panfrost: On Bifrost, set the right tiler descriptor

On both fragment and tiler jobs.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>

panfrost: Don't emit write_value jobs on Bifrost

As on Bifrost GPUs there's a different mechanism for reusing the tiler
data structures.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>

panfrost: Pass IS_BIFROST to pandecode_jc

So we can decode the right structures on Bifrost hw.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>

panfrost: Remove most usage of midgard_payload_vertex_tiler

By passing the prefix and postfix structs around, we can use most of the
cmdstream functions as well for bifrost, as those structs haven't
changed between midgard and bifrost.

Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>

panfrost: Unify vertex/tiler structures

Some fields were shuffled but these are essentially the same across the
generations.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>

panfrost: Staticize a few cmdstream functions

They are only used within the same source file.

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>

panfrost: Populate bifrost-specific structs within mali_shader_meta

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>

panfrost: Add IS_BIFROST quirk

Signed-off-by: Alyssa Rosenzweig <alyssa.rosenzweig@collabora.com>
Signed-off-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4505>

etnaviv: remove the "active" member of queries

The state tracker only gets to begin/query/destroy when !active and end
when active, so we have no need to try to track this ourselves.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4456>

etnaviv: change begin_query(..) to a void function

We always return true.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4456>

etnaviv: drop redundant calls to etna_acc_query_suspend(..)

Introduced by accident during rebase.

Signed-off-by: Christian Gmeiner <christian.gmeiner@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4456>

v3d: Primitive Counts Feedback needs an extra 32-bit padding.

Store Primitive Counts operations write 7 counters in 32-bit words
but also a padding 32-bit with 0. So we need 8 32-bit words instead
of the current 7 allocated.

This was causing an corruption in the next buffer when Transform
Feedback was enabled that were exposed on tests like:
dEQP-GLES3.functional.transform_feedback.*.points.*

This patch fixes 196 tests that were failing when they were run isolated
but they were passing when run using cts-runner.

Fixes: 0f2d1dfe65bf ("v3d: use the GPU to record primitives written to transform feedback")
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2674
Reviewed-by: Alejandro Piñeiro <apinheiro@igalia.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4501>

aco: make some reg_file helpers private and fix their uses

Fixes various subdword RA issues

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4492>

aco: rename aco_lower_bool_phis() -> aco_lower_phis()

We also lower subdword phis, now.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4492>

aco: lower subdword phis with SGPR operands

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4492>

aco: don't constant-propagate into subdword PSEUDO instructions

PSEUDO instructions are lowered using SDWA, and thus,
cannot take literals and before GFX9 cannot take constants
at all. As the in-register representation differs between
32bit and 16bit floats, we first need to ensure correct
behavior.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4492>

aco: ensure correct bit representation of subdword constants

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4492>

aco: setup subdword regclasses for ssa_undef & load_const

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4492>

aco: implement nir_op_b2f16/nir_op_i2f16/nir_op_u2f16

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit comparisons

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_fmax3/nir_op_fmin3/nir_op_fmed3

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_ldexp

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_f2i32/nir_op_f2u32

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_bcsel

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_fsign

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_fsat

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_fmul

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_fcos/nir_op_fsin

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_fsub/nir_op_fadd

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_fabs/nir_op_fneg

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_fmax/nir_op_fmin

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_ffloor/nir_op_fceil

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_fsqrt/nir_op_frcp/nir_op_frsq

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_ftrunc/nir_op_fround_even

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_fexp2/nir_op_flog2

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_ffract

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

aco: implement 16-bit nir_op_frexp_sig/nir_op_frexp_exp

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Daniel Schürmann <daniel@schuermann.dev>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4452>

intel/compiler: Remove cs_prog_data->threads

At this point all drivers are doing this math on their own -- since
most of them need to cover the variable group size case, in which at
compile time the group size (and number of threads) is not defined.

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>

iris: Stop using cs_prog_data->threads

This is a preparation for dropping this field since this value is
expected to be calculated by the drivers now for variable group size
case.  And also the field would get in the way of brw_compile_cs
producing multiple SIMD variants (like FS).

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>

anv: Stop using cs_prog_data->threads

Move the calculation to helper functions -- similar to what GL already
needs to do.

This is a preparation for dropping this field since this value is
expected to be calculated by the drivers now for variable group size
case.  And also the field would get in the way of brw_compile_cs
producing multiple SIMD variants (like FS).

Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>

i965: Implement ARB_compute_variable_group_size

This patch adds the implementation of ARB_compute_variable_group_size
for i965. We do this by storing the local group size in a push constant.

Additional changes made by Caio Marcelo de Oliveira Filho.

