i965/vs: Set uses_vertexid and friends from brw_compile_vs

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Move multiply by 4 for VS ATTR setup into the scalar backend.

The vec4 backend will want to count in units of vec4s, not scalar
components.  The simplest solution is to move the multiplication by 4
into the scalar backend.  This also improves consistency with how we
count varyings.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/nir: Inline remap_vs_attrs

Now that we have nice block iterators, there's no good reason for this
to be off on it's own.  While we're here, we convert to using the NIR
const index getters/setters instead of whacking const_index values
directly.

Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nir: Embed the shader_info in the nir_shader again

Commit e1af20f18a86f52a9640faf2d4ff8a71b0a4fa9b changed the shader_info
from being embedded into being just a pointer.  The idea was that
sharing the shader_info between NIR and GLSL would be easier if it were
a pointer pointing to the same shader_info struct.  This, however, has
caused a few problems:

 1) There are many things which generate NIR without GLSL.  This means
    we have to support both NIR shaders which come from GLSL and ones
    that don't and need to have an info elsewhere.

 2) The solution to (1) raises all sorts of ownership issues which have
    to be resolved with ralloc_parent checks.

 3) Ever since 00620782c92100d77c660f9783504c6d80fa1d58, we've been
    using nir_gather_info to fill out the final shader_info.  Thanks to
    cloning and the above ownership issues, the nir_shader::info may not
    point back to the gl_shader anymore and so we have to do a copy of
    the shader_info from NIR back to GLSL anyway.

All of these issues go away if we just embed the shader_info in the
nir_shader.  There's a little downside of having to copy it back after
calling nir_gather_info but, as explained above, we have to do that
anyway.

Acked-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

mesa: Make _mesa_primitive_restart_index a static inline in the header.

It's now basically a single expression, so it probably makes sense to
have it inlined into the callers.

Suggested by Marek.

Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

freedreno: fix clang error in fd_get_compute_param

With commit 10c17f23b752 ("freedreno: core compute state support"),
Android builds fail with the following error:

external/mesa3d/src/gallium/drivers/freedreno/freedreno_screen.c:610:17: error: format string is not a string literal (potentially insecure) [-Werror,-Wformat-security]
                        sprintf(ret, ir);
                                     ^~

Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

mesa/vbo: fix invalid min/max indexes

Fixes: c3f37e9b ("st/mesa: use min_index and max_index directly from vbo")
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>

intel: compiler: prevent integer overflow

CID: 1399477, 1399478 (Integer handling issues)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

intel: compiler: remove duplicated code

CID: 1399470: (Control flow issues)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

intel: gen decoder: don't check for size_t negative values

We should get either 0 or 1 here.

CID: 1373562 (Control flow issues)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Matt Turner <mattst88@gmail.com>

bin/*py: honor editorconfig formatting

Replace the two stray tabs with respective space.

Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

bin: use tabs for coding style on *.sh files

v2: Instead of changing *.sh, adapt the editorconfig file (Emil).

Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

android: i965: add per-gen libmesa_i965_gen{4,45,5} static

Needed to fix android building errors:

external/mesa/src/mesa/drivers/dri/i965/brw_state_upload.c:148: error: undefined reference to 'gen5_init_atoms'
external/mesa/src/mesa/drivers/dri/i965/brw_state_upload.c:150: error: undefined reference to 'gen45_init_atoms'
external/mesa/src/mesa/drivers/dri/i965/brw_state_upload.c:152: error: undefined reference to 'gen4_init_atoms'
clang++: error: linker command failed with exit code 1 (use -v to see invocation)

Fixes: 5a19d0b ("i965: Get real per-gen atom lists")
Acked-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

swr: fix polygonmode for front==back

Rasterizer core only supports polygonmode front==back.  Add logic for
populating fillMode for the rasterizer only for that case correctly.
Provide enum conversion between mesa enums and core enums.

The core renders lines/points as tris. Previously, code would enable
stipple for polygonmode != FILL.  Modify stipple enable logic so that
this works correctly.

