src/gallium/auxiliary/draw/draw_pipe_wide_point.c

   1 /**************************************************************************
   2  *
   3  * Copyright 2007 Tungsten Graphics, Inc., Cedar Park, Texas.
   4  * All Rights Reserved.
   5  *
   6  * Permission is hereby granted, free of charge, to any person obtaining a
   7  * copy of this software and associated documentation files (the
   8  * "Software"), to deal in the Software without restriction, including
   9  * without limitation the rights to use, copy, modify, merge, publish,
  10  * distribute, sub license, and/or sell copies of the Software, and to
  11  * permit persons to whom the Software is furnished to do so, subject to
  12  * the following conditions:
  13  *
  14  * The above copyright notice and this permission notice (including the
  15  * next paragraph) shall be included in all copies or substantial portions
  16  * of the Software.
  17  *
  18  * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
  19  * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
  20  * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT.
  21  * IN NO EVENT SHALL TUNGSTEN GRAPHICS AND/OR ITS SUPPLIERS BE LIABLE FOR
  22  * ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT,
  23  * TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE
  24  * SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.
  25  *
  26  **************************************************************************/
  27
  28 /* Authors:  Keith Whitwell <keith@tungstengraphics.com>
  29  */
  30
  31 /**
  32  * Notes on wide points and sprite mode:
  33  *
  34  * In wide point/sprite mode we effectively need to convert each incoming
  35  * vertex into four outgoing vertices specifying the corners of a quad.
  36  * Since we don't (yet) have geometry shaders, we have to handle this here
  37  * in the draw module.
  38  *
  39  * For sprites, it also means that this is where we have to handle texcoords
  40  * for the vertices of the quad.  OpenGL's GL_COORD_REPLACE state specifies
  41  * if/how enabled texcoords are automatically generated for sprites.  We pass
  42  * that info through gallium in the pipe_rasterizer_state::sprite_coord_mode
  43  * array.
  44  *
  45  * Additionally, GLSL's gl_PointCoord fragment attribute has to be handled
  46  * here as well.  This is basically an additional texture/generic attribute
  47  * that varies .x from 0 to 1 horizontally across the point and varies .y
  48  * vertically from 0 to 1 down the sprite.
  49  *
  50  * With geometry shaders, the state tracker could create a GS to do
  51  * most/all of this.
  52  */
  53
  54
  55 #include "pipe/p_context.h"
  56 #include "util/u_math.h"
  57 #include "util/u_memory.h"
  58 #include "pipe/p_defines.h"
  59 #include "pipe/p_shader_tokens.h"
  60 #include "draw_vs.h"
  61 #include "draw_pipe.h"
  62
  63
  64 struct widepoint_stage {
  65    struct draw_stage stage;
  66
  67    float half_point_size;
  68
  69    float xbias;
  70    float ybias;
  71
  72    uint texcoord_slot[PIPE_MAX_SHADER_OUTPUTS];
  73    uint texcoord_enable[PIPE_MAX_SHADER_OUTPUTS];
  74    uint num_texcoords;
  75    uint texcoord_mode;
  76
  77    int psize_slot;
  78
  79    int point_coord_fs_input;  /**< input for pointcoord */
  80 };
  81
  82
  83
  84 static INLINE struct widepoint_stage *
  85 widepoint_stage( struct draw_stage *stage )
  86 {
  87    return (struct widepoint_stage *)stage;
  88 }
  89
  90
  91 /**
  92  * Set the vertex texcoords for sprite mode.
  93  * Coords may be left untouched or set to a right-side-up or upside-down
  94  * orientation.
  95  */
  96 static void set_texcoords(const struct widepoint_stage *wide,
  97                           struct vertex_header *v, const float tc[4])
  98 {
  99    uint i;
 100    for (i = 0; i < wide->num_texcoords; i++) {
 101       if (wide->texcoord_enable[i]) {
 102          uint j = wide->texcoord_slot[i];
 103          v->data[j][0] = tc[0];
 104          if (wide->texcoord_mode == PIPE_SPRITE_COORD_LOWER_LEFT)
 105             v->data[j][1] = 1.0f - tc[1];
 106          else
 107             v->data[j][1] = tc[1];
 108          v->data[j][2] = tc[2];
 109          v->data[j][3] = tc[3];
 110       }
 111    }
 112
 113    if (wide->point_coord_fs_input >= 0) {
 114       /* put gl_PointCoord into the extra vertex slot */
 115       uint slot = wide->stage.draw->extra_shader_outputs.slot;
 116       v->data[slot][0] = tc[0];
 117       if (wide->texcoord_mode == PIPE_SPRITE_COORD_LOWER_LEFT)
 118          v->data[slot][1] = 1.0f - tc[1];
 119       else
 120          v->data[slot][1] = tc[1];
 121       v->data[slot][2] = 0.0F;
 122       v->data[slot][3] = 1.0F;
 123    }
 124 }
 125
 126
 127 /* If there are lots of sprite points (and why wouldn't there be?) it
 128  * would probably be more sensible to change hardware setup to
 129  * optimize this rather than doing the whole thing in software like
 130  * this.
