from nmigen import Module, Elaboratable, Signal, Mux, Const, Cat, Repl, Record
from nmigen.cli import rtlil
+from soc.regfile.regfiles import XERRegs
+from nmutil.picker import PriorityPicker
from nmutil.iocontrol import RecordObject
from nmutil.extend import exts
+from soc.experiment.mem_types import LDSTException
+
from soc.decoder.power_regspec_map import regspec_decode_read
from soc.decoder.power_regspec_map import regspec_decode_write
from soc.decoder.power_decoder import create_pdecode
from soc.decoder.power_enums import (MicrOp, CryIn, Function,
CRInSel, CROutSel,
LdstLen, In1Sel, In2Sel, In3Sel,
- OutSel, SPR, RC, LDSTMode)
-from soc.decoder.decode2execute1 import Decode2ToExecute1Type, Data
+ OutSel, SPR, RC, LDSTMode,
+ SVEXTRA, SVEtype)
+from soc.decoder.decode2execute1 import (Decode2ToExecute1Type, Data,
+ Decode2ToOperand)
+from soc.sv.svp64 import SVP64Rec
from soc.consts import MSR
from soc.regfile.regfiles import FastRegs
from soc.consts import TT
+from soc.config.state import CoreState
+from soc.regfile.util import spr_to_fast
def decode_spr_num(spr):
class SPRMap(Elaboratable):
- """SPRMap: maps POWER9 SPR numbers to internal enum values
+ """SPRMap: maps POWER9 SPR numbers to internal enum values, fast and slow
"""
def __init__(self):
self.spr_i = Signal(10, reset_less=True)
- self.spr_o = Signal(SPR, reset_less=True)
+ self.spr_o = Data(SPR, name="spr_o")
+ self.fast_o = Data(3, name="fast_o")
def elaborate(self, platform):
m = Module()
with m.Switch(self.spr_i):
for i, x in enumerate(SPR):
with m.Case(x.value):
- m.d.comb += self.spr_o.eq(i)
+ m.d.comb += self.spr_o.data.eq(i)
+ m.d.comb += self.spr_o.ok.eq(1)
+ for x, v in spr_to_fast.items():
+ with m.Case(x.value):
+ m.d.comb += self.fast_o.data.eq(v)
+ m.d.comb += self.fast_o.ok.eq(1)
+ return m
+
+
+class SVP64RegExtra(Elaboratable):
+ """SVP64RegExtra - decodes SVP64 Extra fields to determine reg extension
+
+ incoming 5-bit GPR/FP is turned into a 7-bit and marked as scalar/vector
+ depending on info in one of the positions in the EXTRA field.
+
+ designed so that "no change" to the 5-bit register number occurs if
+ SV either does not apply or the relevant EXTRA2/3 field bits are zero.
+
+ see https://libre-soc.org/openpower/sv/svp64/
+ """
+ def __init__(self):
+ self.extra = Signal(10, reset_less=True)
+ self.etype = Signal(SVEtype, reset_less=True) # 2 or 3 bits
+ self.idx = Signal(SVEXTRA, reset_less=True) # which part of extra
+ self.reg_in = Signal(5) # incoming reg number (5 bits, RA, RB)
+ self.reg_out = Signal(7) # extra-augmented output (7 bits)
+ self.isvec = Signal(1) # reg is marked as vector if true
+
+ def elaborate(self, platform):
+ m = Module()
+ comb = m.d.comb
+
+ # first get the spec. if not changed it's "scalar identity behaviour"
+ # which is zero which is ok.
+ spec = Signal(3)
+
+ # back in the LDSTRM-* and RM-* files generated by sv_analysis.py
+ # we marked every op with an Etype: EXTRA2 or EXTRA3, and also said
+ # which of the 4 (or 3 for EXTRA3) sub-fields of bits 10:18 contain
+ # the register-extension information. extract those how
+ with m.Switch(self.etype):
+ # 2-bit index selection mode
+ with m.Case(SVEtype.EXTRA2):
+ with m.Switch(self.idx):
+ with m.Case(SVEXTRA.Idx0): # 1st 2 bits
+ comb += spec[1:3].eq(self.extra[0:2])
+ with m.Case(SVEXTRA.Idx1): # 2nd 2 bits
+ comb += spec[1:3].eq(self.extra[2:4])
+ with m.Case(SVEXTRA.Idx2): # 3rd 2 bits
+ comb += spec[1:3].eq(self.extra[4:6])
+ with m.Case(SVEXTRA.Idx3): # 4th 2 bits
+ comb += spec[1:3].eq(self.extra[6:8])
+ # 3-bit index selection mode
+ with m.Case(SVEtype.EXTRA3):
+ with m.Switch(self.idx):
+ with m.Case(SVEXTRA.Idx0): # 1st 3 bits
+ comb += spec.eq(self.extra[0:3])
+ with m.Case(SVEXTRA.Idx1): # 2nd 3 bits
+ comb += spec.eq(self.extra[3:6])
+ with m.Case(SVEXTRA.Idx2): # 3rd 3 bits
+ comb += spec.eq(self.extra[6:9])
+ # cannot fit more than 9 bits so there is no 4th thing
+
+ # now decode it. bit 2 is "scalar/vector". note that spec could be zero
+ # from above, which (by design) has the effect of "no change", below.
+
+ # simple: isvec is top bit of spec
+ comb += self.isvec.eq(spec[2])
+
+ # decode vector differently from scalar
+ with m.If(self.isvec):
+ # Vector: shifted up, extra in LSBs (RA << 2) | spec[0:1]
+ comb += self.reg_out.eq(Cat(spec[:2], self.reg_in))
+ with m.Else():
+ # Scalar: not shifted up, extra in MSBs RA | (spec[0:1] << 5)
+ comb += self.reg_out.eq(Cat(self.reg_in, spec[:2]))
+
return m
class DecodeA(Elaboratable):
"""DecodeA from instruction
- decodes register RA, whether immediate-zero, implicit and
- explicit CSRs
+ decodes register RA, implicit and explicit CSRs
"""
def __init__(self, dec):
self.dec = dec
+ self.sv_rm = SVP64Rec() # SVP64 RM field
self.sel_in = Signal(In1Sel, reset_less=True)
self.insn_in = Signal(32, reset_less=True)
- self.reg_out = Data(5, name="reg_a")
- self.immz_out = Signal(reset_less=True)
+ self.reg_out = Data(7, name="reg_a")
+ self.reg_isvec = Signal(1, name="reg_a_isvec") # TODO: in reg_out
self.spr_out = Data(SPR, "spr_a")
self.fast_out = Data(3, "fast_a")
def elaborate(self, platform):
m = Module()
comb = m.d.comb
+ op = self.dec.op
m.submodules.sprmap = sprmap = SPRMap()
+ m.submodules.svdec = svdec = SVP64RegExtra()
+
+ # get the 5-bit reg data before svp64-munging it into 7-bit plus isvec
+ reg = Signal(5, reset_less=True)
# select Register A field
ra = Signal(5, reset_less=True)
with m.If((self.sel_in == In1Sel.RA) |
((self.sel_in == In1Sel.RA_OR_ZERO) &
(ra != Const(0, 5)))):
- comb += self.reg_out.data.eq(ra)
+ comb += reg.eq(ra)
comb += self.reg_out.ok.eq(1)
- # zero immediate requested
- with m.If((self.sel_in == In1Sel.RA_OR_ZERO) &
- (self.reg_out.data == Const(0, 5))):
- comb += self.immz_out.eq(1)
