intel/isl: Add an assert to check zero width/height surface

Signed-off-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

st/omx/dec/h265: add scaling list data

Specified by subclause 7.3.4

v2: get the loop optimized

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>

st/omx/dec/h265: fix the skip for before and after list

For reference picture sets, there are cases that rps will not always
be used. Once detect the unused flag from encoded bitstream, we should
not add this rps to any list, otherwise pass the incorrect reference
and skip the correct rps.

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

st/omx/dec/h265: set the default reference picture set for reference

It will fix the corruption for frame, that only has one stort term ref
picture set, we set NULL rps for this case previously, causing taking
incorrect reference. Instead we should take that only short term set
as reference

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

st/omx/dec/h265: decoder size should follow from sps

The video size from format container is not always compatible with
the size from codec bitstream, the HW decoder should take the size
information from bitstream, otherwise the corruption appears with clip
that has different size info between bitstream and format container

So we are passing width(height)_in_samples from sequence parameter
set to video decoder.

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

st/omx/dec/h265: increase dpb max size to 32

For clip with frame delta poc over 16

Signed-off-by: Leo Liu <leo.liu@amd.com>

nir/spirv: Remove a duplicate spirv2nir from .gitignore

This reverts commit fc03ecfeaf5a10a8b84d366f24f02e74ab03b145.

Chad had already pushed the same change between me posting the patch and Jason
pushing it: 44bcf1ffcced04fd7f2b (".gitignore: Ignore src/compiler/spirv2nir")

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

radeonsi: optionally run the LLVM IR verifier pass

This is enabled automatically if shader printing is enabled, or separately
by R600_DEBUG=checkir. Catch mal-formed IR before it crashes in a later
pass.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon: fix argument type of llvm.{cttz,ctlz}.i32 intrinsics

Caught by R600_DEBUG=checkir (next commit).

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon: unify the creation of basic blocks

This changes the order of basic blocks to be equal to the order of code in the
original TGSI, which is nice for making sense of shader dumps.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon: merge branch and loop flow control stacks

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon: simplify if/else/endif blocks

In particular, we no longer emit an else block when there is no ELSE
instruction.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon: label basic blocks by the corresponding TGSI pc

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon: cleanup and fix branch emits

Some of the existing code is needlessly complicated. The basic principle
should be: control-flow opcodes emit branches to properly terminate the
current block, _unless_ the current block already has a terminator (which
happens if and only if there was a BRK or CONT).

This also fixes a bug where multiple terminators were created in a block.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97887
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

winsys/radeon: add buffer_get_reloc_offset

Really fix the bug that was supposed to be fixed by commits 3e7cced4b and
a48bf02d: even when virtual addresses are used, the legacy relocation-based
method with offsets relative to the kernel's buffer object are used for
video submissions.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97969
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: don't declare LDS in PS when ds_bpermute is used

I guess this is not needed because dead code elimination removes
the declaration.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: use DDX/DDY directly in si_llvm_emit_ddxy_interp

We can finally do this, because the opcodes are scalar now.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: simplify si_llvm_emit_ddxy

si_llvm_emit_ddxy is called once per element, so we don't have to generate
code for 4 elements at once.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: don't call build_gep0 in si_llvm_emit_ddxy on VI

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: use a helper function for BuildGEP(0, x)

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: remove obsolete shader definitions

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: remove unnecessary #includes

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: clean up lucky #include dependencies

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: don't re-create shader PM4 states after scratch buffer update

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

gallium/radeon: move r600_common_context::texture_buffers to r600g

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: don't set sampler buffer offsets in create_sampler_view

do it at bind time, so that pipe_sampler_view is immutable with regard to
buffer reallocations and we don't have to remember all existing buffer
views.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: optimize si_invalidate_buffer based on bind_history

Just enclose each section with: if (rbuffer->bind_history & PIPE_BIND_...)

