freedreno/ir3: Add support for disasm of cat2 float32 immediates.

[mesa.git] / src / freedreno / ir3 / ir3.h

/*
 * Copyright (c) 2013 Rob Clark <robdclark@gmail.com>
 *
 * Permission is hereby granted, free of charge, to any person obtaining a
 * copy of this software and associated documentation files (the "Software"),
 * to deal in the Software without restriction, including without limitation
 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
 * and/or sell copies of the Software, and to permit persons to whom the
 * Software is furnished to do so, subject to the following conditions:
 *
 * The above copyright notice and this permission notice (including the next
 * paragraph) shall be included in all copies or substantial portions of the
 * Software.
 *
 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.  IN NO EVENT SHALL
 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
 * SOFTWARE.
 */

#ifndef IR3_H_
#define IR3_H_

#include <stdint.h>
#include <stdbool.h>

#include "compiler/shader_enums.h"

#include "util/bitscan.h"
#include "util/list.h"
#include "util/set.h"
#include "util/u_debug.h"

#include "instr-a3xx.h"

/* low level intermediate representation of an adreno shader program */

struct ir3_compiler;
struct ir3;
struct ir3_instruction;
struct ir3_block;

struct ir3_info {
        uint32_t gpu_id;
        uint16_t sizedwords;
        uint16_t instrs_count;   /* expanded to account for rpt's */
        uint16_t nops_count;     /* # of nop instructions, including nopN */
        uint16_t mov_count;
        uint16_t cov_count;
        /* NOTE: max_reg, etc, does not include registers not touched
         * by the shader (ie. vertex fetched via VFD_DECODE but not
         * touched by shader)
         */
        int8_t   max_reg;   /* highest GPR # used by shader */
        int8_t   max_half_reg;
        int16_t  max_const;

        /* number of sync bits: */
        uint16_t ss, sy;

        /* estimate of number of cycles stalled on (ss) */
        uint16_t sstall;

        uint16_t last_baryf;     /* instruction # of last varying fetch */
};

struct ir3_register {
        enum {
                IR3_REG_CONST  = 0x001,
                IR3_REG_IMMED  = 0x002,
                IR3_REG_HALF   = 0x004,
                /* high registers are used for some things in compute shaders,
                 * for example.  Seems to be for things that are global to all
                 * threads in a wave, so possibly these are global/shared by
                 * all the threads in the wave?
                 */
                IR3_REG_HIGH   = 0x008,
                IR3_REG_RELATIV= 0x010,
                IR3_REG_R      = 0x020,
                /* Most instructions, it seems, can do float abs/neg but not
                 * integer.  The CP pass needs to know what is intended (int or
                 * float) in order to do the right thing.  For this reason the
                 * abs/neg flags are split out into float and int variants.  In
                 * addition, .b (bitwise) operations, the negate is actually a
                 * bitwise not, so split that out into a new flag to make it
                 * more clear.
                 */
                IR3_REG_FNEG   = 0x040,
                IR3_REG_FABS   = 0x080,
                IR3_REG_SNEG   = 0x100,
                IR3_REG_SABS   = 0x200,
                IR3_REG_BNOT   = 0x400,
                IR3_REG_EVEN   = 0x800,
                IR3_REG_POS_INF= 0x1000,
                /* (ei) flag, end-input?  Set on last bary, presumably to signal
                 * that the shader needs no more input:
                 */
                IR3_REG_EI     = 0x2000,
                /* meta-flags, for intermediate stages of IR, ie.
                 * before register assignment is done:
                 */
                IR3_REG_SSA    = 0x4000,   /* 'instr' is ptr to assigning instr */
                IR3_REG_ARRAY  = 0x8000,

        } flags;

        /* used for cat5 instructions, but also for internal/IR level
         * tracking of what registers are read/written by an instruction.
         * wrmask may be a bad name since it is used to represent both
         * src and dst that touch multiple adjacent registers.
         */
        unsigned wrmask : 16;  /* up to vec16 */

        /* for relative addressing, 32bits for array size is too small,
         * but otoh we don't need to deal with disjoint sets, so instead
         * use a simple size field (number of scalar components).
         *
         * Note the size field isn't important for relative const (since
         * we don't have to do register allocation for constants).
         */
        unsigned size : 15;

        bool merged : 1;    /* half-regs conflict with full regs (ie >= a6xx) */

        /* normal registers:
         * the component is in the low two bits of the reg #, so
         * rN.x becomes: (N << 2) | x
         */
        uint16_t num;
        union {
                /* immediate: */
                int32_t  iim_val;
                uint32_t uim_val;
                float    fim_val;
                /* relative: */
                struct {
                        uint16_t id;
                        int16_t offset;
                } array;
        };

        /* For IR3_REG_SSA, src registers contain ptr back to assigning
         * instruction.
         *
         * For IR3_REG_ARRAY, the pointer is back to the last dependent
         * array access (although the net effect is the same, it points
         * back to a previous instruction that we depend on).
         */
        struct ir3_instruction *instr;
};

/*
 * Stupid/simple growable array implementation:
 */
#define DECLARE_ARRAY(type, name) \
        unsigned name ## _count, name ## _sz; \
        type * name;

#define array_insert(ctx, arr, val) do { \
                if (arr ## _count == arr ## _sz) { \
                        arr ## _sz = MAX2(2 * arr ## _sz, 16); \
                        arr = reralloc_size(ctx, arr, arr ## _sz * sizeof(arr[0])); \
                } \
                arr[arr ##_count++] = val; \
        } while (0)

