ('vec4', a
, b
, c
, 1.0), d
), ('fdph', ('vec3', a
, b
, c
), d
), '!options->lower_fdph'),
194 (('fdot4', ('vec4', a
, 0.0, 0.0, 0.0), b
), ('fmul', a
, b
)),
195 (('fdot4', ('vec4', a
, b
, 0.0, 0.0), c
), ('fdot2', ('vec2', a
, b
), c
)),
196 (('fdot4', ('vec4', a
, b
, c
, 0.0), d
), ('fdot3', ('vec3', a
, b
, c
), d
)),
198 (('fdot3', ('vec3', a
, 0.0, 0.0), b
), ('fmul', a
, b
)),
199 (('fdot3', ('vec3', a
, b
, 0.0), c
), ('fdot2', ('vec2', a
, b
), c
)),
201 (('fdot2', ('vec2', a
, 0.0), b
), ('fmul', a
, b
)),
202 (('fdot2', a
, 1.0), ('fadd', 'a.x', 'a.y')),
204 # Lower fdot to fsum when it is available
205 (('fdot2', a
, b
), ('fsum2', ('fmul', a
, b
)), 'options->lower_fdot'),
206 (('fdot3', a
, b
), ('fsum3', ('fmul', a
, b
)), 'options->lower_fdot'),
207 (('fdot4', a
, b
), ('fsum4', ('fmul', a
, b
)), 'options->lower_fdot'),
208 (('fsum2', a
), ('fadd', 'a.x', 'a.y'), 'options->lower_fdot'),
210 # If x >= 0 and x <= 1: fsat(1 - x) == 1 - fsat(x) trivially
211 # If x < 0: 1 - fsat(x) => 1 - 0 => 1 and fsat(1 - x) => fsat(> 1) => 1
212 # If x > 1: 1 - fsat(x) => 1 - 1 => 0 and fsat(1 - x) => fsat(< 0) => 0
213 (('~fadd', ('fneg(is_used_once)', ('fsat(is_used_once)', 'a(is_not_fmul)')), 1.0), ('fsat', ('fadd', 1.0, ('fneg', a
)))),
215 # 1 - ((1 - a) * (1 - b))
216 # 1 - (1 - a - b + a*b)
217 # 1 - 1 + a + b - a*b
222 (('~fadd@32', 1.0, ('fneg', ('fmul', ('fadd', 1.0, ('fneg', a
)), ('fadd', 1.0, ('fneg', b
))))),
223 ('flrp', b
, 1.0, a
), '!options->lower_flrp32'),
225 # (a * #b + #c) << #d
226 # ((a * #b) << #d) + (#c << #d)
227 # (a * (#b << #d)) + (#c << #d)
228 (('ishl', ('iadd', ('imul', a
, '#b'), '#c'), '#d'),
229 ('iadd', ('imul', a
, ('ishl', b
, d
)), ('ishl', c
, d
))),
233 (('ishl', ('imul', a
, '#b'), '#c'), ('imul', a
, ('ishl', b
, c
))),
236 # Care must be taken here. Shifts in NIR uses only the lower log2(bitsize)
237 # bits of the second source. These replacements must correctly handle the
238 # case where (b % bitsize) + (c % bitsize) >= bitsize.
239 for s
in [8, 16, 32, 64]:
242 ishl
= "ishl@{}".format(s
)
243 ishr
= "ishr@{}".format(s
)
244 ushr
= "ushr@{}".format(s
)
246 in_bounds
= ('ult', ('iadd', ('iand', b
, mask
), ('iand', c
, mask
)), s
)
248 optimizations
.extend([
249 ((ishl
, (ishl
, a
, '#b'), '#c'), ('bcsel', in_bounds
, (ishl
, a
, ('iadd', b
, c
)), 0)),
250 ((ushr
, (ushr
, a
, '#b'), '#c'), ('bcsel', in_bounds
, (ushr
, a
, ('iadd', b
, c
)), 0)),
252 # To get get -1 for large shifts of negative values, ishr must instead
253 # clamp the shift count to the maximum value.
254 ((ishr
, (ishr
, a
, '#b'), '#c'),
255 (ishr
, a
, ('imin', ('iadd', ('iand', b
, mask
), ('iand', c
, mask
)), s
- 1))),
258 # Optimize a pattern of address calculation created by DXVK where the offset is
259 # divided by 4 and then multipled by 4. This can be turned into an iand and the
260 # additions before can be reassociated to CSE the iand instruction.
261 for log2
in range(1, 7): # powers of two from 2 to 64
263 mask
= 0xffffffff & ~
(v
- 1)
264 b_is_multiple
= '#b(is_unsigned_multiple_of_{})'.format(v
)
266 optimizations
.extend([
267 # 'a >> #b << #b' -> 'a & ~((1 << #b) - 1)'
268 (('ishl@32', ('ushr@32', a
, log2
), log2
), ('iand', a
, mask
)),
270 # Reassociate for improved CSE
271 (('iand@32', ('iadd@32', a
, b_is_multiple
), mask
), ('iadd', ('iand', a
, mask
), b
)),
274 optimizations
.extend([
275 # This is common for address calculations. Reassociating may enable the
276 # 'a<<c' to be CSE'd. It also helps architectures that have an ISHLADD
277 # instruction or a constant offset field for in load / store instructions.
278 (('ishl', ('iadd', a
, '#b'), '#c'), ('iadd', ('ishl', a
, c
), ('ishl', b
, c
))),
280 # Comparison simplifications
281 (('~inot', ('flt', a
, b
)), ('fge', a
, b
)),
282 (('~inot', ('fge', a
, b
)), ('flt', a
, b
)),
283 (('inot', ('feq', a
, b
)), ('fne', a
, b
)),
284 (('inot', ('fne', a
, b
)), ('feq', a
, b
)),
285 (('inot', ('ilt', a
, b
)), ('ige', a
, b
)),
286 (('inot', ('ult', a
, b
)), ('uge', a
, b
)),
287 (('inot', ('ige', a
, b
)), ('ilt', a
, b
)),
288 (('inot', ('uge', a
, b
)), ('ult', a
, b
)),
289 (('inot', ('ieq', a
, b
)), ('ine', a
, b
)),
290 (('inot', ('ine', a
, b
)), ('ieq', a
, b
)),
292 (('iand', ('feq', a
, b
), ('fne', a
, b
)), False),
293 (('iand', ('flt', a
, b
), ('flt', b
, a
)), False),
294 (('iand', ('ieq', a
, b
), ('ine', a
, b
)), False),
295 (('iand', ('ilt', a
, b
), ('ilt', b
, a
)), False),
296 (('iand', ('ult', a
, b
), ('ult', b
, a
)), False),
298 # This helps some shaders because, after some optimizations, they end up
299 # with patterns like (-a < -b) || (b < a). In an ideal world, this sort of
300 # matching would be handled by CSE.
301 (('flt', ('fneg', a
), ('fneg', b
)), ('flt', b
, a
)),
302 (('fge', ('fneg', a
), ('fneg', b
)), ('fge', b
, a
)),
303 (('feq', ('fneg', a
), ('fneg', b
)), ('feq', b
, a
)),
304 (('fne', ('fneg', a
), ('fneg', b
)), ('fne', b
, a
)),
305 (('flt', ('fneg', a
), -1.0), ('flt', 1.0, a
)),
306 (('flt', -1.0, ('fneg', a
)), ('flt', a
, 1.0)),
307 (('fge', ('fneg', a
), -1.0), ('fge', 1.0, a
)),
308 (('fge', -1.0, ('fneg', a
)), ('fge', a
, 1.0)),
309 (('fne', ('fneg', a
), -1.0), ('fne', 1.0, a
)),
310 (('feq', -1.0, ('fneg', a
)), ('feq', a
, 1.0)),
312 (('flt', ('fsat(is_used_once)', a
), '#b(is_gt_0_and_lt_1)'), ('flt', a
, b
)),
313 (('flt', '#b(is_gt_0_and_lt_1)', ('fsat(is_used_once)', a
)), ('flt', b
, a
)),
314 (('fge', ('fsat(is_used_once)', a
), '#b(is_gt_0_and_lt_1)'), ('fge', a
, b
)),
315 (('fge', '#b(is_gt_0_and_lt_1)', ('fsat(is_used_once)', a
)), ('fge', b
, a
)),
316 (('feq', ('fsat(is_used_once)', a
), '#b(is_gt_0_and_lt_1)'), ('feq', a
, b
)),
317 (('fne', ('fsat(is_used_once)', a
), '#b(is_gt_0_and_lt_1)'), ('fne', a
, b
)),
319 (('fge', ('fsat(is_used_once)', a
), 1.0), ('fge', a
, 1.0)),
320 (('flt', ('fsat(is_used_once)', a
), 1.0), ('flt', a
, 1.0)),
321 (('fge', 0.0, ('fsat(is_used_once)', a
)), ('fge', 0.0, a
)),
322 (('flt', 0.0, ('fsat(is_used_once)', a
)), ('flt', 0.0, a
)),
326 # b2f(a) == 0.0 because b2f(a) can only be 0 or 1
328 (('fge', 0.0, ('b2f', 'a@1')), ('inot', a
)),
330 (('fge', ('fneg', ('b2f', 'a@1')), 0.0), ('inot', a
)),
332 (('fne', ('fadd', ('b2f', 'a@1'), ('b2f', 'b@1')), 0.0), ('ior', a
, b
)),
333 (('fne', ('fmax', ('b2f', 'a@1'), ('b2f', 'b@1')), 0.0), ('ior', a
, b
)),
334 (('fne', ('bcsel', a
, 1.0, ('b2f', 'b@1')) , 0.0), ('ior', a
, b
)),
335 (('fne', ('b2f', 'a@1'), ('fneg', ('b2f', 'b@1'))), ('ior', a
, b
)),
336 (('fne', ('fmul', ('b2f', 'a@1'), ('b2f', 'b@1')), 0.0), ('iand', a
, b
)),
337 (('fne', ('fmin', ('b2f', 'a@1'), ('b2f', 'b@1')), 0.0), ('iand', a
, b
)),
338 (('fne', ('bcsel', a
, ('b2f', 'b@1'), 0.0) , 0.0), ('iand', a
, b
)),
339 (('fne', ('fadd', ('b2f', 'a@1'), ('fneg', ('b2f', 'b@1'))), 0.0), ('ixor', a
, b
)),
340 (('fne', ('b2f', 'a@1') , ('b2f', 'b@1') ), ('ixor', a
, b
)),
341 (('fne', ('fneg', ('b2f', 'a@1')), ('fneg', ('b2f', 'b@1'))), ('ixor', a
, b
)),
342 (('feq', ('fadd', ('b2f', 'a@1'), ('b2f', 'b@1')), 0.0), ('inot', ('ior', a
, b
))),
343 (('feq', ('fmax', ('b2f', 'a@1'), ('b2f', 'b@1')), 0.0), ('inot', ('ior', a
, b
))),
344 (('feq', ('bcsel', a
, 1.0, ('b2f', 'b@1')) , 0.0), ('inot', ('ior', a
, b
))),
345 (('feq', ('b2f', 'a@1'), ('fneg', ('b2f', 'b@1'))), ('inot', ('ior', a
, b
))),
346 (('feq', ('fmul', ('b2f', 'a@1'), ('b2f', 'b@1')), 0.0), ('inot', ('iand', a
, b
))),
347 (('feq', ('fmin', ('b2f', 'a@1'), ('b2f', 'b@1')), 0.0), ('inot', ('iand', a
, b
))),
348 (('feq', ('bcsel', a
, ('b2f', 'b@1'), 0.0) , 0.0), ('inot', ('iand', a
, b
))),
349 (('feq', ('fadd', ('b2f', 'a@1'), ('fneg', ('b2f', 'b@1'))), 0.0), ('ieq', a
, b
)),
350 (('feq', ('b2f', 'a@1') , ('b2f', 'b@1') ), ('ieq', a
, b
)),
351 (('feq', ('fneg', ('b2f', 'a@1')), ('fneg', ('b2f', 'b@1'))), ('ieq', a
, b
)),
353 # -(b2f(a) + b2f(b)) < 0
354 # 0 < b2f(a) + b2f(b)
355 # 0 != b2f(a) + b2f(b) b2f must be 0 or 1, so the sum is non-negative
357 (('flt', ('fneg', ('fadd', ('b2f', 'a@1'), ('b2f', 'b@1'))), 0.0), ('ior', a
, b
)),
358 (('flt', 0.0, ('fadd', ('b2f', 'a@1'), ('b2f', 'b@1'))), ('ior', a
, b
)),
360 # -(b2f(a) + b2f(b)) >= 0
361 # 0 >= b2f(a) + b2f(b)
362 # 0 == b2f(a) + b2f(b) b2f must be 0 or 1, so the sum is non-negative
364 (('fge', ('fneg', ('fadd', ('b2f', 'a@1'), ('b2f', 'b@1'))), 0.0), ('inot', ('ior', a
, b
))),
365 (('fge', 0.0, ('fadd', ('b2f', 'a@1'), ('b2f', 'b@1'))), ('inot', ('ior', a
, b
))),
367 (('flt', a
, ('fneg', a
)), ('flt', a
, 0.0)),
368 (('fge', a
, ('fneg', a
)), ('fge', a
, 0.0)),
370 # Some optimizations (below) convert things like (a < b || c < b) into
371 # (min(a, c) < b). However, this interfers with the previous optimizations
372 # that try to remove comparisons with negated sums of b2f. This just
374 (('flt', ('fmin', c
, ('fneg', ('fadd', ('b2f', 'a@1'), ('b2f', 'b@1')))), 0.0),
375 ('ior', ('flt', c
, 0.0), ('ior', a
, b
))),
377 (('~flt', ('fadd', a
, b
), a
), ('flt', b
, 0.0)),
378 (('~fge', ('fadd', a
, b
), a
), ('fge', b
, 0.0)),
379 (('~feq', ('fadd', a
, b
), a
), ('feq', b
, 0.0)),
380 (('~fne', ('fadd', a
, b
), a
), ('fne', b
, 0.0)),
381 (('~flt', ('fadd(is_used_once)', a
, '#b'), '#c'), ('flt', a
, ('fadd', c
, ('fneg', b
)))),
382 (('~flt', ('fneg(is_used_once)', ('fadd(is_used_once)', a
, '#b')), '#c'), ('flt', ('fneg', ('fadd', c
, b
)), a
)),
383 (('~fge', ('fadd(is_used_once)', a
, '#b'), '#c'), ('fge', a
, ('fadd', c
, ('fneg', b
)))),
384 (('~fge', ('fneg(is_used_once)', ('fadd(is_used_once)', a
, '#b')), '#c'), ('fge', ('fneg', ('fadd', c
, b
)), a
)),
385 (('~feq', ('fadd(is_used_once)', a
, '#b'), '#c'), ('feq', a
, ('fadd', c
, ('fneg', b
)))),
386 (('~feq', ('fneg(is_used_once)', ('fadd(is_used_once)', a
, '#b')), '#c'), ('feq', ('fneg', ('fadd', c
, b
)), a
)),
387 (('~fne', ('fadd(is_used_once)', a
, '#b'), '#c'), ('fne', a
, ('fadd', c
, ('fneg', b
)))),
388 (('~fne', ('fneg(is_used_once)', ('fadd(is_used_once)', a
, '#b')), '#c'), ('fne', ('fneg', ('fadd', c
, b
)), a
)),
390 # Cannot remove the addition from ilt or ige due to overflow.
