freedreno/a6xx: VSC overflow detection/handling
authorRob Clark <robdclark@chromium.org>
Fri, 26 Jul 2019 16:55:14 +0000 (09:55 -0700)
committerRob Clark <robdclark@chromium.org>
Fri, 2 Aug 2019 17:24:14 +0000 (10:24 -0700)
Check VSC_SIZE/VSC_SIZE2 regs from cmdstream to detect overflow, and
skip use of VSC visibility stream when overflow is detected, to avoid
GPU hangs.  This is done w/ introduction of some CP_REG_TEST/
CP_COND_REG_EXEC packet pairs.

In addition, eventually (after a frame or two) detect the condition and
resize the VSC buffers until overflow no longer happens.

Note that this significantly reduces the initial size of the VSC
buffers, backing out a previous hack to make them 16x larger than
what should be typically required (the previous "solution" for
VSC overflow).

Signed-off-by: Rob Clark <robdclark@chromium.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
src/gallium/drivers/freedreno/a6xx/fd6_context.c
src/gallium/drivers/freedreno/a6xx/fd6_context.h
src/gallium/drivers/freedreno/a6xx/fd6_gmem.c

index cb848fc20fc9f73f3babdfb1d88011ff474b707b..f2e8e4eaf3d4ead3c4962ac806c917bcbbee42ae 100644 (file)
@@ -50,8 +50,10 @@ fd6_context_destroy(struct pipe_context *pctx)
 
        fd_context_destroy(pctx);
 
-       fd_bo_del(fd6_ctx->vsc_data);
-       fd_bo_del(fd6_ctx->vsc_data2);
+       if (fd6_ctx->vsc_data)
+               fd_bo_del(fd6_ctx->vsc_data);
+       if (fd6_ctx->vsc_data2)
+               fd_bo_del(fd6_ctx->vsc_data2);
        fd_bo_del(fd6_ctx->control_mem);
 
        fd_context_cleanup_common_vbos(&fd6_ctx->base);
@@ -116,13 +118,11 @@ fd6_context_create(struct pipe_screen *pscreen, void *priv, unsigned flags)
        pctx->delete_rasterizer_state = fd6_rasterizer_state_delete;
        pctx->delete_depth_stencil_alpha_state = fd6_depth_stencil_alpha_state_delete;
 
-       fd6_ctx->vsc_data = fd_bo_new(screen->dev,
-                       (A6XX_VSC_DATA_PITCH * 32) + 0x100,
-                       DRM_FREEDRENO_GEM_TYPE_KMEM, "vsc_data");
-
-       fd6_ctx->vsc_data2 = fd_bo_new(screen->dev,
-                       A6XX_VSC_DATA2_PITCH * 32,
-                       DRM_FREEDRENO_GEM_TYPE_KMEM, "vsc_data2");
+       /* initial sizes for VSC buffers (or rather the per-pipe sizes
+        * which is used to derive entire buffer size:
+        */
+       fd6_ctx->vsc_data_pitch = 0x440;
+       fd6_ctx->vsc_data2_pitch = 0x1040;
 
        fd6_ctx->control_mem = fd_bo_new(screen->dev, 0x1000,
                        DRM_FREEDRENO_GEM_TYPE_KMEM, "control");
index 6a49ec6b80a876830e50f520cac210c2c7217a7d..81a22c44e3d8d4a7d74d2f6d9ff80a6220afc548 100644 (file)
@@ -48,11 +48,7 @@ struct fd6_context {
         */
        struct fd_bo *vsc_data, *vsc_data2;
 
-// TODO annoyingly large sizes to prevent hangs with larger amounts
-// of geometry, like aquarium with max # of fish.  Need to figure
-// out how to calculate the required size.
-#define A6XX_VSC_DATA_PITCH  0x4400
-#define A6XX_VSC_DATA2_PITCH 0x10400
+       unsigned vsc_data_pitch, vsc_data2_pitch;
 
