Luke Kenneth Casson Leighton [Thu, 31 May 2018 15:10:42 +0000 (16:10 +0100)]
autopep8 cleanup
Luke Kenneth Casson Leighton [Thu, 24 May 2018 08:57:11 +0000 (09:57 +0100)]
make mdwn path if it doesnt exist
Luke Kenneth Casson Leighton [Wed, 23 May 2018 10:18:48 +0000 (11:18 +0100)]
correct Makefile path
Luke Kenneth Casson Leighton [Fri, 27 Apr 2018 10:15:20 +0000 (11:15 +0100)]
microtest experimenting
Luke Kenneth Casson Leighton [Fri, 27 Apr 2018 09:07:30 +0000 (10:07 +0100)]
even remove gpio, microtest still too big
Luke Kenneth Casson Leighton [Fri, 27 Apr 2018 09:06:29 +0000 (10:06 +0100)]
add microtest, minitest still too big
Luke Kenneth Casson Leighton [Fri, 27 Apr 2018 09:06:13 +0000 (10:06 +0100)]
clean up Makefile
Luke Kenneth Casson Leighton [Fri, 27 Apr 2018 08:33:11 +0000 (09:33 +0100)]
add Makefile/lib auto-generator
Luke Kenneth Casson Leighton [Sat, 14 Apr 2018 11:32:55 +0000 (12:32 +0100)]
use bit width consistently for mux cells
Luke Kenneth Casson Leighton [Sat, 14 Apr 2018 11:28:03 +0000 (12:28 +0100)]
must declare mux selection same bitwidth
Luke Kenneth Casson Leighton [Sat, 14 Apr 2018 11:16:19 +0000 (12:16 +0100)]
put cell width at fixed (max) bits
Neel [Sat, 14 Apr 2018 11:11:00 +0000 (16:41 +0530)]
the assignment of a wire from an input configured pin must happen through individual rules. The pinmuxing table might be defined such a way that input pins pin0 and pin2 drive the same function wrfunc. So pin0 using wrcell0_mux to assign wrfunc and pin2 uses wrcell2_mux to assign the same write again. Within the same rule this will cause a multi-driven issue. BSV takes care of this issue by generating an implicit priority between the rules. If rule-A is written before rule-B, then the effects of rule-B will be shadowed i.e only the output of rule-A will be visible.
Luke Kenneth Casson Leighton [Mon, 9 Apr 2018 14:04:36 +0000 (15:04 +0100)]
add busenable output
Luke Kenneth Casson Leighton [Mon, 9 Apr 2018 13:24:55 +0000 (14:24 +0100)]
record bus/ganged type in tsv spec files
Luke Kenneth Casson Leighton [Wed, 4 Apr 2018 09:32:39 +0000 (10:32 +0100)]
add documentation on pinfunctions
Luke Kenneth Casson Leighton [Wed, 4 Apr 2018 09:25:55 +0000 (10:25 +0100)]
return which pins are inout-buses from spec pinfunctions
Luke Kenneth Casson Leighton [Wed, 4 Apr 2018 08:38:54 +0000 (09:38 +0100)]
split bsv generator into functions
Luke Kenneth Casson Leighton [Wed, 4 Apr 2018 08:38:37 +0000 (09:38 +0100)]
whitespace pep8 cleanup
Luke Kenneth Casson Leighton [Sat, 31 Mar 2018 14:28:14 +0000 (15:28 +0100)]
selector test goes in opposite direction
Luke Kenneth Casson Leighton [Sat, 31 Mar 2018 14:12:27 +0000 (15:12 +0100)]
add myhdl mux.py experiment
Luke Kenneth Casson Leighton [Sat, 31 Mar 2018 08:25:23 +0000 (09:25 +0100)]
clean up pinspec, remove redundant arguments
Luke Kenneth Casson Leighton [Sat, 31 Mar 2018 08:06:13 +0000 (09:06 +0100)]
big pep8 whitespace cleanup
Luke Kenneth Casson Leighton [Sat, 31 Mar 2018 08:02:33 +0000 (09:02 +0100)]
add base class for scenario and pinspecs
Luke Kenneth Casson Leighton [Sat, 31 Mar 2018 07:23:48 +0000 (08:23 +0100)]
big python3 interoperability update
Luke Kenneth Casson Leighton [Sat, 31 Mar 2018 07:02:06 +0000 (08:02 +0100)]
write out to mdwn file instead of stdout
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 13:46:03 +0000 (14:46 +0100)]
autopep8 whitespace cleanup
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 13:45:18 +0000 (14:45 +0100)]
add some documentation to the spec modules
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 13:05:50 +0000 (14:05 +0100)]
update minitest spec
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 13:04:18 +0000 (14:04 +0100)]
rework spec generation functions
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 12:26:05 +0000 (13:26 +0100)]
refactoring pin function name generators
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 10:00:01 +0000 (11:00 +0100)]
fix UARTQ0 spec
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 09:58:45 +0000 (10:58 +0100)]
rename m_class spec jtag and ulpi numbers
