--- /dev/null
+# IEEE Floating Point Adder (Single Precision)
+# Copyright (C) Jonathan P Dawson 2013
+# 2013-12-12
+
+from nmigen import Module, Signal, Cat, Mux, Array, Const
+from nmigen.lib.coding import PriorityEncoder
+from nmigen.cli import main, verilog
+from math import log
+
+from fpbase import FPNumIn, FPNumOut, FPOp, Overflow, FPBase, FPNumBase
+from fpbase import MultiShiftRMerge, Trigger
+from singlepipe import (ControlBase, StageChain, UnbufferedPipeline,
+ PassThroughStage)
+from multipipe import CombMuxOutPipe
+from multipipe import PriorityCombMuxInPipe
+
+from fpbase import FPState, FPID
+from fpcommon.getop import (FPGetOpMod, FPGetOp, FPNumBase2Ops, FPADDBaseData,
+ FPGet2OpMod, FPGet2Op)
+from fpcommon.denorm import (FPSCData, FPAddDeNormMod, FPAddDeNorm)
+from fpcommon.postcalc import FPAddStage1Data
+from fpcommon.postnormalise import (FPNorm1Data, FPNorm1ModSingle,
+ FPNorm1ModMulti, FPNorm1Single, FPNorm1Multi)
+from fpcommon.roundz import (FPRoundData, FPRoundMod, FPRound)
+from fpcommon.corrections import (FPCorrectionsMod, FPCorrections)
+from fpcommon.pack import (FPPackData, FPPackMod, FPPack)
+from fpcommon.normtopack import FPNormToPack
+from fpcommon.putz import (FPPutZ, FPPutZIdx)
+
+from fpadd.specialcases import (FPAddSpecialCasesMod, FPAddSpecialCases,
+ FPAddSpecialCasesDeNorm)
+from fpadd.align import (FPAddAlignMulti, FPAddAlignMultiMod, FPNumIn2Ops,
+ FPAddAlignSingleMod, FPAddAlignSingle)
+from fpadd.add0 import (FPAddStage0Data, FPAddStage0Mod, FPAddStage0)
+from fpadd.add1 import (FPAddStage1Mod, FPAddStage1)
+from fpadd.addstages import FPAddAlignSingleAdd
+
+
+class FPADDBasePipe(ControlBase):
+ def __init__(self, width, id_wid):
+ ControlBase.__init__(self)
+ self.pipe1 = FPAddSpecialCasesDeNorm(width, id_wid)
+ self.pipe2 = FPAddAlignSingleAdd(width, id_wid)
+ self.pipe3 = FPNormToPack(width, id_wid)
+
+ self._eqs = self.connect([self.pipe1, self.pipe2, self.pipe3])
+
+ def elaborate(self, platform):
+ m = Module()
+ m.submodules.scnorm = self.pipe1
+ m.submodules.addalign = self.pipe2
+ m.submodules.normpack = self.pipe3
+ m.d.comb += self._eqs
+ return m
+
+
+class FPADDInMuxPipe(PriorityCombMuxInPipe):
+ def __init__(self, width, id_wid, num_rows):
+ self.num_rows = num_rows
+ def iospec(): return FPADDBaseData(width, id_wid)
+ stage = PassThroughStage(iospec)
+ PriorityCombMuxInPipe.__init__(self, stage, p_len=self.num_rows)
+
+
+class FPADDMuxOutPipe(CombMuxOutPipe):
+ def __init__(self, width, id_wid, num_rows):
+ self.num_rows = num_rows
+ def iospec(): return FPPackData(width, id_wid)
+ stage = PassThroughStage(iospec)
+ CombMuxOutPipe.__init__(self, stage, n_len=self.num_rows)
+
+
+class FPADDMuxInOut:
+ """ Reservation-Station version of FPADD pipeline.
+
+ * fan-in on inputs (an array of FPADDBaseData: a,b,mid)
+ * 3-stage adder pipeline
+ * fan-out on outputs (an array of FPPackData: z,mid)
+
+ Fan-in and Fan-out are combinatorial.
