Revert "gitlab-ci: disable a630 tests as mesa-cheza is down (again)"

This reverts commit 18657c0c0a9074d3dfc0763b396929bcf34f71b4

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3804>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3804>

freedreno/a6xx: fix Z24_UNORM_S8_UINT_AS_R8G8B8A8

CI didn't run so missed this.

Note previously had :
   texfmt = TFMT6_Z24_UNORM_S8_UINT
   rbfmt = RB6_Z24_UNORM_S8_UINT_AS_R8G8B8A8

which are both now FMT6_Z24_UNORM_S8_UINT_AS_R8G8B8A8

Fixes: 18786cc7d55 ("freedreno/a6xx: use single format enum")
Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3804>

iris: add support INTEL_blackhole_render

v2: Use a software mechanism to manage blackhole state

v3: s/iris_batchbuffer/iris_batch/ (Ken)

v4: Fixup state transition mistake (Ken/Lionel)

v5: Cleanup iris_batch_flush (Ken)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2964>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2964>

st: add support for INTEL_blackhole_render

Adding a new CSO proved to be fairly difficult especially because this
extension affect draw/dispatch/blit alike.

Instead this change passes the state of the noop into the entry points
emitting the operations affected.

v2: Fix assert in default pipe caps

v3: Drop whitespace changes (Ken)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2964>

i965: enable INTEL_blackhole_render

v2: condition the extension on context isolation support from the
    kernel (Chris)

v3: (Lionel)

    The initial version of this change used a feature of the Gen7+
    command parser to turn the primitive instructions into no-ops.
    Unfortunately this doesn't play well with how we're using the
    hardware outside of the user submitted commands. For example
    resolves are implicit operations which should not be turned into
    no-ops as part of the previously submitted commands (before
    blackhole_render is enabled) might not be disabled. For example
    this sequence :

       glClear();
       glEnable(GL_BLACKHOLE_RENDER_INTEL);
       glDrawArrays(...);
       glReadPixels(...);
       glDisable(GL_BLACKHOLE_RENDER_INTEL);

    While clear has been emitted outside the blackhole render, it
    should still be resolved properly in the read pixels. Hence we
    need to be more selective and only disable user submitted
    commands.

    This v3 manually turns primitives into MI_NOOP if blackhole render
    is enabled. This lets us enable this feature on any platform.

v4: Limit support to gen7.5+ (Lionel)

v5: Enable Gen7.5 support again, requires a kernel update of the
    command parser (Lionel)

v6: Disable Gen7.5 again... Kernel devs want these patches landed
    before they accept the kernel patches to whitelist INSTPM (Lionel)

v7: Simplify change by never holding noop (there was a shortcoming in the test not considering fast clears)
    Only program register using MI_LRI (Lionel)

v8: Switch to software managed blackhole (BDW hangs on compute batches...)

v9: Simplify the noop state tracking (Lionel)

v10: Don't modify flush function (Ken)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org> (v8)
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2964>

mesa: add INTEL_blackhole_render

v2: Implement missing Enable/Disable (Emil)

v3: Drop unused NewIntelBlackholeRender (Ken)

v4: Bring back NewIntelBlackholeRender as i965 implementation uses it
    again (Lionel)

v5: Drop atom (Ken)

Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2964>

Revert "st/va: Convert interlaced NV12 to progressive"

This reverts commit 2add63060b51ea2ae432d10e1bd52d6cc0a4dcbb.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2454
Fixes: 2add63060b51 "st/va: Convert interlaced NV12 to progressive"
Signed-off-by: Thong Thai <thong.thai@amd.com>
Acked-by: Leo Liu <leo.liu@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3815>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3815>

anv: Reject modifiers on depth/stencil formats

6790397346cc added code which attempts to reject modifiers on
depth/stencil formats but it was placed after the early return for depth
and stencil aspects.  This commit moves it up so it actually works.

Of course, this doesn't actually matter because the only user of any of
the modifiers stuff is the WSI code and it will never do anything with
depth/stencil.

