from ifaceprint import display, display_fns, check_functions
from ifaceprint import display_fixed
+
def pinspec():
pinouts = {}
'E': 16,
'F': 48,
'G': 24,
- }
+ }
bankspec = {}
pkeys = pinbanks.keys()
pkeys.sort()
print
fixedpins = {
- 'CTRL_SYS':
+ 'CTRL_SYS':
[
- 'TEST', 'BOOT_SEL',
- 'NMI#', 'RESET#',
- 'CLK24M_IN', 'CLK24M_OUT',
- 'CLK32K_IN', 'CLK32K_OUT',
- 'PLLTEST', 'PLLREGIO', 'PLLVP25',
- 'PLLDV', 'PLLVREG', 'PLLGND',
- ],
-
- 'POWER_CPU':
+ 'TEST', 'BOOT_SEL',
+ 'NMI#', 'RESET#',
+ 'CLK24M_IN', 'CLK24M_OUT',
+ 'CLK32K_IN', 'CLK32K_OUT',
+ 'PLLTEST', 'PLLREGIO', 'PLLVP25',
+ 'PLLDV', 'PLLVREG', 'PLLGND',
+ ],
+
+ 'POWER_CPU':
['VDD0_CPU', 'VDD1_CPU', 'VDD2_CPU', 'VDD3_CPU', 'VDD4_CPU', 'VDD5_CPU',
'GND0_CPU', 'GND1_CPU', 'GND2_CPU', 'GND3_CPU', 'GND4_CPU', 'GND5_CPU',
- ],
+ ],
- 'POWER_DLL':
- ['VDD0_DLL', 'VDD1_DLL', 'VDD2_DLL',
- 'GND0_DLL', 'GND1_DLL', 'GND2_DLL',
- ],
+ 'POWER_DLL':
+ ['VDD0_DLL', 'VDD1_DLL', 'VDD2_DLL',
+ 'GND0_DLL', 'GND1_DLL', 'GND2_DLL',
+ ],
- 'POWER_INT':
- ['VDD0_INT', 'VDD1_INT', 'VDD2_INT', 'VDD3_INT', 'VDD4_INT',
- 'VDD5_INT', 'VDD6_INT', 'VDD7_INT', 'VDD8_INT', 'VDD9_INT',
- 'GND0_INT', 'GND1_INT', 'GND2_INT', 'GND3_INT', 'GND4_INT',
- 'GND5_INT', 'GND6_INT', 'GND7_INT', 'GND8_INT', 'GND9_INT',
- ],
+ 'POWER_INT':
+ ['VDD0_INT', 'VDD1_INT', 'VDD2_INT', 'VDD3_INT', 'VDD4_INT',
+ 'VDD5_INT', 'VDD6_INT', 'VDD7_INT', 'VDD8_INT', 'VDD9_INT',
+ 'GND0_INT', 'GND1_INT', 'GND2_INT', 'GND3_INT', 'GND4_INT',
+ 'GND5_INT', 'GND6_INT', 'GND7_INT', 'GND8_INT', 'GND9_INT',
+ ],
- 'POWER_GPIO':
+ 'POWER_GPIO':
['VDD_GPIOA', 'VDD_GPIOB', 'VDD_GPIOC',
'VDD_GPIOD', 'VDD_GPIOE', 'VDD_GPIOF',
'VDD_GPIOG',
'GND_GPIOA', 'GND_GPIOB', 'GND_GPIOC',
'GND_GPIOD', 'GND_GPIOE', 'GND_GPIOF',
'GND_GPIOG',
- ]
+ ]
- }
+ }
display_fixed(fixedpins, len(pinouts))
'ULPI1': 'ULPI (USB Low Pin-count) 1',
'ULPI2': 'ULPI (USB Low Pin-count) 2',
'ULPI3': 'ULPI (USB Low Pin-count) 3',
- }
-
+ }
+
fns = display_fns(bankspec, pinouts, function_names)
print
# using "BM:Name". Pins are removed in-order as listed from
# lists (interfaces, EINTs, PWMs) from available pins.
- # Robotics scenario.
+ # Robotics scenario.
