#!/usr/bin/env python
-from spec.interfaces import Pinouts
-
-from spec.ifaceprint import display, display_fns, check_functions
-from spec.ifaceprint import display_fixed
-
+from spec.base import PinSpec
def pinspec(of):
pinbanks = {'A': 16,
'F': 10,
'G': 32,
}
- bankspec = {}
- pkeys = sorted(pinbanks.keys())
- offs = 0
- for kn in pkeys:
- bankspec[kn] = offs
- offs += pinbanks[kn]
-
- pinouts = Pinouts(bankspec)
-
- # Bank A, 0-15
- pinouts.gpio("", ('A', 0), "A", 0, 0, 16)
- pinouts.spi("0", ('A', 0), "A", 3)
- pinouts.uartfull("1", ('A', 0), "A", 2)
- pinouts.i2c("0", ('A', 4), "A", 2)
- pinouts.emmc("", ('A', 0), "A", 1)
- #pinouts.uart("0", ('A', 14), "A", 1)
- pinouts.spi("1", ('A', 6), "A", 2)
- pinouts.eint("", ('A', 10), "A", 1, start=0, limit=6)
- pinouts.eint("", ('A', 4), "A", 3, start=0, limit=6)
- pinouts.sdmmc("0", ('A', 10), "A", 2)
- pinouts.jtag("0", ('A', 10), "A", 3)
- pinouts.uart("0", ('A', 14), "A", 3)
-
- # Bank B, 16-47
- pinouts.gpio("", ('B', 0), "B", 0, 0, 28)
- pinouts.rgbttl("0", ('B', 0), "B", 1)
- pinouts.spi("0", ('B', 12), "B", 2)
- pinouts.quadspi("", ('B', 4), "B", 2, limit=4)
- pinouts.uart("1", ('B', 16), "B", 2)
- pinouts.i2c("2", ('B', 18), "B", 2)
- pinouts.pwm("", ('B', 9), "B", 2, start=0, limit=1)
- pinouts.pwm("", ('B', 20), "B", 2, start=1, limit=2)
- pinouts.sdmmc("0", ('B', 22), "B", 2)
- pinouts.eint("", ('B', 0), "B", 3, start=6, limit=4)
- pinouts.flexbus2("", ('B', 4), "B", 3)
- pinouts.i2c("0", ('B', 0), "B", 2)
- pinouts.uart("0", ('B', 2), "B", 2)
- pinouts.uart("2", ('B', 10), "B", 2)
-
- # Bank C, 48-71
- pinouts.gpio("", ("C", 0), "C", 0, 0, 24)
- pinouts.ulpi("0", ('C', 0), "C", 1)
- pinouts.ulpi("1", ('C', 12), "C", 1)
- pinouts.spi("1", ('C', 8), "C", 2)
- #pinouts.spi("1", ('C', 28), "C", 2)
- pinouts.uartfull("0", ('C', 20), "C", 3)
- pinouts.eint("", ('C', 0), "C", 3, start=10, limit=8)
- pinouts.jtag("1", ('C', 8), "C", 3)
- pinouts.eint("", ('C', 12), "C", 3, start=22, limit=8)
- pinouts.uart("0", ('C', 22), "C", 2)
- pinouts.i2s("", ('C', 13), "C", 2)
- pinouts.pwm("", ('C', 21), "C", 2, start=2, limit=1)
-
- # Bank D, 72-96
-
- # ok this is slightly complicated, basically there's extra
- # functions that we want to be on the same pin (but a different mux)
- # because their use is mutually-exclusive. you can't have FB_TS
- # at the same time as FB_ALE for example. FB_BWE2 even has two
- # mutually exclusive functions. these extra functions are
- # specified here, so that when e.g. FB_BWE2 has been positioned,
- # FB_A0 will be placed in bank d, mux column 3, *on the same pin*.
- # this saves messing about, because if FB_BWE2 moved to a
- # different pin so would FB_A0 (and FB_CS2) likewise have to be
- # moved. and the rest.
