+++ /dev/null
-"""MMU
-
-based on Anton Blanchard microwatt mmu.vhdl
-
-"""
-from enum import Enum, unique
-from nmigen import (Module, Signal, Elaboratable, Mux, Cat, Repl, signed,
- ResetSignal)
-from nmigen.cli import main
-from nmigen.iocontrol import RecordObject
-
-# library ieee; use ieee.std_logic_1164.all;
-# use ieee.numeric_std.all;
-
-# library work; use work.common.all;
-
-
-# start from common.vhdl
-# type Loadstore1ToMmuType is record
-# valid : std_ulogic;
-# tlbie : std_ulogic;
-# slbia : std_ulogic;
-# mtspr : std_ulogic;
-# iside : std_ulogic;
-# load : std_ulogic;
-# priv : std_ulogic;
-# sprn : std_ulogic_vector(9 downto 0);
-# addr : std_ulogic_vector(63 downto 0);
-# rs : std_ulogic_vector(63 downto 0);
-# end record;
-class LoadStore1ToMmuType(RecordObject):
- def __init__(self):
- super().__init__()
- self.valid = Signal()
- self.tlbie = Signal()
- self.slbia = Signal()
- self.mtspr = Signal()
- self.iside = Signal()
- self.load = Signal()
- self.priv = Signal()
- self.sprn = Signal(10)
- self.addr = Signal(64)
- self.rs = Signal(64)
-
-# type MmuToLoadstore1Type is record
-# done : std_ulogic;
-# err : std_ulogic;
-# invalid : std_ulogic;
-# badtree : std_ulogic;
-# segerr : std_ulogic;
-# perm_error : std_ulogic;
-# rc_error : std_ulogic;
-# sprval : std_ulogic_vector(63 downto 0);
-# end record;
-class MmuToLoadStore1Type(RecordObject):
- def __init__(self):
- super().__init__()
- self.done = Signal()
- self.err = Signal()
- self.invalid = Signal()
- self.badtree = Signal()
- self.segerr = Signal()
- self.perm_error = Signal()
- self.rc_error = Signal()
- self.sprval = Signal(64)
-
-# type MmuToDcacheType is record
-# valid : std_ulogic;
-# tlbie : std_ulogic;
-# doall : std_ulogic;
-# tlbld : std_ulogic;
-# addr : std_ulogic_vector(63 downto 0);
-# pte : std_ulogic_vector(63 downto 0);
-# end record;
-class MmuToDcacheType(RecordObject):
- def __init__(self):
- super().__init__()
- self.valid = Signal()
- self.tlbie = Signal()
- self.doall = Signal()
- self.tlbld = Signal()
- self.addr = Signal(64)
- self.pte = Signal(64)
-
-# type DcacheToMmuType is record
-# stall : std_ulogic;
-# done : std_ulogic;
-# err : std_ulogic;
-# data : std_ulogic_vector(63 downto 0);
-# end record;
-class DcacheToMmuType(RecordObject):
- def __init__(self):
- super().__init__()
- self.stall = Signal()
- self.done = Signal()
- self.err = Signal()
- self.data = Signal(64)
-
-
-# type MmuToIcacheType is record
-# tlbld : std_ulogic;
-# tlbie : std_ulogic;
-# doall : std_ulogic;
-# addr : std_ulogic_vector(63 downto 0);
-# pte : std_ulogic_vector(63 downto 0);
-# end record;
-class MmuToIcacheType(RecordObject):
- def __init__(self):
- self.tlbld = Signal()
- self.tlbie = Signal()
- self.doall = Signal()
- self.addr = Signal(64)
- self.pte = Signal(64)
-# end from common.vhdl
-
-
-
-
-
-
-# -- Radix MMU
-# -- Supports 4-level trees as in arch 3.0B, but not the
-# -- two-step translation
-# -- for guests under a hypervisor (i.e. there is no gRA -> hRA translation).
-
-# type state_t is
-# (IDLE,
-# DO_TLBIE,
-# TLB_WAIT,
-# PROC_TBL_READ,
-# PROC_TBL_WAIT,
-# SEGMENT_CHECK,
-# RADIX_LOOKUP,
-# RADIX_READ_WAIT,
-# RADIX_LOAD_TLB,
-# RADIX_FINISH
-# );
-
-# architecture behave of mmu is
-
-@unique
-class State(Enum):
- IDLE = 0
- DO_TLBIE = 1
- TLB_WAIT = 2
- PROC_TBL_READ = 3
- PROC_TBL_WAIT = 4
- SEGMENT_CHECK = 5
- RADIX_LOOKUP = 6
- RADIX_READ_WAIT = 7
- RADIX_LOAD_TLB = 8
- RADIX_FINISH = 9
-
-# type reg_stage_t is record
-# -- latched request from loadstore1
-# valid : std_ulogic;
-# iside : std_ulogic;
-# store : std_ulogic;
-# priv : std_ulogic;
-# addr : std_ulogic_vector(63 downto 0);
-# inval_all : std_ulogic;
-# -- config SPRs
-# prtbl : std_ulogic_vector(63 downto 0);
-# pid : std_ulogic_vector(31 downto 0);
-# -- internal state
-# state : state_t;
-# done : std_ulogic;
-# err : std_ulogic;
-# pgtbl0 : std_ulogic_vector(63 downto 0);
-# pt0_valid : std_ulogic;
-# pgtbl3 : std_ulogic_vector(63 downto 0);
-# pt3_valid : std_ulogic;
-# shift : unsigned(5 downto 0);
-# mask_size : unsigned(4 downto 0);
-# pgbase : std_ulogic_vector(55 downto 0);
-# pde : std_ulogic_vector(63 downto 0);
-# invalid : std_ulogic;
-# badtree : std_ulogic;
-# segerror : std_ulogic;
-# perm_err : std_ulogic;
-# rc_error : std_ulogic;
-# end record;
-
-
-class RegStage(RecordObject):
- def __init__(self, name=None):
- super().__init__(self, name=name)
- # latched request from loadstore1
- self.valid = Signal(reset_less=True)
- self.iside = Signal(reset_less=True)
- self.store = Signal(reset_less=True)
- self.priv = Signal(reset_less=True)
- self.addr = Signal(64, reset_less=True)
- self.inval_all = Signal(reset_less=True)
- # config SPRs
- self.prtbl = Signal(64, reset_less=True)
- self.pid = Signal(32, reset_less=True)
- # internal state
- self.state = State.IDLE
- self.done = Signal(reset_less=True)
- self.err = Signal(reset_less=True)
- self.pgtbl0 = Signal(64, reset_less=True)
- self.pt0_valid = Signal(reset_less=True)
- self.pgtbl3 = Signal(64, reset_less=True)
- self.pt3_valid = Signal(reset_less=True)
- self.shift = Signal(6, reset_less=True)
- self.mask_size = Signal(5, reset_less=True)
- self.pgbase = Signal(56, reset_less=True)
- self.pde = Signal(64, reset_less=True)
- self.invalid = Signal(reset_less=True)
- self.badtree = Signal(reset_less=True)
- self.segerror = Signal(reset_less=True)
- self.perm_err = Signal(reset_less=True)
- self.rc_error = Signal(reset_less=True)
-
-
-# Radix MMU
-# Supports 4-level trees as in arch 3.0B, but not the
-# two-step translation for guests under a hypervisor
-# (i.e. there is no gRA -> hRA translation).
