anv/formats: Nicely handle unknown VkFormat enums

This fixes some crashes in the dEQP-VK.memory.requirements.core.* tests.
I'm not sure whether or not passing out-of-bound formats into the query
is supposed to be allowed but there's no harm in protecting ourselves
from it.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Bugzilla: https://bugs.freedesktop.org/101956
Cc: mesa-stable@lists.freedesktop.org

vbo: fix offset in minmax cache key

Instead of saving primitive offset in the minmax cache key,
save the actual buffer offset which is used in the cache lookup.

Fixes rendering artifact seen with GoogleEarth when run with
VMware driver.

v2: Per Brian's comment, initialize offset to avoid compiler warning.

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Brian Paul <brianp@vmware.com>

anv: fix build errors on android

error: incompatible pointer to integer conversion initializing 'VkFence'
   (aka 'unsigned long long') with an expression of type 'void *' [-Werror,-Wint-conversion]

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

winsys/amdgpu: set AMDGPU_GEM_CREATE_VM_ALWAYS_VALID if possible v2

When the kernel supports it set the local flag and
stop adding those BOs to the BO list.

Can probably be optimized much more.

v2: rename new flag to AMDGPU_GEM_CREATE_VM_ALWAYS_VALID

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: set a per-buffer flag that disables inter-process sharing (v4)

For lower overhead in the CS ioctl.
Winsys allocators are not used with interprocess-sharable resources.

v2: It shouldn't crash anymore, but the kernel will reject the new flag.
v3 (christian): Rename the flag, avoid sending those buffers in the BO list.
v4 (christian): Remove setting the kernel flag for now

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

i965: Use BLORP for buffer object stall avoidance blits instead of BLT.

Improves performance of GFXBench4 tests at 1024x768 on a Kabylake GT2:
- Manhattan 3.1 by 1.32134% +/- 0.322734% (n=8).
- Car Chase by 1.25607% +/- 0.291262% (n=5).

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Always flush caches after blitting to a GL buffer object.

When we blit data into a buffer object, we may need to invalidate any
caches that might contain stale data, so the new data becomes visible.

For example, if the buffer object is bound as a vertex buffer, we need
to invalidate the vertex fetch cache.

While this flushing was missing, it usually happened implicitly for
non-obvious reasons: we're usually on the render ring, and calling
intel_emit_linear_blit() would require switching to the BLT ring,
causing an implicit flush.  This likely provoked the kernel to do
PIPE_CONTROLs on our behalf.  Although, Gen4-5 wouldn't have this
behavior.  At any rate, we should do it ourselves.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Add PIPE_CONTRTOL_DATA_CACHE flush to brw_emit_mi_flush().

Although we're phasing out brw_emit_mi_flush(), we still use it in some
places in order to "flush everything".  In a number of those places, we
write data to a buffer that we may then bind as an image surface, SSBO,
or atomic buffer.  Those usages require us to flush the data cache.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

i965: Add a brw_blorp_copy_buffers() command.

This exposes the new blorp_copy_buffer() functionality to i965.
It should be a drop-in replacement for intel_emit_linear_blit()
(other than the arguments being backwards, for consistency with BLORP).

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

blorp: Make blorp_buffer_copy work on Gen4-6.

Gen4-6 can only handle surfaces up to 8192.  Only Gen7+ can do 16384.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

blorp: Turn anv_CmdCopyBuffer into a blorp_buffer_copy() helper.

I want to be able to copy between buffer objects using BLORP in the i965
driver.  Anvil already had code to do this, in a reasonably efficient
manner - first using large bpp copies, then smaller bpp copies.

This patch moves that logic into BLORP as blorp_buffer_copy(), so we
can use it in both drivers.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

radv: don't assert on empty hash table

Currently if table_size is 0, it's falling through to:

unreachable("hash table should never be full");

But table_size can be 0 when RADV_DEBUG=nocache is set, or when the
table allocation fails (which is not considered an error).

Fixes: f4e499ec791 "radv: add initial non-conformant radv vulkan driver"
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

svga: include sample count in surface_size() computation

Use MAX2() because sampleCount will be zero for non-MSAA surfaces.
No Piglit regressions.

Reviewed-by: Charmaine Lee <charmainel@vmware.com>

i965: drop unused brw->needs_unlit_centroid_workaround

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->has_surface_tile_offset in favor of devinfo's

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop unused brw->no_simd8

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop unused brw->has_pln

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->must_use_separate_stencil in favor of devinfo's

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop unused brw->has_negative_rhw_bug

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop unused brw->has_compr4

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->has_llc in favor of devinfo->has_llc

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->is_broxton

We need to take some take here as brw->is_broxton has been used to
check whether the device is a low power gen9 (aka Atom gen9 platform).

