def __init__(self, dec):
self.dec = dec
- self.sv_rm = SVP64Rec() # SVP64 RM field
self.sel_in = Signal(In1Sel, reset_less=True)
self.insn_in = Signal(32, reset_less=True)
- self.reg_out = Data(7, name="reg_a")
- self.reg_isvec = Signal(1, name="reg_a_isvec") # TODO: in reg_out
+ self.reg_out = Data(5, name="reg_a")
self.spr_out = Data(SPR, "spr_a")
self.fast_out = Data(3, "fast_a")
m = Module()
comb = m.d.comb
op = self.dec.op
+ reg = self.reg_out
m.submodules.sprmap = sprmap = SPRMap()
- m.submodules.svdec = svdec = SVP64RegExtra()
-
- # get the 5-bit reg data before svp64-munging it into 7-bit plus isvec
- reg = Signal(5, reset_less=True)
# select Register A field
ra = Signal(5, reset_less=True)
with m.If((self.sel_in == In1Sel.RA) |
((self.sel_in == In1Sel.RA_OR_ZERO) &
(ra != Const(0, 5)))):
- comb += reg.eq(ra)
- comb += self.reg_out.ok.eq(1)
+ comb += reg.data.eq(ra)
+ comb += reg.ok.eq(1)
# some Logic/ALU ops have RS as the 3rd arg, but no "RA".
# moved it to 1st position (in1_sel)... because
rs = Signal(5, reset_less=True)
comb += rs.eq(self.dec.RS)
with m.If(self.sel_in == In1Sel.RS):
- comb += reg.eq(rs)
- comb += self.reg_out.ok.eq(1)
-
- # now do the SVP64 munging. op.SV_Etype and op.sv_in1 comes from
- # PowerDecoder which in turn comes from LDST-RM*.csv and RM-*.csv
- # which in turn were auto-generated by sv_analysis.py
-
- extra = self.sv_rm.extra # SVP64 extra bits 10:18
- comb += svdec.extra.eq(extra) # EXTRA field of SVP64 RM
- comb += svdec.etype.eq(op.SV_Etype) # EXTRA2/3 for this insn
- comb += svdec.idx.eq(op.sv_in1) # SVP64 reg #1 (matches in1_sel)
- comb += svdec.reg_in.eq(reg) # 5-bit (RA, RS)
-
- # outputs: 7-bit reg number and whether it's vectorised
- comb += self.reg_out.data.eq(svdec.reg_out)
- comb += self.reg_isvec.eq(svdec.isvec)
+ comb += reg.data.eq(rs)
+ comb += reg.ok.eq(1)
# decode Fast-SPR based on instruction type
with m.Switch(op.internal_op):
def __init__(self, dec):
self.dec = dec
- self.sv_rm = SVP64Rec() # SVP64 RM field
self.sel_in = Signal(In2Sel, reset_less=True)
self.insn_in = Signal(32, reset_less=True)
self.reg_out = Data(7, "reg_b")
m = Module()
comb = m.d.comb
op = self.dec.op
- m.submodules.svdec = svdec = SVP64RegExtra()
-
- # get the 5-bit reg data before svp64-munging it into 7-bit plus isvec
- reg = Signal(5, reset_less=True)
+ reg = self.reg_out
# select Register B field
with m.Switch(self.sel_in):
with m.Case(In2Sel.RB):
- comb += reg.eq(self.dec.RB)
- comb += self.reg_out.ok.eq(1)
+ comb += reg.data.eq(self.dec.RB)
+ comb += reg.ok.eq(1)
with m.Case(In2Sel.RS):
# for M-Form shiftrot
- comb += reg.eq(self.dec.RS)
- comb += self.reg_out.ok.eq(1)
-
- # now do the SVP64 munging. different from DecodeA only by sv_in2
-
- extra = self.sv_rm.extra # SVP64 extra bits 10:18
- comb += svdec.extra.eq(extra) # EXTRA field of SVP64 RM
- comb += svdec.etype.eq(op.SV_Etype) # EXTRA2/3 for this insn
- comb += svdec.idx.eq(op.sv_in2) # SVP64 reg #2 (matches in2_sel)
- comb += svdec.reg_in.eq(reg) # 5-bit (RA, RS)
-
- # outputs: 7-bit reg number and whether it's vectorised
- comb += self.reg_out.data.eq(svdec.reg_out)
- comb += self.reg_isvec.eq(svdec.isvec)
+ comb += reg.data.eq(self.dec.RS)
+ comb += reg.ok.eq(1)