-class MMU(Elaboratable):
-# entity mmu is
-# port (
-# clk : in std_ulogic;
-# rst : in std_ulogic;
-#
-# l_in : in Loadstore1ToMmuType;
-# l_out : out MmuToLoadstore1Type;
-#
-# d_out : out MmuToDcacheType;
-# d_in : in DcacheToMmuType;
-#
-# i_out : out MmuToIcacheType
-# );
-# end mmu;
- def __init__(self):
- self.l_in = LoadStore1ToMmuType()
- self.l_out = MmuToLoadStore1Type()
- self.d_out = MmuToDcacheType()
- self.d_in = DcacheToMmuType()
- self.i_out = MmuToIcacheType()
-
-# signal addrsh : std_ulogic_vector(15 downto 0);
-# signal mask : std_ulogic_vector(15 downto 0);
-# signal finalmask : std_ulogic_vector(43 downto 0);
- self.addrsh = Signal(16)
- self.mask = Signal(16)
- self.finalmask = Signal(44)
-
-# signal r, rin : reg_stage_t;
- self.r = RegStage()
- self.rin = RegStage()
-
-# begin
-def elaborate(self, platform):
-# -- Multiplex internal SPR values back to loadstore1,
-# -- selected by l_in.sprn.
- # Multiplex internal SPR values back to loadstore1,
- # selected by l_in.sprn.
- m = Module()
-
- comb = m.d.comb
- sync = m.d.sync
-
- l_in = self.l_in
- l_out = self.l_out
- d_out = self.d_out
- d_in = self.d_in
- i_out = self.i_out
-
- addrsh = self.addrsh
- mask = self.mask
- finalmask = self.finalmask
-
- r = self.r
- rin = self.rin
-
-# l_out.sprval <= r.prtbl when l_in.sprn(9) = '1'
- with m.If(l_in.sprn[9]):
- comb += l_out.sprval.eq(r.prtbl)
-
-# else x"00000000" & r.pid;
- with m.Else():
- comb += l_out.sprval.eq(Cat(r.pid,
- Const(0x00000000, 32))
-
-# if rin.valid = '1' then
-# report "MMU got tlb miss for "
-# & to_hstring(rin.addr);
-# end if;
- with m.If(rin.valid):
- print(f"MMU got tlb miss for {rin.addr}")
-
-# if l_out.done = '1' then
-# report "MMU completing op without error";
-# end if;
- with m.If(l_out.done):
- print("MMU completing op without error")
-
-# if l_out.err = '1' then
-# report "MMU completing op with err invalid=" &
-# std_ulogic'image(l_out.invalid) &
-# " badtree=" & std_ulogic'image(
-# l_out.badtree);
-# end if;
- with m.If(l_out.err):
- print(f"MMU completing op with err invalid=
- {l_out.invalid} badtree={l_out.badtree}")
-
-# if rin.state = RADIX_LOOKUP then
-# report "radix lookup shift=" & integer'image(
-# to_integer(rin.shift)) & " msize=" &
-# integer'image(to_integer(rin.mask_size));
-# end if;
- with m.If(rin.state == State.RADIX_LOOKUP):
- print(f"radix lookup shift={rin.shift}
- msize={rin.mask_size}")
-
-# if r.state = RADIX_LOOKUP then
-# report "send load addr=" & to_hstring(d_out.addr)
-# & " addrsh=" & to_hstring(addrsh) &
-# " mask=" & to_hstring(mask);
-# end if;
- with m.If(r.state == State.RADIX_LOOKUP):
- print(f"send load addr={d_out.addr}
- addrsh={addrsh} mask={mask}")
-
-# r <= rin;
- sync += r.eq(rin)
-# end process;
-
-# -- generate mask for extracting address fields for PTE address
-# -- generation
-# addrmaskgen: process(all)
-# generate mask for extracting address fields for PTE address
-# generation
-class AddrMaskGen(Elaboratable, MMU):
- def __init__(self):
-# variable m : std_ulogic_vector(15 downto 0);
- super().__init__()
- self.msk = Signal(16)
-
-# begin
- def elaborate(self, platform):
- m = Module()
-
- comb = m.d.comb
- sync = m.d.sync
-
- rst = ResetSignal()
-
- msk = self.msk
-
- r = self.r
- mask = self.mask
-
-# -- mask_count has to be >= 5
-# m := x"001f";
- # mask_count has to be >= 5
- comb += mask.eq(Const(0x001F, 16)
-
-# for i in 5 to 15 loop
- for i in range(5,16):
-# if i < to_integer(r.mask_size) then
- with m.If(i < r.mask_size):
-# m(i) := '1';
- comb += msk[i].eq(1)
-# end if;
-# end loop;
-# mask <= m;
- comb += mask.eq(msk)
-# end process;
-
-# -- generate mask for extracting address bits to go in
-# -- TLB entry in order to support pages > 4kB
-# finalmaskgen: process(all)
-# generate mask for extracting address bits to go in
-# TLB entry in order to support pages > 4kB
-class FinalMaskGen(Elaboratable, MMU):
- def __init__(self):
-# variable m : std_ulogic_vector(43 downto 0);
- super().__init__()
- self.msk = Signal(44)
-
-# begin
- def elaborate(self, platform):
- m = Module()
-
- comb = m.d.comb
- sync = m.d.sync
-
- rst = ResetSignal()
-
- mask = self.mask
- r = self.r
-
- msk = self.msk
-
-# for i in 0 to 43 loop
- for i in range(44):
-# if i < to_integer(r.shift) then
- with m.If(i < r.shift):
-# m(i) := '1';
- comb += msk.eq(1)
-# end if;
-# end loop;
-# finalmask <= m;
- comb += self.finalmask(mask)
-# end process;
-
-# mmu_1: process(all)
-class MMU1(Elaboratable):
- def __init__(self):
-# variable v : reg_stage_t;
-# variable dcreq : std_ulogic;
-# variable tlb_load : std_ulogic;
-# variable itlb_load : std_ulogic;
-# variable tlbie_req : std_ulogic;
-# variable prtbl_rd : std_ulogic;
-# variable pt_valid : std_ulogic;
-# variable effpid : std_ulogic_vector(31 downto 0);
-# variable prtable_addr : std_ulogic_vector(63 downto 0);
-# variable rts : unsigned(5 downto 0);
-# variable mbits : unsigned(5 downto 0);
-# variable pgtable_addr : std_ulogic_vector(63 downto 0);
-# variable pte : std_ulogic_vector(63 downto 0);