+ """
+ def __init__(self, width, id_wid, num_rows):
+ self.num_rows = num_rows
+ self.inpipe = FPADDInMuxPipe(width, id_wid, num_rows) # fan-in
+ self.fpadd = FPADDBasePipe(width, id_wid) # add stage
+ self.outpipe = FPADDMuxOutPipe(width, id_wid, num_rows) # fan-out
+
+ self.p = self.inpipe.p # kinda annoying,
+ self.n = self.outpipe.n # use pipe in/out as this class in/out
+ self._ports = self.inpipe.ports() + self.outpipe.ports()
+
+ def elaborate(self, platform):
+ m = Module()
+ m.submodules.inpipe = self.inpipe
+ m.submodules.fpadd = self.fpadd
+ m.submodules.outpipe = self.outpipe
+
+ m.d.comb += self.inpipe.n.connect_to_next(self.fpadd.p)
+ m.d.comb += self.fpadd.connect_to_next(self.outpipe)
+
+ return m
+
+ def ports(self):
+ return self._ports
+
+
--- /dev/null
+# IEEE Floating Point Adder (Single Precision)
+# Copyright (C) Jonathan P Dawson 2013
+# 2013-12-12
+
+from nmigen import Module, Signal, Cat, Mux, Array, Const
+from nmigen.lib.coding import PriorityEncoder
+from nmigen.cli import main, verilog
+from math import log
+
+from fpbase import FPNumIn, FPNumOut, FPOp, Overflow, FPBase, FPNumBase
+from fpbase import MultiShiftRMerge, Trigger
+from singlepipe import (ControlBase, StageChain, UnbufferedPipeline,
+ PassThroughStage)
+from multipipe import CombMuxOutPipe
+from multipipe import PriorityCombMuxInPipe
+
+from fpbase import FPState, FPID
+from fpcommon.getop import (FPGetOpMod, FPGetOp, FPNumBase2Ops, FPADDBaseData,
+ FPGet2OpMod, FPGet2Op)
+from fpcommon.denorm import (FPSCData, FPAddDeNormMod, FPAddDeNorm)
+from fpcommon.postcalc import FPAddStage1Data
+from fpcommon.postnormalise import (FPNorm1Data, FPNorm1ModSingle,
+ FPNorm1ModMulti, FPNorm1Single, FPNorm1Multi)
+from fpcommon.roundz import (FPRoundData, FPRoundMod, FPRound)
+from fpcommon.corrections import (FPCorrectionsMod, FPCorrections)
+from fpcommon.pack import (FPPackData, FPPackMod, FPPack)
+from fpcommon.normtopack import FPNormToPack
+from fpcommon.putz import (FPPutZ, FPPutZIdx)
+
+from fpadd.specialcases import (FPAddSpecialCasesMod, FPAddSpecialCases,
+ FPAddSpecialCasesDeNorm)
+from fpadd.align import (FPAddAlignMulti, FPAddAlignMultiMod, FPNumIn2Ops,
+ FPAddAlignSingleMod, FPAddAlignSingle)
+from fpadd.add0 import (FPAddStage0Data, FPAddStage0Mod, FPAddStage0)
+from fpadd.add1 import (FPAddStage1Mod, FPAddStage1)
+from fpadd.addstages import FPAddAlignSingleAdd
+
+
+class FPOpData:
+ def __init__(self, width, id_wid):
+ self.z = FPOp(width)
+ self.mid = Signal(id_wid, reset_less=True)
+
+ def eq(self, i):
+ return [self.z.eq(i.z), self.mid.eq(i.mid)]
+
+ def ports(self):
+ return [self.z, self.mid]
+
+
+class FPADDBaseMod:
+
+ def __init__(self, width, id_wid=None, single_cycle=False, compact=True):
+ """ IEEE754 FP Add
+
+ * width: bit-width of IEEE754. supported: 16, 32, 64
+ * id_wid: an identifier that is sync-connected to the input
+ * single_cycle: True indicates each stage to complete in 1 clock
+ * compact: True indicates a reduced number of stages
+ """
+ self.width = width
