gallium: add bits for clipping points as tris (d3d-style)

OpenGL does whole-point clipping, that is a large point is either fully
clipped or fully unclipped (the latter means it may extend beyond the
viewport as long as the center is inside the viewport). d3d9 (d3d10 has
no large points) however requires points to be clipped after they are
expanded to a rectangle. (Note some IHVs are known to ignore GL rules at
least with some hw/drivers.)
Hence add a rasterizer bit indicating which way points should be clipped
(some drivers probably will always ignore this), and add the draw interaction
this requires. Drivers wanting to support this and using draw must support
large points on their own as draw doesn't implement vp clipping on the
expanded points (it potentially could but the complexity doesn't seem
warranted), and the driver needs to do viewport scissoring on such points.

Conflicts:

src/gallium/drivers/llvmpipe/lp_context.c
src/gallium/drivers/llvmpipe/lp_state_derived.c

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>

mesa: fix GL_COLOR_SUM enum for drivers without ARB_vertex_program

Commit c13970808 (mesa: GL_EXT_secondary_color is not optional) changed

CHECK_EXTENSION2(EXT_secondary_color, ARB_vetex_program, cap)

to

CHECK_EXTENSION(ARB_vertex_program, cap)

However CHECK_EXTENSION2 checks that either extension is available, not
both. Remove the extension check entirely since the intent was for it to
always be enabled.

v2: Fix glGet*(GL_COLOR_SUM) too.  Suggested by Ian.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>
Cc: 9.2 10.0 <mesa-stable@lists.freedesktop.org>

llvmpipe: do constant buffer bounds checking in shaders

It's possible to bind a smaller buffer as a constant buffer, than
what the shader actually uses/requires. This could cause nasty
crashes. This patch adds the architecture to pass the maximum
allowable constant buffer index to the jit to let it make
sure that the constant buffer indices are always within bounds.
The behavior follows the d3d10 spec, which says the overflow
should always return all zeros, and overflow is only defined
as access beyond the size of the currently bound buffer. Accesses
beyond the declared shader constant register size are not
considered an overflow and expected to return garbage but consistent
garbage (we follow the behavior which some wlk tests expect which
is to return the actual values from the bound buffer).

Signed-off-by: Zack Rusin <zackr@vmware.com>
Reviewed-by: Jose Fonseca <jfonseca@vmware.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Roland Scheidegger <sroland@vmware.com>

nv50, nvc0: initialize ctx->sample_mask to ~0

Commit 95bf222603b (cso_context: Fix cso_context::sample_mask initial
value.) fixed the cso sample mask to be initialized to ~0. The cso code
is also careful not to needlessly call set_sample_mask, so we ended up
with the ctx->sample_mask never being set. This broke a number of
EXT_framebuffer_multisample piglit tests.

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>

mesa/main: Free ctx->DrawIndirectBuffer during teardown

ctx->DrawIndirectBuffer wasn't being free'd in _mesa_free_buffer_objects

With this patch, "valgrind --leak-check=full glxgears" on evergreen (CEDAR)
now shows:

LEAK SUMMARY:
   definitely lost: 0 bytes in 0 blocks
   indirectly lost: 0 bytes in 0 blocks
     possibly lost: 0 bytes in 0 blocks
   still reachable: 70,228 bytes in 651 blocks
        suppressed: 0 bytes in 0 blocks

Reviewed-by: Brian Paul <brianp@vmware.com>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>

st/dri: prevent leak of dri option default values

v2: Change comment style

CC: "10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeon: Move gfx/dma cs cleanup to r600_common_context_cleanup

The radeonsi code was not cleaning up either of these items leading to
leaked memory.

v2: Move cleanup to r600_common_context_cleanup instead of duplicating
    the logic for SI