-
# some Logic/ALU ops have RS as the 3rd arg, but no "RA".
+ # moved it to 1st position (in1_sel)... because
+ rs = Signal(5, reset_less=True)
+ comb += rs.eq(self.dec.RS)
with m.If(self.sel_in == In1Sel.RS):
- comb += self.reg_out.data.eq(self.dec.RS)
+ comb += reg.eq(rs)
comb += self.reg_out.ok.eq(1)
+ # now do the SVP64 munging. op.SV_Etype and op.sv_in1 comes from
+ # PowerDecoder which in turn comes from LDST-RM*.csv and RM-*.csv
+ # which in turn were auto-generated by sv_analysis.py
+
+ extra = self.sv_rm.extra # SVP64 extra bits 10:18
+ comb += svdec.extra.eq(extra) # EXTRA field of SVP64 RM
+ comb += svdec.etype.eq(op.SV_Etype) # EXTRA2/3 for this insn
+ comb += svdec.idx.eq(op.sv_in1) # SVP64 reg #1 (matches in1_sel)
+ comb += svdec.reg_in.eq(reg) # 5-bit (RA, RS)
+
+ # outputs: 7-bit reg number and whether it's vectorised
+ comb += self.reg_out.data.eq(svdec.reg_out)
+ comb += self.reg_isvec.eq(svdec.isvec)
+
# decode Fast-SPR based on instruction type
- op = self.dec.op
with m.Switch(op.internal_op):
# BC or BCREG: implicit register (CTR) NOTE: same in DecodeOut
with m.Case(MicrOp.OP_MFSPR):
spr = Signal(10, reset_less=True)
comb += spr.eq(decode_spr_num(self.dec.SPR)) # from XFX
- with m.Switch(spr):
- # fast SPRs
- with m.Case(SPR.CTR.value):
- comb += self.fast_out.data.eq(FastRegs.CTR)
- comb += self.fast_out.ok.eq(1)
- with m.Case(SPR.LR.value):
- comb += self.fast_out.data.eq(FastRegs.LR)
- comb += self.fast_out.ok.eq(1)
- with m.Case(SPR.TAR.value):
- comb += self.fast_out.data.eq(FastRegs.TAR)
- comb += self.fast_out.ok.eq(1)
- with m.Case(SPR.SRR0.value):
- comb += self.fast_out.data.eq(FastRegs.SRR0)
- comb += self.fast_out.ok.eq(1)
- with m.Case(SPR.SRR1.value):
- comb += self.fast_out.data.eq(FastRegs.SRR1)
- comb += self.fast_out.ok.eq(1)
- with m.Case(SPR.XER.value):
- pass # do nothing
- # : map to internal SPR numbers
- # XXX TODO: dec and tb not to go through mapping.
- with m.Default():
- comb += sprmap.spr_i.eq(spr)
- comb += self.spr_out.data.eq(sprmap.spr_o)
- comb += self.spr_out.ok.eq(1)
+ comb += sprmap.spr_i.eq(spr)
+ comb += self.spr_out.eq(sprmap.spr_o)
+ comb += self.fast_out.eq(sprmap.fast_o)
+
+ return m
+
+
+class DecodeAImm(Elaboratable):
+ """DecodeA immediate from instruction
+
+ decodes register RA, whether immediate-zero, implicit and
+ explicit CSRs
+ """
+
+ def __init__(self, dec):
+ self.dec = dec
+ self.sel_in = Signal(In1Sel, reset_less=True)
+ self.immz_out = Signal(reset_less=True)
+
+ def elaborate(self, platform):
+ m = Module()
+ comb = m.d.comb
+
+ # zero immediate requested
+ ra = Signal(5, reset_less=True)
+ comb += ra.eq(self.dec.RA)
+ with m.If((self.sel_in == In1Sel.RA_OR_ZERO) & (ra == Const(0, 5))):
+ comb += self.immz_out.eq(1)
return m
def __init__(self, dec):
self.dec = dec
+ self.sv_rm = SVP64Rec() # SVP64 RM field
self.sel_in = Signal(In2Sel, reset_less=True)
self.insn_in = Signal(32, reset_less=True)
- self.reg_out = Data(5, "reg_b")
- self.imm_out = Data(64, "imm_b")
+ self.reg_out = Data(7, "reg_b")
+ self.reg_isvec = Signal(1, name="reg_b_isvec") # TODO: in reg_out
self.fast_out = Data(3, "fast_b")
def elaborate(self, platform):
m = Module()
comb = m.d.comb
+ op = self.dec.op
+ m.submodules.svdec = svdec = SVP64RegExtra()
+
+ # get the 5-bit reg data before svp64-munging it into 7-bit plus isvec
+ reg = Signal(5, reset_less=True)
# select Register B field
with m.Switch(self.sel_in):
with m.Case(In2Sel.RB):
- comb += self.reg_out.data.eq(self.dec.RB)
+ comb += reg.eq(self.dec.RB)
comb += self.reg_out.ok.eq(1)
with m.Case(In2Sel.RS):
# for M-Form shiftrot
- comb += self.reg_out.data.eq(self.dec.RS)
+ comb += reg.eq(self.dec.RS)
comb += self.reg_out.ok.eq(1)
- with m.Case(In2Sel.CONST_UI):
+
+ # now do the SVP64 munging. different from DecodeA only by sv_in2
+
+ extra = self.sv_rm.extra # SVP64 extra bits 10:18
+ comb += svdec.extra.eq(extra) # EXTRA field of SVP64 RM
+ comb += svdec.etype.eq(op.SV_Etype) # EXTRA2/3 for this insn
+ comb += svdec.idx.eq(op.sv_in2) # SVP64 reg #2 (matches in2_sel)
+ comb += svdec.reg_in.eq(reg) # 5-bit (RA, RS)
+
+ # outputs: 7-bit reg number and whether it's vectorised
+ comb += self.reg_out.data.eq(svdec.reg_out)
+ comb += self.reg_isvec.eq(svdec.isvec)
+
+ # decode SPR2 based on instruction type
+ # BCREG implicitly uses LR or TAR for 2nd reg
+ # CTR however is already in fast_spr1 *not* 2.
+ with m.If(op.internal_op == MicrOp.OP_BCREG):
+ xo9 = self.dec.FormXL.XO[9] # 3.0B p38 top bit of XO
+ xo5 = self.dec.FormXL.XO[5] # 3.0B p38
+ with m.If(~xo9):
+ comb += self.fast_out.data.eq(FastRegs.LR)
+ comb += self.fast_out.ok.eq(1)
+ with m.Elif(xo5):
+ comb += self.fast_out.data.eq(FastRegs.TAR)
+ comb += self.fast_out.ok.eq(1)
+
+ return m
+
+
+class DecodeBImm(Elaboratable):
+ """DecodeB immediate from instruction
+ """
+ def __init__(self, dec):
+ self.dec = dec
+ self.sel_in = Signal(In2Sel, reset_less=True)
+ self.imm_out = Data(64, "imm_b")
+
+ def elaborate(self, platform):
+ m = Module()
+ comb = m.d.comb
+
+ # select Register B Immediate
+ with m.Switch(self.sel_in):
+ with m.Case(In2Sel.CONST_UI): # unsigned
comb += self.imm_out.data.eq(self.dec.UI)
comb += self.imm_out.ok.eq(1)
- with m.Case(In2Sel.CONST_SI): # TODO: sign-extend here?
