X-Git-Url: https://git.libre-soc.org/?p=mesa.git;a=blobdiff_plain;f=src%2Fbroadcom%2Fcle%2Fv3d_packet_v33.xml;h=b26966bcfe5f5e5efb082df5ada0846896f999ac;hp=e4b7df002df4a58688cb7612fbba49fd450cbfe8;hb=6c7a2b69f8df5a9c0cb8c8f3b099694bbe1b0b53;hpb=89ac6fa4036da815b5cf4985f438cec73df67480

diff --git a/src/broadcom/cle/v3d_packet_v33.xml b/src/broadcom/cle/v3d_packet_v33.xml
index e4b7df002df..b26966bcfe5 100644
--- a/src/broadcom/cle/v3d_packet_v33.xml
+++ b/src/broadcom/cle/v3d_packet_v33.xml
@@ -92,19 +92,19 @@
     <value name="ANISOTROPIC_16_1" value="15"/>
   </enum>
 
-  <enum name="Border Colour Mode" prefix="V3D_BORDER_COLOUR" min_ver="41">
+  <enum name="Border Color Mode" prefix="V3D_BORDER_COLOR" min_ver="41">
     <value name="0000" value="0"/>
     <value name="0001" value="1"/>
     <value name="1111" value="2"/>
     <value name="Follows" value="7"/>
   </enum>
 
-  <enum name="Wrap Mode" prefix="V3D_WRAP_MODE" min_ver="41">
-      <value name="Wrap mode REPEAT" value="0"/>
-      <value name="Wrap mode CLAMP" value="1"/>
-      <value name="Wrap mode MIRROR" value="2"/>
-      <value name="Wrap mode BORDER" value="3"/>
-      <value name="Wrap mode MIRROR_ONCE" value="4"/>
+  <enum name="Wrap Mode" prefix="V3D_WRAP_MODE">
+      <value name="REPEAT" value="0"/>
+      <value name="CLAMP" value="1"/>
+      <value name="MIRROR" value="2"/>
+      <value name="BORDER" value="3"/>
+      <value name="MIRROR_ONCE" value="4"/>
   </enum>
 
   <enum name="TMU Op" prefix="V3D_TMU_OP" min_ver="41">
@@ -174,6 +174,51 @@
     <value name="int" value="3" min_ver="42"/> <!-- clamp to integer RT's range -->
   </enum>
 
+  <!---
+    CL cache flush commands are not fully documented and subject to a
+    number of hardware issues that make them unreliable. Specifically:
+
+    * The L2T flush command has a 'deferred' bit to ensure the command
+      doesn't execute until all other commands in the CL have completed,
+      which is required to achieve the expected behavior. This bit comes
+      right after the mode field.
+
+    * GFXH-1895: Overlapping write combiner flush requests from different
+      sources are not safe. If two flush requests from different sources
+      overlap, the TMU may send the done signal for the first flush back to
+      the wrong source.
+
+    * GFXH-1888: It is possible for a regular access to sneak past a
+      pending L2T flush. If an L2T flush is requested via L2TCACTL while a
+      CLE-requested flush is in progress, it is possible for a regular
+      access to sneak through in the gap between the CLE flush and the
+      L2TCACTL flush.
+
+    * GFXH-1897: Writing 0 to L2TCACTL clobbers in-progress flush status.
+      Writing 0 to TMUWCF (bit 8) clears the TMUWCF bit, even if a write
+      combiner flush is still in progress. Similarly, writing 0 to L2TFLS
+      (bit 0) clears the L2TFLS bit, even if an L2T flush is still in
+      progress. Writing 0 to L2TFLM (bits 1..2) overwrites the flush mode,
+      even if a flush is not being requested (ie 0 is being written to
+      L2TFLS). If the last flush has not yet made it through the L2T
+      arbiter, this will change the mode of that flush.
+
+    GFXH-1888 and GFXH-1897 are problematic when we don't wait for L2T
+    flushes requested via LATCACTL to complete immediately.
+
+    Because of this, the driver will do all of its flushing via the kernel
+    using L2TCACTL instead of using the CL commands.
+  -->
+  <enum name="L2T Flush Mode" prefix="L2T_FLUSH_MODE">
+    <!-- invalidates all cache lines -->
+    <value name="flush" value="0"/>
+    <!-- Invalidates dirty cachelines without writeback -->
+    <value name="clear" value="1"/>
+    <!-- Writes back dirty cachelines and marks them clean, without
+         invalidating -->
+    <value name="clean" value="2"/>
+  </enum>
+
   <enum name="Output Image Format" prefix="V3D_OUTPUT_IMAGE_FORMAT">
     <!--
 	Formats appear with their channels named from the low bits to
@@ -240,24 +285,47 @@
     <value name="RGBA" value="3"/>
   </enum>
 
+  <enum name="Pack Mode" prefix="V3D_PACK_MODE">
+    <value name="16-way" value="0"/>
+    <value name="8-way" value="1"/>
+    <value name="4-way" value="2"/>
+    <value name="1-way" value="3"/>
+  </enum>
+
+  <enum name="TCS flush mode" prefix="V3D_TCS_FLUSH_MODE">
+    <value name="fully packed" value="0"/>
+    <value name="single patch" value="1"/>
+    <value name="packed complete patches" value="2"/>
+  </enum>
+
+  <enum name="Primitve counters" prefix="V3D_PRIM_COUNTS">
+    <value name="tf_words_buffer0" value="0"/>
+    <value name="tf_words_buffer1" value="1"/>
+    <value name="tf_words_buffer2" value="2"/>
+    <value name="tf_words_buffer3" value="3"/>
+    <value name="written" value="4"/>
+    <value name="tf_written" value="5"/>
+    <value name="tf_overflow" value="6"/>
+  </enum>
+
   <packet code="0" name="Halt"/>
   <packet code="1" name="NOP"/>
   <packet code="4" name="Flush"/>
   <packet code="5" name="Flush All State"/>
   <packet code="6" name="Start Tile Binning"/>
-  <packet code="7" name="Increment Semaphore"/>
-  <packet code="8" name="Wait on Semaphore"/>
-  <packet code="9" name="Wait for previous frame"/>
-  <packet code="10" name="Enable Z-only rendering" cl="R"/>
-  <packet code="11" name="Disable Z-only rendering" cl="R"/>
-  <packet code="12" name="End of Z-only rendering in frame"/>
-  <packet code="13" name="End of rendering"/>
-
-  <packet code="14" name="Wait for transform feedback" cl="B">
+  <packet code="7" shortname="incr_semaphore" name="Increment Semaphore"/>
+  <packet code="8" shortname="wait_semaphore" name="Wait on Semaphore"/>
+  <packet code="9" shortname="wait_prev_frame" name="Wait for previous frame"/>
+  <packet code="10" shortname="enable_z_only" name="Enable Z-only rendering" cl="R"/>
+  <packet code="11" shortname="disable_z_only" name="Disable Z-only rendering" cl="R"/>
+  <packet code="12" shortname="end_z_only" name="End of Z-only rendering in frame"/>
+  <packet code="13" shortname="end_render" name="End of rendering"/>
+
+  <packet code="14" shortname="wait_transform_feedback" name="Wait for transform feedback" cl="B">
     <field name="Block count" size="8" start="0" type="uint"/>
   </packet>
 