+ self.id_wid = id_wid
+ self.single_cycle = single_cycle
+ self.compact = compact
+
+ self.in_t = Trigger()
+ self.i = self.ispec()
+ self.o = self.ospec()
+
+ self.states = []
+
+ def ispec(self):
+ return FPADDBaseData(self.width, self.id_wid)
+
+ def ospec(self):
+ return FPOpData(self.width, self.id_wid)
+
+ def add_state(self, state):
+ self.states.append(state)
+ return state
+
+ def get_fragment(self, platform=None):
+ """ creates the HDL code-fragment for FPAdd
+ """
+ m = Module()
+ m.submodules.out_z = self.o.z
+ m.submodules.in_t = self.in_t
+ if self.compact:
+ self.get_compact_fragment(m, platform)
+ else:
+ self.get_longer_fragment(m, platform)
+
+ with m.FSM() as fsm:
+
+ for state in self.states:
+ with m.State(state.state_from):
+ state.action(m)
+
+ return m
+
+ def get_longer_fragment(self, m, platform=None):
+
+ get = self.add_state(FPGet2Op("get_ops", "special_cases",
+ self.width))
+ get.setup(m, self.i)
+ a = get.out_op1
+ b = get.out_op2
+ get.trigger_setup(m, self.in_t.stb, self.in_t.ack)
+
+ sc = self.add_state(FPAddSpecialCases(self.width, self.id_wid))
+ sc.setup(m, a, b, self.in_mid)
+
+ dn = self.add_state(FPAddDeNorm(self.width, self.id_wid))
+ dn.setup(m, a, b, sc.in_mid)
+
+ if self.single_cycle:
+ alm = self.add_state(FPAddAlignSingle(self.width, self.id_wid))
+ alm.setup(m, dn.out_a, dn.out_b, dn.in_mid)
+ else:
+ alm = self.add_state(FPAddAlignMulti(self.width, self.id_wid))
+ alm.setup(m, dn.out_a, dn.out_b, dn.in_mid)
+
+ add0 = self.add_state(FPAddStage0(self.width, self.id_wid))
+ add0.setup(m, alm.out_a, alm.out_b, alm.in_mid)
+
+ add1 = self.add_state(FPAddStage1(self.width, self.id_wid))
+ add1.setup(m, add0.out_tot, add0.out_z, add0.in_mid)
+
+ if self.single_cycle:
+ n1 = self.add_state(FPNorm1Single(self.width, self.id_wid))
+ n1.setup(m, add1.out_z, add1.out_of, add0.in_mid)
+ else:
+ n1 = self.add_state(FPNorm1Multi(self.width, self.id_wid))
+ n1.setup(m, add1.out_z, add1.out_of, add1.norm_stb, add0.in_mid)
+
+ rn = self.add_state(FPRound(self.width, self.id_wid))
+ rn.setup(m, n1.out_z, n1.out_roundz, n1.in_mid)
+
+ cor = self.add_state(FPCorrections(self.width, self.id_wid))
+ cor.setup(m, rn.out_z, rn.in_mid)
+
+ pa = self.add_state(FPPack(self.width, self.id_wid))
+ pa.setup(m, cor.out_z, rn.in_mid)
+
+ ppz = self.add_state(FPPutZ("pack_put_z", pa.out_z, self.out_z,
+ pa.in_mid, self.out_mid))
+
+ pz = self.add_state(FPPutZ("put_z", sc.out_z, self.out_z,
+ pa.in_mid, self.out_mid))
+
+ def get_compact_fragment(self, m, platform=None):
+
+ get = FPGet2Op("get_ops", "special_cases", self.width, self.id_wid)
+ sc = FPAddSpecialCasesDeNorm(self.width, self.id_wid)
+ alm = FPAddAlignSingleAdd(self.width, self.id_wid)
+ n1 = FPNormToPack(self.width, self.id_wid)
+
+ get.trigger_setup(m, self.in_t.stb, self.in_t.ack)
+
+ chainlist = [get, sc, alm, n1]
+ chain = StageChain(chainlist, specallocate=True)
+ chain.setup(m, self.i)
+
+ for mod in chainlist:
+ sc = self.add_state(mod)
+
+ ppz = self.add_state(FPPutZ("pack_put_z", n1.out_z.z, self.o,
