anv: fix off by one in array check

`anv_formats[ARRAY_SIZE(anv_formats)]` is already one too far.
Spotted by Coverity.

CovID: 1417259
Fixes: 242211933a0682696170 "anv/formats: Nicely handle unknown VkFormat enums"
Cc: Jason Ekstrand <jason.ekstrand@intel.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

ac: reorg ac_shader_binary struct to take less space.

This reduces the size from 96 to 80 bytes but putting all the
32-bit sizes at the start.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: drop emit2d_dst_type.

This is completely unused now.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuien.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/meta: missing initialisations in create_pass().

Otherwise radv_cmd_state_setup_attachments() will complain it has no clearvalues,
when called via radv_process_depth_image_inplace().

v2: use LOAD/STORE instead of DONT_CARE, to preserve stencil values.

Signed-off-by: Xavier Bouchoux <xavierb@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: Enable command buffer chaining by default.

For approx 5-10% performance improvement in dota2.

Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Put semaphore waits in preamble cs.

The separate flush cs gets in the way of batchchain.

Reviewed-by: Dave Airlie <airlied@redhat.com>

radv: Actually set the cmd_buffer usage_flags.

Otherwise, the simultaneous uage bit doesn't get set from the begin
info, which we need for batchchaining.

Fixes: f4e499ec791 "radv: add initial non-conformant radv vulkan driver"
Reviewed-by: Dave Airlie <airlied@redhat.com>

util: improve compiler guard

Glibc 2.26 has dropped xlocale.h, but the functions needed (strtod_l()
and strdof_l()) can be found in stdlib.h.
Improve the detection method to allow newer builds to still make use of
the locale-setting.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102454
Cc: Laurent Carlier <lordheavym@gmail.com>
Cc: Emil Velikov <emil.l.velikov@gmail.com>
Cc: Rob Herring <robh@kernel.org>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Laurent Carlier <lordheavym@gmail.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

radeon/uvd: add Define Restart Interval to MJPEG bitstream reconstruction

It adds the capacity to decode MJPEG stream with DRI marker

Signed-off-by: Leo Liu <leo.liu@amd.com>

radeon/uvd: fix MJPEG quantization table index

Fixes: 130d1f456b8 ("radeon/uvd: reconstruct MJPEG bitstream")
Signed-off-by: Leo Liu <leo.liu@amd.com>

st/mesa: fix view template initialization in try_pbo_readpixels

I think this is what the code was meant to do, albeit as far as I can tell
the redundant initialization some analyzers complain about should work as
well just fine (only the first layer will be used, if the view contains one
or more layers doesn't really matter).

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102467
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: mesa-stable@lists.freedesktop.org

genxml: Make Border Color Pointer an address on Gen4-5, not an offset.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Inline emit_reloc in __genx_combine_address

One less layer of baklava.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Fix crash in fallback GTT mapping.

We can't perf_debug without a context.

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965: Fix state flagging of Gen6 SOL programs.

It doesn't seem like the old code could possibly work.

1. brw_gs_state_dirty made us bail unless one of these flags were set:
   _NEW_TEXTURE, BRW_NEW_GEOMETRY_PROGRAM, BRW_NEW_TRANSFORM_FEEDBACK
2. If there was no geometry program, we called brw_upload_ff_gs_prog()3
3. That checked brw_ff_gs_state_dirty and bailed unless these were set:
   _NEW_LIGHT, BRW_NEW_PRIMITIVE, BRW_NEW_TRANSFORM_FEEDBACK,
   BRW_NEW_VS_PROG_DATA.
4. brw_ff_gs_prog_key pv_first and attr fields were set based on data
   depending on _NEW_LIGHT and BRW_NEW_VS_PROG_DATA.

This means that if we needed a FF GS program, and changed the VS
outputs or provoking vertex mode, we'd fail to notice that we needed
to emit a new program.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

i965: Drop useless gen6_brw_upload_ff_gs_prog() wrapper.

gen6...brw?  Drop some baklava layers.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

freedreno: skip batch-cache for compute shaders

It is kind of pointless for compute, and avoids issues with apps kicking
off more than 32 compute shaders at once.

Signed-off-by: Rob Clark <robdclark@gmail.com>
Cc: "17.2" <mesa-stable@lists.freedesktop.org>

m4: Use older autoconf 2.63 compatible ax_check_compile_flag.

CentOS 6 and RHEL 6 have autoconf 2.63.