# decode SPR2 based on instruction type
# BCREG implicitly uses LR or TAR for 2nd reg
def __init__(self, dec):
self.dec = dec
- self.sv_rm = SVP64Rec() # SVP64 RM field
self.sel_in = Signal(In3Sel, reset_less=True)
self.insn_in = Signal(32, reset_less=True)
- self.reg_out = Data(7, "reg_c")
- self.reg_isvec = Signal(1, name="reg_c_isvec") # TODO: in reg_out
+ self.reg_out = Data(5, "reg_c")
def elaborate(self, platform):
m = Module()
comb = m.d.comb
op = self.dec.op
- m.submodules.svdec = svdec = SVP64RegExtra()
-
- # get the 5-bit reg data before svp64-munging it into 7-bit plus isvec
- reg = Signal(5, reset_less=True)
+ reg = self.reg_out
# select Register C field
with m.Switch(self.sel_in):
with m.Case(In3Sel.RB):
# for M-Form shiftrot
- comb += reg.eq(self.dec.RB)
- comb += self.reg_out.ok.eq(1)
+ comb += reg.data.eq(self.dec.RB)
+ comb += reg.ok.eq(1)
with m.Case(In3Sel.RS):
- comb += reg.eq(self.dec.RS)
- comb += self.reg_out.ok.eq(1)
-
- # now do the SVP64 munging. different from DecodeA only by sv_in3
-
- extra = self.sv_rm.extra # SVP64 extra bits 10:18
- comb += svdec.extra.eq(extra) # EXTRA field of SVP64 RM
- comb += svdec.etype.eq(op.SV_Etype) # EXTRA2/3 for this insn
- comb += svdec.idx.eq(op.sv_in3) # SVP64 reg #3 (matches in3_sel)
- comb += svdec.reg_in.eq(reg) # 5-bit (RA, RS)
-
- # outputs: 7-bit reg number and whether it's vectorised
- comb += self.reg_out.data.eq(svdec.reg_out)
- comb += self.reg_isvec.eq(svdec.isvec)
+ comb += reg.data.eq(self.dec.RS)
+ comb += reg.ok.eq(1)
return m
def __init__(self, dec):
self.dec = dec
- self.sv_rm = SVP64Rec() # SVP64 RM field
self.sel_in = Signal(OutSel, reset_less=True)
self.insn_in = Signal(32, reset_less=True)
- self.reg_out = Data(7, "reg_o")
- self.reg_isvec = Signal(1, name="reg_o_isvec") # TODO: in reg_out
+ self.reg_out = Data(5, "reg_o")
self.spr_out = Data(SPR, "spr_o")
self.fast_out = Data(3, "fast_o")
comb = m.d.comb
m.submodules.sprmap = sprmap = SPRMap()
op = self.dec.op
- m.submodules.svdec = svdec = SVP64RegExtra()
-
- # get the 5-bit reg data before svp64-munging it into 7-bit plus isvec
- reg = Signal(5, reset_less=True)
+ reg = self.reg_out
# select Register out field
with m.Switch(self.sel_in):
with m.Case(OutSel.RT):
- comb += reg.eq(self.dec.RT)
- comb += self.reg_out.ok.eq(1)
+ comb += reg.data.eq(self.dec.RT)
+ comb += reg.ok.eq(1)
with m.Case(OutSel.RA):
- comb += reg.eq(self.dec.RA)
- comb += self.reg_out.ok.eq(1)
+ comb += reg.data.eq(self.dec.RA)
+ comb += reg.ok.eq(1)
with m.Case(OutSel.SPR):
spr = Signal(10, reset_less=True)
comb += spr.eq(decode_spr_num(self.dec.SPR)) # from XFX
comb += self.spr_out.eq(sprmap.spr_o)
comb += self.fast_out.eq(sprmap.fast_o)
- # now do the SVP64 munging. different from DecodeA only by sv_out
-
- extra = self.sv_rm.extra # SVP64 extra bits 10:18
- comb += svdec.extra.eq(extra) # EXTRA field of SVP64 RM
- comb += svdec.etype.eq(op.SV_Etype) # EXTRA2/3 for this insn
- comb += svdec.idx.eq(op.sv_out) # SVP64 reg out1 (matches out_sel)
- comb += svdec.reg_in.eq(reg) # 5-bit (RA, RS)
-
- # outputs: 7-bit reg number and whether it's vectorised
- comb += self.reg_out.data.eq(svdec.reg_out)
- comb += self.reg_isvec.eq(svdec.isvec)
-
# determine Fast Reg
with m.Switch(op.internal_op):
def __init__(self, dec):
self.dec = dec