- robotics = ['FB', 'RG', 'ULPI0/8',
+ robotics = ['FB', 'RG', 'ULPI0/8',
'SD0',
- 'JTAG0', 'E1:UART0',
- 'D1:SPI0', 'E1:TWI0']
+ 'JTAG0', 'E1:UART0',
+ 'D1:SPI0', 'E1:TWI0']
robotics_pwm = []
for i in range(32):
robotics_pwm.append('PWM_%d' % i)
robotics_eint = ['EINT24', 'EINT25', 'EINT26', 'EINT27',
- 'EINT20', 'EINT21', 'EINT22', 'EINT23']
+ 'EINT20', 'EINT21', 'EINT22', 'EINT23']
robotics_eint = []
unused_pins = check_functions("Robotics", bankspec, fns, pinouts,
- robotics, robotics_eint, robotics_pwm)
+ robotics, robotics_eint, robotics_pwm)
print "# Reference Datasheets"
print
#!/usr/bin/env python
+
class Pinouts(object):
def __init__(self):
self.pins = {}
class Pins(object):
def __init__(self, fname, pingroup, bankspec, suffix, offs, bank, mux,
- spec=None, limit=None, origsuffix=None):
+ spec=None, limit=None, origsuffix=None):
# function type can be in, out or inout, represented by - + *
# strip function type out of each pin name
# create consistent name suffixes
pingroup = namesuffix(fname, suffix, pingroup)
- suffix = '' # hack
+ suffix = '' # hack
res = {}
names = {}
def i2s(bankspec, suffix, offs, bank, mux=1, spec=None, limit=None):
i2spins = ['MCK+', 'BCK+', 'LRCK+', 'DI-', 'DO+']
- #for i in range(4):
+ # for i in range(4):
# i2spins.append("DO%d+" % i)
return Pins('IIS', i2spins, bankspec, suffix, offs, bank, mux, spec, limit,
origsuffix=suffix)
+
def emmc(bankspec, suffix, offs, bank, mux=1, spec=None):
emmcpins = ['CMD+', 'CLK+']
for i in range(8):
return Pins('MMC', emmcpins, bankspec, suffix, offs, bank, mux, spec,
origsuffix=suffix)
+
def sdmmc(bankspec, suffix, offs, bank, mux=1, spec=None,
- start=None, limit=None):
+ start=None, limit=None):
sdmmcpins = ['CMD+', 'CLK+']
for i in range(4):
sdmmcpins.append("D%d*" % i)
return Pins('SD', sdmmcpins, bankspec, suffix, offs, bank, mux, spec,
origsuffix=suffix)
+
def spi(bankspec, suffix, offs, bank, mux=1, spec=None):
spipins = ['CLK*', 'NSS*', 'MOSI*', 'MISO*']
return Pins('SPI', spipins, bankspec, suffix, offs, bank, mux, spec,
origsuffix=suffix)
+
def quadspi(bankspec, suffix, offs, bank, mux=1, spec=None, limit=None):
spipins = ['CK*', 'NSS*', 'IO0*', 'IO1*', 'IO2*', 'IO3*']
return Pins('QSPI', spipins, bankspec, suffix, offs, bank, mux, spec, limit,
origsuffix=suffix)
+
def i2c(bankspec, suffix, offs, bank, mux=1, spec=None):
spipins = ['SDA*', 'SCL*']
return Pins('TWI', spipins, bankspec, suffix, offs, bank, mux, spec,
origsuffix=suffix)
+
def jtag(bankspec, suffix, offs, bank, mux=1, spec=None):
jtagpins = ['MS+', 'DI-', 'DO+', 'CK+']
return Pins('JTAG', jtagpins, bankspec, suffix, offs, bank, mux, spec,