- comb += self.imm_out.data.eq(
- exts(self.dec.SI, 16, 64))
+ with m.Case(In2Sel.CONST_SI): # sign-extended 16-bit
+ si = Signal(16, reset_less=True)
+ comb += si.eq(self.dec.SI)
+ comb += self.imm_out.data.eq(exts(si, 16, 64))
comb += self.imm_out.ok.eq(1)
- with m.Case(In2Sel.CONST_UI_HI):
- comb += self.imm_out.data.eq(self.dec.UI << 16)
+ with m.Case(In2Sel.CONST_SI_HI): # sign-extended 16+16=32 bit
+ si_hi = Signal(32, reset_less=True)
+ comb += si_hi.eq(self.dec.SI << 16)
+ comb += self.imm_out.data.eq(exts(si_hi, 32, 64))
comb += self.imm_out.ok.eq(1)
- with m.Case(In2Sel.CONST_SI_HI): # TODO: sign-extend here?
- comb += self.imm_out.data.eq(self.dec.SI << 16)
- comb += self.imm_out.data.eq(
- exts(self.dec.SI << 16, 32, 64))
+ with m.Case(In2Sel.CONST_UI_HI): # unsigned
+ ui = Signal(16, reset_less=True)
+ comb += ui.eq(self.dec.UI)
+ comb += self.imm_out.data.eq(ui << 16)
comb += self.imm_out.ok.eq(1)
- with m.Case(In2Sel.CONST_LI):
- comb += self.imm_out.data.eq(self.dec.LI << 2)
+ with m.Case(In2Sel.CONST_LI): # sign-extend 24+2=26 bit
+ li = Signal(26, reset_less=True)
+ comb += li.eq(self.dec.LI << 2)
+ comb += self.imm_out.data.eq(exts(li, 26, 64))
comb += self.imm_out.ok.eq(1)
- with m.Case(In2Sel.CONST_BD):
- comb += self.imm_out.data.eq(self.dec.BD << 2)
+ with m.Case(In2Sel.CONST_BD): # sign-extend (14+2)=16 bit
+ bd = Signal(16, reset_less=True)
+ comb += bd.eq(self.dec.BD << 2)
+ comb += self.imm_out.data.eq(exts(bd, 16, 64))
comb += self.imm_out.ok.eq(1)
- with m.Case(In2Sel.CONST_DS):
- comb += self.imm_out.data.eq(self.dec.DS << 2)
+ with m.Case(In2Sel.CONST_DS): # sign-extended (14+2=16) bit
+ ds = Signal(16, reset_less=True)
+ comb += ds.eq(self.dec.DS << 2)
+ comb += self.imm_out.data.eq(exts(ds, 16, 64))
comb += self.imm_out.ok.eq(1)
- with m.Case(In2Sel.CONST_M1):
+ with m.Case(In2Sel.CONST_M1): # signed (-1)
comb += self.imm_out.data.eq(~Const(0, 64)) # all 1s
comb += self.imm_out.ok.eq(1)
- with m.Case(In2Sel.CONST_SH):
+ with m.Case(In2Sel.CONST_SH): # unsigned - for shift
comb += self.imm_out.data.eq(self.dec.sh)
comb += self.imm_out.ok.eq(1)
- with m.Case(In2Sel.CONST_SH32):
+ with m.Case(In2Sel.CONST_SH32): # unsigned - for shift
comb += self.imm_out.data.eq(self.dec.SH32)
comb += self.imm_out.ok.eq(1)
- # decode SPR2 based on instruction type
- op = self.dec.op
- # BCREG implicitly uses LR or TAR for 2nd reg
- # CTR however is already in fast_spr1 *not* 2.
- with m.If(op.internal_op == MicrOp.OP_BCREG):
- xo9 = self.dec.FormXL.XO[9] # 3.0B p38 top bit of XO
- xo5 = self.dec.FormXL.XO[5] # 3.0B p38
- with m.If(~xo9):
- comb += self.fast_out.data.eq(FastRegs.LR)
- comb += self.fast_out.ok.eq(1)
- with m.Elif(xo5):
- comb += self.fast_out.data.eq(FastRegs.TAR)
- comb += self.fast_out.ok.eq(1)
-
return m
def __init__(self, dec):
self.dec = dec
+ self.sv_rm = SVP64Rec() # SVP64 RM field
self.sel_in = Signal(In3Sel, reset_less=True)
self.insn_in = Signal(32, reset_less=True)
- self.reg_out = Data(5, "reg_c")
+ self.reg_out = Data(7, "reg_c")
+ self.reg_isvec = Signal(1, name="reg_c_isvec") # TODO: in reg_out
def elaborate(self, platform):
m = Module()
comb = m.d.comb
+ op = self.dec.op
+ m.submodules.svdec = svdec = SVP64RegExtra()
+
+ # get the 5-bit reg data before svp64-munging it into 7-bit plus isvec
+ reg = Signal(5, reset_less=True)
# select Register C field
with m.Switch(self.sel_in):
with m.Case(In3Sel.RB):
# for M-Form shiftrot
- comb += self.reg_out.data.eq(self.dec.RB)
+ comb += reg.eq(self.dec.RB)
comb += self.reg_out.ok.eq(1)
with m.Case(In3Sel.RS):
- comb += self.reg_out.data.eq(self.dec.RS)
+ comb += reg.eq(self.dec.RS)
comb += self.reg_out.ok.eq(1)
+ # now do the SVP64 munging. different from DecodeA only by sv_in3
+
+ extra = self.sv_rm.extra # SVP64 extra bits 10:18
+ comb += svdec.extra.eq(extra) # EXTRA field of SVP64 RM
+ comb += svdec.etype.eq(op.SV_Etype) # EXTRA2/3 for this insn
+ comb += svdec.idx.eq(op.sv_in3) # SVP64 reg #3 (matches in3_sel)
+ comb += svdec.reg_in.eq(reg) # 5-bit (RA, RS)
+
+ # outputs: 7-bit reg number and whether it's vectorised
+ comb += self.reg_out.data.eq(svdec.reg_out)
+ comb += self.reg_isvec.eq(svdec.isvec)
+
return m
def __init__(self, dec):
self.dec = dec
+ self.sv_rm = SVP64Rec() # SVP64 RM field
self.sel_in = Signal(OutSel, reset_less=True)
self.insn_in = Signal(32, reset_less=True)
- self.reg_out = Data(5, "reg_o")
+ self.reg_out = Data(7, "reg_o")
+ self.reg_isvec = Signal(1, name="reg_o_isvec") # TODO: in reg_out
self.spr_out = Data(SPR, "spr_o")
self.fast_out = Data(3, "fast_o")
comb = m.d.comb
m.submodules.sprmap = sprmap = SPRMap()
op = self.dec.op
+ m.submodules.svdec = svdec = SVP64RegExtra()
+
+ # get the 5-bit reg data before svp64-munging it into 7-bit plus isvec
+ reg = Signal(5, reset_less=True)
# select Register out field
with m.Switch(self.sel_in):
with m.Case(OutSel.RT):
- comb += self.reg_out.data.eq(self.dec.RT)
+ comb += reg.eq(self.dec.RT)
comb += self.reg_out.ok.eq(1)
with m.Case(OutSel.RA):
- comb += self.reg_out.data.eq(self.dec.RA)
+ comb += reg.eq(self.dec.RA)
comb += self.reg_out.ok.eq(1)
with m.Case(OutSel.SPR):
spr = Signal(10, reset_less=True)
comb += spr.eq(decode_spr_num(self.dec.SPR)) # from XFX
- # TODO MTSPR 1st spr (fast)
+ # MFSPR move to SPRs - needs mapping
with m.If(op.internal_op == MicrOp.OP_MTSPR):
- with m.Switch(spr):
- # fast SPRs
- with m.Case(SPR.CTR.value):
- comb += self.fast_out.data.eq(FastRegs.CTR)
- comb += self.fast_out.ok.eq(1)
- with m.Case(SPR.LR.value):
- comb += self.fast_out.data.eq(FastRegs.LR)
- comb += self.fast_out.ok.eq(1)
- with m.Case(SPR.TAR.value):
- comb += self.fast_out.data.eq(FastRegs.TAR)
- comb += self.fast_out.ok.eq(1)
- with m.Case(SPR.SRR0.value):
- comb += self.fast_out.data.eq(FastRegs.SRR0)
- comb += self.fast_out.ok.eq(1)
- with m.Case(SPR.SRR1.value):
- comb += self.fast_out.data.eq(FastRegs.SRR1)
- comb += self.fast_out.ok.eq(1)
- with m.Case(SPR.XER.value):
- pass # do nothing
- # : map to internal SPR numbers
- # XXX TODO: dec and tb not to go through mapping.