- flexspec = {
- 'FB_TS': ('FB_ALE', 2, "D"),
- 'FB_CS2': ('FB_BWE2', 2, "D"),
- 'FB_A0': ('FB_BWE2', 3, "D"),
- 'FB_CS3': ('FB_BWE3', 2, "D"),
- 'FB_A1': ('FB_BWE3', 3, "D"),
- 'FB_TBST': ('FB_OE', 2, "D"),
- 'FB_TSIZ0': ('FB_BWE0', 2, "D"),
- 'FB_TSIZ1': ('FB_BWE1', 2, "D"),
- }
- #pinouts.mcu8080("", 72, "D", 1)
- pinouts.gpio("", ('D', 0), "D", 0, 0, 24)
- pinouts.flexbus1("", ('D', 0), "D", 1, spec=flexspec)
- pinouts.i2c("1", ('D', 8), "D", 3)
- pinouts.pwm("", ('D', 21), "D", 1, start=0, limit=3)
- pinouts.i2c("0", ('D', 10), "D", 3)
- pinouts.i2c("2", ('D', 19), "D", 2)
- pinouts.uartfull("0", ('D', 0), "D", 2)
- pinouts.uart("1", ('D', 21), "D", 2)
- pinouts.uart("2", ('D', 13), "D", 2)
- pinouts.eint("", ('D', 19), "D", 3, start=18, limit=4)
- pinouts.eint("", ('D', 23), "D", 3, start=9, limit=1)
- pinouts.eint("", ('D', 13), "D", 3, start=5, limit=4)
- pinouts.eint("", ('D', 0), "D", 3, start=30, limit=2)
- pinouts.i2c("1", ('D', 2), "D", 3)
- pinouts.sdmmc("1", ('D', 4), "D", 2)
-
- # Bank E
- pinouts.gpio("", ('E', 0), "E", 0, 0, 24)
- pinouts.flexbus2("", ('E', 0), "E", 1)
- pinouts.sdmmc("1", ('E', 0), "E", 2)
- pinouts.sdmmc("2", ('E', 8), "E", 2)
- pinouts.quadspi("", ('E', 18), "E", 2)
- pinouts.uartfull("1", ('E', 14), "E", 2)
- pinouts.i2c("1", ('E', 6), "E", 2)
- pinouts.eint("", ('E', 0), "E", 3, start=10, limit=8)
- pinouts.eint("", ('E', 8), "E", 3, start=22, limit=6)
- pinouts.emmc("", ('E', 14), "E", 3)
-
- # Bank F
- pinouts.gpio("", ('F', 0), "F", 0, 0, 10)
- pinouts.i2s("", ('F', 0), "F", 1)
- pinouts.i2c("0", ('F', 6), "F", 2)
- pinouts.pwm("", ('F', 8), "F", 2, start=0, limit=1)
- pinouts.pwm("", ('F', 9), "F", 2, start=1, limit=1)
- pinouts.uart("2", ('F', 8), "F", 1)
- pinouts.sdmmc("2", ('F', 0), "F", 2)
- pinouts.eint("", ('F', 0), "F", 3, start=18, limit=4)
- pinouts.pwm("", ('F', 4), "F", 3, start=2, limit=1)
- pinouts.eint("", ('F', 5), "F", 3, start=7, limit=1)
- pinouts.eint("", ('F', 6), "F", 3, start=28, limit=4)
-
- # Bank G
- pinouts.gpio("", ('G', 0), "G", 0, 0, 32)
- pinouts.rgmii("", ('G', 0), "G", 1)
- pinouts.ulpi("2", ('G', 20), "G", 1)
- pinouts.rgbttl("1", ('G', 0), "G", 2)
- pinouts.quadspi("", ('G', 26), "G", 3)
- pinouts.flexbus2("", ('G', 0), "G", 3)
- pinouts.sdmmc("1", ('G', 24), "G", 3, limit=2)
- pinouts.sdmmc("1", ('G', 28), "G", 2, start=2)
-
- of.write ("""# Pinouts (PinMux)
-auto-generated by [[pinouts.py]]
-
-[[!toc ]]
-
-""")
- display(of, pinouts)
-
- of.write ("\n# Pinouts (Fixed function)\n\n")
-
fixedpins = {
'DDR3': [
'SDQ0',
'GND_GPIOG',
]}
- fixedpins = display_fixed(of, fixedpins, len(pinouts))
-
- of.write ("""# Functions (PinMux)
-
-auto-generated by [[pinouts.py]]
-
-""")
-
function_names = {'EINT': 'External Interrupt',
'FB': 'MC68k FlexBus',
'IIS': 'I2S Audio',
'ULPI2': 'ULPI (USB Low Pin-count) 3',
}
- fns = display_fns(of, bankspec, pinouts, function_names)
- of.write('\n')
+ ps = PinSpec(pinbanks, fixedpins, function_names)
- # Scenarios below can be spec'd out as either "find first interface"
- # by name/number e.g. SPI0, or as "find in bank/mux" which must be
- # spec'd as "BM:Name" where B is bank (A-F), M is Mux (0-3)
- # EINT and PWM are grouped together, specially, but may still be spec'd
- # using "BM:Name". Pins are removed in-order as listed from
- # lists (interfaces, EINTs, PWMs) from available pins.