origsuffix=suffix)
+
def uart(bankspec, suffix, offs, bank, mux=1, spec=None):
uartpins = ['TX+', 'RX-']
return Pins('UART', uartpins, bankspec, suffix, offs, bank, mux, spec,
origsuffix=suffix)
+
def namesuffix(name, suffix, namelist):
names = []
for n in namelist:
names.append("%s_%s" % (name, suffix))
return names
+
def ulpi(bankspec, suffix, offs, bank, mux=1, spec=None):
ulpipins = ['CK+', 'DIR+', 'STP+', 'NXT+']
for i in range(8):
return Pins('ULPI', ulpipins, bankspec, suffix, offs, bank, mux, spec,
origsuffix=suffix)
+
def uartfull(bankspec, suffix, offs, bank, mux=1, spec=None):
uartpins = ['TX+', 'RX-', 'CTS-', 'RTS+']
return Pins('UARTQ', uartpins, bankspec, suffix, offs, bank, mux, spec,
origsuffix=suffix)
+
def rgbttl(bankspec, suffix, offs, bank, mux=1, spec=None):
ttlpins = ['CK+', 'DE+', 'HS+', 'VS+']
for i in range(24):
return Pins('LCD', ttlpins, bankspec, suffix, offs, bank, mux, spec,
origsuffix=suffix)
+
def rgmii(bankspec, suffix, offs, bank, mux=1, spec=None):
buspins = []
for i in range(4):
return Pins('RG', buspins, bankspec, suffix, offs, bank, mux, spec,
origsuffix=suffix)
+
def flexbus1(bankspec, suffix, offs, bank, mux=1, spec=None, limit=None):
buspins = []
for i in range(8):
'TSIZ0', 'TSIZ1']
for i in range(4):
buspins.append("BWE%d" % i)
- for i in range(2,6):
+ for i in range(2, 6):
buspins.append("CS%d+" % i)
return Pins('FB', buspins, bankspec, suffix, offs, bank, mux, spec, limit,
origsuffix=suffix)
+
def flexbus2(bankspec, suffix, offs, bank, mux=1, spec=None, limit=None):
buspins = []
- for i in range(8,32):
+ for i in range(8, 32):
buspins.append("AD%d*" % i)
return Pins('FB', buspins, bankspec, suffix, offs, bank, mux, spec, limit,
origsuffix=suffix)
+
def sdram1(bankspec, suffix, offs, bank, mux=1, spec=None):
buspins = []
for i in range(16):
return Pins('SDR', buspins, bankspec, suffix, offs, bank, mux, spec,
origsuffix=suffix)
+
def sdram2(bankspec, suffix, offs, bank, mux=1, spec=None, limit=None):
buspins = []
- for i in range(3,6):
+ for i in range(3, 6):
buspins.append("SDRCS%d#+" % i)
- for i in range(8,32):
+ for i in range(8, 32):
buspins.append("SDRDQ%d*" % i)
return Pins('SDR', buspins, bankspec, suffix, offs, bank, mux, spec, limit,
origsuffix=suffix)
+
def mcu8080(bankspec, suffix, offs, bank, mux=1, spec=None):
buspins = []
for i in range(8):
return Pins('MCU', buspins, bankspec, suffix, offs, bank, mux, spec,
origsuffix=suffix)
+
def _pinbank(bankspec, prefix, suffix, offs, bank, gpiooffs, gpionum=1, mux=1,
spec=None):
gpiopins = []
return Pins('GPIO', gpiopins, bankspec, suffix, offs, bank, mux, spec,