391 (('ieq', ('iadd', a
, b
), a
), ('ieq', b
, 0)),
392 (('ine', ('iadd', a
, b
), a
), ('ine', b
, 0)),
394 # fmin(-b2f(a), b) >= 0.0
395 # -b2f(a) >= 0.0 && b >= 0.0
396 # -b2f(a) == 0.0 && b >= 0.0 -b2f can only be 0 or -1, never >0
397 # b2f(a) == 0.0 && b >= 0.0
398 # a == False && b >= 0.0
401 # The fge in the second replacement is not a typo. I leave the proof that
402 # "fmin(-b2f(a), b) >= 0 <=> fmin(-b2f(a), b) == 0" as an exercise for the
404 (('fge', ('fmin', ('fneg', ('b2f', 'a@1')), 'b@1'), 0.0), ('iand', ('inot', a
), ('fge', b
, 0.0))),
405 (('feq', ('fmin', ('fneg', ('b2f', 'a@1')), 'b@1'), 0.0), ('iand', ('inot', a
), ('fge', b
, 0.0))),
407 (('feq', ('b2f', 'a@1'), 0.0), ('inot', a
)),
408 (('~fne', ('b2f', 'a@1'), 0.0), a
),
409 (('ieq', ('b2i', 'a@1'), 0), ('inot', a
)),
410 (('ine', ('b2i', 'a@1'), 0), a
),
412 (('fne', ('u2f', a
), 0.0), ('ine', a
, 0)),
413 (('feq', ('u2f', a
), 0.0), ('ieq', a
, 0)),
414 (('fge', ('u2f', a
), 0.0), True),
415 (('fge', 0.0, ('u2f', a
)), ('uge', 0, a
)), # ieq instead?
416 (('flt', ('u2f', a
), 0.0), False),
417 (('flt', 0.0, ('u2f', a
)), ('ult', 0, a
)), # ine instead?
418 (('fne', ('i2f', a
), 0.0), ('ine', a
, 0)),
419 (('feq', ('i2f', a
), 0.0), ('ieq', a
, 0)),
420 (('fge', ('i2f', a
), 0.0), ('ige', a
, 0)),
421 (('fge', 0.0, ('i2f', a
)), ('ige', 0, a
)),
422 (('flt', ('i2f', a
), 0.0), ('ilt', a
, 0)),
423 (('flt', 0.0, ('i2f', a
)), ('ilt', 0, a
)),
427 # fabs(a) != 0.0 because fabs(a) must be >= 0
429 (('~flt', 0.0, ('fabs', a
)), ('fne', a
, 0.0)),
433 (('~flt', ('fneg', ('fabs', a
)), 0.0), ('fne', a
, 0.0)),
436 # 0.0 == fabs(a) because fabs(a) must be >= 0
438 (('fge', 0.0, ('fabs', a
)), ('feq', a
, 0.0)),
442 (('fge', ('fneg', ('fabs', a
)), 0.0), ('feq', a
, 0.0)),
444 # (a >= 0.0) && (a <= 1.0) -> fsat(a) == a
445 (('iand', ('fge', a
, 0.0), ('fge', 1.0, a
)), ('feq', a
, ('fsat', a
)), '!options->lower_fsat'),
447 # (a < 0.0) || (a > 1.0)
448 # !(!(a < 0.0) && !(a > 1.0))
449 # !((a >= 0.0) && (a <= 1.0))
452 (('ior', ('flt', a
, 0.0), ('flt', 1.0, a
)), ('fne', a
, ('fsat', a
)), '!options->lower_fsat'),
454 (('fmax', ('b2f(is_used_once)', 'a@1'), ('b2f', 'b@1')), ('b2f', ('ior', a
, b
))),
455 (('fmax', ('fneg(is_used_once)', ('b2f(is_used_once)', 'a@1')), ('fneg', ('b2f', 'b@1'))), ('fneg', ('b2f', ('ior', a
, b
)))),
456 (('fmin', ('b2f(is_used_once)', 'a@1'), ('b2f', 'b@1')), ('b2f', ('iand', a
, b
))),
457 (('fmin', ('fneg(is_used_once)', ('b2f(is_used_once)', 'a@1')), ('fneg', ('b2f', 'b@1'))), ('fneg', ('b2f', ('iand', a
, b
)))),
460 # bcsel(a, fmin(b2f(a), b), fmin(b2f(a), b))
461 # bcsel(a, fmin(b2f(True), b), fmin(b2f(False), b))
462 # bcsel(a, fmin(1.0, b), fmin(0.0, b))
464 # Since b is a constant, constant folding will eliminate the fmin and the
465 # fmax. If b is > 1.0, the bcsel will be replaced with a b2f.
466 (('fmin', ('b2f', 'a@1'), '#b'), ('bcsel', a
, ('fmin', b
, 1.0), ('fmin', b
, 0.0))),
468 (('flt', ('fadd(is_used_once)', a
, ('fneg', b
)), 0.0), ('flt', a
, b
)),
470 (('fge', ('fneg', ('fabs', a
)), 0.0), ('feq', a
, 0.0)),
471 (('~bcsel', ('flt', b
, a
), b
, a
), ('fmin', a
, b
)),
472 (('~bcsel', ('flt', a
, b
), b
, a
), ('fmax', a
, b
)),
473 (('~bcsel', ('fge', a
, b
), b
, a
), ('fmin', a
, b
)),
474 (('~bcsel', ('fge', b
, a
), b
, a
), ('fmax', a
, b
)),
475 (('bcsel', ('i2b', a
), b
, c
), ('bcsel', ('ine', a
, 0), b
, c
)),
476 (('bcsel', ('inot', a
), b
, c
), ('bcsel', a
, c
, b
)),
477 (('bcsel', a
, ('bcsel', a
, b
, c
), d
), ('bcsel', a
, b
, d
)),
478 (('bcsel', a
, b
, ('bcsel', a
, c
, d
)), ('bcsel', a
, b
, d
)),
479 (('bcsel', a
, ('bcsel', b
, c
, d
), ('bcsel(is_used_once)', b
, c
, 'e')), ('bcsel', b
, c
, ('bcsel', a
, d
, 'e'))),
480 (('bcsel', a
, ('bcsel(is_used_once)', b
, c
, d
), ('bcsel', b
, c
, 'e')), ('bcsel', b
, c
, ('bcsel', a
, d
, 'e'))),
481 (('bcsel', a
, ('bcsel', b
, c
, d
), ('bcsel(is_used_once)', b
, 'e', d
)), ('bcsel', b
, ('bcsel', a
, c
, 'e'), d
)),
482 (('bcsel', a
, ('bcsel(is_used_once)', b
, c
, d
), ('bcsel', b
, 'e', d
)), ('bcsel', b
, ('bcsel', a
, c
, 'e'), d
)),
483 (('bcsel', a
, True, b
), ('ior', a
, b
)),
484 (('bcsel', a
, a
, b
), ('ior', a
, b
)),
485 (('bcsel', a
, b
, False), ('iand', a
, b
)),
486 (('bcsel', a
, b
, a
), ('iand', a
, b
)),
487 (('~fmin', a
, a
), a
),
488 (('~fmax', a
, a
), a
),
493 (('fmax', ('fmax', a
, b
), b
), ('fmax', a
, b
)),
494 (('umax', ('umax', a
, b
), b
), ('umax', a
, b
)),
495 (('imax', ('imax', a
, b
), b
), ('imax', a
, b
)),
496 (('fmin', ('fmin', a
, b
), b
), ('fmin', a
, b
)),
497 (('umin', ('umin', a
, b
), b
), ('umin', a
, b
)),
498 (('imin', ('imin', a
, b
), b
), ('imin', a
, b
)),
499 (('iand@32', a
, ('inot', ('ishr', a
, 31))), ('imax', a
, 0)),
500 (('fmin', a
, ('fneg', a
)), ('fneg', ('fabs', a
))),
501 (('imin', a
, ('ineg', a
)), ('ineg', ('iabs', a
))),
502 (('fmin', a
, ('fneg', ('fabs', a
))), ('fneg', ('fabs', a
))),
503 (('imin', a
, ('ineg', ('iabs', a
))), ('ineg', ('iabs', a
))),
504 (('~fmin', a
, ('fabs', a
)), a
),
505 (('imin', a
, ('iabs', a
)), a
),
506 (('~fmax', a
, ('fneg', ('fabs', a
))), a
),
507 (('imax', a
, ('ineg', ('iabs', a
))), a
),
508 (('fmax', a
, ('fabs', a
)), ('fabs', a
)),
509 (('imax', a
, ('iabs', a
)), ('iabs', a
)),
510 (('fmax', a
, ('fneg', a
)), ('fabs', a
)),
511 (('imax', a
, ('ineg', a
)), ('iabs', a
)),
512 (('~fmax', ('fabs', a
), 0.0), ('fabs', a
)),
513 (('~fmin', ('fmax', a
, 0.0), 1.0), ('fsat', a
), '!options->lower_fsat'),
514 (('~fmax', ('fmin', a
, 1.0), 0.0), ('fsat', a
), '!options->lower_fsat'),
515 (('~fmin', ('fmax', a
, -1.0), 0.0), ('fneg', ('fsat', ('fneg', a
))), '!options->lower_fsat'),
516 (('~fmax', ('fmin', a
, 0.0), -1.0), ('fneg', ('fsat', ('fneg', a
))), '!options->lower_fsat'),
517 (('fsat', ('fsign', a
)), ('b2f', ('flt', 0.0, a
))),
518 (('fsat', ('b2f', a
)), ('b2f', a
)),
519 (('fsat', a
), ('fmin', ('fmax', a
, 0.0), 1.0), 'options->lower_fsat'),
520 (('fsat', ('fsat', a
)), ('fsat', a
)),
521 (('fsat', ('fneg(is_used_once)', ('fadd(is_used_once)', a
, b
))), ('fsat', ('fadd', ('fneg', a
), ('fneg', b
))), '!options->lower_fsat'),
522 (('fsat', ('fneg(is_used_once)', ('fmul(is_used_once)', a
, b
))), ('fsat', ('fmul', ('fneg', a
), b
)), '!options->lower_fsat'),
523 (('fsat', ('fabs(is_used_once)', ('fmul(is_used_once)', a
, b
))), ('fsat', ('fmul', ('fabs', a
), ('fabs', b
))), '!options->lower_fsat'),
524 (('fmin', ('fmax', ('fmin', ('fmax', a
, b
), c
), b
), c
), ('fmin', ('fmax', a
, b
), c
)),
525 (('imin', ('imax', ('imin', ('imax', a
, b
), c
), b
), c
), ('imin', ('imax', a
, b
), c
)),
526 (('umin', ('umax', ('umin', ('umax', a
, b
), c
), b
), c
), ('umin', ('umax', a
, b
), c
)),
527 (('fmax', ('fsat', a
), '#b@32(is_zero_to_one)'), ('fsat', ('fmax', a
, b
))),
528 (('fmin', ('fsat', a
), '#b@32(is_zero_to_one)'), ('fsat', ('fmin', a
, b
))),
529 (('extract_u8', ('imin', ('imax', a
, 0), 0xff), 0), ('imin', ('imax', a
, 0), 0xff)),
530 (('~ior', ('flt(is_used_once)', a
, b
), ('flt', a
, c
)), ('flt', a
, ('fmax', b
, c
))),
531 (('~ior', ('flt(is_used_once)', a
, c
), ('flt', b
, c
)), ('flt', ('fmin', a
, b
), c
)),
532 (('~ior', ('fge(is_used_once)', a
, b
), ('fge', a
, c
)), ('fge', a
, ('fmin', b
, c
))),
533 (('~ior', ('fge(is_used_once)', a
, c
), ('fge', b
, c
)), ('fge', ('fmax', a
, b
), c
)),
534 (('~ior', ('flt', a
, '#b'), ('flt', a
, '#c')), ('flt', a
, ('fmax', b
, c
))),
535 (('~ior', ('flt', '#a', c
), ('flt', '#b', c
)), ('flt', ('fmin', a
, b
), c
)),
536 (('~ior', ('fge', a
, '#b'), ('fge', a
, '#c')), ('fge', a
, ('fmin', b
, c
))),
537 (('~ior', ('fge', '#a', c
), ('fge', '#b', c
)), ('fge', ('fmax', a
, b
), c
)),
538 (('~iand', ('flt(is_used_once)', a
, b
), ('flt', a
, c
)), ('flt', a
, ('fmin', b
, c
))),
539 (('~iand', ('flt(is_used_once)', a
, c
), ('flt', b
, c
)), ('flt', ('fmax', a
, b
), c
)),
540 (('~iand', ('fge(is_used_once)', a
, b
), ('fge', a
, c
)), ('fge', a
, ('fmax', b
, c
))),
541 (('~iand', ('fge(is_used_once)', a
, c
), ('fge', b
, c
)), ('fge', ('fmin', a
, b
), c
)),
542 (('~iand', ('flt', a
, '#b'), ('flt', a
, '#c')), ('flt', a
, ('fmin', b
, c
))),
543 (('~iand', ('flt', '#a', c
), ('flt', '#b', c
)), ('flt', ('fmax', a
, b
), c
)),
544 (('~iand', ('fge', a
, '#b'), ('fge', a
, '#c')), ('fge', a
, ('fmax', b
, c
))),
545 (('~iand', ('fge', '#a', c
), ('fge', '#b', c
)), ('fge', ('fmin', a
, b
), c
)),
547 (('ior', ('ilt(is_used_once)', a
, b
), ('ilt', a
, c
)), ('ilt', a
, ('imax', b
, c
))),
548 (('ior', ('ilt(is_used_once)', a
, c
), ('ilt', b
, c
)), ('ilt', ('imin', a
, b
), c
)),
549 (('ior', ('ige(is_used_once)', a
, b
), ('ige', a
, c
)), ('ige', a
, ('imin', b
, c
))),
550 (('ior', ('ige(is_used_once)', a
, c
), ('ige', b
, c
)), ('ige', ('imax', a
, b
), c
)),
551 (('ior', ('ult(is_used_once)', a
, b
), ('ult', a
, c
)), ('ult', a
, ('umax', b
, c
))),
552 (('ior', ('ult(is_used_once)', a
, c
), ('ult', b
, c
)), ('ult', ('umin', a
, b
), c
)),
553 (('ior', ('uge(is_used_once)', a
, b
), ('uge', a
, c
)), ('uge', a
, ('umin', b
, c
))),
554 (('ior', ('uge(is_used_once)', a
, c
), ('uge', b
, c
)), ('uge', ('umax', a
, b
), c
)),
555 (('iand', ('ilt(is_used_once)', a
, b
), ('ilt', a
, c
)), ('ilt', a
, ('imin', b
, c
))),
556 (('iand', ('ilt(is_used_once)', a
, c
), ('ilt', b
, c
)), ('ilt', ('imax', a
, b
), c
)),
557 (('iand', ('ige(is_used_once)', a
, b
), ('ige', a
, c
)), ('ige', a
, ('imax', b
, c
))),
558 (('iand', ('ige(is_used_once)', a
, c
), ('ige', b
, c
)), ('ige', ('imin', a
, b
), c
)),
559 (('iand', ('ult(is_used_once)', a
, b
), ('ult', a
, c
)), ('ult', a
, ('umin', b
, c
))),
560 (('iand', ('ult(is_used_once)', a
, c
), ('ult', b
, c
)), ('ult', ('umax', a
, b
), c
)),
561 (('iand', ('uge(is_used_once)', a
, b
), ('uge', a
, c
)), ('uge', a
, ('umax', b
, c
))),
562 (('iand', ('uge(is_used_once)', a
, c
), ('uge', b
, c
)), ('uge', ('umin', a
, b
), c
)),
564 # These derive from the previous patterns with the application of b < 0 <=>
565 # 0 < -b. The transformation should be applied if either comparison is
566 # used once as this ensures that the number of comparisons will not
567 # increase. The sources to the ior and iand are not symmetric, so the
568 # rules have to be duplicated to get this behavior.
