i965/surface_state: Drop brw_aux_surface_disabled

The only purpose of this function is to disable aux on texture surfaces
when the corresponding renderbuffer has aux disabled.  However, the act
of disabling aux on the renderbuffer will cause it to be resolved and
intel_miptree_texture_aux_usage will already check the resolved status
of a texture and return ISL_AUX_USAGE_NONE for it.  Even if we used CCS
for it, that wouldn't really be a problem because the CCS will be in the
pass-through state and so it would effectively be ignored.

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/miptree: Add an aux_disabled parameter to render_aux_usage

Only one of the callers of intel_miptree_render_aux_usage actually took
brw->draw_aux_buffer_disabled into account.  This was causing us to
ignore draw_aux_buffer_disabled for the intel_miptree_prepare_render.
This isn't a problem because the draw_aux_buffer_disabled entry was set
during texture preparation and we already did the resolve at that time.
However, this also meant that the aux_usage we were passing to
brw_cache_flush_for_render and brw_render_cache_add_bo was wrong so our
automatic cache flushing around aux_usage changes wasn't happening.
This was causing GPU hangs in Oxenfree.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104711
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104411
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104383
Fixes: ea0d2e98ecb369ab84e78c84709c0930ea8c293a
Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

i965/miptree: Take an aux_usage in prepare/finish_render

Both callers of intel_miptree_prepare/finish_render have to call
intel_miptree_render_aux_usage anyway for other reasons.  They may as
well pass the result in instead of us calling it again.

Cc: mesa-stable@lists.freedesktop.org
Reviewed-by: Iago Toral Quiroga <itoral@igalia.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

aubinator: Multiply count by 4 to compute buffer sizes

The count field is in terms of dwords and not bytes.

st/glsl_to_nir: remove reallocation of sampler/image location

As far as I can tell this always just reassigns the same value.

Also as we don't curretly store UniformHash in the shader cache
removing this will help with adding a shader cache to gallium
nir drivers.

Reviewed-by: Rob Clark <robdclark@gmail.com>

docs: add 18.1.0-devel release notes template

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>

mesa: bump version to 18.1.0-devel

Signed-off-by: Jordan Justen <jordan.l.justen@intel.com>

meson: handle LLVM 'x.x.xgit-revision' versions

When LLVM is built inside of a git repo (even way below, e.g. /usr/ports/.git
exists, and LLVM is built in /usr/ports/devel/llvm50/work), its version
becomes something like 5.0.0git-f8ab206b2176.

New meson versions already handle this, but we support older versions too.

Fixes: 673dda8330769 ("meson: build "radv" vulkan driver for radeon hardware")
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

meson: fix getting cflags from pkg-config

get_pkgconfig_variable('cflags') always returns an empty list, it's a
function for getting *custom* variables.

Meson does not yet support asking for cflags, so explicitly invoke
pkg-config for now.

Fixes: 68076b87474e ("meson: build gallium vdpau state tracker")
Fixes: a817af8a89eb ("meson: build gallium xvmc state tracker")
Fixes: 1d36dc674d52 ("meson: build gallium omx state tracker")
Fixes: 5a785d51a6d6 ("meson: build gallium va state tracker")
Reviewed-by: Dylan Baker <dylan.c.baker@intel.com>

meson: fix BSD build

CC: 18.0 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

meson: fix missing dependencies

Fixes: 66f97f6640f5 ("meson: build radeonsi")
Reviewed-by: Emil Velikov <emil.velikov@colalbora.com>
Reviewed-by: Dylan Baker <dylan.c.baker@intel.com>

anv: correct a duplicate check in an assert

Looks like checking both sources was intended, instead of the first one
twice. Found with Coccinelle, coccinellery/xand/xand.cocci semantic patch.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Tapani Pälli <tapani.palli@intel.com>

meson: fix HAVE_LLVM version define in meson build

LLVM patch level is not included in HAVE_LLVM.