origsuffix=suffix)
+
def eint(bankspec, suffix, offs, bank, gpiooffs, gpionum=1, mux=1, spec=None):
gpiopins = []
for i in range(gpiooffs, gpiooffs+gpionum):
return Pins('EINT', gpiopins, bankspec, suffix, offs, bank, mux, spec,
origsuffix=suffix)
+
def pwm(bankspec, suffix, offs, bank, mux=1, spec=None):
return Pins('PWM', ['+', ], bankspec, suffix, offs, bank, mux, spec,
origsuffix=suffix)
+
def gpio(bankspec, suffix, offs, bank, gpiooffs, gpionum=1, mux=1, spec=None):
return _pinbank(bankspec, "GPIO", suffix, offs, bank, gpiooffs,
gpionum, mux=0, spec=None)
+
def pinmerge(pins, fn):
# hack, store the function specs in the pins dict
fname = fn.fname
specname = fname + bank
pins.fnspec[fname][specname] = fn
-
# merge actual pins
for (pinidx, v) in fn.pins.items():
print "pinidx", pinidx
pins.update(pinidx, v)
-
from ifaceprint import display, display_fns, check_functions
from ifaceprint import display_fixed
+
def pinspec():
pinouts = Pinouts()
'E': 24,
'F': 10,
'G': 32,
- }
+ }
bankspec = {}
pkeys = pinbanks.keys()
pkeys.sort()
print
fixedpins = {
- 'DDR3':
+ 'DDR3':
['SDQ0', 'SDQ1', 'SDQ2', 'SDQ3', 'SDQ4', 'SDQ5', 'SDQ6', 'SDQ7',
'SDQ8', 'SDQ9', 'SDQ10', 'SDQ11', 'SDQ12', 'SDQ13', 'SDQ14', 'SDQ15',
'SDQ16', 'SDQ17', 'SDQ18', 'SDQ19', 'SDQ20', 'SDQ21', 'SDQ22', 'SDQ23',
'SZQ', 'SRST',
'SDBG0', 'SDBG1', 'ADBG',
'ODT0', 'ODT1'
- ],
+ ],
- 'CTRL_SYS':
+ 'CTRL_SYS':
[
- 'TEST', 'JTAG_SEL', 'UBOOT_SEL',
- 'NMI#', 'RESET#',
- 'CLK24M_IN', 'CLK24M_OUT',
- 'PLLTEST', 'PLLREGIO', 'PLLVP25',
- 'PLLDV', 'PLLVREG', 'PLLGND',
- ],
-
- 'POWER_DRAM':
- ['VCC0_DRAM', 'VCC1_DRAM', 'VCC2_DRAM', 'VCC3_DRAM', 'VCC4_DRAM',
- 'VCC5_DRAM', 'VCC6_DRAM', 'VCC7_DRAM', 'VCC8_DRAM', 'VCC9_DRAM',
- 'GND0_DRAM', 'GND1_DRAM', 'GND2_DRAM', 'GND3_DRAM', 'GND4_DRAM',
- 'GND5_DRAM', 'GND6_DRAM', 'GND7_DRAM', 'GND8_DRAM', 'GND9_DRAM',
+ 'TEST', 'JTAG_SEL', 'UBOOT_SEL',
+ 'NMI#', 'RESET#',
+ 'CLK24M_IN', 'CLK24M_OUT',
+ 'PLLTEST', 'PLLREGIO', 'PLLVP25',
+ 'PLLDV', 'PLLVREG', 'PLLGND',
],
- 'POWER_CPU':
+ 'POWER_DRAM':
+ ['VCC0_DRAM', 'VCC1_DRAM', 'VCC2_DRAM', 'VCC3_DRAM', 'VCC4_DRAM',
+ 'VCC5_DRAM', 'VCC6_DRAM', 'VCC7_DRAM', 'VCC8_DRAM', 'VCC9_DRAM',
+ 'GND0_DRAM', 'GND1_DRAM', 'GND2_DRAM', 'GND3_DRAM', 'GND4_DRAM',
+ 'GND5_DRAM', 'GND6_DRAM', 'GND7_DRAM', 'GND8_DRAM', 'GND9_DRAM',
+ ],
+
+ 'POWER_CPU':
['VDD0_CPU', 'VDD1_CPU', 'VDD2_CPU', 'VDD3_CPU', 'VDD4_CPU', 'VDD5_CPU',
'GND0_CPU', 'GND1_CPU', 'GND2_CPU', 'GND3_CPU', 'GND4_CPU', 'GND5_CPU',
- ],
+ ],
- 'POWER_DLL':
- ['VDD0_DLL', 'VDD1_DLL', 'VDD2_DLL',
- 'GND0_DLL', 'GND1_DLL', 'GND2_DLL',
- ],
+ 'POWER_DLL':
