ralloc: Omit detailed license information about talloc.

That information misleads source code auditing tools to think that
ralloc itself is released under LGPL v3.

Instead, simply state talloc is not licensed under a permissive license.

v2: Use wording suggested by Kenneth.

Reviewed-by: Brian Paul <brianp@vmware.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Avoid redundant call to brw_merge_inputs() in brw_try_draw_prims()

We always call brw_merge_inputs() right before looping over the primitives but
this can be called inside the loop for each primitive too. In the case we do it
for the first primitive the call is redundant and can be skipped.

Reviewed-by: Eric Anholt <eric@anholt.net>

glsl: Do not call lhs->variable_referenced() multiple times

Instead take the result from the first call and use it where needed.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

meta: Refactor state save/restore for framebuffer texture blits

Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

wayland: Move version 2 request to end of interface specification

We're moving towards requiring interface additions to be appended to the
end of the interface block.  No functional change, opcodes are assigned as
before, but version 2 additions are now grouped together, which prevents
a scanner warning.

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kristian Høgsberg <krh@bitplanet.net>

glsl: the number of samplers is already calculated so use it

Signed-off-by: Timothy Arceri <t_arceri@yahoo.com.au>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965: Stop doing remapping of "special" regs.

Now that we aren't using pixel_[xy] in live variables, nothing is looking
at these regs after the visitor stage.

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Generalize the pixel_x/y workaround for all UW types.

This is the only case where a fs_reg in brw_fs_visitor is used during
optimization/code generation, and it meant that optimizations had to be
careful to not move pixel_x/y's register number without updating it.

Additionally, it turns out we had a couple of other UW values that weren't
getting this treatment (like gl_SampleID), so this more general fix is
probably a good idea (though I wasn't able to replicate problems with
either pixel_[xy]'s values or gl_SampleID, even when telling the register
allocator to reuse registers immediately)

Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Move has_hiz from the slice to the level.

The value depends only on the level, so no need to store the bool per slice.
Shrinks intel_mipmap_slice from 24 bytes to 16, while slotting into an
existing hole in intel_mipmap_level.

Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

meta: Refactor configuration of renderbuffer sampling

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

meta: Refactor binding of renderbuffer as texture image

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

meta: Merge compiling and linking of blit program

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/blorp: Expose coordinate scissoring and mirroring

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/gen8: Use helper variables for surface parameters

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nv50,nvc0: fix blit 3d path for 1d array textures

Need to adjust coordinates since the shader receives the array index as
depth in z, but the TEX instruction expects it to be the second
coordinate for a 1D array texture. This fixes fbo-generatemipmap-array.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>

nv50,nvc0: leave queries on during blit, turn them on for 2d engine

Fixes the new logic of the conditional rendering piglit test.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>

mesa/st: leave current query enabled during glBlitFramebuffer

Also make sure that pipe_blit_info gets zero'd out so that query isn't
accidentally left enabled.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium: add bit to pipe_blit_info to leave current query enabled

Previously the implication was that queries should be disabled during
blits. However glBlitFramebuffer() is supposed to obey the current
query, and this new bit will indicate that to the driver.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

nv50: fix setting of texture ms info to be per-stage

Different textures may be bound to each slot for each stage. So we need
to be able to upload ms parameters for each one without stages
overwriting each other.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>

nv50/ir: make sure to reverse cond codes on all the OP_SET variants

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: "10.2 10.1" <mesa-stable@lists.freedesktop.org>

freedreno/a2xx: fix compiler warning

Signed-off-by: Rob Clark <robclark@freedesktop.org>

radeonsi: prepare depth export registers at compile time

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

radeonsi: simplify depth/stencil export code

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

radeon/llvm: add support for non-scalar system values

The sample position is one of them.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

radeonsi: add and use a helper function for loading constants

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

radeonsi: only count CS space for state atoms if we're going to draw

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

radeonsi: remove unused variable exports_ps in si_pipe_shader_ps

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

radeonsi: use DRAW_PREAMBLE on CIK

It's the same as setting the 3 regs separately, but shorter, and it also
seems to be required on GFX7.2 and later. This doesn't fix Hawaii.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

r600g: simplify framebuffer state size computation

Take the upper bound. The number doesn't have to absolutely correct, only safe.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

Revert "i965: Fix depth (array slices) computation for 1D_ARRAY render targets."