struct ir3_instruction {
        struct ir3_block *block;
        opc_t opc;
        enum {
                /* (sy) flag is set on first instruction, and after sample
                 * instructions (probably just on RAW hazard).
                 */
                IR3_INSTR_SY    = 0x001,
                /* (ss) flag is set on first instruction, and first instruction
                 * to depend on the result of "long" instructions (RAW hazard):
                 *
                 *   rcp, rsq, log2, exp2, sin, cos, sqrt
                 *
                 * It seems to synchronize until all in-flight instructions are
                 * completed, for example:
                 *
                 *   rsq hr1.w, hr1.w
                 *   add.f hr2.z, (neg)hr2.z, hc0.y
                 *   mul.f hr2.w, (neg)hr2.y, (neg)hr2.y
                 *   rsq hr2.x, hr2.x
                 *   (rpt1)nop
                 *   mad.f16 hr2.w, hr2.z, hr2.z, hr2.w
                 *   nop
                 *   mad.f16 hr2.w, (neg)hr0.w, (neg)hr0.w, hr2.w
                 *   (ss)(rpt2)mul.f hr1.x, (r)hr1.x, hr1.w
                 *   (rpt2)mul.f hr0.x, (neg)(r)hr0.x, hr2.x
                 *
                 * The last mul.f does not have (ss) set, presumably because the
                 * (ss) on the previous instruction does the job.
                 *
                 * The blob driver also seems to set it on WAR hazards, although
                 * not really clear if this is needed or just blob compiler being
                 * sloppy.  So far I haven't found a case where removing the (ss)
                 * causes problems for WAR hazard, but I could just be getting
                 * lucky:
                 *
                 *   rcp r1.y, r3.y
                 *   (ss)(rpt2)mad.f32 r3.y, (r)c9.x, r1.x, (r)r3.z
                 *
                 */
                IR3_INSTR_SS    = 0x002,
                /* (jp) flag is set on jump targets:
                 */
                IR3_INSTR_JP    = 0x004,
                IR3_INSTR_UL    = 0x008,
                IR3_INSTR_3D    = 0x010,
                IR3_INSTR_A     = 0x020,
                IR3_INSTR_O     = 0x040,
                IR3_INSTR_P     = 0x080,
                IR3_INSTR_S     = 0x100,
                IR3_INSTR_S2EN  = 0x200,
                IR3_INSTR_G     = 0x400,
                IR3_INSTR_SAT   = 0x800,
                /* (cat5/cat6) Bindless */
                IR3_INSTR_B     = 0x1000,
                /* (cat5-only) Get some parts of the encoding from a1.x */
                IR3_INSTR_A1EN  = 0x2000,
                /* meta-flags, for intermediate stages of IR, ie.
                 * before register assignment is done:
                 */
                IR3_INSTR_MARK  = 0x4000,
                IR3_INSTR_UNUSED= 0x8000,
        } flags;
        uint8_t repeat;
        uint8_t nop;
#ifdef DEBUG
        unsigned regs_max;
#endif
        unsigned regs_count;
        struct ir3_register **regs;
        union {
                struct {
                        char inv;
                        char comp;
                        int  immed;
                        struct ir3_block *target;
                } cat0;
                struct {
                        type_t src_type, dst_type;
                } cat1;
                struct {
                        enum {
                                IR3_COND_LT = 0,
                                IR3_COND_LE = 1,
                                IR3_COND_GT = 2,
                                IR3_COND_GE = 3,
                                IR3_COND_EQ = 4,
                                IR3_COND_NE = 5,
                        } condition;
                } cat2;
                struct {
                        unsigned samp, tex;
                        unsigned tex_base : 3;
                        type_t type;
                } cat5;
                struct {
                        type_t type;
                        int src_offset;
                        int dst_offset;
                        int iim_val : 3;      /* for ldgb/stgb, # of components */
                        unsigned d : 3;       /* for ldc, component offset */
                        bool typed : 1;
                        unsigned base : 3;
                } cat6;
                struct {
                        unsigned w : 1;       /* write */
                        unsigned r : 1;       /* read */
                        unsigned l : 1;       /* local */
                        unsigned g : 1;       /* global */
                } cat7;
                /* for meta-instructions, just used to hold extra data
                 * before instruction scheduling, etc
                 */
                struct {
                        int off;              /* component/offset */
                } split;
                struct {
                        /* for output collects, this maps back to the entry in the
                         * ir3_shader_variant::outputs table.
                         */
                        int outidx;
                } collect;
                struct {
                        unsigned samp, tex;
                        unsigned input_offset;
                        unsigned samp_base : 3;
                        unsigned tex_base : 3;
                } prefetch;
                struct {
                        /* maps back to entry in ir3_shader_variant::inputs table: */
                        int inidx;
                        /* for sysvals, identifies the sysval type.  Mostly so we can
                         * identify the special cases where a sysval should not be DCE'd
                         * (currently, just pre-fs texture fetch)
                         */
                        gl_system_value sysval;
                } input;
        };

        /* When we get to the RA stage, we need instruction's position/name: */
        uint16_t ip;
        uint16_t name;

        /* used for per-pass extra instruction data.
         *
         * TODO we should remove the per-pass data like this and 'use_count'
         * and do something similar to what RA does w/ ir3_ra_instr_data..
         * ie. use the ir3_count_instructions pass, and then use instr->ip
         * to index into a table of pass-private data.
         */
        void *data;

        /**
         * Valid if pass calls ir3_find_ssa_uses().. see foreach_ssa_use()
         */
        struct set *uses;

        int sun;            /* Sethi–Ullman number, used by sched */
        int use_count;      /* currently just updated/used by cp */

        /* Used during CP and RA stages.  For collect and shader inputs/
         * outputs where we need a sequence of consecutive registers,
         * keep track of each src instructions left (ie 'n-1') and right
         * (ie 'n+1') neighbor.  The front-end must insert enough mov's
         * to ensure that each instruction has at most one left and at
         * most one right neighbor.  During the copy-propagation pass,
         * we only remove mov's when we can preserve this constraint.
         * And during the RA stage, we use the neighbor information to
         * allocate a block of registers in one shot.
         *
         * TODO: maybe just add something like:
         *   struct ir3_instruction_ref {
         *       struct ir3_instruction *instr;
         *       unsigned cnt;
         *   }
         *
         * Or can we get away without the refcnt stuff?  It seems like
         * it should be overkill..  the problem is if, potentially after
         * already eliminating some mov's, if you have a single mov that
         * needs to be grouped with it's neighbors in two different
         * places (ex. shader output and a collect).
         */
        struct {
                struct ir3_instruction *left, *right;
                uint16_t left_cnt, right_cnt;
        } cp;

        /* an instruction can reference at most one address register amongst
         * it's src/dst registers.  Beyond that, you need to insert mov's.
         *
         * NOTE: do not write this directly, use ir3_instr_set_address()
         */
        struct ir3_instruction *address;

        /* Tracking for additional dependent instructions.  Used to handle
         * barriers, WAR hazards for arrays/SSBOs/etc.
         */
        DECLARE_ARRAY(struct ir3_instruction *, deps);

        /*
         * From PoV of instruction scheduling, not execution (ie. ignores global/
         * local distinction):
         *                            shared  image  atomic  SSBO  everything
         *   barrier()/            -   R/W     R/W    R/W     R/W       X
         *     groupMemoryBarrier()
         *   memoryBarrier()       -           R/W    R/W
         *     (but only images declared coherent?)
         *   memoryBarrierAtomic() -                  R/W
         *   memoryBarrierBuffer() -                          R/W
         *   memoryBarrierImage()  -           R/W
         *   memoryBarrierShared() -   R/W
         *
         * TODO I think for SSBO/image/shared, in cases where we can determine
         * which variable is accessed, we don't need to care about accesses to
         * different variables (unless declared coherent??)
         */
        enum {
                IR3_BARRIER_EVERYTHING = 1 << 0,
                IR3_BARRIER_SHARED_R   = 1 << 1,
                IR3_BARRIER_SHARED_W   = 1 << 2,
                IR3_BARRIER_IMAGE_R    = 1 << 3,
                IR3_BARRIER_IMAGE_W    = 1 << 4,
                IR3_BARRIER_BUFFER_R   = 1 << 5,
                IR3_BARRIER_BUFFER_W   = 1 << 6,
                IR3_BARRIER_ARRAY_R    = 1 << 7,
                IR3_BARRIER_ARRAY_W    = 1 << 8,
        } barrier_class, barrier_conflict;

        /* Entry in ir3_block's instruction list: */
        struct list_head node;

