riscv-tests.git
4 years agoRemove Hwacha macros
Andrew Waterman [Wed, 4 Jan 2017 19:42:25 +0000 (11:42 -0800)]
Remove Hwacha macros

4 years agoMask off large constants for RV32
Andrew Waterman [Wed, 4 Jan 2017 19:41:08 +0000 (11:41 -0800)]
Mask off large constants for RV32

4 years ago"make clean" shouldn't fail if "make" wasn't first run
Andrew Waterman [Wed, 4 Jan 2017 19:33:09 +0000 (11:33 -0800)]
"make clean" shouldn't fail if "make" wasn't first run

4 years agoIncrease delay in UserInterrupt.
Tim Newsome [Mon, 2 Jan 2017 20:59:41 +0000 (12:59 -0800)]
Increase delay in UserInterrupt.

This makes the test pass reliably (10/10) against the Arty board.
Previously it failed intermittently.

4 years agoUse compressed code if the target supports it.
Tim Newsome [Tue, 27 Dec 2016 19:34:50 +0000 (11:34 -0800)]
Use compressed code if the target supports it.

The main change was to read misa before running any other test. If misa
indicates C is supported, then use compressed code. This required
changing some tests, mostly to ensure correct alignment.  The single
step test also needs to know the correct addresses to step through in
compressed code.

Only print at most 1000 lines from each log file.

4 years agoClean up .pyc files.
Tim Newsome [Tue, 27 Dec 2016 19:19:10 +0000 (11:19 -0800)]
Clean up .pyc files.

4 years agoFix WriteCsrs test.
Tim Newsome [Tue, 13 Dec 2016 19:12:56 +0000 (11:12 -0800)]
Fix WriteCsrs test.

At some point the program changed to use a different register and this
test was never updated. If $x1 pointed somewhere bad, that would result
in an exception.

4 years agoPass newly updated -march, -mabi options to gcc
Andrew Waterman [Tue, 13 Dec 2016 06:51:27 +0000 (22:51 -0800)]
Pass newly updated -march, -mabi options to gcc

4 years agoMerge pull request #38 from richardxia/disable_tcl_and_telnet_servers
Tim Newsome [Tue, 13 Dec 2016 00:06:31 +0000 (16:06 -0800)]
Merge pull request #38 from richardxia/disable_tcl_and_telnet_servers

Disable tcl and telnet servers when running OpenOCD

4 years agoDisable tcl and telnet servers when running OpenOCD because the port numbers might...
Richard Xia [Mon, 12 Dec 2016 21:14:53 +0000 (13:14 -0800)]
Disable tcl and telnet servers when running OpenOCD because the port numbers might conflict with other processes.

4 years agoAdd test of compare-sections command.
Tim Newsome [Fri, 9 Dec 2016 17:25:03 +0000 (09:25 -0800)]
Add test of compare-sections command.

4 years agoUse XLEN macro for these sources as well.
Tim Newsome [Thu, 8 Dec 2016 04:42:31 +0000 (20:42 -0800)]
Use XLEN macro for these sources as well.

All tests pass on spike32 and spike64 again.

4 years agoUse our own XLEN macro.
Tim Newsome [Thu, 8 Dec 2016 04:03:36 +0000 (20:03 -0800)]
Use our own XLEN macro.

Relying on something that the compiler automatically sets is apparently
not reliable.

4 years agoWe *do* need the FPU to compile 64-bit code.
Tim Newsome [Thu, 8 Dec 2016 03:52:00 +0000 (19:52 -0800)]
We *do* need the FPU to compile 64-bit code.

4 years agoPut env back where it was.
Tim Newsome [Thu, 8 Dec 2016 03:51:05 +0000 (19:51 -0800)]
Put env back where it was.

Fixes #37.

4 years agoDon't compile with FPU support for now.
Tim Newsome [Thu, 8 Dec 2016 02:32:15 +0000 (18:32 -0800)]
Don't compile with FPU support for now.

