add sv sraw elwidth unit test

diff --git a/isa/rv64ui/Makefrag.sv b/isa/rv64ui/Makefrag.sv
index ffbfecabcdf1e76bc2b4ee98abc4614c07594449..591a0ccc15160fe63b06d4072bf8bcf69ee2e3ca 100644 (file)
--- a/isa/rv64ui/Makefrag.sv
+++ b/isa/rv64ui/Makefrag.sv
@@ -10,6 +10,7 @@ rv64ui_sv_tests = \
        sv_addi_predicated \
        sv_add_elwidth \
        sv_addw_elwidth \
+       sv_sraw_elwidth \
        sv_ld_elwidth \
        sv_st_elwidth \
        sv_beq \

diff --git a/isa/rv64ui/sv_sraw_elwidth.S b/isa/rv64ui/sv_sraw_elwidth.S
new file mode 100644 (file)
index 0000000..38dc3f3
--- /dev/null
+++ b/isa/rv64ui/sv_sraw_elwidth.S
@@ -0,0 +1,91 @@
+#include "riscv_test.h"
+#include "sv_test_macros.h"
+
+RVTEST_RV64U        # Define TVM used by program.
+
+// TODO: add extra "code" argument and "testdata" argument,
+// replace "sraw" with "code"
+// TODO: move SV_ELWIDTH_TEST to sv_test_macros.h
+// TODO: probably remove testing of x15 and x16 (or pass in as extra args?)
+
+#define SV_ELWIDTH_TEST( vl, wid1, wid2, wid3, isvec1, isvec2, isvec3, \
+                         expect1, expect2, expect3 ) \
+                                                        \
+        SV_LDD_DATA( x12, testdata   , 0);               \
+        SV_LDD_DATA( x13, testdata+8 , 0);               \
+        SV_LDD_DATA( x14, testdata+16, 0);               \
+        SV_LDD_DATA( x15, testdata+24, 0);               \
+        SV_LDD_DATA( x16, testdata+32, 0);               \
+        SV_LDD_DATA( x17, testdata+40, 0);               \
+                                                        \
+        li x28, 0xa5a5a5a5a5a5a5a5;                                      \
+        li x29, 0xa5a5a5a5a5a5a5a5;                                      \
+        li x30, 0xa5a5a5a5a5a5a5a5;                                      \
+                                                        \
+        SET_SV_MVL( vl );                                  \
+        SET_SV_3CSRS( SV_REG_CSR( 1, 15, wid1, 15, isvec1),       \
+                      SV_REG_CSR( 1, 12, wid2, 12, isvec2),        \
+                      SV_REG_CSR( 1, 28, wid3, 28, isvec3));       \
+        SET_SV_VL( vl );                                   \
+                                                        \
+        sraw   x28, x15, x12;                              \
+                                                        \
+        CLR_SV_CSRS();                                  \
+        SET_SV_VL( 1);                                   \
+        SET_SV_MVL( 1);                                  \
+                                                        \
+        TEST_SV_IMM( x28, expect1 );                         \
+        TEST_SV_IMM( x29, expect2 );                       \
+        TEST_SV_IMM( x30, expect3 );                       \
+        TEST_SV_IMM( x15, 0x0000005242322212);                       \
+        TEST_SV_IMM( x16, 0x0000005141312111);
+
+
+# SV test: vector-vector add
+#
+# sets up x3 and x4 with data, sets VL to 2, and carries out
+# an "add 1 to x3".  which actually means "add 1 to x3 *AND* add 1 to x4"
+
+# Test code region.
+RVTEST_CODE_BEGIN   # Start of test code.
+
+        # TODO: add "sraw" argument, add testdata argument
+        SV_ELWIDTH_TEST(  3, 0, 0, 0, 1, 1, 1,
+                0x21,  0x82,  0x0000000000000000 )
+        SV_ELWIDTH_TEST(  3, 0, 0, 3, 1, 1, 1,
+                0x0000008200000021,  0xa5a5a5a500000000,  0xa5a5a5a5a5a5a5a5 )
+        SV_ELWIDTH_TEST(  3, 1, 1, 0, 1, 1, 1,
+                0x9,  0x11,  0x19 )
+        SV_ELWIDTH_TEST(  3, 1, 1, 3, 1, 1, 1,
+                0x0000001100000009,  0xa5a5a5a500000019,  0xa5a5a5a5a5a5a5a5 )
+        SV_ELWIDTH_TEST(  3, 1, 1, 2, 1, 1, 1,
+                0xa5a5001900110009,  0xa5a5a5a5a5a5a5a5,  0xa5a5a5a5a5a5a5a5 )
+        SV_ELWIDTH_TEST(  3, 1, 1, 1, 1, 1, 1,
+                0xa5a5a5a5a5191109,  0xa5a5a5a5a5a5a5a5,  0xa5a5a5a5a5a5a5a5 )
+
+        RVTEST_PASS           # Signal success.
+fail:
+        RVTEST_FAIL
+RVTEST_CODE_END     # End of test code.
+
+# Input data section.
+# This section is optional, and this data is NOT saved in the output.
+.data
+        .align 3
+testdata:
+        .dword 0x0000005949398979
+        .dword 0x0000005747372717
+        .dword 0x0000000000000000
+        .dword 0x0000005242322212
+        .dword 0x0000005141312111
+        .dword 0x0000000000000000
+
+# Output data section.
+RVTEST_DATA_BEGIN   # Start of test output data region.
+        .align 3
+result:
+        .dword -1
+        .dword -1
+        .dword -1
+RVTEST_DATA_END     # End of test output data region.
+