not in any way intended for production use. this runs a FSM that:
-* reads the Program Counter from FastRegs
+* reads the Program Counter from StateRegs
* reads an instruction from a fixed-size Test Memory
* issues it to the Simple Core
* waits for it to complete
improved.
"""
-from nmigen import Elaboratable, Module, Signal
+from nmigen import (Elaboratable, Module, Signal, ClockSignal, ResetSignal,
+ ClockDomain, DomainRenamer)
from nmigen.cli import rtlil
+from nmigen.cli import main
+import sys
-
+from soc.decoder.power_decoder import create_pdecode
+from soc.decoder.power_decoder2 import PowerDecode2
+from soc.decoder.decode2execute1 import IssuerDecode2ToOperand
from soc.decoder.decode2execute1 import Data
from soc.experiment.testmem import TestMemory # test only for instructions
-from soc.regfile.regfiles import FastRegs
+from soc.regfile.regfiles import StateRegs, FastRegs
from soc.simple.core import NonProductionCore
+from soc.config.test.test_loadstore import TestMemPspec
+from soc.config.ifetch import ConfigFetchUnit
+from soc.decoder.power_enums import MicrOp
+from soc.debug.dmi import CoreDebug, DMIInterface
+from soc.debug.jtag import JTAG
+from soc.config.pinouts import get_pinspecs
+from soc.config.state import CoreState
+from soc.interrupts.xics import XICS_ICP, XICS_ICS
+from soc.bus.simple_gpio import SimpleGPIO
+from soc.clock.select import ClockSelect
+from soc.clock.dummypll import DummyPLL
-class TestIssuer(Elaboratable):
+from nmutil.util import rising_edge
+
+
+class TestIssuerInternal(Elaboratable):
"""TestIssuer - reads instructions from TestMemory and issues them
efficiency and speed is not the main goal here: functional correctness is.
"""
- def __init__(self, addrwid=6, idepth=6):
- # main instruction core
- self.core = core = NonProductionCore(addrwid)
+ def __init__(self, pspec):
+
+ # JTAG interface. add this right at the start because if it's
+ # added it *modifies* the pspec, by adding enable/disable signals
+ # for parts of the rest of the core
+ self.jtag_en = hasattr(pspec, "debug") and pspec.debug == 'jtag'
+ if self.jtag_en:
+ subset = {'uart', 'mtwi', 'eint', 'gpio', 'mspi0', 'mspi1',
+ 'pwm', 'sd0', 'sdr'}
+ self.jtag = JTAG(get_pinspecs(subset=subset))
+ # add signals to pspec to enable/disable icache and dcache
+ # (or data and intstruction wishbone if icache/dcache not included)
+ # https://bugs.libre-soc.org/show_bug.cgi?id=520
+ # TODO: do we actually care if these are not domain-synchronised?
+ # honestly probably not.
+ pspec.wb_icache_en = self.jtag.wb_icache_en
+ pspec.wb_dcache_en = self.jtag.wb_dcache_en
+
+ # add interrupt controller?
+ self.xics = hasattr(pspec, "xics") and pspec.xics == True
+ if self.xics:
+ self.xics_icp = XICS_ICP()
+ self.xics_ics = XICS_ICS()
+ self.int_level_i = self.xics_ics.int_level_i
+
+ # add GPIO peripheral?
+ self.gpio = hasattr(pspec, "gpio") and pspec.gpio == True
+ if self.gpio:
+ self.simple_gpio = SimpleGPIO()
+ self.gpio_o = self.simple_gpio.gpio_o
+
+ # main instruction core25
+ self.core = core = NonProductionCore(pspec)
+
+ # instruction decoder. goes into Trap Record
+ pdecode = create_pdecode()
+ self.cur_state = CoreState("cur") # current state (MSR/PC/EINT)
+ self.pdecode2 = PowerDecode2(pdecode, state=self.cur_state,
+ opkls=IssuerDecode2ToOperand)
# Test Instruction memory
- self.imem = TestMemory(32, idepth)
- self.i_rd = self.imem.rdport
- #self.i_wr = self.imem.write_port() errr...