Bioshock Infinite: +1% performance

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: track buffer bind history

similar to gl_buffer_object::UsageHistory

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: drop support for NULL sampler views

not used anymore. It was used when the polygon stipple texture was constant.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: separate IA_MULTI_VGT_PARAM and VGT_PRIMITIVE_TYPE emission

We want to emit IA_MULTI_VGT_PARAM less often because it's a context reg.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: move VGT_LS_HS_CONFIG to derived tess_state

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: don't check PIPE_BARRIER_MAPPED_BUFFER

Caches are always flushed at IB boundary.

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: parse SURFACE_SYNC correctly on CIK-VI

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

gallium/radeon: inline r600_context_add_resource_size

Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>

radeonsi: Fix primitive restart when index changes

If primitive restart is enabled for two consecutive draws which use
different primitive restart indices, then the first draw's primitive
restart index was incorrectly used for the second draw.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=98025

Cc: 11.1 11.2 12.0 <mesa-stable@lists.freedesktop.org>
Signed-off-by: Marek Olšák <marek.olsak@amd.com>

spirv: replace assert() with unreachable()

This fixes an uninitialized warning for is_vertex_input.

Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

intel: use the correct format specifier for printing uint64_t

Fixes a bunch of warnings in 32-bit builds.

Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>

gallium/winsys: replace calls to dup(2) with fcntl(F_DUPFD_CLOEXEC)

Without this fix, duplicated file descriptors leak into child processes.
See commit aaac913e901229d11a1894f6aaf646de6b1a542c for one instance
where the same fix was employed.

Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Matt Whitlock <freedesktop@mattwhitlock.name>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/xa: replace call to dup(2) with fcntl(F_DUPFD_CLOEXEC)

Without this fix, duplicated file descriptors leak into child processes.
See commit aaac913e901229d11a1894f6aaf646de6b1a542c for one instance
where the same fix was employed.

Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Matt Whitlock <freedesktop@mattwhitlock.name>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

st/dri: replace calls to dup(2) with fcntl(F_DUPFD_CLOEXEC)

Without this fix, duplicated file descriptors leak into child processes.
See commit aaac913e901229d11a1894f6aaf646de6b1a542c for one instance
where the same fix was employed.

Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Matt Whitlock <freedesktop@mattwhitlock.name>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

gallium/auxiliary: replace call to dup(2) with fcntl(F_DUPFD_CLOEXEC)

Without this fix, duplicated file descriptors leak into child processes.
See commit aaac913e901229d11a1894f6aaf646de6b1a542c for one instance
where the same fix was employed.

Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Matt Whitlock <freedesktop@mattwhitlock.name>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

egl/android: replace call to dup(2) with fcntl(F_DUPFD_CLOEXEC)

Without this fix, duplicated file descriptors leak into child processes.
See commit aaac913e901229d11a1894f6aaf646de6b1a542c for one instance
where the same fix was employed.

Cc: <mesa-stable@lists.freedesktop.org>
Signed-off-by: Matt Whitlock <freedesktop@mattwhitlock.name>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

intel: fix compilation warning on gen_get_device_info

(warning: 'const' type qualifier on return type has no effect)

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>

i965: Only emit 1 viewport when possible.

In core profile, we support up to 16 viewports.  However, in the
majority of cases, only 1 of them is actually used - we only need
the others if the last shader stage prior to the rasterizer writes
gl_ViewportIndex.

Processing all 16 viewports adds additional CPU overhead, which hurts
CPU-intensive workloads such as Glamor.  This meant that switching to
core profile actually penalized Glamor to an extent, which is
unfortunate.

This patch tracks the number of relevant viewports, switching between
1 and ctx->Const.MaxViewports if gl_ViewportIndex is written.  A new
BRW_NEW_VIEWPORT_COUNT flag tracks this.  This could mean re-emitting
viewport state when switching, but hopefully this is offset by doing
1/16th of the work in the common case.  The new flag is also lighter
weight than BRW_NEW_VUE_MAP_GEOM_OUT, which we were using in one case.

According to Eric Anholt, x11perf -copypixwin10 performance improves by
11.5094% +/- 3.10841% (n=10) on his Skylake.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Acked-by: Anuj Phogat <anuj.phogat@gmail.com>

spirv: translate cull distance semantic.

This just translates to the correct cull distance slot.

Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

compiler: add printable values for cull distance varyings.