        /* The 'control' mem BO is used for various housekeeping
         * functions.  See 'struct fd6_control'
@@ -113,6 +109,11 @@ struct fd6_control {
        uint32_t _pad0;
        uint32_t flush_base;     /* dummy address for VPC_SO[i].FLUSH_BASE_LO/HI */
        uint32_t _pad1;
+       /* flag set from cmdstream when VSC overflow detected: */
+       volatile uint32_t vsc_overflow;
+       uint32_t _pad2;
+       uint32_t vsc_scratch;
+       uint32_t _pad3;
 };
 
 #define control_ptr(fd6_ctx, member)  \
index a7bbe58bdd1503df1f880faf65bc25700f9c9c26..57f499bbb1885502cad395aeebff59e2438561c0 100644 (file)
@@ -322,6 +322,9 @@ update_render_cntl(struct fd_batch *batch, struct pipe_framebuffer_state *pfb, b
                A6XX_RB_RENDER_CNTL_FLAG_MRTS(mrts_ubwc_enable));
 }
 
+#define VSC_DATA_SIZE(pitch)  ((pitch) * 32 + 0x100)  /* extra size to store VSC_SIZE */
+#define VSC_DATA2_SIZE(pitch) ((pitch) * 32)
+
 static void
 update_vsc_pipe(struct fd_batch *batch)
 {
@@ -331,11 +334,24 @@ update_vsc_pipe(struct fd_batch *batch)
        struct fd_ringbuffer *ring = batch->gmem;
        int i;
 
+
+       if (!fd6_ctx->vsc_data) {
+               fd6_ctx->vsc_data = fd_bo_new(ctx->screen->dev,
+                       VSC_DATA_SIZE(fd6_ctx->vsc_data_pitch),
+                       DRM_FREEDRENO_GEM_TYPE_KMEM, "vsc_data");
+       }
+
+       if (!fd6_ctx->vsc_data2) {
+               fd6_ctx->vsc_data2 = fd_bo_new(ctx->screen->dev,
+                       VSC_DATA2_SIZE(fd6_ctx->vsc_data2_pitch),
+                       DRM_FREEDRENO_GEM_TYPE_KMEM, "vsc_data2");
+       }
+
        OUT_PKT4(ring, REG_A6XX_VSC_BIN_SIZE, 3);
        OUT_RING(ring, A6XX_VSC_BIN_SIZE_WIDTH(gmem->bin_w) |
                        A6XX_VSC_BIN_SIZE_HEIGHT(gmem->bin_h));
        OUT_RELOCW(ring, fd6_ctx->vsc_data,
-                       32 * A6XX_VSC_DATA_PITCH, 0, 0); /* VSC_SIZE_ADDRESS_LO/HI */
+                       32 * fd6_ctx->vsc_data_pitch, 0, 0); /* VSC_SIZE_ADDRESS_LO/HI */
 
        OUT_PKT4(ring, REG_A6XX_VSC_BIN_COUNT, 1);
        OUT_RING(ring, A6XX_VSC_BIN_COUNT_NX(gmem->nbins_x) |
@@ -352,15 +368,183 @@ update_vsc_pipe(struct fd_batch *batch)
 
        OUT_PKT4(ring, REG_A6XX_VSC_PIPE_DATA2_ADDRESS_LO, 4);
        OUT_RELOCW(ring, fd6_ctx->vsc_data2, 0, 0, 0);
-       OUT_RING(ring, A6XX_VSC_DATA2_PITCH);
+       OUT_RING(ring, fd6_ctx->vsc_data2_pitch);
        OUT_RING(ring, fd_bo_size(fd6_ctx->vsc_data2));
 
        OUT_PKT4(ring, REG_A6XX_VSC_PIPE_DATA_ADDRESS_LO, 4);
        OUT_RELOCW(ring, fd6_ctx->vsc_data, 0, 0, 0);
-       OUT_RING(ring, A6XX_VSC_DATA_PITCH);
+       OUT_RING(ring, fd6_ctx->vsc_data_pitch);
        OUT_RING(ring, fd_bo_size(fd6_ctx->vsc_data));
 }
 
