language: c sudo: false dist: trusty cache: apt: true ccache: true env: global: - XORG_RELEASES=http://xorg.freedesktop.org/releases/individual - XCB_RELEASES=http://xcb.freedesktop.org/dist - WAYLAND_RELEASES=http://wayland.freedesktop.org/releases - XORGMACROS_VERSION=util-macros-1.19.0 - GLPROTO_VERSION=glproto-1.4.17 - DRI2PROTO_VERSION=dri2proto-2.8 - LIBPCIACCESS_VERSION=libpciaccess-0.13.4 - LIBDRM_VERSION=libdrm-2.4.74 - XCBPROTO_VERSION=xcb-proto-1.11 - LIBXCB_VERSION=libxcb-1.11 - LIBXSHMFENCE_VERSION=libxshmfence-1.2 - LIBTXC_DXTN_VERSION=libtxc_dxtn-1.0.1 - LIBVDPAU_VERSION=libvdpau-1.1 - LIBVA_VERSION=libva-1.6.2 - LIBWAYLAND_VERSION=wayland-1.11.1 - WAYLAND_PROTOCOLS_VERSION=wayland-protocols-1.8 - PKG_CONFIG_PATH=$HOME/prefix/lib/pkgconfig:$HOME/prefix/share/pkgconfig - LD_LIBRARY_PATH="$HOME/prefix/lib:$LD_LIBRARY_PATH" matrix: include: - env: - LABEL="make loaders/classic DRI" - BUILD=make - MAKEFLAGS="-j4" - MAKE_CHECK_COMMAND="make check" - DRI_LOADERS="--enable-glx --enable-gbm --enable-egl --with-platforms=x11,drm,surfaceless,wayland --enable-osmesa" - DRI_DRIVERS="i915,i965,radeon,r200,swrast,nouveau" - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx --disable-gallium-osmesa" - GALLIUM_DRIVERS="" - VULKAN_DRIVERS="" addons: apt: packages: - xz-utils - x11proto-xf86vidmode-dev - libexpat1-dev - libx11-xcb-dev - libxdamage-dev - libxfixes-dev - env: # NOTE: Building SWR is 2x (yes two) times slower than all the other # gallium drivers combined. # Start this early so that it doesn't hunder the run time. - LABEL="make Gallium Drivers SWR" - BUILD=make - MAKEFLAGS="-j4" - MAKE_CHECK_COMMAND="true" - LLVM_VERSION=3.9 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}" - OVERRIDE_CC="gcc-4.8" - OVERRIDE_CXX="g++-4.8" - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl" - DRI_DRIVERS="" - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx --disable-gallium-osmesa" - GALLIUM_DRIVERS="swr" - VULKAN_DRIVERS="" addons: apt: sources: - llvm-toolchain-trusty-3.9 packages: # LLVM packaging is broken and misses these dependencies - libedit-dev # From sources above - llvm-3.9-dev # Common - xz-utils - x11proto-xf86vidmode-dev - libexpat1-dev - libx11-xcb-dev - libelf-dev - env: - LABEL="make Gallium Drivers Other" - BUILD=make - MAKEFLAGS="-j4" - MAKE_CHECK_COMMAND="true" - LLVM_VERSION=3.9 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}" - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl" - DRI_DRIVERS="" - GALLIUM_ST="--enable-dri --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx --disable-gallium-osmesa" - GALLIUM_DRIVERS="i915,nouveau,pl111,r300,r600,radeonsi,freedreno,svga,swrast,vc4,virgl,etnaviv,imx" - VULKAN_DRIVERS="" addons: apt: sources: - llvm-toolchain-trusty-3.9 packages: # LLVM packaging is broken and misses these dependencies - libedit-dev # From sources above - llvm-3.9-dev # Common - xz-utils - x11proto-xf86vidmode-dev - libexpat1-dev - libx11-xcb-dev - libelf-dev - env: # NOTE: Analogous to SWR above, building Clover is quite slow. - LABEL="make Gallium ST Clover" - BUILD=make - MAKEFLAGS="-j4" - MAKE_CHECK_COMMAND="true" - LLVM_VERSION=3.6 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}" - OVERRIDE_CC=gcc-4.7 - OVERRIDE_CXX=g++-4.7 - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl" - DRI_DRIVERS="" - GALLIUM_ST="--disable-dri --enable-opencl --enable-opencl-icd --enable-llvm --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx --disable-gallium-osmesa" # i915 most likely doesn't work with OpenCL. # Regardless - we're doing a quick build test here. - GALLIUM_DRIVERS="i915" - VULKAN_DRIVERS="" addons: apt: sources: - llvm-toolchain-trusty-3.6 packages: - libclc-dev # LLVM packaging is broken and misses these dependencies - libedit-dev - g++-4.7 # From sources above - llvm-3.6-dev - clang-3.6 - libclang-3.6-dev # Common - xz-utils - x11proto-xf86vidmode-dev - libexpat1-dev - libx11-xcb-dev - libelf-dev - env: - LABEL="make Gallium ST Other" - BUILD=make - MAKEFLAGS="-j4" - MAKE_CHECK_COMMAND="true" - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl" - DRI_DRIVERS="" - GALLIUM_ST="--enable-dri --disable-opencl --enable-xa --enable-nine --enable-xvmc --enable-vdpau --enable-va --enable-omx --enable-gallium-osmesa" # We need swrast for osmesa and nine. # i915 most likely doesn't work with most ST. # Regardless - we're doing a quick build test here. - GALLIUM_DRIVERS="i915,swrast" - VULKAN_DRIVERS="" addons: apt: packages: # Nine requires gcc 4.6... which is the one we have right ? - libxvmc-dev # Build locally, for now. #- libvdpau-dev #- libva-dev - libomxil-bellagio-dev # LLVM packaging is broken and misses these dependencies - libedit-dev # Common - xz-utils - x11proto-xf86vidmode-dev - libexpat1-dev - libx11-xcb-dev - libelf-dev - env: - LABEL="make Vulkan" - BUILD=make - MAKEFLAGS="-j4" - MAKE_CHECK_COMMAND="make -C src/gtest check && make -C src/intel check" - LLVM_VERSION=3.9 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}" - DRI_LOADERS="--disable-glx --disable-gbm --disable-egl --with-platforms=x11,wayland" - DRI_DRIVERS="" - GALLIUM_ST="--enable-dri --enable-dri3 --disable-opencl --disable-xa --disable-nine --disable-xvmc --disable-vdpau --disable-va --disable-omx --disable-gallium-osmesa" - GALLIUM_DRIVERS="" - VULKAN_DRIVERS="intel,radeon" addons: apt: sources: - llvm-toolchain-trusty-3.9 packages: # LLVM packaging is broken and misses these dependencies - libedit-dev # From sources above - llvm-3.9-dev # Common - xz-utils - x11proto-xf86vidmode-dev - libexpat1-dev - libx11-xcb-dev - libelf-dev - env: - LABEL="scons" - BUILD=scons - SCONSFLAGS="-j4" # Explicitly disable. - SCONS_TARGET="llvm=0" # Keep it symmetrical to the make build. - SCONS_CHECK_COMMAND="scons llvm=0 check" addons: apt: packages: - scons # Common - xz-utils - x11proto-xf86vidmode-dev - libexpat1-dev - libx11-xcb-dev - libelf-dev - env: - LABEL="scons LLVM" - BUILD=scons - SCONSFLAGS="-j4" - SCONS_TARGET="llvm=1" # Keep it symmetrical to the make build. - SCONS_CHECK_COMMAND="scons llvm=1 check" - LLVM_VERSION=3.3 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}" addons: apt: packages: - scons # LLVM packaging is broken and misses these dependencies - libedit-dev - llvm-3.3-dev # Common - xz-utils - x11proto-xf86vidmode-dev - libexpat1-dev - libx11-xcb-dev - libelf-dev - env: - LABEL="scons SWR" - BUILD=scons - SCONSFLAGS="-j4" - SCONS_TARGET="swr=1" - LLVM_VERSION=3.9 - LLVM_CONFIG="llvm-config-${LLVM_VERSION}" # Keep it symmetrical to the make build. There's no actual SWR, yet. - SCONS_CHECK_COMMAND="true" - OVERRIDE_CC="gcc-4.8" - OVERRIDE_CXX="g++-4.8" addons: apt: sources: - llvm-toolchain-trusty-3.9 packages: - scons # LLVM packaging is broken and misses these dependencies - libedit-dev # From sources above - llvm-3.9-dev # Common - xz-utils - x11proto-xf86vidmode-dev - libexpat1-dev - libx11-xcb-dev - libelf-dev install: - pip install --user mako # Since libdrm gets updated in configure.ac regularly, try to pick up the # latest version from there. - for line in `grep "^LIBDRM.*_REQUIRED=" configure.ac`; do old_ver=`echo $LIBDRM_VERSION | sed 's/libdrm-//'`; new_ver=`echo $line | sed 's/.