569 (('~ior', ('flt(is_used_once)', 0.0, 'a@32'), ('flt', 'b@32', 0.0)), ('flt', 0.0, ('fmax', a
, ('fneg', b
)))),
570 (('~ior', ('flt', 0.0, 'a@32'), ('flt(is_used_once)', 'b@32', 0.0)), ('flt', 0.0, ('fmax', a
, ('fneg', b
)))),
571 (('~ior', ('fge(is_used_once)', 0.0, 'a@32'), ('fge', 'b@32', 0.0)), ('fge', 0.0, ('fmin', a
, ('fneg', b
)))),
572 (('~ior', ('fge', 0.0, 'a@32'), ('fge(is_used_once)', 'b@32', 0.0)), ('fge', 0.0, ('fmin', a
, ('fneg', b
)))),
573 (('~iand', ('flt(is_used_once)', 0.0, 'a@32'), ('flt', 'b@32', 0.0)), ('flt', 0.0, ('fmin', a
, ('fneg', b
)))),
574 (('~iand', ('flt', 0.0, 'a@32'), ('flt(is_used_once)', 'b@32', 0.0)), ('flt', 0.0, ('fmin', a
, ('fneg', b
)))),
575 (('~iand', ('fge(is_used_once)', 0.0, 'a@32'), ('fge', 'b@32', 0.0)), ('fge', 0.0, ('fmax', a
, ('fneg', b
)))),
576 (('~iand', ('fge', 0.0, 'a@32'), ('fge(is_used_once)', 'b@32', 0.0)), ('fge', 0.0, ('fmax', a
, ('fneg', b
)))),
578 # Common pattern like 'if (i == 0 || i == 1 || ...)'
579 (('ior', ('ieq', a
, 0), ('ieq', a
, 1)), ('uge', 1, a
)),
580 (('ior', ('uge', 1, a
), ('ieq', a
, 2)), ('uge', 2, a
)),
581 (('ior', ('uge', 2, a
), ('ieq', a
, 3)), ('uge', 3, a
)),
583 # The (i2f32, ...) part is an open-coded fsign. When that is combined with
584 # the bcsel, it's basically copysign(1.0, a). There is no copysign in NIR,
585 # so emit an open-coded version of that.
586 (('bcsel@32', ('feq', a
, 0.0), 1.0, ('i2f32', ('iadd', ('b2i32', ('flt', 0.0, 'a@32')), ('ineg', ('b2i32', ('flt', 'a@32', 0.0)))))),
587 ('ior', 0x3f800000, ('iand', a
, 0x80000000))),
589 (('ior', a
, ('ieq', a
, False)), True),
590 (('ior', a
, ('inot', a
)), -1),
592 (('ine', ('ineg', ('b2i32', 'a@1')), ('ineg', ('b2i32', 'b@1'))), ('ine', a
, b
)),
593 (('b2i32', ('ine', 'a@1', 'b@1')), ('b2i32', ('ixor', a
, b
))),
595 (('iand', ('ieq', 'a@32', 0), ('ieq', 'b@32', 0)), ('ieq', ('ior', 'a@32', 'b@32'), 0), '!options->lower_bitops'),
597 # These patterns can result when (a < b || a < c) => (a < min(b, c))
598 # transformations occur before constant propagation and loop-unrolling.
599 (('~flt', a
, ('fmax', b
, a
)), ('flt', a
, b
)),
600 (('~flt', ('fmin', a
, b
), a
), ('flt', b
, a
)),
601 (('~fge', a
, ('fmin', b
, a
)), True),
602 (('~fge', ('fmax', a
, b
), a
), True),
603 (('~flt', a
, ('fmin', b
, a
)), False),
604 (('~flt', ('fmax', a
, b
), a
), False),
605 (('~fge', a
, ('fmax', b
, a
)), ('fge', a
, b
)),
606 (('~fge', ('fmin', a
, b
), a
), ('fge', b
, a
)),
608 (('ilt', a
, ('imax', b
, a
)), ('ilt', a
, b
)),
609 (('ilt', ('imin', a
, b
), a
), ('ilt', b
, a
)),
610 (('ige', a
, ('imin', b
, a
)), True),
611 (('ige', ('imax', a
, b
), a
), True),
612 (('ult', a
, ('umax', b
, a
)), ('ult', a
, b
)),
613 (('ult', ('umin', a
, b
), a
), ('ult', b
, a
)),
614 (('uge', a
, ('umin', b
, a
)), True),
615 (('uge', ('umax', a
, b
), a
), True),
616 (('ilt', a
, ('imin', b
, a
)), False),
617 (('ilt', ('imax', a
, b
), a
), False),
618 (('ige', a
, ('imax', b
, a
)), ('ige', a
, b
)),
619 (('ige', ('imin', a
, b
), a
), ('ige', b
, a
)),
620 (('ult', a
, ('umin', b
, a
)), False),
621 (('ult', ('umax', a
, b
), a
), False),
622 (('uge', a
, ('umax', b
, a
)), ('uge', a
, b
)),
623 (('uge', ('umin', a
, b
), a
), ('uge', b
, a
)),
624 (('ult', a
, ('iand', b
, a
)), False),
625 (('ult', ('ior', a
, b
), a
), False),
626 (('uge', a
, ('iand', b
, a
)), True),
627 (('uge', ('ior', a
, b
), a
), True),
629 (('ilt', '#a', ('imax', '#b', c
)), ('ior', ('ilt', a
, b
), ('ilt', a
, c
))),
630 (('ilt', ('imin', '#a', b
), '#c'), ('ior', ('ilt', a
, c
), ('ilt', b
, c
))),
631 (('ige', '#a', ('imin', '#b', c
)), ('ior', ('ige', a
, b
), ('ige', a
, c
))),
632 (('ige', ('imax', '#a', b
), '#c'), ('ior', ('ige', a
, c
), ('ige', b
, c
))),
633 (('ult', '#a', ('umax', '#b', c
)), ('ior', ('ult', a
, b
), ('ult', a
, c
))),
634 (('ult', ('umin', '#a', b
), '#c'), ('ior', ('ult', a
, c
), ('ult', b
, c
))),
635 (('uge', '#a', ('umin', '#b', c
)), ('ior', ('uge', a
, b
), ('uge', a
, c
))),
636 (('uge', ('umax', '#a', b
), '#c'), ('ior', ('uge', a
, c
), ('uge', b
, c
))),
637 (('ilt', '#a', ('imin', '#b', c
)), ('iand', ('ilt', a
, b
), ('ilt', a
, c
))),
638 (('ilt', ('imax', '#a', b
), '#c'), ('iand', ('ilt', a
, c
), ('ilt', b
, c
))),
639 (('ige', '#a', ('imax', '#b', c
)), ('iand', ('ige', a
, b
), ('ige', a
, c
))),
640 (('ige', ('imin', '#a', b
), '#c'), ('iand', ('ige', a
, c
), ('ige', b
, c
))),
641 (('ult', '#a', ('umin', '#b', c
)), ('iand', ('ult', a
, b
), ('ult', a
, c
))),
642 (('ult', ('umax', '#a', b
), '#c'), ('iand', ('ult', a
, c
), ('ult', b
, c
))),
643 (('uge', '#a', ('umax', '#b', c
)), ('iand', ('uge', a
, b
), ('uge', a
, c
))),
644 (('uge', ('umin', '#a', b
), '#c'), ('iand', ('uge', a
, c
), ('uge', b
, c
))),
646 # Thanks to sign extension, the ishr(a, b) is negative if and only if a is
648 (('bcsel', ('ilt', a
, 0), ('ineg', ('ishr', a
, b
)), ('ishr', a
, b
)),
649 ('iabs', ('ishr', a
, b
))),
650 (('iabs', ('ishr', ('iabs', a
), b
)), ('ishr', ('iabs', a
), b
)),
652 (('fabs', ('slt', a
, b
)), ('slt', a
, b
)),
653 (('fabs', ('sge', a
, b
)), ('sge', a
, b
)),
654 (('fabs', ('seq', a
, b
)), ('seq', a
, b
)),
655 (('fabs', ('sne', a
, b
)), ('sne', a
, b
)),
656 (('slt', a
, b
), ('b2f', ('flt', a
, b
)), 'options->lower_scmp'),
657 (('sge', a
, b
), ('b2f', ('fge', a
, b
)), 'options->lower_scmp'),
658 (('seq', a
, b
), ('b2f', ('feq', a
, b
)), 'options->lower_scmp'),
659 (('sne', a
, b
), ('b2f', ('fne', a
, b
)), 'options->lower_scmp'),
660 (('seq', ('seq', a
, b
), 1.0), ('seq', a
, b
)),
661 (('seq', ('sne', a
, b
), 1.0), ('sne', a
, b
)),
662 (('seq', ('slt', a
, b
), 1.0), ('slt', a
, b
)),
663 (('seq', ('sge', a
, b
), 1.0), ('sge', a
, b
)),
664 (('sne', ('seq', a
, b
), 0.0), ('seq', a
, b
)),
665 (('sne', ('sne', a
, b
), 0.0), ('sne', a
, b
)),
666 (('sne', ('slt', a
, b
), 0.0), ('slt', a
, b
)),
667 (('sne', ('sge', a
, b
), 0.0), ('sge', a
, b
)),
668 (('seq', ('seq', a
, b
), 0.0), ('sne', a
, b
)),
669 (('seq', ('sne', a
, b
), 0.0), ('seq', a
, b
)),
670 (('seq', ('slt', a
, b
), 0.0), ('sge', a
, b
)),
671 (('seq', ('sge', a
, b
), 0.0), ('slt', a
, b
)),
672 (('sne', ('seq', a
, b
), 1.0), ('sne', a
, b
)),
673 (('sne', ('sne', a
, b
), 1.0), ('seq', a
, b
)),
674 (('sne', ('slt', a
, b
), 1.0), ('sge', a
, b
)),
675 (('sne', ('sge', a
, b
), 1.0), ('slt', a
, b
)),
676 (('fall_equal2', a
, b
), ('fmin', ('seq', 'a.x', 'b.x'), ('seq', 'a.y', 'b.y')), 'options->lower_vector_cmp'),
677 (('fall_equal3', a
, b
), ('seq', ('fany_nequal3', a
, b
), 0.0), 'options->lower_vector_cmp'),
678 (('fall_equal4', a
, b
), ('seq', ('fany_nequal4', a
, b
), 0.0), 'options->lower_vector_cmp'),
679 (('fany_nequal2', a
, b
), ('fmax', ('sne', 'a.x', 'b.x'), ('sne', 'a.y', 'b.y')), 'options->lower_vector_cmp'),
680 (('fany_nequal3', a
, b
), ('fsat', ('fdot3', ('sne', a
, b
), ('sne', a
, b
))), 'options->lower_vector_cmp'),
681 (('fany_nequal4', a
, b
), ('fsat', ('fdot4', ('sne', a
, b
), ('sne', a
, b
))), 'options->lower_vector_cmp'),
682 (('fne', ('fneg', a
), a
), ('fne', a
, 0.0)),
683 (('feq', ('fneg', a
), a
), ('feq', a
, 0.0)),
685 (('imul', ('b2i', 'a@1'), ('b2i', 'b@1')), ('b2i', ('iand', a
, b
))),
686 (('fmul', ('b2f', 'a@1'), ('b2f', 'b@1')), ('b2f', ('iand', a
, b
))),
687 (('fsat', ('fadd', ('b2f', 'a@1'), ('b2f', 'b@1'))), ('b2f', ('ior', a
, b
))),
688 (('iand', 'a@bool32', 1.0), ('b2f', a
)),
689 # True/False are ~0 and 0 in NIR. b2i of True is 1, and -1 is ~0 (True).
690 (('ineg', ('b2i32', 'a@32')), a
),
691 (('flt', ('fneg', ('b2f', 'a@1')), 0), a
), # Generated by TGSI KILL_IF.