+/* TODO we probably have more than 8 scratch regs.. although the first
+ * 8 is what kernel dumps, and it is kinda useful to be able to see
+ * the value in kernel traces
+ */
+#define OVERFLOW_FLAG_REG REG_A6XX_CP_SCRATCH_REG(0)
+
+/*
+ * If overflow is detected, either 0x1 (VSC_DATA overflow) or 0x3
+ * (VSC_DATA2 overflow) plus the size of the overflowed buffer is
+ * written to control->vsc_overflow.  This allows the CPU to
+ * detect which buffer overflowed (and, since the current size is
+ * encoded as well, this protects against already-submitted but
+ * not executed batches from fooling the CPU into increasing the
+ * size again unnecessarily).
+ *
+ * To conditionally use VSC data in draw pass only if there is no
+ * overflow, we use a scratch reg (OVERFLOW_FLAG_REG) to hold 1
+ * if no overflow, or 0 in case of overflow.  The value is inverted
+ * to make the CP_COND_REG_EXEC stuff easier.
+ */
+static void
+emit_vsc_overflow_test(struct fd_batch *batch)
+{
+       struct fd_ringbuffer *ring = batch->gmem;
+       struct fd_gmem_stateobj *gmem = &batch->ctx->gmem;
+       struct fd6_context *fd6_ctx = fd6_context(batch->ctx);
+
+       debug_assert((fd6_ctx->vsc_data_pitch & 0x3) == 0);
+       debug_assert((fd6_ctx->vsc_data2_pitch & 0x3) == 0);
+
+       /* Clear vsc_scratch: */
+       OUT_PKT7(ring, CP_MEM_WRITE, 3);
+       OUT_RELOCW(ring, control_ptr(fd6_ctx, vsc_scratch));
+       OUT_RING(ring, 0x0);
+
+       /* Check for overflow, write vsc_scratch if detected: */
+       for (int i = 0; i < gmem->num_vsc_pipes; i++) {
+               OUT_PKT7(ring, CP_COND_WRITE5, 8);
+               OUT_RING(ring, CP_COND_WRITE5_0_FUNCTION(WRITE_GE) |
+                               CP_COND_WRITE5_0_WRITE_MEMORY);
+               OUT_RING(ring, CP_COND_WRITE5_1_POLL_ADDR_LO(REG_A6XX_VSC_SIZE_REG(i)));
+               OUT_RING(ring, CP_COND_WRITE5_2_POLL_ADDR_HI(0));
+               OUT_RING(ring, CP_COND_WRITE5_3_REF(fd6_ctx->vsc_data_pitch));
+               OUT_RING(ring, CP_COND_WRITE5_4_MASK(~0));
+               OUT_RELOCW(ring, control_ptr(fd6_ctx, vsc_scratch));  /* WRITE_ADDR_LO/HI */
+               OUT_RING(ring, CP_COND_WRITE5_7_WRITE_DATA(1 + fd6_ctx->vsc_data_pitch));
+
+               OUT_PKT7(ring, CP_COND_WRITE5, 8);
+               OUT_RING(ring, CP_COND_WRITE5_0_FUNCTION(WRITE_GE) |
+                               CP_COND_WRITE5_0_WRITE_MEMORY);
+               OUT_RING(ring, CP_COND_WRITE5_1_POLL_ADDR_LO(REG_A6XX_VSC_SIZE2_REG(i)));
+               OUT_RING(ring, CP_COND_WRITE5_2_POLL_ADDR_HI(0));
+               OUT_RING(ring, CP_COND_WRITE5_3_REF(fd6_ctx->vsc_data2_pitch));
+               OUT_RING(ring, CP_COND_WRITE5_4_MASK(~0));
+               OUT_RELOCW(ring, control_ptr(fd6_ctx, vsc_scratch));  /* WRITE_ADDR_LO/HI */
+               OUT_RING(ring, CP_COND_WRITE5_7_WRITE_DATA(3 + fd6_ctx->vsc_data2_pitch));
+       }
+
+       OUT_PKT7(ring, CP_WAIT_MEM_WRITES, 0);
+
+       OUT_PKT7(ring, CP_WAIT_FOR_ME, 0);
+
+       OUT_PKT7(ring, CP_MEM_TO_REG, 3);
+       OUT_RING(ring, CP_MEM_TO_REG_0_REG(OVERFLOW_FLAG_REG) |
+                       CP_MEM_TO_REG_0_CNT(1 - 1));
+       OUT_RELOC(ring, control_ptr(fd6_ctx, vsc_scratch));  /* SRC_LO/HI */
+
+       /*
+        * This is a bit awkward, we really want a way to invert the
+        * CP_REG_TEST/CP_COND_REG_EXEC logic, so that we can conditionally
+        * execute cmds to use hwbinning when a bit is *not* set.  This
+        * dance is to invert OVERFLOW_FLAG_REG
+        *
+        * A CP_NOP packet is used to skip executing the 'else' clause