This reverts commit e6967270c75a5b669152127bb7a746d55f4407a6.

Chris Forbes pointed out that this is broken for texture views which
restrict the number of slices.  He committed a better fix which makes
this unnecessary.

Cc: "10.2" <mesa-stable@lists.freedesktop.org>

egl_dri2: cleanup memory leak in dri2_create_context()

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

ilo: destroy the mutex, if winsys creation fails

Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>

glx/tests: Partially revert commit 51e3569573a7b3f8da0df093836761003fcdc414

C++ does not support designated initializers, thus compilation
is not guaranteed to succeed. Surprisingly gcc 4.6.3 fails to
build the code, while version 4.9.0 compiles it without a hitch.

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78403
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Tested-by: Vinson Lee <vlee@freedesktop.org>

configure: error out if building GBM without dri

Both backends require --enable-dri, and building an empty libgbm
makes little to no sense. Error out at configure to prevent the
user from shooting themselves in the foot.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78225
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

mesa: propagate FragDepthLayout to gl_program

The information was lost during linking, causing the layout to be treated as
FRAG_DEPTH_LAYOUT_NONE.

Signed-off-by: Chia-I Wu <olv@lunarg.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: Rename linker's is_varying_var

Both the ast->IR and linker have functions with this name, but different
behavior.

Rename the linker's version to var_counts_against_varying_limit to be
closer to what it is actually used for.

Suggested by Ian a while back.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

i965: Fix GPU hangs on Broadwell in shaders with some control flow.

According to the documentation, we need to set the source 0 register
type to IMM for flow control instructions that have both JIP and UIP.

Fixes GPU hangs in approximately 10 Piglit tests, 5 es3conform tests,
Unigine Crypt, a WebGL raytracer demo, and several Steam titles.

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75478
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=75878
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=76939
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Tested-by: Kristian Høgsberg <krh@bitplanet.net>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

radeonsi: Enable geometry shaders with LLVM 3.4.1

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
CC: "10.1 10.2" <mesa-stable@lists.freedesktop.org>

configure.ac: Add LLVM_VERSION_PATCH to DEFINES

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
CC: "10.1 10.2" <mesa-stable@lists.freedesktop.org>

docs: Import 10.1.3 release notes, andd news item.

st/xa: Fix performance regression introduced by commit "Cache render target surface"

The mentioned commit has the nasty side-effect of turning off accelerated
copies.

Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Thomas Hellstrom <thellstrom@vmware.com>
Reviewed-by: Jakob Bornecrantz <jakob@vmware.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>

clover: Destory pipe_screen when device does not support compute v2

v2:
  - Make sure screen was successfully created before destroying it.

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

pipe-loader: Don't destroy the winsys in the sw loader

The screen takes ownership of the winsys, and is responsible for
destroying it.  Users of pipe-loader should make sure they destory
and  screens they've created to avoid memory leaks.

This fixes a crash in clover introduced by
ce6c17c0833032e91a2d1b34f9eb80c738a854a2 where the pipe-loader was
destroying the winsys while a screen was still using it.

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

i965/Gen8: Set up layer constraints properly for depth buffers

Same issues as the previous commit fixed for Gen7:
- Bogus physical->logical layer conversion; depth/stencil surfaces
  are still IMS layout on Gen8.
- mt_layer ignored in layered rendering case, which breaks handling
  of views with MinLayer.
- Render target array extent not set correctly for arrays.

I'm not able to test this one since I can't get a Broadwell yet, but
it's the same set of fixes as for Gen7.

V2: Restore the MAX2() to account for zero depth/layer_count.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/Gen7: Set up layer constraints properly for depth buffers

Again, a few problems:
- Layered attachments did not honor MinLayer.
- Non-layered MSAA attachments rendered to the wrong layer due to
  dividing by the layer count. All depth buffers use the IMS layout, so
  the physical layer count == logical layer count.
- Layered attachments were not limited to irb->layer_count, so we could
  render off the end of the texture.

V2: Restore the MAX2() to account for zero depth/layer_count.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/Gen8: Set up layer constraints properly for renderbuffers

Fixing the same issues the previous commit does for Gen7.

Note that I can't test this one, since I don't have a Broadwell.

