ac: implement nir_op_ldexp

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ac: fix nir_op_fdd{x,y} handling

radeonsi, i965 and anv all treat fdd{x,y} opcodes the same as
fdd{x,y}_coarse by default. The SPIR-V spec lets the implementation
decide how it should be handled and radv was previously going
for the higher quality option. Here we change the shared amd
code to match how nir_op_fdd{x,y} is expected to be handled
by the other NIR drivers.

Fixes piglit test:
./bin/arb_shader_texture_lod-texgrad -auto

Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ac/radeonsi: add load_base_vertex() to the abi

Fixes the following piglit tests:

./bin/arb_shader_draw_parameters-basevertex basevertex -auto -fbo
./bin/arb_shader_draw_parameters-basevertex basevertex-baseinstance -auto -fbo

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: create get_base_vertex() helper

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi/nir: disable vertex_id_zero_based lowering

The lowering is incompatible with how the radeonsi backend works.

Fixes piglit test:
./bin/arb_shader_draw_parameters-basevertex vertexid-zerobased -auto

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ac: add support for handling nir_intrinsic_load_vertex_id

This will be used by radeonsi.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ac: fix f2b and i2b for doubles

Without this llvm was asserting in debug builds.

V2: use LLVMConstNull()

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

intel/ir: Fix invalid type aliasing with undefined behavior in test_eu_compact.

test_fuzz_compact_instruction() was attempting to modify the uint64_t
data array of a brw_inst through a pointer to uint32_t, which has
undefined behavior.  This was causing the test_eu_compact unit test to
fail mysteriously for me on GCC 7 with some additional
harmless-looking changes I had applied to my tree, which happened to
affect the order instructions are emitted by GCC causing the bit
twiddling to be done after the clear_pad_bits() call which is supposed
to overwrite the same data through a pointer of different type,
leading to data corruption.  A similar failure has been reported by
Vinson Lee on the master branch built with GCC 8.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105052
Tested-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>

util/bitset: Make C++ wrapper trivially constructible.

In order to fix a build failure on compilers not implementing
unrestricted unions, which is a C++11 feature.

v2: Provide signed integer comparison and assignment operators instead
    of BITSET_WORD ones to avoid spurious ambiguity warnings on
    comparisons with a signed integer literal.

Fixes: ba79a90fb52e1e81fb "glsl: Switch ast_type_qualifier to a 128-bit bitset."
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105238
Tested-by: Roland Scheidegger <sroland@vmware.com>
Tested-By: George Kyriazis <george.kyriazis@intel.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

intel/tools: Use gen_device_name_to_pci_device_id in aubinator

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>

intel/common: Add gen_device_name_to_pci_device_id

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>

intel/vulkan: Support INTEL_DEVID_OVERRIDE environment variable

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>

i965: Use gen_get_pci_device_id_override

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>

intel/common: Add gen_get_pci_device_id_override

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>

intel/vulkan: Support INTEL_NO_HW environment variable

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Scott D Phillips <scott.d.phillips@intel.com>

android: fix source files path for libmesa_anv_gen11

Signed-off-by: Harish Krupo <harish.krupo.kps@intel.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

meson: avoid changing types for the dri3 option

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

meson: simplify the gbm option code, and avoid changing types

v2: drop gallium comment (Dylan)

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

ac/nir: clean up a hack about rounding 2nd coord component

It's basically just the opposite, and it only makes sense to
round the layer for 2D texture arrays.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

nvc0: collapse output slots to have adjacent registers

The hardware skips over unallocated slots, so we have to make sure those
registers are packed together.

Fixes KHR-GL45.enhanced_layouts.fragment_data_location_api

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Tested-by: Karol Herbst <kherbst@redhat.com>

radv: expose async compute on SI

It looks like we had all the pieces in place for this,
just never tested it and turned it on.

I don't see any CTS regressions and the computeshader
demo runs.

Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: merge tess rings into a single bo

Inspired by a passing commit to radeonsi.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

docs: update calendar, add news and link release notes to 17.3.6

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

docs: add sha256 checksums for 17.3.6

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit b00880973eeab5d29413eb8a27707f62904723ea)

docs: add release notes for 17.3.6

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
(cherry picked from commit b3e5a3f35bfe5b69758ceb90f93fffbee01a5682)

meson: fix building without GL

libgl will be undefined _glx, so move that check inside the
`if with_glx != 'disabled'` block.

v2: - Simplify commit message (Eric, Emil)

Fixes: 5c460337fd9c109 ("meson: Fix GL and EGL pkg-config files with glvnd")
Reported-by: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
CC: Daniel Stone <daniels@collabora.com>
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Untested-by: Jason Ekstrand <jason@jlekstrand.net>
Acked-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

intel: aubinator_error_decode: fix segfault on missing register

Some register might be missing in our genxmls. Don't try to decode
them.

