From: Luke Kenneth Casson Leighton <lkcl@lkcl.net>
Date: Thu, 27 Jun 2019 11:51:29 +0000 (+0100)
Subject: add subvl add-immediate test
X-Git-Url: https://git.libre-soc.org/?p=riscv-tests.git;a=commitdiff_plain;h=a924a13af9980c1c6f2c90b66856f9d20bf1daa3

add subvl add-immediate test
---

diff --git a/isa/macros/simplev/sv_test_macros.h b/isa/macros/simplev/sv_test_macros.h
index 2242235..725ed9e 100644
--- a/isa/macros/simplev/sv_test_macros.h
+++ b/isa/macros/simplev/sv_test_macros.h
@@ -67,6 +67,9 @@
 // pass in x0 here.
 #define SET_SV_VL( val )  csrrwi   x0, 0x4f0, (val-1)
 
+// set sub-vector length
+#define SET_SV_SUBVL( val )  csrrwi   x0, 0x4f4, val
+
 #define SV_LD_DATA( reg, from, offs ) \
         la      x1, from; \
         lw      reg, offs(x1)
diff --git a/isa/rv64ui/Makefrag.sv b/isa/rv64ui/Makefrag.sv
index c7130d0..5f1da93 100644
--- a/isa/rv64ui/Makefrag.sv
+++ b/isa/rv64ui/Makefrag.sv
@@ -9,6 +9,7 @@ rv64ui_sv_tests = \
 	sv_addi_vector_vector \
 	sv_addi_predicated \
 	sv_add_elwidth \
+	sv_addi_subvl \
 	sv_addw_elwidth \
 	sv_sraw_elwidth \
 	sv_ld_elwidth \
diff --git a/isa/rv64ui/sv_addi_subvl.S b/isa/rv64ui/sv_addi_subvl.S
new file mode 100644
index 0000000..a707db8
--- /dev/null
+++ b/isa/rv64ui/sv_addi_subvl.S
@@ -0,0 +1,60 @@
+#include "riscv_test.h"
+#include "sv_test_macros.h"
+
+RVTEST_RV64U        # Define TVM used by program.
+
+
+# SV test: vector-vector add
+#
+# sets up x3 and x4 with data, sets VL to 2, and carries out
+# an "add 1 to x3".  which actually means "add 1 to x3 *AND* add 1 to x4"
+
+# Test code region.
+RVTEST_CODE_BEGIN   # Start of test code.
+
+        SV_LD_DATA( x2, testdata   , 0)
+        SV_LD_DATA( x3, testdata+8 , 0)
+        SV_LD_DATA( x4, testdata+16, 0)
+        SV_LD_DATA( x5, testdata+24, 0)
+
+        SET_SV_MVL(1)
+        SET_SV_CSR(1, 3, 0, 3, 1)
+        SET_SV_VL(1)
+        SET_SV_SUBVL(2)
+
+        addi    x3, x3, 1
+
+        CLR_SV_CSRS()
+        SET_SV_VL(1)
+        SET_SV_MVL(1)
+        SET_SV_SUBVL(1)
+
+        TEST_SV_IMM(x2, 1001) # should not be modified
+        TEST_SV_IMM(x3, 42)
+        TEST_SV_IMM(x4, 43)
+        TEST_SV_IMM(x5, 1002) # should not be modified
+
+        RVTEST_PASS           # Signal success.
+fail:
+        RVTEST_FAIL
+RVTEST_CODE_END     # End of test code.
+
+# Input data section.
+# This section is optional, and this data is NOT saved in the output.
+.data
+        .align 3
+testdata:
+        .dword 1001
+        .dword 41
+        .dword 42
+        .dword 1002
+
+# Output data section.
+RVTEST_DATA_BEGIN   # Start of test output data region.
+        .align 3
+result:
+        .dword -1
+        .dword -1
+        .dword -1
+RVTEST_DATA_END     # End of test output data region.
+