V2: Restore the MAX2() to account for zero depth/layer_count.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/Gen7: Set up layer constraints properly for renderbuffers

There were a few problems here, which mostly just broke layered
rendering into a view:

- Render target view extent was always set to be == depth. This is
  benign for non-layered-rendering, but allows writes off the end of the
  render target for layered rendering, which ends badly.
- Layered rendering did not honor the mt_layer setting, so would not
  properly handle MinLayer being set on a view.

V2: Restore the MAX2() to account for zero depth/layer_count.

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Fix typo in assert message

Signed-off-by: Chris Forbes <chrisf@ijw.co.nz>

radeonsi: Don't use anonymous struct trick in atom tracking

I'm somewhat impressed that current gccs will let you do this, but
sufficiently old ones (including 4.4.7 in RHEL6) won't.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Adam Jackson <ajax@redhat.com>

llvmpipe: change LP_MAX_SHADER_INSTRUCTIONS limit definition.

When the limit was changed to be defined in terms of LP_MAX_SHADER_VARIANTS
(75f1fea14f524ef05e980d825fda3ae226ae2ffe) when it was increased, this
inadvertently lowered the limit in some branches (that have a lower
LP_MAX_SHADER_VARIANTS number) when merged. So, make sure the limit is always
at least the number it once was.

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

draw: do not use draw_get_option_use_llvm() inside draw execution paths

1c73e919a4b4dd79166d0633075990056f27fd28 made it possible to not allocate
the tgsi machine if llvm was used. However, draw_get_option_use_llvm() is
not reliable after draw context creation, since drivers can explicitly
request a non-llvm draw context even if draw_get_option_use_llvm() would
return true (and softpipe does just that) which leads to crashes.
Thus use draw->llvm to determine if we're using llvm or not instead (and
make draw->llvm available even if HAVE_LLVM is false so we don't have to put
even more ifdefs).

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Brian Paul <brianp@vmware.com>

i965: Fix depth (array slices) computation for 1D_ARRAY render targets.

1D array targets store the number of slices in the Height field.

Fixes Piglit's spec/!OpenGL 3.2/layered-rendering/clear-color-all-types
1d_array single_level, at least when used with Meta clears.

Cc: "10.2 10.1 10.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

mesa: Fix MaxNumLayers for 1D array textures.

1D array targets store the number of slices in the Height field.

Cc: "10.2 10.1 10.0" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>

i965: Enable GL_ARB_texture_view on Broadwell.

This is a port of commit c9c08867ed07ceb10b67ffac5f0a33812710a5e8.
A tiny bit of extra work was necessary to not break stencil texturing.

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>

mesa: pass target through to driver when choosing texture format

This only matters for TextureView where the texObj's target has not been
set yet, in all other instances, texObj->target should be the same as
the passed-in target parameter.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Brian Paul <brianp@vmware.com>

nv50/ir/gk110: fix set with f32 dest

Should fix comparison opcodes like SGE/SLT/etc which expected a float to
be returned. These were previously getting integer 0/-1 values.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ben Skeggs <bskeggs@redhat.com>
Cc: 10.2 <mesa-stable@lists.freedesktop.org>

nv50/ir: allow load propagation when flags are defined

The old condition disallowed load propagation any time flags were
defined, even with e.g. set and a constbuf reference. The new condition
disallows it only with immediate propagation. (There are no opcodes that
set the condition flag and have an immediate argument.)

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

mesa/st: pass 4-offset TG4 without lowering if supported

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

gallium: add a cap for supporting 4-offset TG4 opcodes

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

svga: add switch case for PIPE_SHADER_CAP_PREFERRED_IR, remove default case

Remove default switch case so we're warned of missing cases at compile
time.

Reviewed-by: José Fonseca <jfonseca@vmware.com>

tgsi: add missing switch cases in tgsi_exec_get_shader_param()

Add cases for PIPE_SHADER_CAP_MAX_SAMPLER_VIEWS and
PIPE_SHADER_CAP_PREFERRED_IR.  Remove default switch case so we
learn of missing cases at compile time.

Reviewed-by: José Fonseca <jfonseca@vmware.com>

gallivm: add PIPE_SHADER_CAP_PREFERRED_IR switch case, remove default

Return PIPE_SHADER_IR_TGSI for the PIPE_SHADER_CAP_PREFERRED_IR query.
Remove default switch case so we learn of missing switch cases at
compile time.

Reviewed-by: José Fonseca <jfonseca@vmware.com>

gallium: remove enum numbers from shader cap queries

The enum numbers were just cruft.