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

*-symbol-check: use correct `nm` path when cross-compiling

Inspired-by: a similar patch for libdrm by Heiko Becker
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

nvir/gm107: consider FILE_FLAGS dependencies in SchedDataCalculatorGM107

currently while insterting barriers, writes and reads to FILE_FLAGS aren't
considered. This can lead to WaR hazards in some situations.

With the previous commit fixes shaders with intstructions like this:
  mad u32 $r2 $r4 $r11 $r2
  mad u32 { $r5 $c0 } $r4 $r10 $r6
  mad (SUBOP:1) u32 $r3 $r4 $r10 $r2 $c0

Affects OpenCL CTS tests on Maxwell+:
basic/test_basic intmath_long
basic/test_basic intmath_long2
basic/test_basic intmath_long4

v2: only put barriers on instructions which actually read flags

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>

nvir/gm107: iterate over all defs in SchedDataCalculatorGM107::findFirstUse

In the sched data calculator we have to track first use of defs by iterating
over all defs of an instruction, not just the first one.

v2: fix minGRP and maxGRP values

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Karol Herbst <kherbst@redhat.com>

ac/nir: use ordered float comparisons except for not equal

Original patch from Timothy Arceri, I have just fixed the
not equal case locally.

This fixes one important rendering issue in Wolfenstein 2
(the cutscene transition issue).

RadeonSI uses the same ordered comparisons, so I guess that
what we should do as well.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104302
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104905
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Connor Abbott <cwabbott0@gmail.com>

android: vulkan/util: add dependency on libnativewindow for O and later

Similar to 90dd6e5 ("Android: egl: add dependency on libnativewindow")

Fixes the following building error:

In file included from out/target/product/x86_64/obj_x86/STATIC_LIBRARIES/libmesa_vulkan_util_intermediates/util/vk_enum_to_str.c:26:
external/mesa/include/vulkan/vk_android_native_buffer.h:22:10: fatal error: 'system/window.h' file not found
         ^~~~~~~~~~~~~~~~~
1 error generated.

Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

android: anv: add dependency on libnativewindow for O and later

Similar to 90dd6e5 ("Android: egl: add dependency on libnativewindow")

Fixes the following building errors:

In file included from external/mesa/src/intel/vulkan/gen7_cmd_buffer.c:30:
In file included from external/mesa/src/intel/vulkan/anv_private.h:72:
external/mesa/include/vulkan/vk_android_native_buffer.h:22:10: fatal
error: 'system/window.h' file not found
         ^~~~~~~~~~~~~~~~~
1 error generated.
...
In file included from external/mesa/src/intel/vulkan/anv_gem.c:32:
In file included from external/mesa/src/intel/vulkan/anv_private.h:72:
external/mesa/include/vulkan/vk_android_native_buffer.h:22:10: fatal
error: 'system/window.h' file not found
         ^~~~~~~~~~~~~~~~~
1 error generated.

Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

android: anv/extensions: fix generated sources build

Building rules are aligned to automake ones

The correct script to build anv_extensions.{c,h} is anv_extensions_gen.py
Generation rules for anv_extensions.c requires --out-c option
Generation rules for anv_extensions.h were missing
Necessary include paths are added to avoid following build errors:

cp: cannot stat '.../gen/STATIC_LIBRARIES/libmesa_vulkan_common_intermediates/vulkan/anv_extensions.c':
No such file or directory

In file included from external/mesa/src/intel/vulkan/anv_gem.c:32:
external/mesa/src/intel/vulkan/anv_private.h:75:10: fatal error: 'anv_extensions.h' file not found
         ^~~~~~~~~~~~~~~~~~
1 error generated.

In file included from external/mesa/src/intel/vulkan/anv_batch_chain.c:30:
external/mesa/src/intel/vulkan/anv_private.h:75:10: fatal error: 'anv_extensions.h' file not found
         ^~~~~~~~~~~~~~~~~~
1 error generated.