#ifdef DEBUG
        uint32_t serialno;
#endif

        // TODO only computerator/assembler:
        int line;
};

static inline struct ir3_instruction *
ir3_neighbor_first(struct ir3_instruction *instr)
{
        int cnt = 0;
        while (instr->cp.left) {
                instr = instr->cp.left;
                if (++cnt > 0xffff) {
                        debug_assert(0);
                        break;
                }
        }
        return instr;
}

static inline int ir3_neighbor_count(struct ir3_instruction *instr)
{
        int num = 1;

        debug_assert(!instr->cp.left);

        while (instr->cp.right) {
                num++;
                instr = instr->cp.right;
                if (num > 0xffff) {
                        debug_assert(0);
                        break;
                }
        }

        return num;
}

struct ir3 {
        struct ir3_compiler *compiler;
        gl_shader_stage type;

        DECLARE_ARRAY(struct ir3_instruction *, inputs);
        DECLARE_ARRAY(struct ir3_instruction *, outputs);

        /* Track bary.f (and ldlv) instructions.. this is needed in
         * scheduling to ensure that all varying fetches happen before
         * any potential kill instructions.  The hw gets grumpy if all
         * threads in a group are killed before the last bary.f gets
         * a chance to signal end of input (ei).
         */
        DECLARE_ARRAY(struct ir3_instruction *, baryfs);

        /* Track all indirect instructions (read and write).  To avoid
         * deadlock scenario where an address register gets scheduled,
         * but other dependent src instructions cannot be scheduled due
         * to dependency on a *different* address register value, the
         * scheduler needs to ensure that all dependencies other than
         * the instruction other than the address register are scheduled
         * before the one that writes the address register.  Having a
         * convenient list of instructions that reference some address
         * register simplifies this.
         */
        DECLARE_ARRAY(struct ir3_instruction *, a0_users);

        /* same for a1.x: */
        DECLARE_ARRAY(struct ir3_instruction *, a1_users);

        /* and same for instructions that consume predicate register: */
        DECLARE_ARRAY(struct ir3_instruction *, predicates);

        /* Track texture sample instructions which need texture state
         * patched in (for astc-srgb workaround):
         */
        DECLARE_ARRAY(struct ir3_instruction *, astc_srgb);

        /* List of blocks: */
        struct list_head block_list;

        /* List of ir3_array's: */
        struct list_head array_list;

        unsigned max_sun;   /* max Sethi–Ullman number */

#ifdef DEBUG
        unsigned block_count, instr_count;
#endif
};

struct ir3_array {
        struct list_head node;
        unsigned length;
        unsigned id;

        struct nir_register *r;

        /* To avoid array write's from getting DCE'd, keep track of the
         * most recent write.  Any array access depends on the most
         * recent write.  This way, nothing depends on writes after the
         * last read.  But all the writes that happen before that have
         * something depending on them
         */
        struct ir3_instruction *last_write;

        /* extra stuff used in RA pass: */
        unsigned base;      /* base vreg name */
        unsigned reg;       /* base physical reg */
        uint16_t start_ip, end_ip;

        /* Indicates if half-precision */
        bool half;
};

struct ir3_array * ir3_lookup_array(struct ir3 *ir, unsigned id);

struct ir3_block {
        struct list_head node;
        struct ir3 *shader;

        const struct nir_block *nblock;

        struct list_head instr_list;  /* list of ir3_instruction */

        /* each block has either one or two successors.. in case of
         * two successors, 'condition' decides which one to follow.
         * A block preceding an if/else has two successors.
         */
        struct ir3_instruction *condition;
        struct ir3_block *successors[2];

        struct set *predecessors;     /* set of ir3_block */

        uint16_t start_ip, end_ip;

        /* Track instructions which do not write a register but other-
         * wise must not be discarded (such as kill, stg, etc)
         */
        DECLARE_ARRAY(struct ir3_instruction *, keeps);

        /* used for per-pass extra block data.  Mainly used right
         * now in RA step to track livein/liveout.
         */
        void *data;

#ifdef DEBUG
        uint32_t serialno;
#endif
};

static inline uint32_t
block_id(struct ir3_block *block)
{
#ifdef DEBUG
        return block->serialno;
#else
        return (uint32_t)(unsigned long)block;
#endif
}

struct ir3 * ir3_create(struct ir3_compiler *compiler, gl_shader_stage type);
void ir3_destroy(struct ir3 *shader);
void * ir3_assemble(struct ir3 *shader,
                struct ir3_info *info, uint32_t gpu_id);
void * ir3_alloc(struct ir3 *shader, int sz);

struct ir3_block * ir3_block_create(struct ir3 *shader);

struct ir3_instruction * ir3_instr_create(struct ir3_block *block, opc_t opc);
struct ir3_instruction * ir3_instr_create2(struct ir3_block *block,
                opc_t opc, int nreg);
struct ir3_instruction * ir3_instr_clone(struct ir3_instruction *instr);
void ir3_instr_add_dep(struct ir3_instruction *instr, struct ir3_instruction *dep);
const char *ir3_instr_name(struct ir3_instruction *instr);

struct ir3_register * ir3_reg_create(struct ir3_instruction *instr,
                int num, int flags);
struct ir3_register * ir3_reg_clone(struct ir3 *shader,
                struct ir3_register *reg);

void ir3_instr_set_address(struct ir3_instruction *instr,
                struct ir3_instruction *addr);

static inline bool ir3_instr_check_mark(struct ir3_instruction *instr)
{
        if (instr->flags & IR3_INSTR_MARK)
                return true;  /* already visited */
        instr->flags |= IR3_INSTR_MARK;
        return false;
}

void ir3_block_clear_mark(struct ir3_block *block);
void ir3_clear_mark(struct ir3 *shader);

unsigned ir3_count_instructions(struct ir3 *ir);
unsigned ir3_count_instructions_ra(struct ir3 *ir);

void ir3_find_ssa_uses(struct ir3 *ir, void *mem_ctx, bool falsedeps);

#include "util/set.h"
#define foreach_ssa_use(__use, __instr) \
        for (struct ir3_instruction *__use = (void *)~0; \
             __use && (__instr)->uses; __use = NULL) \
                set_foreach ((__instr)->uses, __entry) \
                        if ((__use = (void *)__entry->key))

#define MAX_ARRAYS 16

/* comp:
 *   0 - x
 *   1 - y
 *   2 - z
 *   3 - w
 */
static inline uint32_t regid(int num, int comp)
{
        return (num << 2) | (comp & 0x3);
}

static inline uint32_t reg_num(struct ir3_register *reg)
{
        return reg->num >> 2;
}

static inline uint32_t reg_comp(struct ir3_register *reg)
{
        return reg->num & 0x3;
}

#define INVALID_REG      regid(63, 0)
#define VALIDREG(r)      ((r) != INVALID_REG)
#define CONDREG(r, val)  COND(VALIDREG(r), (val))

static inline bool is_flow(struct ir3_instruction *instr)
{
        return (opc_cat(instr->opc) == 0);
}

static inline bool is_kill(struct ir3_instruction *instr)
{
        return instr->opc == OPC_KILL;
}

static inline bool is_nop(struct ir3_instruction *instr)
{
        return instr->opc == OPC_NOP;
}

static inline bool is_same_type_reg(struct ir3_register *reg1,
                struct ir3_register *reg2)
{
        unsigned type_reg1 = (reg1->flags & (IR3_REG_HIGH | IR3_REG_HALF));
        unsigned type_reg2 = (reg2->flags & (IR3_REG_HIGH | IR3_REG_HALF));

        if (type_reg1 ^ type_reg2)
                return false;
        else
                return true;
}