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->is_cherryview in favor of devinfo->is_cherryview

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->is_haswell in favor of devinfo->is_haswell

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->is_baytrail in favor of devinfo->is_baytrail

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->is_g4x in favor of devinfo->is_g4x

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->gt in favor of devinfo->gt

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

i965: drop brw->gen in favor of devinfo->gen

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

anv: use device->info instead of brw->is_*

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

Revert "egl: Allow creation of per surface out fence"

This reverts commit 13c23b19d0b3b965d666498eb759e63fc4a625d9.

Mesa CI was brought down by this commit, with:

mesa/drivers/dri/i965/brw_sync.c:491: brw_dri_create_fence_fd:
Assertion `brw->screen->has_exec_fence' failed.

i965: add 2xMSAA 16xMSAA modes to DRI configs.

For Gen8, add 2xMSAA. For Gen9, add 2xMSAA and 16xMSAA.
Special thanks to Eero Tamminen for reporting rasterizer
numbers being twice what it should be for 2xMSAA under
a benchmark.

V2: Make pointer name less ugly + add 2xMSAA for Gen8

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

Revert "i965: add 2xMSAA and 16xMSAA to DRI configs for Gen9."

This reverts commit f6d38785e8b28a6dd303884798b823e289817741.

Kevin's original patch accidentally didn't add 2x for Gen8; he sent
a v2 with a bunch of style fixes shortly after I pushed the original
patch, not knowing it was coming.  Let's just revert this one, apply
v2, and move on.

mesa/st: remove unwanted backup file

Fixes: 0ac78dc92582a59d4319 "util: move string_to_uint_map to glsl"
Cc: Emil Velikov <emil.velikov@collabora.com>
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

egl/dri2: only destroy created objects

dri2_display_destroy may be called by dri2_initialize_wayland_drm() if
initialization fails. In this case, these objects may not be initialized.

Cc: mesa-stable@lists.freedesktop.org
Signed-off-by: Michael Olbrich <m.olbrich@pengutronix.de>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

egl: Allow creation of per surface out fence

Add plumbing to allow creation of per display surface out fence.

Currently enabled only on android, since the system expects a valid
fd in ANativeWindow::{queue,cancel}Buffer. We pass a fd of -1 with
which native applications such as flatland fail. The patch enables
explicit sync on android and fixes one of the functional issue for
apps or buffer consumers which depend upon fence and its timestamp.

v2: a) Also implement the fence in cancelBuffer.
    b) The last sync fence is stored in drawable object
       rather than brw context.
    c) format clear.

v3: a) Save the last fence fd in DRI Context object.
    b) Return the last fence if the batch buffer is empty and
       nothing to be flushed when _intel_batchbuffer_flush_fence
    c) Add the new interface in vbtl to set the retrieve fence

v3.1 a) close fd in the new vbtl interface on none Android platform

v4: a) The last fence is saved in brw context.
    b) The retrieve fd is for all the platform but not just Android
    c) Add a uniform dri2 interface to initialize the surface.

v4.1: a) make some changes of variable name.
      b) the patch is broken into two patches.

v4.2: a) Add a deinit interface for surface to clear the out fence

v5: a) Add enable_out_fence to init, platform sets it true or
       false
    b) Change get fd to update fd and check for fence
    c) Commit description updated

v6: a) Heading and commit description updated
    b) enable_out_fence is set only if fence is supported
    c) Review comments on function names
    d) Test with standalone patch, resolves the bug

v6.1: Check for old display fence reverted

v6.2: enable_out_fence initialized to false by default,
      dri2_surf_update_fence_fd updated, deinit changed to fini

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101655

Signed-off-by: Zhongmin Wu <zhongmin.wu@intel.com>
Signed-off-by: Yogesh Marathe <yogesh.marathe@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tomasz Figa <tfiga@chromium.org>

winsys/amdgpu: add BO to the global list only when RADEON_ALL_BOS is set

Only useful when that debug option is enabled.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: update dirty_level_mask before dispatching

This fixes a rendering issue with Hitman when bindless textures
are enabled.

Fixes: 2263610827 ("radeonsi: flush DB caches only when transitioning from DB to texturing")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

anv: set right datatypes in anv_pipeline_binding

This structure contains two fields, binding and index, that store the
binding in the descriptor set and the index inside the binding.