692 # Comparison with the same args. Note that these are not done for
693 # the float versions because NaN always returns false on float
695 (('ilt', a
, a
), False),
696 (('ige', a
, a
), True),
697 (('ieq', a
, a
), True),
698 (('ine', a
, a
), False),
699 (('ult', a
, a
), False),
700 (('uge', a
, a
), True),
701 # Logical and bit operations
703 (('iand', a
, ~
0), a
),
707 (('ior', a
, True), True),
710 (('inot', ('inot', a
)), a
),
711 (('ior', ('iand', a
, b
), b
), b
),
712 (('ior', ('ior', a
, b
), b
), ('ior', a
, b
)),
713 (('iand', ('ior', a
, b
), b
), b
),
714 (('iand', ('iand', a
, b
), b
), ('iand', a
, b
)),
716 (('iand', ('inot', a
), ('inot', b
)), ('inot', ('ior', a
, b
))),
717 (('ior', ('inot', a
), ('inot', b
)), ('inot', ('iand', a
, b
))),
718 # Shift optimizations
725 (('iand', 0xff, ('ushr@32', a
, 24)), ('ushr', a
, 24)),
726 (('iand', 0xffff, ('ushr@32', a
, 16)), ('ushr', a
, 16)),
727 (('ior', ('ishl@16', a
, b
), ('ushr@16', a
, ('iadd', 16, ('ineg', b
)))), ('urol', a
, b
), '!options->lower_rotate'),
728 (('ior', ('ishl@16', a
, b
), ('ushr@16', a
, ('isub', 16, b
))), ('urol', a
, b
), '!options->lower_rotate'),
729 (('ior', ('ishl@32', a
, b
), ('ushr@32', a
, ('iadd', 32, ('ineg', b
)))), ('urol', a
, b
), '!options->lower_rotate'),
730 (('ior', ('ishl@32', a
, b
), ('ushr@32', a
, ('isub', 32, b
))), ('urol', a
, b
), '!options->lower_rotate'),
731 (('ior', ('ushr@16', a
, b
), ('ishl@16', a
, ('iadd', 16, ('ineg', b
)))), ('uror', a
, b
), '!options->lower_rotate'),
732 (('ior', ('ushr@16', a
, b
), ('ishl@16', a
, ('isub', 16, b
))), ('uror', a
, b
), '!options->lower_rotate'),
733 (('ior', ('ushr@32', a
, b
), ('ishl@32', a
, ('iadd', 32, ('ineg', b
)))), ('uror', a
, b
), '!options->lower_rotate'),
734 (('ior', ('ushr@32', a
, b
), ('ishl@32', a
, ('isub', 32, b
))), ('uror', a
, b
), '!options->lower_rotate'),
735 (('urol@16', a
, b
), ('ior', ('ishl', a
, b
), ('ushr', a
, ('isub', 16, b
))), 'options->lower_rotate'),
736 (('urol@32', a
, b
), ('ior', ('ishl', a
, b
), ('ushr', a
, ('isub', 32, b
))), 'options->lower_rotate'),
737 (('uror@16', a
, b
), ('ior', ('ushr', a
, b
), ('ishl', a
, ('isub', 16, b
))), 'options->lower_rotate'),
738 (('uror@32', a
, b
), ('ior', ('ushr', a
, b
), ('ishl', a
, ('isub', 32, b
))), 'options->lower_rotate'),
739 # Exponential/logarithmic identities
740 (('~fexp2', ('flog2', a
)), a
), # 2^lg2(a) = a
741 (('~flog2', ('fexp2', a
)), a
), # lg2(2^a) = a
742 (('fpow', a
, b
), ('fexp2', ('fmul', ('flog2', a
), b
)), 'options->lower_fpow'), # a^b = 2^(lg2(a)*b)
743 (('~fexp2', ('fmul', ('flog2', a
), b
)), ('fpow', a
, b
), '!options->lower_fpow'), # 2^(lg2(a)*b) = a^b
744 (('~fexp2', ('fadd', ('fmul', ('flog2', a
), b
), ('fmul', ('flog2', c
), d
))),
745 ('~fmul', ('fpow', a
, b
), ('fpow', c
, d
)), '!options->lower_fpow'), # 2^(lg2(a) * b + lg2(c) + d) = a^b * c^d
746 (('~fexp2', ('fmul', ('flog2', a
), 2.0)), ('fmul', a
, a
)),
747 (('~fexp2', ('fmul', ('flog2', a
), 4.0)), ('fmul', ('fmul', a
, a
), ('fmul', a
, a
))),
748 (('~fpow', a
, 1.0), a
),
749 (('~fpow', a
, 2.0), ('fmul', a
, a
)),
750 (('~fpow', a
, 4.0), ('fmul', ('fmul', a
, a
), ('fmul', a
, a
))),
751 (('~fpow', 2.0, a
), ('fexp2', a
)),
752 (('~fpow', ('fpow', a
, 2.2), 0.454545), a
),
753 (('~fpow', ('fabs', ('fpow', a
, 2.2)), 0.454545), ('fabs', a
)),
754 (('~fsqrt', ('fexp2', a
)), ('fexp2', ('fmul', 0.5, a
))),
755 (('~frcp', ('fexp2', a
)), ('fexp2', ('fneg', a
))),
756 (('~frsq', ('fexp2', a
)), ('fexp2', ('fmul', -0.5, a
))),
757 (('~flog2', ('fsqrt', a
)), ('fmul', 0.5, ('flog2', a
))),
758 (('~flog2', ('frcp', a
)), ('fneg', ('flog2', a
))),
759 (('~flog2', ('frsq', a
)), ('fmul', -0.5, ('flog2', a
))),
760 (('~flog2', ('fpow', a
, b
)), ('fmul', b
, ('flog2', a
))),
761 (('~fmul', ('fexp2(is_used_once)', a
), ('fexp2(is_used_once)', b
)), ('fexp2', ('fadd', a
, b
))),
762 (('bcsel', ('flt', a
, 0.0), 0.0, ('fsqrt', a
)), ('fsqrt', ('fmax', a
, 0.0))),
763 (('~fmul', ('fsqrt', a
), ('fsqrt', a
)), ('fabs',a
)),
764 # Division and reciprocal
765 (('~fdiv', 1.0, a
), ('frcp', a
)),
766 (('fdiv', a
, b
), ('fmul', a
, ('frcp', b
)), 'options->lower_fdiv'),
767 (('~frcp', ('frcp', a
)), a
),
768 (('~frcp', ('fsqrt', a
)), ('frsq', a
)),
769 (('fsqrt', a
), ('frcp', ('frsq', a
)), 'options->lower_fsqrt'),
770 (('~frcp', ('frsq', a
)), ('fsqrt', a
), '!options->lower_fsqrt'),
772 (('fsin', a
), lowered_sincos(0.5), 'options->lower_sincos'),
773 (('fcos', a
), lowered_sincos(0.75), 'options->lower_sincos'),
774 # Boolean simplifications
775 (('i2b32(is_used_by_if)', a
), ('ine32', a
, 0)),
776 (('i2b1(is_used_by_if)', a
), ('ine', a
, 0)),
777 (('ieq', a
, True), a
),
778 (('ine(is_not_used_by_if)', a
, True), ('inot', a
)),
779 (('ine', a
, False), a
),
780 (('ieq(is_not_used_by_if)', a
, False), ('inot', 'a')),
781 (('bcsel', a
, True, False), a
),
782 (('bcsel', a
, False, True), ('inot', a
)),
783 (('bcsel@32', a
, 1.0, 0.0), ('b2f', a
)),
784 (('bcsel@32', a
, 0.0, 1.0), ('b2f', ('inot', a
))),
785 (('bcsel@32', a
, -1.0, -0.0), ('fneg', ('b2f', a
))),
786 (('bcsel@32', a
, -0.0, -1.0), ('fneg', ('b2f', ('inot', a
)))),
787 (('bcsel', True, b
, c
), b
),
788 (('bcsel', False, b
, c
), c
),
789 (('bcsel', a
, ('b2f(is_used_once)', 'b@32'), ('b2f', 'c@32')), ('b2f', ('bcsel', a
, b
, c
))),
791 (('bcsel', a
, b
, b
), b
),
792 (('~fcsel', a
, b
, b
), b
),
794 # D3D Boolean emulation
795 (('bcsel', a
, -1, 0), ('ineg', ('b2i', 'a@1'))),
796 (('bcsel', a
, 0, -1), ('ineg', ('b2i', ('inot', a
)))),
797 (('iand', ('ineg', ('b2i', 'a@1')), ('ineg', ('b2i', 'b@1'))),
798 ('ineg', ('b2i', ('iand', a
, b
)))),
799 (('ior', ('ineg', ('b2i','a@1')), ('ineg', ('b2i', 'b@1'))),
800 ('ineg', ('b2i', ('ior', a
, b
)))),
801 (('ieq', ('ineg', ('b2i', 'a@1')), 0), ('inot', a
)),
802 (('ieq', ('ineg', ('b2i', 'a@1')), -1), a
),
803 (('ine', ('ineg', ('b2i', 'a@1')), 0), a
),
804 (('ine', ('ineg', ('b2i', 'a@1')), -1), ('inot', a
)),
805 (('iand', ('ineg', ('b2i', a
)), 1.0), ('b2f', a
)),
806 (('iand', ('ineg', ('b2i', a
)), 1), ('b2i', a
)),
808 # SM5 32-bit shifts are defined to use the 5 least significant bits
809 (('ishl', 'a@32', ('iand', 31, b
)), ('ishl', a
, b
)),
810 (('ishr', 'a@32', ('iand', 31, b
)), ('ishr', a
, b
)),
811 (('ushr', 'a@32', ('iand', 31, b
)), ('ushr', a
, b
)),
814 (('i2b32', ('b2i', 'a@32')), a
),
815 (('f2i', ('ftrunc', a
)), ('f2i', a
)),
816 (('f2u', ('ftrunc', a
)), ('f2u', a
)),
817 (('i2b', ('ineg', a
)), ('i2b', a
)),
818 (('i2b', ('iabs', a
)), ('i2b', a
)),
819 (('inot', ('f2b1', a
)), ('feq', a
, 0.0)),
821 # The C spec says, "If the value of the integral part cannot be represented
822 # by the integer type, the behavior is undefined." "Undefined" can mean
823 # "the conversion doesn't happen at all."
824 (('~i2f32', ('f2i32', 'a@32')), ('ftrunc', a
)),
826 # Ironically, mark these as imprecise because removing the conversions may
827 # preserve more precision than doing the conversions (e.g.,
828 # uint(float(0x81818181u)) == 0x81818200).
829 (('~f2i32', ('i2f', 'a@32')), a
),
830 (('~f2i32', ('u2f', 'a@32')), a
),
831 (('~f2u32', ('i2f', 'a@32')), a
),
832 (('~f2u32', ('u2f', 'a@32')), a
),
834 (('ffloor', 'a(is_integral)'), a
),
835 (('fceil', 'a(is_integral)'), a
),
836 (('ftrunc', 'a(is_integral)'), a
),
837 # fract(x) = x - floor(x), so fract(NaN) = NaN
838 (('~ffract', 'a(is_integral)'), 0.0),
839 (('fabs', 'a(is_not_negative)'), a
),
840 (('iabs', 'a(is_not_negative)'), a
),
841 (('fsat', 'a(is_not_positive)'), 0.0),
843 # Section 5.4.1 (Conversion and Scalar Constructors) of the GLSL 4.60 spec
846 # It is undefined to convert a negative floating-point value to an
849 # Assuming that (uint)some_float behaves like (uint)(int)some_float allows
850 # some optimizations in the i965 backend to proceed.
851 (('ige', ('f2u', a
), b
), ('ige', ('f2i', a
), b
)),
852 (('ige', b
, ('f2u', a
)), ('ige', b
, ('f2i', a
))),
853 (('ilt', ('f2u', a
), b
), ('ilt', ('f2i', a
), b
)),
854 (('ilt', b
, ('f2u', a
)), ('ilt', b
, ('f2i', a
))),
856 (('~fmin', 'a(is_not_negative)', 1.0), ('fsat', a
), '!options->lower_fsat'),
858 # The result of the multiply must be in [-1, 0], so the result of the ffma
860 (('flt', ('fadd', ('fmul', ('fsat', a
), ('fneg', ('fsat', a
))), 1.0), 0.0), False),
861 (('flt', ('fadd', ('fneg', ('fmul', ('fsat', a
), ('fsat', a
))), 1.0), 0.0), False),
862 (('fmax', ('fadd', ('fmul', ('fsat', a
), ('fneg', ('fsat', a
))), 1.0), 0.0), ('fadd', ('fmul', ('fsat', a
), ('fneg', ('fsat', a
))), 1.0)),
863 (('fmax', ('fadd', ('fneg', ('fmul', ('fsat', a
), ('fsat', a
))), 1.0), 0.0), ('fadd', ('fneg', ('fmul', ('fsat', a
), ('fsat', a
))), 1.0)),
865 (('fne', 'a(is_not_zero)', 0.0), True),
866 (('feq', 'a(is_not_zero)', 0.0), False),
868 # In this chart, + means value > 0 and - means value < 0.
870 # + >= + -> unknown 0 >= + -> false - >= + -> false
871 # + >= 0 -> true 0 >= 0 -> true - >= 0 -> false
872 # + >= - -> true 0 >= - -> true - >= - -> unknown
874 # Using grouping conceptually similar to a Karnaugh map...
876 # (+ >= 0, + >= -, 0 >= 0, 0 >= -) == (is_not_negative >= is_not_positive) -> true
877 # (0 >= +, - >= +) == (is_not_positive >= gt_zero) -> false
878 # (- >= +, - >= 0) == (lt_zero >= is_not_negative) -> false
880 # The flt / ilt cases just invert the expected result.
882 # The results expecting true, must be marked imprecise. The results
883 # expecting false are fine because NaN compared >= or < anything is false.
885 (('~fge', 'a(is_not_negative)', 'b(is_not_positive)'), True),
886 (('fge', 'a(is_not_positive)', 'b(is_gt_zero)'), False),
887 (('fge', 'a(is_lt_zero)', 'b(is_not_negative)'), False),
889 (('flt', 'a(is_not_negative)', 'b(is_not_positive)'), False),
890 (('~flt', 'a(is_not_positive)', 'b(is_gt_zero)'), True),
891 (('~flt', 'a(is_lt_zero)', 'b(is_not_negative)'), True),
893 (('ine', 'a(is_not_zero)', 0), True),
894 (('ieq', 'a(is_not_zero)', 0), False),
896 (('ige', 'a(is_not_negative)', 'b(is_not_positive)'), True),
897 (('ige', 'a(is_not_positive)', 'b(is_gt_zero)'), False),
898 (('ige', 'a(is_lt_zero)', 'b(is_not_negative)'), False),
900 (('ilt', 'a(is_not_negative)', 'b(is_not_positive)'), False),
901 (('ilt', 'a(is_not_positive)', 'b(is_gt_zero)'), True),
902 (('ilt', 'a(is_lt_zero)', 'b(is_not_negative)'), True),
904 (('ult', 0, 'a(is_gt_zero)'), True),
906 # Packing and then unpacking does nothing
907 (('unpack_64_2x32_split_x', ('pack_64_2x32_split', a
, b
)), a
),
908 (('unpack_64_2x32_split_y', ('pack_64_2x32_split', a
, b
)), b
),
909 (('pack_64_2x32_split', ('unpack_64_2x32_split_x', a
),
910 ('unpack_64_2x32_split_y', a
)), a
),
912 # Comparing two halves of an unpack separately. While this optimization
913 # should be correct for non-constant values, it's less obvious that it's
914 # useful in that case. For constant values, the pack will fold and we're
915 # guaranteed to reduce the whole tree to one instruction.