-# variable tlb_data : std_ulogic_vector(63 downto 0);
-# variable nonzero : std_ulogic;
-# variable pgtbl : std_ulogic_vector(63 downto 0);
-# variable perm_ok : std_ulogic;
-# variable rc_ok : std_ulogic;
-# variable addr : std_ulogic_vector(63 downto 0);
-# variable data : std_ulogic_vector(63 downto 0);
- self.v = RegStage()
- self.dcrq = Signal()
- self.tlb_load = Signal()
- self.itlb_load = Signal()
- self.tlbie_req = Signal()
- self.prtbl_rd = Signal()
- self.pt_valid = Signal()
- self.effpid = Signal(32)
- self.prtable_addr = Signal(64)
- self.rts = Signal(6)
- self.mbits = Signal(6)
- self.pgtable_addr = Signal(64)
- self.pte = Signal(64)
- self.tlb_data = Signal(64)
- self.nonzero = Signal()
- self.pgtbl = Signal(64)
- self.perm_ok = Signal()
- self.rc_ok = Signal()
- self.addr = Signal(64)
- self.data = Signal(64)
-
-# begin
- def elaborate(self, platform):
-
- m = Module()
-
- comb = m.d.comb
- sync = m.d.sync
-
- l_in = self.l_in
- l_out = self.l_out
- d_out = self.d_out
- d_in = self.d_in
- i_out = self.i_out
-
- r = self.r
-
- v = self.v
- dcrq = self.dcrq
- tlb_load = self.tlb_load
- itlb_load = self.itlb_load
- tlbie_req = self.tlbie_req
- prtbl_rd = self.prtbl_rd
- pt_valid = self.pt_valid
- effpid = self.effpid
- prtable_addr = self.prtable_addr
- rts = self.rts
- mbits = self.mbits
- pgtable_addr = self.pgtable_addr
- pte = self.pte
- tlb_data = self.tlb_data
- nonzero = self.nonzero
- pgtbl = self.pgtbl
- perm_ok = self.perm_ok
- rc_ok = self.rc_ok
- addr = self.addr
- data = self.data
-
-# v := r;
-# v.valid := '0';
-# dcreq := '0';
-# v.done := '0';
-# v.err := '0';
-# v.invalid := '0';
-# v.badtree := '0';
-# v.segerror := '0';
-# v.perm_err := '0';
-# v.rc_error := '0';
-# tlb_load := '0';
-# itlb_load := '0';
-# tlbie_req := '0';
-# v.inval_all := '0';
-# prtbl_rd := '0';
-
- comb += v.eq(r)
- comb += v.valid.eq(0)
- comb += dcreq.eq(0)
- comb += v.done.eq(0)
- comb += v.err.eq(0)
- comb += v.invalid.eq(0)
- comb += v.badtree.eq(0)
- comb += v.segerror.eq(0)
- comb += v.perm_err.eq(0)
- comb += v.rc_error.eq(0)
- comb += tlb_load.eq(0)
- comb += itlb_load.eq(0)
- comb += tlbie_req.eq(0)
- comb += v.inval_all.eq(0)
- comb += prtbl_rd.eq(0)
-
-
-# -- Radix tree data structures in memory are
-# -- big-endian, so we need to byte-swap them
-# for i in 0 to 7 loop
- # Radix tree data structures in memory are
- # big-endian, so we need to byte-swap them
- for i in range(8):
-# data(i * 8 + 7 downto i * 8) := d_in.data(
-# (7 - i) * 8 + 7 downto (7 - i) * 8);
- comb += data[i * 8:i * 8 + 7 + 1].eq(
- d_in.data[
- (7 - i) * 8:(7 - i) * 8 + 7 + 1
- ])
-# end loop;
-
-# case r.state is
- with m.Switch(r.state):
-# when IDLE =>
- with m.Case(State.IDLE):
-# if l_in.addr(63) = '0' then
-# pgtbl := r.pgtbl0;
-# pt_valid := r.pt0_valid;
- with m.If(~l_in.addr[63]):
- comb += pgtbl.eq(r.pgtbl0)
- comb += pt_valid.eq(r.pt0_valid)
-# else
-# pgtbl := r.pgtbl3;
-# pt_valid := r.pt3_valid;
- with m.Else():
- comb += pgtbl.eq(r.pt3_valid)
- comb += pt_valid.eq(r.pt3_valid)
-# end if;
-
-# -- rts == radix tree size, # address bits being
-# -- translated
-# rts := unsigned('0' & pgtbl(62 downto 61) &
-# pgtbl(7 downto 5));
- # rts == radix tree size, number of address bits
- # being translated
- comb += rts.eq((Cat(
- Cat(
- pgtbl[5:8],
- pgtbl[61:63]
- ),
- Const(0b0,1)
- )).as_unsigned())
-
-# -- mbits == # address bits to index top level
-# -- of tree
-# mbits := unsigned('0' & pgtbl(4 downto 0));
- # mbits == number of address bits to index top
- # level of tree
- comb += mbits.eq((
- Cat(pgtbl[0:5], Const(0b0, 1))
- ).as_unsigned())
-# -- set v.shift to rts so that we can use finalmask
-# -- for the segment check
-# v.shift := rts;
-# v.mask_size := mbits(4 downto 0);
-# v.pgbase := pgtbl(55 downto 8) & x"00";
- # set v.shift to rts so that we can use finalmask
- # for the segment check
- comb += v.shift.eq(rts)
- comb += v.mask_size.eq(mbits[0:5])
- comb += v.pgbase.eq(Cat(
- Cont(0x00, 8),
- pgtbl[8:56]
- ))
-
-# if l_in.valid = '1' then
- with m.If(l_in.valid):
-# v.addr := l_in.addr;
-# v.iside := l_in.iside;
-# v.store := not (l_in.load or l_in.iside);
-# v.priv := l_in.priv;
- comb += v.addr.eq(l_in.addr
- comb += v.iside.eq(l_in.iside)
- comb += v.store.eq(~(l_in.load | l_in.siside))
-# if l_in.tlbie = '1' then
- with m.If(l_in.tlbie):
-# -- Invalidate all iTLB/dTLB entries for
-# -- tlbie with RB[IS] != 0 or RB[AP] != 0,
-# -- or for slbia
-# v.inval_all := l_in.slbia or l_in.addr(11)
-# or l_in.addr(10) or
-# l_in.addr(7) or l_in.addr(6)
-# or l_in.addr(5);
- # Invalidate all iTLB/dTLB entries for
- # tlbie with RB[IS] != 0 or RB[AP] != 0,
- # or for slbia
- comb += v.inval_all.eq(l_in.slbia
- | l_in.addr[11]
- | l_in.addr[10]
- | l_in.addr[7]
- | l_in.addr[6]
- | l_in.addr[5]
- )
-# -- The RIC field of the tlbie instruction
-# -- comes across on the sprn bus as bits 2--3.
-# -- RIC=2 flushes process table caches.
-# if l_in.sprn(3) = '1' then
- # The RIC field of the tlbie instruction
- # comes across on the sprn bus as bits 2--3.
- # RIC=2 flushes process table caches.