CC: "10.0" <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>

mesa: Eliminate parameters to dd_function_table::Scissor

The i830 and i915 drivers used them, but they didn't really need to.
They will just be annoying in future patches.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

mesa: Eliminate parameters to dd_function_table::DepthRange

No driver uses them.  They will just be annoying in future patches.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

mesa: Eliminate parameters to dd_function_table::Viewport

No driver uses them.  They will just be annoying in future patches.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

radeon: Remove dead code

A future patch will rename some of the fields of gl_viewport_attrib, and
I don't want to update dead code that I can't test.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: Dave Airlie <airlied@redhat.com>

i915: Remove spurious calls to DepthRange

For both i830 and i915, the driver DepthRange function just calls
intelCalcViewport.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Cc: Eric Anholt <eric@anholt.net>

mesa: Add COMPRESSED_RGBA_S3TC_DXT1_EXT to COMPRESSED_TEXTURE_FORMATS for GLES

The ES and desktop GL specs diverge here.  Yay!

In desktop OpenGL, the driver can perform online compression of
uncompressed texture data.  GL_NUM_COMPRESSED_TEXTURE_FORMATS and
GL_COMPRESSED_TEXTURE_FORMATS give the application a list of formats
that it could ask the driver to compress with some expectation of
quality.  The GL_ARB_texture_compression spec calls this "suitable for
general-purpose usage."  As noted above, this means
GL_COMPRESSED_RGBA_S3TC_DXT1_EXT is not included in the list.

In OpenGL ES, the driver never performs compression.
GL_NUM_COMPRESSED_TEXTURE_FORMATS and GL_COMPRESSED_TEXTURE_FORMATS give
the application a list of formats that the driver can receive from the
application.  It is the *complete* list of formats.  The
GL_EXT_texture_compression_s3tc spec says:

    "New State for OpenGL ES 2.0.25 and 3.0.2 Specifications

        The queries for NUM_COMPRESSED_TEXTURE_FORMATS and
        COMPRESSED_TEXTURE_FORMATS include COMPRESSED_RGB_S3TC_DXT1_EXT,
        COMPRESSED_RGBA_S3TC_DXT1_EXT, COMPRESSED_RGBA_S3TC_DXT3_EXT,
        and COMPRESSED_RGBA_S3TC_DXT5_EXT."

Note that the addition is only to the OpenGL ES specification!

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
See-also: http://lists.freedesktop.org/archives/mesa-dev/2013-October/047439.html
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Brian Paul <brianp@vmware.com>
Cc: "10.0" <mesa-stable@lists.freedesktop.org>

scons: add new shaderimage.c file to the build

clover: Fix clover::keys and ::values to deal with r-value references properly.

Returning a reference is incorrect if the specified pair was a
temporary -- Instead of that, use decltype() to deduce the correct
return type qualifiers.  Fixes a crash in clCreateProgramWithBinary().

Reported-and-tested-by: "Dorrington, Albert" <albert.dorrington@lmco.com>

clover: Don't try to build programs created from a binary again.

According to the spec it's allowed to call clBuildProgram() on a
program created from a user-specified binary.  We don't need to do
anything to build the program in that case.

Reported-and-tested-by: "Dorrington, Albert" <albert.dorrington@lmco.com>

clover: Add missing fields to the clover::module serialization code.

Tested-by: "Dorrington, Albert" <albert.dorrington@lmco.com>

clover: Store map result into a temporary vector in clCreateProgramWithBinary.

This avoids the inefficient multiple evaluation of the map result in
the code below.  It should cause no functional changes.

Tested-by: "Dorrington, Albert" <albert.dorrington@lmco.com>

docs: Mark ARB_shader_image_load_store as work in progress.

Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

mesa: Validate image units when the texture state changes.

Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

mesa: Unbind deleted textures from the shader image units.

From ARB_shader_image_load_store:

   If a texture object bound to one or more image units is deleted by
   DeleteTextures, it is detached from each such image unit, as though
   BindImageTexture were called with <unit> identifying the image unit
   and <texture> set to zero.

Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

mesa: Add image parameter queries for ARB_shader_image_load_store.

v2: Fix off-by-one error in index parameter bound checking.

Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

mesa: Add ARB_shader_image_load_store to the extension table.

Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

glapi: Update dispatch XML files for ARB_shader_image_load_store.

And uncomment the relevant lines of the dispatch sanity test.

Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

mesa: Implement the GL entry points defined by ARB_shader_image_load_store.

v2: Name image format classes consistently, fix array and 3D teximage
    selection with layered = GL_FALSE, make sure that the
    user-specified layer is less than the number of texture layers,
    add some asserts.

Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

mesa: Add MESA_FORMAT_SIGNED_RG88 and _RG1616.

Including pack/unpack and texstore code.  ARB_shader_image_load_store
requires support for the GL_RG8_SNORM and GL_RG16_SNORM formats, which
map to MESA_FORMAT_SIGNED_GR88 and MESA_FORMAT_SIGNED_GR1616 on
little-endian hosts, and MESA_FORMAT_SIGNED_RG88 and
MESA_FORMAT_SIGNED_RG1616 respectively on big-endian hosts -- only the
former were already present, add support for the latter.

Acked-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

mesa: Add MESA_FORMAT_ABGR2101010.

Including pack/unpack and texstore code.  This texture format is a
requirement for ARB_shader_image_load_store.

Acked-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

mesa: Add driver interface for ARB_shader_image_load_store.

Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

mesa: Add state data structures required for ARB_shader_image_load_store.

v2: Increase MAX_IMAGE_UNITS to what i965 wants and add a separate
    MAX_IMAGE_UNIFORMS define, clarify a couple of comments.

Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Paul Berry <stereotype441@gmail.com>

mesa: Define helper function to get the number of texture layers.

And to check if it can have layers at all.  This will be used by the
implementation of ARB_shader_image_load_store.

v2: Fix constness of texobj argument, use assert and return reasonable
    default rather than calling unreachable() in default switch case.

Reviewed-by: Paul Berry <stereotype441@gmail.com>
Reviewed-by: Brian Paul <brianp@vmware.com>

st/mesa: use signed temporary variable to store _ColorDrawBufferIndexes

The temporary variable used to store _ColorDrawBufferIndexes must be
signed (GLint), otherwise the following conditional will be incorrectly
evaluated. Leading to crashes in the driver/mesa or accessing/writing
to arbitrary memory location. The bug dates back to 2009.

Cc: 10.0 9.2 9.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

automake: include the git sha in the opengl version string for oot builds

Acked-by: Chad Versace <chad.versace@linux.intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

mesa: use signed temporary variable to store _ColorDrawBufferIndexes

_ColorDrawBufferIndexes is defined as GLint* and using a GLuint*
will result in the first part of the conditional to be evaluated to
true always.

Unintentionally introduced by the following commit, this will result
in a driver segfault if one is using an old version of the piglit test

    bin/clearbuffer-mixed-format -auto -fbo

commit 03d848ea1003abefd8fe51a5b4a780527cd852af
Author: Marek Olšák <marek.olsak@amd.com>
Date:   Wed Dec 4 00:27:20 2013 +0100

    mesa: fix interpretation of glClearBuffer(drawbuffer)

    This corresponding piglit tests supported this incorrect behavior instead of
    pointing at it.

Cc: Marek Olšák <marek.olsak@amd.com>
Cc: 10.0 9.2 9.1 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Marek Olšák <marek.olsak@amd.com>
Signed-off-by: Emil Velikov <emil.l.velikov@gmail.com>

nouveau: add framebuffer validation callback

Fixes assertions when trying to attach textures to fbs with formats not
supported by the render engines.

See https://bugs.freedesktop.org/show_bug.cgi?id=73459

Signed-off-by: Ilia Mirkin <imirkin@alum.mit.edu>
Reviewed-by: Francisco Jerez <currojerez@riseup.net>

clover: Use cl_ulong in the maximum allocation size calculation to avoid overflow.

i965: Emit 3DSTATE_VF on Broadwell too.

It's not just for Haswell.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

i965: Disable workaround flush for push constants on Broadwell.