916 (('iand', ('ieq', ('unpack_32_2x16_split_x', a
), '#b'),
917 ('ieq', ('unpack_32_2x16_split_y', a
), '#c')),
918 ('ieq', a
, ('pack_32_2x16_split', b
, c
))),
921 (('ushr', 'a@16', 8), ('extract_u8', a
, 1), '!options->lower_extract_byte'),
922 (('ushr', 'a@32', 24), ('extract_u8', a
, 3), '!options->lower_extract_byte'),
923 (('ushr', 'a@64', 56), ('extract_u8', a
, 7), '!options->lower_extract_byte'),
924 (('ishr', 'a@16', 8), ('extract_i8', a
, 1), '!options->lower_extract_byte'),
925 (('ishr', 'a@32', 24), ('extract_i8', a
, 3), '!options->lower_extract_byte'),
926 (('ishr', 'a@64', 56), ('extract_i8', a
, 7), '!options->lower_extract_byte'),
927 (('iand', 0xff, a
), ('extract_u8', a
, 0), '!options->lower_extract_byte'),
929 # Useless masking before unpacking
930 (('unpack_half_2x16_split_x', ('iand', a
, 0xffff)), ('unpack_half_2x16_split_x', a
)),
931 (('unpack_32_2x16_split_x', ('iand', a
, 0xffff)), ('unpack_32_2x16_split_x', a
)),
932 (('unpack_64_2x32_split_x', ('iand', a
, 0xffffffff)), ('unpack_64_2x32_split_x', a
)),
933 (('unpack_half_2x16_split_y', ('iand', a
, 0xffff0000)), ('unpack_half_2x16_split_y', a
)),
934 (('unpack_32_2x16_split_y', ('iand', a
, 0xffff0000)), ('unpack_32_2x16_split_y', a
)),
935 (('unpack_64_2x32_split_y', ('iand', a
, 0xffffffff00000000)), ('unpack_64_2x32_split_y', a
)),
937 # Optimize half packing
938 (('ishl', ('pack_half_2x16', ('vec2', a
, 0)), 16), ('pack_half_2x16', ('vec2', 0, a
))),
939 (('ishr', ('pack_half_2x16', ('vec2', 0, a
)), 16), ('pack_half_2x16', ('vec2', a
, 0))),
941 (('iadd', ('pack_half_2x16', ('vec2', a
, 0)), ('pack_half_2x16', ('vec2', 0, b
))),
942 ('pack_half_2x16', ('vec2', a
, b
))),
943 (('ior', ('pack_half_2x16', ('vec2', a
, 0)), ('pack_half_2x16', ('vec2', 0, b
))),
944 ('pack_half_2x16', ('vec2', a
, b
))),
947 # After the ('extract_u8', a, 0) pattern, above, triggers, there will be
948 # patterns like those below.
949 for op
in ('ushr', 'ishr'):
950 optimizations
.extend([(('extract_u8', (op
, 'a@16', 8), 0), ('extract_u8', a
, 1))])
951 optimizations
.extend([(('extract_u8', (op
, 'a@32', 8 * i
), 0), ('extract_u8', a
, i
)) for i
in range(1, 4)])
952 optimizations
.extend([(('extract_u8', (op
, 'a@64', 8 * i
), 0), ('extract_u8', a
, i
)) for i
in range(1, 8)])
954 optimizations
.extend([(('extract_u8', ('extract_u16', a
, 1), 0), ('extract_u8', a
, 2))])
956 # After the ('extract_[iu]8', a, 3) patterns, above, trigger, there will be
957 # patterns like those below.
958 for op
in ('extract_u8', 'extract_i8'):
959 optimizations
.extend([((op
, ('ishl', 'a@16', 8), 1), (op
, a
, 0))])
960 optimizations
.extend([((op
, ('ishl', 'a@32', 24 - 8 * i
), 3), (op
, a
, i
)) for i
in range(2, -1, -1)])
961 optimizations
.extend([((op
, ('ishl', 'a@64', 56 - 8 * i
), 7), (op
, a
, i
)) for i
in range(6, -1, -1)])
963 optimizations
.extend([
965 (('ushr', ('ishl', 'a@32', 16), 16), ('extract_u16', a
, 0), '!options->lower_extract_word'),
966 (('ushr', 'a@32', 16), ('extract_u16', a
, 1), '!options->lower_extract_word'),
967 (('ishr', ('ishl', 'a@32', 16), 16), ('extract_i16', a
, 0), '!options->lower_extract_word'),
968 (('ishr', 'a@32', 16), ('extract_i16', a
, 1), '!options->lower_extract_word'),
969 (('iand', 0xffff, a
), ('extract_u16', a
, 0), '!options->lower_extract_word'),
972 (('ussub_4x8', a
, 0), a
),
973 (('ussub_4x8', a
, ~
0), 0),
974 # Lower all Subtractions first - they can get recombined later
975 (('fsub', a
, b
), ('fadd', a
, ('fneg', b
))),
976 (('isub', a
, b
), ('iadd', a
, ('ineg', b
))),
977 (('uabs_usub', a
, b
), ('bcsel', ('ult', a
, b
), ('ineg', ('isub', a
, b
)), ('isub', a
, b
))),
978 # This is correct. We don't need isub_sat because the result type is unsigned, so it cannot overflow.
979 (('uabs_isub', a
, b
), ('bcsel', ('ilt', a
, b
), ('ineg', ('isub', a
, b
)), ('isub', a
, b
))),
981 # Propagate negation up multiplication chains
982 (('fmul(is_used_by_non_fsat)', ('fneg', a
), b
), ('fneg', ('fmul', a
, b
))),
983 (('imul', ('ineg', a
), b
), ('ineg', ('imul', a
, b
))),
985 # Propagate constants up multiplication chains
986 (('~fmul(is_used_once)', ('fmul(is_used_once)', 'a(is_not_const)', 'b(is_not_const)'), '#c'), ('fmul', ('fmul', a
, c
), b
)),
987 (('imul(is_used_once)', ('imul(is_used_once)', 'a(is_not_const)', 'b(is_not_const)'), '#c'), ('imul', ('imul', a
, c
), b
)),
988 (('~fadd(is_used_once)', ('fadd(is_used_once)', 'a(is_not_const)', 'b(is_not_const)'), '#c'), ('fadd', ('fadd', a
, c
), b
)),
989 (('iadd(is_used_once)', ('iadd(is_used_once)', 'a(is_not_const)', 'b(is_not_const)'), '#c'), ('iadd', ('iadd', a
, c
), b
)),
991 # Reassociate constants in add/mul chains so they can be folded together.
992 # For now, we mostly only handle cases where the constants are separated by
993 # a single non-constant. We could do better eventually.
994 (('~fmul', '#a', ('fmul', 'b(is_not_const)', '#c')), ('fmul', ('fmul', a
, c
), b
)),
995 (('imul', '#a', ('imul', 'b(is_not_const)', '#c')), ('imul', ('imul', a
, c
), b
)),
996 (('~fadd', '#a', ('fadd', 'b(is_not_const)', '#c')), ('fadd', ('fadd', a
, c
), b
)),
997 (('~fadd', '#a', ('fneg', ('fadd', 'b(is_not_const)', '#c'))), ('fadd', ('fadd', a
, ('fneg', c
)), ('fneg', b
))),
998 (('iadd', '#a', ('iadd', 'b(is_not_const)', '#c')), ('iadd', ('iadd', a
, c
), b
)),
1000 # Drop mul-div by the same value when there's no wrapping.
1001 (('idiv', ('imul(no_signed_wrap)', a
, b
), b
), a
),
1004 (('bcsel', ('ige', ('find_lsb', a
), 0), ('find_lsb', a
), -1), ('find_lsb', a
)),
1005 (('bcsel', ('ige', ('ifind_msb', a
), 0), ('ifind_msb', a
), -1), ('ifind_msb', a
)),
1006 (('bcsel', ('ige', ('ufind_msb', a
), 0), ('ufind_msb', a
), -1), ('ufind_msb', a
)),
1008 (('bcsel', ('ine', a
, 0), ('find_lsb', a
), -1), ('find_lsb', a
)),
1009 (('bcsel', ('ine', a
, 0), ('ifind_msb', a
), -1), ('ifind_msb', a
)),
1010 (('bcsel', ('ine', a
, 0), ('ufind_msb', a
), -1), ('ufind_msb', a
)),
1012 (('bcsel', ('ine', a
, -1), ('ifind_msb', a
), -1), ('ifind_msb', a
)),
1015 (('fmod@16', a
, b
), ('fsub', a
, ('fmul', b
, ('ffloor', ('fdiv', a
, b
)))), 'options->lower_fmod'),
1016 (('fmod@32', a
, b
), ('fsub', a
, ('fmul', b
, ('ffloor', ('fdiv', a
, b
)))), 'options->lower_fmod'),
1017 (('frem', a
, b
), ('fsub', a
, ('fmul', b
, ('ftrunc', ('fdiv', a
, b
)))), 'options->lower_fmod'),
1018 (('uadd_carry@32', a
, b
), ('b2i', ('ult', ('iadd', a
, b
), a
)), 'options->lower_uadd_carry'),
1019 (('usub_borrow@32', a
, b
), ('b2i', ('ult', a
, b
)), 'options->lower_usub_borrow'),
1021 (('bitfield_insert', 'base', 'insert', 'offset', 'bits'),
1022 ('bcsel', ('ult', 31, 'bits'), 'insert',
1023 ('bfi', ('bfm', 'bits', 'offset'), 'insert', 'base')),
1024 'options->lower_bitfield_insert'),
1025 (('ihadd', a
, b
), ('iadd', ('iand', a
, b
), ('ishr', ('ixor', a
, b
), 1)), 'options->lower_hadd'),
1026 (('uhadd', a
, b
), ('iadd', ('iand', a
, b
), ('ushr', ('ixor', a
, b
), 1)), 'options->lower_hadd'),
1027 (('irhadd', a
, b
), ('isub', ('ior', a
, b
), ('ishr', ('ixor', a
, b
), 1)), 'options->lower_hadd'),
1028 (('urhadd', a
, b
), ('isub', ('ior', a
, b
), ('ushr', ('ixor', a
, b
), 1)), 'options->lower_hadd'),
1029 (('ihadd@64', a
, b
), ('iadd', ('iand', a
, b
), ('ishr', ('ixor', a
, b
), 1)), 'options->lower_hadd64 || (options->lower_int64_options & nir_lower_iadd64) != 0'),
1030 (('uhadd@64', a
, b
), ('iadd', ('iand', a
, b
), ('ushr', ('ixor', a
, b
), 1)), 'options->lower_hadd64 || (options->lower_int64_options & nir_lower_iadd64) != 0'),
1031 (('irhadd@64', a
, b
), ('isub', ('ior', a
, b
), ('ishr', ('ixor', a
, b
), 1)), 'options->lower_hadd64 || (options->lower_int64_options & nir_lower_iadd64) != 0'),
1032 (('urhadd@64', a
, b
), ('isub', ('ior', a
, b
), ('ushr', ('ixor', a
, b
), 1)), 'options->lower_hadd64 || (options->lower_int64_options & nir_lower_iadd64) != 0'),
1034 (('uadd_sat@64', a
, b
), ('bcsel', ('ult', ('iadd', a
, b
), a
), -1, ('iadd', a
, b
)), 'options->lower_add_sat || (options->lower_int64_options & nir_lower_iadd64) != 0'),
1035 (('uadd_sat', a
, b
), ('bcsel', ('ult', ('iadd', a
, b
), a
), -1, ('iadd', a
, b
)), 'options->lower_add_sat'),
1036 (('usub_sat', a
, b
), ('bcsel', ('ult', a
, b
), 0, ('isub', a
, b
)), 'options->lower_add_sat'),
1037 (('usub_sat@64', a
, b
), ('bcsel', ('ult', a
, b
), 0, ('isub', a
, b
)), 'options->lower_usub_sat64 || (options->lower_int64_options & nir_lower_iadd64) != 0'),
1039 # int64_t sum = a + b;
1041 # if (a < 0 && b < 0 && a < sum)
1043 # } else if (a >= 0 && b >= 0 && sum < a)
1047 # A couple optimizations are applied.
1049 # 1. a < sum => sum >= 0. This replacement works because it is known that
1050 # a < 0 and b < 0, so sum should also be < 0 unless there was
1053 # 2. sum < a => sum < 0. This replacement works because it is known that
1054 # a >= 0 and b >= 0, so sum should also be >= 0 unless there was
1057 # 3. Invert the second if-condition and swap the order of parameters for
1058 # the bcsel. !(a >= 0 && b >= 0 && sum < 0) becomes !(a >= 0) || !(b >=
1059 # 0) || !(sum < 0), and that becomes (a < 0) || (b < 0) || (sum >= 0)
1061 # On Intel Gen11, this saves ~11 instructions.
1062 (('iadd_sat@64', a
, b
), ('bcsel',
1063 ('iand', ('iand', ('ilt', a
, 0), ('ilt', b
, 0)), ('ige', ('iadd', a
, b
), 0)),
1066 ('ior', ('ior', ('ilt', a
, 0), ('ilt', b
, 0)), ('ige', ('iadd', a
, b
), 0)),
1068 0x7fffffffffffffff)),
1069 '(options->lower_int64_options & nir_lower_iadd64) != 0'),
1071 # int64_t sum = a - b;
1073 # if (a < 0 && b >= 0 && a < sum)
1075 # } else if (a >= 0 && b < 0 && a >= sum)
1079 # Optimizations similar to the iadd_sat case are applied here.