+ n1.out_z.mid, self.o.mid))
+
+ #pz = self.add_state(FPPutZ("put_z", sc.out_z.z, self.o,
+ # sc.o.mid, self.o.mid))
+
+
+class FPADDBase(FPState):
+
+ def __init__(self, width, id_wid=None, single_cycle=False):
+ """ IEEE754 FP Add
+
+ * width: bit-width of IEEE754. supported: 16, 32, 64
+ * id_wid: an identifier that is sync-connected to the input
+ * single_cycle: True indicates each stage to complete in 1 clock
+ """
+ FPState.__init__(self, "fpadd")
+ self.width = width
+ self.single_cycle = single_cycle
+ self.mod = FPADDBaseMod(width, id_wid, single_cycle)
+ self.o = self.ospec()
+
+ self.in_t = Trigger()
+ self.i = self.ispec()
+
+ self.z_done = Signal(reset_less=True) # connects to out_z Strobe
+ self.in_accept = Signal(reset_less=True)
+ self.add_stb = Signal(reset_less=True)
+ self.add_ack = Signal(reset=0, reset_less=True)
+
+ def ispec(self):
+ return self.mod.ispec()
+
+ def ospec(self):
+ return self.mod.ospec()
+
+ def setup(self, m, i, add_stb, in_mid):
+ m.d.comb += [self.i.eq(i),
+ self.mod.i.eq(self.i),
+ self.z_done.eq(self.mod.o.z.trigger),
+ #self.add_stb.eq(add_stb),
+ self.mod.in_t.stb.eq(self.in_t.stb),
+ self.in_t.ack.eq(self.mod.in_t.ack),
+ self.o.mid.eq(self.mod.o.mid),
+ self.o.z.v.eq(self.mod.o.z.v),
+ self.o.z.stb.eq(self.mod.o.z.stb),
+ self.mod.o.z.ack.eq(self.o.z.ack),
+ ]
+
+ m.d.sync += self.add_stb.eq(add_stb)
+ m.d.sync += self.add_ack.eq(0) # sets to zero when not in active state
+ m.d.sync += self.o.z.ack.eq(0) # likewise
+ #m.d.sync += self.in_t.stb.eq(0)
+
+ m.submodules.fpadd = self.mod
+
+ def action(self, m):
+
+ # in_accept is set on incoming strobe HIGH and ack LOW.
+ m.d.comb += self.in_accept.eq((~self.add_ack) & (self.add_stb))
+
+ #with m.If(self.in_t.ack):
+ # m.d.sync += self.in_t.stb.eq(0)
+ with m.If(~self.z_done):
+ # not done: test for accepting an incoming operand pair
+ with m.If(self.in_accept):
+ m.d.sync += [
+ self.add_ack.eq(1), # acknowledge receipt...
+ self.in_t.stb.eq(1), # initiate add
+ ]
+ with m.Else():
+ m.d.sync += [self.add_ack.eq(0),
+ self.in_t.stb.eq(0),
+ self.o.z.ack.eq(1),
+ ]
+ with m.Else():
+ # done: acknowledge, and write out id and value
+ m.d.sync += [self.add_ack.eq(1),
+ self.in_t.stb.eq(0)
+ ]
+ m.next = "put_z"
+
+ return
+
+ if self.in_mid is not None:
+ m.d.sync += self.out_mid.eq(self.mod.out_mid)
+
+ m.d.sync += [
+ self.out_z.v.eq(self.mod.out_z.v)
+ ]
+ # move to output state on detecting z ack
+ with m.If(self.out_z.trigger):
+ m.d.sync += self.out_z.stb.eq(0)
+ m.next = "put_z"
+ with m.Else():
+ m.d.sync += self.out_z.stb.eq(1)
+
+
+class FPADD(FPID):
+ """ FPADD: stages as follows:
+
+ FPGetOp (a)
+ |
+ FPGetOp (b)
+ |
+ FPAddBase---> FPAddBaseMod
+ | |
+ PutZ GetOps->Specials->Align->Add1/2->Norm->Round/Pack->PutZ
+
+ FPAddBase is tricky: it is both a stage and *has* stages.
+ Connection to FPAddBaseMod therefore requires an in stb/ack
+ and an out stb/ack. Just as with Add1-Norm1 interaction, FPGetOp
+ needs to be the thing that raises the incoming stb.