Fixes: dd088d4bec7 ("anv/extensions: Generate a header file with extension tables")
Cc: "18.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

radeonsi: remove 2 unused user SGPRs from merged TES-GS with 32-bit pointers

The effect of the last 13 commits on user SGPR counts:

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: make SI_SGPR_VERTEX_BUFFERS the last user SGPR input

so that it can be removed and replaced with inline VBO descriptors,
and the pointer can be packed in unused bits of VBO descriptors.
This also removes the pointer from merged TES-GS where it's useless.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: set correct num_input_sgprs for VS prolog in merged shaders

We need to take num_input_sgprs from VS, not the second shader.
No apps suffered from this.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: allow fewer input SGPRs in 2nd shader of merged shaders

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: don't use struct si_descriptors for vertex buffer descriptors

VBO descriptor code will change a lot one day.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

build: Move wayland-scanner check into platform

Also only check for wayland-scanner if building for the Wayland
platform.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: bfa22266cd4d ("vulkan/wsi/wayland: Add support for zwp_dmabuf")
Cc: Emil Velikov <emil.velikov@collabora.co.uk>
Reported-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105211

build: Move wayland-protocols check into platform

In line with wayland-client and wayland-server, move the check for
wayland-protocols into the wayland platform branch.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: bfa22266cd4d ("vulkan/wsi/wayland: Add support for zwp_dmabuf")
Cc: Emil Velikov <emil.velikov@collabora.co.uk>
Reported-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105211

vulkan/wsi/wayland: Move Wayland protocol from BUILT_SOURCES

autotools wants to have the BUILT_SOURCES ready as soon as it enters the
directory, even if they are not used. This meant the build failed if
wayland-protocols was not available on the system, even if it was not
enabled.

As BUILT_SOURCES cannot be used in a conditional (cf. 166852ee957f), do
the same thing as EGL and manually encode the dependencies in the
Makefile.

Signed-off-by: Daniel Stone <daniels@collabora.com>
Fixes: bfa22266cd4d ("vulkan/wsi/wayland: Add support for zwp_dmabuf")
Cc: Emil Velikov <emil.velikov@collabora.co.uk>
Reported-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105211

r600: fix tgsi clock last setting

On cayman this was hitting an assert later, which probably wasn't
see on non-cayman due to having the t slot.

Fixes: 9041730d1 (r600: add support for ARB_shader_clock.)

r600: add time lo/hi debugging output.

This just adds the these to the debug prints.

radeonsi/nir: enable lowering of fpow

Lowering fpow in NIR rather than LLVM can be beneficial.

Polaris results:

Totals from affected shaders:
SGPRS: 124928 -> 124896 (-0.03 %)
VGPRS: 68616 -> 68332 (-0.41 %)
Spilled SGPRs: 394 -> 413 (4.82 %)
Spilled VGPRs: 0 -> 0 (0.00 %)
Private memory VGPRs: 0 -> 0 (0.00 %)
Scratch size: 0 -> 0 (0.00 %) dwords per thread
Code Size: 3668912 -> 3658368 (-0.29 %) bytes
LDS: 0 -> 0 (0.00 %) blocks
Max Waves: 18575 -> 18593 (0.10 %)
Wait states: 0 -> 0 (0.00 %)

Fixes: d6b753920677 "ac/nir: remove emission of nir_op_fpow"
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

ac: make use of ac_get_llvm_num_components() helper

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

gallium/tgsi: remove is_msaa_sampler array from tgsi_shader_info

Seems to have not been used since 16be87c90429

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>

radeonsi/nir: fix loading of doubles for tess varyings

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi/nir: fix lds store in tcs outputs handling

We were ignoring the channel offset.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

r600: Take ALU_EXTENDED into account when evaluating jump offsets

ALU_EXTENDED needs 4 DWORDS instead of the usual 2, hence if the last ALU
clause within a IF-JUMP or ELSE branch is ALU_EXTENDED the target jump
offset needs to be adjusted accordingly.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104654
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

mesa: Expose EXT_shader_framebuffer_fetch(_non_coherent) on desktop and embedded GL.

Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

glsl: Silence warnings when reading from a framebuffer fetch output.

Framebuffer fetch outputs are implicitly initialized upon entry to the
fragment shader.

Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

glsl: Specify framebuffer fetch coherency mode in lower_blend_equation_advanced().