/* Is it a non-transformative (ie. not type changing) mov?  This can
 * also include absneg.s/absneg.f, which for the most part can be
 * treated as a mov (single src argument).
 */
static inline bool is_same_type_mov(struct ir3_instruction *instr)
{
        struct ir3_register *dst;

        switch (instr->opc) {
        case OPC_MOV:
                if (instr->cat1.src_type != instr->cat1.dst_type)
                        return false;
                /* If the type of dest reg and src reg are different,
                 * it shouldn't be considered as same type mov
                 */
                if (!is_same_type_reg(instr->regs[0], instr->regs[1]))
                        return false;
                break;
        case OPC_ABSNEG_F:
        case OPC_ABSNEG_S:
                if (instr->flags & IR3_INSTR_SAT)
                        return false;
                /* If the type of dest reg and src reg are different,
                 * it shouldn't be considered as same type mov
                 */
                if (!is_same_type_reg(instr->regs[0], instr->regs[1]))
                        return false;
                break;
        default:
                return false;
        }

        dst = instr->regs[0];

        /* mov's that write to a0 or p0.x are special: */
        if (dst->num == regid(REG_P0, 0))
                return false;
        if (reg_num(dst) == REG_A0)
                return false;

        if (dst->flags & (IR3_REG_RELATIV | IR3_REG_ARRAY))
                return false;

        return true;
}

/* A move from const, which changes size but not type, can also be
 * folded into dest instruction in some cases.
 */
static inline bool is_const_mov(struct ir3_instruction *instr)
{
        if (instr->opc != OPC_MOV)
                return false;

        if (!(instr->regs[1]->flags & IR3_REG_CONST))
                return false;

        type_t src_type = instr->cat1.src_type;
        type_t dst_type = instr->cat1.dst_type;

        return (type_float(src_type) && type_float(dst_type)) ||
                (type_uint(src_type) && type_uint(dst_type)) ||
                (type_sint(src_type) && type_sint(dst_type));
}

static inline bool is_alu(struct ir3_instruction *instr)
{
        return (1 <= opc_cat(instr->opc)) && (opc_cat(instr->opc) <= 3);
}

static inline bool is_sfu(struct ir3_instruction *instr)
{
        return (opc_cat(instr->opc) == 4);
}

static inline bool is_tex(struct ir3_instruction *instr)
{
        return (opc_cat(instr->opc) == 5);
}

static inline bool is_tex_or_prefetch(struct ir3_instruction *instr)
{
        return is_tex(instr) || (instr->opc == OPC_META_TEX_PREFETCH);
}

static inline bool is_mem(struct ir3_instruction *instr)
{
        return (opc_cat(instr->opc) == 6);
}

static inline bool is_barrier(struct ir3_instruction *instr)
{
        return (opc_cat(instr->opc) == 7);
}

static inline bool
is_half(struct ir3_instruction *instr)
{
        return !!(instr->regs[0]->flags & IR3_REG_HALF);
}

static inline bool
is_high(struct ir3_instruction *instr)
{
        return !!(instr->regs[0]->flags & IR3_REG_HIGH);
}

static inline bool
is_store(struct ir3_instruction *instr)
{
        /* these instructions, the "destination" register is
         * actually a source, the address to store to.
         */
        switch (instr->opc) {
        case OPC_STG:
        case OPC_STGB:
        case OPC_STIB:
        case OPC_STP:
        case OPC_STL:
        case OPC_STLW:
        case OPC_L2G:
        case OPC_G2L:
                return true;
        default:
                return false;
        }
}

static inline bool is_load(struct ir3_instruction *instr)
{
        switch (instr->opc) {
        case OPC_LDG:
        case OPC_LDGB:
        case OPC_LDIB:
        case OPC_LDL:
        case OPC_LDP:
        case OPC_L2G:
        case OPC_LDLW:
        case OPC_LDC:
        case OPC_LDLV:
                /* probably some others too.. */
                return true;
        default:
                return false;
        }
}

static inline bool is_input(struct ir3_instruction *instr)
{
        /* in some cases, ldlv is used to fetch varying without
         * interpolation.. fortunately inloc is the first src
         * register in either case
         */
        switch (instr->opc) {
        case OPC_LDLV:
        case OPC_BARY_F:
                return true;
        default:
                return false;
        }
}

static inline bool is_bool(struct ir3_instruction *instr)
{
        switch (instr->opc) {
        case OPC_CMPS_F:
        case OPC_CMPS_S:
        case OPC_CMPS_U:
                return true;
        default:
                return false;
        }
}

static inline bool is_meta(struct ir3_instruction *instr)
{
        return (opc_cat(instr->opc) == -1);
}

static inline unsigned dest_regs(struct ir3_instruction *instr)
{
        if ((instr->regs_count == 0) || is_store(instr) || is_flow(instr))
                return 0;

        return util_last_bit(instr->regs[0]->wrmask);
}

static inline bool writes_addr0(struct ir3_instruction *instr)
{
        if (instr->regs_count > 0) {
                struct ir3_register *dst = instr->regs[0];
                return dst->num == regid(REG_A0, 0);
        }
        return false;
}

static inline bool writes_addr1(struct ir3_instruction *instr)
{
        if (instr->regs_count > 0) {
                struct ir3_register *dst = instr->regs[0];
                return dst->num == regid(REG_A0, 1);
        }
        return false;
}

static inline bool writes_pred(struct ir3_instruction *instr)
{
        if (instr->regs_count > 0) {
                struct ir3_register *dst = instr->regs[0];
                return reg_num(dst) == REG_P0;
        }
        return false;
}

/* returns defining instruction for reg */
/* TODO better name */
static inline struct ir3_instruction *ssa(struct ir3_register *reg)
{
        if (reg->flags & (IR3_REG_SSA | IR3_REG_ARRAY)) {
                return reg->instr;
        }
        return NULL;
}

static inline bool conflicts(struct ir3_instruction *a,
                struct ir3_instruction *b)
{
        return (a && b) && (a != b);
}

static inline bool reg_gpr(struct ir3_register *r)
{
        if (r->flags & (IR3_REG_CONST | IR3_REG_IMMED))
                return false;
        if ((reg_num(r) == REG_A0) || (reg_num(r) == REG_P0))
                return false;
        return true;
}

static inline type_t half_type(type_t type)
{
        switch (type) {
        case TYPE_F32: return TYPE_F16;
        case TYPE_U32: return TYPE_U16;
        case TYPE_S32: return TYPE_S16;
        case TYPE_F16:
        case TYPE_U16:
        case TYPE_S16:
                return type;
        default:
                assert(0);
                return ~0;
        }
}