No regressions in vtk tests.
Fixes the following piglit tests:
pointsprite
gl-1.0-edgeflag-const

v2: remove cc stable, and remove "not implemented" assert
v3: modified commit message

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

swr/rast: support polygonmode point

Add support for polygonmode point in the binner.  This is done by
splitting BinPostSetupPoints from BinPoints, so the earlier call can be
called from BinTriangles.  Setup has already been done at the time
BinPostSetupPoints needs to be called.

This checkin just adds support in the rasterizer.  A separate checkin
will add the appropriate driver support.

v2: remove cc stable
v3: modified commit message and subject line

Reviewed-by: Bruce Cherniak <bruce.cherniak@intel.com>

util: move ALWAYS_INLINE macro to util/macro.h

Also added clang check.

macro.h is include by p_compiler.h so no other change is needed.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

swr: move msaa resolve to generalized StoreTile

v3: list piglit tests fixed by this patch. Fixed typo Tim pointed out.
v2: Reword commit message to more closely adhere to community
guidelines.

This patch moves msaa resolve down into core/StoreTiles where the
surface format conversion routines are available.  The previous
"experimental" resolve was limited to 8-bit unsigned render targets.

This fixes a number of piglit msaa tests by adding resolve support for
all the render target formats we support.

Specifically:
layered-rendering/gl-layer-render: fail->pass
layered-rendering/gl-layer-render-storage: fail->pass
multisample-formats *[2,4,8,16] gl_arb_texture_rg: crash->pass
multisample-formats *[2,4,8,16] gl_ext_texture_snorm: crash->pass
multisample-formats *[2,4,8,16] gl_arb_texture_float: fail->pass
multisample-formats *[2,4,8,16] gl_arb_texture_rg-float: fail->pass

MSAA is still disabled by default, but can be enabled with
"export SWR_MSAA_MAX_COUNT=4" (1,2,4,8,16 are options)
The default is 0, which is disabled.

This patch improves the number of multisample-formats supported by swr,
and fixes several crashes currently in the 17.1 branch.  Therefore, it
should be considered for inclusion in the 17.1 stable release.  Being
disabled by default, it poses no risk to most users of swr.

Reviewed-by: Tim Rowley <timothy.o.rowley@intel.com>
cc: mesa-stable@lists.freedesktop.org

glsl: Don't allow redefining builtin functions on GLSL 1.00.

The spec text cited above says you can't, but only the GLSL 3.00 (redefine
or overload) case was implemented.

Fixes dEQP scoping.invalid.redefine_builtin_fragment/vertex.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>

glsl: Restrict func redeclarations (not just redefinitions) on GLSL 1.00.

Fixes DEQP's scoping.invalid.redeclare_function_fragment/vertex.

v2: Fix accidental rejection of prototype+decl.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com> (v1)
Tested-by: Matt Turner <mattst88@gmail.com>

glsl: Ban #undefining __LINE__ and friends on GLES2.

Fixes deqp_gles2 undefine_invalid_object_* failures.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>

glsl: Restrict functions to not return arrays or SOAs in GLSL 1.00.

From the spec,

    Arrays are allowed as arguments, but not as the return type. [...] The
    return type can also be a structure if the structure does not contain
    an array.

Fixes DEQP shaders.functions.invalid.return_array_in_struct_fragment.

v2: Spec cite wording change

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Matt Turner <mattst88@gmail.com>

nir: fix (hopefully) windows build

Fixes: 53aa109b ("nir: add pass to lower atomic counters to SSBO")
Signed-off-by: Rob Clark <robdclark@gmail.com>

radeonsi: rename si_eliminate_const_vs_outputs -> si_optimize_vs_outputs

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

ac: fix broken elimination of duplicated VS exports

The renumbering code didn't take into account that multiple VS exports
can have the same PARAM index. This also significantly simplifies
the renumbering. Thankfully, we have piglits for this:

    spec@arb_gpu_shader5@arb_gpu_shader5-interpolateatcentroid-packing
    spec@glsl-1.50@execution@interface-blocks-complex-vs-fs

Reported by Michel Dänzer.