+ self.imem = ConfigFetchUnit(pspec).fu
+ # one-row cache of instruction read
+ self.iline = Signal(64) # one instruction line
+ self.iprev_adr = Signal(64) # previous address: if different, do read
+
+ # DMI interface
+ self.dbg = CoreDebug()
# instruction go/monitor
- self.go_insn_i = Signal(reset_less=True)
self.pc_o = Signal(64, reset_less=True)
- self.pc_i = Data(64, "pc") # set "ok" to indicate "please change me"
- self.busy_o = core.busy_o
+ self.pc_i = Data(64, "pc_i") # set "ok" to indicate "please change me"
+ self.core_bigendian_i = Signal()
+ self.busy_o = Signal(reset_less=True)
self.memerr_o = Signal(reset_less=True)
- # FAST regfile read /write ports
- self.fast_rd1 = self.core.regs.rf['fast'].r_ports['d_rd1']
- self.fast_wr1 = self.core.regs.rf['fast'].w_ports['d_wr1']
+ # FAST regfile read /write ports for PC, MSR, DEC/TB
+ staterf = self.core.regs.rf['state']
+ self.state_r_pc = staterf.r_ports['cia'] # PC rd
+ self.state_w_pc = staterf.w_ports['d_wr1'] # PC wr
+ self.state_r_msr = staterf.r_ports['msr'] # MSR rd
+
+ # DMI interface access
+ intrf = self.core.regs.rf['int']
+ crrf = self.core.regs.rf['cr']
+ xerrf = self.core.regs.rf['xer']
+ self.int_r = intrf.r_ports['dmi'] # INT read
+ self.cr_r = crrf.r_ports['full_cr_dbg'] # CR read
+ self.xer_r = xerrf.r_ports['full_xer'] # XER read
+
# hack method of keeping an eye on whether branch/trap set the PC
- self.fast_nia = self.core.regs.rf['fast'].w_ports['nia']
- self.fast_nia.wen.name = 'fast_nia_wen'
+ self.state_nia = self.core.regs.rf['state'].w_ports['nia']
+ self.state_nia.wen.name = 'state_nia_wen'
def elaborate(self, platform):
m = Module()
comb, sync = m.d.comb, m.d.sync
- m.submodules.core = core = self.core
+ m.submodules.core = core = DomainRenamer("coresync")(self.core)
m.submodules.imem = imem = self.imem
+ m.submodules.dbg = dbg = self.dbg
+ if self.jtag_en:
+ m.submodules.jtag = jtag = self.jtag
+ # TODO: UART2GDB mux, here, from external pin
+ # see https://bugs.libre-soc.org/show_bug.cgi?id=499
+ sync += dbg.dmi.connect_to(jtag.dmi)
+
+ cur_state = self.cur_state
+
+ # XICS interrupt handler
+ if self.xics:
+ m.submodules.xics_icp = icp = self.xics_icp
+ m.submodules.xics_ics = ics = self.xics_ics
+ comb += icp.ics_i.eq(ics.icp_o) # connect ICS to ICP
+ sync += cur_state.eint.eq(icp.core_irq_o) # connect ICP to core
+
+ # GPIO test peripheral
+ if self.gpio:
+ m.submodules.simple_gpio = simple_gpio = self.simple_gpio
+
+ # connect one GPIO output to ICS bit 15 (like in microwatt soc.vhdl)
+ # XXX causes litex ECP5 test to get wrong idea about input and output
+ # (but works with verilator sim *sigh*)
+ #if self.gpio and self.xics:
+ # comb += self.int_level_i[15].eq(simple_gpio.gpio_o[0])
+
+ # instruction decoder
+ pdecode = create_pdecode()
+ m.submodules.dec2 = pdecode2 = self.pdecode2
+
+ # convenience
+ dmi, d_reg, d_cr, d_xer, = dbg.dmi, dbg.d_gpr, dbg.d_cr, dbg.d_xer
+ intrf = self.core.regs.rf['int']
+
+ # clock delay power-on reset
+ cd_por = ClockDomain(reset_less=True)
+ cd_sync = ClockDomain()
+ core_sync = ClockDomain("coresync")
+ m.domains += cd_por, cd_sync, core_sync
+
+ ti_rst = Signal(reset_less=True)
+ delay = Signal(range(4), reset=3)
+ with m.If(delay != 0):
+ m.d.por += delay.eq(delay - 1)
+ comb += cd_por.clk.eq(ClockSignal())
+
+ # power-on reset delay
+ core_rst = ResetSignal("coresync")