These structures are defined as uint8_t, but the types in Vulkan
specification are uint32_t, so big values are clamp.

This fixes dEQP-VK.binding_model.shader_access.*.multiple_arbitrary_descriptors.*

v2: use UINT32_MAX for index when having no render targets (Tapani)

Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

llvmpipe: initialize llvmpipe->dirty with LP_NEW_SCISSOR

If llvmpipe_set_scissor_states() is never called, we still need to be sure
that derived scissor/clip state is updated.  As of commit 743ad599a97d09b1
that function might not be called.

Fixes regressed Piglit gl-1.0-scissor-offscreen -fbo -auto test.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101709
Fixes: 743ad599a97 ("st/mesa: don't set 16 scissors and 16 viewports
if they're unused")
Cc: "17.2" <mesa-stable@lists.freedesktop.org>

i965: Bump the initial program cache size from 4kB to 16kB.

Our initial size of 4kB is way too small to do anything useful, so we
end up growing it at least a few times.  We may as well start it larger.

Some data points:

- Dinoshade (from Mesa Demos): hit 8kB.
- Chromium 60: hit 16kB after browsing a few things in Google Docs.
- GFXBench4 TRex/Manhattan 3.1: hit 128kB
- Unigine Valley 1.0: hit 512kB

It might make sense to start it even larger.

Acked-by: Matt Turner <mattst88@gmail.com>

i965: Issue performance warnings when growing the program cache

This involves a bunch of unnecessary copying, a batch flush, and
state re-emission.

Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: add 2xMSAA and 16xMSAA to DRI configs for Gen9.

Special thanks to Eero Tamminen for reporting rasterizer
numbers being twice what it should be for 2xMSAA under
a benchmark.

Signed-off-by: Kevin Rogovin <kevin.rogovin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

glsl: define YY_NO_INPUT to prevent unused symbol warnings

Otherwise clang warns:

glsl/glsl_lexer.cpp:3507:16: warning: function 'yyinput' is not needed
and will not be emitted [-Wunneeded-internal-declaration]
    static int yyinput (yyscan_t yyscanner)
               ^

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

blorp: Explicitly cast between different enums

Fixes warnings like

warning: implicit conversion from enumeration type 'enum isl_format' to
different enumeration type 'enum GEN10_SURFACE_FORMAT'
[-Wenum-conversion]
         .SourceElementFormat = ISL_FORMAT_R32_UINT,
                                ^~~~~~~~~~~~~~~~~~~

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

intel/isl: Mark functions used conditionally as UNUSED

The functions we're marking as UNUSED in isl_surface_state.c are used
only when compiling for particular generations.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

intel/isl: Explicitly cast between different enums

Fixes warnings like

warning: implicit conversion from enumeration type 'enum isl_format' to
different enumeration type 'enum GEN10_SURFACE_FORMAT'
[-Wenum-conversion]
         .SourceElementFormat = ISL_FORMAT_R32_UINT,
                                ^~~~~~~~~~~~~~~~~~~

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

intel/isl: Remove 'inline' keywords

Unless you have data, the compiler knows better than you whether a
function should be inlined.

Unlike all other cases in this series, the removal of the inline keyword
from isl_format_has_channel_type actually changes the resulting binary
with gcc-6.3.0:

   text    data     bss     dec     hex filename
7831116  346384  420648 8598148  833284 i965_dri.so before
7830716  346384  420648 8597748  8330f4 i965_dri.so after

I think this is likely an improvement. No difference in the resulting
binary with clang-4.0.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

anv: Mark functions used conditionally as UNUSED

The functions we're marking as UNUSED in genX_pipeline.c are used only
when compiling for particular generations.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

anv: Explicitly cast between different enums

Fixes warnings like

warning: implicit conversion from enumeration type 'enum isl_format' to
different enumeration type 'enum GEN10_SURFACE_FORMAT'
[-Wenum-conversion]
         .SourceElementFormat = ISL_FORMAT_R32_UINT,
                                ^~~~~~~~~~~~~~~~~~~

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

anv: Remove 'inline' keywords

Unless you have data, the compiler knows better than you whether a
function should be inlined.