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3794>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3794>

gallium/swr: fix rdtsc debug statistics mechanism

Reviewed-by: Jan Zielinski <jan.zielinski@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3812>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3812>

gitlab-ci: remove load_store_vectorizer from expected s390x test failures

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3690>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3690>

nir: fix nir_const_value_as_uint bit size in load/store vectorizer tests

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3690>

Revert "nir: Add a couple trivial abs optimizations"

These were already added in 9fdaeb7776c ("nir: add min/max optimisation"),
and there's no point in doing them twice.

This reverts commit e4d346c86db0ae332fcdf55eac0e075cfb99a7eb.

Fixes: e4d346c86db ("nir: Add a couple trivial abs optimizations")
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3786>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3786>

iris: fix aux buf map failure in 32bits app on Android

Cc: mesa-stable@lists.freedesktop.org
Reported-by: Zhifang Long <zhifang.long@intel.com>
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3784>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3784>

radv: remove unused RADV_HASH_SHADER_IS_GEOM_COPY_SHADER

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3789>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3789>

radv: remove RADV_DEBUG=nosisched and RADV_PERFTEST=sisched

They are no longer useful.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3789>

radv: remove LLVM sicheduler enable for The Talos Principle

sisched is completely unmaintained, it used to give few more FPS
in the past but with ACO, it's now obsolete. It seems even faster
without sisched now.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3789>

glsl: fix a memory leak with resource_set

   ==7265== 248 (120 direct, 128 indirect) bytes in 1 blocks are definitely lost in loss record 1,438 of 1,465
   ==7265==    at 0x483980B: malloc (vg_replace_malloc.c:309)
   ==7265==    by 0x598A2AB: ralloc_size (ralloc.c:119)
   ==7265==    by 0x598F861: _mesa_set_create (set.c:127)
   ==7265==    by 0x599079D: _mesa_pointer_set_create (set.c:570)
   ==7265==    by 0x58BD7D1: build_program_resource_list(gl_context*, gl_shader_program*, bool) (linker.cpp:4026)
   ==7265==    by 0x548231B: st_link_shader (st_glsl_to_ir.cpp:170)
   ==7265==    by 0x54DA269: _mesa_glsl_link_shader (ir_to_mesa.cpp:3119)

Fixes: a6aedc66 ("st/glsl_to_nir: use nir based program resource list builder")
Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Timothy Arceri <tarceri@itsqueeze.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3574>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3574>

radv: implement VK_EXT_line_rasterization

Only Bresenham lines are supported. GFX9 is currently disabled
because there is some CTS failures for some weird reasons.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2982>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2982>

radv: fix line width range and granularity

The hardware supports wide lines and the granularity is way larger.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/2982>

tu: Force sysmem with mipmapped non-aligned linear stores

Fixes hangs with
dEQP-VK.api.image_clearing.core.clear_color_image.1d.linear.single_layer.r8g8b8a8_unorm
and many others on a640, and presumably silent corruption with a630.

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3713>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3713>

tu: Support input attachments with sysmem

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3713>

tu: Support resolve ops with sysmem rendering

Similar to vkCmdClearAttachments(), we use CP_COND_REG_EXEC to
conditionally execute both the gmem and sysmem paths, except for after
the last subpass where it's known whether we're using sysmem rendering
or not.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3713>

tu: Handle vkCmdClearAttachments() with sysmem

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3713>

tu: Add helper for CP_COND_REG_EXEC

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3713>

tu: Sysmem rendering

This has only lightly been tested. It passes dEQP-VK.api.smoke.triangle,
so at least we're able to show a triangle. For now, it's just enabled
under a debug flag. In the future we'll probably want some heuristics
like what freedreno has and another debug flag to disable it except when
it's forced.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3713>

tu: Disable linear depth attachments

Also, disable importing depth/stencil textures.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3713>

tu: Support multisample image clears

We may need shader workarounds for some formats, but for now this seems
to work at least as well as the gmem path for clearing multisample
attachments. And soon we'll start calling this even on the gmem path,
since we leave the final decision of whether to use sysmem or not up
till the end, so we can't have it assert or otherwise working tests
would assert.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3713>

tu/blit: Support blits in secondary cmdstreams

For sysmem rendering we'll have to emit a delayed clear IB to implement
LOAD_OP_*, similar to the existing tile_load_ib.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3713>