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 09:42:12 +0000 (10:42 +0100)]
rename m_class spec uart numbers
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 09:37:13 +0000 (10:37 +0100)]
rename m_class spec spi numbers
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 09:36:30 +0000 (10:36 +0100)]
rename m_class spec sd numbers
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 09:34:17 +0000 (10:34 +0100)]
renumber interfaces start from zero
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 09:25:12 +0000 (10:25 +0100)]
remove debug print statements
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 09:24:31 +0000 (10:24 +0100)]
adjust minitest layout
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 09:10:15 +0000 (10:10 +0100)]
add mini spec for test purposes
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 09:10:00 +0000 (10:10 +0100)]
check pin position overwriting
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 09:03:16 +0000 (10:03 +0100)]
whoops not commented out properly
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 06:58:31 +0000 (07:58 +0100)]
remove print statement
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 06:57:01 +0000 (07:57 +0100)]
pep8 whitespace cleanup
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 06:56:40 +0000 (07:56 +0100)]
autopep8 being a bit over-zealous...
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 06:50:58 +0000 (07:50 +0100)]
explain flexspec, its extra functions to be added basically
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 06:42:36 +0000 (07:42 +0100)]
autopep8 whitespace cleanup
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 06:41:20 +0000 (07:41 +0100)]
move spec functions into Pinouts class
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 06:21:34 +0000 (07:21 +0100)]
bug in m_class spec, flexbus pins being overwritten
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 06:21:07 +0000 (07:21 +0100)]
rename functions with single instances
Luke Kenneth Casson Leighton [Fri, 30 Mar 2018 06:04:27 +0000 (07:04 +0100)]
add a "single" mode to Interfaces, stops number being inserted gpioa{0}_a0
is now gpioa_a0
Neel [Thu, 29 Mar 2018 15:51:50 +0000 (21:21 +0530)]
updated bluespec search paths
Neel [Thu, 29 Mar 2018 15:51:29 +0000 (21:21 +0530)]
bitspec if now of type "Bit#(?)" or GenericIOType
Neel [Thu, 29 Mar 2018 15:50:54 +0000 (21:20 +0530)]
cell interface is now a single output method of GenericIOType instead of multiple different methods.
Neel [Thu, 29 Mar 2018 15:49:49 +0000 (21:19 +0530)]
creating a single rule to assign function inputs from IOs based on mux lines
Luke Kenneth Casson Leighton [Thu, 29 Mar 2018 13:59:22 +0000 (14:59 +0100)]
adding test on migen pinmux
Luke Kenneth Casson Leighton [Thu, 29 Mar 2018 13:20:28 +0000 (14:20 +0100)]
write out pinspec to pinspec.txt
Luke Kenneth Casson Leighton [Thu, 29 Mar 2018 13:18:51 +0000 (14:18 +0100)]
add pinbank starting points and sizes
Luke Kenneth Casson Leighton [Thu, 29 Mar 2018 13:08:13 +0000 (14:08 +0100)]
add migen safe input mux
Luke Kenneth Casson Leighton [Thu, 29 Mar 2018 08:33:21 +0000 (09:33 +0100)]
whitespace python3 cleanup
Luke Kenneth Casson Leighton [Thu, 29 Mar 2018 08:33:05 +0000 (09:33 +0100)]
whoops need __contains__ due to pep8 replacement in for has_key
Luke Kenneth Casson Leighton [Thu, 29 Mar 2018 08:23:51 +0000 (09:23 +0100)]
stronger autopep8 whitespace cleanup
Luke Kenneth Casson Leighton [Thu, 29 Mar 2018 08:20:32 +0000 (09:20 +0100)]
add fixed pins generation
Luke Kenneth Casson Leighton [Wed, 28 Mar 2018 15:47:30 +0000 (16:47 +0100)]
add TODO assert for now
Luke Kenneth Casson Leighton [Wed, 28 Mar 2018 15:38:54 +0000 (16:38 +0100)]
sort out pwm naming scheme
Luke Kenneth Casson Leighton [Wed, 28 Mar 2018 15:12:35 +0000 (16:12 +0100)]
fix pinmerge issue, merge pingroup
Luke Kenneth Casson Leighton [Wed, 28 Mar 2018 14:42:48 +0000 (15:42 +0100)]
fix incompatibility between spec gen and pinmux code-gen
Luke Kenneth Casson Leighton [Wed, 28 Mar 2018 14:16:06 +0000 (15:16 +0100)]