+        * if (b0 set)..
+        */
+
+       BEGIN_RING(ring, 10);  /* ensure if/else doesn't get split */
+
+       /* b0 will be set if VSC_DATA or VSC_DATA2 overflow: */
+       OUT_PKT7(ring, CP_REG_TEST, 1);
+       OUT_RING(ring, A6XX_CP_REG_TEST_0_REG(OVERFLOW_FLAG_REG) |
+                       A6XX_CP_REG_TEST_0_BIT(0) |
+                       A6XX_CP_REG_TEST_0_UNK25);
+
+       OUT_PKT7(ring, CP_COND_REG_EXEC, 2);
+       OUT_RING(ring, 0x10000000);
+       OUT_RING(ring, 7);  /* conditionally execute next 7 dwords */
+
+       /* if (b0 set) */ {
+               /*
+                * On overflow, mirror the value to control->vsc_overflow
+                * which CPU is checking to detect overflow (see
+                * check_vsc_overflow())
+                */
+               OUT_PKT7(ring, CP_REG_TO_MEM, 3);
+               OUT_RING(ring, CP_REG_TO_MEM_0_REG(OVERFLOW_FLAG_REG) |
+                               CP_REG_TO_MEM_0_CNT(1 - 1));
+               OUT_RELOCW(ring, control_ptr(fd6_ctx, vsc_overflow));
+
+               OUT_PKT4(ring, OVERFLOW_FLAG_REG, 1);
+               OUT_RING(ring, 0x0);
+
+               OUT_PKT7(ring, CP_NOP, 2);  /* skip 'else' when 'if' is taken */
+       } /* else */ {
+               OUT_PKT4(ring, OVERFLOW_FLAG_REG, 1);
+               OUT_RING(ring, 0x1);
+       }
+}
+
+static void
+check_vsc_overflow(struct fd_context *ctx)
+{
+       struct fd6_context *fd6_ctx = fd6_context(ctx);
+       struct fd6_control *control = fd_bo_map(fd6_ctx->control_mem);
+       uint32_t vsc_overflow = control->vsc_overflow;
+
+       if (!vsc_overflow)
+               return;
+
+       /* clear overflow flag: */
+       control->vsc_overflow = 0;
+
+       unsigned buffer = vsc_overflow & 0x3;
+       unsigned size = vsc_overflow & ~0x3;
+
+       if (buffer == 0x1) {
+               /* VSC_PIPE_DATA overflow: */
+
+               if (size < fd6_ctx->vsc_data_pitch) {
+                       /* we've already increased the size, this overflow is
+                        * from a batch submitted before resize, but executed
+                        * after
+                        */
+                       return;
+               }
+
+               fd_bo_del(fd6_ctx->vsc_data);
+               fd6_ctx->vsc_data = NULL;
+               fd6_ctx->vsc_data_pitch *= 2;
+
+               debug_printf("resized VSC_DATA_PITCH to: 0x%x\n", fd6_ctx->vsc_data_pitch);
+
+       } else if (buffer == 0x3) {
+               /* VSC_PIPE_DATA2 overflow: */
+
+               if (size < fd6_ctx->vsc_data2_pitch) {
+                       /* we've already increased the size */
+                       return;
+               }
+
+               fd_bo_del(fd6_ctx->vsc_data2);
+               fd6_ctx->vsc_data2 = NULL;
+               fd6_ctx->vsc_data2_pitch *= 2;
+
+               debug_printf("resized VSC_DATA2_PITCH to: 0x%x\n", fd6_ctx->vsc_data2_pitch);
+
+       } else {
+               /* NOTE: it's possible, for example, for overflow to corrupt the
+                * control page.  I mostly just see this hit if I set initial VSC
+                * buffer size extremely small.  Things still seem to recover,
+                * but maybe we should pre-emptively realloc vsc_data/vsc_data2
+                * and hope for different memory placement?
+                */
+               DBG("invalid vsc_overflow value: 0x%08x", vsc_overflow);
+       }
+}
+
 static void
 set_scissor(struct fd_ringbuffer *ring, uint32_t x1, uint32_t y1, uint32_t x2, uint32_t y2)
 {
@@ -463,6 +647,8 @@ emit_binning_pass(struct fd_batch *batch)
 
