whoops.... restoring to commit c4f99657f70

diff --git a/src/test_bsv/tests/test_pinmux.py b/src/test_bsv/tests/test_pinmux.py
index 368dd4e54bc0b09fb046a0186070e69eaa7c75f4..3b57937772e3ee35ff68f9280c937e39491e32db 100644 (file)
--- a/src/test_bsv/tests/test_pinmux.py
+++ b/src/test_bsv/tests/test_pinmux.py
@@ -305,7 +305,7 @@ def pinmux_twi_sda2(dut):
 
     # ok now set up gpioa0, set it to the opposite of twi_sda (0) i.e. gpioa0=1
     # and test that... then switch over pin0/mux=3
-    dut.peripheral_side_gpioa_a0_outen_in = 1 # 
+    dut.peripheral_side_gpioa_a0_outen_in = 1
     dut.mux_lines_cell0_mux_in = 0
     dut.EN_mux_lines_cell0_mux = 1
     dut.iocell_side_io0_cell_in_in = 1  # twi_sda=0, so gpioa0 should be 1
@@ -370,14 +370,3 @@ def pinmux_twi_sda2(dut):
 
     dut._log.info("Ok!, twi_sda test2 passed")
 
-def pinmux_twi_sda3(dut):
-    """Test for I2C multi-pin one FN_out (route 2 pins out to same function)
-    """
-    yield Timer(2)
-    # mux selection lines, each input two bit wide
-    dut.mux_lines_cell0_mux_in = 2
-    yield Timer(2)
-    # enable input for mux
-    dut.EN_mux_lines_cell0_mux = 0
-    dut.EN_mux_lines_cell1_mux = 1
-    dut.EN_mux_lines_cell2_mux = 0