Fixes: e4b2b69e828c ("configure: Add and use AX_CHECK_COMPILE_FLAG")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Move BATCH_SZ define into intel_batchbuffer.c.

It's only used in one file.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

i965: Drop batch_size argument from brw_bufmgr_init().

This is dead code and hasn't been used in a long time.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

i965: Rename brw_bo::offset64 to gtt_offset.

We can drop the meaningless "64" suffix - libdrm_intel originally had
an "offset" field that was an "unsigned long" which was the wrong size,
and we couldn't remove/alter that field without breaking ABI, so we had
to add a uint64_t "offset64" field.

"gtt_offset" is also more descriptive than "offset".

(Patch originally written by Ken, but Chris suggested a better name and
supplied the giant comment making up the bulk of the patch, so I changed
the authorship to him.)

Acked-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

i965: Drop the BRW_BATCH_STRUCT macro.

It's used in exactly one place these days, and not much simpler than
just calling intel_batchbuffer_data directly.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

i965: Don't double count the batch in aperture_space.

intel_batchbuffer_reset calls add_exec_bo on the batch right away,
which adds in the batch BO size.

Fixes: 29ba502a4e28 ("i965: Use I915_EXEC_BATCH_FIRST when available.")
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

swr: Report format max_samples=1 to maintain support for "fake" msaa.

Accompanying patch "st/mesa: only try to create 1x msaa surfaces for
'fake' msaa" requires driver to report max_samples=1 to enable "fake"
msaa. Previously, 0 and 1 were treated equivalently in st_init_extensions()
and either could enable "fake" msaa.

This patch raises the swr default msaa_max_count from 0 to 1, so that
swr_is_format_supported will report max_samples=1.

Real msaa can still be enabled by exporting SWR_MSAA_MAX_COUNT with a
pow2 value between 2 and 16.

This patch is necessary to prevent an OpenSWR regression resulting from
the st/mesa patch.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102038
Acked-by: Brian Paul <brianp@vmware.com>
Reviewed-By: George Kyriazis <george.kyriazis@intel.com>

aubinator: remove duplicate initialisation

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>

radv: report VM faults if detected

It's fairly simple for now, but this might be quite useful.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radeonsi: move si_vm_fault_occured() to AMD common code

For radv, in order to report VM faults when detected.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: add radv_check_gpu_hangs() helper function

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: disassemble SPIR-V binaries with RADV_DEBUG=spirv

This introduces a new separate option because the output can
be quite verbose. If spirv-dis is not found in the path, this
debug option is useless.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: move RADV_TRACE_FILE functions to radv_debug.c

At the moment, debugging radv is not really easy because the
driver doesn't report enough information when it hangs. This
new file will be the main location for all debug tools.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: silent a compiler warning in radv_emit_framebuffer_state()

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

radv: compute correct maximum wave count per SIMD

Ported from RadeonSI (original patch by Marek).

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

st/mesa: only try to create 1x msaa surfaces for "fake" msaa drivers

For software drivers where we want "fake" msaa support for GL 3.x, we
treat 1 sample as being msaa.

For drivers with real msaa support, start format probing at 2x msaa.
For drivers with fake msaa support, start format probing at 1x msaa.

This also tweaks the MaxSamples code in st_init_extensions() so that
we use MaxSamples=1 for fake msaa.  This allows the format proble loops
to run at least one iteration.

This fixes a llvmpipe/VTK regression from commit 6839d3369905eb02151.
And for drivers with fake msaa support, calls such as
glTexImage2DMultisample(samples=1) will now succeed.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102038
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102125
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

nvc0/ir: propagate immediates to CALL input MOVs

On using builtin functions we have to move the input to registers $0 and $1, if
one of the input value is an immediate, we fail to propagate the immediate:

...
mov u32 $r477 0x00000003 (0)
...
mov u32 $r0 %r473 (0)
mov u32 $r1 $r477 (0)
call abs BUILTIN:0 (0)
mov u32 %r495 $r1 (0)
...

With this patch the immediate is propagated, potentially causing the first MOV
to be superfluous, which we'd remove in that case:

...

mov u32 $r0 %r473 (0)
mov u32 $r1 0x00000003 (0)
call abs BUILTIN:0 (0)
mov u32 %r495 $r1 (0)
...