Fixes: e6418ab1566d ("meson: build "radv" vulkan driver for radeon hardware")
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Dylan Baker <dylan.c.baker@intel.com>
Signed-off-by: Marc Dietrich <marvin24@gmx.de>

meson: correctly set SYSCONFDIR for loading dirrc

Fixes: d1992255bb29 ("meson: Add build Intel "anv" vulkan driver")
Reported-by: Marc Dietrich <marvin24@gmx.de>
Signed-off-by: Dylan Baker <dylan.c.baker@intel.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

radv: add multisample Z optimisation from amdvlk

This was just found while reading for other stuff,
src/core/hw/gfxip/gfx6/gfx6DepthStencilView.cpp.

Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: move spi_baryc_cntl to pipeline

We need to enable the pos float location 2 mode anytime we have
persample not just when forced by the frag shader.

This fixes:
dEQP-VK.pipeline.multisample.min_sample_shading*

Fixes: 58c97a079 (radv: enable location at sample when persample is forced.)
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

gallium/u_tests: add texture_barrier and FBFETCH tests

Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

radeonsi: don't ignore pitch for imported textures

Cc: 17.2 17.3 <mesa-stable@lists.freedesktop.org>
Tested-by: Dieter Nützel <Dieter@nuetzel-hh.de>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>

meson: Fix define for USE_SSE41

Before we were adding -DHAVE_SSE41 which isn't what the code is
looking for, so some uses of the sse4.1 code were always being
skipped.

v2: Don't add any compile check for the quite old -msse4.1 option (Dylan)

Fixes: 84486f6462 ("meson: Enable SSE4.1 optimizations")
Reviewed-by: Dylan Baker <dylan@pnwbakers.com>

mesa/st/glsl_to_tgsi: remove now unneeded assert.

With the implementation of the tracking of the registers used in reladdr
asserting that a driver calling merge_register() uses the address register
is no longer needed.

Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>

mesa/st/tests: Add tests for lifetime tracking with indirect addressing

Add a code line type that accepts one layer of indirect addressing and
add tests to check that temporary register access used for indirect
addressing is accounted for in the lifetime estimation.

Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>

mesa/st/glsl_to_tgsi: Add tracking of indirect addressing registers

So far indirect addressing was not tracked to estimate the temporary
life time, and it was not needed, because code to load the address
registers was always emitted eliminating the reladdr* handles in the
past glsl-to.tgsi stages. Now, with Mareks patch allowing any 1D register
to be used for addressing on some hardware this changed, and
the tracking becomes necessary.

Because the registers have no direct indication on whether the reladdr* was
already loaded into an address register, the temporaries in reladdr* are
always tracked as reads. This may result in a slight over-estimation of the
lifetime in the cases when the load to the address register was emitted.

v2: no changes
v3: Use debug_log variable instead of directly writing to std::err in debugging
    output.
v6: fix indention and typos

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> (v1)
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>

mesa/st/tests: Add tests for improved tracking of temporaries

Additional tests are added that check the tracking of access to temporaries
in if-else branches.

Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>

mesa/st/glsl_to_tgsi: Add tracking of ifelse writes in register merging

Improve the life-time evaluation of temporary registers by also tracking
writes in both if and else branches and in up to 32 nested scopes.
As a result the estimated required register life-times can be further
reduced enabling more registers to be merged.

Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>

mesa/st/tests: cleanup whitespace usage and correct some comments

Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>

mesa/st/tests: unify MockCodeLine* classes

 * Merge the classes MockCodeLine and MockCodelineWithSwizzle into
   one, and  refactor tests accordingly.
 * Change memory allocations to use ralloc* interface.

 v2:
 * move the test classes into a conveniance library
 * rename the Mock* classes to Fake* since they are not really
   Mocks
 * Base assertion of correct number of src and dst registers in tests
   on what the operatand actually expects
 * Fix number of destinations in one test

 v6:
 * fix local includes using "..." insteadof <...>

Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>

mesa/st/tests: Fix zero-byte allocation leaks

Don't allocate a zero-sized array, when no texture offsets are given.