+ # Bank A, 0-15
+ ps.gpio("", ('A', 0), "A", 0, 0, 16)
+ ps.spi("0", ('A', 0), "A", 3)
+ ps.uartfull("1", ('A', 0), "A", 2)
+ ps.i2c("0", ('A', 4), "A", 2)
+ ps.emmc("", ('A', 0), "A", 1)
+ #ps.uart("0", ('A', 14), "A", 1)
+ ps.spi("1", ('A', 6), "A", 2)
+ ps.eint("", ('A', 10), "A", 1, start=0, limit=6)
+ ps.eint("", ('A', 4), "A", 3, start=0, limit=6)
+ ps.sdmmc("0", ('A', 10), "A", 2)
+ ps.jtag("0", ('A', 10), "A", 3)
+ ps.uart("0", ('A', 14), "A", 3)
+
+ # Bank B, 16-47
+ ps.gpio("", ('B', 0), "B", 0, 0, 28)
+ ps.rgbttl("0", ('B', 0), "B", 1)
+ ps.spi("0", ('B', 12), "B", 2)
+ ps.quadspi("", ('B', 4), "B", 2, limit=4)
+ ps.uart("1", ('B', 16), "B", 2)
+ ps.i2c("2", ('B', 18), "B", 2)
+ ps.pwm("", ('B', 9), "B", 2, start=0, limit=1)
+ ps.pwm("", ('B', 20), "B", 2, start=1, limit=2)
+ ps.sdmmc("0", ('B', 22), "B", 2)
+ ps.eint("", ('B', 0), "B", 3, start=6, limit=4)
+ ps.flexbus2("", ('B', 4), "B", 3)
+ ps.i2c("0", ('B', 0), "B", 2)
+ ps.uart("0", ('B', 2), "B", 2)
+ ps.uart("2", ('B', 10), "B", 2)
+
+ # Bank C, 48-71
+ ps.gpio("", ("C", 0), "C", 0, 0, 24)
+ ps.ulpi("0", ('C', 0), "C", 1)
+ ps.ulpi("1", ('C', 12), "C", 1)
+ ps.spi("1", ('C', 8), "C", 2)
+ #ps.spi("1", ('C', 28), "C", 2)
+ ps.uartfull("0", ('C', 20), "C", 3)
+ ps.eint("", ('C', 0), "C", 3, start=10, limit=8)
+ ps.jtag("1", ('C', 8), "C", 3)
+ ps.eint("", ('C', 12), "C", 3, start=22, limit=8)
+ ps.uart("0", ('C', 22), "C", 2)
+ ps.i2s("", ('C', 13), "C", 2)
+ ps.pwm("", ('C', 21), "C", 2, start=2, limit=1)
+
+ # Bank D, 72-96
+
+ # ok this is slightly complicated, basically there's extra
+ # functions that we want to be on the same pin (but a different mux)
+ # because their use is mutually-exclusive. you can't have FB_TS
+ # at the same time as FB_ALE for example. FB_BWE2 even has two
+ # mutually exclusive functions. these extra functions are
+ # specified here, so that when e.g. FB_BWE2 has been positioned,
+ # FB_A0 will be placed in bank d, mux column 3, *on the same pin*.
+ # this saves messing about, because if FB_BWE2 moved to a
+ # different pin so would FB_A0 (and FB_CS2) likewise have to be
+ # moved. and the rest.