Shaderdb stats:
total instructions in shared programs : 4893460 -> 4893324 (-0.00%)
total gprs used in shared programs    : 582972 -> 582881 (-0.02%)
total local used in shared programs   : 17960 -> 17960 (0.00%)

                local        gpr       inst      bytes
    helped           0          91         112         112
      hurt           0           0           0           0

v2:
 implement some changes proposed by imirkin, the manual deletion of the dead
 mov is necessary after ea22ac23e0 ("nvc0/ir: unlink values pre- and post-call
 to division function") as the potentially dead mov is unlinked properly,
 causing later passes to not notice the mov op at all and thus not cleaning it
 up. That makes up a big chunk of the regression the above commit caused.
 Keep the deletion of the op where it is, deleting it later unnecessarily blows
 up size of the change.

Signed-off-by: Tobias Klausmann <tobias.johannes.klausmann@mni.thm.de>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0: write 0 to pipeline_statistics.cs_invocations

cs_invocations are currently unsupported, but leaving the field uninitialized
is even worse.

fixes on nvc0:
 * KHR-GL45.pipeline_statistics_query_tests_ARB.functional_default_qo_values
 * KHR-GL45.pipeline_statistics_query_tests_ARB.functional_non_rendering_commands_do_not_affect_queries

Signed-off-by: Karol Herbst <karolherbst@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: mesa-stable@lists.freedesktop.org

llvmpipe: lp_build_gather_elem_vec BE fix for 3x16 load

Fix loading of a 3x16 vector as a single 48-bit load
on big-endian systems (PPC64, S390).

Roland Scheidegger's commit e827d9175675aaa6cfc0b981e2a80685fb7b3a74
plus Ray Strode's patch reduce pre-Roland Piglit failures from ~4000 to ~2000.  This patch fixes
three of the four regressions observed by Ray:

- draw-vertices
- draw-vertices-half-float
- draw-vertices-half-float_gles2

One regression remains:
- draw-vertices-2101010

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100613
Cc: "17.2" "17.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ben Crocker <bcrocker@redhat.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

gallivm: correct channel shift logic on big endian

lp_build_fetch_rgba_soa fetches a texel from a texture.
Part of that process involves first gathering the element
together from memory into a packed format, and then breaking
out the individual color channels into separate, parallel
arrays.

The code fails to account for endianess when reading the packed
values.

This commit attempts to correct the problem by reversing the order
the packed values are read on big endian systems.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100613
Cc: "17.2" "17.1" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Ray Strode <rstrode@redhat.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

util: only use SCHED_IDLE in pthread_setschedparam() when it's defined

Fixes build error when it's not.

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

anv/formats: Nicely handle unknown VkFormat enums

This fixes some crashes in the dEQP-VK.memory.requirements.core.* tests.
I'm not sure whether or not passing out-of-bound formats into the query
is supposed to be allowed but there's no harm in protecting ourselves
from it.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/101956
Cc: mesa-stable@lists.freedesktop.org

vbo: fix offset in minmax cache key

Instead of saving primitive offset in the minmax cache key,
save the actual buffer offset which is used in the cache lookup.

Fixes rendering artifact seen with GoogleEarth when run with
VMware driver.

v2: Per Brian's comment, initialize offset to avoid compiler warning.

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>

anv: fix build errors on android

error: incompatible pointer to integer conversion initializing 'VkFence'
   (aka 'unsigned long long') with an expression of type 'void *' [-Werror,-Wint-conversion]

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

winsys/amdgpu: set AMDGPU_GEM_CREATE_VM_ALWAYS_VALID if possible v2

When the kernel supports it set the local flag and
stop adding those BOs to the BO list.

Can probably be optimized much more.

v2: rename new flag to AMDGPU_GEM_CREATE_VM_ALWAYS_VALID

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: set a per-buffer flag that disables inter-process sharing (v4)

For lower overhead in the CS ioctl.
Winsys allocators are not used with interprocess-sharable resources.

v2: It shouldn't crash anymore, but the kernel will reject the new flag.
v3 (christian): Rename the flag, avoid sending those buffers in the BO list.
v4 (christian): Remove setting the kernel flag for now

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

i965: Use BLORP for buffer object stall avoidance blits instead of BLT.

Improves performance of GFXBench4 tests at 1024x768 on a Kabylake GT2:
- Manhattan 3.1 by 1.32134% +/- 0.322734% (n=8).
- Car Chase by 1.25607% +/- 0.291262% (n=5).

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Always flush caches after blitting to a GL buffer object.

When we blit data into a buffer object, we may need to invalidate any
caches that might contain stale data, so the new data becomes visible.