- with m.Default():
- comb += sprmap.spr_i.eq(spr)
- comb += self.spr_out.data.eq(sprmap.spr_o)
- comb += self.spr_out.ok.eq(1)
+ comb += sprmap.spr_i.eq(spr)
+ comb += self.spr_out.eq(sprmap.spr_o)
+ comb += self.fast_out.eq(sprmap.fast_o)
+ # now do the SVP64 munging. different from DecodeA only by sv_out
+
+ extra = self.sv_rm.extra # SVP64 extra bits 10:18
+ comb += svdec.extra.eq(extra) # EXTRA field of SVP64 RM
+ comb += svdec.etype.eq(op.SV_Etype) # EXTRA2/3 for this insn
+ comb += svdec.idx.eq(op.sv_out) # SVP64 reg out1 (matches out_sel)
+ comb += svdec.reg_in.eq(reg) # 5-bit (RA, RS)
+
+ # outputs: 7-bit reg number and whether it's vectorised
+ comb += self.reg_out.data.eq(svdec.reg_out)
+ comb += self.reg_isvec.eq(svdec.isvec)
+
+ # determine Fast Reg
with m.Switch(op.internal_op):
# BC or BCREG: implicit register (CTR) NOTE: same in DecodeA
class DecodeOut2(Elaboratable):
"""DecodeOut2 from instruction
- decodes output registers
+ decodes output registers (2nd one). note that RA is *implicit* below,
+ which now causes problems with SVP64
+
+ TODO: SVP64 is a little more complex, here. svp64 allows extending
+ by one more destination by having one more EXTRA field. RA-as-src
+ is not the same as RA-as-dest. limited in that it's the same first
+ 5 bits (from the v3.0B opcode), but still kinda cool. mostly used
+ for operations that have src-as-dest: mostly this is LD/ST-with-update
+ but there are others.
"""
def __init__(self, dec):
self.dec = dec
+ self.sv_rm = SVP64Rec() # SVP64 RM field
self.sel_in = Signal(OutSel, reset_less=True)
self.lk = Signal(reset_less=True)
self.insn_in = Signal(32, reset_less=True)
- self.reg_out = Data(5, "reg_o")
- self.fast_out = Data(3, "fast_o")
+ self.reg_out = Data(7, "reg_o2")
+ #self.reg_isvec = Signal(1, name="reg_o2_isvec") # TODO: in reg_out
+ self.fast_out = Data(3, "fast_o2")
def elaborate(self, platform):
m = Module()
comb = m.d.comb
+ op = self.dec.op
+ #m.submodules.svdec = svdec = SVP64RegExtra()
- # update mode LD/ST uses read-reg A also as an output
- with m.If(self.dec.op.upd == LDSTMode.update):
- comb += self.reg_out.eq(self.dec.RA)
- comb += self.reg_out.ok.eq(1)
+ # get the 5-bit reg data before svp64-munging it into 7-bit plus isvec
+ #reg = Signal(5, reset_less=True)
+
+ if hasattr(self.dec.op, "upd"):
+ # update mode LD/ST uses read-reg A also as an output
+ with m.If(self.dec.op.upd == LDSTMode.update):
+ comb += self.reg_out.data.eq(self.dec.RA)
+ comb += self.reg_out.ok.eq(1)
# B, BC or BCREG: potential implicit register (LR) output
# these give bl, bcl, bclrl, etc.
- op = self.dec.op
with m.Switch(op.internal_op):
# BC* implicit register (LR)
with m.Switch(op.internal_op):
# mulhw, mulhwu, mulhd, mulhdu - these *ignore* OE
- with m.Case(MicrOp.OP_MUL_H64, MicrOp.OP_MUL_H32):
+ # also rotate
+ # XXX ARGH! ignoring OE causes incompatibility with microwatt
+ # http://lists.libre-soc.org/pipermail/libre-soc-dev/2020-August/000302.html
+ with m.Case(MicrOp.OP_MUL_H64, MicrOp.OP_MUL_H32,
+ MicrOp.OP_EXTS, MicrOp.OP_CNTZ,
+ MicrOp.OP_SHL, MicrOp.OP_SHR, MicrOp.OP_RLC,
+ MicrOp.OP_LOAD, MicrOp.OP_STORE,
+ MicrOp.OP_RLCL, MicrOp.OP_RLCR,
+ MicrOp.OP_EXTSWSLI):
pass
# all other ops decode OE field
def __init__(self, dec):
self.dec = dec
+ self.sv_rm = SVP64Rec() # SVP64 RM field
self.sel_in = Signal(CRInSel, reset_less=True)
self.insn_in = Signal(32, reset_less=True)
self.cr_bitfield = Data(3, "cr_bitfield")
self.cr_bitfield_b = Data(3, "cr_bitfield_b")
self.cr_bitfield_o = Data(3, "cr_bitfield_o")
- self.whole_reg = Signal(reset_less=True)
+ self.whole_reg = Data(8, "cr_fxm")
def elaborate(self, platform):
m = Module()
+ m.submodules.ppick = ppick = PriorityPicker(8, reverse_i=True,
+ reverse_o=True)
+
comb = m.d.comb
+ op = self.dec.op
comb += self.cr_bitfield.ok.eq(0)
comb += self.cr_bitfield_b.ok.eq(0)
- comb += self.whole_reg.eq(0)
+ comb += self.whole_reg.ok.eq(0)
with m.Switch(self.sel_in):
with m.Case(CRInSel.NONE):
pass # No bitfield activated
with m.Case(CRInSel.CR0):
- comb += self.cr_bitfield.data.eq(0)
+ comb += self.cr_bitfield.data.eq(0) # CR0 (MSB0 numbering)
comb += self.cr_bitfield.ok.eq(1)
with m.Case(CRInSel.BI):
comb += self.cr_bitfield.data.eq(self.dec.BI[2:5])
comb += self.cr_bitfield.data.eq(self.dec.BC[2:5])
comb += self.cr_bitfield.ok.eq(1)
with m.Case(CRInSel.WHOLE_REG):
- comb += self.whole_reg.eq(1)
+ comb += self.whole_reg.ok.eq(1)
+ move_one = Signal(reset_less=True)
+ comb += move_one.eq(self.insn_in[20]) # MSB0 bit 11
+ with m.If((op.internal_op == MicrOp.OP_MFCR) & move_one):
+ # must one-hot the FXM field
+ comb += ppick.i.eq(self.dec.FXM)
+ comb += self.whole_reg.data.eq(ppick.o)
+ with m.Else():
+ # otherwise use all of it
+ comb += self.whole_reg.data.eq(0xff)
return m
def __init__(self, dec):
self.dec = dec
+ self.sv_rm = SVP64Rec() # SVP64 RM field