We need these for spir-v/nir shaders.

Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Dave Airlie <airlied@redhat.com>

nir/spirv/cfg: Use a nop intrinsic for tagging the ends of blocks

Previously, we were saving off the last nir_block in a vtn_block before
moving on so that we could find the nir_block again when it came time to
handle phi sources.  Unfortunately, NIR's control flow modification code is
inconsistent when it comes to how it splits blocks so the block pointer we
saved off may point to a block somewhere else in the shader by the time we
get around to handling phi sources.  In order to get around this, we insert
a nop instruction and use that as the logical end of our block.  Since the
control flow manipulation code respects instructions, the nop will keeps
its place like any other instruction and we can easily find the end of our
block when we need it.

This fixes a bug triggered by a couple of vkQuake shaders.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97233
Cc: "12.0" <mesa-stable@lists.freedesktop.org>
Tested-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

nir: Add a nop intrinsic

This intrinsic has no destination, no sources, no variables, and can be
eliminated.  In other words, it does nothing and will always get deleted by
dead code elimination.  However, it does provide a quick-and-easy way to
temporarily tag a particular location in a NIR shader.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

intel/isl: Allow non-2D HiZ surfaces

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

intel/isl: Add a detailed comment about multisampling with HiZ

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

intel/isl: Remove tiling checks from choose_msaa_layout

We already do those checks in filter_tiling.  There's no good reason to
repeat them in choose_msaa_layout.  If anything they should have been
asserts and not "return false" checks.  Also, this check was causing us to
outright reject multisampled HiZ surfaces which wasn't intended.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

intel/isl: Handle HiZ and CCS tiling more directly

The HiZ and CCS tiling formats are always used for HiZ and CCS surfaces
respectively.  There's no reason why we should go through filter_tiling and
it's much easier to always get HiZ and CCS right if we just handle them
directly.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

intel/isl: Allow multisampling with ISL_FORMAT_HiZ

HiZ buffers can be multisampled and, on Broadwell and earlier, simply using
interleaved multisampling with a compression block size of 8x4 samples
yields the correct HiZ surface size calculations.  Unfortunately,
choose_msaa_layout was rejecting multisampled HiZ buffers because of format
checks.  Now that we have a simple helper for determining if a format
supports multisampling, that's an easy enough issue to fix.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

intel/isl: Allow creation of 1-D compressed textures

Compressed 1-D textures are not well-defined thing in either GL or Vulkan.
However, auxiliary surfaces are treated as compressed textures in ISL and
we can do HiZ and CCS with 1-D so we need to be able to create them.  In
order to prevent actually using them (the docs say no), we assert in the
state setup code.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

intel/isl: Fix up asserts in calc_phys_level0_extent_sa

The assertion that a format is uncompressed in the multisample layouts
isn't quite right.  What we really want to assert is that the format
supports multisampling which is a bit more complicated query.  We also want
to assert that it has a block size of 1x1 since we do nothing with the
block size in the phys_level0_sa assignment.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

intel/isl: Add a format_supports_multisampling helper

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Reviewed-by: Chad Versace <chadversary@chromium.org>
Reviewed-by: Nanley Chery <nanley.g.chery@intel.com>

vl/dri3: fix warning about incompatible pointer type

Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Reviewed-by: Leo Liu <leo.liu@amd.com>

swr: Removed stalling SwrWaitForIdle from queries.

Previous fundamental change in stats gathering added a temporary
SwrWaitForIdle to begin_query and end_query.  Code has been reworked to
remove stall.

Reviewed-by: George Kyriazis <george.kyriazis@intel.com>

swr: [rasterizer core] refactor thread creation

Create worker pool now computes number of worker threads based on
things like topologies, etc. and creates the pool but doesn't actually
launch the threads. Instead there is a separate start thread pool
function. This allows thread resources to be constructed first before
threads start.

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer jitter] canonicalize blend compile state

Canonicalize to prevent unnecessary JIT compiles.