If it wasn't necessary for Haswell, it's likely not to be necessary for
Broadwell either.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

i965: Enable native ETC texture support on Broadwell.

Broadwell, like Baytrail, has native ETC texture support.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Eric Anholt <eric@anholt.net>

ilo: handle NULL renderbuffers correctly

Renderbuffers may be NULL since 9baa45f78b8ca7d66280e36009b6a685055d7cd6.

ilo: disable HiZ for misaligned levels

We need to disable HiZ for non-8x4 aligned levels, except for level 0, layer
0.  For the very first layer we can adjust Width and Height fields of
3DSTATE_DEPTH_BUFFER to make it aligned.

Specifically, add ILO_TEXTURE_HIZ and set the flag only for properly aligned
levels.  ilo_texture_can_enable_hiz() is updated to check for the flag.

In tex_layout_validate(), align the depth bo to 8x4 so that we can adjust
Width/Height of 3DSTATE_DEPTH_BUFFER without introducing out-of-bound access.

Finally in rectlist blitter, add the ability to adjust 3DSTATE_DEPTH_BUFFER.

ilo: use a helper to determine if HiZ is enabled

Add ilo_texture_can_enable_hiz and replace all checks for tex->hiz.bo by calls
to ilo_texture_can_enable_hiz().

ilo: decide on hiz first in texture allocation

Add tex_layout_init_hiz() before tex_layout_init_format() to decide whether
HiZ should be enabled.

On GEN6, because of layer offsetting, HiZ is enabled only when the texture is
non-mipmapped and non-array.  PIPE_USAGE_STAGING is also taken as a hint to
disable HiZ.

ilo: emit gen7_wa_pipe_control_wm_max_threads_stall on Haswell

Rename the workaround, as it is for 3DSTATE_PS instead of 3DSTATE_WM, and emit
it on Haswell too.

This does not fix any app, but an assertion failure.

ilo: use HALIGN_4 on GEN7 for depth buffers

The comment was no longer true since 6642381e7513926b847d6bc10bf590e1c0c54859.

ilo: OOM for HiZ is fatal on GEN6

On GEN6, HiZ and Separate Stencil Buffer must be enabled at the same time.

ilo: fix a HiZ bo leakage

Dereference the HiZ bo when the texture is destroyed.

ilo: simplify ilo_texture_set_slice_flags()

Call ilo_texture_get_slice() for the last slice so that we can get rid of the
duplicated assert().

egl-static: Fix build error.

Fix build regression introduced with commit
786af2f963925df2c2a6fb60b29a83e8340f03c7.

egl_pipe.c:46:38: fatal error: radeonsi/radeonsi_public.h: No such file or directory
 #include "radeonsi/radeonsi_public.h"
                                      ^

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73578
Signed-off-by: Vinson Lee <vlee@freedesktop.org>

radeonsi: Rename the commonly occurring rscreen variable.

The "r" stands for R600.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename the commonly occurring rctx/r600 variables.

The "r" stands for R600.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename r600_trace_emit->si_trace_emit.

I had previously considered that unsafe.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename R600->SI in some remaining defines.

I had previously considered that unsafe.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename radeonsi->si remaining identifiers in si_uvd.c.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename r600->si remaining identifiers in si_state_draw.c.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename r600->si remaining identifiers in si_resource.c.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename r600->si remaining identifiers in si_query.c.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename r600->si remaining identifiers in si_pipe.c.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename r600->si remaining identifier in si_hw_context.c.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename radeonsi->si remaining identifiers in si_compute.c.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename r600->si remaining identifiers in si_blit.c.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename r600->si for functions in si_pipe.h.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename r600->si for functions in si.h.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename r600->si for functions in si_resource.h.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename r600->si for structs in si_resource.h.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename r600->si for structs in si.h.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Rename r600->si for structs in si_pipe.h.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

radeonsi: Apply si_* file naming scheme.

Reviewed-by: Marek Olšák <marek.olsak@amd.com>

Use AC_PATH_TOOL instead of AC_PATH_PROG for llvm-config.