Reviewed-by: Michel Dänzer <michel@daenzer.net>

linker: Fix consumer_inputs_with_locations indexing

In an earlier incarnation of populate_consumer_input_sets and
get_matching_input, the consumer_inputs_with_locations array was indexed
using the user-specified location.  In that version, only user-defined
varyings were included in the array.

In the current incarnation, the Mesa location is used to index the
array, and built-in varyings are included.

This change fixes the unit test to exepect gl_ClipDistance in the array,
and it resizes the arrays to actually be big enough.  It's just dumb
luck that the existing piglit tests use small enough locations to not
stomp the stack. :(

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=78258
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Cc: Vinson Lee <vlee@freedesktop.org>

st/wgl: Advertise WGL_ARB_create_context(_profile).

We added wglCreateContextAttribsARB but not the extension strings.

This allows creation of GL 3.x contexts.

Reviewed-by: Brian Paul <brianp@vmware.com>

st/wgl: Honour request of 3.1 contexts through core profile where available.

Port 5f493eed69f6fb11239c04119d602f1c23a68cbd from GLX.

Reviewed-by: Brian Paul <brianp@vmware.com>

meta: Only clear the requested color buffers.

This path is used to implement both glClear and glClearBuffer; the
latter is only supposed to clear particular buffers.  Core Mesa provides
us that information in the buffers bitmask; we must only clear buffers
mentioned there.

To accomplish this, we save/restore the color draw buffers state, and
use glDrawBuffers to restrict drawing to the relevant buffers.

Fixes Piglit's spec/!OpenGL 3.0/clearbuffer-mixed-formats and
spec/ARB_framebuffer_object/fbo-drawbuffers-none glClearBuffer tests
for drivers using meta clears (such as Broadwell).

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77852
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77856
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

meta: Add infrastructure for saving/restoring the DrawBuffers state.

Sometimes we need to configure what draw buffers we render to, without
creating a new FBO.  This path will make that possible.

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

meta: Add a new MESA_META_DRAW_BUFFERS bit.

This will be used for saving/restoring the glDrawBuffers state.
For now, make sure that existing users of MESA_META_ALL don't get
the new bit, since they probably won't want it.

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

meta: Unify the GLSL and fixed-function clear paths.

The majority of _mesa_meta_Clear and _mesa_meta_glsl_Clear was the same;
adding a boolean for whether to use GLSL allows us to share most of it
without polluting either path too much.

Tested for regressions by hacking i965 to always use the non-GLSL path.

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

i965: Always intel_prepare_render() after invalidating front buffers.

Fixes glean/texture_srgb, which hit recursive-flush prevention
assertions in vbo_exec_FlushVertices.

This probably hurts the performance of front buffer rendering, but
very few people in their right mind do front buffer rendering.

Fixes Glean's texture_srgb test.

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Acked-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

radeonsi: implement ARB_texture_cube_map_array

No LLVM changes needed.

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
v2: updated GL3.txt and relnotes

configure.ac: radeonsi requires EGL_DRM and GBM

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

glsl: fix bogus layout qualifier warnings

Print out GL_ARB_explicit_attrib_location warnings only
when parsing attribute that uses "location" qualifier.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=77245
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Cc: "10.1 10.2" <mesa-stable@lists.freedesktop.org>

docs: Import 10.1.2 release notes, andd news item.

st/egl: Flush resources before presentation (android - bug 77966)

[olv: Use the real name provided by the patch author.  Ideally this could be
moved to somewhere higher level so that we would not need to create a pipe
context to flush resources.  Plus, it is not clear if flushing resources for
another context is valid.]

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>

docs: mark ARB_stencil_texturing as done for nv50+/r600+

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

mesa/st: implement ARB_stencil_texturing

If StencilSampling is enabled on the texture object, pass in an
equivalent stencil-only format.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

nv50,nvc0: add X8Z24_UNORM, fix stencil-only formats

S8_UINT will become useful when ARB_texture_stencil8 becomes supported by
mesa. The other stencil formats are needed for ARB_stencil_texturing.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

xa: fix segfault

Fixes:

  Program received signal SIGSEGV, Segmentation fault.
  bind_samplers (comp=0x21b054, comp=0x21b054, ctx=0x211430)
      at ../../../../../src/gallium/state_trackers/xa/xa_composite.c:445
  445 mask_pic->srf->tex->format);
  (gdb) bt
  #0  bind_samplers (comp=0x21b054, comp=0x21b054, ctx=0x211430)
      at ../../../../../src/gallium/state_trackers/xa/xa_composite.c:445
  #1  xa_composite_prepare (ctx=0x211430, comp=comp@entry=0x21b054)
      at ../../../../../src/gallium/state_trackers/xa/xa_composite.c:488
  #2  0xb6f454b4 in XAPrepareComposite (op=<optimized out>, pSrcPicture=<optimized out>,
      pMaskPicture=<optimized out>, pDstPicture=<optimized out>, pSrc=0x5b3ad8, pMask=0x0,
      pDst=0x5923b8) at msm-exa-xa.c:533

We can't yet handle solid fill mask, so explicitly reject that, rather
than segfaulting.  Otherwise DDX would need to check XA version to see
if solid fill mask were supported.

Signed-off-by: Rob Clark <robclark@freedesktop.org>

i965: Set miptree target field when creating from a BO.

Prior to commit 8435b60a3577d2d905eae189cd7e770500177e99, the region
equivalent of this function called intel_miptree_create_layout, which
set mt->target to target.  With that commit, it no longer copied target.

Piglit's ext_image_dma_buf_import-sample_[xa]rgb8888 tests would then
hit an assertion failure, where image->TexObject->Target was
GL_TEXTURE_EXTERNAL_OES, and mt->target was GL_TEXTURE_2D.

Copying the target fixes this assertion failure.

Cc: "10.2" <mesa-stable@lists.freedesktop.org>
Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: Bump version to 10.3-devel

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>

docs: Add missing release notes for ARB_separate_shader_objects

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reported-by: Ilia Mirkin <imirkin@alum.mit.edu>

i965: Move push constant state packets to push constant update time.

-0.553779% +/- 0.423394% effect on cairo-perf-trace runtime on glamor
(n=612)

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Merge gen8_upload_constant_state into gen7_upload_constant_state.

The two paths are really similar, and the extra conditionals will be
dwarfed by the cost of the actual upload.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Refactor gen7_upload_constant_state to look more like gen8.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Drop unnecessary state flag for units on NEW_BINDING_TABLE.

Commit 30259856a8a82a55c030df1ad052e505c61144bc moved the state packets to
table generation time, but forgot to make this change.  Apparently the
performance win there was about not reemitting the table pointers on
unrelated state changes.

No performance difference on cairo on glamor (n=118).

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/gen7+: Move sampler state packets to the stage sampler state table update.

Now that we have the stage state coming into our setup of sampler states,
it's easy to drop an identifier into it of which stage the stage_state is,
and then look up which packet to emit in a little table.

No performance difference on cairo on glamor (n=492).

v2: Don't forget to do the workaround flush on IVB.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/gen6: Don't update unit state when samplers change.

There's no remaining dependency between these two packets that I can find.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Drop a NEW_SAMPLER annotation for use of sampler_count.

The sampler count is set up from the gl_program at draw time, not at
sampler change time.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Simplify sampler setup by passing the stage state.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Make batch dumping go to stderr, too.

All our other debug goes there.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Fix a stale comment reference

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glx: Conditionally compile GLX_MESA_query_renderer DRI3 support

Missed out with commit 625bdd64e5ea3327d4459b1ccccff8dab89129d0.

Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

radeonsi: add Mullins pci ids.

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: add support for Mullins asics.

v2: name defaults to kabini for older llvm
v3: fix llvm version check

Signed-off-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Tom Stellard <thomas.stellard@amd.com>

configure: bump up libdrm_radeon requirement to 2.4.54

Required for Mullins.

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

dri3: Enable GLX_MESA_query_renderer on DRI3 too

This should have happend around the time of commit 4680d23, but Keith's
DRI3 patches and my GLX_MESA_query_renderer patches crossed in the mail.

I don't have a working DRI3 setup, so I haven't been able to actually
verify this.  I'm hoping that someone can piglit this for me on DRI3...
It's also unfortunate the DRI2 and DRI3 can't share more code.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: Keith Packard <keithp@keithp.com>
Cc: "10.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Emil Velikov <emil.l.velikov@gmail.com>

util: Don't attempt to redefine INFINITY/NAN on VS 2013.

There are now provided by VS.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

mesa: VS 2013 does not provide strcasecmp.

A define is necessary, like for earlier VS versions.

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>