- with m.If(l_in.sprn[3]):
-# v.pt0_valid := '0';
-# v.pt3_valid := '0';
- comb += v.pt0_valid.eq(0)
- comb += v.pt3_valid.eq(0)
-# end if;
-# v.state := DO_TLBIE;
- comb += v.state.eq(State.DO_TLBIE)
-# else
- with m.Else():
-# v.valid := '1';
- comb += v.valid.eq(1)
-# if pt_valid = '0' then
- with m.If(~pt_valid):
-# -- need to fetch process table entry
-# -- set v.shift so we can use finalmask
-# -- for generating the process table
-# -- entry address
-# v.shift := unsigned('0' & r.prtbl(
-# 4 downto 0));
-# v.state := PROC_TBL_READ;
- # need to fetch process table entry
- # set v.shift so we can use finalmask
- # for generating the process table
- # entry address
- comb += v.shift.eq((Cat(
- r.prtble[0:5],
- Const(0b0, 1)
- )).as_unsigned())
- comb += v.state.eq(State.PROC_TBL_READ)
-
-# elsif mbits = 0 then
- with m.If(~mbits):
-# -- Use RPDS = 0 to disable radix
-# -- tree walks
-# v.state := RADIX_FINISH;
-# v.invalid := '1';
- # Use RPDS = 0 to disable radix
- # tree walks
- comb += v.state.eq(State.RADIX_FINISH)
- comb += v.invalid.eq(1)
-# else
- with m.Else():
-# v.state := SEGMENT_CHECK;
- comb += v.state.eq(State.SEGMENT_CHECK)
-# end if;
-# end if;
-# end if;
-
-# if l_in.mtspr = '1' then
- with m.If(l_in.mtspr):
-# -- Move to PID needs to invalidate L1 TLBs
-# -- and cached pgtbl0 value. Move to PRTBL
-# -- does that plus invalidating the cached
-# -- pgtbl3 value as well.
-# if l_in.sprn(9) = '0' then
- # Move to PID needs to invalidate L1 TLBs
- # and cached pgtbl0 value. Move to PRTBL
- # does that plus invalidating the cached
- # pgtbl3 value as well.
- with m.If(~l_in.sprn[9]):
-# v.pid := l_in.rs(31 downto 0);
- comb += v.pid.eq(l_in.rs[0:32])
-# else
- with m.Else():
-# v.prtbl := l_in.rs;
-# v.pt3_valid := '0';
- comb += v.prtbl.eq(l_in.rs)
- comb += v.pt3_valid.eq(0)
-# end if;
-
-# v.pt0_valid := '0';
-# v.inval_all := '1';
-# v.state := DO_TLBIE;
- comb += v.pt0_valid.eq(0)
- comb += v.inval_all.eq(1)
- comb += v.state.eq(State.DO_TLBIE)
-# end if;
-
-# when DO_TLBIE =>
- with m.Case(State.DO_TLBIE):
-# dcreq := '1';
-# tlbie_req := '1';
-# v.state := TLB_WAIT;
- comb += dcreq.eq(1)
- comb += tlbie_req.eq(1)
- comb += v.state.eq(State.TLB_WAIT)
-
-# when TLB_WAIT =>
- with m.Case(State.TLB_WAIT):
-# if d_in.done = '1' then
- with m.If(d_in.done):
-# v.state := RADIX_FINISH;
- comb += v.state.eq(State.RADIX_FINISH)
-# end if;
-
-# when PROC_TBL_READ =>
- with m.Case(State.PROC_TBL_READ):
-# dcreq := '1';
-# prtbl_rd := '1';
-# v.state := PROC_TBL_WAIT;
- comb += dcreq.eq(1)
- comb += prtbl_rd.eq(1)
- comb += v.state.eq(State.PROC_TBL_WAIT)
-
-# when PROC_TBL_WAIT =>
- with m.Case(State.PROC_TBL_WAIT):
-# if d_in.done = '1' then
- with m.If(d_in.done):
-# if r.addr(63) = '1' then
- with m.If(r.addr[63]):
-# v.pgtbl3 := data;
-# v.pt3_valid := '1';
- comb += v.pgtbl3.eq(data)
- comb += v.pt3_valid.eq(1)
-# else
- with m.Else():
-# v.pgtbl0 := data;
-# v.pt0_valid := '1';
- comb += v.pgtbl0.eq(data)
- comb += v.pt0_valid.eq(1)
-# end if;
-# -- rts == radix tree size, # address bits
-# -- being translated
-# rts := unsigned('0' & data(62 downto 61) &
-# data(7 downto 5));
- # rts == radix tree size, # address bits
- # being translated
- comb += rts.eq((
- Cat(
- Cat(
- data[5:8],
- data[61:63]
- ),
- Const(0b0, 1)
- )
- ).as_unsigned())
-
-# -- mbits == # address bits to index
-# -- top level of tree
-# mbits := unsigned('0' & data(4 downto 0));
- # mbits == # address bits to index
- # top level of tree
- comb += mbits.eq((
- Cat(
- data[0:5],
- Const(0b0, 1)
- )
- ).as_unsigned())
-# -- set v.shift to rts so that we can use
-# -- finalmask for the segment check
-# v.shift := rts;
-# v.mask_size := mbits(4 downto 0);
-# v.pgbase := data(55 downto 8) & x"00";
- # set v.shift to rts so that we can use
- # finalmask for the segment check
- comb += v.shift.eq(rts)
- comb += v.mask_size.eq(mbits[0:5])
- comb += v.pgbase.eq(
- Cat(
- Const(0x00, 8),
- data[8:56]
- )
- )
-
-# if mbits = 0 then
- with m.If(~mbits):
-# v.state := RADIX_FINISH;
-# v.invalid := '1';
- comb += v.state.eq(State.RADIX_FINISH)
- comb += v.invalid.eq(1)
-# else
-# v.state := SEGMENT_CHECK;
- comb += v.state.eq(State.SEGMENT_CHECK)
-# end if;
-# end if;
-
-# if d_in.err = '1' then
- with m.If(d_in.err):
-# v.state := RADIX_FINISH;
-# v.badtree := '1';
- comb += v.state.eq(State.RADIX_FINISH)
- comb += v.badtree.eq(1)
-# end if;
-
-# when SEGMENT_CHECK =>
- with m.Case(State.SEGMENT_CHECK):
-# mbits := '0' & r.mask_size;
-# v.shift := r.shift + (31 - 12) - mbits;
-# nonzero := or(r.addr(61 downto 31) and
-# not finalmask(30 downto 0));
- comb += mbits.eq(
- Cat(
- r.mask_size,
- Const(0b0, 1)
- )
- )
- comb += v.shift.eq(r.shift + (31 -12) - mbits)
- comb += nonzero.eq((
- r.addr[31:62] & ~finalmask[0:31]
- ).bool())
-# if r.addr(63) /= r.addr(62) or nonzero = '1' then
-# v.state := RADIX_FINISH;
-# v.segerror := '1';