-  <packet code="15" name="Branch to auto-chained sub-list">
+  <packet code="15" shortname="branch_sub_autochain" name="Branch to auto-chained sub-list">
     <field name="address" size="32" start="0" type="address"/>
   </packet>
 
@@ -265,69 +333,69 @@
     <field name="address" size="32" start="0" type="address"/>
   </packet>
 
-  <packet code="17" name="Branch to Sub-list">
+  <packet code="17" shortname="branch_sub" name="Branch to Sub-list">
     <field name="address" size="32" start="0" type="address"/>
   </packet>
 
-  <packet code="18" name="Return from sub-list"/>
-  <packet code="19" name="Flush VCD cache"/>
+  <packet code="18" shortname="return" name="Return from sub-list"/>
+  <packet code="19" shortname="clear_vcd_cache" name="Flush VCD cache"/>
 
-  <packet code="20" name="Start Address of Generic Tile List">
+  <packet code="20" shortname="generic_tile_list" name="Start Address of Generic Tile List">
     <field name="start" size="32" start="0" type="address"/>
     <field name="end" size="32" start="32" type="address"/>
   </packet>
 
-  <packet code="21" name="Branch to Implicit Tile List">
+  <packet code="21" shortname="branch_implicit_tile" name="Branch to Implicit Tile List">
     <field name="tile list set number" size="8" start="0" type="uint"/>
   </packet>
 
-  <packet code="22" name="Branch to Explicit Supertile">
+  <packet code="22" shortname="branch_explicit_supertile" name="Branch to Explicit Supertile">
     <field name="Absolute address of explicit supertile render list" size="32" start="24" type="address"/>
     <field name="explicit supertile number" size="8" start="16" type="uint"/>
     <field name="row number" size="8" start="8" type="uint"/>
     <field name="column number" size="8" start="0" type="uint"/>
   </packet>
 
-  <packet code="23" name="Supertile Coordinates">
+  <packet code="23" shortname="supertile_coords" name="Supertile Coordinates">
     <field name="row number in supertiles" size="8" start="8" type="uint"/>
     <field name="column number in supertiles" size="8" start="0" type="uint"/>
   </packet>
 
-  <packet code="24" name="Store Multi-Sample Resolved Tile Color Buffer" cl="R" max_ver="33"/>
+  <packet code="24" shortname="store_subsample" name="Store Multi-Sample Resolved Tile Color Buffer" cl="R" max_ver="33"/>
 
-  <packet code="25" name="Store Multi-Sample Resolved Tile Color Buffer (extended)" cl="R" max_ver="33">
+  <packet code="25" shortname="store_subsample_ex" name="Store Multi-Sample Resolved Tile Color Buffer (extended)" cl="R" max_ver="33">
     <field name="Disable Color Buffer write" size="8" start="8" type="uint"/>
     <field name="Enable Z write" size="1" start="7" type="bool"/>
     <field name="Enable Stencil write" size="1" start="6" type="bool"/>
     <!-- bit 5 unused -->
-    <field name="Disable Colour buffer(s) clear on write" size="1" start="4" type="bool"/>
+    <field name="Disable Color buffer(s) clear on write" size="1" start="4" type="bool"/>
     <field name="Disable Stencil buffer clear on write" size="1" start="3" type="bool"/>
     <field name="Disable Z buffer clear on write" size="1" start="2" type="bool"/>
     <field name="Disable fast opportunistic write out in multisample mode" size="1" start="1" type="bool"/>
     <field name="Last Tile of Frame" size="1" start="0" type="bool"/>
   </packet>
 
-  <packet code="25" name="Clear Tile Buffers" cl="R" min_ver="41">
+  <packet code="25" shortname="clear" name="Clear Tile Buffers" cl="R" min_ver="41">
     <field name="Clear Z/Stencil Buffer" size="1" start="1" type="bool"/>
     <field name="Clear all Render Targets" size="1" start="0" type="bool"/>
   </packet>
 
-  <packet code="26" name="Reload Tile Colour Buffer" cl="R" max_ver="33">
-    <field name="Disable Colour Buffer load" size="8" start="8" type="uint"/>
+  <packet code="26" shortname="load" name="Reload Tile Color Buffer" cl="R" max_ver="33">
+    <field name="Disable Color Buffer load" size="8" start="8" type="uint"/>
     <field name="Enable Z load" size="1" start="7" type="bool"/>
     <field name="Enable Stencil load" size="1" start="6" type="bool"/>
   </packet>
 
-  <packet code="26" name="End of Loads" cl="R" min_ver="41"/>
+  <packet code="26" shortname="end_loads" name="End of Loads" cl="R" min_ver="41"/>
 
-  <packet code="27" name="End of Tile Marker" cl="R"/>
+  <packet code="27" shortname="end_tile" name="End of Tile Marker" cl="R"/>
 
-  <packet code="29" name="Store Tile Buffer General" cl="R" max_ver="33">
+  <packet code="29" shortname="store_general" name="Store Tile Buffer General" cl="R" max_ver="33">
     <field name="Address" size="24" start="24" type="address"/>
     <field name="Padded height of output image in UIF blocks" size="13" start="11" type="uint"/>
     <field name="XOR UIF" size="1" start="10" type="bool"/>
     <field name="Last Tile of Frame" size="1" start="8" type="bool"/>
-    <field name="Disable Colour buffer(s) clear on write" size="1" start="7" type="bool"/>
+    <field name="Disable Color buffer(s) clear on write" size="1" start="7" type="bool"/>
     <field name="Disable Stencil buffer clear on write" size="1" start="6" type="bool"/>
     <field name="Disable Z buffer clear on write" size="1" start="5" type="bool"/>
     <field name="Raw Mode" size="1" start="4" type="bool"/>
@@ -343,7 +411,7 @@
     </field>
   </packet>
 
-  <packet code="29" name="Store Tile Buffer General" cl="R" min_ver="41">
+  <packet code="29" shortname="store" name="Store Tile Buffer General" cl="R" min_ver="41">
     <field name="Address" size="32" start="64" type="address"/>
 
     <!-- used for y flip -->
@@ -376,7 +444,7 @@
     </field>
   </packet>
 
-  <packet code="30" name="Load Tile Buffer General" cl="R" max_ver="33">
+  <packet code="30" shortname="load_general" name="Load Tile Buffer General" cl="R" max_ver="33">
     <field name="Address" size="24" start="24" type="address"/>
     <field name="Padded height of output image in UIF blocks" size="13" start="11" type="uint"/>
     <field name="XOR UIF" size="1" start="10" type="bool"/>
@@ -393,7 +461,7 @@
     </field>
   </packet>
 