+ ['VDD0_DLL', 'VDD1_DLL', 'VDD2_DLL',
+ 'GND0_DLL', 'GND1_DLL', 'GND2_DLL',
+ ],
- 'POWER_INT':
- ['VDD0_INT', 'VDD1_INT', 'VDD2_INT', 'VDD3_INT', 'VDD4_INT',
- 'VDD5_INT', 'VDD6_INT', 'VDD7_INT', 'VDD8_INT', 'VDD9_INT',
- 'GND0_INT', 'GND1_INT', 'GND2_INT', 'GND3_INT', 'GND4_INT',
- 'GND5_INT', 'GND6_INT', 'GND7_INT', 'GND8_INT', 'GND9_INT',
- ],
+ 'POWER_INT':
+ ['VDD0_INT', 'VDD1_INT', 'VDD2_INT', 'VDD3_INT', 'VDD4_INT',
+ 'VDD5_INT', 'VDD6_INT', 'VDD7_INT', 'VDD8_INT', 'VDD9_INT',
+ 'GND0_INT', 'GND1_INT', 'GND2_INT', 'GND3_INT', 'GND4_INT',
+ 'GND5_INT', 'GND6_INT', 'GND7_INT', 'GND8_INT', 'GND9_INT',
+ ],
- 'POWER_GPIO':
+ 'POWER_GPIO':
['VDD_GPIOA', 'VDD_GPIOB', 'VDD_GPIOC',
'VDD_GPIOD', 'VDD_GPIOE', 'VDD_GPIOF',
'VDD_GPIOG',
'GND_GPIOA', 'GND_GPIOB', 'GND_GPIOC',
- 'GND_GPIOD', 'GND_GPIOE', 'GND_GPIOF',
+ 'GND_GPIOD', 'GND_GPIOE', 'GND_GPIOF',
'GND_GPIOG',
- ]
+ ]
- }
+ }
display_fixed(fixedpins, len(pinouts))
'ULPI1': 'ULPI (USB Low Pin-count) 1',
'ULPI2': 'ULPI (USB Low Pin-count) 2',
'ULPI3': 'ULPI (USB Low Pin-count) 3',
- }
-
+ }
+
fns = display_fns(bankspec, pinouts, function_names)
print
# of spare GPIO.
eoma68 = ['B1:LCD/22', 'ULPI1/8', 'ULPI2', 'MMC', 'SD1', 'UART3',
- 'TWI3', 'SPI2', 'E2:SD2',]
+ 'TWI3', 'SPI2', 'E2:SD2', ]
eoma68_eint = ['EINT_16', 'EINT_17', 'EINT_18', 'EINT_19']
eoma68_pwm = ['D1:PWM_2']
descriptions = {
- 'MMC': 'internal (on Card)',
- 'SD1': 'user-facing: internal (on Card), multiplexed with JTAG1\n'
- 'and UART2, for debug purposes',
- 'TWI3': 'EOMA68-compliance: must be entirely free of devices.\n'
- 'Address 0x51 used (externally) for EOMA68 EEPROM Id',
- 'E2:SD2': 'EOMA68-compliance',
- 'SPI2': 'EOMA68-compliance',
- 'UART3': 'EOMA68-compliance',
- 'B1:LCD/22': 'EOMA68-compliance, 18-bit RGB/TTL LCD',
- 'ULPI1/8': 'user-facing: internal (on Card), USB-OTG ULPI PHY',
- 'ULPI2': 'EOMA68-compliance: dual USB2 Host ULPI PHY'
+ 'MMC': 'internal (on Card)',
+ 'SD1': 'user-facing: internal (on Card), multiplexed with JTAG1\n'
+ 'and UART2, for debug purposes',
+ 'TWI3': 'EOMA68-compliance: must be entirely free of devices.\n'
+ 'Address 0x51 used (externally) for EOMA68 EEPROM Id',
+ 'E2:SD2': 'EOMA68-compliance',
+ 'SPI2': 'EOMA68-compliance',
+ 'UART3': 'EOMA68-compliance',
+ 'B1:LCD/22': 'EOMA68-compliance, 18-bit RGB/TTL LCD',
+ 'ULPI1/8': 'user-facing: internal (on Card), USB-OTG ULPI PHY',
+ 'ULPI2': 'EOMA68-compliance: dual USB2 Host ULPI PHY'
}
unused_pins = check_functions("EOMA68", bankspec, fns, pinouts,
- eoma68, eoma68_eint, eoma68_pwm,
- descriptions)
+ eoma68, eoma68_eint, eoma68_pwm,
+ descriptions)