+ """
+
+ def __init__(self, width, id_wid=None, single_cycle=False, rs_sz=2):
+ """ IEEE754 FP Add
+
+ * width: bit-width of IEEE754. supported: 16, 32, 64
+ * id_wid: an identifier that is sync-connected to the input
+ * single_cycle: True indicates each stage to complete in 1 clock
+ """
+ self.width = width
+ self.id_wid = id_wid
+ self.single_cycle = single_cycle
+
+ #self.out_z = FPOp(width)
+ self.ids = FPID(id_wid)
+
+ rs = []
+ for i in range(rs_sz):
+ in_a = FPOp(width)
+ in_b = FPOp(width)
+ in_a.name = "in_a_%d" % i
+ in_b.name = "in_b_%d" % i
+ rs.append((in_a, in_b))
+ self.rs = Array(rs)
+
+ res = []
+ for i in range(rs_sz):
+ out_z = FPOp(width)
+ out_z.name = "out_z_%d" % i
+ res.append(out_z)
+ self.res = Array(res)
+
+ self.states = []
+
+ def add_state(self, state):
+ self.states.append(state)
+ return state
+
+ def get_fragment(self, platform=None):
+ """ creates the HDL code-fragment for FPAdd
+ """
+ m = Module()
+ m.submodules += self.rs
+
+ in_a = self.rs[0][0]
+ in_b = self.rs[0][1]
+
+ geta = self.add_state(FPGetOp("get_a", "get_b",
+ in_a, self.width))
+ geta.setup(m, in_a)
+ a = geta.out_op
+
+ getb = self.add_state(FPGetOp("get_b", "fpadd",
+ in_b, self.width))
+ getb.setup(m, in_b)
+ b = getb.out_op
+
+ ab = FPADDBase(self.width, self.id_wid, self.single_cycle)
+ ab = self.add_state(ab)
+ abd = ab.ispec() # create an input spec object for FPADDBase
+ m.d.sync += [abd.a.eq(a), abd.b.eq(b), abd.mid.eq(self.ids.in_mid)]
+ ab.setup(m, abd, getb.out_decode, self.ids.in_mid)
+ o = ab.o
+
+ pz = self.add_state(FPPutZIdx("put_z", o.z, self.res,
+ o.mid, "get_a"))
+
+ with m.FSM() as fsm:
+
+ for state in self.states:
+ with m.State(state.state_from):
+ state.action(m)
+
+ return m
+
+
+if __name__ == "__main__":
+ if True:
+ alu = FPADD(width=32, id_wid=5, single_cycle=True)
+ main(alu, ports=alu.rs[0][0].ports() + \
+ alu.rs[0][1].ports() + \
+ alu.res[0].ports() + \
+ [alu.ids.in_mid, alu.ids.out_mid])
+ else:
+ alu = FPADDBase(width=32, id_wid=5, single_cycle=True)
+ main(alu, ports=[alu.in_a, alu.in_b] + \
+ alu.in_t.ports() + \
+ alu.out_z.ports() + \
+ [alu.in_mid, alu.out_mid])
+
+
+ # works... but don't use, just do "python fname.py convert -t v"
+ #print (verilog.convert(alu, ports=[
+ # ports=alu.in_a.ports() + \
+ # alu.in_b.ports() + \
+ # alu.out_z.ports())
from fpadd.add1 import (FPAddStage1Mod, FPAddStage1)
from fpadd.addstages import FPAddAlignSingleAdd
+from fpadd.statemachine import FPADDBase, FPADD
+from fpadd.pipeline import FPADDMuxInOut
-class FPOpData:
- def __init__(self, width, id_wid):
- self.z = FPOp(width)
- self.mid = Signal(id_wid, reset_less=True)
-
- def eq(self, i):
- return [self.z.eq(i.z), self.mid.eq(i.mid)]
-
- def ports(self):
- return [self.z, self.mid]
-
-
-class FPADDBaseMod:
-
- def __init__(self, width, id_wid=None, single_cycle=False, compact=True):
- """ IEEE754 FP Add
-
- * width: bit-width of IEEE754. supported: 16, 32, 64
- * id_wid: an identifier that is sync-connected to the input
- * single_cycle: True indicates each stage to complete in 1 clock
- * compact: True indicates a reduced number of stages
- """
- self.width = width
- self.id_wid = id_wid
- self.single_cycle = single_cycle
- self.compact = compact
-
- self.in_t = Trigger()
- self.i = self.ispec()
- self.o = self.ospec()
-
- self.states = []
-
- def ispec(self):
- return FPADDBaseData(self.width, self.id_wid)
-
- def ospec(self):
- return FPOpData(self.width, self.id_wid)
-
- def add_state(self, state):
- self.states.append(state)
- return state
-
- def get_fragment(self, platform=None):
- """ creates the HDL code-fragment for FPAdd
- """
- m = Module()
- m.submodules.out_z = self.o.z
- m.submodules.in_t = self.in_t
- if self.compact:
- self.get_compact_fragment(m, platform)
- else:
- self.get_longer_fragment(m, platform)
-
- with m.FSM() as fsm:
-
- for state in self.states:
- with m.State(state.state_from):