-  <packet code="30" name="Load Tile Buffer General" cl="R" min_ver="41">
+  <packet code="30" shortname="load" name="Load Tile Buffer General" cl="R" min_ver="41">
     <field name="Address" size="32" start="64" type="address"/>
 
     <!-- used for y flip -->
@@ -424,9 +492,9 @@
     </field>
   </packet>
 
-  <packet code="31" name="Transform Feedback Flush and Count"/>
+  <packet code="31" shortname="tf_draw_flush_and_count" name="Transform Feedback Flush and Count"/>
 
-  <packet code="32" name="Indexed Primitive List" cl="B" max_ver="33">
+  <packet code="32" name="Indexed Prim List" cl="B" max_ver="33">
     <field name="Minimum index" size="32" start="104" type="uint"/>
     <field name="Enable Primitive Restarts" size="1" start="103" type="bool"/>
     <field name="Maximum index" size="31" start="72" type="uint"/>
@@ -442,7 +510,7 @@
     <field name="mode" size="5" start="0" type="Primitive"/>
   </packet>
 
-  <packet code="32" name="Indexed Primitive List" cl="B" min_ver="41">
+  <packet code="32" name="Indexed Prim List" cl="B" min_ver="41">
     <field name="Index Offset" size="32" start="40" type="uint"/>
 
     <field name="Enable Primitive Restarts" size="1" start="39" type="bool"/>
@@ -457,7 +525,38 @@
     <field name="mode" size="6" start="0" type="Primitive"/>
   </packet>
 
-  <packet code="34" name="Indexed Instanced Primitive List" cl="B" max_ver="33">
+  <packet code="33" name="Indirect Indexed Instanced Prim List" cl="B" max_ver="33">
+    <field name="Stride in Multiples of 4 Bytes" size="8" start="104" type="uint"/>
+    <field name="Address of Indices List" size="32" start="72" type="address"/>
+    <field name="Address" size="32" start="40" type="address"/>
+    <field name="Enable Primitive Restarts" size="1" start="39" type="bool"/>
+    <field name="Number of Draw Indirect Indexed Records" size="31" start="8" type="uint"/>
+
+    <field name="Index type" size="2" start="6" type="uint">
+      <value name="Index type 8-bit" value="0"/>
+      <value name="Index type 16-bit" value="1"/>
+      <value name="Index type 32-bit" value="2"/>
+    </field>
+
+    <field name="mode" size="6" start="0" type="Primitive"/>
+  </packet>
+
+  <packet code="33" name="Indirect Indexed Instanced Prim List" cl="B" min_ver="41">
+    <field name="Stride in Multiples of 4 Bytes" size="8" start="72" type="uint"/>
+    <field name="Address" size="32" start="40" type="address"/>
+    <field name="Enable Primitive Restarts" size="1" start="39" type="bool"/>
+    <field name="Number of Draw Indirect Indexed Records" size="31" start="8" type="uint"/>
+
+    <field name="Index type" size="2" start="6" type="uint">
+      <value name="Index type 8-bit" value="0"/>
+      <value name="Index type 16-bit" value="1"/>
+      <value name="Index type 32-bit" value="2"/>
+    </field>
+
+    <field name="mode" size="6" start="0" type="Primitive"/>
+  </packet>
+
+  <packet code="34" name="Indexed Instanced Prim List" cl="B" max_ver="33">
     <field name="Enable Primitive Restarts" size="1" start="135" type="bool"/>
     <field name="Maximum index" size="31" start="104" type="uint"/>
     <field name="Address of Indices List" size="32" start="72" type="address"/>
@@ -473,7 +572,7 @@
     <field name="mode" size="5" start="0" type="Primitive"/>
   </packet>
 
-  <packet code="34" name="Indexed Instanced Primitive List" cl="B" min_ver="41">
+  <packet code="34" name="Indexed Instanced Prim List" cl="B" min_ver="41">
     <field name="Index Offset" size="32" start="72" type="uint"/>
     <field name="Number of Instances" size="32" start="40" type="uint"/>
     <field name="Enable Primitive Restarts" size="1" start="39" type="bool"/>
@@ -488,14 +587,22 @@
     <field name="mode" size="6" start="0" type="Primitive"/>
   </packet>
 
-  <packet code="36" name="Vertex Array Primitives" cl="B">
+  <packet code="36" name="Vertex Array Prims" cl="B">
     <field name="Index of First Vertex" size="32" start="40" type="uint"/>
     <field name="Length" size="32" start="8" type="uint"/>
 
     <field name="mode" size="8" start="0" type="Primitive"/>
   </packet>
 
-  <packet code="38" name="Vertex Array Instanced Primitives" cl="B">
+  <packet code="37" name="Indirect Vertex Array Instanced Prims" cl="B">
+    <field name="Stride in Multiples of 4 Bytes" size="8" start="72" type="uint"/>
+    <field name="Address" size="32" start="40" type="address"/>
+    <field name="Number of Draw Indirect Array Records" size="32" start="8" type="uint"/>
+
+    <field name="mode" size="8" start="0" type="Primitive"/>
+  </packet>
+
+  <packet code="38" name="Vertex Array Instanced Prims" cl="B">
     <field name="Index of First Vertex" size="32" start="72" type="uint"/>
     <field name="Number of Instances" size="32" start="40" type="uint"/>
     <field name="Instance Length" size="32" start="8" type="uint"/>
@@ -503,6 +610,14 @@
     <field name="mode" size="8" start="0" type="Primitive"/>
   </packet>
 
+  <packet code="39" name="Vertex Array Single Instance Prims" cl="B">
+    <field name="Index of First Vertex" size="32" start="72" type="uint"/>
+    <field name="Instance ID" size="32" start="40" type="uint"/>
+    <field name="Instance Length" size="32" start="8" type="uint"/>
+
+    <field name="mode" size="8" start="0" type="Primitive"/>
+  </packet>
+
   <packet code="43" name="Base Vertex Base Instance" cl="B">
     <field name="Base Instance" size="32" start="32" type="uint"/>
 
@@ -514,7 +629,15 @@
     <field name="Size" size="32" start="32" type="uint"/>
   </packet>
 
-  <packet code="56" name="Primitive List Format">
+  <packet code="54" name="Set InstanceID" cl="B" min_ver="41">
+    <field name="Instance ID" size="32" start="32" type="uint"/>
+  </packet>
+
+  <packet code="55" name="Set PrimitiveID" cl="B" min_ver="41">
+    <field name="Primitive ID" size="32" start="32" type="uint"/>
+  </packet>
+
+  <packet code="56" name="Prim List Format">
     <field name="tri strip or fan" size="1" start="7" type="bool"/>
     <field name="primitive type" size="6" start="0" type="uint">
       <value name="List Points" value="0"/>
@@ -523,11 +646,69 @@
     </field>
   </packet>
 