v5: correct spaces and empty lines

Reviewed-by: Brian Paul <brianp@vmware.com>(v4)
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com> (v1)
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>

mesa/st/glsl_to_tgsi: Add some operators for glsl_to_tgsi related classes

Add the equal operator and the "<<" stream write operator for the
st_*_reg classes and the "<<" operator to the instruction class, and
make use of these operators in the debugging output.

v5: Fix empty lines

Reviewed-by: Brian Paul <brianp@vmware.com> (v4)
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>

mesa/program: Add missing file types to printout

Reviewed-by: Brian Paul <brianp@vmware.com>
Signed-off-by: Gert Wollny <gw.fossdev@gmail.com>

vbo: fix incorrect min/max_index values in display list draw call

This fixes another regression from commit 8e4efdc895ea ("vbo: optimize
some display list drawing").  The problem was the min_index, max_index
values passed to the vbo drawing function were not computed to compensate
for the biased prim::start values.

https://bugs.freedesktop.org/show_bug.cgi?id=104746
https://bugs.freedesktop.org/show_bug.cgi?id=104742
https://bugs.freedesktop.org/show_bug.cgi?id=104690
Tested-by: Clayton Craft <clayton.a.craft@intel.com>
Fixes: 8e4efdc895ea ("vbo: optimize some display list drawing")
Reviewed-by: Emil Velikov <emil.velikov@collabora.co.uk>

vbo: whitespace/formatting fixes in vbo_split_inplace.c

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

vbo: whitespace/formatting fixes in vbo.h

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

vbo/i965: move vbo_all_varyings_in_vbos() to brw_draw.c

It's only used in brw_draw_prims().

s/GLboolean/bool/, etc.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

vbo: remove unused vbo_any_varyings_in_vbos() function

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

vbo: remove unneeded #includes

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

vbo: remove vbo_context.h and change includes to use vbo.h instead

Now vbo.h is the public interface to the VBO module.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

vbo: move remaining items from vbo_context.h to vbo.h

Non-VBO sources files sometimes included vbo.h while others included
vbo_context.h.  We're moving all public types, functions to the former.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

vbo: move VBO-private types, prototypes, etc. into new vbo_private.h header

Things which should not be used outside the VBO module.
More public/private clean-ups coming.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

mesa: use new _vbo_install_exec_vtxfmt() function

Instead of reaching into the vbo_context object in vtxfmt.c

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

nouveau: remove vbo_context() call

_vbo_DestroyContext() can be safely called even if there's no VBO
module.  Removes a dependency on the vbo_context() function.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

i965: use vbo_set_[indirect]_draw_func()

Instead of poking into the vbo_context object.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

vbo: move vbo_sizeof_ib_type() into vbo_exec_array.c

It's only used in this one file.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

mesa: move vbo_count_tessellated_primitives() to api_validate.c

It's only used in this file and has nothing VBO-specific about it.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

mesa: update comment on gl_display_list

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

mesa: whitespace clean-ups in mtypes.h

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

mesa: remove unused MAT_INDEX_AMBIENT/DIFFUSE/SPECULAR contants

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

vbo: move DLIST_DANGLING_REFS from mtypes.h to vbo_save_api.c

It's only used in this file.

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

vbo: replace assert(0) with unreachable()

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

vbo: fix, add comment in vbo_save.h

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

vbo: whitespace, formatting fixes in vbo_split.[ch]

Reviewed-by: Roland Scheidegger <sroland@vmware.com>

i965: Don't try to disable render aux buffers for compute

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=104546
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Signed-off-by: Topi Pohjolainen <topi.pohjolainen@intel.com>

anv/cmd_buffer: Move gen7 index buffer state to graphics state

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv/cmd_buffer: Move num_workgroups to compute state

While we're here, make it an anv_address.

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv/cmd_buffer: Move dynamic state to graphics state

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv/cmd_buffer: Use a temporary variable for dynamic state

We were already doing this for some packets to keep the lines shorter.
We may as well just do it for all of them.

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv/cmd_buffer: Move vb_dirty bits into anv_cmd_graphics_state

Vertex buffers are entirely a graphics pipeline thing.