- with m.If((r.addr[63] != r.addr[62])
- | nonzero):
- comb += v.state.eq(State.RADIX_FINISH)
- comb += v.segerror.eq(1)
-# elsif mbits < 5 or mbits > 16 or mbits
-# > (r.shift + (31 - 12)) then
-# v.state := RADIX_FINISH;
-# v.badtree := '1';
- with m.If((mbits < 5) | (mbits > 16)
- | (mbits > (r.shift + (31-12)))):
- comb += v.state.eq(State.RADIX_FINISH)
- comb += v.badtree.eq(1)
-# else
-# v.state := RADIX_LOOKUP;
- with m.Else():
- comb += v.state.eq(State.RADIX_LOOKUP)
-# end if;
-#
-# when RADIX_LOOKUP =>
- with m.Case(State.RADIX_LOOKUP):
-# dcreq := '1';
-# v.state := RADIX_READ_WAIT;
- comb += dcreq.eq(1)
- comb += v.state.eq(State.RADIX_READ_WAIT)
-
-# when RADIX_READ_WAIT =>
- with m.Case(State.RADIX_READ_WAIT):
-# if d_in.done = '1' then
- with m.If(d_in.done):
-# v.pde := data;
- comb += v.pde.eq(data)
-# -- test valid bit
-# if data(63) = '1' then
- # test valid bit
- with m.If(data[63]):
-# -- test leaf bit
-# if data(62) = '1' then
- # test leaf bit
- with m.If(data[62]):
-# -- check permissions and RC bits
-# perm_ok := '0';
- comb += perm_ok.eq(0)
-# if r.priv = '1' or data(3) = '0' then
- with m.If(r.priv | ~data[3])):
-# if r.iside = '0' then
-# perm_ok := data(1) or (data(2)
-# and not r.store);
- with m.If(~r.iside):
- comb += perm_ok.eq(
- (data[1] | data[2])
- & (~r.store)
- )
-# else
- with m.Else():
-# -- no IAMR, so no KUEP support
-# -- for now deny execute
-# -- permission if cache inhibited
-# perm_ok :=
-# data(0) and not data(5);
- # no IAMR, so no KUEP support
- # for now deny execute
- # permission if cache inhibited
- comb += perm_ok.eq(
- data[0] & ~data[5]
- )
-# end if;
-# end if;
-
-# rc_ok := data(8) and (data(7) or
-# not r.store);
- comb += rc_ok.eq(
- data[8] &
- (data[7] | (~r.store))
- )
-# if perm_ok = '1' and rc_ok = '1' then
-# v.state := RADIX_LOAD_TLB;
- with m.If(perm_ok & rc_ok):
- comb += v.state.eq(
- State.RADIX_LOAD_TLB
- )
-# else
- with m.Else():
-# v.state := RADIX_FINISH;
-# v.perm_err := not perm_ok;
-# -- permission error takes precedence
-# -- over RC error
-# v.rc_error := perm_ok;
- comb += vl.state.eq(
- State.RADIX_FINISH
- )
- comb += v.perm_err.eq(~perm_ok)
- # permission error takes precedence
- # over RC error
- comb += v.rc_error.eq(perm_ok)
-# end if;
-# else
- with m.Else():
-# mbits := unsigned('0' &
-# data(4 downto 0));
- comb += mbits.eq((
- Cat(
- data[0:5]
- Cont(0b0,1)
- )
- ).as_unsigned())
-# if mbits < 5 or mbits > 16 or
-# mbits > r.shift then
-# v.state := RADIX_FINISH;
-# v.badtree := '1';
- with m.If((mbits < 5) | (mbits > 16) |
- (mbits > r.shift)):
- comb += v.state.eq(
- State.RADIX_FINISH
- )
- comb += v.badtree.eq(1)
-# else
- with m.Else():
-# v.shift := v.shift - mbits;
-# v.mask_size := mbits(4 downto 0);
-# v.pgbase := data(55 downto 8)
-# & x"00";
-# v.state := RADIX_LOOKUP;
- comb += v.shift.eq(v.shif - mbits)
- comb += v.mask_size.eq(mbits[0:5])
- comb += v.pgbase.eq(
- Cat(
- Const(0x00, 8),
- mbits[8:56]
- )
- )
- comb += v.state.eq(
- State.RADIX_LOOKUP
- )
-# end if;
-# end if;
-# else
- with m.Else():
-# -- non-present PTE, generate a DSI
-# v.state := RADIX_FINISH;
-# v.invalid := '1';
- # non-present PTE, generate a DSI
- comb += v.state.eq(State.RADIX_FINISH)
- comb += v.invalid.eq(1)
-# end if;
-# end if;
-
-# if d_in.err = '1' then
- with m.If(d_in.err):
-# v.state := RADIX_FINISH;
-# v.badtree := '1';
- comb += v.state.eq(State.RADIX_FINISH)
- comb += v.badtree.eq(1)
-# end if;
-
-# when RADIX_LOAD_TLB =>
- with m.Case(State.RADIX_LOAD_TLB):
-# tlb_load := '1';
- comb += tlb_load.eq(1)
-# if r.iside = '0' then
- with m.If(~r.iside):
-# dcreq := '1';
-# v.state := TLB_WAIT;
- comb += dcreq.eq(1)
- comb += v.state.eq(State.TLB_WAIT)
-# else
- with m.Else():
-# itlb_load := '1';
-# v.state := IDLE;
- comb += itlb_load.eq(1)
- comb += v.state.eq(State.IDLE)
-# end if;
-
-# when RADIX_FINISH =>
-# v.state := IDLE;
- with m.Case(State.RADIX_FINISH):
-# v.state := IDLE
- comb += v.state.eq(State.IDLE)
-# end case;
-#
-# if v.state = RADIX_FINISH or (v.state = RADIX_LOAD_TLB
-# and r.iside = '1') then
- with m.If(v.state == State.RADIX_FINISH
- | (v.state == State.RADIX_LOAD_TLB & r.iside)
- )
-# v.err := v.invalid or v.badtree or v.segerror
-# or v.perm_err or v.rc_error;
-# v.done := not v.err;
- comb += v.err.eq(v.invalid | v.badtree | v.segerror
- | v.perm_err | v.rc_error)
- comb += v.done.eq(~v.err)
-# end if;
-
-# if r.addr(63) = '1' then
- with m.If(r.addr[63]):
-# effpid := x"00000000";
- comb += effpid.eq(Const(0x00000000, 32))
-# else
- with m.Else():
-# effpid := r.pid;
- comb += effpid.eq(r.pid)
-# end if;
-# prtable_addr := x"00" & r.prtbl(55 downto 36) &
-# ((r.prtbl(35 downto 12) and not finalmask(
-# 23 downto 0)) or (effpid(31 downto 8) and
-# finalmask(23 downto 0))) & effpid(7 downto 0)
-# & "0000";
- comb += prtable_addr.eq(
- Cat(
- Cat(
- Cat(
- Cat(Const(0b0000, 4), effpid[0:8]),