It's not Just Working, and none of the tests so far actually care.

4 years agoNicely display compile failures.
Tim Newsome [Thu, 8 Dec 2016 02:21:11 +0000 (18:21 -0800)]
Nicely display compile failures.

4 years agoDon't eat compile errors.
Tim Newsome [Thu, 8 Dec 2016 02:00:13 +0000 (18:00 -0800)]
Don't eat compile errors.

4 years agoFix race when finding the port OpenOCD is using.
Tim Newsome [Thu, 8 Dec 2016 01:52:26 +0000 (17:52 -0800)]
Fix race when finding the port OpenOCD is using.

4 years agoavoid non-standard predefined macros
Andrew Waterman [Wed, 7 Dec 2016 01:04:14 +0000 (17:04 -0800)]
avoid non-standard predefined macros

5 years agoRemove cache miss test from all but one AMO test
Andrew Waterman [Mon, 21 Nov 2016 23:29:09 +0000 (15:29 -0800)]
Remove cache miss test from all but one AMO test

This doesn't reduce coverage for cache-based RV64 systems, but will
improve test runtime and work around the need for smaller test footprint
for scratchpad-based RV32 systems.

I would argue that these microarchitectural tests should be in the
domain of torture, and that the last one should be removed, too.

5 years agoAttempt to work around hard-float linking problem
Andrew Waterman [Tue, 15 Nov 2016 07:26:32 +0000 (23:26 -0800)]
Attempt to work around hard-float linking problem

5 years agoMerge pull request #35 from richardxia/have-openocd-pick-gdb-server-port
Tim Newsome [Fri, 11 Nov 2016 20:19:46 +0000 (12:19 -0800)]
Merge pull request #35 from richardxia/have-openocd-pick-gdb-server-port

Tell OpenOCD to pick an unused port for gdb server

5 years agoDecrease sleep time to 0.1s.
Richard Xia [Thu, 10 Nov 2016 22:24:08 +0000 (14:24 -0800)]
Decrease sleep time to 0.1s.

5 years agoTell OpenOCD to pick an unused port, and use lsof to figure out which one it picked.
Richard Xia [Fri, 4 Nov 2016 23:18:38 +0000 (16:18 -0700)]
Tell OpenOCD to pick an unused port, and use lsof to figure out which one it picked.

5 years agoMake sure FP stores don't write memory if mstatus.FS=0.
Andrew Waterman [Tue, 1 Nov 2016 07:34:54 +0000 (00:34 -0700)]
Make sure FP stores don't write memory if mstatus.FS=0.

5 years agoAdd basic floating point register test.
Tim Newsome [Mon, 31 Oct 2016 20:30:44 +0000 (13:30 -0700)]
Add basic floating point register test.

5 years agoImprove reg test a little.
Tim Newsome [Fri, 21 Oct 2016 17:51:44 +0000 (10:51 -0700)]
Improve reg test a little.

5 years agoTest OpenOCD step and resume.
Tim Newsome [Thu, 20 Oct 2016 21:49:44 +0000 (14:49 -0700)]
Test OpenOCD step and resume.

5 years agoFix conflict: JTAG VPI changes vs openocd refactor
Tim Newsome [Wed, 19 Oct 2016 20:38:26 +0000 (13:38 -0700)]
Fix conflict: JTAG VPI changes vs openocd refactor

5 years agoActually test something in regs test.
Tim Newsome [Wed, 19 Oct 2016 20:16:47 +0000 (13:16 -0700)]
Actually test something in regs test.

5 years agoMerge pull request #34 from richardxia/use-port-randomization
Tim Newsome [Wed, 19 Oct 2016 17:52:59 +0000 (10:52 -0700)]
Merge pull request #34 from richardxia/use-port-randomization

Use port randomization for VCS and OpenOCD

5 years agoPull port number from VCS output and pass to OpenOCD.
Richard Xia [Tue, 18 Oct 2016 21:38:24 +0000 (14:38 -0700)]
Pull port number from VCS output and pass to OpenOCD.