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv/cmd_buffer: Move dirty bits into anv_cmd_*_state

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv: Separate compute and graphics descriptor sets

The Vulkan spec says:

    "pipelineBindPoint is a VkPipelineBindPoint indicating whether the
    descriptors will be used by graphics pipelines or compute pipelines.
    There is a separate set of bind points for each of graphics and
    compute, so binding one does not disturb the other."

Up until now, we've been ignoring the pipeline bind point and had just
one bind point for everything.  This commit separates things out into
separate bind points.

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102897
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv/cmd_buffer: Use anv_descriptor_for_binding for samplers

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv/cmd_buffer: Add a helper for binding descriptor sets

This lets us unify some code between push descriptors and regular
descriptors.  It doesn't do much for us yet but it will.

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv/cmd_buffer: Refactor ensure_push_descriptor_set

It's now a function which returns the push descriptor set.  Since we set
the error on the command buffer, returning the error is a little
redundant.  Returning the descriptor set (or NULL on error) is more
convenient.

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv: Remove semicolons from vk_error[f] definitions

With the semicolons, they can't be used in a function argument without
throwing syntax errors.

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv/cmd_buffer: Add substructs to anv_cmd_state for graphics and compute

Initially, these just contain the pipeline in a base struct.

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv/cmd_buffer: Use some pre-existing pipeline temporaries

There are several places where we'd already saved the pipeline off to a
temporary variable but, due to an artifact of history, weren't actually
using that temporary everywhere.  No functional change.

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv/cmd_buffer: Rework anv_cmd_state_reset

This splits anv_cmd_state_reset into separate init and finish functions.
This lets us share init code with cmd_buffer_create.  This potentially
fixes subtle bugs where we may have missed some bit of state that needs
to get initialized on command buffer creation.

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv/cmd_buffer: Get rid of the meta query workaround

Meta has been gone for a long time.

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv/cmd_state: Drop the scratch_size field

This is a legacy left-over from the mechanism we used to use to handle
scratch.  The new (and better) mechanism doesn't use this.

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

anv/pipeline: Don't assert on more than 32 samplers

This prevents an assert when running one unreleased Vulkan game.

Tested-by: Józef Kucia <joseph.kucia@gmail.com>
Reviewed-by: Topi Pohjolainen <topi.pohjolainen@intel.com>
Cc: "18.0" <mesa-stable@lists.freedesktop.org>

radv: fix sample_mask_in loading. (v3.1)

This is ported from radeonsi and fixes:
dEQP-VK.pipeline.multisample_shader_builtin.sample_mask.bit_*

v2: don't call this path for radeonsi, it does it in the epilog.
use the radeonsi code path.
v3: handle NULL pCreateInfo->pMultisampleState properly (Samuel)
v3.1: set ps_iter_samples default to 1 (Bas)

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fixes: bdcbe7c76 (radv: add sample mask input support)
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: don't use hw resolves for r16g16 norm formats.

radeonsi has a workaround for this, but it uses a R16A16 format,
which vulkan doesn't have, we could probably come up with a work
around but for now just avoid hw resolves.

Fixes:
dEQP-VK.renderpass.suballocation.multisample.r16g16_*norm*

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fixes: 2a04f5481d (radv/meta: select resolve paths)
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: don't use hw resolve for integer image formats

From reading AMDVLK it currently never uses hw resolve paths.

This patch takes from radeonsi which doesn't use hw resolve
for integer formats, and does the same for radv.

This fixes:
dEQP-VK.renderpass.suballocation.multisample*uint tests.

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fixes: 2a04f5481d (radv/meta: select resolve paths)
Signed-off-by: Dave Airlie <airlied@redhat.com>

radv: add fs_key meta format support to resolve passes.

Some of the hw resolve passes need the SPI color format setup
correctly.

This fixes lots of 16-bit and 32-bit format tests in
dEQP-VK.renderpass.suballocation.multisample*

Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fixes: f4e499ec7914 "radv: add initial non-conformant radv vulkan driver"
Signed-off-by: Dave Airlie <airlied@redhat.com>

winsys/svga: check correct member after create

.mob_fenced was already checked, probably a copy-paste bug.
Found by Coccinelle.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

svga: fix context alloc error handling

'cleanup' path is dereferencing 'svga' a lot, 'done' is a better choice.
Found by Coccinelle.