- (
- (r.prtble[12:36] & ~finalmask[0:24])
- | effpid[8:32] & finalmask[0:24]
- )
- ),
- r.prtbl[36:56]
- ),
- Const(0x00, 8)
- )
- )
-
-# pgtable_addr := x"00" & r.pgbase(55 downto 19) &
-# ((r.pgbase(18 downto 3) and not mask) or
-# (addrsh and mask)) & "000";
- comb += pgtable_addr.eq(
- Cat(
- Cat(
- Const(0b000, 3),
- (
- (r.pgbase[3:19] & ~mask)
- | (addrsh & mask)
- )
- ),
- Const(0x00, 8)
- )
- )
-
-# pte := x"00" & ((r.pde(55 downto 12) and not finalmask) or
-# (r.addr(55 downto 12) and finalmask)) & r.pde(11 downto 0);
- comb += pte.eq(
- Cat(
- Cat(
- r.pde[0:12],
- (
- (r.pde[12:56] & ~finalmask)
- | (r.addr[12:56] & finalmask)
- )
- ),
- Const(0x00, 8)
- )
- )
-
-# -- update registers
-# rin <= v;
- # update registers
- rin.eq(v)
-
-# -- drive outputs
-# if tlbie_req = '1' then
- # drive outputs
- with m.If(tlbie_req):
-# addr := r.addr;
-# tlb_data := (others => '0');
- comb += addr.eq(r.addr)
-# elsif tlb_load = '1' then
- with m.If(tlb_load):
-# addr := r.addr(63 downto 12) & x"000";
-# tlb_data := pte;
- comb += addr.eq(Cat(Const(0x000, 12), r.addr[12:64]))
-# elsif prtbl_rd = '1' then
- with m.If(prtbl_rd):
-# addr := prtable_addr;
-# tlb_data := (others => '0');
- comb += addr.eq(prtable_addr)
-# else
- with m.Else():
-# addr := pgtable_addr;
-# tlb_data := (others => '0');
- comb += addr.eq(pgtable_addr)
-# end if;
-
-# l_out.done <= r.done;
-# l_out.err <= r.err;
-# l_out.invalid <= r.invalid;
-# l_out.badtree <= r.badtree;
-# l_out.segerr <= r.segerror;
-# l_out.perm_error <= r.perm_err;
-# l_out.rc_error <= r.rc_error;
- comb += l_out.done.eq(r.done)
- comb += l_out.err.eq(r.err)
- comb += l_out.invalid.eq(r.invalid)
- comb += l_out.badtree.eq(r.badtree)
- comb += l_out.segerr.eq(r.segerror)
- comb += l_out.perm_error.eq(r.perm_err)
- comb += l_out.rc_error.eq(r.rc_error)
-
-# d_out.valid <= dcreq;
-# d_out.tlbie <= tlbie_req;
-# d_out.doall <= r.inval_all;
-# d_out.tlbld <= tlb_load;
-# d_out.addr <= addr;
-# d_out.pte <= tlb_data;
- comb += d_out.valid.eq(dcreq)
- comb += d_out.tlbie.eq(tlbie_req)
- comb += d_out.doall.eq(r.inval_all)
- comb += d_out.tlbld.eeq(tlb_load)
- comb += d_out.addr.eq(addr)
- comb += d_out.pte.eq(tlb_data)
-
-# i_out.tlbld <= itlb_load;
-# i_out.tlbie <= tlbie_req;
-# i_out.doall <= r.inval_all;
-# i_out.addr <= addr;
-# i_out.pte <= tlb_data;
- comb += i_out.tlbld.eq(itlb_load)
- comb += i_out.tblie.eq(tlbie_req)
- comb += i_out.doall.eq(r.inval_all)
- comb += i_out.addr.eq(addr)
- comb += i_out.pte.eq(tlb_data)
-
-# end process;
-# end;
+++ /dev/null
-from nmigen import Module, Signal
-from nmigen.sim.pysim import Simulator, Delay, Settle
-from nmigen.cli import rtlil
-import unittest
-from soc.decoder.isa.caller import ISACaller, special_sprs
-from soc.decoder.power_decoder import (create_pdecode)
-from soc.decoder.power_decoder2 import (PowerDecode2)
-from soc.decoder.power_enums import (XER_bits, Function, MicrOp, CryIn)
-from soc.decoder.selectable_int import SelectableInt
-from soc.simulator.program import Program
-from soc.decoder.isa.all import ISA
-from soc.config.endian import bigendian
-
-from soc.fu.test.common import (TestAccumulatorBase, TestCase, ALUHelpers)
-from soc.fu.mul.pipeline import MulBasePipe
-from soc.fu.mul.pipe_data import MulPipeSpec
-import random
-
-
-def get_cu_inputs(dec2, sim):
- """naming (res) must conform to MulFunctionUnit input regspec
- """
- res = {}
-
- yield from ALUHelpers.get_sim_int_ra(res, sim, dec2) # RA
- yield from ALUHelpers.get_sim_int_rb(res, sim, dec2) # RB
- yield from ALUHelpers.get_sim_xer_so(res, sim, dec2) # XER.so
-
- print("alu get_cu_inputs", res)
-
- return res
-
-
-def set_alu_inputs(alu, dec2, sim):
- # TODO: see https://bugs.libre-soc.org/show_bug.cgi?id=305#c43
- # detect the immediate here (with m.If(self.i.ctx.op.imm_data.imm_ok))
- # and place it into data_i.b
-
- inp = yield from get_cu_inputs(dec2, sim)
- print("set alu inputs", inp)
- yield from ALUHelpers.set_int_ra(alu, dec2, inp)
- yield from ALUHelpers.set_int_rb(alu, dec2, inp)
-
- yield from ALUHelpers.set_xer_so(alu, dec2, inp)
-
-
-# This test bench is a bit different than is usual. Initially when I
-# was writing it, I had all of the tests call a function to create a
-# device under test and simulator, initialize the dut, run the
-# simulation for ~2 cycles, and assert that the dut output what it
-# should have. However, this was really slow, since it needed to
-# create and tear down the dut and simulator for every test case.
-
-# Now, instead of doing that, every test case in MulTestCase puts some
-# data into the test_data list below, describing the instructions to
-# be tested and the initial state. Once all the tests have been run,
-# test_data gets passed to TestRunner which then sets up the DUT and
-# simulator once, runs all the data through it, and asserts that the
-# results match the pseudocode sim at every cycle.