# Industrial scenario. not totally complete (some GPIO needed for PMIC)
# One interface to be connected to the MCU to give RTC, boot/dbg,
# QSPI could be used in 1-bit (MOSI/MISO) mode (freeing up 2 more).
industrial = ['D1:FB/17', 'E1:FB/8', 'B1:LCD/22', 'ULPI1/8', 'ULPI2/8',
- 'MMC', 'B2:SD1',
- 'JTAG1', 'A3:UART2', 'E2:UART1', 'C3:UART0',
- 'F2:TWI1', 'D2:TWI2', 'D2:TWI3', 'SPI2', 'QSPI', 'F2:SD3']
+ 'MMC', 'B2:SD1',
+ 'JTAG1', 'A3:UART2', 'E2:UART1', 'C3:UART0',
+ 'F2:TWI1', 'D2:TWI2', 'D2:TWI3', 'SPI2', 'QSPI', 'F2:SD3']
industrial_pwm = ['F2:PWM_0', 'F2:PWM_1', 'D1:PWM_2']
industrial_eint = ['EINT_24', 'EINT_25', 'EINT_26', 'EINT_27',
'EINT_20', 'EINT_21', 'EINT_22', 'EINT_23']
unused_pins = check_functions("Industrial", bankspec, fns, pinouts,
- industrial, industrial_eint, industrial_pwm)
+ industrial, industrial_eint, industrial_pwm)
# Industrial scenario, using an SPI-based LCD instead of RGB/TTL
# not totally complete (some GPIO needed for PMIC)
# also possibility of freeing up FlexBus CS# with a little reorg.
industrial = ['D1:FB/17', 'E1:FB/8', 'B2:SPI1', 'ULPI1/8', 'ULPI2/8',
- 'MMC', 'B2:SD1',
- 'JTAG1',
- 'A3:UART2', 'E2:UART1', 'C3:UART0', 'B2:UART4', 'B2:UART3',
- 'F2:TWI1', 'D2:TWI2', 'D2:TWI3', 'SPI2', 'QSPI', 'F2:SD3']
+ 'MMC', 'B2:SD1',
+ 'JTAG1',
+ 'A3:UART2', 'E2:UART1', 'C3:UART0', 'B2:UART4', 'B2:UART3',
+ 'F2:TWI1', 'D2:TWI2', 'D2:TWI3', 'SPI2', 'QSPI', 'F2:SD3']
industrial_pwm = ['F2:PWM_0', 'F2:PWM_1', 'D1:PWM_2']
industrial_eint = ['EINT_24', 'EINT_25', 'EINT_26', 'EINT_27',
'EINT_20', 'EINT_21', 'EINT_22', 'EINT_23']
ind_descriptions = {
- 'B2:SPI1': 'Used for 320x240 or 640x480 etc. SPI-based LCD.\n'
- 'Frees up large numbers of GPIO from RGB/TTL bank'
+ 'B2:SPI1': 'Used for 320x240 or 640x480 etc. SPI-based LCD.\n'
+ 'Frees up large numbers of GPIO from RGB/TTL bank'
}
unused_pins = check_functions("Industrial with SPI-LCD",
- bankspec, fns, pinouts,
- industrial, industrial_eint, industrial_pwm,
- ind_descriptions)
+ bankspec, fns, pinouts,
+ industrial, industrial_eint, industrial_pwm,
+ ind_descriptions)
# Smartphone / Tablet - basically the same thing
tablet = ['B1:LCD/22', 'ULPI1/8', 'ULPI2/8',
- 'MMC', 'SD1',
- 'F1:IIS', # I2C Audio
- 'TWI2', # I2C Audio
- 'E2:UART1', # WIFI/BT
- 'E2:SD2', # WIFI
- 'C3:UART0', # GPS
- 'D2:UART3',
- 'D2:UART4',
+ 'MMC', 'SD1',
+ 'F1:IIS', # I2C Audio
+ 'TWI2', # I2C Audio
+ 'E2:UART1', # WIFI/BT
+ 'E2:SD2', # WIFI
+ 'C3:UART0', # GPS
+ 'D2:UART3',
+ 'D2:UART4',
'D3:TWI1', 'D2:TWI3', 'SPI2', 'QSPI']
- tablet_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
+ tablet_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
'F2:PWM_1', 'D1:PWM_2']
- tablet_eint = ['EINT_24', # BT_HOST_WAKE