- self.sv_rm = SVP64Rec() # SVP64 RM field
self.sel_in = Signal(OutSel, reset_less=True)
self.lk = Signal(reset_less=True)
self.insn_in = Signal(32, reset_less=True)
- self.reg_out = Data(7, "reg_o2")
- #self.reg_isvec = Signal(1, name="reg_o2_isvec") # TODO: in reg_out
+ self.reg_out = Data(5, "reg_o2")
self.fast_out = Data(3, "fast_o2")
def elaborate(self, platform):
def __init__(self, dec):
self.dec = dec
- self.sv_rm = SVP64Rec() # SVP64 RM field
self.sel_in = Signal(CRInSel, reset_less=True)
self.insn_in = Signal(32, reset_less=True)
self.cr_bitfield = Data(3, "cr_bitfield")
self.cr_bitfield_b = Data(3, "cr_bitfield_b")
self.cr_bitfield_o = Data(3, "cr_bitfield_o")
- self.cr_isvec = Signal(1, name="cr_isvec")
- self.cr_b_isvec = Signal(1, name="cr_b_isvec")
- self.cr_o_isvec = Signal(1, name="cr_o_isvec")
self.whole_reg = Data(8, "cr_fxm")
def elaborate(self, platform):
m = Module()
comb = m.d.comb
op = self.dec.op
- m.submodules.svdec = svdec = SVP64CRExtra()
- m.submodules.svdec_b = svdec_b = SVP64CRExtra()
- m.submodules.svdec_o = svdec_o = SVP64CRExtra()
m.submodules.ppick = ppick = PriorityPicker(8, reverse_i=True,
reverse_o=True)
-
- # get the 3-bit reg data before svp64-munging it into 7-bit plus isvec
- cr_bf = Signal(3, reset_less=True)
- cr_bf_b = Signal(3, reset_less=True)
- cr_bf_o = Signal(3, reset_less=True)
-
- # index selection slightly different due to shared CR field sigh
- cr_a_idx = Signal(SVEXTRA)
- cr_b_idx = Signal(SVEXTRA)
-
# zero-initialisation
comb += self.cr_bitfield.ok.eq(0)
comb += self.cr_bitfield_b.ok.eq(0)
comb += self.cr_bitfield_o.ok.eq(0)
comb += self.whole_reg.ok.eq(0)
- # these change slighly, when decoding BA/BB. really should have
- # their own separate CSV column: sv_cr_in1 and sv_cr_in2, but hey
- comb += cr_a_idx.eq(op.sv_cr_in)
- comb += cr_b_idx.eq(SVEXTRA.NONE)
- with m.If(op.sv_cr_in == SVEXTRA.Idx_1_2.value):
- comb += cr_a_idx.eq(SVEXTRA.Idx1)
- comb += cr_b_idx.eq(SVEXTRA.Idx2)
-
# select the relevant CR bitfields
with m.Switch(self.sel_in):
with m.Case(CRInSel.NONE):
pass # No bitfield activated
with m.Case(CRInSel.CR0):
- comb += cr_bf.eq(0) # CR0 (MSB0 numbering)
+ comb += self.cr_bitfield.data.eq(0) # CR0 (MSB0 numbering)
comb += self.cr_bitfield.ok.eq(1)
with m.Case(CRInSel.BI):
- comb += cr_bf.eq(self.dec.BI[2:5])
+ comb += self.cr_bitfield.data.eq(self.dec.BI[2:5])
comb += self.cr_bitfield.ok.eq(1)
with m.Case(CRInSel.BFA):
- comb += cr_bf.eq(self.dec.FormX.BFA)
+ comb += self.cr_bitfield.data.eq(self.dec.FormX.BFA)
comb += self.cr_bitfield.ok.eq(1)
with m.Case(CRInSel.BA_BB):
- comb += cr_bf.eq(self.dec.BA[2:5])
+ comb += self.cr_bitfield.data.eq(self.dec.BA[2:5])
comb += self.cr_bitfield.ok.eq(1)
- comb += cr_bf_b.eq(self.dec.BB[2:5])
+ comb += self.cr_bitfield_b.data.eq(self.dec.BB[2:5])
comb += self.cr_bitfield_b.ok.eq(1)
- comb += cr_bf_o.eq(self.dec.BT[2:5])
+ comb += self.cr_bitfield_o.data.eq(self.dec.BT[2:5])
comb += self.cr_bitfield_o.ok.eq(1)
with m.Case(CRInSel.BC):
- comb += cr_bf.eq(self.dec.BC[2:5])
+ comb += self.cr_bitfield.data.eq(self.dec.BC[2:5])
comb += self.cr_bitfield.ok.eq(1)
with m.Case(CRInSel.WHOLE_REG):
comb += self.whole_reg.ok.eq(1)
# otherwise use all of it
comb += self.whole_reg.data.eq(0xff)
- # now do the SVP64 munging.