-  <packet code="64" name="GL Shader State">
+  <packet code="57" name="Serial Number List Start">
+    <field name="address" size="26" start="6" type="address"/>
+    <field name="block size" size="2" start="0" type="uint">
+      <value name="block size 64b" value="0"/>
+      <value name="block size 128b" value="1"/>
+      <value name="block size 256b" value="2"/>
+    </field>
+  </packet>
+
+  <packet code="64" shortname="gl_shader" name="GL Shader State">
+    <field name="address" size="27" start="5" type="address"/>
+    <field name="number of attribute arrays" size="5" start="0" type="uint"/>
+  </packet>
+
+  <packet code="65" shortname="gl_t_shader" name="GL Shader State including TS" min_ver="41">
     <field name="address" size="27" start="5" type="address"/>
     <field name="number of attribute arrays" size="5" start="0" type="uint"/>
   </packet>
 
+  <packet code="66" shortname="gl_g_shader" name="GL Shader State including GS" min_ver="41">
+    <field name="address" size="27" start="5" type="address"/>
+    <field name="number of attribute arrays" size="5" start="0" type="uint"/>
+  </packet>
+
+  <packet code="67" shortname="gl_tg_shader" name="GL Shader State including TS/GS" min_ver="41">
+    <field name="address" size="27" start="5" type="address"/>
+    <field name="number of attribute arrays" size="5" start="0" type="uint"/>
+  </packet>
+
+  <packet code="71" name="VCM Cache Size" min_ver="41">
+    <field name="Number of 16-vertex batches for rendering" size="4" start="4" type="uint"/>
+    <field name="Number of 16-vertex batches for binning" size="4" start="0" type="uint"/>
+  </packet>
+
+  <packet code="72" shortname="prim_counts_feedback" name="Primitive Counts Feedback">
+    <field name="address" size="27" start="5" type="address"/>
+    <field name="read/write 64byte" size="1" start="4" type="bool"/>
+    <field name="op" size="4" start="0" type="uint">
+      <!--
+	  dword 0-3 are words written to TFB 0-3.  4 is prims generated, 5 is prims written, 6 is
+	  prims overflowed
+      -->
+      <value name="store primitive counts" value="0"/>
+      <value name="store primitive counts and zero" value="1"/>
+      <!--
+	  write 4 pairs of TFB state: remaining TFB space in buffer n, current address in buffer n
+      -->
+      <value name="store buffer state" value="2"/>
+      <value name="store buffer state CL" value="3"/>
+      <!--
+	  Waits for buffer state stores to complete, then loads from
+	  the given buffer state.  This op can be offset by n to skip
+	  waiting for the last n.
+      -->
+      <value name="load buffer state" value="8"/>
+    </field>
+  </packet>
+
+  <packet code="73" name="VCM Cache Size" max_ver="33">
+    <field name="Number of 16-vertex batches for rendering" size="4" start="4" type="uint"/>
+    <field name="Number of 16-vertex batches for binning" size="4" start="0" type="uint"/>
+  </packet>
+
   <packet code="73" name="Transform Feedback Buffer" min_ver="41">
     <field name="Buffer Address" size="32" start="32" type="address"/>
     <field name="Buffer Size in 32-bit words" size="30" start="2" type="uint"/>
@@ -546,6 +727,19 @@
 
   <packet code="75" name="Flush Transform Feedback Data"/>
 
+  <packet code="76" name="L1 Cache Flush Control">
+    <field name="TMU Config Cache Clear" size="4" start="12" type="uint"/>
+    <field name="TMU Data Cache Clear" size="4" start="8" type="uint"/>
+    <field name="Uniforms Cache Clear" size="4" start="4" type="uint"/>
+    <field name="Instruction Cache Clear" size="4" start="0" type="uint"/>
+  </packet>
+
+  <packet code="77" name="L2T Cache Flush Control">
+    <field name="L2T Flush Mode" size="4" start="64" type="L2T Flush Mode"/>
+    <field name="L2T Flush End" size="32" start="32" type="address"/>
+    <field name="L2T Flush Start" size="32" start="0" type="address"/>
+  </packet>
+
   <struct name="Transform Feedback Output Data Spec" max_ver="33">
     <field name="First Shaded Vertex Value to output" size="8" start="0" type="uint"/>
     <field name="Number of consecutive Vertex Values to output as 32-bit values" size="4" start="8" type="uint" minus_one="true"/>
@@ -563,7 +757,7 @@
     <field name="address" size="32" start="0" type="address"/>
   </struct>
 
-  <packet code="80" name="Stencil Config">
+  <packet code="80" name="Stencil Cfg">
     <field name="Stencil Write Mask" size="8" start="32" type="uint"/>
     <field name="Back Config" size="1" start="29" type="bool"/>
     <field name="Front Config" size="1" start="28" type="bool"/>
@@ -579,33 +773,33 @@
     <field name="Mask" size="8" start="0" type="uint"/>
   </packet>
 
-  <packet code="84" name="Blend Config" max_ver="33">
-    <field name="Colour blend dst factor" size="4" start="20" type="Blend Factor"/>
-    <field name="Colour blend src factor" size="4" start="16" type="Blend Factor"/>
-    <field name="Colour blend mode" size="4" start="12" type="Blend Mode"/>
+  <packet code="84" name="Blend Cfg" max_ver="33">
+    <field name="Color blend dst factor" size="4" start="20" type="Blend Factor"/>
+    <field name="Color blend src factor" size="4" start="16" type="Blend Factor"/>
+    <field name="Color blend mode" size="4" start="12" type="Blend Mode"/>
     <field name="Alpha blend dst factor" size="4" start="8" type="Blend Factor"/>
     <field name="Alpha blend src factor" size="4" start="4" type="Blend Factor"/>
     <field name="Alpha blend mode" size="4" start="0" type="Blend Mode"/>
   </packet>
 
-  <packet code="84" name="Blend Config" min_ver="41">
+  <packet code="84" name="Blend Cfg" min_ver="41">
     <field name="Render Target Mask" size="4" start="24" type="uint"/>
-    <field name="Colour blend dst factor" size="4" start="20" type="Blend Factor"/>
-    <field name="Colour blend src factor" size="4" start="16" type="Blend Factor"/>
-    <field name="Colour blend mode" size="4" start="12" type="Blend Mode"/>
+    <field name="Color blend dst factor" size="4" start="20" type="Blend Factor"/>
+    <field name="Color blend src factor" size="4" start="16" type="Blend Factor"/>
+    <field name="Color blend mode" size="4" start="12" type="Blend Mode"/>
     <field name="Alpha blend dst factor" size="4" start="8" type="Blend Factor"/>
     <field name="Alpha blend src factor" size="4" start="4" type="Blend Factor"/>
     <field name="Alpha blend mode" size="4" start="0" type="Blend Mode"/>
   </packet>
 