1080 (('isub_sat@64', a
, b
), ('bcsel',
1081 ('iand', ('iand', ('ilt', a
, 0), ('ige', b
, 0)), ('ige', ('isub', a
, b
), 0)),
1084 ('ior', ('ior', ('ilt', a
, 0), ('ige', b
, 0)), ('ige', ('isub', a
, b
), 0)),
1086 0x7fffffffffffffff)),
1087 '(options->lower_int64_options & nir_lower_iadd64) != 0'),
1089 # These are done here instead of in the backend because the int64 lowering
1090 # pass will make a mess of the patterns. The first patterns are
1091 # conditioned on nir_lower_minmax64 because it was not clear that it was
1092 # always an improvement on platforms that have real int64 support. No
1093 # shaders in shader-db hit this, so it was hard to say one way or the
1095 (('ilt', ('imax(is_used_once)', 'a@64', 'b@64'), 0), ('ilt', ('imax', ('unpack_64_2x32_split_y', a
), ('unpack_64_2x32_split_y', b
)), 0), '(options->lower_int64_options & nir_lower_minmax64) != 0'),
1096 (('ilt', ('imin(is_used_once)', 'a@64', 'b@64'), 0), ('ilt', ('imin', ('unpack_64_2x32_split_y', a
), ('unpack_64_2x32_split_y', b
)), 0), '(options->lower_int64_options & nir_lower_minmax64) != 0'),
1097 (('ige', ('imax(is_used_once)', 'a@64', 'b@64'), 0), ('ige', ('imax', ('unpack_64_2x32_split_y', a
), ('unpack_64_2x32_split_y', b
)), 0), '(options->lower_int64_options & nir_lower_minmax64) != 0'),
1098 (('ige', ('imin(is_used_once)', 'a@64', 'b@64'), 0), ('ige', ('imin', ('unpack_64_2x32_split_y', a
), ('unpack_64_2x32_split_y', b
)), 0), '(options->lower_int64_options & nir_lower_minmax64) != 0'),
1099 (('ilt', 'a@64', 0), ('ilt', ('unpack_64_2x32_split_y', a
), 0), '(options->lower_int64_options & nir_lower_icmp64) != 0'),
1100 (('ige', 'a@64', 0), ('ige', ('unpack_64_2x32_split_y', a
), 0), '(options->lower_int64_options & nir_lower_icmp64) != 0'),
1102 (('ine', 'a@64', 0), ('ine', ('ior', ('unpack_64_2x32_split_x', a
), ('unpack_64_2x32_split_y', a
)), 0), '(options->lower_int64_options & nir_lower_icmp64) != 0'),
1103 (('ieq', 'a@64', 0), ('ieq', ('ior', ('unpack_64_2x32_split_x', a
), ('unpack_64_2x32_split_y', a
)), 0), '(options->lower_int64_options & nir_lower_icmp64) != 0'),
1104 # 0u < uint(a) <=> uint(a) != 0u
1105 (('ult', 0, 'a@64'), ('ine', ('ior', ('unpack_64_2x32_split_x', a
), ('unpack_64_2x32_split_y', a
)), 0), '(options->lower_int64_options & nir_lower_icmp64) != 0'),
1107 # Alternative lowering that doesn't rely on bfi.
1108 (('bitfield_insert', 'base', 'insert', 'offset', 'bits'),
1109 ('bcsel', ('ult', 31, 'bits'),
1112 ('iand', 'base', ('inot', ('ishl', ('isub', ('ishl', 1, 'bits'), 1), 'offset'))),
1113 ('iand', ('ishl', 'insert', 'offset'), ('ishl', ('isub', ('ishl', 1, 'bits'), 1), 'offset'))))),
1114 'options->lower_bitfield_insert_to_shifts'),
1116 # Alternative lowering that uses bitfield_select.
1117 (('bitfield_insert', 'base', 'insert', 'offset', 'bits'),
1118 ('bcsel', ('ult', 31, 'bits'), 'insert',
1119 ('bitfield_select', ('bfm', 'bits', 'offset'), ('ishl', 'insert', 'offset'), 'base')),
1120 'options->lower_bitfield_insert_to_bitfield_select'),
1122 (('ibitfield_extract', 'value', 'offset', 'bits'),
1123 ('bcsel', ('ult', 31, 'bits'), 'value',
1124 ('ibfe', 'value', 'offset', 'bits')),
1125 'options->lower_bitfield_extract'),
1127 (('ubitfield_extract', 'value', 'offset', 'bits'),
1128 ('bcsel', ('ult', 31, 'bits'), 'value',
1129 ('ubfe', 'value', 'offset', 'bits')),
1130 'options->lower_bitfield_extract'),
1132 # Note that these opcodes are defined to only use the five least significant bits of 'offset' and 'bits'
1133 (('ubfe', 'value', 'offset', ('iand', 31, 'bits')), ('ubfe', 'value', 'offset', 'bits')),
1134 (('ubfe', 'value', ('iand', 31, 'offset'), 'bits'), ('ubfe', 'value', 'offset', 'bits')),
1135 (('ibfe', 'value', 'offset', ('iand', 31, 'bits')), ('ibfe', 'value', 'offset', 'bits')),
1136 (('ibfe', 'value', ('iand', 31, 'offset'), 'bits'), ('ibfe', 'value', 'offset', 'bits')),
1137 (('bfm', 'bits', ('iand', 31, 'offset')), ('bfm', 'bits', 'offset')),
1138 (('bfm', ('iand', 31, 'bits'), 'offset'), ('bfm', 'bits', 'offset')),
1140 (('ibitfield_extract', 'value', 'offset', 'bits'),
1141 ('bcsel', ('ieq', 0, 'bits'),
1144 ('ishl', 'value', ('isub', ('isub', 32, 'bits'), 'offset')),
1145 ('isub', 32, 'bits'))),
1146 'options->lower_bitfield_extract_to_shifts'),
1148 (('ubitfield_extract', 'value', 'offset', 'bits'),
1150 ('ushr', 'value', 'offset'),
1151 ('bcsel', ('ieq', 'bits', 32),
1153 ('isub', ('ishl', 1, 'bits'), 1))),
1154 'options->lower_bitfield_extract_to_shifts'),
1156 (('ifind_msb', 'value'),
1157 ('ufind_msb', ('bcsel', ('ilt', 'value', 0), ('inot', 'value'), 'value')),
1158 'options->lower_ifind_msb'),
1160 (('find_lsb', 'value'),
1161 ('ufind_msb', ('iand', 'value', ('ineg', 'value'))),
1162 'options->lower_find_lsb'),
1164 (('extract_i8', a
, 'b@32'),
1165 ('ishr', ('ishl', a
, ('imul', ('isub', 3, b
), 8)), 24),
1166 'options->lower_extract_byte'),
1168 (('extract_u8', a
, 'b@32'),
1169 ('iand', ('ushr', a
, ('imul', b
, 8)), 0xff),
1170 'options->lower_extract_byte'),
1172 (('extract_i16', a
, 'b@32'),
1173 ('ishr', ('ishl', a
, ('imul', ('isub', 1, b
), 16)), 16),
1174 'options->lower_extract_word'),
1176 (('extract_u16', a
, 'b@32'),
1177 ('iand', ('ushr', a
, ('imul', b
, 16)), 0xffff),
1178 'options->lower_extract_word'),
1180 (('pack_unorm_2x16', 'v'),
1181 ('pack_uvec2_to_uint',
1182 ('f2u32', ('fround_even', ('fmul', ('fsat', 'v'), 65535.0)))),
1183 'options->lower_pack_unorm_2x16'),
1185 (('pack_unorm_4x8', 'v'),
1186 ('pack_uvec4_to_uint',
1187 ('f2u32', ('fround_even', ('fmul', ('fsat', 'v'), 255.0)))),
1188 'options->lower_pack_unorm_4x8'),
1190 (('pack_snorm_2x16', 'v'),
1191 ('pack_uvec2_to_uint',
1192 ('f2i32', ('fround_even', ('fmul', ('fmin', 1.0, ('fmax', -1.0, 'v')), 32767.0)))),
1193 'options->lower_pack_snorm_2x16'),
1195 (('pack_snorm_4x8', 'v'),
1196 ('pack_uvec4_to_uint',
1197 ('f2i32', ('fround_even', ('fmul', ('fmin', 1.0, ('fmax', -1.0, 'v')), 127.0)))),
1198 'options->lower_pack_snorm_4x8'),
1200 (('unpack_unorm_2x16', 'v'),
1201 ('fdiv', ('u2f32', ('vec2', ('extract_u16', 'v', 0),
1202 ('extract_u16', 'v', 1))),
1204 'options->lower_unpack_unorm_2x16'),
1206 (('unpack_unorm_4x8', 'v'),
1207 ('fdiv', ('u2f32', ('vec4', ('extract_u8', 'v', 0),
1208 ('extract_u8', 'v', 1),
1209 ('extract_u8', 'v', 2),
1210 ('extract_u8', 'v', 3))),
1212 'options->lower_unpack_unorm_4x8'),
1214 (('unpack_snorm_2x16', 'v'),
1215 ('fmin', 1.0, ('fmax', -1.0, ('fdiv', ('i2f', ('vec2', ('extract_i16', 'v', 0),
1216 ('extract_i16', 'v', 1))),
1218 'options->lower_unpack_snorm_2x16'),
1220 (('unpack_snorm_4x8', 'v'),
1221 ('fmin', 1.0, ('fmax', -1.0, ('fdiv', ('i2f', ('vec4', ('extract_i8', 'v', 0),
1222 ('extract_i8', 'v', 1),
1223 ('extract_i8', 'v', 2),
1224 ('extract_i8', 'v', 3))),
1226 'options->lower_unpack_snorm_4x8'),
1228 (('pack_half_2x16_split', 'a@32', 'b@32'),
1229 ('ior', ('ishl', ('u2u32', ('f2f16', b
)), 16), ('u2u32', ('f2f16', a
))),
1230 'options->lower_pack_half_2x16_split'),
1232 (('unpack_half_2x16_split_x', 'a@32'),
1233 ('f2f32', ('u2u16', a
)),
1234 'options->lower_unpack_half_2x16_split'),
1236 (('unpack_half_2x16_split_y', 'a@32'),
1237 ('f2f32', ('u2u16', ('ushr', a
, 16))),
1238 'options->lower_unpack_half_2x16_split'),
1240 (('isign', a
), ('imin', ('imax', a
, -1), 1), 'options->lower_isign'),
1241 (('fsign', a
), ('fsub', ('b2f', ('flt', 0.0, a
)), ('b2f', ('flt', a
, 0.0))), 'options->lower_fsign'),
1243 # Address/offset calculations:
1244 # Drivers supporting imul24 should use the nir_lower_amul() pass, this
1245 # rule converts everyone else to imul:
1246 (('amul', a
, b
), ('imul', a
, b
), '!options->has_imul24'),
1248 (('imad24_ir3', a
, b
, 0), ('imul24', a
, b
)),
1249 (('imad24_ir3', a
, 0, c
), (c
)),
1250 (('imad24_ir3', a
, 1, c
), ('iadd', a
, c
)),
1252 # if first two srcs are const, crack apart the imad so constant folding
1253 # can clean up the imul:
1254 # TODO ffma should probably get a similar rule:
1255 (('imad24_ir3', '#a', '#b', c
), ('iadd', ('imul', a
, b
), c
)),
1257 # These will turn 24b address/offset calc back into 32b shifts, but
1258 # it should be safe to get back some of the bits of precision that we
1259 # already decided were no necessary:
1260 (('imul24', a
, '#b@32(is_pos_power_of_two)'), ('ishl', a
, ('find_lsb', b
)), '!options->lower_bitops'),
1261 (('imul24', a
, '#b@32(is_neg_power_of_two)'), ('ineg', ('ishl', a
, ('find_lsb', ('iabs', b
)))), '!options->lower_bitops'),
1262 (('imul24', a
, 0), (0)),
1265 # bit_size dependent lowerings
1266 for bit_size
in [8, 16, 32, 64]:
1267 # convenience constants
1268 intmax
= (1 << (bit_size
- 1)) - 1
1269 intmin
= 1 << (bit_size
- 1)
1272 (('iadd_sat@' + str(bit_size
), a
, b
),
1273 ('bcsel', ('ige', b
, 1), ('bcsel', ('ilt', ('iadd', a
, b
), a
), intmax
, ('iadd', a
, b
)),
1274 ('bcsel', ('ilt', a
, ('iadd', a
, b
)), intmin
, ('iadd', a
, b
))), 'options->lower_add_sat'),
1275 (('isub_sat@' + str(bit_size
), a
, b
),
1276 ('bcsel', ('ilt', b
, 0), ('bcsel', ('ilt', ('isub', a
, b
), a
), intmax
, ('isub', a
, b
)),
1277 ('bcsel', ('ilt', a
, ('isub', a
, b
)), intmin
, ('isub', a
, b
))), 'options->lower_add_sat'),
1280 invert
= OrderedDict([('feq', 'fne'), ('fne', 'feq')])
1282 for left
, right
in itertools
.combinations_with_replacement(invert
.keys(), 2):
1283 optimizations
.append((('inot', ('ior(is_used_once)', (left
, a
, b
), (right
, c
, d
))),
1284 ('iand', (invert
[left
], a
, b
), (invert
[right
], c
, d
))))
1285 optimizations
.append((('inot', ('iand(is_used_once)', (left
, a
, b
), (right
, c
, d
))),
1286 ('ior', (invert
[left
], a
, b
), (invert
[right
], c
, d
))))
1288 # Optimize x2bN(b2x(x)) -> x
1289 for size
in type_sizes('bool'):
1290 aN
= 'a@' + str(size
)
1291 f2bN
= 'f2b' + str(size
)
1292 i2bN
= 'i2b' + str(size
)
1293 optimizations
.append(((f2bN
, ('b2f', aN
)), a
))
1294 optimizations
.append(((i2bN
, ('b2i', aN
)), a
))
1296 # Optimize x2yN(b2x(x)) -> b2y
1297 for x
, y
in itertools
.product(['f', 'u', 'i'], ['f', 'u', 'i']):
1298 if x
!= 'f' and y
!= 'f' and x
!= y
:
1301 b2x
= 'b2f' if x
== 'f' else 'b2i'
1302 b2y
= 'b2f' if y
== 'f' else 'b2i'
1303 x2yN
= '{}2{}'.format(x
, y
)
1304 optimizations
.append(((x2yN
, (b2x
, a
)), (b2y
, a
)))
1306 # Optimize away x2xN(a@N)
1307 for t
in ['int', 'uint', 'float']:
1308 for N
in type_sizes(t
):
1309 x2xN
= '{0}2{0}{1}'.format(t
[0], N
)
1310 aN
= 'a@{0}'.format(N
)
1311 optimizations
.append(((x2xN
, aN
), a
))
1313 # Optimize x2xN(y2yM(a@P)) -> y2yN(a) for integers
1314 # In particular, we can optimize away everything except upcast of downcast and
1315 # upcasts where the type differs from the other cast
1316 for N
, M
in itertools
.product(type_sizes('uint'), type_sizes('uint')):
1318 # The outer cast is a down-cast. It doesn't matter what the size of the
1319 # argument of the inner cast is because we'll never been in the upcast
1320 # of downcast case. Regardless of types, we'll always end up with y2yN
1322 for x
, y
in itertools
.product(['i', 'u'], ['i', 'u']):
1323 x2xN
= '{0}2{0}{1}'.format(x
, N
)
1324 y2yM
= '{0}2{0}{1}'.format(y
, M
)
1325 y2yN
= '{0}2{0}{1}'.format(y
, N
)
1326 optimizations
.append(((x2xN
, (y2yM
, a
)), (y2yN
, a
)))
1328 # If the outer cast is an up-cast, we have to be more careful about the
1329 # size of the argument of the inner cast and with types. In this case,
1330 # the type is always the type of type up-cast which is given by the
1332 for P
in type_sizes('uint'):
1333 # We can't optimize away up-cast of down-cast.