For example, if the buffer object is bound as a vertex buffer, we need
to invalidate the vertex fetch cache.

While this flushing was missing, it usually happened implicitly for
non-obvious reasons: we're usually on the render ring, and calling
intel_emit_linear_blit() would require switching to the BLT ring,
causing an implicit flush.  This likely provoked the kernel to do
PIPE_CONTROLs on our behalf.  Although, Gen4-5 wouldn't have this
behavior.  At any rate, we should do it ourselves.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Add PIPE_CONTRTOL_DATA_CACHE flush to brw_emit_mi_flush().

Although we're phasing out brw_emit_mi_flush(), we still use it in some
places in order to "flush everything".  In a number of those places, we
write data to a buffer that we may then bind as an image surface, SSBO,
or atomic buffer.  Those usages require us to flush the data cache.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Add a brw_blorp_copy_buffers() command.

This exposes the new blorp_copy_buffer() functionality to i965.
It should be a drop-in replacement for intel_emit_linear_blit()
(other than the arguments being backwards, for consistency with BLORP).

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

blorp: Make blorp_buffer_copy work on Gen4-6.

Gen4-6 can only handle surfaces up to 8192.  Only Gen7+ can do 16384.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

blorp: Turn anv_CmdCopyBuffer into a blorp_buffer_copy() helper.

I want to be able to copy between buffer objects using BLORP in the i965
driver.  Anvil already had code to do this, in a reasonably efficient
manner - first using large bpp copies, then smaller bpp copies.

This patch moves that logic into BLORP as blorp_buffer_copy(), so we
can use it in both drivers.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

radv: don't assert on empty hash table

Currently if table_size is 0, it's falling through to:

unreachable("hash table should never be full");

But table_size can be 0 when RADV_DEBUG=nocache is set, or when the
table allocation fails (which is not considered an error).

Fixes: f4e499ec791 "radv: add initial non-conformant radv vulkan driver"
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

svga: include sample count in surface_size() computation

Use MAX2() because sampleCount will be zero for non-MSAA surfaces.
No Piglit regressions.

Reviewed-by: Charmaine Lee <charmainel@vmware.com>

i965: drop unused brw->needs_unlit_centroid_workaround

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->has_surface_tile_offset in favor of devinfo's

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop unused brw->no_simd8

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop unused brw->has_pln

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->must_use_separate_stencil in favor of devinfo's

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop unused brw->has_negative_rhw_bug

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop unused brw->has_compr4

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->has_llc in favor of devinfo->has_llc

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->is_broxton

We need to take some take here as brw->is_broxton has been used to
check whether the device is a low power gen9 (aka Atom gen9 platform).

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->is_cherryview in favor of devinfo->is_cherryview

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->is_haswell in favor of devinfo->is_haswell

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->is_baytrail in favor of devinfo->is_baytrail

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->is_g4x in favor of devinfo->is_g4x

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->gt in favor of devinfo->gt

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->gen in favor of devinfo->gen

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

anv: use device->info instead of brw->is_*

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

Revert "egl: Allow creation of per surface out fence"

This reverts commit 13c23b19d0b3b965d666498eb759e63fc4a625d9.

Mesa CI was brought down by this commit, with:

mesa/drivers/dri/i965/brw_sync.c:491: brw_dri_create_fence_fd:
Assertion `brw->screen->has_exec_fence' failed.

i965: add 2xMSAA 16xMSAA modes to DRI configs.

For Gen8, add 2xMSAA. For Gen9, add 2xMSAA and 16xMSAA.
Special thanks to Eero Tamminen for reporting rasterizer
numbers being twice what it should be for 2xMSAA under
a benchmark.

V2: Make pointer name less ugly + add 2xMSAA for Gen8

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

Revert "i965: add 2xMSAA and 16xMSAA to DRI configs for Gen9."

This reverts commit f6d38785e8b28a6dd303884798b823e289817741.

Kevin's original patch accidentally didn't add 2x for Gen8; he sent
a v2 with a bunch of style fixes shortly after I pushed the original
patch, not knowing it was coming.  Let's just revert this one, apply
v2, and move on.

mesa/st: remove unwanted backup file

Fixes: 0ac78dc92582a59d4319 "util: move string_to_uint_map to glsl"
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

egl/dri2: only destroy created objects

dri2_display_destroy may be called by dri2_initialize_wayland_drm() if
initialization fails. In this case, these objects may not be initialized.