-  <packet code="86" name="Blend Constant Colour">
+  <packet code="86" shortname="blend_ccolor" name="Blend Constant Color">
     <field name="Alpha (F16)" size="16" start="48" type="uint"/>
     <field name="Blue (F16)" size="16" start="32" type="uint"/>
     <field name="Green (F16)" size="16" start="16" type="uint"/>
     <field name="Red (F16)" size="16" start="0" type="uint"/>
   </packet>
 
-  <packet code="87" name="Colour Write Masks">
+  <packet code="87" shortname="color_wmasks" name="Color Write Masks">
     <field name="Mask" size="32" start="0" type="uint"/>
   </packet>
 
@@ -623,11 +817,11 @@
     <field name="Mask" size="4" start="0" type="uint"/>
   </packet>
 
-  <packet code="92" name="Occlusion Query Counter">
+  <packet code="92" shortname="occlusion_query_counter_enable" name="Occlusion Query Counter">
     <field name="address" size="32" start="0" type="address"/>
   </packet>
 
-  <packet code="96" name="Configuration Bits">
+  <packet code="96" name="Cfg Bits">
     <field name="Direct3D Provoking Vertex" size="1" start="21" type="bool"/>
     <field name="Direct3D 'Point-fill' mode" size="1" start="20" type="bool"/>
     <field name="Blend enable" size="1" start="19" type="bool"/>
@@ -645,18 +839,18 @@
     <field name="Enable Forward Facing Primitive" size="1" start="0" type="bool"/>
   </packet>
 
-  <packet code="97" name="Zero All Flat Shade Flags"/>
+  <packet code="97" shortname="zero_all_flatshade_flags" name="Zero All Flat Shade Flags"/>
 
-  <packet code="98" name="Flat Shade Flags">
+  <packet code="98" shortname="flatshade_flags" name="Flat Shade Flags">
     <field name="Flat Shade Flags for varyings V0*24" size="24" start="8" type="uint"/>
     <field name="Action for Flat Shade Flags of higher numbered varyings" size="2" start="6" type="Varying Flags Action"/>
     <field name="Action for Flat Shade Flags of lower numbered varyings" size="2" start="4" type="Varying Flags Action"/>
     <field name="Varying offset V0" size="4" start="0" type="uint"/>
   </packet>
 
-  <packet code="99" name="Zero All Non-perspective Flags" min_ver="41"/>
+  <packet code="99" shortname="zero_all_noperspective_flags" name="Zero All Non-perspective Flags" min_ver="41"/>
 
-  <packet code="100" name="Non-perspective Flags" min_ver="41">
+  <packet code="100" shortname="noperspective_flags" name="Non-perspective Flags" min_ver="41">
     <field name="Non-perspective Flags for varyings V0*24" size="24" start="8" type="uint"/>
     <field name="Action for Non-perspective Flags of higher numbered varyings" size="2" start="6" type="Varying Flags Action"/>
     <field name="Action for Non-perspective Flags of lower numbered varyings" size="2" start="4" type="Varying Flags Action"/>
@@ -682,7 +876,7 @@
     <field name="Depth Offset Factor" size="16" start="0" type="f187"/>
   </packet>
 
-  <packet name="Clip Window" code="107">
+  <packet shortname="clip" name="clip_window" code="107">
     <field name="Clip Window Height in pixels" size="16" start="48" type="uint"/>
     <field name="Clip Window Width in pixels" size="16" start="32" type="uint"/>
     <field name="Clip Window Bottom Pixel Coordinate" size="16" start="16" type="uint"/>
@@ -701,17 +895,17 @@
     <field name="Viewport Centre X-coordinate" size="22" start="0" type="s14.8"/>
   </packet>
 
-  <packet name="Clipper Z min/max clipping planes" code="109">
+  <packet shortname="clipz" name="Clipper Z min/max clipping planes" code="109">
     <field name="Maximum Zw" size="32" start="32" type="float"/>
     <field name="Minimum Zw" size="32" start="0" type="float"/>
   </packet>
 
-  <packet name="Clipper XY Scaling" code="110" cl="B">
+  <packet shortname="clipper_xy" name="Clipper XY Scaling" code="110" cl="B">
     <field name="Viewport Half-Height in 1/256th of pixel" size="32" start="32" type="float"/>
     <field name="Viewport Half-Width in 1/256th of pixel" size="32" start="0" type="float"/>
   </packet>
 
-  <packet name="Clipper Z Scale and Offset" code="111" cl="B">
+  <packet shortname="clipper_z" name="Clipper Z Scale and Offset" code="111" cl="B">
     <field name="Viewport Z Offset (Zc to Zs)" size="32" start="32" type="float"/>
     <field name="Viewport Z Scale (Zc to Zs)" size="32" start="0" type="float"/>
   </packet>
@@ -720,7 +914,7 @@
     <field name="Number of Layers" size="8" start="0" type="uint" minus_one="true"/>
   </packet>
 
-  <packet code="120" name="Tile Binning Mode Configuration (Part1)" max_ver="33">
+  <packet code="120" name="Tile Binning Mode Cfg (Part1)" max_ver="33">
     <field name="Double-buffer in non-ms mode" size="1" start="63" type="bool"/>
     <field name="Multisample Mode (4x)" size="1" start="62" type="bool"/>
 
@@ -746,10 +940,10 @@
     <field name="sub-id" size="1" start="0" type="uint" default="0"/>
   </packet>
 
-  <packet code="120" name="Tile Binning Mode Configuration (Part1)" min_ver="41">
+  <packet code="120" name="Tile Binning Mode Cfg" min_ver="41">
 
-    <field name="Height (in pixels)" size="12" start="48" type="uint" minus_one="true"/>
-    <field name="Width (in pixels)" size="12" start="32" type="uint" minus_one="true"/>
+    <field name="Height (in pixels)" size="16" start="48" type="uint" minus_one="true"/>
+    <field name="Width (in pixels)" size="16" start="32" type="uint" minus_one="true"/>
 
     <field name="Double-buffer in non-ms mode" size="1" start="15" type="bool"/>
     <field name="Multisample Mode (4x)" size="1" start="14" type="bool"/>
@@ -774,14 +968,14 @@
     </field>
   </packet>
 
-  <packet code="120" name="Tile Binning Mode Configuration (Part2)" cl="B" max_ver="33">
+  <packet code="120" name="Tile Binning Mode Cfg (Part2)" cl="B" max_ver="33">
     <field name="Tile Allocation Memory Address" size="32" start="32" type="address"/>
     <field name="Tile Allocation Memory Size" size="32" start="0" type="uint"/>
 