/* some cat2 instructions (ie. those which are not float) can embed an
 * immediate:
 */
static inline bool ir3_cat2_int(opc_t opc)
{
        switch (opc) {
        case OPC_ADD_U:
        case OPC_ADD_S:
        case OPC_SUB_U:
        case OPC_SUB_S:
        case OPC_CMPS_U:
        case OPC_CMPS_S:
        case OPC_MIN_U:
        case OPC_MIN_S:
        case OPC_MAX_U:
        case OPC_MAX_S:
        case OPC_CMPV_U:
        case OPC_CMPV_S:
        case OPC_MUL_U24:
        case OPC_MUL_S24:
        case OPC_MULL_U:
        case OPC_CLZ_S:
        case OPC_ABSNEG_S:
        case OPC_AND_B:
        case OPC_OR_B:
        case OPC_NOT_B:
        case OPC_XOR_B:
        case OPC_BFREV_B:
        case OPC_CLZ_B:
        case OPC_SHL_B:
        case OPC_SHR_B:
        case OPC_ASHR_B:
        case OPC_MGEN_B:
        case OPC_GETBIT_B:
        case OPC_CBITS_B:
        case OPC_BARY_F:
                return true;

        default:
                return false;
        }
}

/* map cat2 instruction to valid abs/neg flags: */
static inline unsigned ir3_cat2_absneg(opc_t opc)
{
        switch (opc) {
        case OPC_ADD_F:
        case OPC_MIN_F:
        case OPC_MAX_F:
        case OPC_MUL_F:
        case OPC_SIGN_F:
        case OPC_CMPS_F:
        case OPC_ABSNEG_F:
        case OPC_CMPV_F:
        case OPC_FLOOR_F:
        case OPC_CEIL_F:
        case OPC_RNDNE_F:
        case OPC_RNDAZ_F:
        case OPC_TRUNC_F:
        case OPC_BARY_F:
                return IR3_REG_FABS | IR3_REG_FNEG;

        case OPC_ADD_U:
        case OPC_ADD_S:
        case OPC_SUB_U:
        case OPC_SUB_S:
        case OPC_CMPS_U:
        case OPC_CMPS_S:
        case OPC_MIN_U:
        case OPC_MIN_S:
        case OPC_MAX_U:
        case OPC_MAX_S:
        case OPC_CMPV_U:
        case OPC_CMPV_S:
        case OPC_MUL_U24:
        case OPC_MUL_S24:
        case OPC_MULL_U:
        case OPC_CLZ_S:
                return 0;

        case OPC_ABSNEG_S:
                return IR3_REG_SABS | IR3_REG_SNEG;

        case OPC_AND_B:
        case OPC_OR_B:
        case OPC_NOT_B:
        case OPC_XOR_B:
        case OPC_BFREV_B:
        case OPC_CLZ_B:
        case OPC_SHL_B:
        case OPC_SHR_B:
        case OPC_ASHR_B:
        case OPC_MGEN_B:
        case OPC_GETBIT_B:
        case OPC_CBITS_B:
                return IR3_REG_BNOT;

        default:
                return 0;
        }
}

/* map cat3 instructions to valid abs/neg flags: */
static inline unsigned ir3_cat3_absneg(opc_t opc)
{
        switch (opc) {
        case OPC_MAD_F16:
        case OPC_MAD_F32:
        case OPC_SEL_F16:
        case OPC_SEL_F32:
                return IR3_REG_FNEG;

        case OPC_MAD_U16:
        case OPC_MADSH_U16:
        case OPC_MAD_S16:
        case OPC_MADSH_M16:
        case OPC_MAD_U24:
        case OPC_MAD_S24:
        case OPC_SEL_S16:
        case OPC_SEL_S32:
        case OPC_SAD_S16:
        case OPC_SAD_S32:
                /* neg *may* work on 3rd src.. */

        case OPC_SEL_B16:
        case OPC_SEL_B32:

        default:
                return 0;
        }
}

#define MASK(n) ((1 << (n)) - 1)

/* iterator for an instructions's sources (reg), also returns src #: */
#define foreach_src_n(__srcreg, __n, __instr) \
        if ((__instr)->regs_count) \
                for (unsigned __cnt = (__instr)->regs_count - 1, __n = 0; __n < __cnt; __n++) \
                        if ((__srcreg = (__instr)->regs[__n + 1]))

/* iterator for an instructions's sources (reg): */
#define foreach_src(__srcreg, __instr) \
        foreach_src_n(__srcreg, __i, __instr)

static inline unsigned __ssa_src_cnt(struct ir3_instruction *instr)
{
        unsigned cnt = instr->regs_count + instr->deps_count;
        if (instr->address)
                cnt++;
        return cnt;
}

static inline struct ir3_instruction **
__ssa_srcp_n(struct ir3_instruction *instr, unsigned n)
{
        if (n == (instr->regs_count + instr->deps_count))
                return &instr->address;
        if (n >= instr->regs_count)
                return &instr->deps[n - instr->regs_count];
        if (ssa(instr->regs[n]))
                return &instr->regs[n]->instr;
        return NULL;
}

static inline bool __is_false_dep(struct ir3_instruction *instr, unsigned n)
{
        if (n == (instr->regs_count + instr->deps_count))
                return false;
        if (n >= instr->regs_count)
                return true;
        return false;
}

#define foreach_ssa_srcp_n(__srcp, __n, __instr) \
        for (struct ir3_instruction **__srcp = (void *)~0; __srcp; __srcp = NULL) \
                for (unsigned __cnt = __ssa_src_cnt(__instr), __n = 0; __n < __cnt; __n++) \
                        if ((__srcp = __ssa_srcp_n(__instr, __n)))

#define foreach_ssa_srcp(__srcp, __instr) \
        foreach_ssa_srcp_n(__srcp, __i, __instr)

/* iterator for an instruction's SSA sources (instr), also returns src #: */
#define foreach_ssa_src_n(__srcinst, __n, __instr) \
        foreach_ssa_srcp_n(__srcp, __n, __instr) \
                if ((__srcinst = *__srcp))

/* iterator for an instruction's SSA sources (instr): */
#define foreach_ssa_src(__srcinst, __instr) \
        foreach_ssa_src_n(__srcinst, __i, __instr)

/* iterators for shader inputs: */
#define foreach_input_n(__ininstr, __cnt, __ir) \
        for (unsigned __cnt = 0; __cnt < (__ir)->inputs_count; __cnt++) \
                if ((__ininstr = (__ir)->inputs[__cnt]))
#define foreach_input(__ininstr, __ir) \
        foreach_input_n(__ininstr, __i, __ir)

/* iterators for shader outputs: */
#define foreach_output_n(__outinstr, __cnt, __ir) \
        for (unsigned __cnt = 0; __cnt < (__ir)->outputs_count; __cnt++) \
                if ((__outinstr = (__ir)->outputs[__cnt]))
#define foreach_output(__outinstr, __ir) \
        foreach_output_n(__outinstr, __i, __ir)