        OUT_PKT7(ring, CP_WAIT_FOR_ME, 0);
 
+       emit_vsc_overflow_test(batch);
+
        OUT_PKT7(ring, CP_SET_VISIBILITY_OVERRIDE, 1);
        OUT_RING(ring, 0x0);
 
@@ -542,6 +728,12 @@ fd6_emit_tile_init(struct fd_batch *batch)
                update_render_cntl(batch, pfb, true);
                emit_binning_pass(batch);
 
+               /*
+                * NOTE: even if we detect VSC overflow and disable use of
+                * visibility stream in draw pass, it is still safe to execute
+                * the reset of these cmds:
+                */
+
                set_bin_size(ring, gmem->bin_w, gmem->bin_h,
                                A6XX_RB_BIN_CONTROL_USE_VIZ | 0x6000000);
 
@@ -611,21 +803,44 @@ fd6_emit_tile_prep(struct fd_batch *batch, struct fd_tile *tile)
 
                OUT_PKT7(ring, CP_WAIT_FOR_ME, 0);
 
-               OUT_PKT7(ring, CP_SET_VISIBILITY_OVERRIDE, 1);
-               OUT_RING(ring, 0x0);
-
                OUT_PKT7(ring, CP_SET_MODE, 1);
                OUT_RING(ring, 0x0);
 
-               OUT_PKT7(ring, CP_SET_BIN_DATA5, 7);
-               OUT_RING(ring, CP_SET_BIN_DATA5_0_VSC_SIZE(pipe->w * pipe->h) |
-                               CP_SET_BIN_DATA5_0_VSC_N(tile->n));
-               OUT_RELOC(ring, fd6_ctx->vsc_data,       /* VSC_PIPE[p].DATA_ADDRESS */
-                               (tile->p * A6XX_VSC_DATA_PITCH), 0, 0);
-               OUT_RELOC(ring, fd6_ctx->vsc_data,       /* VSC_SIZE_ADDRESS + (p * 4) */
-                               (tile->p * 4) + (32 * A6XX_VSC_DATA_PITCH), 0, 0);
-               OUT_RELOC(ring, fd6_ctx->vsc_data2,
-                               (tile->p * A6XX_VSC_DATA2_PITCH), 0, 0);
+               /*
+                * Conditionally execute if no VSC overflow:
+                */
+
+               BEGIN_RING(ring, 18);  /* ensure if/else doesn't get split */
+
+               OUT_PKT7(ring, CP_REG_TEST, 1);
+               OUT_RING(ring, A6XX_CP_REG_TEST_0_REG(OVERFLOW_FLAG_REG) |
+                               A6XX_CP_REG_TEST_0_BIT(0) |
+                               A6XX_CP_REG_TEST_0_UNK25);
+
+               OUT_PKT7(ring, CP_COND_REG_EXEC, 2);
+               OUT_RING(ring, 0x10000000);
+               OUT_RING(ring, 11);  /* conditionally execute next 11 dwords */
+
+               /* if (no overflow) */ {
+                       OUT_PKT7(ring, CP_SET_BIN_DATA5, 7);
+                       OUT_RING(ring, CP_SET_BIN_DATA5_0_VSC_SIZE(pipe->w * pipe->h) |
+                                       CP_SET_BIN_DATA5_0_VSC_N(tile->n));
+                       OUT_RELOC(ring, fd6_ctx->vsc_data,       /* VSC_PIPE[p].DATA_ADDRESS */
+                                       (tile->p * fd6_ctx->vsc_data_pitch), 0, 0);
+                       OUT_RELOC(ring, fd6_ctx->vsc_data,       /* VSC_SIZE_ADDRESS + (p * 4) */
+                                       (tile->p * 4) + (32 * fd6_ctx->vsc_data_pitch), 0, 0);
+                       OUT_RELOC(ring, fd6_ctx->vsc_data2,
+                                       (tile->p * fd6_ctx->vsc_data2_pitch), 0, 0);
+
+                       OUT_PKT7(ring, CP_SET_VISIBILITY_OVERRIDE, 1);
+                       OUT_RING(ring, 0x0);
+
+                       /* use a NOP packet to skip over the 'else' side: */
+                       OUT_PKT7(ring, CP_NOP, 2);
+               } /* else */ {
+                       OUT_PKT7(ring, CP_SET_VISIBILITY_OVERRIDE, 1);
+                       OUT_RING(ring, 0x1);
+               }
 