Signed-off-by: Plamena Manolova <plamena.manolova@intel.com>
Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>

intel/compiler: Add support for variable workgroup size

Add new builtin parameters that are used to keep track of the group
size.  This will be used to implement ARB_compute_variable_group_size.

The compiler will use the maximum group size supported to pick a
suitable SIMD variant.  A later improvement will be to keep all SIMD
variants (like FS) so the driver can select the best one at dispatch
time.

When variable workgroup size is used, the small workgroup optimization
is disabled as it we can't prove at compile time that the barriers
won't be needed.

Extracted from original i965 patch with additional changes by
Caio Marcelo de Oliveira Filho.

Reviewed-by: Caio Marcelo de Oliveira Filho <caio.oliveira@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>

intel/compiler: Replace cs_prog_data->push.total with a helper

The push.total field had three values but only one was directly
used (size).  Replace it with a helper function that explicitly takes
the cs_prog_data and the number of threads -- and use that in the
drivers.

This is a preparation for ARB_compute_variable_group_size where the
number of threads (hence the total size for push constants) is not
defined at compile time (not cs_prog_data->threads).

Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Jordan Justen <jordan.l.justen@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4504>

swr/rasterizer: Use private functions for min/max to avoid namespace issues.

This is a similiar fix as bb2287ccdf46 ("gallivm/tessellator: use
private functions for min/max to avoid namespace issues").

Fixes: ab5570820071 ("swr/rasterizer: Add tessellator implementation to the rasterizer")
Signed-off-by: Vinson Lee <vlee@freedesktop.org>
Reviewed-by: Jan Zielinski <jan.zielinski@intel.com>
Tested-by: Jan Zielinski <jan.zielinski@intel.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4208>

tu: Implement descriptor set update templates

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>

tu: Add missing code for immutable samplers

Actually fill out the samplers, based on the radv implementation.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>

tu: Emit CP_LOAD_STATE6 for descriptors

This restores the pre-loading of descriptor state, using the new
SS6_BINDLESS method that allows us to pre-load bindless resources.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>

tu: Switch to the bindless descriptor model

Under the bindless model, there are 5 "base" registers programmed with a
64-bit address, and sam/ldib/ldc and so on each specify a base register
and an offset, in units of 16 dwords. The base registers correspond to
descriptor sets in Vulkan. We allocate a buffer at descriptor set
creation time, hopefully outside the main rendering loop, and then
switching descriptor sets is just a matter of programming the base
registers differently. Note, however, that some kinds of descriptors
need to be patched at command recording time, in particular dynamic
UBO's and SSBO's, which need to be patched at CmdBindDescriptorSets
time, and input attachments which need to be patched at draw time based
on the the pipeline that's bound. We reserve the fifth base register
(which seems to be unused by the blob driver) for these, creating a
descriptor set on-the-fly and combining all the dynamic descriptors from
all the different descriptor sets. This way, we never have to copy the
rest of the descriptor set at draw time like the blob seems to do. I
mostly chose to do this because the infrastructure was already there in
the form of dynamic_descriptors, and other drivers (at least radv) don't
cheat either when implementing this.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>

ir3: Rewrite UBO push analysis to support bindless

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>

ir3: Plumb through bindless support

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>

ir3: LDC also has a destination

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>

ir3: Also don't propagate immediate offset with LDC

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>

ir3: Plumb through support for a1.x

This will need to be used in some cases for the upcoming bindless
support, plus ldc.k instructions which push data from a UBO to const
registers.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>

ir3: Add bindless instruction encoding

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>

freedreno/a6xx: Add registers for the bindless model

In Vulkan, descriptors for samplers, SSBO's, etc. are collected into
descriptor sets, and shaders can use multiple descriptor sets. At
command-recording time, users can swap out only some of the descriptor
sets, and the driver is supposed to do the minimum amount necessary to
update any internal binding tables, knowing that only some of the
descriptors have changed.

With the old binding model, focused on GL, where there are separate
tables for each type of resource, we can do somewhat better than now by
preserving descriptors from lower descriptor sets when switching higher
descriptor sets. However we still have to copy around descriptors before
each draw.

At least for a6xx, qualcomm went further, essentially copying the Vulkan
binding model as an alternate way to load resources. There's an array of
registers (actually an array for compute and one for everything else),
where each register holds a pointer to a descriptor set that can contain
various different descriptor types. The descriptors are padded out to 16
dwords, so that every instruction can use an index instead of a dword
offset. It's called "bindless", I think, because it can also be used to
implement the old GL bindless extensions (presumably it allows more
samplers and textures than the old model).