tu: Properly set UBWC flags in RB_RENDER_CNTL

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3713>

tu: Don't emit initial render target state in tile_load_ib

Emitting it directly in CmdBeginRenderPass should be around the same,
except that now we can easily share it with the sysmem path.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3713>

radeonsi: make si_fence_server_signal flush pipe without work

glSignalSemaphoreEXT sometime doesn't signal the semaphore, it is
because radeonsi doesn't flush if gl context doesn't have pending
work. Fix the porblem by always submit ib.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Cc: 19.3 20.0 <mesa-stable@lists.freedesktop.org>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3779>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3779>

turnip: Add a618 support

I merely ported a freedreno patch to turnip which
updates some magic regsiter values.

    commit ff6e148a3d60e6e7f3b33f134228b1ed4216903e
    Author:     Rob Clark <robdclark@chromium.org>
    CommitDate: Tue Oct 29 09:19:34 2019 -0700
    Subject:    freedreno/a6xx: add a618 support

That's all that Rob did for gallium for a618, so I assume that's we need
for turnip also.

Tested manually with:

    dEQP-VK.api.image_clearing.core.clear_color_image.2d.linear.single_layer.*
        pass 300/555
        fail   0/555
        skip 255/555

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3743>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3743>

turnip: Add magic register values to tu_physical_device

The value of some magic regsiters differ across chipsets. fd6_context
manages the differences by initializing them at runtime. Let's do the
same.

Add to tu_physical_device a subset of those found in fd6_context:

    RB_UNKNOWN_8E04_blit
    RB_CCU_CNTL_gmem
    PC_UNKNOWN_9805
    SP_UNKNOWN_A0F8

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3743>

freedreno/a6xx: use single format enum

Loses some information about which formats can be used in which cases, but
we encode that information in the format table anyway.

Important notes:
* RB6_R10G10B10A2_UNORM becomes FMT6_R10G10B10A2_UNORM_DEST
* TFMT6_8_8_8_UNORM becomes FMT6_8_8_8_X8_UNORM (not FMT6_8_8_8_UNORM)

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kristian H. Kristensen <hoegsberg@google.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3798>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3798>

anv: Respect ISL_SURF_USAGE_DISABLE_AUX_BIT in make_surface()

If set, then don't make the aux surface.

Only anv_android.c used the flag, but anv_image.c fully ignored it.

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3797>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3797>

anv: Clarify behavior of anv_image_aspect_to_plane()

It returns the aspect's _format_ plane, not its _memory_ plane (using the
vocabulary of VK_EXT_image_drm_format_modifier).

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3796>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3796>

anv: Delete anv_image::ccs_e_compatible

It was set exactly once, and read exactly once, both times during
anv_image_create().

I found its permanency as a member of anv_image to be distracting while
implementing VK_EXT_image_drm_format_modifier.

Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3795>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3795>

aco: improve SCC handling in some SALU combines

Add some checks and remove some unnecessary checks.

Found by observation. No pipeline-db changes.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3599>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3599>

aco: disable some instruction combining if it could change an exec operand

Found by observation. No pipeline-db changes.

Signed-off-by: Rhys Perry <pendingchaos02@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3599>

Rename nir_lower_constant_initializers to nir_lower_variable_initalizers

This is naming is more clear as nir_variables can be initializes not
just with a nir_constant but with a pointer to another nir_variable.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3047>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3047>

compiler/spirv: Add support for non-constant initializers

This adds support for OpVariable having an initializer that points to
another variable, rather than a constant. In this case, the variable is
initialized to a pointer to the other variable.