This should help with cross-compiling and multilib when $CHOST-specific
llvm-config is expected rather than build host default one.

It will help us a bit in Gentoo where we've started using
i686-pc-linux-gnu-llvm-config for 32-bit multilib LLVM.

Reviewed-by: Tom Stellard <thomas.stellard@amd.com>
Signed-off-by: Michał Górny <mgorny@gentoo.org>
Fixes: https://bugs.freedesktop.org/show_bug.cgi?id=73100
CC: "10.0" <mesa-stable@lists.freedesktop.org>

configure: Disable xvmc by default

The xvmc unit tests are failing on r300g and r600g.

Reviewed-by: Vinson Lee <vlee@freedesktop.org>

glsl: Remove exec_list iterators now that nothing uses them.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Replace iterators in ir_reader.cpp with ad-hoc list walking.

These can't use foreach_list since they want to skip over the first few
list elements.  Just doing the ad-hoc list walking isn't too bad.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Use a new foreach_two_lists macro for walking two lists at once.

When handling function calls, we often want to walk through the list of
formal parameters and list of actual parameters at the same time.
(Both are guaranteed to be the same length.)

Previously, we used a pattern of:

   exec_list_iterator 1st_iter = <1st list>.iterator();
   foreach_iter(exec_list_iterator, 2nd_iter, <2nd list>) {
      ...
      1st_iter.next();
   }

This was awkward, since you had to manually iterate through one of
the two lists.

This patch introduces a foreach_two_lists macro which safely walks
through two lists at the same time, so you can simply do:

   foreach_two_lists(1st_node, <1st list>, 2nd_node, <2nd list>) {
      ...
   }

v2: Rename macro from foreach_list2 to foreach_two_lists, as suggested
    by Ian Romanick.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Statically cast parameter exec_node to ir_variable.

Formal function parameters are always ir_variable objects, not an
arbitrary ir_instruction.  So there's no need to dynamically cast here.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Cast ir_call parameters to ir_rvalue, not ir_instruction.

A function call's parameters are always rvalues.  ir_rvalue may not
always be a subclass of ir_instruction in the future, so we should use
the right one.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Replace foreach_iter and iter.remove() with foreach_list_safe.

foreach_list_safe allows you to safely remove the current node.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Convert piles of foreach_iter to foreach_list_safe.

In these cases, we edit the list (or at least might be), so we use the
foreach_list_safe variant.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

glsl: Convert piles of foreach_iter to the newer foreach_list macro.

foreach_iter and exec_list_iterators have been deprecated for some time now;
we just hadn't ever bothered to convert code to the newer foreach_list
and foreach_list_safe macros.

In these cases, we aren't editing the list, so we can use foreach_list
rather than foreach_list_safe.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Matt Turner <mattst88@gmail.com>
Reviewed-by: Ian Romanick <ian.d.romanick@intel.com>

i965: Ensure that all necessary state is re-emitted if we run out of aperture.

Prior to this patch, if we ran out of aperture space during
brw_try_draw_prims(), we would rewind the batch buffer pointer
(potentially throwing some state that may have been emitted by
brw_upload_state()), flush the batch, and then try again.  However, we
wouldn't reset the dirty bits to the state they had before the call to
brw_upload_state().  As a result, when we tried again, there was a
danger that we wouldn't re-emit all the necessary state.  (Note: prior
to the introduction of hardware contexts, this wasn't a problem
because flushing the batch forced all state to be re-emitted).

This patch fixes the problem by leaving the dirty bits set at the end
of brw_upload_state(); we only clear them after we have determined
that we don't need to rewind the batch buffer.