self.rc_in = Signal(reset_less=True)
self.sel_in = Signal(CROutSel, reset_less=True)
self.insn_in = Signal(32, reset_less=True)
self.cr_bitfield = Data(3, "cr_bitfield")
- self.whole_reg = Signal(reset_less=True)
+ self.whole_reg = Data(8, "cr_fxm")
def elaborate(self, platform):
m = Module()
comb = m.d.comb
+ op = self.dec.op
+ m.submodules.ppick = ppick = PriorityPicker(8, reverse_i=True,
+ reverse_o=True)
comb += self.cr_bitfield.ok.eq(0)
- comb += self.whole_reg.eq(0)
+ comb += self.whole_reg.ok.eq(0)
with m.Switch(self.sel_in):
with m.Case(CROutSel.NONE):
pass # No bitfield activated
with m.Case(CROutSel.CR0):
- comb += self.cr_bitfield.data.eq(0)
+ comb += self.cr_bitfield.data.eq(0) # CR0 (MSB0 numbering)
comb += self.cr_bitfield.ok.eq(self.rc_in) # only when RC=1
with m.Case(CROutSel.BF):
comb += self.cr_bitfield.data.eq(self.dec.FormX.BF)
comb += self.cr_bitfield.data.eq(self.dec.FormXL.BT[2:5])
comb += self.cr_bitfield.ok.eq(1)
with m.Case(CROutSel.WHOLE_REG):
- comb += self.whole_reg.eq(1)
+ comb += self.whole_reg.ok.eq(1)
+ move_one = Signal(reset_less=True)
+ comb += move_one.eq(self.insn_in[20])
+ with m.If((op.internal_op == MicrOp.OP_MTCRF)):
+ with m.If(move_one):
+ # must one-hot the FXM field
+ comb += ppick.i.eq(self.dec.FXM)
+ with m.If(ppick.en_o):
+ comb += self.whole_reg.data.eq(ppick.o)
+ with m.Else():
+ comb += self.whole_reg.data.eq(0b00000001) # CR7
+ with m.Else():
+ comb += self.whole_reg.data.eq(self.dec.FXM)
+ with m.Else():
+ # otherwise use all of it
+ comb += self.whole_reg.data.eq(0xff)
return m
+# dictionary of Input Record field names that, if they exist,
+# will need a corresponding CSV Decoder file column (actually, PowerOp)
+# to be decoded (this includes the single bit names)
+record_names = {'insn_type': 'internal_op',
+ 'fn_unit': 'function_unit',
+ 'rc': 'rc_sel',
+ 'oe': 'rc_sel',
+ 'zero_a': 'in1_sel',
+ 'imm_data': 'in2_sel',
+ 'invert_in': 'inv_a',
+ 'invert_out': 'inv_out',
+ 'rc': 'cr_out',
+ 'oe': 'cr_in',
+ 'output_carry': 'cry_out',
+ 'input_carry': 'cry_in',
+ 'is_32bit': 'is_32b',
+ 'is_signed': 'sgn',
+ 'lk': 'lk',
+ 'data_len': 'ldst_len',
+ 'byte_reverse': 'br',
+ 'sign_extend': 'sgn_ext',
+ 'ldst_mode': 'upd',
+ }
+
+
+class PowerDecodeSubset(Elaboratable):
+ """PowerDecodeSubset: dynamic subset decoder
+
+ only fields actually requested are copied over. hence, "subset" (duh).
+ """
+ def __init__(self, dec, opkls=None, fn_name=None, final=False, state=None):
+
+ self.sv_rm = SVP64Rec(name="dec_svp64") # SVP64 RM field
+ self.final = final
+ self.opkls = opkls
+ self.fn_name = fn_name
+ if opkls is None:
+ opkls = Decode2ToOperand
+ self.do = opkls(fn_name)
+ col_subset = self.get_col_subset(self.do)
+
+ # only needed for "main" PowerDecode2
+ if not self.final:
+ self.e = Decode2ToExecute1Type(name=self.fn_name, do=self.do)
+
+ # create decoder if one not already given
+ if dec is None:
+ dec = create_pdecode(name=fn_name, col_subset=col_subset,
+ row_subset=self.rowsubsetfn)
+ self.dec = dec
+
+ # state information needed by the Decoder
+ if state is None:
+ state = CoreState("dec2")
+ self.state = state
+
+ def get_col_subset(self, do):
+ subset = {'cr_in', 'cr_out', 'rc_sel'} # needed, non-optional
+ for k, v in record_names.items():
+ if hasattr(do, k):
+ subset.add(v)
+ print ("get_col_subset", self.fn_name, do.fields, subset)
+ return subset
-class PowerDecode2(Elaboratable):
+ def rowsubsetfn(self, opcode, row):
+ return row['unit'] == self.fn_name
+
+ def ports(self):
+ return self.dec.ports() + self.e.ports() + self.sv_rm.ports()
+
+ def needs_field(self, field, op_field):
+ if self.final:
+ do = self.do
+ else:
+ do = self.e_tmp.do
+ return hasattr(do, field) and self.op_get(op_field) is not None
+
+ def do_copy(self, field, val, final=False):
+ if final or self.final:
+ do = self.do
+ else:
+ do = self.e_tmp.do
+ if hasattr(do, field) and val is not None:
+ return getattr(do, field).eq(val)
+ return []
+
+ def op_get(self, op_field):
+ return getattr(self.dec.op, op_field, None)
+
+ def elaborate(self, platform):
+ m = Module()
+ comb = m.d.comb
+ state = self.state
+ op, do = self.dec.op, self.do
+ msr, cia = state.msr, state.pc
+
+ # fill in for a normal instruction (not an exception)
+ # copy over if non-exception, non-privileged etc. is detected
+ if not self.final:
+ if self.fn_name is None:
+ name = "tmp"
+ else:
+ name = self.fn_name + "tmp"
+ self.e_tmp = Decode2ToExecute1Type(name=name, opkls=self.opkls)
+
+ # set up submodule decoders
+ m.submodules.dec = self.dec
+ m.submodules.dec_rc = dec_rc = DecodeRC(self.dec)
+ m.submodules.dec_oe = dec_oe = DecodeOE(self.dec)
+ m.submodules.dec_cr_in = self.dec_cr_in = DecodeCRIn(self.dec)
+ m.submodules.dec_cr_out = self.dec_cr_out = DecodeCROut(self.dec)
+
+ # copy instruction through...