This requires passing an extra argument to the lowering pass because
the KHR_blend_equation_advanced specification doesn't seem to define
any mechanism for the implementation to determine at compile-time
whether coherent blending can ever be used (not even an "#extension
KHR_blend_equation_advanced_coherent" directive seems to be required
in the shader source AFAICT).

In the long run we'll probably want to do state-dependent recompiles
based on the value of ctx->Color.BlendCoherent, but right now there
would be no benefit from that because the only driver that supports
coherent framebuffer fetch is i965 on SKL+ hardware, which are unable
to support the non-coherent path for the moment because of texture
layout issues, so framebuffer fetch coherency is always enabled for
them.

Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

glsl: Add support for the framebuffer fetch layout(noncoherent) qualifier.

This allows the application to request framebuffer fetch coherency
with per-fragment output granularity.  Coherent framebuffer fetch
outputs (which is the default if no qualifier is present for
compatibility with older versions of the EXT_shader_framebuffer_fetch
extension) will have ir_variable_data::memory_coherent set to true.

Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

glsl: Allow layout token for EXT_shader_framebuffer_fetch_non_coherent.

EXT_shader_framebuffer_fetch_non_coherent requires layout qualifiers
even on GL(ES) 2.

Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

glsl: Initialize ir_variable_data::fb_fetch_output earlier for GL(ES) 2.

At the same point where it is initialized on GL(ES) 3.0+ so we can
implement some common layout qualifier handling in a future commit.
Until now the fb_fetch_output flag would be inherited from the
original implicit gl_LastFragData declaration at a later point in the
AST to GLSL IR translation.

Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

glsl: Replace MESA_shader_framebuffer_fetch extension flags with EXT ones.

Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

glsl: Switch ast_type_qualifier to a 128-bit bitset.

This should end the drought of bits in the ast_type_qualifier object.
The bitset_t type works pretty much as a drop-in replacement for the
current uint64_t bitset.

The only catch is that the bitset_t type as defined in the previous
commit doesn't have a trivial constructor (because it has a
user-defined constructor), so it cannot be used as union member
without providing a user-defined constructor for the union (which
causes it in turn to be non-trivially constructible).  This annoyance
could be easily addressed in C++11 by declaring the default
constructor of bitset_t to be the implicitly defined one -- IMO one
more reason to drop support for GCC 4.2-4.3.

The other minor change was required because glsl_parser_extras.cpp was
hard-coding the type of bitset temporaries as uint64_t, which (unlike
would have been the case if the uint64_t had been replaced with
e.g. an __int128) would otherwise have caused a build failure, because
the boolean conversion operator of bitset_t is marked explicit (if
C++11 is available), so the bitset won't be silently truncated down to
1 bit in order to use it to initialize the uint64_t temporaries
(yikes).

Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

util/bitset: Add C++ wrapper for static-size bitsets.

Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

util: Add EXPLICIT_CONVERSION macro.

This can be used to specify that a C++ conversion operator is not
meant to be used for implicit conversions, which can lead to
unintended loss of information in some cases.  Implemented as a macro
in order to keep old GCC versions happy.

Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

mesa: Implement glFramebufferFetchBarrierEXT entry point.

Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

glapi: Update XML for last revision of EXT_shader_framebuffer_fetch.

Desktop GL is now supported, and there is an additional entry-point
for EXT_shader_framebuffer_fetch_non_coherent.

Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

mesa: Rename MESA_shader_framebuffer_fetch gl_extensions bits to EXT.

The changes I had originally planned for the MESA_shader_framebuffer_fetch
extension have been merged into the EXT spec, there's no point in keeping
MESA_shader_framebuffer_fetch extension enables.

Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

mesa: Rename dd_function_table::BlendBarrier to match latest EXT spec.

This GL entry point was renamed to glFramebufferFetchBarrier() in the
EXT extension on request from Khronos members.  Update the Mesa
codebase to match the latest spec.

Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

i965: Fix KHR_blend_equation_advanced with some render targets.

This reverts two bogus and seemingly useless changes from the commits
referenced below, which broke KHR_blend_equation_advanced (and
EXT_shader_framebuffer_fetch_non_coherent which wasn't exposed yet)
for any kind of render target surface that would cause the
get_isl_surf() call in brw_emit_surface_state() to do anything useful
(notice how the result of get_isl_surf() is completely ignored by the
caller right now), as was the case while using those extensions with
1D array or 3D framebuffers in particular.