Cc: 10.0 9.2 <mesa-stable@lists.freedesktop.org>
Reviewed-by: Eric Anholt <eric@anholt.net>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>

r600g: fix glClearBuffer by handling PIPE_CLEAR_COLORi flags correctly

also restructure the code

r600g: handle NULL colorbuffers correctly on R600-R700

r600g: handle NULL colorbuffers correctly on Evergreen

radeonsi: handle NULL colorbuffers correctly

Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>

gallium/util: easy fixes for NULL colorbuffers

Reviewed-by: Brian Paul <brianp@vmware.com>

st/mesa: bind NULL colorbuffers as specified by glDrawBuffers

An example why it is required:

    Let's say there's a fragment shader writing to gl_FragData[0..1].
    The user calls: glDrawBuffers(2, {GL_NONE, GL_COLOR_ATTACHMENT0});

    That means gl_FragData[0] is unused and gl_FragData[1] is written
    to GL_COLOR_ATTACHMENT0.

st/mesa was skipping the GL_NONE draw buffer, therefore gl_FragData[0]
was written to GL_COLOR_ATTACHMENT0, which was wrong.

This commit fixes it, but drivers must also be fixed not to crash when
binding NULL colorbuffers. There is also a new set of piglit tests for this.

The MSAA state also had to be fixed not to crash when reading fb->cbufs[0].

Reviewed-by: Brian Paul <brianp@vmware.com>

mesa: handle GL_NONE draw buffers correctly in glClear

Reviewed-by: Brian Paul <brianp@vmware.com>

st/mesa: use sRGB formats for MSAA resolving if destination is sRGB

Copied from the i965 driver, including the big comment.

Cc: 9.2 10.0 <mesa-stable@lists.freedesktop.org>

st/mesa: check depth and stencil writemask before clearing

st/mesa: always prefer pipe->clear over clear_with_quad (v2)

v2: clear depth and stencil together

st/egl: Flush resources before presentation

Fixes wayland regression on r600g due to fast clear introduced by commit
edbbfac6.

Signed-off-by: Marek Olšák <marek.olsak@amd.com>

dri: set yInverted default to GL_TRUE

yInverted is used by EGL_NOK_texture_from_pixmap to indicate that
window system rendering is y-inverted compared to OpenGL texture
representation. This extension is only known to be used with X11
window system where sane default is GL_TRUE.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=73371

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

egl_dri2: call dri2_add_configs_for_visuals after extensions set

dri2_add_config makes decisions based on NOK_texture_from_pixmap so
it needs to be enabled before calling dri2_add_configs_for_visuals.

Signed-off-by: Tapani Pälli <tapani.palli@intel.com>
Reviewed-by: Chad Versace <chad.versace@linux.intel.com>

mesa: Set the correct error in _mesa_BeginConditionalRender

Piglit was recently changed to expect the correct error code (piglit
commit 271b998), so it started failing on Mesa.  This corrects that
failing and adds some spec quotations to justify the errrors set.

The code was rearranged a little bit to match the order listed in the
spec.

Signed-off-by: Ian Romanick <ian.d.romanick@intel.com>
Reviewed-by: Matt Turner <mattst88@gmail.com>

i965: Delete duplicate write_timestamp function.

brw_queryobj.c needs a version of write_timestamp that works on all
generations for the QueryCounter() driver hook.  So there's no point in
duplicating it in gen6_queryobj.c.

Signed-off-by: Kenneth Graunke <kenneth@whitecape.org>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>
Reviewed-by: Eric Anholt <eric@anholt.net>

i965: Fix clears of layered framebuffers with mismatched layer counts.

Previously, Mesa enforced the following rule (from
ARB_geometry_shader4's list of criteria for framebuffer completeness):

  * If any framebuffer attachment is layered, all attachments must have
    the same layer count.  For three-dimensional textures, the layer count
    is the depth of the attached volume.  For cube map textures, the layer
    count is always six.  For one- and two-dimensional array textures, the
    layer count is simply the number of layers in the array texture.
    { FRAMEBUFFER_INCOMPLETE_LAYER_COUNT_ARB }

However, when ARB_geometry_shader4 was adopted into GL 3.2, this rule
was dropped; GL 3.2 permits different attachments to have different
layer counts.  This patch brings Mesa in line with GL 3.2.