No difference in the resulting binary with gcc-6.3.0 or clang-4.0.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

anv: Use GNU C empty brace initializer

Avoids Clang's warning about the current code:

   warning: suggest braces around initialization of subobject

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

i965: Add $(WNO_OVERRIDE_INIT) to AM_CFLAGS

brw_surface_formats.c and genX_blorp_exec.c do this a lot, causing lots
of warnings from clang.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

i965: Mark functions used conditionally as UNUSED

The functions we're marking as UNUSED in genX_state_upload.c are used
only when compiling for particular generations.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

i965: Explicitly cast between different enums

Fixes warnings like

warning: implicit conversion from enumeration type 'enum isl_format' to
different enumeration type 'enum GEN10_SURFACE_FORMAT'
[-Wenum-conversion]
         .SourceElementFormat = ISL_FORMAT_R32_UINT,
                                ^~~~~~~~~~~~~~~~~~~

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

i965: Drop unnecessary conditional

Clang doesn't realize that 0 and 1 are the only possibilities, a thinks
lots of variables might be uninitialized.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

i965: Remove some 'inline' keywords

brw_texture_view_sane() is only used by an assert()...

No difference in the resulting binary with gcc-6.3.0 or clang-4.0.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

nir: Remove series of unnecessary conversions

Clang warns:

warning: absolute value function 'fabsf' given an argument of type
'const float64_t' (aka 'const double') but has parameter of type 'float'
which may cause truncation of value [-Wabsolute-value]

            float64_t dst = bit_size == 64 ? fabs(src0) : fabsf(src0);

The type of the ternary expression will be the common type of fabs() and
fabsf(): double. So fabsf(src0) will be implicitly converted to double.
We may as well just convert src0 to double before a call to fabs() and
remove the needless complexity, à la

            float64_t dst = fabs(src0);

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

nir/spirv: Use unreachable("...") rather than assert(!"...")

Quiets a number of uninitialized variable warnings in clang.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

compiler: Add $(WNO_OVERRIDE_INIT) to AM_CFLAGS

nir_intrinsics.h does this a lot, causing lots of warnings from clang.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

configure: Test for -Wno-initializer-overrides

Clang has "-Wno-initializer-overrides", while gcc has
"-Wno-override-init". Quiets a lot of warnings with clang.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

configure: Add and use AX_CHECK_COMPILE_FLAG

This makes it a lot clearer what's happening (at least I think so), and
will make future additions much simpler.

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

radv: Add trace ids for secondary buffers.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

ac/debug: Support multiple trace ids for nested IBs.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

radv/amdgpu: Enable dumping of all IBs with RADV_DEBUG=allbos.

Signed-off-by: Bas Nieuwenhuizen <basni@google.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

egl/wayland: make sure HAS_$FORMAT is set for wl_dmabuf

Otherwise eglCreateWaylandBufferFromImageWL will fail, since we
have no "supported" format.

Fixes: 02cc35937277 ("egl/wayland: Use linux-dmabuf interface for buffers")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

egl/wayland: group wl_win specific code together

Make the code a bit easier to follow. There should be no functional
change since none of the bits set are accessible until the
eglCreateWindowSurface call is complete.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

egl/wayland: remove dri2_surf width/height double init.

The dimensions are already set [to 0 or the value provided by the
attributes list] by the _eglInitSurface() call further up.

The values are updated, as the DRI driver calls the DRI2/IMAGE_LOADER'
get_buffers, shortly before making use of the values.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Acked-by: Daniel Stone <daniels@collabora.com>

egl/wayland: set correct format with wl_dmabuf as wl_drm is missing

For most/all cases today, we have wl_drm available alongside wl_dmabuf.
Yet in the long run, we want to make sure the latter can operate without
any traces of the former.

Fixes: 02cc35937277 ("egl/wayland: Use linux-dmabuf interface for buffers")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

egl/wayland: update comment to reflect wl_dmabuf presence

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

egl/wayland: polish object teardown in dri2_wl_destroy_surface

The wl_drm wrapper is created before the wl display/surface ones.
Thus make sure we destroy it after them. In reality it should not make
any difference either way.

Fixes: 03dd9a88b0b ("egl/wayland: Use per-surface event queues")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

egl/wayland: plug leaks in dri2_wl_create_window_surface() error path

We forgot to teardown the wl display/surface wrappers.

Fixes: 03dd9a88b0b ("egl/wayland: Use per-surface event queues")
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>

egl: simplify refcounting after screen creation

If the specific initialize was successfull, dri2_egl_display() will
return a non NULL pointer. Thus we can drop the check and flatten the
codeflow.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>
Acked-by: Daniel Stone <daniels@collabora.com>

util: move string_to_uint_map to glsl

The functionality is used by glsl and mesa. With the latter already
depending on the former.

With this in place the src/util/ static library libmesautil.la no longer
has a C++ dependency. Thus objects which use it (like libEGL) don't need
the C++ link.