5 years agoAdd framework to test OpenOCD directly.
Tim Newsome [Tue, 18 Oct 2016 21:21:02 +0000 (14:21 -0700)]
Add framework to test OpenOCD directly.

This took a lot of refactoring to make it look reasonable.
There isn't actually any functional OpenOCD test yet. But a dummy test
runs a command (and fails).

5 years agoRandomize gdb port.
Richard Xia [Tue, 18 Oct 2016 18:31:25 +0000 (11:31 -0700)]
Randomize gdb port.

5 years agoWait for OpenOCD to start fully before connecting.
Tim Newsome [Fri, 14 Oct 2016 19:41:41 +0000 (12:41 -0700)]
Wait for OpenOCD to start fully before connecting.

Requires OpenOCD change 4eba841bfee4b6c347423ac28851ab7ee7e75532

5 years agoAdd MemTestWriteInvalid.
Tim Newsome [Thu, 13 Oct 2016 18:32:02 +0000 (11:32 -0700)]
Add MemTestWriteInvalid.

5 years agoAlign FP data sections
Andrew Waterman [Mon, 10 Oct 2016 05:13:31 +0000 (22:13 -0700)]
Align FP data sections

5 years agoAdd test for memory read from invalid address.
Tim Newsome [Mon, 3 Oct 2016 17:40:17 +0000 (10:40 -0700)]
Add test for memory read from invalid address.

5 years agoTolerate remotes that return memory read errors.
Tim Newsome [Fri, 30 Sep 2016 19:11:03 +0000 (12:11 -0700)]
Tolerate remotes that return memory read errors.

5 years agoUpdate dmode test to match spec.
Tim Newsome [Thu, 29 Sep 2016 18:42:41 +0000 (11:42 -0700)]
Update dmode test to match spec.

M-mode writes to triggers with dmode set are now ignored instead of
raising an exception.

Also added -f/--fail-fast option to gdbserver.

5 years agoClear triggers during entry.
Tim Newsome [Thu, 29 Sep 2016 18:38:54 +0000 (11:38 -0700)]
Clear triggers during entry.

If the last test leaves some triggers set they should be cleaned up.

5 years agoDisable TriggerDmode while spike is changed.
Tim Newsome [Wed, 28 Sep 2016 15:18:14 +0000 (08:18 -0700)]
Disable TriggerDmode while spike is changed.

5 years agoMove debug testing from all into debug-check target.
Tim Newsome [Wed, 21 Sep 2016 17:23:35 +0000 (10:23 -0700)]
Move debug testing from all into debug-check target.

Fixes issue #30.

5 years agoMinor tweaks to trigger tests for openocd.
Tim Newsome [Tue, 20 Sep 2016 16:47:11 +0000 (09:47 -0700)]
Minor tweaks to trigger tests for openocd.

5 years agoRewrite debug testing.
Tim Newsome [Thu, 15 Sep 2016 20:11:56 +0000 (13:11 -0700)]
Rewrite debug testing.

No longer use unittest. Now tests can return not_applicable if eg. a
desired execution mode isn't implemented on a target. Also we do a
better job killing spike processes when a test fails.

Did a lot of code cleanup, partly by using pylint.

Fix the Makefile so that if the test fails, 'make' actually fails too.

5 years agoAdd rv32uf tests
Andrew Waterman [Wed, 7 Sep 2016 06:58:57 +0000 (23:58 -0700)]
Add rv32uf tests

5 years agoMake RVC test fit in 16 KiB
Andrew Waterman [Fri, 2 Sep 2016 22:42:02 +0000 (15:42 -0700)]
Make RVC test fit in 16 KiB

5 years agoFix/add to instant trigger tests.
Tim Newsome [Fri, 2 Sep 2016 19:27:14 +0000 (12:27 -0700)]
Fix/add to instant trigger tests.