/* iterators for instructions: */
#define foreach_instr(__instr, __list) \
        list_for_each_entry(struct ir3_instruction, __instr, __list, node)
#define foreach_instr_rev(__instr, __list) \
        list_for_each_entry_rev(struct ir3_instruction, __instr, __list, node)
#define foreach_instr_safe(__instr, __list) \
        list_for_each_entry_safe(struct ir3_instruction, __instr, __list, node)

/* iterators for blocks: */
#define foreach_block(__block, __list) \
        list_for_each_entry(struct ir3_block, __block, __list, node)
#define foreach_block_safe(__block, __list) \
        list_for_each_entry_safe(struct ir3_block, __block, __list, node)
#define foreach_block_rev(__block, __list) \
        list_for_each_entry_rev(struct ir3_block, __block, __list, node)

/* iterators for arrays: */
#define foreach_array(__array, __list) \
        list_for_each_entry(struct ir3_array, __array, __list, node)

/* dump: */
void ir3_print(struct ir3 *ir);
void ir3_print_instr(struct ir3_instruction *instr);

/* delay calculation: */
int ir3_delayslots(struct ir3_instruction *assigner,
                struct ir3_instruction *consumer, unsigned n, bool soft);
unsigned ir3_delay_calc(struct ir3_block *block, struct ir3_instruction *instr,
                bool soft, bool pred);
void ir3_remove_nops(struct ir3 *ir);

/* dead code elimination: */
struct ir3_shader_variant;
void ir3_dce(struct ir3 *ir, struct ir3_shader_variant *so);

/* fp16 conversion folding */
void ir3_cf(struct ir3 *ir);

/* copy-propagate: */
void ir3_cp(struct ir3 *ir, struct ir3_shader_variant *so);

/* group neighbors and insert mov's to resolve conflicts: */
void ir3_group(struct ir3 *ir);

/* Sethi–Ullman numbering: */
void ir3_sun(struct ir3 *ir);

/* scheduling: */
void ir3_sched_add_deps(struct ir3 *ir);
int ir3_sched(struct ir3 *ir);

struct ir3_context;
int ir3_postsched(struct ir3_context *ctx);

bool ir3_a6xx_fixup_atomic_dests(struct ir3 *ir, struct ir3_shader_variant *so);

/* register assignment: */
struct ir3_ra_reg_set * ir3_ra_alloc_reg_set(struct ir3_compiler *compiler);
int ir3_ra(struct ir3_shader_variant *v, struct ir3_instruction **precolor, unsigned nprecolor);

/* legalize: */
void ir3_legalize(struct ir3 *ir, struct ir3_shader_variant *so, int *max_bary);

static inline bool
ir3_has_latency_to_hide(struct ir3 *ir)
{
        /* VS/GS/TCS/TESS  co-exist with frag shader invocations, but we don't
         * know the nature of the fragment shader.  Just assume it will have
         * latency to hide:
         */
        if (ir->type != MESA_SHADER_FRAGMENT)
                return true;

        foreach_block (block, &ir->block_list) {
                foreach_instr (instr, &block->instr_list) {
                        if (is_tex_or_prefetch(instr))
                                return true;

                        if (is_load(instr)) {
                                switch (instr->opc) {
                                case OPC_LDLV:
                                case OPC_LDL:
                                case OPC_LDLW:
                                        break;
                                default:
                                        return true;
                                }
                        }
                }
        }

        return false;
}

/* ************************************************************************* */
/* instruction helpers */

/* creates SSA src of correct type (ie. half vs full precision) */
static inline struct ir3_register * __ssa_src(struct ir3_instruction *instr,
                struct ir3_instruction *src, unsigned flags)
{
        struct ir3_register *reg;
        if (src->regs[0]->flags & IR3_REG_HALF)
                flags |= IR3_REG_HALF;
        reg = ir3_reg_create(instr, 0, IR3_REG_SSA | flags);
        reg->instr = src;
        reg->wrmask = src->regs[0]->wrmask;
        return reg;
}

static inline struct ir3_register * __ssa_dst(struct ir3_instruction *instr)
{
        struct ir3_register *reg = ir3_reg_create(instr, 0, 0);
        reg->flags |= IR3_REG_SSA;
        return reg;
}

static inline struct ir3_instruction *
create_immed_typed(struct ir3_block *block, uint32_t val, type_t type)
{
        struct ir3_instruction *mov;
        unsigned flags = (type_size(type) < 32) ? IR3_REG_HALF : 0;

        mov = ir3_instr_create(block, OPC_MOV);
        mov->cat1.src_type = type;
        mov->cat1.dst_type = type;
        __ssa_dst(mov)->flags |= flags;
        ir3_reg_create(mov, 0, IR3_REG_IMMED | flags)->uim_val = val;

        return mov;
}

static inline struct ir3_instruction *
create_immed(struct ir3_block *block, uint32_t val)
{
        return create_immed_typed(block, val, TYPE_U32);
}

static inline struct ir3_instruction *
create_uniform_typed(struct ir3_block *block, unsigned n, type_t type)
{
        struct ir3_instruction *mov;
        unsigned flags = (type_size(type) < 32) ? IR3_REG_HALF : 0;

        mov = ir3_instr_create(block, OPC_MOV);
        mov->cat1.src_type = type;
        mov->cat1.dst_type = type;
        __ssa_dst(mov)->flags |= flags;
        ir3_reg_create(mov, n, IR3_REG_CONST | flags);

        return mov;
}

static inline struct ir3_instruction *
create_uniform(struct ir3_block *block, unsigned n)
{
        return create_uniform_typed(block, n, TYPE_F32);
}

static inline struct ir3_instruction *
create_uniform_indirect(struct ir3_block *block, int n,
                struct ir3_instruction *address)
{
        struct ir3_instruction *mov;

        mov = ir3_instr_create(block, OPC_MOV);
        mov->cat1.src_type = TYPE_U32;
        mov->cat1.dst_type = TYPE_U32;
        __ssa_dst(mov);
        ir3_reg_create(mov, 0, IR3_REG_CONST | IR3_REG_RELATIV)->array.offset = n;

        ir3_instr_set_address(mov, address);

        return mov;
}

static inline struct ir3_instruction *
ir3_MOV(struct ir3_block *block, struct ir3_instruction *src, type_t type)
{
        struct ir3_instruction *instr = ir3_instr_create(block, OPC_MOV);
        __ssa_dst(instr);
        if (src->regs[0]->flags & IR3_REG_ARRAY) {
                struct ir3_register *src_reg = __ssa_src(instr, src, IR3_REG_ARRAY);
                src_reg->array = src->regs[0]->array;
        } else {
                __ssa_src(instr, src, src->regs[0]->flags & IR3_REG_HIGH);
        }
        debug_assert(!(src->regs[0]->flags & IR3_REG_RELATIV));
        instr->cat1.src_type = type;
        instr->cat1.dst_type = type;
        return instr;
}

static inline struct ir3_instruction *
ir3_COV(struct ir3_block *block, struct ir3_instruction *src,
                type_t src_type, type_t dst_type)
{
        struct ir3_instruction *instr = ir3_instr_create(block, OPC_MOV);
        unsigned dst_flags = (type_size(dst_type) < 32) ? IR3_REG_HALF : 0;
        unsigned src_flags = (type_size(src_type) < 32) ? IR3_REG_HALF : 0;

        debug_assert((src->regs[0]->flags & IR3_REG_HALF) == src_flags);