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

egl: Allow creation of per surface out fence

Add plumbing to allow creation of per display surface out fence.

Currently enabled only on android, since the system expects a valid
fd in ANativeWindow::{queue,cancel}Buffer. We pass a fd of -1 with
which native applications such as flatland fail. The patch enables
explicit sync on android and fixes one of the functional issue for
apps or buffer consumers which depend upon fence and its timestamp.

v2: a) Also implement the fence in cancelBuffer.
    b) The last sync fence is stored in drawable object
       rather than brw context.
    c) format clear.

v3: a) Save the last fence fd in DRI Context object.
    b) Return the last fence if the batch buffer is empty and
       nothing to be flushed when _intel_batchbuffer_flush_fence
    c) Add the new interface in vbtl to set the retrieve fence

v3.1 a) close fd in the new vbtl interface on none Android platform

v4: a) The last fence is saved in brw context.
    b) The retrieve fd is for all the platform but not just Android
    c) Add a uniform dri2 interface to initialize the surface.

v4.1: a) make some changes of variable name.
      b) the patch is broken into two patches.

v4.2: a) Add a deinit interface for surface to clear the out fence

v5: a) Add enable_out_fence to init, platform sets it true or
       false
    b) Change get fd to update fd and check for fence
    c) Commit description updated

v6: a) Heading and commit description updated
    b) enable_out_fence is set only if fence is supported
    c) Review comments on function names
    d) Test with standalone patch, resolves the bug

v6.1: Check for old display fence reverted

v6.2: enable_out_fence initialized to false by default,
      dri2_surf_update_fence_fd updated, deinit changed to fini

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101655

Signed-off-by: Zhongmin Wu <zhongmin.wu@intel.com>
Signed-off-by: Yogesh Marathe <yogesh.marathe@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>

winsys/amdgpu: add BO to the global list only when RADEON_ALL_BOS is set

Only useful when that debug option is enabled.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: update dirty_level_mask before dispatching

This fixes a rendering issue with Hitman when bindless textures
are enabled.

Fixes: 2263610827 ("radeonsi: flush DB caches only when transitioning from DB to texturing")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

anv: set right datatypes in anv_pipeline_binding

This structure contains two fields, binding and index, that store the
binding in the descriptor set and the index inside the binding.

These structures are defined as uint8_t, but the types in Vulkan
specification are uint32_t, so big values are clamp.

This fixes dEQP-VK.binding_model.shader_access.*.multiple_arbitrary_descriptors.*

v2: use UINT32_MAX for index when having no render targets (Tapani)

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

llvmpipe: initialize llvmpipe->dirty with LP_NEW_SCISSOR

If llvmpipe_set_scissor_states() is never called, we still need to be sure
that derived scissor/clip state is updated.  As of commit 743ad599a97d09b1
that function might not be called.

Fixes regressed Piglit gl-1.0-scissor-offscreen -fbo -auto test.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101709
Fixes: 743ad599a97 ("st/mesa: don't set 16 scissors and 16 viewports
if they're unused")
Cc: "17.2" <mesa-stable@lists.freedesktop.org>

i965: Bump the initial program cache size from 4kB to 16kB.

Our initial size of 4kB is way too small to do anything useful, so we
end up growing it at least a few times.  We may as well start it larger.

Some data points:

- Dinoshade (from Mesa Demos): hit 8kB.
- Chromium 60: hit 16kB after browsing a few things in Google Docs.
- GFXBench4 TRex/Manhattan 3.1: hit 128kB
- Unigine Valley 1.0: hit 512kB

It might make sense to start it even larger.

Acked-by: Matt Turner <mattst88@gmail.com>

i965: Issue performance warnings when growing the program cache

This involves a bunch of unnecessary copying, a batch flush, and
state re-emission.

Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: add 2xMSAA and 16xMSAA to DRI configs for Gen9.

Special thanks to Eero Tamminen for reporting rasterizer
numbers being twice what it should be for 2xMSAA under
a benchmark.

Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: define YY_NO_INPUT to prevent unused symbol warnings

Otherwise clang warns:

glsl/glsl_lexer.cpp:3507:16: warning: function 'yyinput' is not needed
and will not be emitted [-Wunneeded-internal-declaration]
    static int yyinput (yyscan_t yyscanner)
               ^

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

blorp: Explicitly cast between different enums

Fixes warnings like

warning: implicit conversion from enumeration type 'enum isl_format' to
different enumeration type 'enum GEN10_SURFACE_FORMAT'
[-Wenum-conversion]
         .SourceElementFormat = ISL_FORMAT_R32_UINT,
                                ^~~~~~~~~~~~~~~~~~~

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

intel/isl: Mark functions used conditionally as UNUSED

The functions we're marking as UNUSED in isl_surface_state.c are used
only when compiling for particular generations.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

intel/isl: Explicitly cast between different enums

Fixes warnings like

warning: implicit conversion from enumeration type 'enum isl_format' to
different enumeration type 'enum GEN10_SURFACE_FORMAT'
[-Wenum-conversion]
         .SourceElementFormat = ISL_FORMAT_R32_UINT,
                                ^~~~~~~~~~~~~~~~~~~

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

intel/isl: Remove 'inline' keywords

Unless you have data, the compiler knows better than you whether a
function should be inlined.

Unlike all other cases in this series, the removal of the inline keyword
from isl_format_has_channel_type actually changes the resulting binary
with gcc-6.3.0:

   text    data     bss     dec     hex filename
7831116  346384  420648 8598148  833284 i965_dri.so before
7830716  346384  420648 8597748  8330f4 i965_dri.so after

I think this is likely an improvement. No difference in the resulting
binary with clang-4.0.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

anv: Mark functions used conditionally as UNUSED

The functions we're marking as UNUSED in genX_pipeline.c are used only
when compiling for particular generations.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

anv: Explicitly cast between different enums

Fixes warnings like

warning: implicit conversion from enumeration type 'enum isl_format' to
different enumeration type 'enum GEN10_SURFACE_FORMAT'
[-Wenum-conversion]
         .SourceElementFormat = ISL_FORMAT_R32_UINT,
                                ^~~~~~~~~~~~~~~~~~~

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

anv: Remove 'inline' keywords

Unless you have data, the compiler knows better than you whether a
function should be inlined.

No difference in the resulting binary with gcc-6.3.0 or clang-4.0.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

anv: Use GNU C empty brace initializer

Avoids Clang's warning about the current code:

   warning: suggest braces around initialization of subobject

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

i965: Add $(WNO_OVERRIDE_INIT) to AM_CFLAGS

brw_surface_formats.c and genX_blorp_exec.c do this a lot, causing lots
of warnings from clang.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

i965: Mark functions used conditionally as UNUSED

The functions we're marking as UNUSED in genX_state_upload.c are used
only when compiling for particular generations.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

i965: Explicitly cast between different enums

Fixes warnings like

warning: implicit conversion from enumeration type 'enum isl_format' to
different enumeration type 'enum GEN10_SURFACE_FORMAT'
[-Wenum-conversion]
         .SourceElementFormat = ISL_FORMAT_R32_UINT,
                                ^~~~~~~~~~~~~~~~~~~

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

i965: Drop unnecessary conditional

Clang doesn't realize that 0 and 1 are the only possibilities, a thinks
lots of variables might be uninitialized.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

i965: Remove some 'inline' keywords

brw_texture_view_sane() is only used by an assert()...

No difference in the resulting binary with gcc-6.3.0 or clang-4.0.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

nir: Remove series of unnecessary conversions

Clang warns:

warning: absolute value function 'fabsf' given an argument of type
'const float64_t' (aka 'const double') but has parameter of type 'float'
which may cause truncation of value [-Wabsolute-value]

            float64_t dst = bit_size == 64 ? fabs(src0) : fabsf(src0);

The type of the ternary expression will be the common type of fabs() and
fabsf(): double. So fabsf(src0) will be implicitly converted to double.
We may as well just convert src0 to double before a call to fabs() and
remove the needless complexity, à la

            float64_t dst = fabs(src0);

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

nir/spirv: Use unreachable("...") rather than assert(!"...")

Quiets a number of uninitialized variable warnings in clang.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

compiler: Add $(WNO_OVERRIDE_INIT) to AM_CFLAGS

nir_intrinsics.h does this a lot, causing lots of warnings from clang.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

configure: Test for -Wno-initializer-overrides

Clang has "-Wno-initializer-overrides", while gcc has
"-Wno-override-init". Quiets a lot of warnings with clang.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

configure: Add and use AX_CHECK_COMPILE_FLAG

This makes it a lot clearer what's happening (at least I think so), and
will make future additions much simpler.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

radv: Add trace ids for secondary buffers.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>