 131  */
 132 static void widepoint_point( struct draw_stage *stage,
 133                              struct prim_header *header )
 134 {
 135    const struct widepoint_stage *wide = widepoint_stage(stage);
 136    const unsigned pos = draw_current_shader_position_output(stage->draw);
 137    const boolean sprite = (boolean) stage->draw->rasterizer->point_quad_rasterization;
 138    float half_size;
 139    float left_adj, right_adj, bot_adj, top_adj;
 140
 141    struct prim_header tri;
 142
 143    /* four dups of original vertex */
 144    struct vertex_header *v0 = dup_vert(stage, header->v[0], 0);
 145    struct vertex_header *v1 = dup_vert(stage, header->v[0], 1);
 146    struct vertex_header *v2 = dup_vert(stage, header->v[0], 2);
 147    struct vertex_header *v3 = dup_vert(stage, header->v[0], 3);
 148
 149    float *pos0 = v0->data[pos];
 150    float *pos1 = v1->data[pos];
 151    float *pos2 = v2->data[pos];
 152    float *pos3 = v3->data[pos];
 153
 154    /* point size is either per-vertex or fixed size */
 155    if (wide->psize_slot >= 0) {
 156       half_size = header->v[0]->data[wide->psize_slot][0];
 157       half_size *= 0.5f;
 158    }
 159    else {
 160       half_size = wide->half_point_size;
 161    }
 162
 163    left_adj = -half_size + wide->xbias;
 164    right_adj = half_size + wide->xbias;
 165    bot_adj = half_size + wide->ybias;
 166    top_adj = -half_size + wide->ybias;
 167
 168    pos0[0] += left_adj;
 169    pos0[1] += top_adj;
 170
 171    pos1[0] += left_adj;
 172    pos1[1] += bot_adj;
 173
 174    pos2[0] += right_adj;
 175    pos2[1] += top_adj;
 176
 177    pos3[0] += right_adj;
 178    pos3[1] += bot_adj;
 179
 180    if (sprite) {
 181       static const float tex00[4] = { 0, 0, 0, 1 };
 182       static const float tex01[4] = { 0, 1, 0, 1 };
 183       static const float tex11[4] = { 1, 1, 0, 1 };
 184       static const float tex10[4] = { 1, 0, 0, 1 };
 185       set_texcoords( wide, v0, tex00 );
 186       set_texcoords( wide, v1, tex01 );
 187       set_texcoords( wide, v2, tex10 );
 188       set_texcoords( wide, v3, tex11 );
 189    }
 190
 191    tri.det = header->det;  /* only the sign matters */
 192    tri.v[0] = v0;
 193    tri.v[1] = v2;
 194    tri.v[2] = v3;
 195    stage->next->tri( stage->next, &tri );
 196
 197    tri.v[0] = v0;
 198    tri.v[1] = v3;
 199    tri.v[2] = v1;
 200    stage->next->tri( stage->next, &tri );
 201 }
 202
 203
 204 static int
 205 find_pntc_input_attrib(struct draw_context *draw)
 206 {
 207    /* Scan the fragment program's input decls to find the pointcoord
 208     * attribute.  The xy components will store the point coord.