+ flexspec = {
+ 'FB_TS': ('FB_ALE', 2, "D"),
+ 'FB_CS2': ('FB_BWE2', 2, "D"),
+ 'FB_A0': ('FB_BWE2', 3, "D"),
+ 'FB_CS3': ('FB_BWE3', 2, "D"),
+ 'FB_A1': ('FB_BWE3', 3, "D"),
+ 'FB_TBST': ('FB_OE', 2, "D"),
+ 'FB_TSIZ0': ('FB_BWE0', 2, "D"),
+ 'FB_TSIZ1': ('FB_BWE1', 2, "D"),
+ }
+ #ps.mcu8080("", 72, "D", 1)
+ ps.gpio("", ('D', 0), "D", 0, 0, 24)
+ ps.flexbus1("", ('D', 0), "D", 1, spec=flexspec)
+ ps.i2c("1", ('D', 8), "D", 3)
+ ps.pwm("", ('D', 21), "D", 1, start=0, limit=3)
+ ps.i2c("0", ('D', 10), "D", 3)
+ ps.i2c("2", ('D', 19), "D", 2)
+ ps.uartfull("0", ('D', 0), "D", 2)
+ ps.uart("1", ('D', 21), "D", 2)
+ ps.uart("2", ('D', 13), "D", 2)
+ ps.eint("", ('D', 19), "D", 3, start=18, limit=4)
+ ps.eint("", ('D', 23), "D", 3, start=9, limit=1)
+ ps.eint("", ('D', 13), "D", 3, start=5, limit=4)
+ ps.eint("", ('D', 0), "D", 3, start=30, limit=2)
+ ps.i2c("1", ('D', 2), "D", 3)
+ ps.sdmmc("1", ('D', 4), "D", 2)
+
+ # Bank E
+ ps.gpio("", ('E', 0), "E", 0, 0, 24)
+ ps.flexbus2("", ('E', 0), "E", 1)
+ ps.sdmmc("1", ('E', 0), "E", 2)
+ ps.sdmmc("2", ('E', 8), "E", 2)
+ ps.quadspi("", ('E', 18), "E", 2)
+ ps.uartfull("1", ('E', 14), "E", 2)
+ ps.i2c("1", ('E', 6), "E", 2)
+ ps.eint("", ('E', 0), "E", 3, start=10, limit=8)
+ ps.eint("", ('E', 8), "E", 3, start=22, limit=6)
+ ps.emmc("", ('E', 14), "E", 3)
+
+ # Bank F
+ ps.gpio("", ('F', 0), "F", 0, 0, 10)
+ ps.i2s("", ('F', 0), "F", 1)
+ ps.i2c("0", ('F', 6), "F", 2)
+ ps.pwm("", ('F', 8), "F", 2, start=0, limit=1)
+ ps.pwm("", ('F', 9), "F", 2, start=1, limit=1)
+ ps.uart("2", ('F', 8), "F", 1)
+ ps.sdmmc("2", ('F', 0), "F", 2)
+ ps.eint("", ('F', 0), "F", 3, start=18, limit=4)
+ ps.pwm("", ('F', 4), "F", 3, start=2, limit=1)
+ ps.eint("", ('F', 5), "F", 3, start=7, limit=1)
+ ps.eint("", ('F', 6), "F", 3, start=28, limit=4)
+
+ # Bank G
+ ps.gpio("", ('G', 0), "G", 0, 0, 32)
+ ps.rgmii("", ('G', 0), "G", 1)
+ ps.ulpi("2", ('G', 20), "G", 1)
+ ps.rgbttl("1", ('G', 0), "G", 2)
+ ps.quadspi("", ('G', 26), "G", 3)
+ ps.flexbus2("", ('G', 0), "G", 3)
+ ps.sdmmc("1", ('G', 24), "G", 3, limit=2)
+ ps.sdmmc("1", ('G', 28), "G", 2, start=2)
# EOMA68 scenario. not totally complete (some GPIO needed for PMIC)
# One interface to be connected to the MCU to give RTC and boot/dbg
'ULPI1': 'EOMA68-compliance: dual USB2 Host ULPI PHY'
}
- unused_pins = check_functions(of, "EOMA68", bankspec, fns, pinouts,
- eoma68, eoma68_eint, eoma68_pwm,
- descriptions)
+ ps.add_scenario("EOMA68", eoma68, eoma68_eint, eoma68_pwm, descriptions)
# Industrial scenario. not totally complete (some GPIO needed for PMIC)
# One interface to be connected to the MCU to give RTC, boot/dbg,
industrial_eint = ['EINT_24', 'EINT_25', 'EINT_26', 'EINT_27',
'EINT_20', 'EINT_21', 'EINT_22', 'EINT_23']
- unused_pins = check_functions(of, "Industrial", bankspec, fns, pinouts,
- industrial, industrial_eint, industrial_pwm)