     <field name="sub-id" size="1" start="0" type="uint" default="1"/>
   </packet>
 
-  <packet code="121" name="Tile Rendering Mode Configuration (Common Configuration)" cl="R" max_ver="33">
+  <packet code="121" name="Tile Rendering Mode Cfg (Common)" cl="R" max_ver="33">
     <field name="Disable Render Target Stores" size="8" start="56" type="uint"/>
     <field name="Enable Z Store" size="1" start="55" type="bool"/>
     <field name="Enable Stencil Store" size="1" start="54" type="bool"/>
@@ -809,7 +1003,7 @@
     <field name="sub-id" size="4" start="0" type="uint" default="0"/>
   </packet>
 
-  <packet code="121" name="Tile Rendering Mode Configuration (Common Configuration)" cl="R" min_ver="41">
+  <packet code="121" name="Tile Rendering Mode Cfg (Common)" cl="R" min_ver="41">
     <field name="Pad" size="12" start="52" type="uint"/>
 
     <field name="Early Depth/Stencil Clear" size="1" start="51" type="bool"/>
@@ -834,7 +1028,7 @@
     <field name="sub-id" size="4" start="0" type="uint" default="0"/>
   </packet>
 
-  <packet code="121" name="Tile Rendering Mode Configuration (Render Target config)" cl="R" max_ver="33">
+  <packet code="121" name="Tile Rendering Mode Cfg (Color)" cl="R" max_ver="33">
     <field name="Address" size="32" start="32" type="address"/>
 
     <field name="Pad" size="4" start="28" type="uint"/>
@@ -855,7 +1049,7 @@
     <field name="sub-id" size="4" start="0" type="uint" default="2"/>
   </packet>
 
-  <packet code="121" name="Tile Rendering Mode Configuration (Render Target config)" cl="R" min_ver="41">
+  <packet code="121" name="Tile Rendering Mode Cfg (Color)" cl="R" min_ver="41">
 
     <field name="Pad" size="28" start="34" type="uint"/>
 
@@ -878,7 +1072,7 @@
     <field name="sub-id" size="4" start="0" type="uint" default="1"/>
   </packet>
 
-  <packet code="121" name="Tile Rendering Mode Configuration (Z/Stencil config)" cl="R" max_ver="33">
+  <packet code="121" name="Tile Rendering Mode Cfg (Z/Stencil)" cl="R" max_ver="33">
     <field name="Address" size="26" start="38" type="address"/>
 
     <field name="Padded height of output image in UIF blocks" size="13" start="25" type="uint"/>
@@ -897,7 +1091,7 @@
     <field name="sub-id" size="4" start="0" type="uint" default="1"/>
   </packet>
 
-  <packet code="121" name="Tile Rendering Mode Configuration (Z Stencil Clear Values)" cl="R" max_ver="33">
+  <packet code="121" name="Tile Rendering Mode Cfg (ZS Clear Values)" cl="R" max_ver="33">
     <field name="unused" size="16" start="48" type="uint"/>
 
     <field name="Z Clear Value" size="32" start="16" type="float"/>
@@ -906,7 +1100,7 @@
     <field name="sub-id" size="4" start="0" type="uint" default="3"/>
   </packet>
 
-  <packet code="121" name="Tile Rendering Mode Configuration (Z Stencil Clear Values)" cl="R" min_ver="41">
+  <packet code="121" name="Tile Rendering Mode Cfg (ZS Clear Values)" cl="R" min_ver="41">
     <field name="unused" size="16" start="48" type="uint"/>
 
     <field name="Z Clear Value" size="32" start="16" type="float"/>
@@ -915,7 +1109,7 @@
     <field name="sub-id" size="4" start="0" type="uint" default="2"/>
   </packet>
 
-  <packet code="121" name="Tile Rendering Mode Configuration (Clear Colors Part1)" cl="R" max_ver="33">
+  <packet code="121" name="Tile Rendering Mode Cfg (Clear Colors Part1)" cl="R" max_ver="33">
     <!-- Express this as a 56-bit field? -->
     <field name="Clear Color next 24 bits" size="24" start="40" type="uint"/>
     <field name="Clear Color low 32 bits" size="32" start="8" type="uint"/>
@@ -924,7 +1118,7 @@
     <field name="sub-id" size="4" start="0" type="uint" default="4"/>
   </packet>
 
-  <packet code="121" name="Tile Rendering Mode Configuration (Clear Colors Part1)" cl="R" min_ver="41">
+  <packet code="121" name="Tile Rendering Mode Cfg (Clear Colors Part1)" cl="R" min_ver="41">
     <!-- Express this as a 56-bit field? -->
     <field name="Clear Color next 24 bits" size="24" start="40" type="uint"/>
     <field name="Clear Color low 32 bits" size="32" start="8" type="uint"/>
@@ -933,7 +1127,7 @@
     <field name="sub-id" size="4" start="0" type="uint" default="3"/>
   </packet>
 
-  <packet code="121" name="Tile Rendering Mode Configuration (Clear Colors Part2)" cl="R" max_ver="33">
+  <packet code="121" name="Tile Rendering Mode Cfg (Clear Colors Part2)" cl="R" max_ver="33">
     <!-- Express this as a 56-bit field? -->
     <field name="Clear Color mid-high 24 bits" size="24" start="40" type="uint"/>
     <field name="Clear Color mid-low 32 bits" size="32" start="8" type="uint"/>
@@ -942,7 +1136,7 @@
     <field name="sub-id" size="4" start="0" type="uint" default="5"/>
   </packet>
 
-  <packet code="121" name="Tile Rendering Mode Configuration (Clear Colors Part2)" cl="R" min_ver="41">
+  <packet code="121" name="Tile Rendering Mode Cfg (Clear Colors Part2)" cl="R" min_ver="41">
     <!-- Express this as a 56-bit field? -->
     <field name="Clear Color mid-high 24 bits" size="24" start="40" type="uint"/>
     <field name="Clear Color mid-low 32 bits" size="32" start="8" type="uint"/>
@@ -951,7 +1145,7 @@
     <field name="sub-id" size="4" start="0" type="uint" default="4"/>
   </packet>
 
-  <packet code="121" name="Tile Rendering Mode Configuration (Clear Colors Part3)" cl="R" max_ver="33">
+  <packet code="121" name="Tile Rendering Mode Cfg (Clear Colors Part3)" cl="R" max_ver="33">
     <field name="pad" size="11" start="53" type="uint"/>
     <field name="UIF padded height in UIF blocks" size="13" start="40" type="uint"/>
     <!-- image height is for Y flipping -->
@@ -962,7 +1156,7 @@
     <field name="sub-id" size="4" start="0" type="uint" default="6"/>
   </packet>
 