+ comb += ti_rst.eq(delay != 0 | dbg.core_rst_o | ResetSignal())
+ comb += core_rst.eq(ti_rst)
+
+ # busy/halted signals from core
+ comb += self.busy_o.eq(core.busy_o)
+ comb += pdecode2.dec.bigendian.eq(self.core_bigendian_i)
# temporary hack: says "go" immediately for both address gen and ST
l0 = core.l0
ldst = core.fus.fus['ldst0']
- m.d.comb += ldst.ad.go.eq(ldst.ad.rel) # link addr-go direct to rel
- m.d.comb += ldst.st.go.eq(ldst.st.rel) # link store-go direct to rel
+ st_go_edge = rising_edge(m, ldst.st.rel_o)
+ m.d.comb += ldst.ad.go_i.eq(ldst.ad.rel_o) # link addr-go direct to rel
+ m.d.comb += ldst.st.go_i.eq(st_go_edge) # link store-go to rising rel
# PC and instruction from I-Memory
- current_insn = Signal(32) # current fetched instruction (note sync)
- current_pc = Signal(64) # current PC (note it is reset/sync)
pc_changed = Signal() # note write to PC
- comb += self.pc_o.eq(current_pc)
+ comb += self.pc_o.eq(cur_state.pc)
ilatch = Signal(32)
# next instruction (+4 on current)
nia = Signal(64, reset_less=True)
- comb += nia.eq(current_pc + 4)
+ comb += nia.eq(cur_state.pc + 4)
+
+ # read the PC
+ pc = Signal(64, reset_less=True)
+ pc_ok_delay = Signal()
+ sync += pc_ok_delay.eq(~self.pc_i.ok)
+ with m.If(self.pc_i.ok):
+ # incoming override (start from pc_i)
+ comb += pc.eq(self.pc_i.data)
+ with m.Else():
+ # otherwise read StateRegs regfile for PC...
+ comb += self.state_r_pc.ren.eq(1<<StateRegs.PC)
+ # ... but on a 1-clock delay
+ with m.If(pc_ok_delay):
+ comb += pc.eq(self.state_r_pc.data_o)
+
+ # don't write pc every cycle
+ comb += self.state_w_pc.wen.eq(0)
+ comb += self.state_w_pc.data_i.eq(0)
+
+ # don't read msr every cycle
+ comb += self.state_r_msr.ren.eq(0)
+ msr_read = Signal(reset=1)
+
+ # connect up debug signals
+ # TODO comb += core.icache_rst_i.eq(dbg.icache_rst_o)
+ comb += dbg.terminate_i.eq(core.core_terminate_o)
+ comb += dbg.state.pc.eq(pc)
+ #comb += dbg.state.pc.eq(cur_state.pc)
+ comb += dbg.state.msr.eq(cur_state.msr)
# temporaries
- core_busy_o = core.busy_o # core is busy
- core_ivalid_i = core.ivalid_i # instruction is valid
- core_issue_i = core.issue_i # instruction is issued
- core_be_i = core.bigendian_i # bigendian mode
- core_opcode_i = core.raw_opcode_i # raw opcode
+ core_busy_o = core.busy_o # core is busy
+ core_ivalid_i = core.ivalid_i # instruction is valid
+ core_issue_i = core.issue_i # instruction is issued
+ dec_opcode_i = pdecode2.dec.raw_opcode_in # raw opcode
+
+ insn_type = core.e.do.insn_type
# actually use a nmigen FSM for the first time (w00t)
+ # this FSM is perhaps unusual in that it detects conditions
+ # then "holds" information, combinatorially, for the core
+ # (as opposed to using sync - which would be on a clock's delay)
+ # this includes the actual opcode, valid flags and so on.
with m.FSM() as fsm:
# waiting (zzz)
with m.State("IDLE"):
sync += pc_changed.eq(0)
- with m.If(self.go_insn_i):
+ sync += core.e.eq(0)
+ sync += core.raw_insn_i.eq(0)
+ sync += core.bigendian_i.eq(0)
+ with m.If(~dbg.core_stop_o & ~core_rst):
# instruction allowed to go: start by reading the PC
- pc = Signal(64, reset_less=True)
- with m.If(self.pc_i.ok):
- # incoming override (start from pc_i)
- comb += pc.eq(self.pc_i.data)
- with m.Else():
- # otherwise read FastRegs regfile for PC
- comb += self.fast_rd1.ren.eq(1<<FastRegs.PC)
- comb += pc.eq(self.fast_rd1.data_o)