        __ssa_dst(instr)->flags |= dst_flags;
        __ssa_src(instr, src, 0);
        instr->cat1.src_type = src_type;
        instr->cat1.dst_type = dst_type;
        debug_assert(!(src->regs[0]->flags & IR3_REG_ARRAY));
        return instr;
}

static inline struct ir3_instruction *
ir3_NOP(struct ir3_block *block)
{
        return ir3_instr_create(block, OPC_NOP);
}

#define IR3_INSTR_0 0

#define __INSTR0(flag, name, opc)                                        \
static inline struct ir3_instruction *                                   \
ir3_##name(struct ir3_block *block)                                      \
{                                                                        \
        struct ir3_instruction *instr =                                      \
                ir3_instr_create(block, opc);                                    \
        instr->flags |= flag;                                                \
        return instr;                                                        \
}
#define INSTR0F(f, name)    __INSTR0(IR3_INSTR_##f, name##_##f, OPC_##name)
#define INSTR0(name)        __INSTR0(0, name, OPC_##name)

#define __INSTR1(flag, name, opc)                                        \
static inline struct ir3_instruction *                                   \
ir3_##name(struct ir3_block *block,                                      \
                struct ir3_instruction *a, unsigned aflags)                      \
{                                                                        \
        struct ir3_instruction *instr =                                      \
                ir3_instr_create(block, opc);                                    \
        __ssa_dst(instr);                                                    \
        __ssa_src(instr, a, aflags);                                         \
        instr->flags |= flag;                                                \
        return instr;                                                        \
}
#define INSTR1F(f, name)    __INSTR1(IR3_INSTR_##f, name##_##f, OPC_##name)
#define INSTR1(name)        __INSTR1(0, name, OPC_##name)

#define __INSTR2(flag, name, opc)                                        \
static inline struct ir3_instruction *                                   \
ir3_##name(struct ir3_block *block,                                      \
                struct ir3_instruction *a, unsigned aflags,                      \
                struct ir3_instruction *b, unsigned bflags)                      \
{                                                                        \
        struct ir3_instruction *instr =                                      \
                ir3_instr_create(block, opc);                                    \
        __ssa_dst(instr);                                                    \
        __ssa_src(instr, a, aflags);                                         \
        __ssa_src(instr, b, bflags);                                         \
        instr->flags |= flag;                                                \
        return instr;                                                        \
}
#define INSTR2F(f, name)    __INSTR2(IR3_INSTR_##f, name##_##f, OPC_##name)
#define INSTR2(name)        __INSTR2(0, name, OPC_##name)

#define __INSTR3(flag, name, opc)                                        \
static inline struct ir3_instruction *                                   \
ir3_##name(struct ir3_block *block,                                      \
                struct ir3_instruction *a, unsigned aflags,                      \
                struct ir3_instruction *b, unsigned bflags,                      \
                struct ir3_instruction *c, unsigned cflags)                      \
{                                                                        \
        struct ir3_instruction *instr =                                      \
                ir3_instr_create2(block, opc, 4);                                \
        __ssa_dst(instr);                                                    \
        __ssa_src(instr, a, aflags);                                         \
        __ssa_src(instr, b, bflags);                                         \
        __ssa_src(instr, c, cflags);                                         \
        instr->flags |= flag;                                                \
        return instr;                                                        \
}
#define INSTR3F(f, name)    __INSTR3(IR3_INSTR_##f, name##_##f, OPC_##name)
#define INSTR3(name)        __INSTR3(0, name, OPC_##name)

#define __INSTR4(flag, name, opc)                                        \
static inline struct ir3_instruction *                                   \
ir3_##name(struct ir3_block *block,                                      \
                struct ir3_instruction *a, unsigned aflags,                      \
                struct ir3_instruction *b, unsigned bflags,                      \
                struct ir3_instruction *c, unsigned cflags,                      \
                struct ir3_instruction *d, unsigned dflags)                      \
{                                                                        \
        struct ir3_instruction *instr =                                      \
                ir3_instr_create2(block, opc, 5);                                \
        __ssa_dst(instr);                                                    \
        __ssa_src(instr, a, aflags);                                         \
        __ssa_src(instr, b, bflags);                                         \
        __ssa_src(instr, c, cflags);                                         \
        __ssa_src(instr, d, dflags);                                         \
        instr->flags |= flag;                                                \
        return instr;                                                        \
}
#define INSTR4F(f, name)    __INSTR4(IR3_INSTR_##f, name##_##f, OPC_##name)
#define INSTR4(name)        __INSTR4(0, name, OPC_##name)

/* cat0 instructions: */
INSTR1(BR)
INSTR0(JUMP)
INSTR1(KILL)
INSTR0(END)
INSTR0(CHSH)
INSTR0(CHMASK)
INSTR1(IF)
INSTR0(ELSE)
INSTR0(ENDIF)

/* cat2 instructions, most 2 src but some 1 src: */
INSTR2(ADD_F)
INSTR2(MIN_F)
INSTR2(MAX_F)
INSTR2(MUL_F)
INSTR1(SIGN_F)
INSTR2(CMPS_F)
INSTR1(ABSNEG_F)
INSTR2(CMPV_F)
INSTR1(FLOOR_F)
INSTR1(CEIL_F)
INSTR1(RNDNE_F)
INSTR1(RNDAZ_F)
INSTR1(TRUNC_F)
INSTR2(ADD_U)
INSTR2(ADD_S)
INSTR2(SUB_U)
INSTR2(SUB_S)
INSTR2(CMPS_U)
INSTR2(CMPS_S)
INSTR2(MIN_U)
INSTR2(MIN_S)
INSTR2(MAX_U)
INSTR2(MAX_S)
INSTR1(ABSNEG_S)
INSTR2(AND_B)
INSTR2(OR_B)
INSTR1(NOT_B)
INSTR2(XOR_B)
INSTR2(CMPV_U)
INSTR2(CMPV_S)
INSTR2(MUL_U24)
INSTR2(MUL_S24)
INSTR2(MULL_U)
INSTR1(BFREV_B)
INSTR1(CLZ_S)
INSTR1(CLZ_B)
INSTR2(SHL_B)
INSTR2(SHR_B)
INSTR2(ASHR_B)
INSTR2(BARY_F)
INSTR2(MGEN_B)
INSTR2(GETBIT_B)
INSTR1(SETRM)
INSTR1(CBITS_B)
INSTR2(SHB)
INSTR2(MSAD)

/* cat3 instructions: */
INSTR3(MAD_U16)
INSTR3(MADSH_U16)
INSTR3(MAD_S16)
INSTR3(MADSH_M16)
INSTR3(MAD_U24)
INSTR3(MAD_S24)
INSTR3(MAD_F16)
INSTR3(MAD_F32)
/* NOTE: SEL_B32 checks for zero vs nonzero */
INSTR3(SEL_B16)
INSTR3(SEL_B32)
INSTR3(SEL_S16)
INSTR3(SEL_S32)
INSTR3(SEL_F16)
INSTR3(SEL_F32)
INSTR3(SAD_S16)
INSTR3(SAD_S32)