 209     */
 210    return 0; /* XXX fix this */
 211 }
 212
 213
 214 static void widepoint_first_point( struct draw_stage *stage,
 215                               struct prim_header *header )
 216 {
 217    struct widepoint_stage *wide = widepoint_stage(stage);
 218    struct draw_context *draw = stage->draw;
 219    struct pipe_context *pipe = draw->pipe;
 220    const struct pipe_rasterizer_state *rast = draw->rasterizer;
 221    void *r;
 222
 223    wide->half_point_size = 0.5f * rast->point_size;
 224    wide->xbias = 0.0;
 225    wide->ybias = 0.0;
 226
 227    if (rast->gl_rasterization_rules) {
 228       wide->xbias = 0.125;
 229    }
 230
 231    /* Disable triangle culling, stippling, unfilled mode etc. */
 232    r = draw_get_rasterizer_no_cull(draw, rast->scissor, rast->flatshade);
 233    draw->suspend_flushing = TRUE;
 234    pipe->bind_rasterizer_state(pipe, r);
 235    draw->suspend_flushing = FALSE;
 236
 237    /* XXX we won't know the real size if it's computed by the vertex shader! */
 238    if ((rast->point_size > draw->pipeline.wide_point_threshold) ||
 239        (rast->point_quad_rasterization && draw->pipeline.point_sprite)) {
 240       stage->point = widepoint_point;
 241    }
 242    else {
 243       stage->point = draw_pipe_passthrough_point;
 244    }
 245
 246    if (rast->point_quad_rasterization) {
 247       /* find vertex shader texcoord outputs */
 248       const struct draw_vertex_shader *vs = draw->vs.vertex_shader;
 249       uint i, j = 0;
 250       wide->texcoord_mode = rast->sprite_coord_mode;
 251       for (i = 0; i < vs->info.num_outputs; i++) {
 252          if (vs->info.output_semantic_name[i] == TGSI_SEMANTIC_GENERIC) {
 253             wide->texcoord_slot[j] = i;
 254             wide->texcoord_enable[j] = (rast->sprite_coord_enable >> j) & 1;
 255             j++;
 256          }
 257       }
 258       wide->num_texcoords = j;
 259
 260       /* find fragment shader PointCoord input */
 261       wide->point_coord_fs_input = find_pntc_input_attrib(draw);
 262
 263       /* setup extra vp output (point coord implemented as a texcoord) */
 264       draw->extra_shader_outputs.semantic_name = TGSI_SEMANTIC_GENERIC;
 265       draw->extra_shader_outputs.semantic_index = 0;
 266       draw->extra_shader_outputs.slot = draw_current_shader_outputs(draw);
 267    }
 268    else {
 269       wide->point_coord_fs_input = -1;
 270       draw->extra_shader_outputs.slot = 0;
 271    }
 272
 273    wide->psize_slot = -1;
 274    if (rast->point_size_per_vertex) {
 275       /* find PSIZ vertex output */
 276       const struct draw_vertex_shader *vs = draw->vs.vertex_shader;
 277       uint i;
 278       for (i = 0; i < vs->info.num_outputs; i++) {
 279          if (vs->info.output_semantic_name[i] == TGSI_SEMANTIC_PSIZE) {
 280             wide->psize_slot = i;
 281             break;
 282          }
 283       }
 284    }
 285
 286    stage->point( stage, header );
 287 }
 288
 289
 290 static void widepoint_flush( struct draw_stage *stage, unsigned flags )
 291 {
 292    struct draw_context *draw = stage->draw;
 293    struct pipe_context *pipe = draw->pipe;
 294
 295    stage->point = widepoint_first_point;
 296    stage->next->flush( stage->next, flags );
 297    stage->draw->extra_shader_outputs.slot = 0;
 298
 299    /* restore original rasterizer state */
 300    if (draw->rast_handle) {
 301       draw->suspend_flushing = TRUE;
 302       pipe->bind_rasterizer_state(pipe, draw->rast_handle);
 303       draw->suspend_flushing = FALSE;
 304    }
 305 }
 306
 307
 308 static void widepoint_reset_stipple_counter( struct draw_stage *stage )
 309 {
 310    stage->next->reset_stipple_counter( stage->next );
 311 }
 312
 313
 314 static void widepoint_destroy( struct draw_stage *stage )
 315 {
 316    draw_free_temp_verts( stage );
 317    FREE( stage );
 318 }
 319
 320
 321 struct draw_stage *draw_wide_point_stage( struct draw_context *draw )
 322 {
 323    struct widepoint_stage *wide = CALLOC_STRUCT(widepoint_stage);
 324    if (wide == NULL)
 325       goto fail;
 326
 327    if (!draw_alloc_temp_verts( &wide->stage, 4 ))
 328       goto fail;
 329
 330    wide->stage.draw = draw;
 331    wide->stage.name = "wide-point";
 332    wide->stage.next = NULL;
 333    wide->stage.point = widepoint_first_point;
 334    wide->stage.line = draw_pipe_passthrough_line;
 335    wide->stage.tri = draw_pipe_passthrough_tri;
 336    wide->stage.flush = widepoint_flush;
 337    wide->stage.reset_stipple_counter = widepoint_reset_stipple_counter;
 338    wide->stage.destroy = widepoint_destroy;
 339
 340    return &wide->stage;
 341
 342  fail:
 343    if (wide)
 344       wide->stage.destroy( &wide->stage );
 345
 346    return NULL;
 347 }