This commit adds the register and cmdstream parts. Next up will be the
instruction encoding.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>

freedreno/a6xx: Add UBO size field

Verified with the vulkan blob, which uses ldc and UBO descriptors, and
turnip will too soon.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>

tu: ir3: Emit push constants directly

Carve out some space at the beginning for push constants, and push them
directly, rather than remapping them to a UBO and then relying on the
UBO pushing code. Remapping to a UBO is easy now, where there's a single
table of UBO's, but with the bindless model it'll be a lot harder. I
haven't removed all the code to move the remaining UBO's over by 1,
though, because it's going to all get rewritten with bindless anyways.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>

tu: Dump out shader assembly when requested

We don't use the ir3 variant machinery, so we have to do this ourselves.

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4358>

aco: RA - move all std::function objects into proper functions

Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>

aco: move all needed helper containers to ra_ctx

Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>

aco: change live_out variables to std::unordered_set

Improves performance of live_var_analysis for larger shaders

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>

aco: change some std::map to std::unordered_map in register_allocation

This improves compile times slightly for larger shaders

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>

aco: refactor try_remove_trivial_phi() in RA

Minor refactoring to avoid some pointer chasing.
This patch also changes the live_out argument to be
passed by reference to avoid an unnecessary copy.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>

aco: improve speed of live_var_analysis

by merging live_sgprs and live_vgprs sets.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>

aco: during RA only insert into renames table if a variable got renamed

This improves the speed of register allocation.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>

aco: replace assignment hashmap by std::vector in register allocation

Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>

aco: improve register assignment when live-range splits are necessary

When finding a good place for a register, we can ignore
killed operands.

Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>

aco: improve hashing for value numbering

An improved hashing greatly reduces the number of collisions,
and thus, increases the speed for lookups in the hash table.
The hash function now uses Murmur3 written by Austin Appleby.

This patch also pre-reserves space for the hashmap to avoid rehashing.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>

aco: add explicit padding for all Instruction sub-structs

This patch also adds static_asserts on the size of Instructions
to ensure no internal padding is present.

Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>

aco: guarantee that Temp fits in 4 bytes

Reviewed-by: Timur Kristóf <timur.kristof@gmail.com>
Reviewed-by: Rhys Perry <pendingchaos02@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4130>

turnip: new clear/blit implementation with shader path fallback

The shader path is used to implement the following cases:
* stencil aspect mask on D24S8 (for image_to_buffer,buffer_to_image)
* clear/copy msaa destination (2D engine can't have msaa dest)

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>

turnip: add vk_format_is_snorm/is_float

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>

turnip: rework format helpers

* Take tile_mode as input directly
* tu6_format_gmem to tu6_base_format, use may not be limited to GMEM
* Add new helpers that will return the correct tile_mode as for image level
  as part of the format.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>

turnip: use dirty bits for dynamic viewport/scissor state

CmdClearAttachments shader path will overwrite this state, so it needs to
be re-emitted with dirty bits in that case.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>

turnip: save attachment samples in renderpass state

This is needed to be able to know the number of samples during
CmdClearAttachments which can be used while the framebuffer is unknown.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>

turnip: disable 8x msaa

Not everything supports 8x msaa, and the blob doesn't support it at all.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>

turnip: fix nir validate failure from push constant lowering

Fixes newly added checks in nir validate failing.

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>

turnip: split up gmem/tile alignment

Note: the x1/y1 align in tu6_emit_blit_scissor was broken

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>

turnip: RB_CCU_CNTL fixes

* Correct bypass value for a618
* Bypass value for blitter
* Don't set RB_CCU_CNTL again unnecessarily in tu6_emit_binning_pass

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>

freedreno/a6xx: set bypass RB_CCU_CNTL value for blitter

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>

freedreno/registers: add RB_CCU_CNTL bitfields

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/3783>

radv: allow TC-compat HTILE with GENERAL outside of render loops

This gives +8% with Wolfeinstein Youngblood on my Vega64, and
according to someone else, it also improves performance with Doom
2016 and Wolfenstein 2 (and probably other ID Tech games).

This improvement is because Youngblood uses GENERAL for the main
depth-only pass and TC-compat HTILE is now enabled with GENERAL if
we know that we are outside of a render loop. This obviously also
reduces the number of HTILE decompressions from/to GENERAL.

Note that Youngblood violates the Vulkan spec regarding render loops
because they are only allowed with input attachments. Expect possible
rendering issues if apps use render loops with the wrong way (ie.
without input attachmens) because HTILE might not be coherent if
a depth-stencil texture is sampled and rendered in the same draw.

Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2704
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4391>

radv: only enable TC-compat HTILE for images readable by a shader

If no texture fetches happen it's useless to enable TC-compat HTILE.