Fixes: b08715499e61 ("ac: eliminate duplicated VS exports")
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

egl: Fix -Wint-to-pointer-cast

main/egldisplay.c: In function '_eglParseX11DisplayAttribList':
main/egldisplay.c:491:38: warning: cast to pointer from integer of different size [-Wint-to-pointer-cast]
          display->Options.Platform = (void *)value;

The fix: cast to uinptr_t before void*.
                                      ^
Fixes: ddb99127 egl/x11: Honor the EGL_PLATFORM_X11_SCREEN_EXT attribute
Cc: Adam Jackson <ajax@redhat.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

st/mesa: remove unused st parameter in init_velement_lowered

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/mesa: use PIPE_MAX_ATTRIBS as the max number of vertex buffers

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/mesa: simplify code due to unification to st_common_program

v2: use the st_common_program() helper

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/mesa: simplify update_constants functions

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

st/mesa: unify TCS, TES, GS st_*_program structures

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/mesa: decrease the size of remaining st_translate_program array params

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/mesa: remove unused outputSlotToAttr

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/mesa: remove st_context::vertex_result_to_slot

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/mesa: decrease the size of st_vertex_program

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

st/mesa: remove struct st_tracked_state

It contains only one member: the update function. Let's use the update
function directly.

Tested-by: Edmondo Tommasina <edmondo.tommasina@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: split per-patch from per-vertex indices

Make it a bit clearer that the index spaces are logically seperate by
having them defined in different functions.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: clarify documentation of existing SI workaround

Limiting LS-HS to a single wave is required on all SI chips due to an
issue with a power management feature.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: fix gl_PrimitiveID in tessellation with instanced draws on SI

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: load patch_id for TES-as-ES when exporting for PS

For some reason, this change is only necessary on SI.

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: fix primitive ID in fragment shader when using tessellation

In a VS->TCS->TES->PS pipeline, the primitive ID is read from TES exports,
so it is as if TES were using the primitive ID.

Specifically, this fixes a bug where the primitive ID is not reset at
the start of a new instance.

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: mark fast-cleared textures as compressed when dirtying

There are a bunch of piglit fast clear tests that regressed on SI, for
example ./bin/ext_framebuffer_multisample-fast-clear single-sample.

The problem is that a texture is bound as a framebuffer, cleared, and
then rendered from in a loop that loops through different clear colors.
The texture is never rebound during all this, so the change to
tex->dirty_level_mask during fast clear was not taken into account
when checking for compressed textures.

I have considered simply reverting the problematic commit. However,
I think this solution is better. It does require looping through all
bound textures after a fast clear, but the alternative would require
visiting more textures needless on every draw. Draws are much more
common than clears.

Note that the rendering feedback loop rules do not apply here, because
the framebuffer binding is changed between the glClear and the draw
that samples from the texture that was cleared.

Fixes: bdd644976952 ("radeonsi: don't mark non-dirty textures with CMASK as compressed")
Cc: 17.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

egl: use designated initializers

All the compilers used to build Mesa support them.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Chad Versace <chadversary@chromium.org>

egl: drop unneeded sentinel from level_strings[]

The array is local so we already know its size.

v2: Correct loop condition (Bartosz)

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Chad Versace <chadversary@chromium.org>

egl: remove suprous header eglcompiler.h

The header is used only to provide STATIC_ASSERT. The latter is already
available in utils/macros.h so use that instead and kill of the header.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Chad Versace <chadversary@chromium.org>

egl: remove unneeded else statement in _eglInitLogger

The variable level is already initialized to -1 which is already
interpreted as FALLBACK_LOG_LEVEL.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Chad Versace <chadversary@chromium.org>

egl: remove no longer needed logger infra

As of last commit nobody requires anything else but the
_eglDefaultLogger(). As such use it directly and simplify the
implementation.

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Chad Versace <chadversary@chromium.org>

egl: fold Android logger into main/

Will allow us to greatly simplify a lot of the code in egllog.c

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Chad Versace <chadversary@chromium.org>

egl: remove unused _eglSetLogLevel()

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Chad Versace <chadversary@chromium.org>

glsl: apply the image format for members of structures

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

glsl: store the image format in glsl_struct_field

ARB_bindless_texture allows to declare image types inside
structures, which means we need to keep track of the format.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/glsl_to_tgsi: don't use rzalloc_array() when it's unnecessary

When the arrays are initialized later on with -1, that's useless
to use rzalloc_array().