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer core] archrast fixes

- Immediately sleep threads until thread data is initialized
- Fix some compile bugs with AR enabled

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer jitter] fixes for icc in vs2015 compat mode

- Move most jitter functionality into SwrJit namespace
- Avoid global "using namespace llvm" in headers

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer core] generalize compute dispatch mechanism

Generalize compute dispatch mechanism to support other types of dispatches.

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

swr: [rasterizer common] os.h portability header changes

- Fix conflict between windows MemoryFence and llvm::sys::MemoryFence
- Declare gettid()

Signed-off-by: Tim Rowley <timothy.o.rowley@intel.com>

anv/formats: Fix build on gcc-4 and earlier

gcc-4 and earlier don't allow compound literals where a constant
is required in -std=c99/gnu99 mode, so we can't use ISL_SWIZZLE()
when populating the anv_formats[] array. There are a few ways around
it: First one would be -std=c89/gnu89, but the rest of the code
depends on c99 so it's not really an option. The second option
would be to upgrade to gcc-5+ where the compiler behaviour was relaxed
a bit [1]. And the third option is just to avoid using compound
literals. I chose the last option since it keeps gcc-4 and earlier
working.

[1] https://gcc.gnu.org/gcc-5/porting_to.html

Cc: Jason Ekstrand <jason@jlekstrand.net>
Cc: Topi Pohjolainen <topi.pohjolainen@intel.com>
Fixes: 7ddb21708c80 ("intel/isl: Add an isl_swizzle structure and use it for isl_view swizzles")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

egl: stop claiming support for pbuffer + msaa

This fixes a crash in egl-create-msaa-pbuffer-surface Piglit test
and same crash in many dEQP EGL tests.

I also found that some Qt example did a workaround because of this
crash: https://bugreports.qt.io/browse/QTBUG-47509

v2: Ian pointed out that v1 removed support for all multisample
    configs, including window ones. This one removes pbuffer bit
    when adding configs, now only pbuffer+msaa gets rejected and
    window+msaa continues to work. Fixed also comment (Emil)

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Emil Velikov <emil.velikov@collabora.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965: rename max_ds_* variable to max_tes_*

Using consistent naming allows us to create macros more easily.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: rename max_hs_* variables to max_tcs_*

Using consistent naming allows us to create macros more easily.

Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965: Drop pointless stage == MESA_SHADER_FRAGMENT checks.

There's an assert right above this.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

glsl: add missing headers to blob.h

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

nir/spirv/cfg: Detect switch_break after loop_break/continue

While the current CFG code is valid in the case where a switch break also
happens to be a loop continue, it's a bit suboptimal.  Since hardware is
capable of handling the continue as a direct jump, it's better to use a
continue instruction when we can than to bother with all of the nasty
switch break lowering.

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

nir/spirv/cfg: Handle switches whose break block is a loop continue

It is possible that the break block of a switch is actually the continue of
the loop containing the switch.  In this case, we need to identify the
break block as a continue and break out of current level of CFG handling.
If we don't, the continue portion of the loop will get handled twice, once
by following after the break and a second time by the loop handling code
handling it explicitly.

This fixes 6 of the new Vulkan CTS tests:
 - dEQP-VK.spirv_assembly.instruction.graphics.opphi.out_of_order*
 - dEQP-VK.spirv_assembly.instruction.graphics.selection_block_order.out_of_order*

Signed-off-by: Jason Ekstrand <jason@jlekstrand.net>
Cc: "12.0" <mesa-stable@lists.freedesktop.org>

nir/spirv: add spirv2nir binary to .gitignore

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir/spirv: improve mmap() error handling

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir/spirv: improve lseek() error handling

Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

nir/spirv: add some error checking to open()

CovID: 1373369
Signed-off-by: Eric Engestrom <eric@engestrom.ch>
Reviewed-by: Jason Ekstrand <jason@jlekstrand.net>

mesa: use uint32_t rather than unsigned for xfb struct members

These structs will be written to disk as part of the shader cache
so use uint32_t just to be safe.

Reviewed-by: Jason Ekstrand <jason.ekstrand@intel.com>

i915/i965: remove commented out warning

The warning was also the wrong location, it should have been
in the else.

Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

mesa: move _mesa_valid_to_render() to api_validate.c

Almost all of the other drawing validation code is in api_validate.c
so put this function there as well.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>

gallium/hud: Add support for CPU frequency monitoring

Detect all of the CPUs in the system. Expose metrics
for min, max and current frequency in Hz.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

Revert "gallium/hud: automatically print % if max_value == 100"

This reverts commit dbfeb0ec12d6550e68de1bcd164e422e79bccf2d.

With max_value being rounded to 100, it's often wrong.

Reviewed-by: Brian Paul <brianp@vmware.com>

docs: update the list of Mesa major versions and API support

Reviewed-by: Emil Velikov <emil.velikov@collabora.com>

gallium/radeon: fix crash/regression in performance counters

Regression introduced by "gallium/radeon: zero all query buffers".

Cc: Michel Dänzer <michel@daenzer.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon: update documentation of buffer_get_virtual_address

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon: emit relocations for query fences

This is only needed for r600 which doesn't have ARB_query_buffer_object and
therefore wouldn't really need the fences, but let's be optimistic about
filling in this feature gap eventually.

Cc: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeon/uvd: adjust the buffer offset when relocation is used

We don't plan to use sub-allocated buffers with UVD, but just in case one
slips through, this increases the chances of things working out anyway.

Reviewed-by: Christian König <christian.koenig@amd.com>

radeon/vce: adjust the buffer offset when relocation is used

We don't plan to use sub-allocated buffers with VCE, but just in case one
slips through, this increases the chances of things working out anyway.

Reviewed-by: Christian König <christian.koenig@amd.com>

radeon/video: don't use sub-allocated buffers

Cc: Christian König <christian.koenig@amd.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97976
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=97969
Reviewed-by: Christian König <christian.koenig@amd.com>

gallium/hud: Add power sensor support

Implement support for power based sensors, reporting units in
milli-watts and watts.

Also, minor cleanup - change the related if block to a switch.

Tested with two different power sensors, including the nouveau
'power1' sensors on a GTX950 card.

Signed-off-by: Steven Toth <stoth@kernellabs.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

nv50/ir: teach insnCanLoad() about SHLADD

Commutativity is not allowed with SHLADD, but src2 can accept
loads. To allow the load propagation pass to do its job, add a
special case like for SUCLAMP because src1 is always an immediate.

This IMAD to SHLADD optimization helps a bunch of shaders from Tomb
Raider, Victor Vran, UE4 demos (+15% perf with Elemental) and Shadow
Warrior.

GF100/GK104:

total instructions in shared programs :2838045 -> 2834712 (-0.12%)
total gprs used in shared programs    :396684 -> 396386 (-0.08%)
total local used in shared programs   :34416 -> 34416 (0.00%)

                local        gpr       inst      bytes
    helped           0         326        1105        1105
      hurt           0          55           3           3

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nv50/ir: optimize SHLADD(a, b, c) to MOV((a << b) + c)

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nv50/ir: optimize SHLADD(a, b, 0x0) to SHL(a, b)

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nv50/ir: optimize IMAD to SHLADD in presence of power of 2

Only and only if src1 is a power of 2 we can replace IMAD by SHLADD.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0/ir: add emission for SHLADD

Unfortunately, we can't use the emit helpers for GF100/GK110
because src1 and src2 are swapped.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nv50/ir: add preliminary support for SHLADD

This instruction is available since SM20 (Fermi) and allow to do
(a << b) + c in one shot. In some situations, IMAD should be
replaced by SHLADD when b is a power of 2, and ADD+SHL should be
replaced by SHLADD as well.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

nvc0: update GM107 sched control codes format

envyas now uses a much better representation for those control
codes and it displays the different flags instead of an
unreadable hex number.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>

gallium/radeon: use smaller buffers for query results

Most of the time, even the 512 bytes that we now get is more than sufficient
(pipeline stats queries are the largest at 184 bytes per shot).

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon/winsyses: add radeon_winsys::min_alloc_size

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: enable ARB_query_buffer_object (v2)

v2: enable only when compute is available

Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

gallium/radeon: implement get_query_result_resource (v2)

v2: fix a comment (Gustaw Smolarczyk)

Acked-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>