Fixes Vulkan CTS tests:
dEQP-VK.spirv_assembly.instruction.compute.variable_init.private.*

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3047>

compiler/nir: Add support for variable initialization from a pointer

Add a pointer_initializer field to nir_variable analogous to
constant_initializer, which can be used to initialize the nir_variable
to a pointer to another nir_variable. Just like the
constant_initializer, the pointer_initializer gets eliminated in the
nir_lower_constant_initializers pass.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3047>

radeon/vce: Move global function pointer si_get_pic_param to local encoder structure
Multi gpu use case broken when the function was global

Reviewed-by: Leo Liu <leo.liu@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3731>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3731>

anv: Rename param make_surface::dev to device

Everywhere in anvil, each variable of type anv_device is named 'device',
except this single instance. Rename it for consistency.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3773>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3773>

anv: Drop unused anv_image_get_surface_for_aspect_mask()

Replaced by anv_image.c:get_surface() in:

  commit a62a97933578a813beb0d27cc8e404850f7fd302
  Author:     Lionel Landwerlin <lionel.g.landwerlin@intel.com>
  CommitDate: Fri Oct 6 16:32:20 2017 +0100
  Subject:    anv: enable multiple planes per image/imageView

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3773>

gitlab-ci: Only use gstreamer runners for the s390x job for now

The fdo-packet-* runners keep hitting the (already quite long) timeouts
for some of the tests, taking many times as long for them as the
gstreamer runners.

The fdo-gitlab-gce-runner3 runner would work as well, but it doesn't
have any tags we could use.

Acked-by: Daniel Stone <daniels@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3760>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3760>

nir: do not use De Morgan's Law rules for flt and fge

In presence of NaNs, "!(flt(a, b) && flt(c, d))" is NOT EQUAL
to "fge(a, b) || fge(c, d)". These optimizations are unsafe for
apps that rely on NaN behaviour.

pipeline-db (GFX9/LLVM):
Totals from affected shaders:
SGPRS: 3176 -> 3136 (-1.26 %)
VGPRS: 2188 -> 2144 (-2.01 %)
Spilled SGPRs: 227 -> 169 (-25.55 %)
Code Size: 150572 -> 151800 (0.82 %) bytes
Max Waves: 307 -> 310 (0.98 %)

pipeline-db (GFX9/ACO):
Totals from affected shaders:
SGPRS: 18744 -> 18744 (0.00 %)
VGPRS: 15576 -> 15580 (0.03 %)
Spilled SGPRs: 164 -> 164 (0.00 %)
Code Size: 1573012 -> 1576492 (0.22 %) bytes
Max Waves: 1534 -> 1532 (-0.13 %)

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2127
Fixes: d1ed4ffe0b7 ("nir: Use De Morgan's Law on logic compounded comparisons")
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3696>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3696>

aco: fix creating v_madak if v_mad_f32 has two sgpr literals

Do not ignore that src1 can be a sgpr.

Closes: https://gitlab.freedesktop.org/mesa/mesa/issues/2435
Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3759>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3759>

radv: set the chip name to GCN-NOOP when RADV_FORCE_FAMILY is set

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3654>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3654>

radv: make sure to not submit any IBs when RADV_FORCE_FAMILY is set

To prevent GPU hangs.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3654>

radv: Do not redundantly set the RB+ regs on pipeline switch.

No significant perf changes seen on Bayonetta. (Changes are in the
noise on my Raven Laptop)

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3735>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3735>

panfrost: Remove unused anonymous enum variables.

This patch fix these build errors with GCC 10.

/usr/bin/ld: src/gallium/drivers/panfrost/libpanfrost.a(pan_resource.c.o):src/panfrost/midgard/midgard_compile.h:52: multiple definition of `pan_sysval'; src/gallium/drivers/panfrost/libpanfrost.a(pan_screen.c.o):src/panfrost/midgard/midgard_compile.h:52: first defined here
/usr/bin/ld: src/gallium/drivers/panfrost/libpanfrost.a(pan_resource.c.o):src/panfrost/midgard/midgard_compile.h:68: multiple definition of `pan_special_attributes'; src/gallium/drivers/panfrost/libpanfrost.a(pan_screen.c.o):src/panfrost/midgard/midgard_compile.h:68: first defined here

Fixes: 7e8de5a707f7 ("panfrost: Implement system values")
Fixes: 306800d747bc ("pan/midgard: Lower gl_VertexID/gl_InstanceID to attributes")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3752>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3752>

radv: Optimize emitting index buffer changes.

Since the direct indexed draw packet has the address/count info
inline, there is no sense in emitting the base and size.