- extra = self.sv_rm.extra # SVP64 extra bits 10:18
-
- comb += svdec.extra.eq(extra) # EXTRA field of SVP64 RM
- comb += svdec.etype.eq(op.SV_Etype) # EXTRA2/3 for this insn
- comb += svdec.cr_in.eq(cr_bf) # 3-bit (BFA)
-
- comb += svdec_b.extra.eq(extra) # EXTRA field of SVP64 RM
- comb += svdec_b.etype.eq(op.SV_Etype) # EXTRA2/3 for this insn
- comb += svdec_b.cr_in.eq(cr_bf_b) # 3-bit (BB[2:5])
-
- comb += svdec_o.extra.eq(extra) # EXTRA field of SVP64 RM
- comb += svdec_o.etype.eq(op.SV_Etype) # EXTRA2/3 for this insn
- comb += svdec_o.cr_in.eq(cr_bf_o) # 3-bit (BT[2:5])
-
- # indices are slightly different, BA/BB mess sorted above
- comb += svdec.idx.eq(cr_a_idx) # SVP64 CR in A
- comb += svdec_b.idx.eq(cr_b_idx) # SVP64 CR in B
- comb += svdec_o.idx.eq(op.sv_cr_out) # SVP64 CR out
-
- # outputs: 7-bit reg number and whether it's vectorised
- comb += self.cr_bitfield.data.eq(svdec.cr_out)
- comb += self.cr_isvec.eq(svdec.isvec)
- comb += self.cr_bitfield_b.data.eq(svdec_b.cr_out)
- comb += self.cr_b_isvec.eq(svdec_b.isvec)
- comb += self.cr_bitfield_o.data.eq(svdec_o.cr_out)
- comb += self.cr_o_isvec.eq(svdec_o.isvec)
-
return m
def __init__(self, dec):
self.dec = dec
- self.sv_rm = SVP64Rec() # SVP64 RM field
self.rc_in = Signal(reset_less=True)
self.sel_in = Signal(CROutSel, reset_less=True)
self.insn_in = Signal(32, reset_less=True)
comb += self.cr_bitfield.ok.eq(0)
comb += self.whole_reg.ok.eq(0)
+
with m.Switch(self.sel_in):
with m.Case(CROutSel.NONE):
pass # No bitfield activated
self.state = state
def get_col_subset(self, do):
- subset = {'sv_cr_in', 'sv_cr_out', 'SV_Etype',
- 'cr_in', 'cr_out', 'rc_sel'} # needed, non-optional
+ subset = { 'cr_in', 'cr_out', 'rc_sel'} # needed, non-optional
for k, v in record_names.items():
if hasattr(do, k):
subset.add(v)
comb += dec_rc.sel_in.eq(op.rc_sel)
comb += dec_oe.sel_in.eq(op.rc_sel) # XXX should be OE sel
comb += self.dec_cr_in.sel_in.eq(op.cr_in)
- comb += self.dec_cr_in.sv_rm.eq(self.sv_rm)
- comb += self.dec_cr_out.sv_rm.eq(self.sv_rm)
comb += self.dec_cr_out.sel_in.eq(op.cr_out)
comb += self.dec_cr_out.rc_in.eq(dec_rc.rc_out.data)
super().__init__(dec, opkls, fn_name, final, state)
self.exc = LDSTException("dec2_exc")
+ self.cr_out_isvec = Signal(1, name="cr_out_isvec")
+ self.cr_in_isvec = Signal(1, name="cr_in_isvec")
+ self.cr_in_b_isvec = Signal(1, name="cr_in_b_isvec")
+ self.cr_in_o_isvec = Signal(1, name="cr_in_o_isvec")
+ self.in1_isvec = Signal(1, name="reg_a_isvec")
+ self.in2_isvec = Signal(1, name="reg_b_isvec")
+ self.in3_isvec = Signal(1, name="reg_c_isvec")