*REQUIRED=//'`; if `echo "$old_ver,$new_ver" | tr ',' '\n' | sort -Vc 2> /dev/null`; then export LIBDRM_VERSION="libdrm-$new_ver"; fi; done # Install dependencies where we require specific versions (or where # disallowed by Travis CI's package whitelisting). - wget $XORG_RELEASES/util/$XORGMACROS_VERSION.tar.bz2 - tar -jxvf $XORGMACROS_VERSION.tar.bz2 - (cd $XORGMACROS_VERSION && ./configure --prefix=$HOME/prefix && make install) - wget $XORG_RELEASES/proto/$GLPROTO_VERSION.tar.bz2 - tar -jxvf $GLPROTO_VERSION.tar.bz2 - (cd $GLPROTO_VERSION && ./configure --prefix=$HOME/prefix && make install) - wget $XORG_RELEASES/proto/$DRI2PROTO_VERSION.tar.bz2 - tar -jxvf $DRI2PROTO_VERSION.tar.bz2 - (cd $DRI2PROTO_VERSION && ./configure --prefix=$HOME/prefix && make install) - wget $XCB_RELEASES/$XCBPROTO_VERSION.tar.bz2 - tar -jxvf $XCBPROTO_VERSION.tar.bz2 - (cd $XCBPROTO_VERSION && ./configure --prefix=$HOME/prefix && make install) - wget $XCB_RELEASES/$LIBXCB_VERSION.tar.bz2 - tar -jxvf $LIBXCB_VERSION.tar.bz2 - (cd $LIBXCB_VERSION && ./configure --prefix=$HOME/prefix && make install) - wget $XORG_RELEASES/lib/$LIBPCIACCESS_VERSION.tar.bz2 - tar -jxvf $LIBPCIACCESS_VERSION.tar.bz2 - (cd $LIBPCIACCESS_VERSION && ./configure --prefix=$HOME/prefix && make install) - wget http://dri.freedesktop.org/libdrm/$LIBDRM_VERSION.tar.bz2 - tar -jxvf $LIBDRM_VERSION.tar.bz2 - (cd $LIBDRM_VERSION && ./configure --prefix=$HOME/prefix --enable-vc4 --enable-freedreno --enable-etnaviv-experimental-api && make install) - wget $XORG_RELEASES/lib/$LIBXSHMFENCE_VERSION.tar.bz2 - tar -jxvf $LIBXSHMFENCE_VERSION.tar.bz2 - (cd $LIBXSHMFENCE_VERSION && ./configure --prefix=$HOME/prefix && make install) # libtxc-dxtn uses the patented S3 Texture Compression # algorithm. Therefore, we don't want to use this library but it is # still possible through setting the USE_TXC_DXTN variable to yes in # the travis web UI. # # According to Wikipedia, the patent expires on October 2, 2017: # https://en.wikipedia.org/wiki/S3_Texture_Compression#Patent - if test "x$USE_TXC_DXTN" = xyes; then wget https://people.freedesktop.org/~cbrill/libtxc_dxtn/$LIBTXC_DXTN_VERSION.tar.bz2; tar -jxvf $LIBTXC_DXTN_VERSION.tar.bz2; (cd $LIBTXC_DXTN_VERSION && ./configure --prefix=$HOME/prefix && make install); fi - wget http://people.freedesktop.org/~aplattner/vdpau/$LIBVDPAU_VERSION.tar.bz2 - tar -jxvf $LIBVDPAU_VERSION.tar.bz2 - (cd $LIBVDPAU_VERSION && ./configure --prefix=$HOME/prefix && make install) - wget http://www.freedesktop.org/software/vaapi/releases/libva/$LIBVA_VERSION.tar.bz2 - tar -jxvf $LIBVA_VERSION.tar.bz2 - (cd $LIBVA_VERSION && ./configure --prefix=$HOME/prefix --disable-wayland --disable-dummy-driver && make install) - wget $WAYLAND_RELEASES/$LIBWAYLAND_VERSION.tar.xz - tar -axvf $LIBWAYLAND_VERSION.tar.xz - (cd $LIBWAYLAND_VERSION && ./configure --prefix=$HOME/prefix --enable-libraries --without-host-scanner --disable-documentation --disable-dtd-validation && make install) - wget $WAYLAND_RELEASES/$WAYLAND_PROTOCOLS_VERSION.tar.xz - tar -axvf $WAYLAND_PROTOCOLS_VERSION.tar.xz - (cd $WAYLAND_PROTOCOLS_VERSION && ./configure --prefix=$HOME/prefix && make install) # Generate the header since one is missing on the Travis instance - mkdir -p linux - printf "%s\n" \ "#ifndef _LINUX_MEMFD_H" \ "#define _LINUX_MEMFD_H" \ "" \ "#define __NR_memfd_create 319" \ "#define SYS_memfd_create __NR_memfd_create" \ "" \ "#define MFD_CLOEXEC 0x0001U" \ "#define MFD_ALLOW_SEALING 0x0002U" \ "" \ "#endif /* _LINUX_MEMFD_H */" > linux/memfd.h script: - if test "x$BUILD" = xmake; then test -n "$OVERRIDE_CC" && export CC="$OVERRIDE_CC"; test -n "$OVERRIDE_CXX" && export CXX="$OVERRIDE_CXX"; export CC="$CC -isystem`pwd`"; ./autogen.sh --enable-debug $DRI_LOADERS --with-dri-drivers=$DRI_DRIVERS $GALLIUM_ST --with-gallium-drivers=$GALLIUM_DRIVERS --with-vulkan-drivers=$VULKAN_DRIVERS --disable-llvm-shared-libs && make && eval $MAKE_CHECK_COMMAND; fi - if test "x$BUILD" = xscons; then test -n "$OVERRIDE_CC" && export CC="$OVERRIDE_CC"; test -n "$OVERRIDE_CXX" && export CXX="$OVERRIDE_CXX"; scons $SCONS_TARGET && eval $SCONS_CHECK_COMMAND; fi