No real significant changes found during benchmarks.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3466>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3466>

nir: Mark fmin and fmax as commutative and associative

Per the resolution of Khronos GLSL issue 80
(https://github.com/KhronosGroup/GLSL/issues/80).  Spec updates have not
landed yet, but I'll get to it soon. :)

The extra hurt shaders on Gen8+ are a handful of shaders that see things like

    bcsel(fmin(b - a, a - c) >= 0, x, y)

converted to

   bcsel(a >= b && c >= a, x, y)

The former can be generated as a CSEL instruction.  If either b - a or a
- c is used elsewhere in the shader, this saves an instruction.

All Haswell+ platforms had similar results. (Ice Lake shown)
total instructions in shared programs: 14550188 -> 14550048 (<.01%)
instructions in affected programs: 12168 -> 12028 (-1.15%)
helped: 30
HURT: 3
helped stats (abs) min: 1 max: 17 x̄: 4.77 x̃: 2
helped stats (rel) min: 0.05% max: 3.85% x̄: 1.77% x̃: 1.80%
HURT stats (abs)   min: 1 max: 1 x̄: 1.00 x̃: 1
HURT stats (rel)   min: 0.50% max: 0.50% x̄: 0.50% x̃: 0.50%
95% mean confidence interval for instructions value: -6.15 -2.33
95% mean confidence interval for instructions %-change: -2.00% -1.12%
Instructions are helped.

total cycles in shared programs: 203770286 -> 203771464 (<.01%)
cycles in affected programs: 688466 -> 689644 (0.17%)
helped: 172
HURT: 220
helped stats (abs) min: 1 max: 286 x̄: 12.15 x̃: 6
helped stats (rel) min: 0.03% max: 5.97% x̄: 0.70% x̃: 0.35%
HURT stats (abs)   min: 1 max: 578 x̄: 14.85 x̃: 6
HURT stats (rel)   min: 0.03% max: 32.36% x̄: 1.21% x̃: 0.52%
95% mean confidence interval for cycles value: -0.74 6.75
95% mean confidence interval for cycles %-change: 0.15% 0.59%
Inconclusive result (value mean confidence interval includes 0).

total fills in shared programs: 4525 -> 4523 (-0.04%)
fills in affected programs: 48 -> 46 (-4.17%)
helped: 1
HURT: 0

Ivy Bridge
total instructions in shared programs: 11858995 -> 11858898 (<.01%)
instructions in affected programs: 10822 -> 10725 (-0.90%)
helped: 25
HURT: 13
helped stats (abs) min: 1 max: 17 x̄: 5.32 x̃: 2
helped stats (rel) min: 0.40% max: 5.00% x̄: 2.16% x̃: 1.85%
HURT stats (abs)   min: 1 max: 15 x̄: 2.77 x̃: 2
HURT stats (rel)   min: 0.47% max: 2.90% x̄: 1.83% x̃: 2.15%
95% mean confidence interval for instructions value: -4.66 -0.45
95% mean confidence interval for instructions %-change: -1.54% -0.05%
Instructions are helped.

total cycles in shared programs: 177947023 -> 177946880 (<.01%)
cycles in affected programs: 822075 -> 821932 (-0.02%)
helped: 157
HURT: 175
helped stats (abs) min: 1 max: 164 x̄: 13.17 x̃: 4
helped stats (rel) min: 0.03% max: 6.72% x̄: 0.64% x̃: 0.17%
HURT stats (abs)   min: 1 max: 308 x̄: 11.00 x̃: 4
HURT stats (rel)   min: 0.03% max: 9.76% x̄: 0.70% x̃: 0.18%
95% mean confidence interval for cycles value: -3.86 3.00
95% mean confidence interval for cycles %-change: -0.09% 0.22%
Inconclusive result (value mean confidence interval includes 0).

total spills in shared programs: 4185 -> 4188 (0.07%)
spills in affected programs: 146 -> 149 (2.05%)
helped: 0
HURT: 1

total fills in shared programs: 5248 -> 5249 (0.02%)
fills in affected programs: 347 -> 348 (0.29%)
helped: 0
HURT: 1