5 years agoLimit spike RAM so I can run valgrind on it.
Tim Newsome [Fri, 2 Sep 2016 16:12:32 +0000 (09:12 -0700)]
Limit spike RAM so I can run valgrind on it.

5 years agoAdd some immediate trigger tests.
Tim Newsome [Thu, 1 Sep 2016 20:17:56 +0000 (13:17 -0700)]
Add some immediate trigger tests.

5 years agoCreate TriggerTest.
Tim Newsome [Thu, 1 Sep 2016 17:07:54 +0000 (10:07 -0700)]
Create TriggerTest.

5 years agoAdd test for address triggers.
Tim Newsome [Tue, 23 Aug 2016 00:54:51 +0000 (17:54 -0700)]
Add test for address triggers.

5 years agoRemove "import ." notation.
Tim Newsome [Thu, 1 Sep 2016 20:18:29 +0000 (13:18 -0700)]
Remove "import ." notation.

Doesn't work with Python 2.7.9 which is the default in latest Debian.

5 years agoAdd .pyc to .gitignore.
Tim Newsome [Thu, 1 Sep 2016 16:38:26 +0000 (09:38 -0700)]
Add .pyc to .gitignore.

5 years agoChange accidental use of SLTIU in SLTI tests (#26)
Brett Cannon [Wed, 31 Aug 2016 18:59:23 +0000 (11:59 -0700)]
Change accidental use of SLTIU in SLTI tests (#26)

5 years agoShare code between rv32ui and rv64ui tests
Andrew Waterman [Tue, 30 Aug 2016 20:02:59 +0000 (13:02 -0700)]
Share code between rv32ui and rv64ui tests

They were almost identical, so I made them actually identical.  This
will reduce the burden of writing further tests that span base ISAs.

Tests can still be specialized for XLEN with ifdefs on e.g. __riscv64.

5 years agoAdd missing RV32 slt[i]u tests
Andrew Waterman [Tue, 30 Aug 2016 18:11:08 +0000 (11:11 -0700)]
Add missing RV32 slt[i]u tests

Closes #12.

5 years agoOn RV32, zero-extend pointers for HTIF
Andrew Waterman [Mon, 29 Aug 2016 20:42:37 +0000 (13:42 -0700)]
On RV32, zero-extend pointers for HTIF

5 years agoDon't explicitly use atomics in rsort
Andrew Waterman [Mon, 29 Aug 2016 20:41:16 +0000 (13:41 -0700)]
Don't explicitly use atomics in rsort

This is a pattern GCC should pick up for targets where AMOADD is faster
than LW/ADD/SW.

5 years agoUpdate to new breakpoint & counter spec
Andrew Waterman [Sat, 27 Aug 2016 02:53:25 +0000 (19:53 -0700)]
Update to new breakpoint & counter spec

5 years agoMerge pull request #24 from richardxia/declare-dependencies
Tim Newsome [Tue, 23 Aug 2016 21:34:59 +0000 (14:34 -0700)]
Merge pull request #24 from richardxia/declare-dependencies

Add requirements.txt and reorder imports by type.

5 years agoUse a version range.
Richard Xia [Tue, 23 Aug 2016 21:25:47 +0000 (14:25 -0700)]
Use a version range.

5 years agoAdd requirements.txt and reorder imports by type.
Richard Xia [Tue, 23 Aug 2016 01:16:53 +0000 (18:16 -0700)]
Add requirements.txt and reorder imports by type.

5 years agoUse env shebang so for virtualenv compatibility.
Tim Newsome [Tue, 23 Aug 2016 00:59:41 +0000 (17:59 -0700)]
Use env shebang so for virtualenv compatibility.

5 years agoImprove AMO tests
Andrew Waterman [Wed, 17 Aug 2016 07:37:17 +0000 (00:37 -0700)]
Improve AMO tests

- avoid code duplication between RV32 and RV64 variants
- make LR/SC do something interesting on uniprocessors
- avoid requiring M extension

5 years agoFix missing setup in test_turbostep.
Tim Newsome [Tue, 16 Aug 2016 17:44:16 +0000 (10:44 -0700)]
Fix missing setup in test_turbostep.