+ for i in [do.insn,
+ dec_rc.insn_in, dec_oe.insn_in,
+ self.dec_cr_in.insn_in, self.dec_cr_out.insn_in]:
+ comb += i.eq(self.dec.opcode_in)
+
+ # ...and subdecoders' input fields
+ comb += dec_rc.sel_in.eq(op.rc_sel)
+ comb += dec_oe.sel_in.eq(op.rc_sel) # XXX should be OE sel
+ comb += self.dec_cr_in.sel_in.eq(op.cr_in)
+ comb += self.dec_cr_in.sv_rm.eq(self.sv_rm)
+ comb += self.dec_cr_out.sv_rm.eq(self.sv_rm)
+ comb += self.dec_cr_out.sel_in.eq(op.cr_out)
+ comb += self.dec_cr_out.rc_in.eq(dec_rc.rc_out.data)
+
+ # copy "state" over
+ comb += self.do_copy("msr", msr)
+ comb += self.do_copy("cia", cia)
+
+ # set up instruction type
+ # no op: defaults to OP_ILLEGAL
+ comb += self.do_copy("insn_type", self.op_get("internal_op"))
+
+ # function unit for decoded instruction: requires minor redirect
+ # for SPR set/get
+ fn = self.op_get("function_unit")
+ spr = Signal(10, reset_less=True)
+ comb += spr.eq(decode_spr_num(self.dec.SPR)) # from XFX
+
+ # for first test only forward SPRs 18 and 19 to MMU, when
+ # operation is MTSPR or MFSPR. TODO: add other MMU SPRs
+ with m.If(((self.dec.op.internal_op == MicrOp.OP_MTSPR) |
+ (self.dec.op.internal_op == MicrOp.OP_MFSPR)) &
+ ((spr == SPR.DSISR) | (spr == SPR.DAR))):
+ comb += self.do_copy("fn_unit", Function.MMU)
+ with m.Else():
+ comb += self.do_copy("fn_unit",fn)
+
+ # immediates
+ if self.needs_field("zero_a", "in1_sel"):
+ m.submodules.dec_ai = dec_ai = DecodeAImm(self.dec)
+ comb += dec_ai.sel_in.eq(op.in1_sel)
+ comb += self.do_copy("zero_a", dec_ai.immz_out) # RA==0 detected
+ if self.needs_field("imm_data", "in2_sel"):
+ m.submodules.dec_bi = dec_bi = DecodeBImm(self.dec)
+ comb += dec_bi.sel_in.eq(op.in2_sel)
+ comb += self.do_copy("imm_data", dec_bi.imm_out) # imm in RB
+
+ # rc and oe out
+ comb += self.do_copy("rc", dec_rc.rc_out)
+ comb += self.do_copy("oe", dec_oe.oe_out)
+
+ # CR in/out
+ comb += self.do_copy("read_cr_whole", self.dec_cr_in.whole_reg)
+ comb += self.do_copy("write_cr_whole", self.dec_cr_out.whole_reg)
+ comb += self.do_copy("write_cr0", self.dec_cr_out.cr_bitfield.ok)
+
+ comb += self.do_copy("input_cr", self.op_get("cr_in")) # CR in
+ comb += self.do_copy("output_cr", self.op_get("cr_out")) # CR out
+
+ # decoded/selected instruction flags
+ comb += self.do_copy("data_len", self.op_get("ldst_len"))
+ comb += self.do_copy("invert_in", self.op_get("inv_a"))
+ comb += self.do_copy("invert_out", self.op_get("inv_out"))
+ comb += self.do_copy("input_carry", self.op_get("cry_in"))
+ comb += self.do_copy("output_carry", self.op_get("cry_out"))
+ comb += self.do_copy("is_32bit", self.op_get("is_32b"))
+ comb += self.do_copy("is_signed", self.op_get("sgn"))
+ lk = self.op_get("lk")
+ if lk is not None:
+ with m.If(lk):
+ comb += self.do_copy("lk", self.dec.LK) # XXX TODO: accessor
+
+ comb += self.do_copy("byte_reverse", self.op_get("br"))
+ comb += self.do_copy("sign_extend", self.op_get("sgn_ext"))
+ comb += self.do_copy("ldst_mode", self.op_get("upd")) # LD/ST mode
+
+ return m
+
+
+class PowerDecode2(PowerDecodeSubset):
"""PowerDecode2: the main instruction decoder.
whilst PowerDecode is responsible for decoding the actual opcode, this
instructions are illegal (or privileged) or not, and instead of
just leaving at that, *replacing* the instruction to execute with
a suitable alternative (trap).
- """
- def __init__(self, dec):
+ LDSTExceptions are done the cycle _after_ they're detected (after
+ they come out of LDSTCompUnit). basically despite the instruction
+ being decoded, the results of the decode are completely ignored
+ and "exception.happened" used to set the "actual" instruction to
+ "OP_TRAP". the LDSTException data structure gets filled in,
+ in the CompTrapOpSubset and that's what it fills in SRR.
- self.dec = dec
- self.e = Decode2ToExecute1Type()
- self.valid = Signal() # sync signal
-
- # state information needed by the Decoder (TODO: this as a Record)
- self.msr = Signal(64, reset_less=True) # copy of MSR
- self.cia = Signal(64, reset_less=True) # copy of Program Counter
+ to make this work, TestIssuer must notice "exception.happened"
+ after the (failed) LD/ST and copies the LDSTException info from
+ the output, into here (PowerDecoder2). without incrementing PC.
+ """
- def ports(self):
- return self.dec.ports() + self.e.ports()
+ def __init__(self, dec, opkls=None, fn_name=None, final=False, state=None):
+ super().__init__(dec, opkls, fn_name, final, state)
+ self.exc = LDSTException("dec2_exc")
+
+ def get_col_subset(self, opkls):
+ subset = super().get_col_subset(opkls)
+ subset.add("asmcode")
+ subset.add("in1_sel")
+ subset.add("in2_sel")
+ subset.add("in3_sel")
+ subset.add("out_sel")
+ subset.add("sv_in1")
+ subset.add("sv_in2")
+ subset.add("sv_in3")
+ subset.add("sv_out")
+ subset.add("SV_Etype")
+ subset.add("SV_Ptype")
+ subset.add("lk")
+ subset.add("internal_op")
+ subset.add("form")
+ return subset
def elaborate(self, platform):
- m = Module()
+ m = super().elaborate(platform)
comb = m.d.comb
- e, op, do, msr, cia = self.e, self.dec.op, self.e.do, self.msr, self.cia
+ state = self.state
+ e_out, op, do_out = self.e, self.dec.op, self.e.do
+ dec_spr, msr, cia, ext_irq = state.dec, state.msr, state.pc, state.eint
+ e = self.e_tmp
+ do = e.do
+
+ # fill in for a normal instruction (not an exception)
+ # copy over if non-exception, non-privileged etc. is detected
# set up submodule decoders
- m.submodules.dec = self.dec
m.submodules.dec_a = dec_a = DecodeA(self.dec)
m.submodules.dec_b = dec_b = DecodeB(self.dec)
m.submodules.dec_c = dec_c = DecodeC(self.dec)
m.submodules.dec_o = dec_o = DecodeOut(self.dec)
m.submodules.dec_o2 = dec_o2 = DecodeOut2(self.dec)
- m.submodules.dec_rc = dec_rc = DecodeRC(self.dec)
- m.submodules.dec_oe = dec_oe = DecodeOE(self.dec)
- m.submodules.dec_cr_in = dec_cr_in = DecodeCRIn(self.dec)
- m.submodules.dec_cr_out = dec_cr_out = DecodeCROut(self.dec)