# capture the PC and also drop it into Insn Memory
# we have joined a pair of combinatorial memory
# lookups together. this is Generally Bad.
- comb += self.i_rd.addr.eq(pc[2:]) # ignore last 2 bits
- comb += current_insn.eq(self.i_rd.data)
- sync += current_pc.eq(pc)
- m.next = "INSN_READ" # move to "issue" phase
+ comb += self.imem.a_pc_i.eq(pc)
+ comb += self.imem.a_valid_i.eq(1)
+ comb += self.imem.f_valid_i.eq(1)
+ sync += cur_state.pc.eq(pc)
+
+ # initiate read of MSR. arrives one clock later
+ comb += self.state_r_msr.ren.eq(1<<StateRegs.MSR)
+ sync += msr_read.eq(0)
- # got the instruction: start issue
+ m.next = "INSN_READ" # move to "wait for bus" phase
+ with m.Else():
+ comb += core.core_stopped_i.eq(1)
+ comb += dbg.core_stopped_i.eq(1)
+
+ # dummy pause to find out why simulation is not keeping up
with m.State("INSN_READ"):
- comb += current_insn.eq(self.i_rd.data)
- comb += core_ivalid_i.eq(1) # say instruction is valid
- comb += core_issue_i.eq(1) # and issued (ivalid_i redundant)
- comb += core_be_i.eq(0) # little-endian mode
- comb += core_opcode_i.eq(current_insn) # actual opcode
- sync += ilatch.eq(current_insn)
- m.next = "INSN_ACTIVE" # move to "wait for completion" phase
+ # one cycle later, msr read arrives. valid only once.
+ with m.If(~msr_read):
+ sync += msr_read.eq(1) # yeah don't read it again
+ sync += cur_state.msr.eq(self.state_r_msr.data_o)
+ with m.If(self.imem.f_busy_o): # zzz...
+ # busy: stay in wait-read
+ comb += self.imem.a_valid_i.eq(1)
+ comb += self.imem.f_valid_i.eq(1)
+ with m.Else():
+ # not busy: instruction fetched
+ f_instr_o = self.imem.f_instr_o
+ if f_instr_o.width == 32:
+ insn = f_instr_o
+ else:
+ insn = f_instr_o.word_select(cur_state.pc[2], 32)
+ comb += dec_opcode_i.eq(insn) # actual opcode
+ sync += core.e.eq(pdecode2.e)
+ sync += core.state.eq(cur_state)
+ sync += core.raw_insn_i.eq(dec_opcode_i)
+ sync += core.bigendian_i.eq(self.core_bigendian_i)
+ sync += ilatch.eq(insn) # latch current insn
+ # also drop PC and MSR into decode "state"
+ m.next = "INSN_START" # move to "start"
+
+ # waiting for instruction bus (stays there until not busy)
+ with m.State("INSN_START"):
+ comb += core_ivalid_i.eq(1) # instruction is valid
+ comb += core_issue_i.eq(1) # and issued
+
+ m.next = "INSN_ACTIVE" # move to "wait completion"
# instruction started: must wait till it finishes
with m.State("INSN_ACTIVE"):
- comb += core_ivalid_i.eq(1) # say instruction is valid
- comb += core_opcode_i.eq(ilatch) # actual opcode
- #sync += core_issue_i.eq(0) # issue raises for only one cycle
- with m.If(self.fast_nia.wen):
+ with m.If(insn_type != MicrOp.OP_NOP):
+ comb += core_ivalid_i.eq(1) # instruction is valid
+ with m.If(self.state_nia.wen & (1<<StateRegs.PC)):
sync += pc_changed.eq(1)
with m.If(~core_busy_o): # instruction done!
- #sync += core_ivalid_i.eq(0) # say instruction is invalid
- #sync += core_opcode_i.eq(0) # clear out (no good reason)
# ok here we are not reading the branch unit. TODO
- # this just blithely overwrites whatever pipeline updated
- # the PC
+ # this just blithely overwrites whatever pipeline
+ # updated the PC
with m.If(~pc_changed):
- comb += self.fast_wr1.wen.eq(1<<FastRegs.PC)
- comb += self.fast_wr1.data_i.eq(nia)
+ comb += self.state_w_pc.wen.eq(1<<StateRegs.PC)
+ comb += self.state_w_pc.data_i.eq(nia)
+ sync += core.e.eq(0)
+ sync += core.raw_insn_i.eq(0)
+ sync += core.bigendian_i.eq(0)
m.next = "IDLE" # back to idle
+ # this bit doesn't have to be in the FSM: connect up to read
+ # regfiles on demand from DMI
+ with m.If(d_reg.req): # request for regfile access being made
+ # TODO: error-check this
+ # XXX should this be combinatorial? sync better?