-
-# By doing this, I've reduced the time it takes to run the test suite
-# massively. Before, it took around 1 minute on my computer, now it
-# takes around 3 seconds
-
-
-class MulTestCase(TestAccumulatorBase):
-
- def case_0_mullw(self):
- lst = [f"mullw 3, 1, 2"]
- initial_regs = [0] * 32
- #initial_regs[1] = 0xffffffffffffffff
- #initial_regs[2] = 0xffffffffffffffff
- initial_regs[1] = 0x2ffffffff
- initial_regs[2] = 0x2
- self.add_case(Program(lst, bigendian), initial_regs)
-
- def case_1_mullwo_(self):
- lst = [f"mullwo. 3, 1, 2"]
- initial_regs = [0] * 32
- initial_regs[1] = 0x3b34b06f
- initial_regs[2] = 0xfdeba998
- self.add_case(Program(lst, bigendian), initial_regs)
-
- def case_2_mullwo(self):
- lst = [f"mullwo 3, 1, 2"]
- initial_regs = [0] * 32
- initial_regs[1] = 0xffffffffffffa988 # -5678
- initial_regs[2] = 0xffffffffffffedcc # -1234
- self.add_case(Program(lst, bigendian), initial_regs)
-
- def case_3_mullw(self):
- lst = ["mullw 3, 1, 2",
- "mullw 3, 1, 2"]
- initial_regs = [0] * 32
- initial_regs[1] = 0x6
- initial_regs[2] = 0xe
- self.add_case(Program(lst, bigendian), initial_regs)
-
- def case_4_mullw_rand(self):
- for i in range(40):
- lst = ["mullw 3, 1, 2"]
- initial_regs = [0] * 32
- initial_regs[1] = random.randint(0, (1 << 64)-1)
- initial_regs[2] = random.randint(0, (1 << 64)-1)
- self.add_case(Program(lst, bigendian), initial_regs)
-
- def case_4_mullw_nonrand(self):
- for i in range(40):
- lst = ["mullw 3, 1, 2"]
- initial_regs = [0] * 32
- initial_regs[1] = i+1
- initial_regs[2] = i+20
- self.add_case(Program(lst, bigendian), initial_regs)
-
- def case_mulhw__regression_1(self):
- lst = ["mulhw. 3, 1, 2"
- ]
- initial_regs = [0] * 32
- initial_regs[1] = 0x7745b36eca6646fa
- initial_regs[2] = 0x47dfba3a63834ba2
- self.add_case(Program(lst, bigendian), initial_regs)
-
- def case_rand_mul_lh(self):
- insns = ["mulhw", "mulhw.", "mulhwu", "mulhwu."]
- for i in range(40):
- choice = random.choice(insns)
- lst = [f"{choice} 3, 1, 2"]
- initial_regs = [0] * 32
- initial_regs[1] = random.randint(0, (1 << 64)-1)
- initial_regs[2] = random.randint(0, (1 << 64)-1)
- self.add_case(Program(lst, bigendian), initial_regs)
-
- def case_rand_mullw(self):
- insns = ["mullw", "mullw.", "mullwo", "mullwo."]
- for i in range(40):
- choice = random.choice(insns)
- lst = [f"{choice} 3, 1, 2"]
- initial_regs = [0] * 32
- initial_regs[1] = random.randint(0, (1 << 64)-1)
- initial_regs[2] = random.randint(0, (1 << 64)-1)
- self.add_case(Program(lst, bigendian), initial_regs)
-
- def case_rand_mulld(self):
- insns = ["mulld", "mulld.", "mulldo", "mulldo."]
- for i in range(40):
- choice = random.choice(insns)
- lst = [f"{choice} 3, 1, 2"]
- initial_regs = [0] * 32
- initial_regs[1] = random.randint(0, (1 << 64)-1)
- initial_regs[2] = random.randint(0, (1 << 64)-1)
- self.add_case(Program(lst, bigendian), initial_regs)
-
- def case_rand_mulhd(self):
- insns = ["mulhd", "mulhd."]
- for i in range(40):
- choice = random.choice(insns)
- lst = [f"{choice} 3, 1, 2"]
- initial_regs = [0] * 32
- initial_regs[1] = random.randint(0, (1 << 64)-1)
- initial_regs[2] = random.randint(0, (1 << 64)-1)
- self.add_case(Program(lst, bigendian), initial_regs)
-
- def case_all(self):
- instrs = ["mulhw",
- "mulhw.", "mullw",
- "mullw.", "mullwo",
- "mullwo.", "mulhwu",
- "mulhwu.", "mulld",
- "mulld.", "mulldo",
- "mulldo.", "mulhd",
- "mulhd.", "mulhdu",
- "mulhdu."]
-
- test_values = [
- 0x0,
- 0x1,
- 0x2,
- 0xFFFF_FFFF_FFFF_FFFF,
- 0xFFFF_FFFF_FFFF_FFFE,
- 0x7FFF_FFFF_FFFF_FFFF,
- 0x8000_0000_0000_0000,
- 0x1234_5678_0000_0000,
- 0x1234_5678_8000_0000,
- 0x1234_5678_FFFF_FFFF,
- 0x1234_5678_7FFF_FFFF,
- 0xffffffff,
- 0x7fffffff,
- 0x80000000,
- 0xfffffffe,
- 0xfffffffd
- ]
-
- for instr in instrs:
- l = [f"{instr} 3, 1, 2"]
- for ra in test_values:
- for rb in test_values:
- initial_regs = [0] * 32
- initial_regs[1] = ra
- initial_regs[2] = rb
- # use "with" so as to close the files used
- with Program(l, bigendian) as prog:
- self.add_case(prog, initial_regs)
-
- def case_all_rb_randint(self):
- instrs = ["mulhw",
- "mulhw.", "mullw",
- "mullw.", "mullwo",
- "mullwo.", "mulhwu",
- "mulhwu.", "mulld",
- "mulld.", "mulldo",
- "mulldo.", "mulhd",
- "mulhd.", "mulhdu",
- "mulhdu."]
-
- test_values = [
- 0x0,
- 0x1,
- 0x2,
- 0xFFFF_FFFF_FFFF_FFFF,
- 0xFFFF_FFFF_FFFF_FFFE,
- 0x7FFF_FFFF_FFFF_FFFF,
- 0x8000_0000_0000_0000,
- 0x1234_5678_0000_0000,
- 0x1234_5678_8000_0000,
- 0x1234_5678_FFFF_FFFF,
- 0x1234_5678_7FFF_FFFF,
- 0xffffffff,
- 0x7fffffff,
- 0x80000000,
- 0xfffffffe,
- 0xfffffffd
- ]
-
- for instr in instrs:
- l = [f"{instr} 3, 1, 2"]
- for ra in test_values:
- initial_regs = [0] * 32
- initial_regs[1] = ra
- initial_regs[2] = random.randint(0, (1 << 64)-1)
- # use "with" so as to close the files used
- with Program(l, bigendian) as prog:
- self.add_case(prog, initial_regs)
-
- def case_all_rb_close_to_ov(self):
- instrs = ["mulhw",
- "mulhw.", "mullw",
- "mullw.", "mullwo",
- "mullwo.", "mulhwu",
- "mulhwu.", "mulld",
- "mulld.", "mulldo",
- "mulldo.", "mulhd",
- "mulhd.", "mulhdu",
- "mulhdu."]