- 'EINT_25', # WIFI_HOST_WAKE
- 'EINT_26', # CTP_INT
- 'EINT_27', # GSENSOR_INT
- 'EINT_8', # GPS_INT
- 'EINT_7', # TILT_SENSOR_INT
- 'EINT_22', # COMPASS_INT
- 'EINT_23', # MCU_INT
- 'EINT_16', # PMIC_INT
- 'EINT_17', # PWR_BUTTON_INT
- 'EINT_30', # OTG_ID
- 'EINT_31',
- ]
+ tablet_eint = ['EINT_24', # BT_HOST_WAKE
+ 'EINT_25', # WIFI_HOST_WAKE
+ 'EINT_26', # CTP_INT
+ 'EINT_27', # GSENSOR_INT
+ 'EINT_8', # GPS_INT
+ 'EINT_7', # TILT_SENSOR_INT
+ 'EINT_22', # COMPASS_INT
+ 'EINT_23', # MCU_INT
+ 'EINT_16', # PMIC_INT
+ 'EINT_17', # PWR_BUTTON_INT
+ 'EINT_30', # OTG_ID
+ 'EINT_31',
+ ]
descriptions = {
'B1:LCD/22':
- 'RGB/TTL LCD, 800x480 or use SN75LVDS83b for up to 1440x900',
+ 'RGB/TTL LCD, 800x480 or use SN75LVDS83b for up to 1440x900',
'MMC': 'eMMC: main internal storage',
'ULPI1/8': 'USB-OTG, connect to ULPI OTG PHY (for charging)\n'
'as well as USB Host or USB Device',
'ULPI2/8': 'USB2 Host, connect to ULPI PHY w/and 4-port USB2 Hub\n'
- 'for example GL850G or FE1.1. '
- 'Connects to 2/3/4G/LTE Modem, 2x USB-Camera (VC0345)',
+ 'for example GL850G or FE1.1. '
+ 'Connects to 2/3/4G/LTE Modem, 2x USB-Camera (VC0345)',
'SD1': 'internal, multiplexed with JTAG1\n'
'and UART2, for debug purposes',
'F1:IIS': 'I2C Audio, connect to AC97 Audio IC',
'EINT_31': 'Spare?',
}
unused_pins = check_functions("Smartphone / Tablet",
- bankspec, fns, pinouts,
- tablet, tablet_eint, tablet_pwm,
- descriptions)
+ bankspec, fns, pinouts,
+ tablet, tablet_eint, tablet_pwm,
+ descriptions)
# Laptop
laptop = ['D1:FB/17', 'E1:FB/8', 'B1:LCD/22', 'ULPI1/8', 'ULPI2/8',
- 'MMC', 'SD1',
- 'F1:IIS', # I2C Audio
- 'TWI2', # I2C Audio
- 'E2:UART1', # WIFI/BT
- 'E2:SD3', # WIFI
+ 'MMC', 'SD1',
+ 'F1:IIS', # I2C Audio
+ 'TWI2', # I2C Audio
+ 'E2:UART1', # WIFI/BT
+ 'E2:SD3', # WIFI
'D2:TWI3', 'QSPI']
- laptop_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
- ]
- laptop_eint = ['EINT_20', # BT_HOST_WAKE
- 'EINT_21', # WIFI_HOST_WAKE
- 'EINT_9', # MCU_INT
- 'EINT_31', # PMIC_INT
- ]
+ laptop_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
+ ]
+ laptop_eint = ['EINT_20', # BT_HOST_WAKE
+ 'EINT_21', # WIFI_HOST_WAKE
+ 'EINT_9', # MCU_INT
+ 'EINT_31', # PMIC_INT
+ ]
descriptions = {
'D1:FB/17': 'FlexBus. Connect to DM9000 or AX99896A MCU-style Bus\n'
'10/100 Ethernet PHY.',
'E1:FB/8': 'FlexBus bus bits 8-15, needed to make a 16-bit bus width',
'B1:LCD/22':
- 'RGB/TTL LCD, use SN75LVDS83b for LVDS or SSD2828 for MIPI,\n'
- 'or a Chrontel CH7039, CH7038, CH7034 or CH7018 for dual\n'
- 'display output (eDP/LVDS and HDMI/VGA) '
- 'conversion.',
+ 'RGB/TTL LCD, use SN75LVDS83b for LVDS or SSD2828 for MIPI,\n'
+ 'or a Chrontel CH7039, CH7038, CH7034 or CH7018 for dual\n'