+ if intrf.unary:
+ comb += self.int_r.ren.eq(1<<d_reg.addr)
+ else:
+ comb += self.int_r.addr.eq(d_reg.addr)
+ comb += self.int_r.ren.eq(1)
+ d_reg_delay = Signal()
+ sync += d_reg_delay.eq(d_reg.req)
+ with m.If(d_reg_delay):
+ # data arrives one clock later
+ comb += d_reg.data.eq(self.int_r.data_o)
+ comb += d_reg.ack.eq(1)
+
+ # sigh same thing for CR debug
+ with m.If(d_cr.req): # request for regfile access being made
+ comb += self.cr_r.ren.eq(0b11111111) # enable all
+ d_cr_delay = Signal()
+ sync += d_cr_delay.eq(d_cr.req)
+ with m.If(d_cr_delay):
+ # data arrives one clock later
+ comb += d_cr.data.eq(self.cr_r.data_o)
+ comb += d_cr.ack.eq(1)
+
+ # aaand XER...
+ with m.If(d_xer.req): # request for regfile access being made
+ comb += self.xer_r.ren.eq(0b111111) # enable all
+ d_xer_delay = Signal()
+ sync += d_xer_delay.eq(d_xer.req)
+ with m.If(d_xer_delay):
+ # data arrives one clock later
+ comb += d_xer.data.eq(self.xer_r.data_o)
+ comb += d_xer.ack.eq(1)
+
+ # DEC and TB inc/dec FSM
+ self.tb_dec_fsm(m, cur_state.dec)
+
+ return m
+
+ def tb_dec_fsm(self, m, spr_dec):
+ """tb_dec_fsm
+
+ this is a FSM for updating either dec or tb. it runs alternately
+ DEC, TB, DEC, TB. note that SPR pipeline could have written a new
+ value to DEC, however the regfile has "passthrough" on it so this
+ *should* be ok.
+
+ see v3.0B p1097-1099 for Timeer Resource and p1065 and p1076
+ """
+
+ comb, sync = m.d.comb, m.d.sync
+ fast_rf = self.core.regs.rf['fast']
+ fast_r_dectb = fast_rf.r_ports['issue'] # DEC/TB
+ fast_w_dectb = fast_rf.w_ports['issue'] # DEC/TB
+
+ with m.FSM() as fsm:
+
+ # initiates read of current DEC
+ with m.State("DEC_READ"):
+ comb += fast_r_dectb.addr.eq(FastRegs.DEC)
+ comb += fast_r_dectb.ren.eq(1)
+ m.next = "DEC_WRITE"
+
+ # waits for DEC read to arrive (1 cycle), updates with new value
+ with m.State("DEC_WRITE"):
+ new_dec = Signal(64)
+ # TODO: MSR.LPCR 32-bit decrement mode
+ comb += new_dec.eq(fast_r_dectb.data_o - 1)
+ comb += fast_w_dectb.addr.eq(FastRegs.DEC)
+ comb += fast_w_dectb.wen.eq(1)
+ comb += fast_w_dectb.data_i.eq(new_dec)
+ sync += spr_dec.eq(new_dec) # copy into cur_state for decoder
+ m.next = "TB_READ"
+
+ # initiates read of current TB
+ with m.State("TB_READ"):
+ comb += fast_r_dectb.addr.eq(FastRegs.TB)
+ comb += fast_r_dectb.ren.eq(1)
+ m.next = "TB_WRITE"
+
+ # waits for read TB to arrive, initiates write of current TB
+ with m.State("TB_WRITE"):
+ new_tb = Signal(64)
+ comb += new_tb.eq(fast_r_dectb.data_o + 1)
+ comb += fast_w_dectb.addr.eq(FastRegs.TB)
+ comb += fast_w_dectb.wen.eq(1)
+ comb += fast_w_dectb.data_i.eq(new_tb)
+ m.next = "DEC_READ"
+
return m
def __iter__(self):
yield from self.pc_i.ports()
yield self.pc_o
- yield self.go_insn_i
yield self.memerr_o
yield from self.core.ports()
yield from self.imem.ports()
+ yield self.core_bigendian_i
+ yield self.busy_o
def ports(self):
return list(self)
+ def external_ports(self):
+ ports = self.pc_i.ports()