In order to ensure that layered clears properly clear all layers, we
now have to keep track of the maximum number of layers in a layered
framebuffer.

Fixes the following piglit tests in spec/!OpenGL 3.2/layered-rendering:
- clear-color-all-types 1d_array mipmapped
- clear-color-all-types 1d_array single_level
- clear-color-mismatched-layer-count
- framebuffer-layer-count-mismatch

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>

main: check texture target when validating layered framebuffers.

From section 4.4.4 (Framebuffer Completeness) of the GL 3.2 spec:

    If any framebuffer attachment is layered, all populated
    attachments must be layered. Additionally, all populated color
    attachments must be from textures of the same target.

We weren't checking that the attachments were from textures of the
same target.

Reviewed-by: Anuj Phogat <anuj.phogat@gmail.com>
Reviewed-by: Chris Forbes <chrisf@ijw.co.nz>

i965/gen6/blorp: Remove redundant HiZ workaround

Commit 1a92881 added extra flushes to fix a HiZ hang in
WebGL Google Maps. With the extra flushes emitted by the previous two
patches, the flushes added by 1a92881 are redundant.

Tested with the same criteria as in 1a92881: by zooming in and out
continuously for 2 hours on Sandybridge Chrome OS (codename
Stumpy) without a hang.

CC: Kenneth Graunke <kenneth@whitecape.org>
CC: Stéphane Marchesin <marcheu@chromium.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>

i965/gen6/blorp: Set need_workaround_flush at top of blorp

Unconditionally set brw->need_workaround_flush at the top of gen6 blorp
state emission.

The art of emitting workaround flushes on Sandybridge is mysterious and
not fully understood. Ken and I believe that
intel_emit_post_sync_nonzero_flush() may be required when switching from
regular drawing to blorp.  This is an extra safety measure to prevent
undiscovered difficult-to-diagnose gpu hangs.

I verified that on ChromeOS, pre-patch, need_workaround_flush was not
set at the top of blorp, as Paul expected. To verify, I inserted the
following debug code at the top of gen6_blorp_exec(), restarted the ui,
and inspected the logs in /var/log/ui. The abort gets triggered so early
that the browser never appears on the display.

    static void
    gen6_blorp_exec(...)
    {
        if (!brw->need_workaround_flush) {
            fprintf(stderr, "chadv: %s:%d\n", __FILE__, __LINE__);
            abort();
        }
        ...
    }

CC: Kenneth Graunke <kenneth@whitecape.org>
CC: Stéphane Marchesin <marcheu@chromium.org>
Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>

i965/gen6/blorp: Set need_workaround_flush immediately after primitive

This patch makes the workaround code in gen6 blorp follow the pattern
established in the regular draw path. It shouldn't result in any
behavioral change.

On gen6, there are two places where we emit 3D_CMD_PRIM: brw_emit_prim()
and gen6_blorp_emit_primitive().  brw_emit_prim() sets
need_workaround_flush immediately after emitting the primitive, but
blorp does not. Blorp sets need_workaround_flush at the bottom of
brw_blorp_exec().

This patch moves the need_workaround_flush from brw_blorp_exec() to
gen6_blorp_emit_primitive().  There is no need to set
need_workaround_flush in gen7_blorp_emit_primitive() because the
workaround applies only to gen6.

Reviewed-by: Paul Berry <stereotype441@gmail.com>
Signed-off-by: Chad Versace <chad.versace@linux.intel.com>

docs: Import 10.0.2 release notes, add news item.

mesa: add missing SNORM formats in _mesa_base_fbo_format()

We weren't handling the LUMINANCE_SNORM, LUMINANCE_ALPHA_SNORM and
INTENSITY_SNORM cases.  Note that adding these cases here does not
require a driver to support rendering to these surface types.  If
the driver can't do it we'll report an incomplete framebuffer.

NVIDIA doesn't support GL_EXT_texture_snorm but their driver
accepts these formats in glRenderBufferStorage().

Reviewed-by: Jose Fonseca <jfonseca@vmware.com>