5 years agoSimplify test_function_call.
Tim Newsome [Mon, 15 Aug 2016 19:52:03 +0000 (12:52 -0700)]
Simplify test_function_call.

Now it doesn't rely on malloc, which can be tricky to get to work in and
of itself.

5 years agobump env
Andrew Waterman [Tue, 16 Aug 2016 18:01:27 +0000 (11:01 -0700)]
bump env

5 years agoMake ENTROPY deterministic
Andrew Waterman [Tue, 16 Aug 2016 07:46:27 +0000 (00:46 -0700)]
Make ENTROPY deterministic

Base it on the output filename, not the pid.  This still gets decent
coverage, but is deterministic.

5 years agoAdd --32 and --64 options to gdbserver.py.
Tim Newsome [Mon, 15 Aug 2016 17:28:01 +0000 (10:28 -0700)]
Add --32 and --64 options to gdbserver.py.

5 years agoFix cut and paste bug.
Tim Newsome [Mon, 15 Aug 2016 17:54:34 +0000 (10:54 -0700)]
Fix cut and paste bug.

Also minor style changes.

5 years agoMerge pull request #21 from sifive/add_freedom_sim_targets
Tim Newsome [Fri, 12 Aug 2016 01:43:46 +0000 (18:43 -0700)]
Merge pull request #21 from sifive/add_freedom_sim_targets

Add freedom sim targets

5 years agoAdd FreedomU500 & incorporate feedback
Megan Wachs [Thu, 11 Aug 2016 20:43:04 +0000 (13:43 -0700)]
Add FreedomU500 & incorporate feedback

5 years agoMake simple memory test errors more readable.
Tim Newsome [Thu, 11 Aug 2016 19:15:04 +0000 (12:15 -0700)]
Make simple memory test errors more readable.

5 years agomove fclass macros into the same file as the rest (#22)
Colin Schmidt [Mon, 8 Aug 2016 23:08:32 +0000 (16:08 -0700)]
move fclass macros into the same file as the rest (#22)

5 years agoBy default debug=False
Megan Wachs [Mon, 8 Aug 2016 19:24:44 +0000 (12:24 -0700)]
By default debug=False

5 years agoAdd U500 Target
Megan Wachs [Mon, 8 Aug 2016 18:34:32 +0000 (11:34 -0700)]
Add U500 Target

5 years agoSome code cleanup
Megan Wachs [Fri, 5 Aug 2016 21:50:14 +0000 (14:50 -0700)]
Some code cleanup

5 years agoAdded FreedomE300 Simulator target
Megan Wachs [Thu, 4 Aug 2016 21:21:37 +0000 (14:21 -0700)]
Added FreedomE300 Simulator target

5 years agoMerge remote-tracking branch 'origin/master'
Megan Wachs [Mon, 8 Aug 2016 18:41:25 +0000 (11:41 -0700)]
Merge remote-tracking branch 'origin/master'

5 years agoRe-enable debug testing. (#20)
Tim Newsome [Mon, 1 Aug 2016 17:37:03 +0000 (10:37 -0700)]
Re-enable debug testing. (#20)

Manually ran all the steps travis does, and the tests pass.

5 years agoAdd RV32 RVC and breakpoint tests
Andrew Waterman [Fri, 29 Jul 2016 21:47:26 +0000 (14:47 -0700)]
Add RV32 RVC and breakpoint tests

5 years agoAdd an RVC test
Andrew Waterman [Fri, 29 Jul 2016 20:59:33 +0000 (13:59 -0700)]
Add an RVC test

5 years agoAdd tests for virtual priv register.
Tim Newsome [Thu, 28 Jul 2016 21:47:12 +0000 (14:47 -0700)]
Add tests for virtual priv register.