# copy instruction through...
for i in [do.insn, dec_a.insn_in, dec_b.insn_in,
- dec_c.insn_in, dec_o.insn_in, dec_o2.insn_in, dec_rc.insn_in,
- dec_oe.insn_in, dec_cr_in.insn_in, dec_cr_out.insn_in]:
+ dec_c.insn_in, dec_o.insn_in, dec_o2.insn_in]:
comb += i.eq(self.dec.opcode_in)
+ # ... and svp64 rm
+ for i in [dec_a.insn_in, dec_b.insn_in,
+ dec_c.insn_in, dec_o.insn_in, dec_o2.insn_in]:
+ comb += i.eq(self.sv_rm)
+
# ...and subdecoders' input fields
comb += dec_a.sel_in.eq(op.in1_sel)
comb += dec_b.sel_in.eq(op.in2_sel)
comb += dec_c.sel_in.eq(op.in3_sel)
comb += dec_o.sel_in.eq(op.out_sel)
comb += dec_o2.sel_in.eq(op.out_sel)
- comb += dec_o2.lk.eq(do.lk)
- comb += dec_rc.sel_in.eq(op.rc_sel)
- comb += dec_oe.sel_in.eq(op.rc_sel) # XXX should be OE sel
- comb += dec_cr_in.sel_in.eq(op.cr_in)
- comb += dec_cr_out.sel_in.eq(op.cr_out)
- comb += dec_cr_out.rc_in.eq(dec_rc.rc_out.data)
-
- # copy "state" over
- comb += do.msr.eq(self.msr)
- comb += do.cia.eq(self.cia)
-
- # set up instruction, pick fn unit
- # no op: defaults to OP_ILLEGAL
- comb += do.insn_type.eq(op.internal_op)
- comb += do.fn_unit.eq(op.function_unit)
+ if hasattr(do, "lk"):
+ comb += dec_o2.lk.eq(do.lk)
# registers a, b, c and out and out2 (LD/ST EA)
- comb += e.read_reg1.eq(dec_a.reg_out)
- comb += e.read_reg2.eq(dec_b.reg_out)
- comb += e.read_reg3.eq(dec_c.reg_out)
- comb += e.write_reg.eq(dec_o.reg_out)
- comb += e.write_ea.eq(dec_o2.reg_out)
- comb += do.imm_data.eq(dec_b.imm_out) # immediate in RB (usually)
- comb += do.zero_a.eq(dec_a.immz_out) # RA==0 detected
-
- # rc and oe out
- comb += do.rc.eq(dec_rc.rc_out)
- comb += do.oe.eq(dec_oe.oe_out)
+ for to_reg, fromreg in (
+ (e.read_reg1, dec_a.reg_out),
+ (e.read_reg2, dec_b.reg_out),
+ (e.read_reg3, dec_c.reg_out),
+ (e.write_reg, dec_o.reg_out),
+ (e.write_ea, dec_o2.reg_out)):
+ comb += to_reg.data.eq(fromreg.data)
+ comb += to_reg.ok.eq(fromreg.ok)
# SPRs out
comb += e.read_spr1.eq(dec_a.spr_out)
comb += e.write_fast2.eq(dec_o2.fast_out)
# condition registers (CR)
- comb += e.read_cr1.eq(dec_cr_in.cr_bitfield)
- comb += e.read_cr2.eq(dec_cr_in.cr_bitfield_b)
- comb += e.read_cr3.eq(dec_cr_in.cr_bitfield_o)
- comb += e.write_cr.eq(dec_cr_out.cr_bitfield)
-
- comb += do.read_cr_whole.eq(dec_cr_in.whole_reg)
- comb += do.write_cr_whole.eq(dec_cr_out.whole_reg)
- comb += do.write_cr0.eq(dec_cr_out.cr_bitfield.ok)
-
- # decoded/selected instruction flags
- comb += do.data_len.eq(op.ldst_len)
- comb += do.invert_a.eq(op.inv_a)
- comb += do.invert_out.eq(op.inv_out)
- comb += do.input_carry.eq(op.cry_in) # carry comes in
- comb += do.output_carry.eq(op.cry_out) # carry goes out
- comb += do.is_32bit.eq(op.is_32b)
- comb += do.is_signed.eq(op.sgn)
- with m.If(op.lk):
- comb += do.lk.eq(self.dec.LK) # XXX TODO: accessor
-
- comb += do.byte_reverse.eq(op.br)
- comb += do.sign_extend.eq(op.sgn_ext)
- comb += do.ldst_mode.eq(op.upd) # LD/ST mode (update, cache-inhibit)
-
- # These should be removed eventually
- comb += do.input_cr.eq(op.cr_in) # condition reg comes in
- comb += do.output_cr.eq(op.cr_out) # condition reg goes in
+ comb += e.read_cr1.eq(self.dec_cr_in.cr_bitfield)
+ comb += e.read_cr2.eq(self.dec_cr_in.cr_bitfield_b)
+ comb += e.read_cr3.eq(self.dec_cr_in.cr_bitfield_o)
+ comb += e.write_cr.eq(self.dec_cr_out.cr_bitfield)
# sigh this is exactly the sort of thing for which the
# decoder is designed to not need. MTSPR, MFSPR and others need
# access to the XER bits. however setting e.oe is not appropriate
with m.If(op.internal_op == MicrOp.OP_MFSPR):
- comb += e.xer_in.eq(1)
+ comb += e.xer_in.eq(0b111) # SO, CA, OV
+ with m.If(op.internal_op == MicrOp.OP_CMP):
+ comb += e.xer_in.eq(1<<XERRegs.SO) # SO
with m.If(op.internal_op == MicrOp.OP_MTSPR):
comb += e.xer_out.eq(1)
# set the trapaddr to 0x700 for a td/tw/tdi/twi operation
with m.If(op.internal_op == MicrOp.OP_TRAP):
# *DO NOT* call self.trap here. that would reset absolutely
- # rverything including destroying read of RA and RB.
- comb += do.trapaddr.eq(0x70) # addr=0x700 (strip first nibble)
-
- # TODO: get msr, then can do privileged instruction
- with m.If(instr_is_priv(m, op.internal_op, e.do.insn) & msr[MSR.PR]):
- # privileged instruction trap
+ # everything including destroying read of RA and RB.
+ comb += self.do_copy("trapaddr", 0x70) # strip first nibble
+
+ ####################
+ # ok so the instruction's been decoded, blah blah, however
+ # now we need to determine if it's actually going to go ahead...
+ # *or* if in fact it's a privileged operation, whether there's
+ # an external interrupt, etc. etc. this is a simple priority
+ # if-elif-elif sequence. decrement takes highest priority,
+ # EINT next highest, privileged operation third.