Signed-off-by: Grazvydas Ignotas <notasas@gmail.com>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

meson: remove lib prefix from libd3dadapter9.so

Fixes: 6b4c7047d57178d336 ("meson: build gallium nine state_tracker")
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Dylan Baker <dylan.c.baker@intel.com>

docs: update calendar 18.0.0-rc1 is out

Signed-off-by: Emil Velikov <emil.velikov@collabora.com>

radeon: remove left over dead code

Fixes: 4e0d99a63588c67a955f "r100: Use shared debug code"
Cc: Pauli Nieminen <suokkos@gmail.com>
Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Eric Anholt <eric@anholt.net>

docs: ask for backport nominations to cc: the author

Signed-off-by: Eric Engestrom <eric.engestrom@imgtec.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

meson: fix some defines misspelled errors in meson.build

Defines
- HAVE_FUNC_ATTRIBUTE_RETURNS_NONNULL
- HAVE_FUNC_ATTRIBUTE_VISIBILITY
were misspelled.

Signed-off-by: Marc Dietrich <marvin24@gmx.de>
Reviewed-by: Eric Engestrom <eric.engestrom@imgtec.com>

ac/nir: Use instance_rate_inputs per attribute, not per variable.

This did the wrong thing if we had e.g. an array for which only some
of the attributes use the instance index. Tripped up some new CTS
tests.

CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>

anv: Return trampoline entrypoints from GetInstanceProcAddr

Technically, the Vulkan spec requires that we return valid entrypoints
for all core functionality and any available device extensions.  This
means that, for gen-specific functions, we need to return a trampoline
which looks at the device and calls the right device function.  In 99%
of cases, the loader will do this for us but, aparently, we're supposed
to do it too.  It's a tiny increase in binary size for us to carry this
around but really not bad.

Before:
       text    data   bss      dec     hex  filename
    3541775  204112  6136  3752023  394057  libvulkan_intel.so

After:
       text    data   bss      dec     hex  filename
    3551463  205632  6136  3763231  396c1f  libvulkan_intel.so

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv/entrypoints: Use an named tuple for params

This allows us to store a bit more detailed data per-param

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv: Only advertise enabled entrypoints

The Vulkan spec annoyingly requires us to track what core version and
what all extensions are enabled and only advertise those entrypoints.
Any call to vkGet*ProcAddr for an entrypoint for an extension the client
has not explicitly enabled is supposed to return NULL.

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv: Add a per-device dispatch table

We also switch GetDeviceProcAddr over to use it.

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv: Add a per-instance dispatch table

We also switch GetInstanceProcAddr over to use it.

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv: Properly NULL for GetInstanceProcAddr with a null instance

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv/extensions: Fix VkVersion::c_vk_version for patch == None

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv/entrypoints: Parse entrypoints before extensions/features

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv/entrypoints: Expose the different dispatch tables

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv/entrypoints: Split entrypoint index lookup into its own function

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv/entrypoints: Add a LAYERS helper variable

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv/entrypoints: Add an Entrypoint class

Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv: Add a per-device table of enabled extensions

Nothing uses this at the moment, but we will need it soon.

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv: Use tables for device extension wrangling

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv: Add a per-instance table of enabled extensions

Nothing needs this yet but we will want it later.

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv: Use tables for instance extension wrangling

This lets us move a bunch of stuff out of codegen and back into
anv_device.c which is a bit nicer.

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv/extensions: Generate a header file with extension tables

This allows us better introspection into extensions.

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv/meson: Simplify some dependency and flag tracking

This removes some redundant code between libanv_common, libvulkan_intel,
and libvulkan_intel_test.

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv: Split anv_extensions.py into two files

The new anv_extensions_gen.py is the code generator while the old
anv_extensions.py file is purely declarative.

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>

anv/meson: Make anv_entrypoints_gen.py depend on anv_extensions.py

Reviewed-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>