+ self.o_isvec = Signal(1, name="reg_o_isvec")
+ self.o2_isvec = Signal(1, name="reg_o2_isvec")
+
def get_col_subset(self, opkls):
subset = super().get_col_subset(opkls)
subset.add("asmcode")
m.submodules.dec_o = dec_o = DecodeOut(self.dec)
m.submodules.dec_o2 = dec_o2 = DecodeOut2(self.dec)
+ # and SVP64 Extra decoders
+ m.submodules.crout_svdec = crout_svdec = SVP64CRExtra()
+ m.submodules.crin_svdec = crin_svdec = SVP64CRExtra()
+ m.submodules.crin_svdec_b = crin_svdec_b = SVP64CRExtra()
+ m.submodules.crin_svdec_o = crin_svdec_o = SVP64CRExtra()
+ m.submodules.in1_svdec = in1_svdec = SVP64RegExtra()
+ m.submodules.in2_svdec = in2_svdec = SVP64RegExtra()
+ m.submodules.in3_svdec = in3_svdec = SVP64RegExtra()
+ m.submodules.o_svdec = o_svdec = SVP64RegExtra()
+ m.submodules.o2_svdec = o2_svdec = SVP64RegExtra()
+
+ # get the 5-bit reg data before svp64-munging it into 7-bit plus isvec
+ reg = Signal(5, reset_less=True)
+
# copy instruction through...
for i in [do.insn, dec_a.insn_in, dec_b.insn_in,
dec_c.insn_in, dec_o.insn_in, dec_o2.insn_in]:
comb += i.eq(self.dec.opcode_in)
- # ... and svp64 rm
- for i in [dec_a.insn_in, dec_b.insn_in,
- dec_c.insn_in, dec_o.insn_in, dec_o2.insn_in]:
- comb += i.eq(self.sv_rm)
+ # now do the SVP64 munging. op.SV_Etype and op.sv_in1 comes from
+ # PowerDecoder which in turn comes from LDST-RM*.csv and RM-*.csv
+ # which in turn were auto-generated by sv_analysis.py
+ extra = self.sv_rm.extra # SVP64 extra bits 10:18
+
+ #######
+ # CR out
+ comb += crout_svdec.idx.eq(op.sv_cr_out) # SVP64 CR out
+ comb += self.cr_out_isvec.eq(crout_svdec.isvec)
+
+ #######
+ # CR in - index selection slightly different due to shared CR field sigh
+ cr_a_idx = Signal(SVEXTRA)
+ cr_b_idx = Signal(SVEXTRA)
+
+ # these change slightly, when decoding BA/BB. really should have
+ # their own separate CSV column: sv_cr_in1 and sv_cr_in2, but hey
+ comb += cr_a_idx.eq(op.sv_cr_in)
+ comb += cr_b_idx.eq(SVEXTRA.NONE)
+ with m.If(op.sv_cr_in == SVEXTRA.Idx_1_2.value):
+ comb += cr_a_idx.eq(SVEXTRA.Idx1)
+ comb += cr_b_idx.eq(SVEXTRA.Idx2)
+
+ comb += self.cr_in_isvec.eq(crin_svdec.isvec)
+ comb += self.cr_in_b_isvec.eq(crin_svdec_b.isvec)
+ comb += self.cr_in_o_isvec.eq(crin_svdec_o.isvec)
+
+ # indices are slightly different, BA/BB mess sorted above
+ comb += crin_svdec.idx.eq(cr_a_idx) # SVP64 CR in A
+ comb += crin_svdec_b.idx.eq(cr_b_idx) # SVP64 CR in B
+ comb += crin_svdec_o.idx.eq(op.sv_cr_out) # SVP64 CR out
# ...and subdecoders' input fields
comb += dec_a.sel_in.eq(op.in1_sel)
comb += dec_o2.lk.eq(do.lk)