1337 # Because we're doing down-cast of down-cast, the types always have
1338 # to match between the two casts
1339 for x
in ['i', 'u']:
1340 x2xN
= '{0}2{0}{1}'.format(x
, N
)
1341 x2xM
= '{0}2{0}{1}'.format(x
, M
)
1342 aP
= 'a@{0}'.format(P
)
1343 optimizations
.append(((x2xN
, (x2xM
, aP
)), (x2xN
, a
)))
1345 # The N == M case is handled by other optimizations
1348 # Optimize comparisons with up-casts
1349 for t
in ['int', 'uint', 'float']:
1350 for N
, M
in itertools
.product(type_sizes(t
), repeat
=2):
1351 if N
== 1 or N
>= M
:
1354 x2xM
= '{0}2{0}{1}'.format(t
[0], M
)
1355 x2xN
= '{0}2{0}{1}'.format(t
[0], N
)
1358 xeq
= 'feq' if t
== 'float' else 'ieq'
1359 xne
= 'fne' if t
== 'float' else 'ine'
1360 xge
= '{0}ge'.format(t
[0])
1361 xlt
= '{0}lt'.format(t
[0])
1363 # Up-casts are lossless so for correctly signed comparisons of
1364 # up-casted values we can do the comparison at the largest of the two
1365 # original sizes and drop one or both of the casts. (We have
1366 # optimizations to drop the no-op casts which this may generate.)
1367 for P
in type_sizes(t
):
1373 ((xeq
, (x2xM
, aN
), (x2xM
, bP
)), (xeq
, a
, (x2xN
, b
))),
1374 ((xne
, (x2xM
, aN
), (x2xM
, bP
)), (xne
, a
, (x2xN
, b
))),
1375 ((xge
, (x2xM
, aN
), (x2xM
, bP
)), (xge
, a
, (x2xN
, b
))),
1376 ((xlt
, (x2xM
, aN
), (x2xM
, bP
)), (xlt
, a
, (x2xN
, b
))),
1377 ((xge
, (x2xM
, bP
), (x2xM
, aN
)), (xge
, (x2xN
, b
), a
)),
1378 ((xlt
, (x2xM
, bP
), (x2xM
, aN
)), (xlt
, (x2xN
, b
), a
)),
1381 # The next bit doesn't work on floats because the range checks would
1382 # get way too complicated.
1383 if t
in ['int', 'uint']:
1385 xN_min
= -(1 << (N
- 1))
1386 xN_max
= (1 << (N
- 1)) - 1
1389 xN_max
= (1 << N
) - 1
1393 # If we're up-casting and comparing to a constant, we can unfold
1394 # the comparison into a comparison with the shrunk down constant
1395 # and a check that the constant fits in the smaller bit size.
1397 ((xeq
, (x2xM
, aN
), '#b'),
1398 ('iand', (xeq
, a
, (x2xN
, b
)), (xeq
, (x2xM
, (x2xN
, b
)), b
))),
1399 ((xne
, (x2xM
, aN
), '#b'),
1400 ('ior', (xne
, a
, (x2xN
, b
)), (xne
, (x2xM
, (x2xN
, b
)), b
))),
1401 ((xlt
, (x2xM
, aN
), '#b'),
1402 ('iand', (xlt
, xN_min
, b
),
1403 ('ior', (xlt
, xN_max
, b
), (xlt
, a
, (x2xN
, b
))))),
1404 ((xlt
, '#a', (x2xM
, bN
)),
1405 ('iand', (xlt
, a
, xN_max
),
1406 ('ior', (xlt
, a
, xN_min
), (xlt
, (x2xN
, a
), b
)))),
1407 ((xge
, (x2xM
, aN
), '#b'),
1408 ('iand', (xge
, xN_max
, b
),
1409 ('ior', (xge
, xN_min
, b
), (xge
, a
, (x2xN
, b
))))),
1410 ((xge
, '#a', (x2xM
, bN
)),
1411 ('iand', (xge
, a
, xN_min
),
1412 ('ior', (xge
, a
, xN_max
), (xge
, (x2xN
, a
), b
)))),
1415 def fexp2i(exp
, bits
):
1416 # We assume that exp is already in the right range.
1418 return ('i2i16', ('ishl', ('iadd', exp
, 15), 10))
1420 return ('ishl', ('iadd', exp
, 127), 23)
1422 return ('pack_64_2x32_split', 0, ('ishl', ('iadd', exp
, 1023), 20))
1426 def ldexp(f
, exp
, bits
):
1427 # First, we clamp exp to a reasonable range. The maximum possible range
1428 # for a normal exponent is [-126, 127] and, throwing in denormals, you get
1429 # a maximum range of [-149, 127]. This means that we can potentially have
1430 # a swing of +-276. If you start with FLT_MAX, you actually have to do
1431 # ldexp(FLT_MAX, -278) to get it to flush all the way to zero. The GLSL
1432 # spec, on the other hand, only requires that we handle an exponent value
1433 # in the range [-126, 128]. This implementation is *mostly* correct; it
1434 # handles a range on exp of [-252, 254] which allows you to create any
1435 # value (including denorms if the hardware supports it) and to adjust the
1436 # exponent of any normal value to anything you want.
1438 exp
= ('imin', ('imax', exp
, -28), 30)
1440 exp
= ('imin', ('imax', exp
, -252), 254)
1442 exp
= ('imin', ('imax', exp
, -2044), 2046)
1446 # Now we compute two powers of 2, one for exp/2 and one for exp-exp/2.
1447 # (We use ishr which isn't the same for -1, but the -1 case still works
1448 # since we use exp-exp/2 as the second exponent.) While the spec
1449 # technically defines ldexp as f * 2.0^exp, simply multiplying once doesn't
1450 # work with denormals and doesn't allow for the full swing in exponents
1451 # that you can get with normalized values. Instead, we create two powers
1452 # of two and multiply by them each in turn. That way the effective range
1453 # of our exponent is doubled.
1454 pow2_1
= fexp2i(('ishr', exp
, 1), bits
)
1455 pow2_2
= fexp2i(('isub', exp
, ('ishr', exp
, 1)), bits
)
1456 return ('fmul', ('fmul', f
, pow2_1
), pow2_2
)
1459 (('ldexp@16', 'x', 'exp'), ldexp('x', 'exp', 16), 'options->lower_ldexp'),
1460 (('ldexp@32', 'x', 'exp'), ldexp('x', 'exp', 32), 'options->lower_ldexp'),
1461 (('ldexp@64', 'x', 'exp'), ldexp('x', 'exp', 64), 'options->lower_ldexp'),
1464 # Unreal Engine 4 demo applications open-codes bitfieldReverse()
1465 def bitfield_reverse(u
):
1466 step1
= ('ior', ('ishl', u
, 16), ('ushr', u
, 16))
1467 step2
= ('ior', ('ishl', ('iand', step1
, 0x00ff00ff), 8), ('ushr', ('iand', step1
, 0xff00ff00), 8))
1468 step3
= ('ior', ('ishl', ('iand', step2
, 0x0f0f0f0f), 4), ('ushr', ('iand', step2
, 0xf0f0f0f0), 4))
1469 step4
= ('ior', ('ishl', ('iand', step3
, 0x33333333), 2), ('ushr', ('iand', step3
, 0xcccccccc), 2))
1470 step5
= ('ior(many-comm-expr)', ('ishl', ('iand', step4
, 0x55555555), 1), ('ushr', ('iand', step4
, 0xaaaaaaaa), 1))
1474 optimizations
+= [(bitfield_reverse('x@32'), ('bitfield_reverse', 'x'), '!options->lower_bitfield_reverse')]
1476 # For any float comparison operation, "cmp", if you have "a == a && a cmp b"
1477 # then the "a == a" is redundant because it's equivalent to "a is not NaN"
1478 # and, if a is a NaN then the second comparison will fail anyway.
1479 for op
in ['flt', 'fge', 'feq']:
1481 (('iand', ('feq', a
, a
), (op
, a
, b
)), ('!' + op
, a
, b
)),
1482 (('iand', ('feq', a
, a
), (op
, b
, a
)), ('!' + op
, b
, a
)),
1485 # Add optimizations to handle the case where the result of a ternary is
1486 # compared to a constant. This way we can take things like
1492 # a ? (0 > 0) : (1 > 0)
1494 # which constant folding will eat for lunch. The resulting ternary will
1495 # further get cleaned up by the boolean reductions above and we will be
1496 # left with just the original variable "a".
1497 for op
in ['flt', 'fge', 'feq', 'fne',
1498 'ilt', 'ige', 'ieq', 'ine', 'ult', 'uge']:
1500 ((op
, ('bcsel', 'a', '#b', '#c'), '#d'),
1501 ('bcsel', 'a', (op
, 'b', 'd'), (op
, 'c', 'd'))),
1502 ((op
, '#d', ('bcsel', a
, '#b', '#c')),
1503 ('bcsel', 'a', (op
, 'd', 'b'), (op
, 'd', 'c'))),
1507 # For example, this converts things like
1509 # 1 + mix(0, a - 1, condition)
1513 # mix(1, (a-1)+1, condition)
1515 # Other optimizations will rearrange the constants.
1516 for op
in ['fadd', 'fmul', 'iadd', 'imul']:
1518 ((op
, ('bcsel(is_used_once)', a
, '#b', c
), '#d'), ('bcsel', a
, (op
, b
, d
), (op
, c
, d
)))
1521 # For derivatives in compute shaders, GLSL_NV_compute_shader_derivatives
1524 # If neither layout qualifier is specified, derivatives in compute shaders
1525 # return zero, which is consistent with the handling of built-in texture
1526 # functions like texture() in GLSL 4.50 compute shaders.
1527 for op
in ['fddx', 'fddx_fine', 'fddx_coarse',
1528 'fddy', 'fddy_fine', 'fddy_coarse']:
1530 ((op
, 'a'), 0.0, 'info->stage == MESA_SHADER_COMPUTE && info->cs.derivative_group == DERIVATIVE_GROUP_NONE')
1533 # Some optimizations for ir3-specific instructions.
1535 # 'al * bl': If either 'al' or 'bl' is zero, return zero.
1536 (('umul_low', '#a(is_lower_half_zero)', 'b'), (0)),
1537 # '(ah * bl) << 16 + c': If either 'ah' or 'bl' is zero, return 'c'.
1538 (('imadsh_mix16', '#a@32(is_lower_half_zero)', 'b@32', 'c@32'), ('c')),
1539 (('imadsh_mix16', 'a@32', '#b@32(is_upper_half_zero)', 'c@32'), ('c')),
1542 # These kinds of sequences can occur after nir_opt_peephole_select.
1544 # NOTE: fadd is not handled here because that gets in the way of ffma
1545 # generation in the i965 driver. Instead, fadd and ffma are handled in
1546 # late_optimizations.
1550 (('bcsel', a
, (op
+ '(is_used_once)', b
, c
, d
), (op
, b
, c
, e
)), (op
, b
, c
, ('bcsel', a
, d
, e
))),
1551 (('bcsel', a
, (op
, b
, c
, d
), (op
+ '(is_used_once)', b
, c
, e
)), (op
, b
, c
, ('bcsel', a
, d
, e
))),
1552 (('bcsel', a
, (op
+ '(is_used_once)', b
, c
, d
), (op
, b
, e
, d
)), (op
, b
, ('bcsel', a
, c
, e
), d
)),
1553 (('bcsel', a
, (op
, b
, c
, d
), (op
+ '(is_used_once)', b
, e
, d
)), (op
, b
, ('bcsel', a
, c
, e
), d
)),
1554 (('bcsel', a
, (op
+ '(is_used_once)', b
, c
, d
), (op
, e
, c
, d
)), (op
, ('bcsel', a
, b
, e
), c
, d
)),
1555 (('bcsel', a
, (op
, b
, c
, d
), (op
+ '(is_used_once)', e
, c
, d
)), (op
, ('bcsel', a
, b
, e
), c
, d
)),
1558 for op
in ['fmul', 'iadd', 'imul', 'iand', 'ior', 'ixor', 'fmin', 'fmax', 'imin', 'imax', 'umin', 'umax']:
1560 (('bcsel', a
, (op
+ '(is_used_once)', b
, c
), (op
, b
, 'd(is_not_const)')), (op
, b
, ('bcsel', a
, c
, d
))),
1561 (('bcsel', a
, (op
+ '(is_used_once)', b
, 'c(is_not_const)'), (op
, b
, d
)), (op
, b
, ('bcsel', a
, c
, d
))),
1562 (('bcsel', a
, (op
, b
, 'c(is_not_const)'), (op
+ '(is_used_once)', b
, d
)), (op
, b
, ('bcsel', a
, c
, d
))),
1563 (('bcsel', a
, (op
, b
, c
), (op
+ '(is_used_once)', b
, 'd(is_not_const)')), (op
, b
, ('bcsel', a
, c
, d
))),
1568 (('bcsel', a
, (op
+ '(is_used_once)', b
, c
), (op
, b
, d
)), (op
, b
, ('bcsel', a
, c
, d
))),
1569 (('bcsel', a
, (op
, b
, c
), (op
+ '(is_used_once)', b
, d
)), (op
, b
, ('bcsel', a
, c
, d
))),
1570 (('bcsel', a
, (op
+ '(is_used_once)', b
, c
), (op
, d
, c
)), (op
, ('bcsel', a
, b
, d
), c
)),
1571 (('bcsel', a
, (op
, b
, c
), (op
+ '(is_used_once)', d
, c
)), (op
, ('bcsel', a
, b
, d
), c
)),
1574 for op
in ['frcp', 'frsq', 'fsqrt', 'fexp2', 'flog2', 'fsign', 'fsin', 'fcos']:
1576 (('bcsel', a
, (op
+ '(is_used_once)', b
), (op
, c
)), (op
, ('bcsel', a
, b
, c
))),
1577 (('bcsel', a
, (op
, b
), (op
+ '(is_used_once)', c
)), (op
, ('bcsel', a
, b
, c
))),
1580 # This section contains "late" optimizations that should be run before
1581 # creating ffmas and calling regular optimizations for the final time.
1582 # Optimizations should go here if they help code generation and conflict
1583 # with the regular optimizations.