+ ps.add_scenario("Industrial", industrial, industrial_eint, industrial_pwm, None)
# Industrial scenario, using an SPI-based LCD instead of RGB/TTL
# not totally complete (some GPIO needed for PMIC)
'B2:SPI0': 'Used for 320x240 or 640x480 etc. SPI-based LCD.\n'
'Frees up large numbers of GPIO from RGB/TTL bank'
}
- unused_pins = check_functions(of, "Industrial with SPI-LCD",
- bankspec, fns, pinouts,
- industrial, industrial_eint, industrial_pwm,
- ind_descriptions)
+
+ ps.add_scenario("Industrial with SPI-LCD",
+ industrial, industrial_eint, industrial_pwm,
+ ind_descriptions)
# Smartphone / Tablet - basically the same thing
'EINT_30': 'OTG_ID',
'EINT_31': 'Spare?',
}
- unused_pins = check_functions(of, "Smartphone / Tablet",
- bankspec, fns, pinouts,
+
+ ps.add_scenario("Smartphone / Tablet",
tablet, tablet_eint, tablet_pwm,
descriptions)
'EINT_9': 'MCU_INT',
'EINT_31': 'PMIC_INT',
}
- unused_pins = check_functions(of, "Laptop / Netbook",
- bankspec, fns, pinouts,
+ ps.add_scenario("Laptop / Netbook",
laptop, laptop_eint, laptop_pwm,
descriptions)
'EINT_30': 'CTP_INT',
'EINT_31': 'SD_DETN',
}
- unused_pins = check_functions(of, "IoT",
- bankspec, fns, pinouts,
+ ps.add_scenario( "IoT",
iot, iot_eint, iot_pwm,
descriptions)
- of.write ("""# Reference Datasheets
-
-datasheets and pinout links
-* <http://datasheets.chipdb.org/AMD/8018x/80186/amd-80186.pdf>
-* <http://hands.com/~lkcl/eoma/shenzen/frida/FRD144A2701.pdf>
-* <http://pinouts.ru/Memory/sdcard_pinout.shtml>
-* p8 <http://www.onfi.org/~/media/onfi/specs/onfi_2_0_gold.pdf?la=en>
-* <https://www.heyrick.co.uk/blog/files/datasheets/dm9000aep.pdf>
-* <http://cache.freescale.com/files/microcontrollers/doc/app_note/AN4393.pdf>
-* <https://www.nxp.com/docs/en/data-sheet/MCF54418.pdf>
-* ULPI OTG PHY, ST <http://www.st.com/en/interfaces-and-transceivers/stulpi01a.html>
-* ULPI OTG PHY, TI TUSB1210 <http://ti.com/product/TUSB1210/>
-
-""")
-
- return pinouts, bankspec, pinbanks, fixedpins
+ return ps.write(of)
#!/usr/bin/env python
-from spec.interfaces import Pinouts
+from spec.base import PinSpec
from spec.ifaceprint import display, display_fns, check_functions
from spec.ifaceprint import display_fixed
pinbanks = {
'B': 28,
}
- bankspec = {}
- pkeys = sorted(pinbanks.keys())
- offs = 0
- for kn in pkeys:
- bankspec[kn] = offs
- offs += pinbanks[kn]
-
- pinouts = Pinouts(bankspec)
-
- # Bank B, 16-47
- pinouts.gpio("", ('B', 0), "B", 0, 0, 28)
- pinouts.rgbttl("", ('B', 0), "B", 1, limit=23)
- pinouts.spi("0", ('B', 10), "B", 2)
- pinouts.quadspi("", ('B', 4), "B", 2)
- pinouts.uart("0", ('B', 16), "B", 2)
- pinouts.i2c("2", ('B', 18), "B", 2)
- pinouts.pwm("", ('B', 21), "B", 2, 0, 3)
- pinouts.sdmmc("0", ('B', 22), "B", 3)
- pinouts.eint("", ('B', 0), "B", 3, 0, 4)
- pinouts.eint("", ('B', 20), "B", 2, 4, 1)
- pinouts.eint("", ('B', 23), "B", 1, 5, 1)
- pinouts.sdmmc("1", ('B', 4), "B", 3)