-  <packet code="121" name="Tile Rendering Mode Configuration (Clear Colors Part3)" cl="R" min_ver="41">
+  <packet code="121" name="Tile Rendering Mode Cfg (Clear Colors Part3)" cl="R" min_ver="41">
     <field name="pad" size="11" start="53" type="uint"/>
     <field name="UIF padded height in UIF blocks" size="13" start="40" type="uint"/>
     <!-- image height is for Y flipping -->
@@ -973,12 +1167,12 @@
     <field name="sub-id" size="4" start="0" type="uint" default="5"/>
   </packet>
 
-  <packet code="124" name="Tile Coordinates">
+  <packet code="124" shortname="tile_coords" name="Tile Coordinates">
     <field name="tile row number" size="12" start="12" type="uint"/>
     <field name="tile column number" size="12" start="0" type="uint"/>
   </packet>
 
-  <packet code="122" name="Multicore Rendering Supertile Configuration" cl="R">
+  <packet code="122" name="Multicore Rendering Supertile Cfg" cl="R">
     <field name="Number of Bin Tile Lists" size="3" start="61" type="uint" minus_one="true"/>
     <field name="Supertile Raster Order" size="1" start="60" type="bool"/>
     <field name="Multicore Enable" size="1" start="56" type="bool"/>
@@ -993,13 +1187,13 @@
     <field name="Supertile Width in Tiles" size="8" start="0" type="uint" minus_one="true"/>
   </packet>
 
-  <packet code="123" name="Multicore Rendering Tile List Set Base" cl="R">
+  <packet code="123" shortname="multicore_rendering_tile_list_base" name="Multicore Rendering Tile List Set Base" cl="R">
     <field name="address" size="26" start="6" type="address"/>
     <field name="Tile List Set Number" size="4" start="0" type="uint"/>
   </packet>
 
   <!-- add fields -->
-  <packet code="125" name="Tile Coordinates Implicit"/>
+  <packet code="125" shortname="implicit_tile_coords" name="Tile Coordinates Implicit"/>
 
   <packet code="126" name="Tile List Initial Block Size">
     <field name="Use auto-chained tile lists" size="1" start="2" type="bool"/>
@@ -1107,27 +1301,102 @@
   </struct>
 
   <struct name="Geometry Shader State Record" min_ver="41">
-    <field name="Geometry Bin Mode Shader Code Address" size="32" start="0b" type="address"/>
-    <field name="4-way threadable" size="1" start="0" type="bool"/>
-    <field name="Start in final thread section" size="1" start="1" type="bool"/>
-    <field name="Propagate NaNs" size="1" start="2" type="bool"/>
+    <field name="Geometry Bin Mode Shader Code Address" size="29" start="3" type="address"/>
+    <field name="Geometry Bin Mode Shader 4-way threadable" size="1" start="0" type="bool"/>
+    <field name="Geometry Bin Mode Shader Start in final thread section" size="1" start="1" type="bool"/>
+    <field name="Geometry Bin Mode Shader Propagate NaNs" size="1" start="2" type="bool"/>
     <field name="Geometry Bin Mode Shader Uniforms Address" size="32" start="4b" type="address"/>
-    <field name="Geometry Render Mode Shader Code Address" size="32" start="8b" type="address"/>
+    <field name="Geometry Render Mode Shader Code Address" size="29" start="67" type="address"/>
+    <field name="Geometry Render Mode Shader 4-way threadable" size="1" start="64" type="bool"/>
+    <field name="Geometry Render Mode Shader Start in final thread section" size="1" start="65" type="bool"/>
+    <field name="Geometry Render Mode Shader Propagate NaNs" size="1" start="66" type="bool"/>
     <field name="Geometry Render Mode Shader Uniforms Address" size="32" start="12b" type="address"/>
   </struct>
 
   <struct name="Tessellation Shader State Record" min_ver="41">
-    <field name="Tessellation Bin Mode Control Shader Code Address" size="32" start="0b" type="address"/>
+    <field name="Tessellation Bin Mode Control Shader Code Address" size="29" start="3" type="address"/>
+    <field name="Tessellation Bin Mode Control Shader 4-way threadable" size="1" start="0" type="bool"/>
+    <field name="Tessellation Bin Mode Control Shader Start in final thread section" size="1" start="1" type="bool"/>
+    <field name="Tessellation Bin Mode Control Shader Propagate NaNs" size="1" start="2" type="bool"/>
     <field name="Tessellation Bin Mode Control Shader Uniforms Address" size="32" start="4b" type="address"/>
-    <field name="Tessellation Render Mode Control Shader Code Address" size="32" start="8b" type="address"/>
+    <field name="Tessellation Render Mode Control Shader Code Address" size="29" start="67" type="address"/>
+    <field name="Tessellation Render Mode Control Shader 4-way threadable" size="1" start="64" type="bool"/>
+    <field name="Tessellation Render Mode Control Shader Start in final thread section" size="1" start="65" type="bool"/>
+    <field name="Tessellation Render Mode Control Shader Propagate NaNs" size="1" start="66" type="bool"/>
     <field name="Tessellation Render Mode Control Shader Uniforms Address" size="32" start="12b" type="address"/>
 
-    <field name="Tessellation Bin Mode Evaluation Shader Code Address" size="32" start="16b" type="address"/>
+    <field name="Tessellation Bin Mode Evaluation Shader Code Address" size="29" start="131" type="address"/>
+    <field name="Tessellation Bin Mode Evaluation Shader 4-way threadable" size="1" start="128" type="bool"/>
+    <field name="Tessellation Bin Mode Evaluation Shader Start in final thread section" size="1" start="129" type="bool"/>
+    <field name="Tessellation Bin Mode Evaluation Shader Propagate NaNs" size="1" start="130" type="bool"/>
     <field name="Tessellation Bin Mode Evaluation Shader Uniforms Address" size="32" start="20b" type="address"/>
-    <field name="Tessellation Render Mode Evaluation Shader Code Address" size="32" start="24b" type="address"/>
+    <field name="Tessellation Render Mode Evaluation Shader Code Address" size="29" start="195" type="address"/>
+    <field name="Tessellation Render Mode Evaluation Shader 4-way threadable" size="1" start="192" type="bool"/>
+    <field name="Tessellation Render Mode Evaluation Shader Start in final thread section" size="1" start="193" type="bool"/>
+    <field name="Tessellation Render Mode Evaluation Shader Propagate NaNs" size="1" start="194" type="bool"/>
     <field name="Tessellation Render Mode Evaluation Shader Uniforms Address" size="32" start="28b" type="address"/>
   </struct>
 