+ 'display output (eDP/LVDS and HDMI/VGA) '
+ 'conversion.',
'MMC': 'eMMC: main internal storage',
'ULPI1/8': 'USB-OTG, connect to ULPI OTG PHY (for charging)\n'
'as well as USB Host or USB Device',
'EINT_31': 'PMIC_INT',
}
unused_pins = check_functions("Laptop / Netbook",
- bankspec, fns, pinouts,
- laptop, laptop_eint, laptop_pwm,
- descriptions)
+ bankspec, fns, pinouts,
+ laptop, laptop_eint, laptop_pwm,
+ descriptions)
# IoT
iot = ['B1:LCD', 'ULPI2/8', 'ULPI1/8',
- 'MMC', 'SD1',
- 'F1:IIS', # I2C Audio
- #'TWI2', # I2C Audio
- 'C3:UART0', # HSPA UART
- 'E2:UART1', # BT UART
- 'C2:SPI2', # HSPI SPI
- 'E2:SD3', # WIFI
- 'D3:TWI1', # sensors CTP,
- 'D2:TWI3', 'QSPI']
- iot_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
- ]
- iot_eint = [ 'EINT_5', # 'HSPA_MST_RDY',
- 'EINT_6', # 'HSPA_SL_RDY',
- 'EINT_7', # 'HSPA_RING',
- 'EINT_8', # 'WL_PMU_EN',
- 'EINT_9', # HSPA_GPIO1
- 'EINT_10', # IR_DT
- 'EINT_11', # 'BT_PCM_CLK',
- 'EINT_12', # 'BT_PCM_DIN',
- 'EINT_13', # 'BT_PCM_SYNC',
- 'EINT_14', # 'BT_PCM_DOUT',
- 'EINT_16', # 'USB_DRVVBUS',
- 'EINT_17', # 'USB_VBUSDET',
- 'EINT_21', # 'USB_ID',
- 'EINT_30', # 'CTP_INT',
- 'EINT_31', # 'SD_DET#',
+ 'MMC', 'SD1',
+ 'F1:IIS', # I2C Audio
+ #'TWI2', # I2C Audio
+ 'C3:UART0', # HSPA UART
+ 'E2:UART1', # BT UART
+ 'C2:SPI2', # HSPI SPI
+ 'E2:SD3', # WIFI
+ 'D3:TWI1', # sensors CTP,
+ 'D2:TWI3', 'QSPI']
+ iot_pwm = ['F2:PWM_0', # LCD_BACKLIGHT
+ ]
+ iot_eint = ['EINT_5', # 'HSPA_MST_RDY',
+ 'EINT_6', # 'HSPA_SL_RDY',
+ 'EINT_7', # 'HSPA_RING',
+ 'EINT_8', # 'WL_PMU_EN',
+ 'EINT_9', # HSPA_GPIO1
+ 'EINT_10', # IR_DT
+ 'EINT_11', # 'BT_PCM_CLK',
+ 'EINT_12', # 'BT_PCM_DIN',
+ 'EINT_13', # 'BT_PCM_SYNC',
+ 'EINT_14', # 'BT_PCM_DOUT',
+ 'EINT_16', # 'USB_DRVVBUS',
+ 'EINT_17', # 'USB_VBUSDET',
+ 'EINT_21', # 'USB_ID',
+ 'EINT_30', # 'CTP_INT',
+ 'EINT_31', # 'SD_DET#',
]
descriptions = {
'B1:LCD':
- 'RGB/TTL LCD, use SN75LVDS83b for LVDS or SSD2828 for MIPI,\n'
- 'or a Chrontel CH7039, CH7038, CH7034 or CH7018 for dual\n'
- 'display output (eDP/LVDS and HDMI/VGA) '
- 'conversion.',
+ 'RGB/TTL LCD, use SN75LVDS83b for LVDS or SSD2828 for MIPI,\n'
+ 'or a Chrontel CH7039, CH7038, CH7034 or CH7018 for dual\n'
+ 'display output (eDP/LVDS and HDMI/VGA) '
+ 'conversion.',
'MMC': 'eMMC: main internal storage',
'F1:IIS': 'I2C Audio, connect to AC97 Audio IC',
'ULPI2/8': 'USB-OTG, connect to ULPI OTG PHY (for charging)\n'
'EINT_31': 'SD_DETN',
}
unused_pins = check_functions("IoT",
- bankspec, fns, pinouts,
- iot, iot_eint, iot_pwm,
- descriptions)
+ bankspec, fns, pinouts,
+ iot, iot_eint, iot_pwm,
+ descriptions)
print "# Reference Datasheets"
print
projects / pinmux.git / commitdiff