+ ports += [self.pc_o, self.memerr_o, self.core_bigendian_i, self.busy_o,
+ ]
+
+ if self.jtag_en:
+ ports += list(self.jtag.external_ports())
+ else:
+ # don't add DMI if JTAG is enabled
+ ports += list(self.dbg.dmi.ports())
+
+ ports += list(self.imem.ibus.fields.values())
+ ports += list(self.core.l0.cmpi.lsmem.lsi.slavebus.fields.values())
+
+ if self.xics:
+ ports += list(self.xics_icp.bus.fields.values())
+ ports += list(self.xics_ics.bus.fields.values())
+ ports.append(self.int_level_i)
+
+ if self.gpio:
+ ports += list(self.simple_gpio.bus.fields.values())
+ ports.append(self.gpio_o)
+
+ return ports
+
+ def ports(self):
+ return list(self)
+
+
+class TestIssuer(Elaboratable):
+ def __init__(self, pspec):
+ self.ti = TestIssuerInternal(pspec)
+
+ self.pll = DummyPLL()
+
+ # PLL direct clock or not
+ self.pll_en = hasattr(pspec, "use_pll") and pspec.use_pll
+
+ def elaborate(self, platform):
+ m = Module()
+ comb = m.d.comb
+
+ # TestIssuer runs at direct clock
+ m.submodules.ti = ti = self.ti
+ cd_int = ClockDomain("coresync")
+
+ if self.pll_en:
+ # ClockSelect runs at PLL output internal clock rate
+ m.submodules.pll = pll = self.pll
+
+ # add clock domains from PLL
+ cd_pll = ClockDomain("pllclk")
+ m.domains += cd_pll
+
+ # PLL clock established. has the side-effect of running clklsel
+ # at the PLL's speed (see DomainRenamer("pllclk") above)
+ pllclk = ClockSignal("pllclk")
+ comb += pllclk.eq(pll.clk_pll_o)
+
+ # wire up external 24mhz to PLL
+ comb += pll.clk_24_i.eq(ClockSignal())
+
+ # now wire up ResetSignals. don't mind them being in this domain
+ pll_rst = ResetSignal("pllclk")
+ comb += pll_rst.eq(ResetSignal())
+
+ # internal clock is set to selector clock-out. has the side-effect of
+ # running TestIssuer at this speed (see DomainRenamer("intclk") above)
+ intclk = ClockSignal("coresync")
+ if self.pll_en:
+ comb += intclk.eq(pll.clk_pll_o)
+ else:
+ comb += intclk.eq(ClockSignal())
+
+ return m
+
+ def ports(self):
+ return list(self.ti.ports()) + list(self.pll.ports()) + \
+ [ClockSignal(), ResetSignal()]
+
+ def external_ports(self):
+ ports = self.ti.external_ports()
+ ports.append(ClockSignal())
+ ports.append(ResetSignal())
+ if self.pll_en:
+ ports.append(self.pll.clk_sel_i)
+ ports.append(self.pll.pll_18_o)
+ ports.append(self.pll.clk_lck_o)
+ return ports
+
if __name__ == '__main__':
- dut = TestIssuer()
- vl = rtlil.convert(dut, ports=dut.ports())
- with open("test_issuer.il", "w") as f:
- f.write(vl)
+ units = {'alu': 1, 'cr': 1, 'branch': 1, 'trap': 1, 'logical': 1,
+ 'spr': 1,
+ 'div': 1,
+ 'mul': 1,
+ 'shiftrot': 1
+ }
+ pspec = TestMemPspec(ldst_ifacetype='bare_wb',
+ imem_ifacetype='bare_wb',
+ addr_wid=48,
+ mask_wid=8,
+ reg_wid=64,
+ units=units)
+ dut = TestIssuer(pspec)
+ vl = main(dut, ports=dut.ports(), name="test_issuer")
+ if len(sys.argv) == 1:
+ vl = rtlil.convert(dut, ports=dut.external_ports(), name="test_issuer")
+ with open("test_issuer.il", "w") as f:
+ f.write(vl)
projects / soc.git / blobdiff