+  <struct name="Tessellation/Geometry Common Params" min_ver="41">
+    <field name="Tessellation Type" size="2" start="1" type="uint">
+      <value name="Tessellation Type Triangle" value="0"/>
+      <value name="Tessellation Type Quads" value="1"/>
+      <value name="Tessellation Type Isolines" value="2"/>
+    </field>
+
+    <field name="Tessellation point mode" size="1" start="3" type="bool"/>
+
+    <field name="Tessellation Edge Spacing" size="2" start="4" type="uint">
+      <value name="Tessellation Edge Spacing Even" value="0"/>
+      <value name="Tessellation Edge Spacing Fractional Even" value="1"/>
+      <value name="Tessellation Edge Spacing Fractional Odd" value="2"/>
+    </field>
+
+    <field name="Tessellation clockwise" size="1" start="6" type="bool"/>
+
+    <field name="Tessellation Invocations" size="5" start="12" type="uint"/> <!-- 0 == 32 -->
+
+    <field name="Geometry Shader output format" size="2" start="17" type="uint">
+      <value name="Geometry Shader Points" value="0"/>
+      <value name="Geometry Shader Line Strip" value="1"/>
+      <value name="Geometry Shader Tri Strip" value="2"/>
+    </field>
+
+    <field name="Geometry Shader Instances" size="5" start="19" type="uint"/> <!-- 0 == 32 -->
+
+     <!-- This field should not be filled, but we need it in the struct description so
+          we don't compute an incorrect packet size, since it uses an full byte.
+      -->
+    <field name="Reserved" size="8" start="24" type="uint"/>
+
+    <!-- followed by "Tessellation/Geometry Shader Params" for bin, then render -->
+  </struct>
+
+  <struct name="Tessellation/Geometry Shader Params">
+    <field name="TCS Batch Flush Mode" size="2" start="0" type="TCS flush mode"/>
+    <field name="Per-patch data column depth" size="4" start="2" type="uint"/> <!-- 8-dword units, 0==16 -->
+
+    <field name="TCS output segment size in sectors" size="6" start="8" type="uint"/>
+    <field name="TCS output segment pack mode" size="2" start="14" type="Pack Mode"/>
+
+    <field name="TES output segment size in sectors" size="6" start="16" type="uint"/>
+    <field name="TES output segment pack mode" size="2" start="22" type="Pack Mode"/>
+
+    <field name="GS output segment size in sectors" size="6" start="24" type="uint"/>
+    <field name="GS output segment pack mode" size="2" start="30" type="Pack Mode"/>
+
+    <field name="TBG max patches per TCS batch" size="4" start="32" type="uint" minus_one="true"/>
+    <field name="TBG max extra vertex segs for patches after first" size="2" start="36" type="uint"/>
+    <field name="TBG min TCS output segments required in play" size="2" start="38" type="uint" minus_one="true"/>
+    <field name="TBG min per-patch data segments required in play" size="3" start="40" type="uint" minus_one="true"/>
+    <field name="TPG max patches per TES batch" size="4" start="45" type="uint" minus_one="true"/>
+    <field name="TPG max vertex segments per TES batch" size="2" start="49" type="uint"/>
+    <field name="TPG max TCS output segments per TES batch" size="3" start="51" type="uint" minus_one="true"/>
+    <field name="TPG min TES output segments required in play" size="3" start="54" type="uint" minus_one="true"/>
+    <field name="GBG max TES output/vertex segments per GS batch" size="2" start="57" type="uint"/>
+    <field name="GBG min GS output segments required in play" size="3" start="59" type="uint" minus_one="true"/>
+  </struct>
+
   <struct name="GL Shader State Attribute Record" max_ver="33">
     <field name="Address" size="32" start="0" type="address"/>
 
@@ -1220,29 +1489,9 @@
     <field name="Texel offset for t coordinate" size="4" start="23" type="int"/>
     <field name="Texel offset for s coordinate" size="4" start="19" type="int"/>
 
-    <field name="R Wrap Mode" size="3" start="16" type="uint">
-      <value name="Wrap mode REPEAT" value="0"/>
-      <value name="Wrap mode CLAMP" value="1"/>
-      <value name="Wrap mode MIRROR" value="2"/>
-      <value name="Wrap mode BORDER" value="3"/>
-      <value name="Wrap mode MIRROR_ONCE" value="4"/>
-    </field>
-
-    <field name="T Wrap Mode" size="3" start="13" type="uint">
-      <value name="Wrap mode REPEAT" value="0"/>
-      <value name="Wrap mode CLAMP" value="1"/>
-      <value name="Wrap mode MIRROR" value="2"/>
-      <value name="Wrap mode BORDER" value="3"/>
-      <value name="Wrap mode MIRROR_ONCE" value="4"/>
-    </field>
-
-    <field name="S Wrap Mode" size="3" start="10" type="uint">
-      <value name="Wrap mode REPEAT" value="0"/>
-      <value name="Wrap mode CLAMP" value="1"/>
-      <value name="Wrap mode MIRROR" value="2"/>
-      <value name="Wrap mode BORDER" value="3"/>
-      <value name="Wrap mode MIRROR_ONCE" value="4"/>
-    </field>
+    <field name="R Wrap Mode" size="3" start="16" type="Wrap Mode"/>
+    <field name="T Wrap Mode" size="3" start="13" type="Wrap Mode"/>
+    <field name="S Wrap Mode" size="3" start="10" type="Wrap Mode"/>
 
     <field name="New configuration mode" size="1" start="9" type="bool" default="1"/>
 
@@ -1396,7 +1645,7 @@
 
     <field name="Texture base pointer" size="32" start="0" type="address"/>
 
-    <field name="Reverse Standard Border Colour" size="1" start="5" type="bool"/>
+    <field name="Reverse Standard Border Color" size="1" start="5" type="bool"/>
     <field name="AHDR" size="1" start="4" type="bool"/>
     <field name="sRGB" size="1" start="3" type="bool"/>
     <field name="Flip S and T on incoming request" size="1" start="2" type="bool"/>
@@ -1405,13 +1654,13 @@
   </struct>
 
   <struct name="Sampler State" min_ver="41">
-    <field name="Border colour Alpha" size="32" start="160" type="uint"/>
-    <field name="Border colour Blue" size="32" start="128" type="uint"/>
-    <field name="Border colour Green" size="32" start="96" type="uint"/>
-    <field name="Border colour Red" size="32" start="64" type="uint"/>
+    <field name="Border color word 3" size="32" start="160" type="uint"/>
+    <field name="Border color word 2" size="32" start="128" type="uint"/>
+    <field name="Border color word 1" size="32" start="96" type="uint"/>
+    <field name="Border color word 0" size="32" start="64" type="uint"/>
 
     <field name="Maximum Anisotropy" size="2" start="61" type="uint"/>
-    <field name="Border Colour Mode" size="3" start="58" type="Border Colour Mode"/>
+    <field name="Border Color Mode" size="3" start="58" type="Border Color Mode"/>
     <field name="Wrap I Border" size="1" start="57" type="bool"/>
     <field name="Wrap R" size="3" start="54" type="Wrap Mode"/>
     <field name="Wrap T" size="3" start="51" type="Wrap Mode"/>