# registers a, b, c and out and out2 (LD/ST EA)
- for to_reg, fromreg in (
- (e.read_reg1, dec_a.reg_out),
- (e.read_reg2, dec_b.reg_out),
- (e.read_reg3, dec_c.reg_out),
- (e.write_reg, dec_o.reg_out),
- (e.write_ea, dec_o2.reg_out)):
- comb += to_reg.data.eq(fromreg.data)
+ for to_reg, fromreg, svdec in (
+ (e.read_reg1, dec_a.reg_out, in1_svdec),
+ (e.read_reg2, dec_b.reg_out, in2_svdec),
+ (e.read_reg3, dec_c.reg_out, in3_svdec),
+ (e.write_reg, dec_o.reg_out, o_svdec),
+ (e.write_ea, dec_o2.reg_out, o2_svdec)):
+ comb += svdec.extra.eq(extra) # EXTRA field of SVP64 RM
+ comb += svdec.etype.eq(op.SV_Etype) # EXTRA2/3 for this insn
+ comb += svdec.reg_in.eq(fromreg.data) # 3-bit (CR0/BC/BFA)
+ comb += to_reg.data.eq(svdec.reg_out) # 7-bit output
comb += to_reg.ok.eq(fromreg.ok)
+ comb += in1_svdec.idx.eq(op.sv_in1) # SVP64 reg #1 (matches in1_sel)
+ comb += in2_svdec.idx.eq(op.sv_in2) # SVP64 reg #2 (matches in2_sel)
+ comb += in3_svdec.idx.eq(op.sv_in3) # SVP64 reg #3 (matches in3_sel)
+ comb += o_svdec.idx.eq(op.sv_out) # SVP64 output (matches out_sel)
+ # XXX TODO - work out where this should come from. the problem is
+ # that LD-with-update is implied (computed from "is instruction in
+ # "update mode" rather than specified cleanly as its own CSV column
+ #comb += o2_svdec.idx.eq(op.sv_out) # SVP64 output (implicit)
+
+ comb += self.in1_isvec.eq(in1_svdec.isvec)
+ comb += self.in2_isvec.eq(in2_svdec.isvec)
+ comb += self.in3_isvec.eq(in3_svdec.isvec)
+ comb += self.o_isvec.eq(o_svdec.isvec)
+ comb += self.o2_isvec.eq(o2_svdec.isvec)
+
# SPRs out
comb += e.read_spr1.eq(dec_a.spr_out)
comb += e.write_spr.eq(dec_o.spr_out)
comb += e.write_fast2.eq(dec_o2.fast_out)
# condition registers (CR)
- for to_reg, fromreg in (
- (e.read_cr1, self.dec_cr_in.cr_bitfield),
- (e.read_cr2, self.dec_cr_in.cr_bitfield_b),
- (e.read_cr3, self.dec_cr_in.cr_bitfield_o),
- (e.write_cr, self.dec_cr_out.cr_bitfield)):
- comb += to_reg.data.eq(fromreg.data)
+ for to_reg, fromreg, svdec in (
+ (e.read_cr1, self.dec_cr_in.cr_bitfield, crin_svdec),
+ (e.read_cr2, self.dec_cr_in.cr_bitfield_b, crin_svdec_b),
+ (e.read_cr3, self.dec_cr_in.cr_bitfield_o, crin_svdec_o),
+ (e.write_cr, self.dec_cr_out.cr_bitfield, crout_svdec)):
+ comb += svdec.extra.eq(extra) # EXTRA field of SVP64 RM
+ comb += svdec.etype.eq(op.SV_Etype) # EXTRA2/3 for this insn
+ comb += svdec.cr_in.eq(fromreg.data) # 3-bit (CR0/BC/BFA)
+ comb += to_reg.data.eq(svdec.cr_out) # 7-bit output
comb += to_reg.ok.eq(fromreg.ok)
# sigh this is exactly the sort of thing for which the
projects / soc.git / blobdiff