Fixes: f5859b45b1686e8116380d87 "i965/miptree: Switch remaining surfaces to isl"
Fixes: bf24c3539e4b6989512968ca "i965/miptree: Clean-up unused"
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Plamena Manolova <plamena.manolova@intel.com>

radeonsi: remove si_descriptors parameter from emit_shader_pointer functions

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: preload the tess offchip ring in TES

so that it's not done multiple times in branches

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: move tess ring address into TCS_OUT_LAYOUT, removes 2 TCS user SGPRs

TCS_OUT_LAYOUT has 13 unused bits. That's enough for a 32-bit address
aligned to 512KB. Hey, it's a 13-bit pointer!

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: move 2nd-shader descriptor pointers into s[0:1]

If 32-bit pointers are supported, both pointers can be moved into s[0:1]
and then ESGS has exactly the same user data SGPR declarations as VS.

If 32-bit pointers are not supported, only one pointer can be moved into
s[0:1]. In that case, the 2nd pointer is moved before TCS constants,
so that the location is the same in HS and GS.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: change si_descriptors::shader_userdata_offset type to short

We will want to use SH registers outside of user data SGPRs, like the GFX9
special SGPRs.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: put both tessellation rings into 1 buffer

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: move tessellation ring info into si_screen

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: move TCS_OUT_LAYOUT.PatchVerticesIn to lower bits

For a later patch.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

nvir: dont optimize mad with subops to shladd

Signed-off-by: Karol Herbst <kherbst@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

radv: Really use correct HTILE expanded words.

When transitioning to an htile compressed depth format, Set the full
depth range, so later rasterization can pass HiZ. Previously, for depth
only formats, the depth range was set to 0 to 0. This caused unwanted
HiZ rejections with a VK_FORMAT_D16_UNORM depth buffer
(VK_FORMAT_D32_SFLOAT was not affected somehow).

These values are derived from PAL [0], since I can't find the
specification describing the htile values.

[0] https://github.com/GPUOpen-Drivers/pal/blob/5cba4ecbda9452773f59692f5915301e7db4a183/src/core/hw/gfxip/gfx9/gfx9MaskRam.cpp#L1500

CC: Dave Airlie <airlied@redhat.com>
CC: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
CC: mesa-stable@lists.freedesktop.org
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Grazvydas Ignotas <notasas@gmail.com>
Fixes: 5158603182fe7435 "radv: Use correct HTILE expanded words."

radv/extensions: fix c_vk_version for patch == None

Similar to cb0d1ba156 ("anv/extensions: Fix VkVersion::c_vk_version for patch == None")
fixes the following building errors:

out/target/product/x86_64/obj_x86/STATIC_LIBRARIES/libmesa_radv_common_intermediates/radv_entrypoints.c:1161:48:
error: use of undeclared identifier 'None'; did you mean 'long'?
      return instance && VK_MAKE_VERSION(1, 0, None) <= core_version;
                                               ^~~~
                                               long
external/mesa/include/vulkan/vulkan.h:34:43: note: expanded from macro 'VK_MAKE_VERSION'
    (((major) << 22) | ((minor) << 12) | (patch))
                                          ^
...
fatal error: too many errors emitted, stopping now [-ferror-limit=]
20 errors generated.

Fixes: e72ad05c1d ("radv: Return NULL for entrypoints when not supported.")
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

broadcom/vc5: Fix layout of 3D textures.

Cube maps are entire miptrees repeated, while 3D textures have each level
have all of its layers next to each other.  Fixes tex3d and
tex-miplevel-selection GL2:texture() 3D.

broadcom/vc5: Ignore unused usage flags in is_format_supported.

Like for vc4, the new DISPLAY_TARGET flag ended up causing no formats to
match.  Just drop the whole retval == usage thing and return early when we
hit a known unsupported case.

Fixes: f7604d8af521 ("st/dri: only expose config formats that are display targets")

gbm: Fix the alpha masks in the GBM format table.

Once GBM started looking at the values of the alpha masks, ARGB/ABGR
wouldn't match any more because we had both A and R in the low bits.

Fixes: 2ed344645d65 ("gbm/dri: Add RGBA masks to GBM format table")
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Daniel Stone <daniels@collabora.com>

mesa: Update vertex processing mode on _mesa_UseProgram.