Cc: "17.2" <mesa-stable@lists.freedesktop.org>
Fixes: 02cc35937277 ("egl/wayland: Use linux-dmabuf interface for buffers")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101851
Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Suggested-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Mike Lothian <mike@fireburn.co.uk>
Tested-by: James Harvey <lothmordor@gmail.com>

st/mesa: fix XPD lowering - don't read dst

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102461

Reviewed-by: Brian Paul <brianp@vmware.com>

anv: Add support for the SYNC_FD handle type for fences

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Implement VK_KHR_external_fence

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Use DRM sync objects to back fences whenever possible

In order to implement VK_KHR_external_fence, we need to back our fences
with something that's shareable.  Since the kernel wait interface for
sync objects already supports waiting for multiple fences in one go, it
makes anv_WaitForFences much simpler if we only have one type of fence.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv/gem: Add support for syncobj wait and reset

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv/gem: Add a flags parameter to syncobj_create

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

drm-uapi: Update headers from drm-next

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

vulkan/util: Add a vk_zalloc helper

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Rename anv_fence_state to anv_bo_fence_state

It only applies to legacy BO fences.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Pull the guts of anv_fence into anv_fence_impl

This is just a refactor, similar to what we did for semaphores, in
preparation for handling VK_KHR_external_fence.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv/wsi: Use QueueSubmit to trigger the fence in AcquireNextImage

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv: Rework fences to work more like BO semaphores

This commit changes fences to work a bit more like BO semaphores.
Instead of the fence being a batch, it's simply a BO that gets added
to the validation list for the last execbuf call in the QueueSubmit
operation.  It's a bit annoying finding the last submit in the execbuf
but this allows us to avoid the dummy execbuf.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

anv/queue: Allow temporary import of SYNC_FD semaphores

We didn't allow them before because it didn't look like the spec allowed
it.  It certainly doesn't make much sense.  However, there are CTS tests
that apparently hit this.  What the spec actually says is:

    "Importing a payload using handle types with copy transference
    creates a duplicate copy of the payload at the time of import, but
    makes no further reference to it. Fence signaling, waiting, and
    resetting operations performed on the target of copy imports must
    not affect any other fence or payload."

A SYNC_FD has copy transference but the import may be temporary or
permanent.  If you do a permanent import of something with copy
transference, I guess it's supposed to work and end up resetting the
permanent state.  In any case, there seems to be no real harm in
allowing it, so why not.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965: Fix whitespace issues in intel_buffer_objects.c.

Convert tabs to spaces and rewrap one long line.

radeonsi: stop leaking nir

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

ac/nir: remove misleading condition

location is never set to INTERP_SAMPLE, and Nicolai comments:
"... that part is misleading. location refers to the base location, not
the final location of the sample, and it can never be INTERP_SAMPLE."

Suggested-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>

ac/nir: silence maybe-uninitialized warnings

These are likely false positives, but are also annoying because they
show up on every "make install", which causes ac_nir_to_llvm to be
rebuilt here. Initializing those variables to NULL should be harmless
even when unnecessary.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radv: clear dynamic_shader_stages on create

Valgrind reports it's being used uninitialized.

Fixes: f4e499ec791 "radv: add initial non-conformant radv vulkan driver"
Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>

amd: add .editorconfig

amd/common/ and amd/vulkan/ are using tabs for indent, which doesn't
match the settings in root .editorconfig, so let's override.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Acked-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: rewrite late alloc VS limit computation

This is still very simple, but it's better than before.

Loosely ported from Vulkan.

gallium/radeon: set EVENT_WRITE_EOP.INT_SEL = wait for write confirmation

Ported from Vulkan.
Not sure what this is good for.. maybe write confirmation from L2 flushes?

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium/u_threaded: rename IGNORE_VALID_RANGE -> NO_INFER_UNSYNCHRONIZED

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium/u_threaded: disallow discard_range if map_buffer is unsynchronized

The discard range codepath takes precedence, so if we get both
unsynchronized and discard_range, choose unsynchronized.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

nir: Fix system_value_from_intrinsic for subgroups

A couple of the cases were backwards

Reviewed-by: Matt Turner <mattst88@gmail.com>
Cc: mesa-stable@lists.freedesktop.org

nir: Fix some whatespace

Somehow tabs got in there...

Reviewed-by: Matt Turner <mattst88@gmail.com>

radeonsi: correct maximum wave count per SIMD

v2: don't special-case Tonga and Iceland.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

docs: update calendar, add news item and link release notes for 17.1.8

Signed-off-by: Andres Gomez <agomez@igalia.com>