                set_window_offset(ring, x1, y1);
 
@@ -635,9 +850,6 @@ fd6_emit_tile_prep(struct fd_batch *batch, struct fd_tile *tile)
                OUT_PKT4(ring, REG_A6XX_VPC_SO_OVERRIDE, 1);
                OUT_RING(ring, A6XX_VPC_SO_OVERRIDE_SO_DISABLE);
 
-               OUT_PKT7(ring, CP_SET_VISIBILITY_OVERRIDE, 1);
-               OUT_RING(ring, 0x0);
-
                OUT_PKT7(ring, CP_SET_MODE, 1);
                OUT_RING(ring, 0x0);
 
@@ -1088,8 +1300,23 @@ fd6_emit_tile_gmem2mem(struct fd_batch *batch, struct fd_tile *tile)
        struct fd_ringbuffer *ring = batch->gmem;
 
        if (use_hw_binning(batch)) {
-               OUT_PKT7(ring, CP_SET_MARKER, 1);
-               OUT_RING(ring, A6XX_CP_SET_MARKER_0_MODE(0x5) | 0x10);
+               /* Conditionally execute if no VSC overflow: */
+
+               BEGIN_RING(ring, 7);  /* ensure if/else doesn't get split */
+
+               OUT_PKT7(ring, CP_REG_TEST, 1);
+               OUT_RING(ring, A6XX_CP_REG_TEST_0_REG(OVERFLOW_FLAG_REG) |
+                               A6XX_CP_REG_TEST_0_BIT(0) |
+                               A6XX_CP_REG_TEST_0_UNK25);
+
+               OUT_PKT7(ring, CP_COND_REG_EXEC, 2);
+               OUT_RING(ring, 0x10000000);
+               OUT_RING(ring, 2);  /* conditionally execute next 2 dwords */
+
+               /* if (no overflow) */ {
+                       OUT_PKT7(ring, CP_SET_MARKER, 1);
+                       OUT_RING(ring, A6XX_CP_SET_MARKER_0_MODE(0x5) | 0x10);
+               }
        }
 
        OUT_PKT7(ring, CP_SET_DRAW_STATE, 3);
@@ -1124,6 +1351,10 @@ fd6_emit_tile_fini(struct fd_batch *batch)
        fd6_emit_lrz_flush(ring);
 
        fd6_event_write(batch, ring, CACHE_FLUSH_TS, true);
+
+       if (use_hw_binning(batch)) {
+               check_vsc_overflow(batch->ctx);
+       }
 }
 
 static void