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

anv: check return value of anv_execbuf_add_bo

CID: 1405919 (Error handling issues)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

anv: avoid null pointer dereference

The application might not give an output structure.

CID: 1405765 (Null pointer dereferences)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

egl: avoid dereferencing a null display

Fixes: ddb99127a6f6c ("egl/x11: Honor the EGL_PLATFORM_X11_SCREEN_EXT attribute")
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

docs/releasing: added relevant people for build/check with MacOSX

Signed-off-by: Andres Gomez <agomez@igalia.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Jeremy Huddleston Sequoia <jeremyhu@apple.com>
Reviewed-by: Jeremy Sequoia <jeremyhu@apple.com>

docs/releasing: added relevant people for build/check with Android

v2: Tapani as main contact and Mauro just for help with
    debugging/building (Mauro).

v3: Mauro my provide feedback for android-x86 only (Mauro).

Signed-off-by: Andres Gomez <agomez@igalia.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Tapani Pälli <tapani.palli@intel.com>
Cc: Mauro Rossi <issor.oruam@gmail.com>
Acked-by: Tapani Pälli <tapani.palli@intel.com>
Acked-by: Emil Velikov <emil.velikov@collabora.com>

docs/releasing: added relevant people for build/check with Windows

v2: Brian Paul as main contact point and Jose Fonseca as
    fallback (Vinson, Jose)

Signed-off-by: Andres Gomez <agomez@igalia.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Cc: Vinson Lee <vlee@freedesktop.org>
Cc: Brian Paul <brianp@vmware.com>
Cc: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

docs/releasing: if possible, do some every day use on the RC

Signed-off-by: Andres Gomez <agomez@igalia.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

docs/releasing: further explain the build/check testing process

The build/check test should be done with an appropriate combination of
flags, depending on the changes introduced by the patch set.

Also, mention to cross compile with mingw-w64 for Windows.

Signed-off-by: Andres Gomez <agomez@igalia.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

docs/releasing: check in master for forgotten nomination candidates

The maintanier should not just rely on the mesa-stable@ mailing list
but actually check the master branch in search for suitable nomination
candidates.

Signed-off-by: Andres Gomez <agomez@igalia.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

docs/releasing: format/style homogenization

Signed-off-by: Andres Gomez <agomez@igalia.com>
Cc: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

bin/get-fixes-pick-list.sh: don't warn if more than one, go over them

If an identified commit was having more than one fix, we would warn
about that and only treat the first.

Now, we don't warn but treat all of them.

Signed-off-by: Andres Gomez <agomez@igalia.com>
Reviewed-by: Eric Engestrom <eric@engestrom.ch>

i965: Update gen6_depth_stencil_state to use genX macro.

While moving depth stencil state to use genxml, this one was left
behind.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Move MOCS macros to brw_state.h.

brw_state.h is a better place to keep them, instead of brw_context.h.

Signed-off-by: Rafael Antognolli <rafael.antognolli@intel.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Acked-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Don't try to unmap NULL program cache BO.

When running shader-db with intel_stub and recent Mesa, context creation
fails when making a logical hardware context.  In this case, we call
intelDestroyContext(), which gets here and tries to unmap the cache BO.

But there isn't one - we haven't made it yet.  So we try to unmap a
NULL pointer, which used to be safe (it did nothing), but crashes
after commit 7c3b8ed87859bfdfb985d21685115a729f9cd138.

The result is that we crash rather than failing context creation with
a nice message.  Either way nothing works, but this is more polite.

Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

Revert "mesa: Require mipmap completeness for glCopyImageSubData(), sometimes."

This reverts commit c5bf7cb52942cb7df9f5d73746ffbf3c102d12cc.

This broke rendering in "Total War: WARHAMMER", which uses a single
level RGBA_UINT32 texture and the default filter modes of GL_LINEAR
and GL_NEAREST_MIPMAP_LINEAR.  However, the texture max level is 0,
so it is actually mipmap complete - it's the integer + linear rule
that causes the error.