/* cat4 instructions: */
INSTR1(RCP)
INSTR1(RSQ)
INSTR1(HRSQ)
INSTR1(LOG2)
INSTR1(HLOG2)
INSTR1(EXP2)
INSTR1(HEXP2)
INSTR1(SIN)
INSTR1(COS)
INSTR1(SQRT)

/* cat5 instructions: */
INSTR1(DSX)
INSTR1(DSXPP_1)
INSTR1(DSY)
INSTR1(DSYPP_1)
INSTR1F(3D, DSX)
INSTR1F(3D, DSY)
INSTR1(RGETPOS)

static inline struct ir3_instruction *
ir3_SAM(struct ir3_block *block, opc_t opc, type_t type,
                unsigned wrmask, unsigned flags, struct ir3_instruction *samp_tex,
                struct ir3_instruction *src0, struct ir3_instruction *src1)
{
        struct ir3_instruction *sam;

        sam = ir3_instr_create(block, opc);
        sam->flags |= flags;
        __ssa_dst(sam)->wrmask = wrmask;
        if (flags & IR3_INSTR_S2EN) {
                __ssa_src(sam, samp_tex, IR3_REG_HALF);
        }
        if (src0) {
                __ssa_src(sam, src0, 0);
        }
        if (src1) {
                __ssa_src(sam, src1, 0);
        }
        sam->cat5.type  = type;

        return sam;
}

/* cat6 instructions: */
INSTR2(LDLV)
INSTR3(LDG)
INSTR3(LDL)
INSTR3(LDLW)
INSTR3(STG)
INSTR3(STL)
INSTR3(STLW)
INSTR1(RESINFO)
INSTR1(RESFMT)
INSTR2(ATOMIC_ADD)
INSTR2(ATOMIC_SUB)
INSTR2(ATOMIC_XCHG)
INSTR2(ATOMIC_INC)
INSTR2(ATOMIC_DEC)
INSTR2(ATOMIC_CMPXCHG)
INSTR2(ATOMIC_MIN)
INSTR2(ATOMIC_MAX)
INSTR2(ATOMIC_AND)
INSTR2(ATOMIC_OR)
INSTR2(ATOMIC_XOR)
INSTR2(LDC)
#if GPU >= 600
INSTR3(STIB);
INSTR2(LDIB);
INSTR3F(G, ATOMIC_ADD)
INSTR3F(G, ATOMIC_SUB)
INSTR3F(G, ATOMIC_XCHG)
INSTR3F(G, ATOMIC_INC)
INSTR3F(G, ATOMIC_DEC)
INSTR3F(G, ATOMIC_CMPXCHG)
INSTR3F(G, ATOMIC_MIN)
INSTR3F(G, ATOMIC_MAX)
INSTR3F(G, ATOMIC_AND)
INSTR3F(G, ATOMIC_OR)
INSTR3F(G, ATOMIC_XOR)
#elif GPU >= 400
INSTR3(LDGB)
INSTR4(STGB)
INSTR4(STIB)
INSTR4F(G, ATOMIC_ADD)
INSTR4F(G, ATOMIC_SUB)
INSTR4F(G, ATOMIC_XCHG)
INSTR4F(G, ATOMIC_INC)
INSTR4F(G, ATOMIC_DEC)
INSTR4F(G, ATOMIC_CMPXCHG)
INSTR4F(G, ATOMIC_MIN)
INSTR4F(G, ATOMIC_MAX)
INSTR4F(G, ATOMIC_AND)
INSTR4F(G, ATOMIC_OR)
INSTR4F(G, ATOMIC_XOR)
#endif

INSTR4F(G, STG)

/* cat7 instructions: */
INSTR0(BAR)
INSTR0(FENCE)

/* meta instructions: */
INSTR0(META_TEX_PREFETCH);

/* ************************************************************************* */
/* split this out or find some helper to use.. like main/bitset.h.. */

#include <string.h>
#include "util/bitset.h"

#define MAX_REG 256

typedef BITSET_DECLARE(regmask_t, 2 * MAX_REG);

static inline bool
__regmask_get(regmask_t *regmask, struct ir3_register *reg, unsigned n)
{
        if (reg->merged) {
                /* a6xx+ case, with merged register file, we track things in terms
                 * of half-precision registers, with a full precisions register
                 * using two half-precision slots:
                 */
                if (reg->flags & IR3_REG_HALF) {
                        return BITSET_TEST(*regmask, n);
                } else {
                        n *= 2;
                        return BITSET_TEST(*regmask, n) || BITSET_TEST(*regmask, n+1);
                }
        } else {
                /* pre a6xx case, with separate register file for half and full
                 * precision:
                 */
                if (reg->flags & IR3_REG_HALF)
                        n += MAX_REG;
                return BITSET_TEST(*regmask, n);
        }
}

static inline void
__regmask_set(regmask_t *regmask, struct ir3_register *reg, unsigned n)
{
        if (reg->merged) {
                /* a6xx+ case, with merged register file, we track things in terms
                 * of half-precision registers, with a full precisions register
                 * using two half-precision slots:
                 */
                if (reg->flags & IR3_REG_HALF) {
                        BITSET_SET(*regmask, n);
                } else {
                        n *= 2;
                        BITSET_SET(*regmask, n);
                        BITSET_SET(*regmask, n+1);
                }
        } else {
                /* pre a6xx case, with separate register file for half and full
                 * precision:
                 */
                if (reg->flags & IR3_REG_HALF)
                        n += MAX_REG;
                BITSET_SET(*regmask, n);
        }
}

static inline void regmask_init(regmask_t *regmask)
{
        memset(regmask, 0, sizeof(*regmask));
}

static inline void regmask_set(regmask_t *regmask, struct ir3_register *reg)
{
        if (reg->flags & IR3_REG_RELATIV) {
                for (unsigned i = 0; i < reg->size; i++)
                        __regmask_set(regmask, reg, reg->array.offset + i);
        } else {
                for (unsigned mask = reg->wrmask, n = reg->num; mask; mask >>= 1, n++)
                        if (mask & 1)
                                __regmask_set(regmask, reg, n);
        }
}

static inline void regmask_or(regmask_t *dst, regmask_t *a, regmask_t *b)
{
        unsigned i;
        for (i = 0; i < ARRAY_SIZE(*dst); i++)
                (*dst)[i] = (*a)[i] | (*b)[i];
}

static inline bool regmask_get(regmask_t *regmask,
                struct ir3_register *reg)
{
        if (reg->flags & IR3_REG_RELATIV) {
                for (unsigned i = 0; i < reg->size; i++)
                        if (__regmask_get(regmask, reg, reg->array.offset + i))
                                return true;
        } else {
                for (unsigned mask = reg->wrmask, n = reg->num; mask; mask >>= 1, n++)
                        if (mask & 1)
                                if (__regmask_get(regmask, reg, n))
                                        return true;
        }
        return false;
}

/* ************************************************************************* */

#endif /* IR3_H_ */