Sandy Bridge
total instructions in shared programs: 10680224 -> 10680144 (<.01%)
instructions in affected programs: 4702 -> 4622 (-1.70%)
helped: 15
HURT: 3
helped stats (abs) min: 1 max: 17 x̄: 5.53 x̃: 5
helped stats (rel) min: 0.39% max: 4.76% x̄: 2.17% x̃: 1.67%
HURT stats (abs)   min: 1 max: 1 x̄: 1.00 x̃: 1
HURT stats (rel)   min: 0.52% max: 0.52% x̄: 0.52% x̃: 0.52%
95% mean confidence interval for instructions value: -7.24 -1.65
95% mean confidence interval for instructions %-change: -2.55% -0.89%
Instructions are helped.

total cycles in shared programs: 152988780 -> 152985691 (<.01%)
cycles in affected programs: 1072850 -> 1069761 (-0.29%)
helped: 168
HURT: 145
helped stats (abs) min: 1 max: 592 x̄: 33.90 x̃: 12
helped stats (rel) min: 0.02% max: 10.73% x̄: 0.90% x̃: 0.31%
HURT stats (abs)   min: 1 max: 259 x̄: 17.98 x̃: 6
HURT stats (rel)   min: 0.02% max: 8.17% x̄: 0.77% x̃: 0.19%
95% mean confidence interval for cycles value: -17.95 -1.79
95% mean confidence interval for cycles %-change: -0.34% 0.08%
Inconclusive result (%-change mean confidence interval includes 0).

Iron Lake and GM45 had similar results. (Iron Lake shown)
total instructions in shared programs: 8107033 -> 8107025 (<.01%)
instructions in affected programs: 696 -> 688 (-1.15%)
helped: 5
HURT: 0
helped stats (abs) min: 1 max: 2 x̄: 1.60 x̃: 2
helped stats (rel) min: 0.34% max: 7.14% x̄: 3.47% x̃: 4.65%
95% mean confidence interval for instructions value: -2.28 -0.92
95% mean confidence interval for instructions %-change: -7.22% 0.28%
Inconclusive result (%-change mean confidence interval includes 0).

total cycles in shared programs: 188348526 -> 188348404 (<.01%)
cycles in affected programs: 33618 -> 33496 (-0.36%)
helped: 23
HURT: 0
helped stats (abs) min: 2 max: 12 x̄: 5.30 x̃: 6
helped stats (rel) min: 0.05% max: 1.83% x̄: 0.47% x̃: 0.51%
95% mean confidence interval for cycles value: -6.70 -3.91
95% mean confidence interval for cycles %-change: -0.64% -0.30%
Cycles are helped.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/1359>

Revert "gallium: Fix big-endian addressing of non-bitmask array formats."

This reverts the functional part of commit
d17ff2f7f1864c81c1e00d04baf20f953c6d276a, leaving the unit test for
mesa/pipe agreement on what's an array.

The issue is that the util_channel_desc.shift values on array formats are
not used for bit addressing in memory, they're bit addressing within a
word treating a pixel of the format as a native type, as seen by
llvmpipe's use of the values to do shifts (see
lp_build_unpack_arith_rgba_aos() for example).  This means the values are
nonsensical for 3-byte RGB, but then llvmpipe doesn't expose those formats
so it works out.

I still want to clean up our big-endian format handling at some point, but
let's fix the s390x regression first, sort out our format unit tests in
CI, then be able to refactor with confidence.

Fixes: d17ff2f7f186 ("gallium: Fix big-endian addressing of non-bitmask array formats.")
Closes: #2472
Acked-by: Marek Olšák <marek.olsak@amd.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3721>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3721>

st/mesa: optimize st_update_array with ALWAYSINLINE

The time spent in st_update_array is reduced by 5-10%.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

mesa: don't use bitfields in _mesa_prim

This is better.

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

mesa: remove unused _mesa_prim::is_indirect

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

í965: don't use _mesa_prim::is_indirect

the vbo change only affects i965

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: merge use_buffer_objects into vbo_CreateContext to skip the big malloc

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: clean up resetting vertex attribs

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: also map the immediate mode buffer for read

because we read from it sometimes and we want cached reads.