+
+ # check if instruction is privileged
+ is_priv_insn = instr_is_priv(m, op.internal_op, e.do.insn)
+
+ # different IRQ conditions
+ ext_irq_ok = Signal()
+ dec_irq_ok = Signal()
+ priv_ok = Signal()
+ illeg_ok = Signal()
+ exc = self.exc
+
+ comb += ext_irq_ok.eq(ext_irq & msr[MSR.EE]) # v3.0B p944 (MSR.EE)
+ comb += dec_irq_ok.eq(dec_spr[63] & msr[MSR.EE]) # 6.5.11 p1076
+ comb += priv_ok.eq(is_priv_insn & msr[MSR.PR])
+ comb += illeg_ok.eq(op.internal_op == MicrOp.OP_ILLEGAL)
+
+ # LD/ST exceptions. TestIssuer copies the exception info at us
+ # after a failed LD/ST.
+ with m.If(exc.happened):
+ with m.If(exc.alignment):
+ self.trap(m, TT.PRIV, 0x600)
+ with m.Elif(exc.instr_fault):
+ with m.If(exc.segment_fault):
+ self.trap(m, TT.PRIV, 0x480)
+ with m.Else():
+ # pass exception info to trap to create SRR1
+ self.trap(m, TT.MEMEXC, 0x400, exc)
+ with m.Else():
+ with m.If(exc.segment_fault):
+ self.trap(m, TT.PRIV, 0x380)
+ with m.Else():
+ self.trap(m, TT.PRIV, 0x300)
+
+ # decrement counter (v3.0B p1099): TODO 32-bit version (MSR.LPCR)
+ with m.Elif(dec_irq_ok):
+ self.trap(m, TT.DEC, 0x900) # v3.0B 6.5 p1065
+
+ # external interrupt? only if MSR.EE set
+ with m.Elif(ext_irq_ok):
+ self.trap(m, TT.EINT, 0x500)
+
+ # privileged instruction trap
+ with m.Elif(priv_ok):
self.trap(m, TT.PRIV, 0x700)
# illegal instruction must redirect to trap. this is done by
# *overwriting* the decoded instruction and starting again.
# (note: the same goes for interrupts and for privileged operations,
# just with different trapaddr and traptype)
- with m.Elif(op.internal_op == MicrOp.OP_ILLEGAL):
+ with m.Elif(illeg_ok):
# illegal instruction trap
self.trap(m, TT.ILLEG, 0x700)
+ # no exception, just copy things to the output
+ with m.Else():
+ comb += e_out.eq(e)
+
+ ####################
+ # follow-up after trap/irq to set up SRR0/1
+
# trap: (note e.insn_type so this includes OP_ILLEGAL) set up fast regs
# Note: OP_SC could actually be modified to just be a trap
- with m.If((do.insn_type == MicrOp.OP_TRAP) |
- (do.insn_type == MicrOp.OP_SC)):
+ with m.If((do_out.insn_type == MicrOp.OP_TRAP) |
+ (do_out.insn_type == MicrOp.OP_SC)):
# TRAP write fast1 = SRR0
- comb += e.write_fast1.data.eq(FastRegs.SRR0) # constant: SRR0
- comb += e.write_fast1.ok.eq(1)
+ comb += e_out.write_fast1.data.eq(FastRegs.SRR0) # constant: SRR0
+ comb += e_out.write_fast1.ok.eq(1)
# TRAP write fast2 = SRR1
- comb += e.write_fast2.data.eq(FastRegs.SRR1) # constant: SRR1
- comb += e.write_fast2.ok.eq(1)
+ comb += e_out.write_fast2.data.eq(FastRegs.SRR1) # constant: SRR1
+ comb += e_out.write_fast2.ok.eq(1)
# RFID: needs to read SRR0/1
- with m.If(do.insn_type == MicrOp.OP_RFID):
+ with m.If(do_out.insn_type == MicrOp.OP_RFID):
# TRAP read fast1 = SRR0
- comb += e.read_fast1.data.eq(FastRegs.SRR0) # constant: SRR0
- comb += e.read_fast1.ok.eq(1)
+ comb += e_out.read_fast1.data.eq(FastRegs.SRR0) # constant: SRR0
+ comb += e_out.read_fast1.ok.eq(1)
# TRAP read fast2 = SRR1
- comb += e.read_fast2.data.eq(FastRegs.SRR1) # constant: SRR1
- comb += e.read_fast2.ok.eq(1)
+ comb += e_out.read_fast2.data.eq(FastRegs.SRR1) # constant: SRR1
+ comb += e_out.read_fast2.ok.eq(1)
+
+ # annoying simulator bug
+ if hasattr(e_out, "asmcode") and hasattr(self.dec.op, "asmcode"):
+ comb += e_out.asmcode.eq(self.dec.op.asmcode)
return m
- def trap(self, m, traptype, trapaddr):
+ def trap(self, m, traptype, trapaddr, exc=None):
"""trap: this basically "rewrites" the decoded instruction as a trap
"""
comb = m.d.comb
- e, op, do = self.e, self.dec.op, self.e.do
+ op, e = self.dec.op, self.e
comb += e.eq(0) # reset eeeeeverything
- # start again
- comb += do.insn.eq(self.dec.opcode_in)
- comb += do.insn_type.eq(MicrOp.OP_TRAP)
- comb += do.fn_unit.eq(Function.TRAP)
- comb += do.trapaddr.eq(trapaddr >> 4) # cut bottom 4 bits
- comb += do.traptype.eq(traptype) # request type
- comb += do.msr.eq(self.msr) # copy of MSR "state"
- comb += do.cia.eq(self.cia) # copy of PC "state"
-
- def regspecmap_read(self, regfile, regname):
- """regspecmap_read: provides PowerDecode2 with an encoding relationship
- to Function Unit port regfiles (read-enable, read regnum, write regnum)
- regfile and regname arguments are fields 1 and 2 from a given regspec.
- """
- return regspec_decode_read(self.e, regfile, regname)
- def regspecmap_write(self, regfile, regname):
- """regspecmap_write: provides PowerDecode2 with an encoding relationship
- to Function Unit port regfiles (write port, write regnum)
- regfile and regname arguments are fields 1 and 2 from a given regspec.
- """
- return regspec_decode_write(self.e, regfile, regname)
-
- def rdflags(self, cu):
- rdl = []
- for idx in range(cu.n_src):
- regfile, regname, _ = cu.get_in_spec(idx)
- rdflag, read = self.regspecmap_read(regfile, regname)
- rdl.append(rdflag)
- print("rdflags", rdl)
- return Cat(*rdl)
+ # start again
+ comb += self.do_copy("insn", self.dec.opcode_in, True)
+ comb += self.do_copy("insn_type", MicrOp.OP_TRAP, True)
+ comb += self.do_copy("fn_unit", Function.TRAP, True)
+ comb += self.do_copy("trapaddr", trapaddr >> 4, True) # bottom 4 bits
+ comb += self.do_copy("traptype", traptype, True) # request type
+ comb += self.do_copy("ldst_exc", exc, True) # request type
+ comb += self.do_copy("msr", self.state.msr, True) # copy of MSR "state"
+ comb += self.do_copy("cia", self.state.pc, True) # copy of PC "state"
+
+
+def get_rdflags(e, cu):
+ rdl = []
+ for idx in range(cu.n_src):
+ regfile, regname, _ = cu.get_in_spec(idx)
+ rdflag, read = regspec_decode_read(e, regfile, regname)
+ rdl.append(rdflag)
+ print("rdflags", rdl)
+ return Cat(*rdl)
if __name__ == '__main__':
projects / soc.git / blobdiff