- state.action(m)
-
- return m
-
- def get_longer_fragment(self, m, platform=None):
-
- get = self.add_state(FPGet2Op("get_ops", "special_cases",
- self.width))
- get.setup(m, self.i)
- a = get.out_op1
- b = get.out_op2
- get.trigger_setup(m, self.in_t.stb, self.in_t.ack)
-
- sc = self.add_state(FPAddSpecialCases(self.width, self.id_wid))
- sc.setup(m, a, b, self.in_mid)
-
- dn = self.add_state(FPAddDeNorm(self.width, self.id_wid))
- dn.setup(m, a, b, sc.in_mid)
-
- if self.single_cycle:
- alm = self.add_state(FPAddAlignSingle(self.width, self.id_wid))
- alm.setup(m, dn.out_a, dn.out_b, dn.in_mid)
- else:
- alm = self.add_state(FPAddAlignMulti(self.width, self.id_wid))
- alm.setup(m, dn.out_a, dn.out_b, dn.in_mid)
-
- add0 = self.add_state(FPAddStage0(self.width, self.id_wid))
- add0.setup(m, alm.out_a, alm.out_b, alm.in_mid)
-
- add1 = self.add_state(FPAddStage1(self.width, self.id_wid))
- add1.setup(m, add0.out_tot, add0.out_z, add0.in_mid)
-
- if self.single_cycle:
- n1 = self.add_state(FPNorm1Single(self.width, self.id_wid))
- n1.setup(m, add1.out_z, add1.out_of, add0.in_mid)
- else:
- n1 = self.add_state(FPNorm1Multi(self.width, self.id_wid))
- n1.setup(m, add1.out_z, add1.out_of, add1.norm_stb, add0.in_mid)
-
- rn = self.add_state(FPRound(self.width, self.id_wid))
- rn.setup(m, n1.out_z, n1.out_roundz, n1.in_mid)
-
- cor = self.add_state(FPCorrections(self.width, self.id_wid))
- cor.setup(m, rn.out_z, rn.in_mid)
-
- pa = self.add_state(FPPack(self.width, self.id_wid))
- pa.setup(m, cor.out_z, rn.in_mid)
-
- ppz = self.add_state(FPPutZ("pack_put_z", pa.out_z, self.out_z,
- pa.in_mid, self.out_mid))
-
- pz = self.add_state(FPPutZ("put_z", sc.out_z, self.out_z,
- pa.in_mid, self.out_mid))
-
- def get_compact_fragment(self, m, platform=None):
-
- get = FPGet2Op("get_ops", "special_cases", self.width, self.id_wid)
- sc = FPAddSpecialCasesDeNorm(self.width, self.id_wid)
- alm = FPAddAlignSingleAdd(self.width, self.id_wid)
- n1 = FPNormToPack(self.width, self.id_wid)
-
- get.trigger_setup(m, self.in_t.stb, self.in_t.ack)
-
- chainlist = [get, sc, alm, n1]
- chain = StageChain(chainlist, specallocate=True)
- chain.setup(m, self.i)
-
- for mod in chainlist:
- sc = self.add_state(mod)
-
- ppz = self.add_state(FPPutZ("pack_put_z", n1.out_z.z, self.o,
- n1.out_z.mid, self.o.mid))
-
- #pz = self.add_state(FPPutZ("put_z", sc.out_z.z, self.o,
- # sc.o.mid, self.o.mid))
-
-
-class FPADDBase(FPState):
-
- def __init__(self, width, id_wid=None, single_cycle=False):
- """ IEEE754 FP Add
-
- * width: bit-width of IEEE754. supported: 16, 32, 64
- * id_wid: an identifier that is sync-connected to the input
- * single_cycle: True indicates each stage to complete in 1 clock
- """
- FPState.__init__(self, "fpadd")
- self.width = width
- self.single_cycle = single_cycle
- self.mod = FPADDBaseMod(width, id_wid, single_cycle)
- self.o = self.ospec()
-
- self.in_t = Trigger()
- self.i = self.ispec()
-
- self.z_done = Signal(reset_less=True) # connects to out_z Strobe
- self.in_accept = Signal(reset_less=True)
- self.add_stb = Signal(reset_less=True)
- self.add_ack = Signal(reset=0, reset_less=True)
-
- def ispec(self):
- return self.mod.ispec()
-
- def ospec(self):
- return self.mod.ospec()
-
- def setup(self, m, i, add_stb, in_mid):
- m.d.comb += [self.i.eq(i),
- self.mod.i.eq(self.i),
- self.z_done.eq(self.mod.o.z.trigger),
- #self.add_stb.eq(add_stb),
- self.mod.in_t.stb.eq(self.in_t.stb),
- self.in_t.ack.eq(self.mod.in_t.ack),
- self.o.mid.eq(self.mod.o.mid),
- self.o.z.v.eq(self.mod.o.z.v),
- self.o.z.stb.eq(self.mod.o.z.stb),
- self.mod.o.z.ack.eq(self.o.z.ack),
- ]
-
- m.d.sync += self.add_stb.eq(add_stb)
- m.d.sync += self.add_ack.eq(0) # sets to zero when not in active state
- m.d.sync += self.o.z.ack.eq(0) # likewise
- #m.d.sync += self.in_t.stb.eq(0)
-
- m.submodules.fpadd = self.mod
-
- def action(self, m):
-
- # in_accept is set on incoming strobe HIGH and ack LOW.