I'm working with Khronos to find a real solution.  However it turns
out, this patch is not correct and breaks real programs, so let's
revert it for now.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100690
Bugzilla: https://cvs.khronos.org/bugzilla/show_bug.cgi?id=16224
Cc: "17.1" <mesa-stable@lists.freedesktop.org>

glsl: destroy function and subroutine hash tables

Just like other type hash tables are destroyed in
_mesa_glsl_release_types(), also destroy the ones for function and
subroutine types.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>

radv: fix regression in blit2d push constant change.

These were being fed to the shader as floats via the vertex
path, so also push them as floats here.

This fixes missing overlay in Sascha Willems demos.

Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/meta: cleanup some unused code path

After moving everything to using push constants,
these paths are no longer needed.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/meta: port blit to using push constants

Remove use of vertex buffer.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/meta: move blit2d to using push constants

This allows us to drop the vertex buffer.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/meta: move clear color to using push constants

The color clear value is uniform and needs only to be emitted from
the frag shader, so just push it down via a push constant,
and remove the vertex buffer completely.

The depth clear value needs to be emitted from the vertex
shader, but is only a single value.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/meta: use novertex save path for resolve pass.

This was missing in the original change.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: set base/ranges for push constant loads.

This isn't necessary yet but I'd like to use the range in
some future patches.

[airlied: add new resolve pass]
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: drop resolve hack workarounds

This drops the resolve workarounds that change an image
tiling mode behinds it's back, this is horrible and breaks
the image_view->image relationship. Remove all this.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/meta: select resolve paths

There are 3 resolve paths, the fastest being the hw resolver
but it has restriction on tile modes and can't do subresolves,
the compute resolver is next speed wise, but can't handle DCC
destinations, the fragment resolver handles that case.

This will end up with a slow down as currently we hack the
hw resolver paths when they shouldn't work, but we shouldn't
keep doing that.

The next patch removes the hacks.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/meta: add resolve pass using fragment/vertex shaders

In order to resolve into DCC enabled dests we need to use
the fragment shader. This reuses the code from the compute
path and implements a resolve path in vertex/fragment shader.

This code isn't used until later.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: add subpass resolve compute path

This adds a path to allow compute resolves to be used
for subpass resolves.

This isn't used yet, but will be later.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/resolve: split resolve emission out for compute

This will allow to add a subpass compute resolve path.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/meta: split out core part of resolve shader

I want to reuse the same code for the fragment shader
version of the resolve shaders.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv/meta: add srgb conversion to end of resolve shader.

If we are resolving into an srgb dest, we need to convert
to linear so the store does the conversion back.

This should fix some wierdness seen when we subresolves
hit the compute path.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

nir: Fix missing snprintf symbol on Windows.

Copy nir_print.c's snprintf definition for now, to unbreak Windows
builds.

We can and should cleanup all snprintf definitions in a follow up
change, but I rather not leave Windows build broken any further.

Trivial.

nv50/ir: Replace NV50_PROGRAM_IR_* by PIPE_SHADER_IR_*

Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nv50/ir: Remove unused translation methods

This code was merged commented out, and has stayed that way ever since.

Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nv50/ir: Free target if we failed to create a program

Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nv50/ir: Fail if encountering unknown shader type

Signed-off-by: Pierre Moreau <pierre.morrow@free.fr>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

radv: set PERF_MOD in sample state like radeonsi.

This just aligns the code with radeonsi.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: apply the tess+GS hang workaround to Polaris12 as well

As I pointed out for radeonsi, and AMD confirmed, so fix this
in radv as well.

Cc: "17.1" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>

mesa: small texture targetIndex tidy up

Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: fix broken indentation

Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: some C99 tidy ups

Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: add KHR_no_error support to copy buffer subdata functions

Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: remove _mesa from static function

Reviewed-by: Eric Anholt <eric@anholt.net>

st/mesa: stop calling _mesa_init_buffer_object_functions()

After calling this we were then overriding all the functions with
st versions.

Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: make _mesa_buffer_storage() static

Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: make _mesa_copy_buffer_sub_data() static

Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: make _mesa_clear_buffer_sub_data() static

Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: add KHR_no_error support for flush mapped buffer functions

Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: make _mesa_flush_mapped_buffer_range() static

Reviewed-by: Eric Anholt <eric@anholt.net>

mesa: add KHR_no_error support for unmap buffer functions

Reviewed-by: Eric Anholt <eric@anholt.net>