-
- test_values = [
- 0x0,
- 0x1,
- 0x2,
- 0xFFFF_FFFF_FFFF_FFFF,
- 0xFFFF_FFFF_FFFF_FFFE,
- 0x7FFF_FFFF_FFFF_FFFF,
- 0x8000_0000_0000_0000,
- 0x1234_5678_0000_0000,
- 0x1234_5678_8000_0000,
- 0x1234_5678_FFFF_FFFF,
- 0x1234_5678_7FFF_FFFF,
- 0xffffffff,
- 0x7fffffff,
- 0x80000000,
- 0xfffffffe,
- 0xfffffffd
- ]
-
- for instr in instrs:
- for i in range(20):
- x = 0x7fffffff + random.randint(0, 1)
- ra = random.randint(0, (1 << 32)-1)
- rb = x // ra
-
- l = [f"{instr} 3, 1, 2"]
- initial_regs = [0] * 32
- initial_regs[1] = ra
- initial_regs[2] = rb
- # use "with" so as to close the files used
- with Program(l, bigendian) as prog:
- self.add_case(prog, initial_regs)
-
- def case_mulli(self):
-
- imm_values = [-32768, -32767, -32766, -2, -1, 0, 1, 2, 32766, 32767]
-
- ra_values = [
- 0x0,
- 0x1,
- 0x2,
- 0xFFFF_FFFF_FFFF_FFFF,
- 0xFFFF_FFFF_FFFF_FFFE,
- 0x7FFF_FFFF_FFFF_FFFF,
- 0x8000_0000_0000_0000,
- 0x1234_5678_0000_0000,
- 0x1234_5678_8000_0000,
- 0x1234_5678_FFFF_FFFF,
- 0x1234_5678_7FFF_FFFF,
- 0xffffffff,
- 0x7fffffff,
- 0x80000000,
- 0xfffffffe,
- 0xfffffffd
- ]
-
- for i in range(20):
- imm_values.append(random.randint(-1 << 15, (1 << 15) - 1))
-
- for i in range(14):
- ra_values.append(random.randint(0, (1 << 64) - 1))
-
- for ra in ra_values:
- for imm in imm_values:
- l = [f"mulli 0, 1, {imm}"]
- initial_regs = [0] * 32
- initial_regs[1] = ra
- # use "with" so as to close the files used
- with Program(l, bigendian) as prog:
- self.add_case(prog, initial_regs)
-
-# TODO add test case for these 3 operand cases (madd
-# needs to be implemented)
-# "maddhd","maddhdu","maddld"
-
- def case_ilang(self):
- pspec = MulPipeSpec(id_wid=2)
- alu = MulBasePipe(pspec)
- vl = rtlil.convert(alu, ports=alu.ports())
- with open("mul_pipeline.il", "w") as f:
- f.write(vl)
-
-
-class TestRunner(unittest.TestCase):
- def __init__(self, test_data):
- super().__init__("run_all")
- self.test_data = test_data
-
- def run_all(self):
- m = Module()
- comb = m.d.comb
- instruction = Signal(32)
-
- pdecode = create_pdecode()
-
- m.submodules.pdecode2 = pdecode2 = PowerDecode2(pdecode)
-
- pspec = MulPipeSpec(id_wid=2)
- m.submodules.alu = alu = MulBasePipe(pspec)
-
- comb += alu.p.data_i.ctx.op.eq_from_execute1(pdecode2.e)
- comb += alu.n.ready_i.eq(1)
- comb += pdecode2.dec.raw_opcode_in.eq(instruction)
- sim = Simulator(m)
-
- sim.add_clock(1e-6)
-
- def process():
- for test in self.test_data:
- print(test.name)
- program = test.program
- self.subTest(test.name)
- sim = ISA(pdecode2, test.regs, test.sprs, test.cr,
- test.mem, test.msr,
- bigendian=bigendian)
- gen = program.generate_instructions()
- instructions = list(zip(gen, program.assembly.splitlines()))
- yield Settle()
-
- index = sim.pc.CIA.value//4
- while index < len(instructions):
- ins, code = instructions[index]
-
- print("instruction: 0x{:X}".format(ins & 0xffffffff))
- print(code)
- if 'XER' in sim.spr:
- so = 1 if sim.spr['XER'][XER_bits['SO']] else 0
- ov = 1 if sim.spr['XER'][XER_bits['OV']] else 0
- ov32 = 1 if sim.spr['XER'][XER_bits['OV32']] else 0
- print("before: so/ov/32", so, ov, ov32)
-
- # ask the decoder to decode this binary data (endian'd)
- yield pdecode2.dec.bigendian.eq(bigendian) # little / big?
- yield instruction.eq(ins) # raw binary instr.
- yield Settle()
- fn_unit = yield pdecode2.e.do.fn_unit
- self.assertEqual(fn_unit, Function.MUL.value)
- yield from set_alu_inputs(alu, pdecode2, sim)
-
- # set valid for one cycle, propagate through pipeline...
- yield alu.p.valid_i.eq(1)
- yield
- yield alu.p.valid_i.eq(0)
-
- opname = code.split(' ')[0]
- yield from sim.call(opname)
- index = sim.pc.CIA.value//4
-
- # ...wait for valid to pop out the end
- vld = yield alu.n.valid_o
- while not vld:
- yield
- vld = yield alu.n.valid_o
- yield
-
- yield from self.check_alu_outputs(alu, pdecode2, sim, code)
- yield Settle()
-
- sim.add_sync_process(process)
- with sim.write_vcd("mul_simulator.vcd", "mul_simulator.gtkw",
- traces=[]):
- sim.run()
-
- def check_alu_outputs(self, alu, dec2, sim, code):
-
- rc = yield dec2.e.do.rc.data
- cridx_ok = yield dec2.e.write_cr.ok
- cridx = yield dec2.e.write_cr.data
-
- print("check extra output", repr(code), cridx_ok, cridx)
- if rc:
- self.assertEqual(cridx, 0, code)
-
- oe = yield dec2.e.do.oe.oe
- oe_ok = yield dec2.e.do.oe.ok
- if not oe or not oe_ok:
- # if OE not enabled, XER SO and OV must correspondingly be false
- so_ok = yield alu.n.data_o.xer_so.ok
- ov_ok = yield alu.n.data_o.xer_ov.ok
- self.assertEqual(so_ok, False, code)
- self.assertEqual(ov_ok, False, code)
-
- sim_o = {}
- res = {}
-
- yield from ALUHelpers.get_cr_a(res, alu, dec2)
- yield from ALUHelpers.get_xer_ov(res, alu, dec2)
- yield from ALUHelpers.get_int_o(res, alu, dec2)
- yield from ALUHelpers.get_xer_so(res, alu, dec2)
-
- yield from ALUHelpers.get_sim_int_o(sim_o, sim, dec2)
- yield from ALUHelpers.get_wr_sim_cr_a(sim_o, sim, dec2)
- yield from ALUHelpers.get_sim_xer_ov(sim_o, sim, dec2)
- yield from ALUHelpers.get_sim_xer_so(sim_o, sim, dec2)
-
- ALUHelpers.check_int_o(self, res, sim_o, code)
- ALUHelpers.check_xer_ov(self, res, sim_o, code)
- ALUHelpers.check_xer_so(self, res, sim_o, code)
- ALUHelpers.check_cr_a(self, res, sim_o, "CR%d %s" % (cridx, code))
-
-
-if __name__ == "__main__":
- unittest.main(exit=False)
- suite = unittest.TestSuite()
- suite.addTest(TestRunner(MulTestCase().test_data))
-
- runner = unittest.TextTestRunner()
- runner.run(suite)
projects / soc.git / commitdiff