We can only do it with the persistent mapping, because the non-persistent
mapping uses incompatible flags.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: delay flagging FLUSH_STORED_VERTICES until glEnd

Only state changes see this, which can't occur before glEnd.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: add/update unlikely statements in ATTR_UNION

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: increase the size of the immediate mode buffer to decrease draw count

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: use FlushVertices flags properly and clear NeedFlush correctly

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: fix resizing 64-bit vertex attributes

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: optimize resizing vertex attributes during immediate mode

Just move data manually instead of copying all attributes back and forth.

This increases performance by 5% for Viewperf11/Catia - first scene.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: don't store glVertex values temporarily into exec

This improves performance by 4.3% in Viewperf11/Catia, first scene.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: pass only either uint32_t or uint64_t into ATTR_UNION

This makes the next commit possible.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: don't set FLUSH_UPDATE_CURRENT for glVertex

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: keep the immediate mode buffer always mapped for simplicity

It only unmaps when it draws with a non-persistent buffer.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: don't check ctx->NewState twice in glBegin

_mesa_valid_to_render does it too.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: remove a funky recursive call in glBegin

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: interleave attrsz, attrtype, and active_sz in memory

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: remove immediate mode code that doesn't do anything and simplify stuff

no change in behavior

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: don't unmap persistent buffer mappings for glBegin/End

This significantly improves performance by lowering CPU overhead.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: skip FlushMappedBufferRange for glBegin/End by using a persistent mapping

This is a preparation for the next commit and just isolates the removal
of GL_MAP_FLUSH_EXPLICIT_BIT and other map flags that don't make sense with
UNSYNCHRONIZED.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

vbo: create the immediate mode buffer only in vbo_exec_vtx_map

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

mesa: import PIPE_CAP_SIGNED_VERTEX_BUFFER_OFFSET handling

This should decrease overhead in st_update_array.

Reviewed-by: Pierre-Eric Pelloux-Prayer <pierre-eric.pelloux-prayer@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

mesa: remove FLUSH_CURRENT calls that have no effect

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

mesa: fix incorrect uses of FLUSH_CURRENT

FLUSH_CURRENT is used to copy attributes from the vbo module to
Current.Attrib. It flushes vertices too, but that's a side effect,
not the intent.

Reviewed-by: Mathias Fröhlich <mathias.froehlich@web.de>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3766>

glx: print FPS with 2 decimal places

useful if FPS is low.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3590>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3590>

radeonsi: don't update states for the DCC MSAA bug on GFX6-7

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3646>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3646>

radeonsi: fix the DCC MSAA bug workaround

Cc: 19.3 20.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3646>

r600/sfn: Add some documentation

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Tested-by: Marge Bot <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add .editorconfig file

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add support for SSBO load and store

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add support for atomic instructions

v2: fix compilation with gcc-6

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600: Make sure LLVM is not used for DRAW

For some reasone that is not yet clear the piglit
gl-1.0-rendermode-feedback makes use of the LLVM pipe draw module and
fails there with an assertion. Explicietly disabling LLVM fixes this.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add lowering UBO access to r600 specific codes

r600 reads vec4 from the UBO, but the offsets in nir are evaluated to the component.
If the offsets are not literal then all non-vec4 reads must resolve the component
after reading a vec4 component (TODO: figure out whether there is a consistent way
to deduct the component that is actually read).

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add GDS instructions

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add compute shader skeleton

This adds some very basic compute shader support.

v2: fix compilation with gcc-6

v3: rebase: correct barrier intrinstic

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add VS for TCS shader skeleton

This adds the VS shader type that handles the output to tesselation shaders

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add support for geometry shader

v2: fix compilation with gcc-6

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: add emitVertex instructions

More preparation for GS support

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add MemRingOut instructions

Preparing support for Geometry shaders.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add a load GDS result instruction

This is required to read results for atomic SSBO  instructions

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: Add lowering arrays to scratch and according instructions

Make use of the scratch space for arrays that are larger then 100 elements.
Since for IO r600 is vector based, there is a bit of a scratch space waste
here for arrays that use types smaller then vec4.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>

r600/sfn: add register remapping

Make use of the live range evaluation to merge registers. Since the
live ranges are evaluated for register indices, the algorithm is not
optimal, but for most piglits up to glsl-3.3 it does the job.

Signed-off-by: Gert Wollny <gert.wollny@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/merge_requests/3225>