Users can use this register to inspect and change the privilege level of
the core. It doesn't make any assumptions about the actual underlying
debug mechanism (as opposed to having the user change DCSR directly,
which may not exist in all debug implementations).

5 years agoAdd --gdb argument so I can run valgrind on gdb.
Tim Newsome [Thu, 28 Jul 2016 17:26:47 +0000 (10:26 -0700)]
Add --gdb argument so I can run valgrind on gdb.

5 years agoRename m2gl_m2s to freedom-e300. (#19)
Tim Newsome [Wed, 27 Jul 2016 23:05:09 +0000 (16:05 -0700)]
Rename m2gl_m2s to freedom-e300. (#19)

It's possible to flash the Freedom E300 onto different FPGA boards, and
then debug them in the exact same way.

5 years agoRename m2gl_m2s to freedom-e300.
Tim Newsome [Wed, 27 Jul 2016 21:34:40 +0000 (14:34 -0700)]
Rename m2gl_m2s to freedom-e300.

It's possible to flash the Freedom E300 onto different FPGA boards, and
then debug them in the exact same way.

5 years agoMerge pull request #18 from sifive/master
Andrew Waterman [Mon, 25 Jul 2016 18:32:15 +0000 (11:32 -0700)]
Merge pull request #18 from sifive/master

Display log file during build if debug testing fails.

5 years agoDisplay log file during build if testing fails.
Tim Newsome [Mon, 25 Jul 2016 18:19:06 +0000 (11:19 -0700)]
Display log file during build if testing fails.

That way somebody doesn't need to spend forever trying to reproduce a
travis failure when all they really need is the logfile.

5 years agoTemporarily stop building debug tests, as they fail in travis
Andrew Waterman [Fri, 22 Jul 2016 22:16:29 +0000 (15:16 -0700)]
Temporarily stop building debug tests, as they fail in travis

@timsifive can you look into why?

https://travis-ci.org/riscv/riscv-tools/builds/146759105

5 years agoskip user-mode trap tests in rv32mi/rv64mi-p-csr if no user mode
Howard Mao [Fri, 22 Jul 2016 21:20:28 +0000 (14:20 -0700)]
skip user-mode trap tests in rv32mi/rv64mi-p-csr if no user mode

5 years agoMove rv32mi dirty bit test to rv32si
Andrew Waterman [Fri, 22 Jul 2016 18:58:18 +0000 (11:58 -0700)]
Move rv32mi dirty bit test to rv32si

5 years agoMove dirty bit test to rv64si directory
Andrew Waterman [Fri, 22 Jul 2016 18:25:52 +0000 (11:25 -0700)]
Move dirty bit test to rv64si directory

Not sure this is quite right, since the test technically runs in M-mode.

Also, remove unused rdnpc/example tests.

5 years agoSimplify fence.i test for RVC
Andrew Waterman [Wed, 20 Jul 2016 01:15:01 +0000 (18:15 -0700)]
Simplify fence.i test for RVC

5 years agoMake ma_fetch test robust against code size changes
Andrew Waterman [Tue, 19 Jul 2016 19:23:22 +0000 (12:23 -0700)]
Make ma_fetch test robust against code size changes

5 years agoMerge pull request #17 from timsifive/debug
Andrew Waterman [Wed, 20 Jul 2016 00:10:24 +0000 (17:10 -0700)]
Merge pull request #17 from timsifive/debug

Add end-to-end debug tests

5 years agoRun debug tests from main Makefile.
Tim Newsome [Tue, 19 Jul 2016 18:07:03 +0000 (11:07 -0700)]
Run debug tests from main Makefile.

5 years agoUse unique filenames for block test.
Tim Newsome [Tue, 19 Jul 2016 01:41:57 +0000 (18:41 -0700)]
Use unique filenames for block test.

Fixes occasional failure when multiple tests are run at once.

5 years agoAdd 32-bit support.
Tim Newsome [Tue, 19 Jul 2016 01:33:10 +0000 (18:33 -0700)]
Add 32-bit support.