1584 before_ffma_optimizations
= [
1585 # Propagate constants down multiplication chains
1586 (('~fmul(is_used_once)', ('fmul(is_used_once)', 'a(is_not_const)', '#b'), 'c(is_not_const)'), ('fmul', ('fmul', a
, c
), b
)),
1587 (('imul(is_used_once)', ('imul(is_used_once)', 'a(is_not_const)', '#b'), 'c(is_not_const)'), ('imul', ('imul', a
, c
), b
)),
1588 (('~fadd(is_used_once)', ('fadd(is_used_once)', 'a(is_not_const)', '#b'), 'c(is_not_const)'), ('fadd', ('fadd', a
, c
), b
)),
1589 (('iadd(is_used_once)', ('iadd(is_used_once)', 'a(is_not_const)', '#b'), 'c(is_not_const)'), ('iadd', ('iadd', a
, c
), b
)),
1591 (('~fadd', ('fmul', a
, b
), ('fmul', a
, c
)), ('fmul', a
, ('fadd', b
, c
))),
1592 (('iadd', ('imul', a
, b
), ('imul', a
, c
)), ('imul', a
, ('iadd', b
, c
))),
1593 (('~fadd', ('fneg', a
), a
), 0.0),
1594 (('iadd', ('ineg', a
), a
), 0),
1595 (('iadd', ('ineg', a
), ('iadd', a
, b
)), b
),
1596 (('iadd', a
, ('iadd', ('ineg', a
), b
)), b
),
1597 (('~fadd', ('fneg', a
), ('fadd', a
, b
)), b
),
1598 (('~fadd', a
, ('fadd', ('fneg', a
), b
)), b
),
1600 (('~flrp@32', ('fadd(is_used_once)', a
, -1.0), ('fadd(is_used_once)', a
, 1.0), d
), ('fadd', ('flrp', -1.0, 1.0, d
), a
)),
1601 (('~flrp@32', ('fadd(is_used_once)', a
, 1.0), ('fadd(is_used_once)', a
, -1.0), d
), ('fadd', ('flrp', 1.0, -1.0, d
), a
)),
1602 (('~flrp@32', ('fadd(is_used_once)', a
, '#b'), ('fadd(is_used_once)', a
, '#c'), d
), ('fadd', ('fmul', d
, ('fadd', c
, ('fneg', b
))), ('fadd', a
, b
))),
1605 # This section contains "late" optimizations that should be run after the
1606 # regular optimizations have finished. Optimizations should go here if
1607 # they help code generation but do not necessarily produce code that is
1608 # more easily optimizable.
1609 late_optimizations
= [
1610 # Most of these optimizations aren't quite safe when you get infinity or
1611 # Nan involved but the first one should be fine.
1612 (('flt', ('fadd', a
, b
), 0.0), ('flt', a
, ('fneg', b
))),
1613 (('flt', ('fneg', ('fadd', a
, b
)), 0.0), ('flt', ('fneg', a
), b
)),
1614 (('~fge', ('fadd', a
, b
), 0.0), ('fge', a
, ('fneg', b
))),
1615 (('~fge', ('fneg', ('fadd', a
, b
)), 0.0), ('fge', ('fneg', a
), b
)),
1616 (('~feq', ('fadd', a
, b
), 0.0), ('feq', a
, ('fneg', b
))),
1617 (('~fne', ('fadd', a
, b
), 0.0), ('fne', a
, ('fneg', b
))),
1619 # nir_lower_to_source_mods will collapse this, but its existence during the
1620 # optimization loop can prevent other optimizations.
1621 (('fneg', ('fneg', a
)), a
),
1623 # Subtractions get lowered during optimization, so we need to recombine them
1624 (('fadd', 'a', ('fneg', 'b')), ('fsub', 'a', 'b'), '!options->lower_sub'),
1625 (('iadd', 'a', ('ineg', 'b')), ('isub', 'a', 'b'), '!options->lower_sub'),
1626 (('fneg', a
), ('fsub', 0.0, a
), 'options->lower_negate'),
1627 (('ineg', a
), ('isub', 0, a
), 'options->lower_negate'),
1629 # These are duplicated from the main optimizations table. The late
1630 # patterns that rearrange expressions like x - .5 < 0 to x < .5 can create
1631 # new patterns like these. The patterns that compare with zero are removed
1632 # because they are unlikely to be created in by anything in
1633 # late_optimizations.
1634 (('flt', ('fsat(is_used_once)', a
), '#b(is_gt_0_and_lt_1)'), ('flt', a
, b
)),
1635 (('flt', '#b(is_gt_0_and_lt_1)', ('fsat(is_used_once)', a
)), ('flt', b
, a
)),
1636 (('fge', ('fsat(is_used_once)', a
), '#b(is_gt_0_and_lt_1)'), ('fge', a
, b
)),
1637 (('fge', '#b(is_gt_0_and_lt_1)', ('fsat(is_used_once)', a
)), ('fge', b
, a
)),
1638 (('feq', ('fsat(is_used_once)', a
), '#b(is_gt_0_and_lt_1)'), ('feq', a
, b
)),
1639 (('fne', ('fsat(is_used_once)', a
), '#b(is_gt_0_and_lt_1)'), ('fne', a
, b
)),
1641 (('fge', ('fsat(is_used_once)', a
), 1.0), ('fge', a
, 1.0)),
1642 (('flt', ('fsat(is_used_once)', a
), 1.0), ('flt', a
, 1.0)),
1644 (('~fge', ('fmin(is_used_once)', ('fadd(is_used_once)', a
, b
), ('fadd', c
, d
)), 0.0), ('iand', ('fge', a
, ('fneg', b
)), ('fge', c
, ('fneg', d
)))),
1646 (('flt', ('fneg', a
), ('fneg', b
)), ('flt', b
, a
)),
1647 (('fge', ('fneg', a
), ('fneg', b
)), ('fge', b
, a
)),
1648 (('feq', ('fneg', a
), ('fneg', b
)), ('feq', b
, a
)),
1649 (('fne', ('fneg', a
), ('fneg', b
)), ('fne', b
, a
)),
1650 (('flt', ('fneg', a
), -1.0), ('flt', 1.0, a
)),
1651 (('flt', -1.0, ('fneg', a
)), ('flt', a
, 1.0)),
1652 (('fge', ('fneg', a
), -1.0), ('fge', 1.0, a
)),
1653 (('fge', -1.0, ('fneg', a
)), ('fge', a
, 1.0)),
1654 (('fne', ('fneg', a
), -1.0), ('fne', 1.0, a
)),
1655 (('feq', -1.0, ('fneg', a
)), ('feq', a
, 1.0)),
1658 (('iand', a
, a
), a
),
1660 (('~fadd', ('fneg(is_used_once)', ('fsat(is_used_once)', 'a(is_not_fmul)')), 1.0), ('fsat', ('fadd', 1.0, ('fneg', a
)))),
1662 (('fdot2', a
, b
), ('fdot_replicated2', a
, b
), 'options->fdot_replicates'),
1663 (('fdot3', a
, b
), ('fdot_replicated3', a
, b
), 'options->fdot_replicates'),
1664 (('fdot4', a
, b
), ('fdot_replicated4', a
, b
), 'options->fdot_replicates'),
1665 (('fdph', a
, b
), ('fdph_replicated', a
, b
), 'options->fdot_replicates'),
1667 (('~flrp@32', ('fadd(is_used_once)', a
, b
), ('fadd(is_used_once)', a
, c
), d
), ('fadd', ('flrp', b
, c
, d
), a
)),
1668 (('~flrp@64', ('fadd(is_used_once)', a
, b
), ('fadd(is_used_once)', a
, c
), d
), ('fadd', ('flrp', b
, c
, d
), a
)),
1670 (('~fadd@32', 1.0, ('fmul(is_used_once)', c
, ('fadd', b
, -1.0 ))), ('fadd', ('fadd', 1.0, ('fneg', c
)), ('fmul', b
, c
)), 'options->lower_flrp32'),
1671 (('~fadd@64', 1.0, ('fmul(is_used_once)', c
, ('fadd', b
, -1.0 ))), ('fadd', ('fadd', 1.0, ('fneg', c
)), ('fmul', b
, c
)), 'options->lower_flrp64'),
1673 # A similar operation could apply to any ffma(#a, b, #(-a/2)), but this
1674 # particular operation is common for expanding values stored in a texture
1675 # from [0,1] to [-1,1].
1676 (('~ffma@32', a
, 2.0, -1.0), ('flrp', -1.0, 1.0, a
), '!options->lower_flrp32'),
1677 (('~ffma@32', a
, -2.0, -1.0), ('flrp', -1.0, 1.0, ('fneg', a
)), '!options->lower_flrp32'),
1678 (('~ffma@32', a
, -2.0, 1.0), ('flrp', 1.0, -1.0, a
), '!options->lower_flrp32'),
1679 (('~ffma@32', a
, 2.0, 1.0), ('flrp', 1.0, -1.0, ('fneg', a
)), '!options->lower_flrp32'),
1680 (('~fadd@32', ('fmul(is_used_once)', 2.0, a
), -1.0), ('flrp', -1.0, 1.0, a
), '!options->lower_flrp32'),
1681 (('~fadd@32', ('fmul(is_used_once)', -2.0, a
), -1.0), ('flrp', -1.0, 1.0, ('fneg', a
)), '!options->lower_flrp32'),
1682 (('~fadd@32', ('fmul(is_used_once)', -2.0, a
), 1.0), ('flrp', 1.0, -1.0, a
), '!options->lower_flrp32'),
1683 (('~fadd@32', ('fmul(is_used_once)', 2.0, a
), 1.0), ('flrp', 1.0, -1.0, ('fneg', a
)), '!options->lower_flrp32'),
1687 # a + -a*a + a*b (1)
1689 # Option 1: ffma(a, (b-a), a)
1691 # Alternately, after (1):
1697 # Option 2: ffma(a, 2, -(a*a))
1698 # Option 3: ffma(a, 2, (-a)*a)
1699 # Option 4: ffma(a, -a, (2*a)
1700 # Option 5: a * (2 - a)
1702 # There are a lot of other possible combinations.
1703 (('~ffma@32', ('fadd', b
, ('fneg', a
)), a
, a
), ('flrp', a
, b
, a
), '!options->lower_flrp32'),
1704 (('~ffma@32', a
, 2.0, ('fneg', ('fmul', a
, a
))), ('flrp', a
, 1.0, a
), '!options->lower_flrp32'),
1705 (('~ffma@32', a
, 2.0, ('fmul', ('fneg', a
), a
)), ('flrp', a
, 1.0, a
), '!options->lower_flrp32'),
1706 (('~ffma@32', a
, ('fneg', a
), ('fmul', 2.0, a
)), ('flrp', a
, 1.0, a
), '!options->lower_flrp32'),
1707 (('~fmul@32', a
, ('fadd', 2.0, ('fneg', a
))), ('flrp', a
, 1.0, a
), '!options->lower_flrp32'),
1709 # we do these late so that we don't get in the way of creating ffmas
1710 (('fmin', ('fadd(is_used_once)', '#c', a
), ('fadd(is_used_once)', '#c', b
)), ('fadd', c
, ('fmin', a
, b
))),
1711 (('fmax', ('fadd(is_used_once)', '#c', a
), ('fadd(is_used_once)', '#c', b
)), ('fadd', c
, ('fmax', a
, b
))),
1713 (('bcsel', a
, 0, ('b2f32', ('inot', 'b@bool'))), ('b2f32', ('inot', ('ior', a
, b
)))),
1715 # Putting this in 'optimizations' interferes with the bcsel(a, op(b, c),
1716 # op(b, d)) => op(b, bcsel(a, c, d)) transformations. I do not know why.
1717 (('bcsel', ('feq', ('fsqrt', 'a(is_not_negative)'), 0.0), intBitsToFloat(0x7f7fffff), ('frsq', a
)),
1718 ('fmin', ('frsq', a
), intBitsToFloat(0x7f7fffff))),
1720 # Things that look like DPH in the source shader may get expanded to
1721 # something that looks like dot(v1.xyz, v2.xyz) + v1.w by the time it gets
1722 # to NIR. After FFMA is generated, this can look like:
1724 # fadd(ffma(v1.z, v2.z, ffma(v1.y, v2.y, fmul(v1.x, v2.x))), v1.w)
1726 # Reassociate the last addition into the first multiplication.
1728 # Some shaders do not use 'invariant' in vertex and (possibly) geometry
1729 # shader stages on some outputs that are intended to be invariant. For
1730 # various reasons, this optimization may not be fully applied in all
1731 # shaders used for different rendering passes of the same geometry. This
1732 # can result in Z-fighting artifacts (at best). For now, disable this
1733 # optimization in these stages. See bugzilla #111490. In tessellation
1734 # stages applications seem to use 'precise' when necessary, so allow the
1735 # optimization in those stages.
1736 (('~fadd', ('ffma(is_used_once)', a
, b
, ('ffma', c
, d
, ('fmul', 'e(is_not_const_and_not_fsign)', 'f(is_not_const_and_not_fsign)'))), 'g(is_not_const)'),
1737 ('ffma', a
, b
, ('ffma', c
, d
, ('ffma', e
, 'f', 'g'))), '(info->stage != MESA_SHADER_VERTEX && info->stage != MESA_SHADER_GEOMETRY) && !options->intel_vec4'),
1738 (('~fadd', ('ffma(is_used_once)', a
, b
, ('fmul', 'c(is_not_const_and_not_fsign)', 'd(is_not_const_and_not_fsign)') ), 'e(is_not_const)'),
1739 ('ffma', a
, b
, ('ffma', c
, d
, e
)), '(info->stage != MESA_SHADER_VERTEX && info->stage != MESA_SHADER_GEOMETRY) && !options->intel_vec4'),
1743 late_optimizations
+= [
1744 (('bcsel', a
, (op
+ '(is_used_once)', b
, c
), (op
, b
, d
)), (op
, b
, ('bcsel', a
, c
, d
))),
1745 (('bcsel', a
, (op
, b
, c
), (op
+ '(is_used_once)', b
, d
)), (op
, b
, ('bcsel', a
, c
, d
))),
1749 late_optimizations
+= [
1750 (('bcsel', a
, (op
+ '(is_used_once)', b
, c
, d
), (op
, b
, c
, e
)), (op
, b
, c
, ('bcsel', a
, d
, e
))),
1751 (('bcsel', a
, (op
, b
, c
, d
), (op
+ '(is_used_once)', b
, c
, e
)), (op
, b
, c
, ('bcsel', a
, d
, e
))),
1753 (('bcsel', a
, (op
+ '(is_used_once)', b
, c
, d
), (op
, b
, e
, d
)), (op
, b
, ('bcsel', a
, c
, e
), d
)),
1754 (('bcsel', a
, (op
, b
, c
, d
), (op
+ '(is_used_once)', b
, e
, d
)), (op
, b
, ('bcsel', a
, c
, e
), d
)),
1757 print(nir_algebraic
.AlgebraicPass("nir_opt_algebraic", optimizations
).render())
1758 print(nir_algebraic
.AlgebraicPass("nir_opt_algebraic_before_ffma",
1759 before_ffma_optimizations
).render())
1760 print(nir_algebraic
.AlgebraicPass("nir_opt_algebraic_late",
1761 late_optimizations
).render())