- m.d.comb += self.in_accept.eq((~self.add_ack) & (self.add_stb))
-
- #with m.If(self.in_t.ack):
- # m.d.sync += self.in_t.stb.eq(0)
- with m.If(~self.z_done):
- # not done: test for accepting an incoming operand pair
- with m.If(self.in_accept):
- m.d.sync += [
- self.add_ack.eq(1), # acknowledge receipt...
- self.in_t.stb.eq(1), # initiate add
- ]
- with m.Else():
- m.d.sync += [self.add_ack.eq(0),
- self.in_t.stb.eq(0),
- self.o.z.ack.eq(1),
- ]
- with m.Else():
- # done: acknowledge, and write out id and value
- m.d.sync += [self.add_ack.eq(1),
- self.in_t.stb.eq(0)
- ]
- m.next = "put_z"
-
- return
-
- if self.in_mid is not None:
- m.d.sync += self.out_mid.eq(self.mod.out_mid)
-
- m.d.sync += [
- self.out_z.v.eq(self.mod.out_z.v)
- ]
- # move to output state on detecting z ack
- with m.If(self.out_z.trigger):
- m.d.sync += self.out_z.stb.eq(0)
- m.next = "put_z"
- with m.Else():
- m.d.sync += self.out_z.stb.eq(1)
-
-
-class FPADDBasePipe(ControlBase):
- def __init__(self, width, id_wid):
- ControlBase.__init__(self)
- self.pipe1 = FPAddSpecialCasesDeNorm(width, id_wid)
- self.pipe2 = FPAddAlignSingleAdd(width, id_wid)
- self.pipe3 = FPNormToPack(width, id_wid)
-
- self._eqs = self.connect([self.pipe1, self.pipe2, self.pipe3])
-
- def elaborate(self, platform):
- m = Module()
- m.submodules.scnorm = self.pipe1
- m.submodules.addalign = self.pipe2
- m.submodules.normpack = self.pipe3
- m.d.comb += self._eqs
- return m
-
-
-class FPADDInMuxPipe(PriorityCombMuxInPipe):
- def __init__(self, width, id_wid, num_rows):
- self.num_rows = num_rows
- def iospec(): return FPADDBaseData(width, id_wid)
- stage = PassThroughStage(iospec)
- PriorityCombMuxInPipe.__init__(self, stage, p_len=self.num_rows)
-
-
-class FPADDMuxOutPipe(CombMuxOutPipe):
- def __init__(self, width, id_wid, num_rows):
- self.num_rows = num_rows
- def iospec(): return FPPackData(width, id_wid)
- stage = PassThroughStage(iospec)
- CombMuxOutPipe.__init__(self, stage, n_len=self.num_rows)
-
-
-class FPADDMuxInOut:
- """ Reservation-Station version of FPADD pipeline.
-
- * fan-in on inputs (an array of FPADDBaseData: a,b,mid)
- * 3-stage adder pipeline
- * fan-out on outputs (an array of FPPackData: z,mid)
-
- Fan-in and Fan-out are combinatorial.