remove manual dictionary, use interface txt file definitions
Luke Kenneth Casson Leighton [Tue, 27 Mar 2018 14:56:41 +0000 (15:56 +0100)]
big autopep8 whitespace cleanup, not run before on pinmux spec code
Luke Kenneth Casson Leighton [Tue, 27 Mar 2018 14:53:51 +0000 (15:53 +0100)]
first effort at generating pinmap.txt
Luke Kenneth Casson Leighton [Tue, 27 Mar 2018 14:38:43 +0000 (15:38 +0100)]
whoops forgot to initialise pinspec variable in __main__
Luke Kenneth Casson Leighton [Tue, 27 Mar 2018 07:17:25 +0000 (08:17 +0100)]
split out interface printing functions to separate module
Luke Kenneth Casson Leighton [Tue, 27 Mar 2018 07:14:40 +0000 (08:14 +0100)]
rename EINT, add underscore for consistency
Luke Kenneth Casson Leighton [Tue, 27 Mar 2018 07:09:12 +0000 (08:09 +0100)]
reduce I2S to 5-pin width
Luke Kenneth Casson Leighton [Tue, 27 Mar 2018 07:08:37 +0000 (08:08 +0100)]
add inout spec
Luke Kenneth Casson Leighton [Tue, 27 Mar 2018 06:41:15 +0000 (07:41 +0100)]
begin generating spec files consistently: codes a bit of a mess
Luke Kenneth Casson Leighton [Tue, 27 Mar 2018 05:42:20 +0000 (06:42 +0100)]
add help message for spec
Luke Kenneth Casson Leighton [Sun, 25 Mar 2018 11:49:40 +0000 (12:49 +0100)]
got fed up of doing functions used class instead for Pinouts
Luke Kenneth Casson Leighton [Sat, 24 Mar 2018 00:45:34 +0000 (00:45 +0000)]
write out interfaces.txt first version
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 23:07:13 +0000 (23:07 +0000)]
add spec generation
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 22:55:56 +0000 (22:55 +0000)]
add pinspec generator
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 16:55:04 +0000 (16:55 +0000)]
pep8, whitespace cleanup
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 16:47:37 +0000 (16:47 +0000)]
move more modules to src/bsv directory
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 16:45:30 +0000 (16:45 +0000)]
move pinmux generator function to src/bsv directory
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 16:43:44 +0000 (16:43 +0000)]
move pinmux generator function to src/bsv directory
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 14:26:56 +0000 (14:26 +0000)]
whitespace cleanup
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 14:23:31 +0000 (14:23 +0000)]
update Makefile add test directory parameter
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 14:20:15 +0000 (14:20 +0000)]
move interface and pinmux definition to test directory
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 14:10:06 +0000 (14:10 +0000)]
add help message and options to specify source path
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 13:54:14 +0000 (13:54 +0000)]
add path argument to pinmuxgen function
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 13:34:35 +0000 (13:34 +0000)]
indent and functionify pinmux generator
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 13:33:54 +0000 (13:33 +0000)]
add path option to parse function
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 05:57:14 +0000 (05:57 +0000)]
class restructure parsing
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 05:44:53 +0000 (05:44 +0000)]
remove if brackets
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 05:44:25 +0000 (05:44 +0000)]
remove if brackets
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 05:34:10 +0000 (05:34 +0000)]
slight style-alteration on pinmap.txt parsing
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 05:20:20 +0000 (05:20 +0000)]
slight logic change which seems to work on generating mux selector
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 05:11:58 +0000 (05:11 +0000)]
use assert not if/print/exit
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 05:05:56 +0000 (05:05 +0000)]
pycodestyle warned variable name l was ambiguous
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 05:04:59 +0000 (05:04 +0000)]
whitespace cleanup
Luke Kenneth Casson Leighton [Fri, 23 Mar 2018 04:51:49 +0000 (04:51 +0000)]
not a fan of brackets on if statements... :)