Because the driver currently doesn't support TC-compat HTILE for
storage images we don't have to check.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4497>

radv: only expose fp16 control features for chips with double rate fp16

This disables all fp16 shader control features on GFX8 because only
GFX9+ supports double rate packed math.

This improves consistency regarding other AMD Vulkan drivers.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4453>

radv: only expose storageInputOutput16 for chips with double rate fp16

This feature allows to use both 16-bit integers and 16-bit floats
as inputs/outputs.

This disables storageInputOutput16 on GFX8 because only GFX9+ supports
double rate packed math.

This improves consistency regarding other AMD Vulkan drivers.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4453>

radv: only expose shaderFloat16 for chips with double rate fp16

This disables shaderFloat16 on GFX8 because only GFX9+ supports
double rate packed math.

This improves consistency regarding other AMD Vulkan drivers and
it makes no sense to enable that feature without packed math.

This also reduces performance with Wolfeinstein Youngblood if
fp16 is forced enabled on GFX8, while it's similar on GFX9.

We might re-introduce that feature in the future with ACO support
if it ends up being faster and correct.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4453>

ac,radv: add ac_gpu_info::has_double_rate_fp16

Only GFX9+ support double rate packed math instructions.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Acked-by: Daniel Schürmann <daniel@schuermann.dev>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4453>

turnip: use buffer size instead of bo size for VFD_FETCH_SIZE

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4224>

turnip: improve vertex input handling

Emit vertexBindingDescriptionCount bindings, instead of one per attribute.

Verified with dEQP-VK.pipeline.vertex_input.*

Signed-off-by: Jonathan Marek <jonathan@marek.ca>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4224>

radeonsi: fix Segmentation fault during vaapi enc test

Fix Segmentation fault during vaapi enc test on Arcturus.

Signed-off-by: James Zhu <James.Zhu@amd.com>
Reviewed-by Leo Liu <leo.liu@amd.com>

Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4472>

radv: Use correct buffer count with variable descriptor set sizes.

Fixes dEQP-VK.binding_model.descriptorset_random.sets16.noarray.ubolimitlow.sbolimitlow.imglimitlow.iublimitlow.frag.ialimitlow.0

CC: <mesa-stable@lists.freedesktop.org>
Closes: https://gitlab.freedesktop.org/mesa/mesa/-/issues/2607
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4489>

radv: Whitespace fixup.

Review comment that I did, but forgot to git add before amending ...

From https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4334

Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4488>

radv: set sparseAddressSpaceSize to RADV_MAX_MEMORY_ALLOCATION_SIZE

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4487>

radv: check buffer size in vkCreateBuffer()

Fixes:

   dEQP-VK.api.buffer.basic.size_max_uint64

Signed-off-by: Samuel Iglesias Gonsálvez <siglesias@igalia.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4487>

radv: Consider maximum sample distances for entire grid.

The other pixels in the grid might have samples with a larger
distance than the (0,0) pixel.

Fixes dEQP-VK.pipeline.multisample.sample_locations_ext.verify_location.samples_8_packed
when CTS is compiled with clang.

CC: <mesa-stable@lists.freedesktop.org>
Reviewed-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4480>

radv: enable lowering of GS intrinsics for the LLVM backend

This replaces emit_vertex with:
   if (vertex_count < max_vertices) {
      emit_vertex_with_counter vertex_count ...
      vertex_count += 1
   }

Which is exactly what NIR->LLVM was doing but at NIR level. This
pass is already called by ACO.

pipeline-db changes on GFX10:
Totals from affected shaders:
SGPRS: 1952 -> 1912 (-2.05 %)
VGPRS: 2112 -> 2044 (-3.22 %)
Code Size: 189368 -> 185620 (-1.98 %) bytes
Max Waves: 494 -> 491 (-0.61 %)

No pipeline-db changes on other generations.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4182>

radv: remove radv_layout_has_htile() helper

The goal of this function was to return whether a depth-stencil image
has HTILE, in comparison to radv_layout_is_htile_compressed() which
is used to know whether a depth-stencil image has HTILE compressed.

These two functions are actually similar and they have never been
used for what they were supposed to. Remove radv_layout_has_htile()
in favour of radv_layout_is_htile_compressed() for now. If it's
needed in the future, I will re-introduce this concept properly.

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4389>

radv: cleanup creating the decompress/resummarize pipelines

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4389>

radv: rename extra graphics pipeline decompress/resummarize fields

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4389>

radv: rename decompress/resummarize depth/stencil functions

Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Part-of: <https://gitlab.freedesktop.org/mesa/mesa/-/merge_requests/4389>