- pinouts.jtag("1", ('B', 10), "B", 3)
- pinouts.uartfull("0", ('B', 14), "B", 3)
- pinouts.uartfull("1", ('B', 18), "B", 3)
- pinouts.jtag("0", ('B', 24), "B", 2)
- pinouts.spi("1", ('B', 24), "B", 1)
- pinouts.i2c("0", ('B', 0), "B", 2)
- pinouts.uart("1", ('B', 2), "B", 2)
- pinouts.uart("2", ('B', 14), "B", 2)
-
- of.write("""# Pinouts (PinMux)
-auto-generated by [[pinouts.py]]
-
-[[!toc ]]
-
-""")
- display(of, pinouts)
-
- of.write("\n# Pinouts (Fixed function)\n\n")
-
fixedpins = {
'CTRL_SYS': [
'TEST',
'VDD_GPIOB',
'GND_GPIOB',
]}
-
- fixedpins = display_fixed(of, fixedpins, len(pinouts))
-
- of.write("""# Functions (PinMux)
-
-auto-generated by [[pinouts.py]]
-
-""")
-
function_names = {'EINT': 'External Interrupt',
'FB': 'MC68k FlexBus',
'IIS': 'I2S Audio',
'ULPI2': 'ULPI (USB Low Pin-count) 2',
}
- fns = display_fns(of, bankspec, pinouts, function_names)
- of.write("\n")
+
+ ps = PinSpec(pinbanks, fixedpins, function_names)
+
+ # Bank B, 16-47
+ ps.gpio("", ('B', 0), "B", 0, 0, 28)
+ ps.rgbttl("", ('B', 0), "B", 1, limit=23)
+ ps.spi("0", ('B', 10), "B", 2)
+ ps.quadspi("", ('B', 4), "B", 2)
+ ps.uart("0", ('B', 16), "B", 2)
+ ps.i2c("2", ('B', 18), "B", 2)
+ ps.pwm("", ('B', 21), "B", 2, 0, 3)
+ ps.sdmmc("0", ('B', 22), "B", 3)
+ ps.eint("", ('B', 0), "B", 3, 0, 4)
+ ps.eint("", ('B', 20), "B", 2, 4, 1)
+ ps.eint("", ('B', 23), "B", 1, 5, 1)
+ ps.sdmmc("1", ('B', 4), "B", 3)
+ ps.jtag("1", ('B', 10), "B", 3)
+ ps.uartfull("0", ('B', 14), "B", 3)
+ ps.uartfull("1", ('B', 18), "B", 3)
+ ps.jtag("0", ('B', 24), "B", 2)
+ ps.spi("1", ('B', 24), "B", 1)
+ ps.i2c("0", ('B', 0), "B", 2)
+ ps.uart("1", ('B', 2), "B", 2)
+ ps.uart("2", ('B', 14), "B", 2)
# Scenarios below can be spec'd out as either "find first interface"
# by name/number e.g. SPI1, or as "find in bank/mux" which must be
'ULPI1': 'dual USB2 Host ULPI PHY'
}
- unused_pins = check_functions(of, "MiniTest", bankspec, fns, pinouts,
- minitest, minitest_eint, minitest_pwm,
- descriptions)
-
- of.write("""# Reference Datasheets
-
-datasheets and pinout links
-* <http://datasheets.chipdb.org/AMD/8018x/80186/amd-80186.pdf>
-* <http://hands.com/~lkcl/eoma/shenzen/frida/FRD144A2701.pdf>
-* <http://pinouts.ru/Memory/sdcard_pinout.shtml>
-* p8 <http://www.onfi.org/~/media/onfi/specs/onfi_2_0_gold.pdf?la=en>
-* <https://www.heyrick.co.uk/blog/files/datasheets/dm9000aep.pdf>
-* <http://cache.freescale.com/files/microcontrollers/doc/app_note/AN4393.pdf>
-* <https://www.nxp.com/docs/en/data-sheet/MCF54418.pdf>
-* ULPI OTG PHY, ST <http://www.st.com/en/interfaces-and-transceivers/stulpi01a.html>
-* ULPI OTG PHY, TI TUSB1210 <http://ti.com/product/TUSB1210/>
-
-""")
+ ps.add_scenario("MiniTest", minitest, minitest_eint, minitest_pwm,
+ descriptions)
- return pinouts, bankspec, pinbanks, fixedpins
+ return ps.write(of)
projects / pinmux.git / commitdiff