- """
- def __init__(self, width, id_wid, num_rows):
- self.num_rows = num_rows
- self.inpipe = FPADDInMuxPipe(width, id_wid, num_rows) # fan-in
- self.fpadd = FPADDBasePipe(width, id_wid) # add stage
- self.outpipe = FPADDMuxOutPipe(width, id_wid, num_rows) # fan-out
-
- self.p = self.inpipe.p # kinda annoying,
- self.n = self.outpipe.n # use pipe in/out as this class in/out
- self._ports = self.inpipe.ports() + self.outpipe.ports()
-
- def elaborate(self, platform):
- m = Module()
- m.submodules.inpipe = self.inpipe
- m.submodules.fpadd = self.fpadd
- m.submodules.outpipe = self.outpipe
-
- m.d.comb += self.inpipe.n.connect_to_next(self.fpadd.p)
- m.d.comb += self.fpadd.connect_to_next(self.outpipe)
-
- return m
-
- def ports(self):
- return self._ports
-
-
-class FPADD(FPID):
- """ FPADD: stages as follows:
-
- FPGetOp (a)
- |
- FPGetOp (b)
- |
- FPAddBase---> FPAddBaseMod
- | |
- PutZ GetOps->Specials->Align->Add1/2->Norm->Round/Pack->PutZ
-
- FPAddBase is tricky: it is both a stage and *has* stages.
- Connection to FPAddBaseMod therefore requires an in stb/ack
- and an out stb/ack. Just as with Add1-Norm1 interaction, FPGetOp
- needs to be the thing that raises the incoming stb.
- """
-
- def __init__(self, width, id_wid=None, single_cycle=False, rs_sz=2):
- """ IEEE754 FP Add
-
- * width: bit-width of IEEE754. supported: 16, 32, 64
- * id_wid: an identifier that is sync-connected to the input
- * single_cycle: True indicates each stage to complete in 1 clock
- """
- self.width = width
- self.id_wid = id_wid
- self.single_cycle = single_cycle
-
- #self.out_z = FPOp(width)
- self.ids = FPID(id_wid)
-
- rs = []
- for i in range(rs_sz):
- in_a = FPOp(width)
- in_b = FPOp(width)
- in_a.name = "in_a_%d" % i
- in_b.name = "in_b_%d" % i
- rs.append((in_a, in_b))
- self.rs = Array(rs)
-
- res = []
- for i in range(rs_sz):
- out_z = FPOp(width)
- out_z.name = "out_z_%d" % i
- res.append(out_z)
- self.res = Array(res)
-
- self.states = []
-
- def add_state(self, state):
- self.states.append(state)
- return state
-
- def get_fragment(self, platform=None):
- """ creates the HDL code-fragment for FPAdd
- """
- m = Module()
- m.submodules += self.rs
-
- in_a = self.rs[0][0]
- in_b = self.rs[0][1]
-
- geta = self.add_state(FPGetOp("get_a", "get_b",
- in_a, self.width))
- geta.setup(m, in_a)
- a = geta.out_op
-
- getb = self.add_state(FPGetOp("get_b", "fpadd",
- in_b, self.width))
- getb.setup(m, in_b)
- b = getb.out_op
-
- ab = FPADDBase(self.width, self.id_wid, self.single_cycle)
- ab = self.add_state(ab)
- abd = ab.ispec() # create an input spec object for FPADDBase
- m.d.sync += [abd.a.eq(a), abd.b.eq(b), abd.mid.eq(self.ids.in_mid)]
- ab.setup(m, abd, getb.out_decode, self.ids.in_mid)
- o = ab.o
-
- pz = self.add_state(FPPutZIdx("put_z", o.z, self.res,
- o.mid, "get_a"))
-
- with m.FSM() as fsm:
-
- for state in self.states:
- with m.State(state.state_from):
- state.action(m)
-
- return m
-
-
-if __name__ == "__main__":
- if True:
- alu = FPADD(width=32, id_wid=5, single_cycle=True)
- main(alu, ports=alu.rs[0][0].ports() + \
- alu.rs[0][1].ports() + \
- alu.res[0].ports() + \
- [alu.ids.in_mid, alu.ids.out_mid])
- else:
- alu = FPADDBase(width=32, id_wid=5, single_cycle=True)
- main(alu, ports=[alu.in_a, alu.in_b] + \
- alu.in_t.ports() + \
- alu.out_z.ports() + \
- [alu.in_mid, alu.out_mid])
-
-
- # works... but don't use, just do "python fname.py convert -t v"
- #print (verilog.convert(alu, ports=[
- # ports=alu.in_a.ports() + \
- # alu.in_b.ports() + \
- # alu.out_z.ports())
projects / ieee754fpu.git / commitdiff