The change is a bug fix for 92d76a169:
  mesa: Provide an alternative to get_vp_mode()
that actually got exposed through 4562a7b0:
  vbo: Make use of _DrawVAO from the dlist code.

Fixes: KHR-GLES31.core.shader_image_load_store.advanced-sso-simple
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=105229
Signed-off-by: Mathias Fröhlich <Mathias.Froehlich@web.de>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: rename has_core_gs -> has_gs in get_programiv

This is also true for GLES.

Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: replace some API_OPENGL_CORE checks with _mesa_is_desktop_gl

This is more accurate with respect to the compatibility profile.

Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: add some of missing compatibility support for ARB_bindless_texture

The extension is exposed in the compatibility profile.

Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: expose ARB_enhanced_layouts in the compatibility profile

GLSL 1.40 is required.

Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: enable OpenGL 3.1 with ARB_compatibility

Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: implement ARB_compatibility

Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Brian Paul <brianp@vmware.com>

swr: remove dead LLVM code paths

LLVM requirement was bumped to 4.0.0 with earlier commit.
Hence any code tailored for older versions is now unreachable.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-By: George Kyriazis <george.kyriazis@intel.com>
Reviewed-by: Andres Gomez <agomez@igalia.com>

broadcom/vc4: Remove the retval==usage check in is_format_supported().

This got us into trouble recently, so just remove it entirely.

broadcom/vc4: Add support for YUV textures using unaccelerated blits.

Previously we would assertion fail about having no hardware format.  This
is enough to get kmscube -M nv12-2img working.

broadcom/vc4: Fix double-unrefcounting of prsc->next with shadows.

When we set up the shadow resource we were copying the original resource
as the template, including its prsc->next field.  When we shadowed the
first YUV plane's resource for linear-to-tiled conversion, we would end up
unbalancing the refcount on the shadow resource's destruction.

broadcom/vc4: Add pipe_reference debugging for vc4_bos.

Trying to track down the YUV EGLImage use-after-free, it helps to see what
the mystery objects are that are being refcounted.

broadcom/vc4: Remove dead vc4_bo_set_reference().

It would be broken if NULL was passed to it anyway, since it wouldn't
participate in screen->bo_handles management.

broadcom/vc4: Use pipe_resource_reference in sampler views.

Improves u_debug_refcount output.

broadcom/vc4: Allow importing linear BOs with arbitrary offset/stride.

This is part of supporting YUV textures -- MMAL will be handing us a
single GEM BO with the planes at offsets within it, and MMAL-decided
stride.

broadcom/vc4: Ignore PIPE_BIND_DISPLAY_TARGET in is_format_supported().

We were failing the retval == usage check at the end.

Fixes: f7604d8af521 ("st/dri: only expose config formats that are display targets")

etnaviv: fix in-place resolve tile count

TS tiles map to a fixed amount of bytes in the color/depth surface,
so the blocksize of the format needs to be taken into account when
calculating the number of tiles to fill.

The simplest fix is to just use the layer stride, which is the surface
size in bytes.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

etnaviv: switch magic single buffer state to "3"

Some of the 16bit formats misrender with missing tiles with the current
"2" state. As all the previously working formats also work with the "3"
state, just always use that one.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

etnaviv: add debug switch to disable single buffer feature

This feature has caused some trouble already. Add a debug switch to
allow users to quickly check if a specific issue is caused by this
feature.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian Gmeiner <christian.gmeiner@gmail.com>

meson: Fix GL and EGL pkg-config files with glvnd

Currently meson will generate a pkg-config that links to EGL_mesa (or
GLX_mesa), but this isn't correct, it should always link to EGL or GL.
Probably the "right" solution is to have glvnd itself provide the pkg
config files for GL and EGL, but that also means that glvnd needs to
provide many of the header files, which makes it a more involved job.

Fixes: a47c525f3281a27 ("meson: build glx")
Fixes: 035ec7a2bb2d5e4 ("meson: Add support for EGL glvnd")
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

egl/dri2: fix segfault when display initialisation fails

dri2_display_destroy() is called when platform specific display
initialisation fails. However, this would typically lead to a
segfault due to the dri2_egl_display vbtl not having been set up.

Fixes: 2db95482964 ("loader_dri3/glx/egl: Optionally use a blit
context for blitting operations")
Signed-off-by: Frank Binns <francisbinns@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>